The architecture of the murein (peptidoglycan) in gram-negative bacteria: vertical scaffold or horizontal layer(s)?

The Mycobacterium tuberculosis protein LdtMt2 is a nonclassical transpeptidase required for virulence and resistance to amoxicillin

The peptidoglycan layer is a vital component of the bacterial cell wall. The existing paradigm describes the peptidoglycan network as a static structure that is cross-linked predominantly by 4-->3 transpeptide linkages. However, the nonclassical 3-->3 linkages predominate the transpeptide networking of the peptidoglycan layer of nonreplicating Mycobacterium tuberculosis. The molecular basis of these linkages and their role in the physiology of the peptidoglycan layer, virulence and susceptibility of M. tuberculosis to drugs remain undefined. Here we identify MT2594 as an L,D-transpeptidase that generates 3-->3 linkages in M. tuberculosis. We show that the loss of this protein leads to altered colony morphology, loss of virulence and increased susceptibility to amoxicillin-clavulanate during the chronic phase of infection. This suggests that 3-->3 cross-linking is vital to the physiology of the peptidoglycan layer. Although a functional homolog exists, expression of ldtMt2 is dominant throughout the growth phases of M. tuberculosis. 4-->3 transpeptide linkages are targeted by one of the most widely used classes of antibacterial drugs in human clinical use today, beta-lactams. Recently, meropenem-clavulanate was shown to be effective against drug-resistant M. tuberculosis. Our study suggests that a combination of L,D-transpeptidase and beta-lactamase inhibitors could effectively target persisting bacilli during the chronic phase of tuberculosis.

MreB drives de novo rod morphogenesis in Caulobacter crescentus via remodeling of the cell wall

MreB, the bacterial actin-like cytoskeleton, is required for the rod morphology of many bacterial species. Disruption of MreB function results in loss of rod morphology and cell rounding. Here, we show that the widely used MreB inhibitor A22 causes MreB-independent growth inhibition that varies with the drug concentration, culture medium conditions, and bacterial species tested. MP265, an A22 structural analog, is less toxic than A22 for growth yet equally efficient for disrupting the MreB cytoskeleton. The action of A22 and MP265 is enhanced by basic pH of the culture medium. Using this knowledge and the rapid reversibility of drug action, we examined the restoration of rod shape in lemon-shaped Caulobacter crescentus cells pretreated with MP265 or A22 under nontoxic conditions. We found that reversible restoration of MreB function after drug removal causes extensive morphological changes including a remarkable cell thinning accompanied with elongation, cell branching, and shedding of outer membrane vesicles. We also thoroughly characterized the composition of C. crescentus peptidoglycan by high-performance liquid chromatography and mass spectrometry and showed that MreB disruption and recovery of rod shape following restoration of MreB function are accompanied by considerable changes in composition. Our results provide insight into MreB function in peptidoglycan remodeling and rod shape morphogenesis and suggest that MreB promotes the transglycosylase activity of penicillin-binding proteins.

Chapter 2: Biogenesis of the cell wall and other glycoconjugates of Mycobacterium tuberculosis

The re-emergence of tuberculosis in its present-day manifestations - single, multiple and extensive drug-resistant forms and as HIV-TB coinfections - has resulted in renewed research on fundamental questions such as the nature of the organism itself, Mycobacterium tuberculosis, the molecular basis of its pathogenesis, definition of the immunological response in animal models and humans, and development of new intervention strategies such as vaccines and drugs. Foremost among these developments has been the precise chemical definition of the complex and distinctive cell wall of M. tuberculosis, elucidation of the relevant pathways and underlying genetics responsible for the synthesis of the hallmark moieties of the tubercle bacillus such as the mycolic acid-arabinogalactan-peptidoglycan complex, the phthiocerol- and trehalose-containing effector lipids, the phosphatidylinositol-containing mannosides, lipomannosides and lipoarabinomannosides, major immunomodulators, and others. In this review, the laboratory personnel who have been the focal point of some to these developments review recent progress towards a comprehensive understanding of the basic physiology and functions of the cell wall of M. tuberculosis.

Cell lysis and DNA extraction of gram-positive and gram-negative bacteria from whole blood in a disposable microfluidic chip

Sepsis caused by gram positive and gram negative bacteria is the leading cause of death in noncoronary ICUs and the tenth leading cause of death in the United States. We have developed a microfluidic sample preparation platform for rapid on-chip detection of infectious organisms for point-of-care diagnostics. The microfluidic chips are made of a robust thermoplastic and can be easily multiplexed for high throughput applications. Bacteria are lysed on-chip via hybrid chemical/mechanical method. Once lysed, the bacterial DNA is isolated using a microscale silica bead/polymer composite solid-phase-extraction (SPE) column. Lysis was confirmed using off-chip real time PCR. We isolated and detected both gram-negative (Escherichia coli) and gram-positive (Bacillussubtilis and Enterococcus faecalis) bacterial genomic DNA from microliter scale spiked whole human blood samples. The system performs better for gram-negative bacteria than it does for gram-positive bacteria, with limits of detection at 10(2) CFU/ml and 10(3)-10(4) CFU/ml, respectively. Total extraction times are less than one hour and can be further decreased by altering the channel geometry and pumping configuration.

Total synthesis of N-acetylglucosamine-1,6-anhydro-N-acetylmuramylpentapeptide and evaluation of its turnover by AmpD from Escherichia coli

The bacterial cell wall is recycled extensively during the course of cell growth. The first recycling event involves the catalytic action of the lytic transglycosylase enzymes, which produce an uncommon 1,6-anhydropyranose moiety during separation of the muramyl residues from the peptidoglycan, the major constituent of the cell wall. This product, an N-acetyl-beta-D-glucosamine-(1-->4)-1,6-anhydro-N-acetyl-beta-D-muramylpeptide, is either internalized to initiate the recycling process or diffuses into the milieu to cause stimulation of the pro-inflammatory responses by the host. We report the total syntheses of N-acetyl-beta-D-glucosamine-(1-->4)-1,6-anhydro-N-acetyl-beta-D-muramyl-L-Ala-gamma-D-Glu-meso-DAP-D-Ala-D-Ala (compound 1, the product of lytic transglycosylase action on the cell wall of gram-negative bacteria) and N-acetyl-beta-D-glucosamine-(1-->4)-1,6-anhydro-N-acetyl-beta-D-muramyl-L-Ala-gamma-D-Glu-L-Lys-D-Ala-D-Ala (compound 2, from lytic transglycosylase action on the cell wall of gram-positive bacteria). The syntheses were accomplished in 15 linear steps. Compound 1 is shown to be a substrate of the AmpD enzyme of the gram-negative bacterium Escherichia coli, an enzyme that removes the peptide from the disaccharide scaffold in the early cytoplasmic phase of cell wall turnover.

Method revealing bacterial cell-wall architecture by time-dependent isotope labeling and quantitative liquid chromatography/mass spectrometry

The molecular details of the biosynthesis and resulting architecture of the bacterial cell wall remain unclear but are essential to understanding the activity of glycopeptide antibiotics, the recognition of pathogens by hosts, and the processes of bacterial growth and division. Here we report a new strategy to elucidate bacterial cell-wall architecture based on time-dependent isotope labeling of bacterial cells quantified by liquid chromatography/accurate mass measurement mass spectrometry. The results allow us to track the fate of cell-wall precursors (which contain the vancomycin-binding site) in Enterococcus faecium, a leading antibiotic-resistant pathogen. By comparing isotopic enrichments of postinsertionally modified cell-wall precursors, we find that tripeptides and species without aspartic acid/asparagine (Asp/Asn, Asx) bridges are specific to mature cell wall. Additionally, we find that the sequence of cell-wall maturation varies throughout a cell cycle. We suggest that actively dividing E. faecium cells have three zones of unique peptidoglycan processing. Our results reveal new organizational characteristics of the bacterial cell wall that are important to understanding tertiary structure and designing novel drugs for antibiotic-resistant pathogens.

Bacterial cell curvature through mechanical control of cell growth

The cytoskeleton is a key regulator of cell morphogenesis. Crescentin, a bacterial intermediate filament-like protein, is required for the curved shape of Caulobacter crescentus and localizes to the inner cell curvature. Here, we show that crescentin forms a single filamentous structure that collapses into a helix when detached from the cell membrane, suggesting that it is normally maintained in a stretched configuration. Crescentin causes an elongation rate gradient around the circumference of the sidewall, creating a longitudinal cell length differential and hence curvature. Such curvature can be produced by physical force alone when cells are grown in circular microchambers. Production of crescentin in Escherichia coli is sufficient to generate cell curvature. Our data argue for a model in which physical strain borne by the crescentin structure anisotropically alters the kinetics of cell wall insertion to produce curved growth. Our study suggests that bacteria may use the cytoskeleton for mechanical control of growth to alter morphology.

Cell shape and cell-wall organization in Gram-negative bacteria

In bacterial cells, the peptidoglycan cell wall is the stress-bearing structure that dictates cell shape. Although many molecular details of the composition and assembly of cell-wall components are known, how the network of peptidoglycan subunits is organized to give the cell shape during normal growth and how it is reorganized in response to damage or environmental forces have been relatively unexplored. In this work, we introduce a quantitative physical model of the bacterial cell wall that predicts the mechanical response of cell shape to peptidoglycan damage and perturbation in the rod-shaped Gram-negative bacterium Escherichia coli. To test these predictions, we use time-lapse imaging experiments to show that damage often manifests as a bulge on the sidewall, coupled to large-scale bending of the cylindrical cell wall around the bulge. Our physical model also suggests a surprising robustness of cell shape to peptidoglycan defects, helping explain the observed porosity of the cell wall and the ability of cells to grow and maintain their shape even under conditions that limit peptide crosslinking. Finally, we show that many common bacterial cell shapes can be realized within the same model via simple spatial patterning of peptidoglycan defects, suggesting that minor patterning changes could underlie the great diversity of shapes observed in the bacterial kingdom.

Molecular organization of Gram-negative peptidoglycan

The stress-bearing component of the bacterial cell wall--a multi-gigadalton bag-like molecule called the sacculus--is synthesized from peptidoglycan. Whereas the chemical composition and the 3-dimensional structure of the peptidoglycan subunit (in at least one conformation) are known, the architecture of the assembled sacculus is not. Four decades' worth of biochemical and electron microscopy experiments have resulted in two leading 3-D peptidoglycan models: "Layered" and "Scaffold", in which the glycan strands are parallel and perpendicular to the cell surface, respectively. Here we resolved the basic architecture of purified, frozen-hydrated sacculi through electron cryotomography. In the Gram-negative sacculus, a single layer of glycans lie parallel to the cell surface, roughly perpendicular to the long axis of the cell, encircling the cell in a disorganized hoop-like fashion.

The peptidoglycan sacculus of Myxococcus xanthus has unusual structural features and is degraded during glycerol-induced myxospore development

Upon nutrient limitation cells of the swarming soil bacterium Myxococcus xanthus form a multicellular fruiting body in which a fraction of the cells develop into myxospores. Spore development includes the transition from a rod-shaped vegetative cell to a spherical myxospore and so is expected to be accompanied by changes in the bacterial cell envelope. Peptidoglycan is the shape-determining structure in the cell envelope of most bacteria, including myxobacteria. We analyzed the composition of peptidoglycan isolated from M. xanthus. While the basic structural elements of peptidoglycan in myxobacteria were identical to those in other gram-negative bacteria, the peptidoglycan of M. xanthus had unique structural features. meso- or LL-diaminopimelic acid was present in the stem peptides, and a new modification of N-acetylmuramic acid was detected in a fraction of the muropeptides. Peptidoglycan formed a continuous, bag-shaped sacculus in vegetative cells. The sacculus was degraded during the transition from vegetative cells to glycerol-induced myxospores. The spherical, bag-shaped coats isolated from glycerol-induced spores contained no detectable muropeptides, but they contained small amounts of N-acetylmuramic acid and meso-diaminopimelic acid.

High-Pressure Homogenization as a Non-Thermal Technique for the Inactivation of Microorganisms

In the pharmaceutical, cosmetic, chemical, and food industries high-pressure homogenization is used for the preparation or stabilization of emulsions and suspensions, or for creating physical changes, such as viscosity changes, in products. Another well-known application is cell disruption of yeasts or bacteria in order to release intracellular products such as recombinant proteins. The development over the last few years of homogenizing equipment that operates at increasingly higher pressures has also stimulated research into the possible application of high-pressure homogenization as a unit process for microbial load reduction of liquid products. Several studies have indicated that gram-negative bacteria are more sensitive to high-pressure homogenization than gram-positive bacteria supporting the widely held belief that high-pressure homogenization kills vegetative bacteria mainly through mechanical disruption. However, controversy exists in the literature regarding the exact cause(s) of cell disruption by high-pressure homogenization. The causes that have been proposed include spatial pressure and velocity gradients, turbulence, cavitation, impact with solid surfaces, and extensional stress. The purpose of this review is to give an overview of the existing literature about microbial inactivation by high-pressure homogenization. Particular attention will be devoted to the different proposed microbial inactivation mechanisms. Further, the different parameters that influence the microbial inactivation by high-pressure homogenization will be scrutinized.

Isolated peptidoglycan glycosyltransferases from different organisms produce different glycan chain lengths

Peptidoglycan is an essential component of bacterial cell wall. The glycan strands of peptidoglycan are synthesized by enzymes called peptidoglycan glycosyltransferases (PGTs). Using a high-resolution SDS-PAGE assay, we compared the glycan strand lengths of four different PGTs from three different organisms (Escherichia coli, Enterococcus faecalis, and Staphylococcus aureus). We report that each enzyme makes a polymer having an intrinsic characteristic length that is independent of the enzyme:substrate ratio. The glycan strand lengths vary considerably, depending on the enzyme. These results indicate that each enzyme must have some mechanism, as yet unknown, for controlling product length. The observation that different PGTs produce different length glycan chains may have implications for their cellular roles and for the three-dimensional structure of bacterial peptidoglycan.

Cell wall peptidoglycan architecture in Bacillus subtilis

The bacterial cell wall is essential for viability and shape determination. Cell wall structural dynamics allowing growth and division, while maintaining integrity is a basic problem governing the life of bacteria. The polymer peptidoglycan is the main structural component for most bacteria and is made up of glycan strands that are cross-linked by peptide side chains. Despite study and speculation over many years, peptidoglycan architecture has remained largely elusive. Here, we show that the model rod-shaped bacterium Bacillus subtilis has glycan strands up to 5 microm, longer than the cell itself and 50 times longer than previously proposed. Atomic force microscopy revealed the glycan strands to be part of a peptidoglycan architecture allowing cell growth and division. The inner surface of the cell wall has a regular macrostructure with approximately 50 nm-wide peptidoglycan cables [average 53 +/- 12 nm (n = 91)] running basically across the short axis of the cell. Cross striations with an average periodicity of 25 +/- 9 nm (n = 96) along each cable are also present. The fundamental cabling architecture is also maintained during septal development as part of cell division. We propose a coiled-coil model for peptidoglycan architecture encompassing our data and recent evidence concerning the biosynthetic machinery for this essential polymer.

Lytic transglycosylase MltB of Escherichia coli and its role in recycling of peptidoglycan strands of bacterial cell wall

The cell wall is an indispensable structure for the survival of bacteria and a target for antibiotics. Peptidoglycan is the major constituent of the cell wall, which is comprised of backbone repeats of N-acetylglucosamine (NAG) and N-acetylmuramic acid (NAM). A peptide stem is appended to the NAM unit, which in turn experiences cross-linking with a peptide from another peptidoglycan in the final steps of cell wall assembly. In the normal course of bacterial growth, as much as 60% of the parental cell wall is recycled, a process that is not fully understood. A polymeric cell wall is fragmented by the family of lytic transglycosylases, and certain key fragments are transported to the cytoplasm for recycling. The genes for the six known lytic transglycosylases of Escherichia coli were cloned, and the enzymes were purified in this study. It is shown that MltB is the only lytic transglycosylase to turn over a synthetic peptidoglycan fragment of two NAG-NAM repeats; hence this enzyme is likely to be the lytic transglycosylase responsible for processing of shorter peptidoglycan strands. Lytic transglycosylases have been proposed to go through an oxocarbenium species that would trap the 6-hydroxyl moiety of the glucosamine residue of muramic acid to generate the so-called 1,6-anhydromuramyl moiety. It is documented herein by characterization of the products of turnover that this process takes place to the total exclusion of the entrapment of a water molecule by the reactive intermediary oxocarbenium species. Furthermore, turnover of the E. coli sacculus (whole cell wall) by MltB was characterized. It is documented that each MltB molecule is able to process the cell wall 14000 times in the course of a single doubling time for E. coli.

Bacterial growth and cell division: a mycobacterial perspective

The genus Mycobacterium is best known for its two major pathogenic species, M. tuberculosis and M. leprae, the causative agents of two of the world's oldest diseases, tuberculosis and leprosy, respectively. M. tuberculosis kills approximately two million people each year and is thought to latently infect one-third of the world's population. One of the most remarkable features of the nonsporulating M. tuberculosis is its ability to remain dormant within an individual for decades before reactivating into active tuberculosis. Thus, control of cell division is a critical part of the disease. The mycobacterial cell wall has unique characteristics and is impermeable to a number of compounds, a feature in part responsible for inherent resistance to numerous drugs. The complexity of the cell wall represents a challenge to the organism, requiring specialized mechanisms to allow cell division to occur. Besides these mycobacterial specializations, all bacteria face some common challenges when they divide. First, they must maintain their normal architecture during and after cell division. In the case of mycobacteria, that means synthesizing the many layers of complex cell wall and maintaining their rod shape. Second, they need to coordinate synthesis and breakdown of cell wall components to maintain integrity throughout division. Finally, they need to regulate cell division in response to environmental stimuli. Here we discuss these challenges and the mechanisms that mycobacteria employ to meet them. Because these organisms are difficult to study, in many cases we extrapolate from information known for gram-negative bacteria or more closely related GC-rich gram-positive organisms.

Insights into the mode of action of chitosan as an antibacterial compound

Chitosan is a polysaccharide biopolymer that combines a unique set of versatile physicochemical and biological characteristics which allow for a wide range of applications. Although its antimicrobial activity is well documented, its mode of action has hitherto remained only vaguely defined. In this work we investigated the antimicrobial mode of action of chitosan using a combination of approaches, including in vitro assays, killing kinetics, cellular leakage measurements, membrane potential estimations, and electron microscopy, in addition to transcriptional response analysis. Chitosan, whose antimicrobial activity was influenced by several factors, exhibited a dose-dependent growth-inhibitory effect. A simultaneous permeabilization of the cell membrane to small cellular components, coupled to a significant membrane depolarization, was detected. A concomitant interference with cell wall biosynthesis was not observed. Chitosan treatment of Staphylococcus simulans 22 cells did not give rise to cell wall lysis; the cell membrane also remained intact. Analysis of transcriptional response data revealed that chitosan treatment leads to multiple changes in the expression profiles of Staphylococcus aureus SG511 genes involved in the regulation of stress and autolysis, as well as genes associated with energy metabolism. Finally, a possible mechanism for chitosan's activity is postulated. Although we contend that there might not be a single classical target that would explain chitosan's antimicrobial action, we speculate that binding of chitosan to teichoic acids, coupled with a potential extraction of membrane lipids (predominantly lipoteichoic acid) results in a sequence of events, ultimately leading to bacterial death.

Comparison of the immunostimulatory and proinflammatory activities of candidate Gram-positive endotoxins, lipoteichoic acid, peptidoglycan, and lipopeptides, in murine and human cells

The role of lipopolysaccharide (LPS) in the pathogenesis of Gram-negative septic shock is well established. The corresponding proinflammatory and immunostimulatory molecule(s) on the Gram-positive bacteria is less well understood, and its identification and characterization would be a key prerequisite in designing specific sequestrants of the Gram-positive endotoxin(s). We report in this paper the comparison of NF-kappaB-, cytokine- and chemokine-inducing activities of the TLR2 ligands, lipoteichoic acid (LTA), peptidoglycan (PGN), and lipopeptides, to LPS, a prototype TLR4 agonist, in murine macrophage cell-lines as well as in human blood. In murine cells, di- and triacyl liopopeptides are equipotent in their NF-kappaB inducing activity relative to LPS, but elicit much lower proinflammatory cytokines. However, both LPS and the lipopeptides potently induce the secretion of a pattern of chemokines that is suggestive of the engagement of a TLR4-independent TRIF pathway. In human blood, although the lipopeptides induce p38 MAP kinase phosphorylation and CD11b upregulation in granulocytes at ng/ml concentrations, they do not elicit proinflammatory cytokine production even at very high doses; LTA, however, activates neutrophils and induces cytokine secretion, although its potency is considerably lower than that of LPS, presumably due to its binding to plasma proteins. We conclude that, in human blood, the pattern of immunostimulation and proinflammatory mediator production elicited by LTA parallels that of LPS.

Native cellular architecture of Treponema denticola revealed by cryo-electron tomography

Using cryo-electron tomography, we are developing a refined description of native cellular structures in the pathogenic spirochete Treponema denticola. Tightly organized bundles of periplasmic flagella were readily observed in intact plunge-frozen cells. The periplasmic space was measured in both wild-type and aflagellate strains, and found to widen by less than the diameter of flagella when the latter are present. This suggests that a structural change occurs in the peptidoglycan layer to accommodate the presence of the flagella. In dividing cells, the flagellar filaments were found to bridge the cytoplasmic cylinder constriction site. Cytoplasmic filaments, adjacent to the inner membrane, run parallel to the tightly organized flagellar filaments. The cytoplasmic filaments may be anchored by a narrow plate-like structure. The tapering of the cell ends was conserved between cells, with a patella-shaped structure observed in the periplasm at the tip of each cytoplasmic cylinder. Several incompletely characterized structures have been observed in the periplasm between dividing cells, including a cable-like structure linking two cytoplasmic cylinders and complex foil-shaped structures.

Three-dimensional imaging of the highly bent architecture of Bdellovibrio bacteriovorus by using cryo-electron tomography

Bdellovibrio bacteriovorus cells are small deltaproteobacterial cells that feed on other gram-negative bacteria, including human pathogens. Using cryo-electron tomography, we demonstrated that B. bacteriovorus cells are capable of substantial flexibility and local deformation of the outer and inner membranes without loss of cell integrity. These shape changes can occur in less than 2 min, and analysis of the internal architecture of highly bent cells showed that the overall distribution of molecular machines and the nucleoid is similar to that in moderately bent cells. B. bacteriovorus cells appear to contain an extensive internal network of short and long filamentous structures. We propose that rearrangements of these structures, in combination with the unique properties of the cell envelope, may underlie the remarkable ability of B. bacteriovorus cells to find and enter bacterial prey.

Analysis of glycan polymers produced by peptidoglycan glycosyltransferases

Bacterial cells are surrounded by a cross-linked polymer called peptidoglycan, the integrity of which is necessary for cell survival. The carbohydrate chains that form the backbone of peptidoglycan are made by peptidoglycan glycosyltransferases (PGTs), highly conserved membrane-bound enzymes that are thought to be excellent targets for the development of new antibacterials. Although structural information on these enzymes recently became available, their mechanism is not well understood because of a dearth of methods to monitor PGT activity. Here we describe a direct, sensitive, and quantitative SDS-PAGE method to analyze PGT reactions. We apply this method to characterize the substrate specificity and product length profile for two different PGT domains, PBP1A from Aquifex aeolicus and PBP1A from Escherichia coli. We show that both disaccharide and tetrasaccharide diphospholipids (Lipid II and Lipid IV) serve as substrates for these PGTs, but the product distributions differ significantly depending on which substrate is used as the starting material. Reactions using the disaccharide substrate are more processive and yield much longer glycan products than reactions using the tetrasaccharide substrate. We also show that the SDS-PAGE method can be applied to provide information on the roles of invariant residues in catalysis. A comprehensive mutational analysis shows that the biggest contributor to turnover of 14 mutated residues is an invariant glutamate located in the center of the active site cleft. The assay and results described provide new information about the process by which PGTs assemble bacterial cell walls.

Multidimensional HRMAS NMR: a platform for in vivo studies using intact bacterial cells

In vivo analysis in whole cell bacteria, especially the native tertiary structures of the bacterial cell wall, remains an unconquered frontier. The current understanding of bacterial cell wall structures has been based on destructive analysis of individual components. These in vitro results may not faithfully reflect the native structural and conformational information. Multidimensional High Resolution Magic Angle Spinning NMR (HRMAS NMR) has evolved to be a powerful technique in a variety of in vivo studies, including live bacterial cells. Existing studies of HRMAS NMR in bacteria, technical consideration of its successful application, and current limitations in studying true human pathogens are briefly reviewed in this report.

Murein (peptidoglycan) structure, architecture and biosynthesis in Escherichia coli

The periplasmic murein (peptidoglycan) sacculus is a giant macromolecule made of glycan strands cross-linked by short peptides completely surrounding the cytoplasmic membrane to protect the cell from lysis due to its internal osmotic pressure. More than 50 different muropeptides are released from the sacculus by treatment with a muramidase. Escherichia coli has six murein synthases which enlarge the sacculus by transglycosylation and transpeptidation of lipid II precursor. A set of twelve periplasmic murein hydrolases (autolysins) release murein fragments during cell growth and division. Recent data on the in vitro murein synthesis activities of the murein synthases and on the interactions between murein synthases, hydrolases and cell cycle related proteins are being summarized. There are different models for the architecture of murein and for the incorporation of new precursor into the sacculus. We present a model in which morphogenesis of the rod-shaped E. coli is driven by cytoskeleton elements competing for the control over the murein synthesis multi-enzyme complexes.

Antibacterial natural products in medicinal chemistry--exodus or revival?

To create a drug, nature's blueprints often have to be improved through semisynthesis or total synthesis (chemical postevolution). Selected contributions from industrial and academic groups highlight the arduous but rewarding path from natural products to drugs. Principle modification types for natural products are discussed herein, such as decoration, substitution, and degradation. The biological, chemical, and socioeconomic environments of antibacterial research are dealt with in context. Natural products, many from soil organisms, have provided the majority of lead structures for marketed anti-infectives. Surprisingly, numerous "old" classes of antibacterial natural products have never been intensively explored by medicinal chemists. Nevertheless, research on antibacterial natural products is flagging. Apparently, the "old fashioned" natural products no longer fit into modern drug discovery. The handling of natural products is cumbersome, requiring nonstandardized workflows and extended timelines. Revisiting natural products with modern chemistry and target-finding tools from biology (reversed genomics) is one option for their revival.

In vitro high-resolution structural dynamics of single germinating bacterial spores

Although significant progress has been achieved in understanding the genetic and biochemical bases of the spore germination process, the structural basis for breaking the dormant spore state remains poorly understood. We have used atomic force microscopy (AFM) to probe the high-resolution structural dynamics of single Bacillus atrophaeus spores germinating under native conditions. Here, we show that AFM can reveal previously unrecognized germination-induced alterations in spore coat architecture and topology as well as the disassembly of outer spore coat rodlet structures. These results and previous studies in other microorganisms suggest that the spore coat rodlets are structurally similar to amyloid fibrils. AFM analysis of the nascent surface of the emerging germ cell revealed a porous network of peptidoglycan fibers. The results are consistent with a honeycomb model structure for synthetic peptidoglycan oligomers determined by NMR. AFM is a promising experimental tool for investigating the morphogenesis of spore germination and cell wall peptidoglycan structure.

Structural insights into the bactericidal mechanism of human peptidoglycan recognition proteins

Peptidoglycan recognition proteins (PGRPs) are highly conserved pattern-recognition molecules of the innate immune system that bind bacterial peptidoglycans (PGNs), which are polymers of alternating N-acetylglucosamine (NAG) and N-acetylmuramic acid (NAM) cross-linked by short peptide stems. Human PRGPs are bactericidal against pathogenic and nonpathogenic Gram-positive bacteria, but not normal flora bacteria. Like certain glycopeptide antibiotics (e.g., vancomycin), PGRPs kill bacteria by directly interacting with their cell wall PGN, thereby interfering with PGN maturation. To better understand the bactericidal mechanism of PGRPs, we determined the crystal structure of the C-terminal PGN-binding domain of human PGRP-I beta in complex with NAG-NAM-L-Ala-gamma-D-Glu-L-Lys-D-Ala-D-Ala, a synthetic glycopeptide comprising a complete PGN repeat. This structure, in conjunction with the previously reported NMR structure of a dimeric PGN fragment, permitted identification of major conformational differences between free and PGRP-bound PGN with respect to the relative orientation of saccharide and peptide moieties. These differences provided structural insights into the bactericidal mechanism of human PGRPs. On the basis of molecular modeling, we propose that these proteins disrupt cell wall maturation not only by sterically encumbering access of biosynthetic enzymes to the nascent PGN chains, but also by locking PGN into a conformation that prevents formation of cross-links between peptide stems in the growing cell wall.

Omiganan interaction with bacterial membranes and cell wall models. Assigning a biological role to saturation

Omiganan pentahydrochloride (ILRWPWWPWRRK-NH(2).5Cl) is an antimicrobial peptide currently in phase III clinical trials. This study aims to unravel the mechanism of action of this drug at the membrane level and address the eventual protective role of peptidoglycan in cell walls. The interaction of omiganan pentahydrochloride with bacterial and mammalian membrane models - large unilamellar vesicles of different POPC:POPG proportions - was characterized by UV-Vis fluorescence spectroscopy. The molar ratio partition constants obtained for the two anionic bacterial membrane models were very high ((18.9+/-1.3)x10(3) and (43.5+/-8.7)x10(3)) and about one order of magnitude greater than for the neutral mammalian models ((3.7+/-0.4)x10(3) for 100% POPC bilayers). At low lipid:peptide ratios there were significant deviations from the usual hyperbolic-like partition behavior of peptide vesicle titration curves, especially for the most anionic systems. Membrane saturation can account for such observations and mathematical models were derived to further characterize the peptide-lipid interaction under those conditions; a possible relation between saturation and MIC was deduced; this was supported by differential quenching studies of peptide internalization. Interaction with the bacterial cell wall was assessed using Staphylococcus aureus peptidoglycan extracts as a model. A strong partition towards the peptidoglycan mesh was observed, but not as large as for the membrane models.

Peptidoglycan recognition proteins: pleiotropic sensors and effectors of antimicrobial defences

Peptidoglycan recognition proteins (PGRPs) are innate immunity molecules that are present in most invertebrate and vertebrate animals. All PGRPs function in antimicrobial defence and are homologous to the prokaryotic peptidoglycan-lytic type 2 amidases. However, only some PGRPs have the catalytic activity that protects the host from excessive inflammation, and most PGRPs have diversified to carry out other host-defence functions. Insect and mammalian PGRPs defend host cells against infection through very different mechanisms. Insect PGRPs activate signal transduction pathways in host cells or trigger proteolytic cascades in the haemolymph, both of which generate antimicrobial effectors. By contrast, mammalian PGRPs are directly bactericidal. Here, we review these contrasting modes of action.

Role of membrane lipids in the mechanism of bacterial species selective toxicity by two α/β-antimicrobial peptides

We have previously shown that two synthetic antimicrobial peptides with alternating alpha- and beta-amino acid residues, designated simply as alpha/beta-peptide I and alpha/beta-peptide II, had toxicity toward bacteria and affected the morphology of bacterial membranes in a manner that correlated with their effects on liposomes with lipid composition similar to those of the bacteria. In the present study we account for the weak effects of alpha/beta-peptide I on liposomes or bacteria whose membranes are enriched in phosphatidylethanolamine (PE) and why such membranes are particularly susceptible to damage by alpha/beta-peptide II. The alpha/beta-peptide II has marked effects on unilamellar vesicles enriched in PE causing vesicle aggregation and loss of their internal aqueous contents. The molecular basis of these effects is the ability of alpha/beta-peptide II to induce phase segregation of anionic and zwitterionic lipids as shown by fluorescence and differential scanning calorimetry. This phase separation could result in the formation of defects through which polar materials could pass across the membrane as well as form a PE-rich membrane domain that would not be a stable bilayer. alpha/beta-Peptide II is more effective in this regard because, unlike alpha/beta-peptide I, it has a string of two or three adjacent cationic residues that can interact with anionic lipids. Although alpha/beta-peptide I can destroy membrane barriers by converting lamellar to non-lamellar structures, it does so only weakly with unilamellar vesicles or with bacteria because it is not as efficient in the aggregation of these membranes leading to the bilayer-bilayer contacts required for this phase conversion. This study provides further understanding of why alpha/beta-peptide II is more toxic to micro-organisms with a high PE content in their membrane as well as for the lack of toxicity of alpha/beta-peptide I with these cells, emphasizing the potential importance of the lipid composition of the cell surface in determining selective toxicity of anti-microbial agents.

Polar localization of the autotransporter family of large bacterial virulence proteins

Autotransporters are an extensive family of large secreted virulence-associated proteins of gram-negative bacteria. Secretion of such large proteins poses unique challenges to bacteria. We demonstrate that autotransporters from a wide variety of rod-shaped pathogens, including IcsA and SepA of Shigella flexneri, AIDA-I of diffusely adherent Escherichia coli, and BrkA of Bordetella pertussis, are localized to the bacterial pole. The restriction of autotransporters to the pole is dependent on the presence of a complete lipopolysaccharide (LPS), consistent with known effects of LPS composition on membrane fluidity. Newly synthesized and secreted BrkA is polar even in the presence of truncated LPS, and all autotransporters examined are polar in the cytoplasm prior to secretion. Together, these findings are consistent with autotransporter secretion occurring at the poles of rod-shaped gram-negative organisms. Moreover, NalP, an autotransporter of spherically shaped Neisseria meningitidis contains the molecular information to localize to the pole of Escherichia coli. In N. meningitidis, NalP is secreted at distinct sites around the cell. These data are consistent with a model in which the secretion of large autotransporters occurs via specific conserved pathways located at the poles of rod-shaped bacteria, with profound implications for the underlying physiology of the bacterial cell and the nature of bacterial pathogen-host interactions.

Single-step enantioselective amino acid flux analysis by capillary electrophoresis using on-line sample preconcentration with chemical derivatization

Capillary electrophoresis (CE) represents a versatile platform for integrating sample pretreatment with chemical analysis because of its ability to tune analyte electromigration and band dispersion properties in discontinuous electrolyte systems. In this article, a single-step method that combines on-line sample preconcentration with in-capillary chemical derivatization is developed for rapid, sensitive, and enantioselective analysis of micromolar levels of amino acids that lack intrinsic chromophores by CE with UV detection. Time-resolved electrophoretic studies revealed two distinct stages of amino acid band narrowing within the original long sample injection plug occurring both prior to and after in-capillary labeling via zone passing by ortho-phthalaldehyde/N-acetyl l-cysteine (OPA/NAC). This technique enabled direct analysis of d-amino acids in a 95% enantiomeric excess mixture with sub-micromolar detection limits and minimal sample handling, where the capillary functions as a preconcentrator, microreactor, and chiral selector. On-line sample preconcentration with chemical derivatization CE (SPCD-CE) was applied to study the enantioselective amino acid flux in Escherichia coli bacteria cultures, which demonstrated a unique l-Ala efflux into the extracellular medium. New strategies for high-throughput analyses of low-abundance metabolites are important for understanding fundamental physiological processes in bacteria required for screening the efficacy of new classes of antibiotics as well as altered metabolism in genetically modified mutant strains.

Nano-mechanical exploration of the surface and sub-surface of hydrated cells of Staphylococcus epidermidis

The surface of hydrated cells of Staphylococcus epidermidis has been probed using an atomic force microscope. While local force measurements over the surface of bacteria reveal a heterogeneous chemical surface, with heterogeneous mechanical properties, different kinds of force curves appear with high frequency, and are thought to provide information on features contributing strongly to the overall mechanical and surface behaviour of the cell. Force curves often present two different mechanical regimes, being the first one (outer) of about 48 nm thick, and presenting a local relative elasticity of about 0.08 N/m, which is about a third of the relative elasticity of the inner part of the cell wall, harder, with a relative elasticity of about 0.24 N/m, in water. Both regimes appears as straight lines in the force versus distance curves (the 'corresponding' stress-strain curves in contact mechanics), but hysteresis is observed between the approach and the retraction line in the inner regime, indicating a degree of viscoelasticity. No viscoelasticity is observed in the outer regime, however, which presents quite linear and juxtaposed approach-retraction lines. These kinds of force curves do not present measurable pull-off forces nor snap-in forces, which indicates an almost null interaction between tip and bacterial surface, which could be in agreement with the measured very high hydrophobicity of this strain. Another kind of force curve has been observed recurrently, showing peaks in the retraction curves. Adhesive pull-off forces were measured giving an average of about 2 nN. Interestingly, however, these force curves appear only when quite irregular and wavy retraction curves are present, from the very beginning of its trace (maximum indentation). This leads us to think that these pull-off forces measured by our AFM do not give information on surface forces-unbinding events at the surface of the bacteria, but could be related to events at the sub-surface of the cell surface. Oscillations seen in the retraction curve in the portion corresponding to the contact with the bacteria surface could be due to rupture phenomena within the multilayered cell wall architecture expected in Gram-positive bacteria as Staphylococcus epidermidis, which could result in local irreversible deformations of the cell surface. Imaging with a sharp tip in contact mode sometimes leads to surface damage. Force curves recorded over damaged parts of the cell surface showed a completely different behaviour, in many cases with two well-defined high-adhesion peaks, and also interestingly, with snap-in forces of about 0-2 nN, which seems to indicate a completely different electrical/hydrophobicity state only a few nanometers down from the surface. Similar indentation effects can occur in the contact of a bacterial cell with a solid surface, even when showing only atomic-molecular-scale roughness, thus interacting not only with the very surface of the cell, especially when soft layers are present in the outer. Our results highlight the importance of the cell surface mechanical properties and their interplay with purely surface properties when analyzing cell-material interaction, and show the AFM as a useful method for investigating this.

Native cell wall organization shown by cryo-electron microscopy confirms the existence of a periplasmic space in Staphylococcus aureus

The current perception of the ultrastructure of gram-positive cell envelopes relies mainly on electron microscopy of thin sections and on sample preparation. Freezing of cells into a matrix of amorphous ice (i.e., vitrification) results in optimal specimen preservation and allows the observation of cell envelope boundary layers in their (frozen) hydrated state. In this report, cryo-transmission electron microscopy of frozen-hydrated sections of Staphylococcus aureus D2C was used to examine cell envelope organization. A bipartite wall was positioned above the plasma membrane and consisted of a 16-nm low-density inner wall zone (IWZ), followed by a 19-nm high-density outer wall zone (OWZ). Observation of plasmolyzed cells, which were used to artificially separate the membrane from the wall, showed membrane vesicles within the space associated with the IWZ in native cells and a large gap between the membrane and OWZ, suggesting that the IWZ was devoid of a cross-linked polymeric cell wall network. Isolated wall fragments possessed only one zone of high density, with a constant level of density throughout their thickness, as was previously seen with the OWZs of intact cells. These results strongly indicate that the IWZ represents a periplasmic space, composed mostly of soluble low-density constituents confined between the plasma membrane and OWZ, and that the OWZ represents the peptidoglycan-teichoic acid cell wall network with its associated proteins. Cell wall differentiation was also seen at the septum of dividing cells. Here, two high-density zones were sandwiched between three low-density zones. It appeared that the septum consisted of an extension of the IWZ and OWZ from the outside peripheral wall, plus a low-density middle zone that separated adjacent septal cross walls, which could contribute to cell separation during division.

Too many strictures on structure

In a recent Opinion article in Trends in Microbiology, Dmitriev et al. proposed an alternative to the existing model of peptidoglycan structure, in which the cell wall is composed of chains that are perpendicular to the membrane (as opposed to horizontal) and form a scaffold interconnected by peptide branches. However, both this model and the classical model are based on underlying assumptions about pore sizes, composition and structural regularity that deserve careful consideration. Not only do the uncertainties surrounding these basic mechanical questions make it impossible to decide which model of peptidoglycan structure is correct, they also leave open the possibility that the real structure is an amalgam of these or other models that have yet to be described.

Three-dimensional structure of the bacterial cell wall peptidoglycan

The 3D structure of the bacterial peptidoglycan, the major constituent of the cell wall, is one of the most important, yet still unsolved, structural problems in biochemistry. The peptidoglycan comprises alternating N-acetylglucosamine (NAG) and N-acetylmuramic disaccharide (NAM) saccharides, the latter of which has a peptide stem. Adjacent peptide stems are cross-linked by the transpeptidase enzymes of cell wall biosynthesis to provide the cell wall polymer with the structural integrity required by the bacterium. The cell wall and its biosynthetic enzymes are targets of antibiotics. The 3D structure of the cell wall has been elusive because of its complexity and the lack of pure samples. Herein we report the 3D solution structure as determined by NMR of the 2-kDa NAG-NAM(pentapeptide)-NAG-NAM(pentapeptide) synthetic fragment of the cell wall. The glycan backbone of this peptidoglycan forms a right-handed helix with a periodicity of three for the NAG-NAM repeat (per turn of the helix). The first two amino acids of the pentapeptide adopt a limited number of conformations. Based on this structure a model for the bacterial cell wall is proposed.