Interference theory of metamaterial perfect absorbers

Development of frequency-tunable multiple-band terahertz absorber based on control of polarization angles

Controlling and tuning the spectral absorption response of metamaterial absorbers fabricated by arranging a set of resonators in a regular array is challenging. Polarization tunable multi-band terahertz resonant absorbers were developed using anisotropic microstructure arrays. The unit cell consisted of four pairs of H-shaped resonators of different sizes and a metallic ground plane separated by a dielectric layer. Discrete operating frequency shifts and dynamic amplitude tuning were observed by changing the polarization angle. The effect of the polarization angle on the absorption amplitude was evaluated. This work provides a concise approach to realize tunable absorption characteristics, which can be applied in sensors, detectors, and switches.

Vanadium dioxide based broadband THz metamaterial absorbers with high tunability: simulation study

With their unprecedented flexibility in manipulating electromagnetic waves, metamaterials provide a pathway to structural materials that can fill the so-called "THz gap". It has been reported that vanadium dioxide (VO₂) experiences a three orders of magnitude increase in THz electrical conductivity when it undergoes an insulator-to-metal transition. Here, we propose a VO₂ based THz metamaterial absorber exhibiting broadband absorptivity that arises from the multiple resonances supported by a delicately balanced doubly periodic array of VO₂ structures and numerically demonstrate that the corresponding absorption behavior is highly dependent on the VO₂'s THz electrical properties. Considering the phase transition induced dramatic change in VO₂'s material property, the proposed metamaterial absorbers have the potential for strong modulation and switching of broadband THz radiation.

Multiband terahertz absorber and selective sensing performance

Multiband terahertz absorbers are essential photonic components for responding to, manipulating, and modulating terahertz waves. In this work, improved electric split resonant ring arrays are used to demonstrate multiband terahertz wave absorption. The proposed design strategy is simple, practical, and significant. Experiments and simulations reveal perfect absorption at 0.918 THz and 1.575 THz for the transverse magnetic (TM) polarization and at 0.581, 1.294, and 1.556 THz for the transverse electric (TE) polarization. In addition, the weak resonant peaks that occurred in the experiments in both polarization states have been verified by the simulations. Furthermore, five concentration gradients of 2, 4-dichlorophenoxyacetic acid solutions and six concentration gradients of chlorpyrifos have been detected using the absorber. The lowest detectable concentration that could be monitored was 0.1 ppm. The absorption, intensity, and frequency shift values for the different solution concentrations at the resonant peaks were analyzed. The highest linear regression coefficients were 0.9862 and 0.9565 for the TE and TM polarizations, respectively. This multi-band absorber was demonstrated to be highly efficient in detecting pesticides for food safety applications.

Hollow-petal graphene metasurface for broadband tunable THz absorption

We propose a tunable and broadband terahertz (THz)-wave absorber based on the graphene metasurface, which consists of a layer of graphene-hollow-petal structure array and a bottom copper film separated by a 20-μm-thick lossless thermo plastic olefin polymer of amorphous structure layer. The mechanism of such a THz-wave absorber is numerically investigated and theoretically analyzed with the aid of a modified Fabry-Perot resonant model and finite element method. A large absorption efficiency of more than 90% in a frequency range of 2.66 THz ∼3.46  THz was obtained up to a THz-wave incident angle as large as 50°. The absorption bandwidth and absorptivity can be tuned by changing the bias voltage of the graphene metasurface Fermi level. This work indicates that our device has potential applications with respect to tunable sensors and smart absorbers.

Metal and graphene hybrid metasurface designed ultra-wideband terahertz absorbers with polarization and incident angle insensitivity

Terahertz electromagnetic (EM) wave absorbers are vital in photonics, however, they suffer from limited bandwidth. A new approach for ultra-wideband (UWB) terahertz absorber design is proposed with metal and graphene metasurfaces. The UWB characteristics are owing to three factors: (1) the metal metasurface boosts the surface plasmon-polaritons (SPPs) of the graphene metasurface which leads to confined field enhancement, (2) the merging and interaction of the resonances of the metal and graphene metasurfaces, and (3) the multiple reflections and superpositions between the metasurfaces and the gold layer. A prototype designed using a dual-ring metal metasurface, fishnet graphene metasurface, polyimide substrate and gold reflecting layer is proposed. One cell of the prototype includes one metal dual-ring unit and four graphene fishnet units. The proposed absorber has an UWB bandwidth of 6.46 THz (145%) for absorptivity larger than 0.9, with a high octave of 6.21. The proposed absorber is also insensitive to the polarization state and incident angle of the illuminating EM waves. Besides, the amplitude modulation depth in the 5-6 THz band is up to 95.4%. The physical mechanisms of the wideband operation are also discussed. The research in this work could offer a new thought for UWB absorber design, and has potential applications in terahertz imaging, sensors, photodetectors and modulators (e.g. [L. Peng, X. M. Li, X. Liu, X. Jiang and S. M. Li, Nanoscale Adv., 2000, 35, 3523]).

From Single-Dimensional to Multidimensional Manipulation of Optical Waves with Metasurfaces

Metasurfaces, 2D artificial arrays of subwavelength elements, have attracted great interest from the optical scientific community in recent years because they provide versatile possibilities for the manipulation of optical waves and promise an effective way for miniaturization and integration of optical devices. In the past decade, the main efforts were focused on the realization of single-dimensional (amplitude, frequency, polarization, or phase) manipulation of optical waves. Compared to the metasurfaces with single-dimensional manipulation, metasurfaces with multidimensional manipulation of optical waves show significant advantages in many practical application areas, such as optical holograms, sub-diffraction imaging, and the design of integrated multifunctional optical devices. Nowadays, with the rapid development of nanofabrication techniques, the research of metasurfaces has been inevitably developed from single-dimensional manipulation toward multidimensional manipulation of optical waves, which greatly boosts the application of metasurfaces and further paves the way for arbitrary design of optical devices. Herein, the recent advances in metasurfaces are briefly reviewed and classified from the viewpoint of different dimensional manipulations of optical waves. Single-dimensional manipulation and 2D manipulation of optical waves with metasurfaces are discussed systematically. In conclusion, an outlook and perspectives on the challenges and future prospects in these rapidly growing research areas are provided.

Terahertz Field Confinement in Nonlinear Metamaterials and Near-Field Imaging

This article reviews recent advances in terahertz science and technology that rely on confining the energy of incident terahertz radiation to small, very sub-wavelength sized regions. We focus on two broad areas of application for such field confinement: metamaterial-based nonlinear terahertz devices and terahertz near-field microscopy and spectroscopy techniques. In particular, we focus on field confinement in: terahertz nonlinear absorbers, metamaterial enhanced nonlinear terahertz spectroscopy, and in sub-wavelength terahertz imaging systems.

Implementing infrared metamaterial perfect absorbers using dispersive dielectric spacers

A typical metamaterial perfect absorber (MPA) is comprised of a metamaterial layer, a dielectric spacer, and a ground plane. The conventional spacer material is usually a lossy dielectric with little-dispersion for the purpose of easing the design and optimization procedure of the MPA. In this paper, we present the design, fabrication, and characterization of metamaterial perfect absorbers with a highly dispersive spacer, which is compatible with functional microelectromechanical systems. The measured dispersive permittivity of a silicon nitride thin film is used in modeling the absorption response of MPAs with rigorous coupled wave analysis. Different designs of MPA structures are fabricated and characterized. Spectroscopy data shows two perfect absorption peaks in wavelengths ranging from 8 μm to 20 μm, which supports the theoretical calculation and numerical simulation. The dispersion of silicon nitride enables the shared resonant modes of the two peak wavelengths and decreases the wavelength shift led by variations in structural parameters. We demonstrate that the use of dispersive dielectric materials in MPAs potentiates various functional devices.

An ultra-flexible plasmonic metamaterial film for efficient omnidirectional and broadband optical absorption

An omnidirectional and broadband optical absorber has long been pursued for its wide application in optics, sensing and energy fields. The recent development of flexible and non-planar optoelectronic devices, however, poses a great challenge to fabricate an optical absorber with excellent mechanical flexibility. Here, based on a facile solution method, we demonstrate an ultra-flexible plasmonic metamaterial film (PMF), which is a composite of gold nanoparticles (Au NPs) and aramid nanofibers, to achieve omnidirectional and broadband optical absorption. Due to the comprehensive contributions of the anti-reflection effect of the PMF surface, localized surface plasmon resonances of the Au NPs, and non-resonant decay of light inside the nanocomposite, the PMF exhibits highly efficient omnidirectional and broadband absorption at visible and near-infrared frequencies. In addition, it also presents exceptional mechanical and fast collective light-heating properties, which makes it promising to be applied on flexible and non-planar photo-thermal devices.

High-Temperature Refractory Metasurfaces for Solar Thermophotovoltaic Energy Harvesting

Solar energy promises a viable solution to meet the ever-increasing power demand by providing a clean, renewable energy alternative to fossil fuels. For solar thermophotovoltaics (STPV), high-temperature absorbers and emitters with strong spectral selectivity are imperative to efficiently couple solar radiation into photovoltaic cells. Here, we demonstrate refractory metasurfaces for STPV with tailored absorptance and emittance characterized by in situ high-temperature measurements, featuring thermal stability up to at least 1200 °C. Our tungsten-based metasurface absorbers have close-to-unity absorption from visible to near-infrared and strongly suppressed emission at longer wavelengths, while our metasurface emitters provide wavelength-selective emission spectrally matched to the band-edge of InGaAsSb photovoltaic cells. The projected overall STPV efficiency is as high as 18% when a fully integrated absorber/emitter metasurface structure is employed, which is comparable to the efficiencies of the best currently available commercial single-junction PV cells and can be further improved to potentially exceed those in mainstream photovoltaic technologies. Our work opens a path forward for high-performance STPV systems based on refractory metasurface structures.

Conductive polymer for ultra-broadband, wide-angle, and polarization-insensitive metamaterial perfect absorber

We numerically and experimentally investigate a broadband, polarization-independent and wide-incident-angle metamaterial perfect absorber (MPA) based on conductive polymer. By optimizing the electrical conductivity of the polymer, a 16.7 GHz broadband MPA is observed with the absorptivity greater than 80% for both transverse magnetic and electric polarization. The measurement results performed in the range 8-18 GHz show a diametrical concatenation with simulation results and theoretical analysis. The absorption mechanism is explained by demonstrating the influence of polymer conductivity on the dissipated power, the equivalent impedance, and the induced electric field. Our work may contribute to further studies on broadband MPA using for various applications.

Multi-functional Device with Switchable Functions of Absorption and Polarization Conversion at Terahertz Range

Terahertz electromagnetic (EM) wave components usually have a single function, such as they can only convert the polarization state of an incident wave or absorb the incident energy, which would be a limitation for their applications. To make a breakthrough, a multi-functional device (MFD) is proposed in this paper, and it is capable of switching between absorption mode and polarization conversion mode. The device has a low-profile and simple structure, and it is constructed by graphene-based absorbing metasurface (AM) and gold-based polarization conversion metasurface (PCM). By controlling the chemical potential (μ_c) of the graphene, the leading role is transferred between the AM and the PCM, which leads to steerable absorption and polarization conversion (PC) modes. For the PC mode, the simulated polarization conversion ratio (PCR) is larger than 0.9 in the 2.11-3.63-THz band (53.0% at 2.87 THz). For the absorption mode, the simulated absorptivity is larger than 80% in the 1.59-4.54-THz band (96.4% at 3.06 THz). The physical mechanisms and operating characteristics of the MFD are discussed. This research has potential applications in terahertz imaging, sensors, photodetectors, and modulators.

Tunable broadband terahertz absorber based on multilayer graphene-sandwiched plasmonic structure

We numerically demonstrate a tunable broadband terahertz absorber with near-unity absorption by using multilayer graphene ribbons sandwiched in a plasmonic integrated structure. By stacking slightly different widths of graphene ribbons in a sandwiched configuration, the absorption bandwidth can be increased because of the different resonant modes closely positioned together. The absorption spectrum's center frequency can be manipulated by varying the graphene's chemical potential, which provides a flexible way to design and optimize absorption property after fabrication. Furthermore, the structure can tolerate a wide range of incident angles, while the improved structure with graphene nanoparticles also shows polarization-independent feature. In this routine, stacking more graphene ribbons or particles with well-designed dimensions can further increase the bandwidth, as long as the metamaterial dimension satisfies the sub-wavelength condition. Therefore, our research provides an important theoretical guide for designing various graphene-based tunable broadband absorbers at terahertz, infrared, and microwave frequencies. This may have promising applications in imaging, sensing, and novel optoelectronic devices.

Plasmonic Metasurface Absorber Based on Electro-Optic Substrate for Energy Harvesting

A highly efficient and broad light absorber capable of wide-angle absorption in the visible and near infrared range is presented and numerically investigated for energy harvesting in a simple geometry. According to the calculated results, the proposed device has a peak absorption level of about 99.95%. The actual absorption efficiency is 76.35%, which is approaching that of complex multilayer absorbers with 88 layers working in the wavelength range of 300 nm to 2000 nm. The electro-optic material has the potential of shifting the absorption peak position, compensating fabrication errors and thus reducing the fabrication technique difficulties. Also, the high electro-optic tunability can be used for filters, infrared detection, and imaging applications. More directly, the proposed absorber can be potentially deployed in solar cells and solar thermals.

Surface enhanced perfect absorption in metamaterials with periodic dielectric nanostrips on silver film

Integrated dielectric metamaterials with plasmonic structures can cause drastic optical resonances and strengthen the capacity of light absorption. Here, we describe the optical properties of silicon nanoarrays on a thin silver film for extreme light confinement at subwavelength nanoscales. We attain the nearly total absorption in silicon nanostrips, which support magnetic quadruple Mie-type resonances in the visible regions. The Mie resonant field of the dielectric nanostrip engages the screening response of the silver film, resulting in plasmon resonance configuration and thus achieving perfect light absorption in the dielectric nanostrip. Moreover, we can attain similar results in other nanostructures, such as silicon cylinder and rhombus column arrays. Because it can sustain hybridized plasmon modes and magnetic modes, the combined system will benefit the application of solar energy accumulation.

Tunable terahertz metamaterial absorber based on Dirac semimetal films

In this paper, the tunable properties of metamaterial absorbers based on 3D Dirac semimetal films (DSFs) in the terahertz (THz) regime are discussed in theory. We consider the absorbers with square-shaped, circular-patch, and cross-shaped resonators. These resonances are theoretically polarization-insensitive at normal incidence because of their 90° rotational symmetry and can achieve perfect absorption in numerical simulation. We then introduce dual-band and broadband absorbers by combining two DSF-based square-shaped (or circular-patch) resonators into one unit cell with different sizes. Unlike with a conventional metal-based absorber, the absorption of a DSF-based absorber can be dynamically tuned by varying the Fermi energy instead of refabricating the structures. Moreover, the DSFs can be regarded as a "Salisbury screen" of an absorber to block the transmission at the THz frequencies, which can be more convenient than graphene in the application of a tunable absorber. Our designs have potential applications in various fields such as sensors, thermal detectors, and imagers.

Dual-Band Perfect Metamaterial Absorber Based on an Asymmetric H-Shaped Structure for Terahertz Waves

We designed an ultra-thin dual-band metamaterial absorber by adjusting the side strips’ length of an H-shaped unit cell in the opposite direction to break the structural symmetry. The dual absorption peaks approximately 99.95% and 99.91% near the central resonance frequency of 4.72 THz and 5.0 THz were obtained, respectively. Meanwhile, a plasmon-induced transmission (PIT) like reflection window appears between the two absorption frequencies. In addition to theoretical explanations qualitatively, a multi-reflection interference theory is also investigated to prove the simulation results quantitatively. This work provides a way to obtain perfect dual-band absorption through an asymmetric metamaterial structure, and it may achieve potential applications in a variety of fields including filters, sensors, and some other functional metamaterial devices.

Chiral metamaterials via Moiré stacking

Chiral metamaterials have attracted strong interest due to their versatile capabilities in spin-dependent light manipulation. Benefiting from advancements in nanofabrication and mechanistic understanding of chiroptical effects, chiral metamaterials have shown potential in a variety of applications including circular polarizers, chiral sensors, and chiroptical detectors. Recently, chiral metamaterials made by moiré stacking, superimposing two or more periodic patterns with different lattice constants or relative spatial displacement, have shown promise for chiroptical applications. The moiré chiral metamaterials (MCMs) take advantage of lattice-dependent chirality, giving cost-effective fabrication, flexible tunability, and reconfigurability superior to conventional chiral metamaterials. This feature article focuses on recent progress of MCMs. We discuss optical mechanisms, structural design, fabrication, and applications of the MCMs. We conclude with our perspectives on the future opportunities for the MCMs.

Polarization-independent and angle-insensitive broadband absorber with a target-patterned graphene layer in the terahertz regime

We propose a broadband tunable metamaterial absorber with near-unity absorption in the terahertz regime based on a target-patterned graphene sheet. Due to gradient diameter modulation of the graphene sheet and circular symmetry of the unit cell, broadband and polarization-independent properties are achieved in the absorber. A full-wave numerical simulation is performed, and the results show that the absorber's bandwidth of 90% terahertz absorption reaches 1.57 THz with a central frequency of 1.83 THz under normal incidence. At oblique incidence, the broadband absorption of the absorber remains more than 75% over a wide incidence angles up to 60°for the transverse electric (TE) mode and 75°for the transverse magnetic (TM) mode. Furthermore, tunable property is implemented and the peak absorption of the absorber can be tuned from 19% to near 100% by changing the Fermi energy of the graphene sheet from 0 to 0.9 eV via electrostatic doping. The absorber is scalable to the infrared and visible frequencies, which could be used as tunable sensors, filters and photovoltaic devices.

Broadband MoS2-based absorber investigated by a generalized interference theory

In this paper, a broadband absorber utilizing monolayer molybdenum disulfide (MoS₂) is proposed, and a generalized interference theory (GIT) is derived to investigate this absorber. Using the hybrid Lorentz-Drude and Gaussian model of monolayer MoS₂ and the dyadic Green's functions, the propagation properties of monolayer MoS₂ are first investigated. Then, a sandwich-like MoS₂-based absorber design is proposed in the visible regime. The sandwich-like structure is mounted on a fully reflective gold mirror, which forms a Fabry-Perot resonator to strengthen light-matter interactions and enhance the absorption. To numerically calculate the absorption performance of this absorber, the GIT is next derived from interference theory. The numerical results indicate that an absorption ≥ 90% is obtained for a range of wavelengths (λ) from 389 to 517 nm, and this absorber can operate well, even with an angle of incidence up to 60°, which also verifies the prediction of the MoS₂-based absorber mainly operating at λ < 700 nm. Afterward, the operating mechanism of the proposed design is determined using the theory of destructive interference. Finally, the proposed design and derived GIT are validated by a simulation using commercial electromagnetic software. The derived GIT drives the numerical investigation of the multilayer structure with various polarization types and angles of incidence of the waves, and the MoS₂-based absorber can be used in several applications such as photoelectric storage and photoelectric detection.

Design and performance of a terahertz absorber based on patterned graphene

Modern terahertz (THz) technology offers the advantage of enhanced target detection ability with high spatial and temporal resolutions in the THz band, which makes it a formidable threat to stealth targets. Consequently, THz absorbers have outstanding potential as an electromagnetic countermeasure. In this Letter, we design, fabricate, and characterize a THz absorber based on patterned graphene. We present the transfer, photolithography, and etching processes involved in graphene patterning, as well as the experimental measurements of the fabricated absorber. Our simulations show that with an increase in the Fermi energy, the performance of the designed absorber gradually improves and, finally, decreases slightly. Further, the absorption bandwidth first broadens and then narrows slightly. The effective bandwidth with absorption ≥90% ranges from 1.54 to 2.23 THz, with the relative bandwidth (RBW) reaching about 36.6%. Although the measured RBW (from ∼12% to ∼14% and then to ∼8%) slightly deviates from the simulated one, the position of the resonant frequency is well matched between theory and experiment. Moreover, we illuminate the absorption mechanism using the theory of destructive interference. This Letter can significantly contribute to the design, manufacture, and application of patterned graphene-based THz absorbers.

Electrically Tunable Broadband Terahertz Absorption with Hybrid-Patterned Graphene Metasurfaces

We numerically demonstrate a broadband terahertz (THz) absorber that is based on a hybrid-patterned graphene metasurface with excellent properties of polarization insensitivity, wide-angle, and active tunability. Our design is made up of a single-layer graphene with periodically arranged hybrid square/disk/loop patterns on a multilayer structure. We find that broadband absorption with 90% terahertz absorbance and the fractional bandwidth of 84.5% from 1.38 THz to 3.4 THz can be achieved. Because of the axisymmetric configuration, the absorber demonstrates absolute polarization independence for both transverse electric (TE) and transverse magnetic (TM) polarized terahertz waves under normal incidence. We also show that a bandwidth of 60% absorbance still remains 2.7 THz, ranging from 1.3 THz to 4 THz, for a wide incident angle ranging from 0° to 60°. Finally, we find that by changing the graphene Fermi energy from 0.7 eV to 0 eV, the absorbance of the absorbers can be easily tuned from more than 90% to lower than 20%. The proposed absorber may have promising applications in terahertz sensing, detecting, imaging, and cloaking.

Theory of microscopic meta-surface waves based on catenary optical fields and dispersion

Surface waves bounded by subwavelength-structured surfaces have many exotic electromagnetic properties different from those supported by smooth surfaces. However, there is a long-standing misconception, claiming that these waves must propagate along the macroscopic interface. In this paper, we describe in detail the microscopic meta-surface wave (M-wave) in artificial subwavelength structures. It is shown that the waves penetrating macroscopic surfaces share the essence of most surface waves (i.e., they spread along the microscopic interfaces, formed by adjacent constitutive materials). Equivalent circuit theory and transfer matrix method have been adopted to quantitatively describe these M-waves with high accuracy in the form of catenary optical fields and dispersion. Based on these analyses, novel omnidirectional band-stop filters and wide-angle beam deflectors are designed with operational angles up to 88°. We believe these results may provide many new perspectives for both the understanding and design of functional subwavelength structures.

Modeling the longitudinal intensity pattern of diffraction resistant beams in stratified media

In this paper, we study the propagation of the frozen wave (FW)-type beams through non-absorbing stratified media and develop a theoretical method capable of providing the desired spatially shaped diffraction-resistant beam in the last material medium. In this context, we also develop a matrix method to deal with stratified media with a large number of layers. Additionally, we undertake some discussion about minimizing reflection of the incident FW beam on the first material interface by using thin films. Our results show that it is indeed possible to obtain the control, on demand, of the longitudinal intensity pattern of a diffraction-resistant beam, even after it undergoes multiple reflections and transmissions at the layer interfaces. Remote sensing, medical and military applications, noninvasive optical measurements, etc., are some fields that can benefit from the method here proposed.

Angular- and Polarization-insensitive Ultrathin Double-layered Metamaterial Absorber for Ultra-wideband Application

We proposed an ultra-thin polarization-insensitive metamaterial absorber (MMA) for ultra-wideband and wide incident angle operation. The MMA is composed of double-layer symmetric split rings (SSRs) connected with two orthogonally-arranged bars and the ground metallic plane separated by two identical substrates. Multiple metallic layers and scalabilities are employed to provide broadband absorptivity based on the cooperated mechanisms of the Ohmic loss and the Fabry-Perot interference. To further broaden the absorption bandwidth, four lumped resistors are loaded with the SSRs on the top metallic layer. By this means, an ultra-wideband absorbance is achieved nearly in 4~22 GHz, two gentle slope belts with absorptivity over 60% and 80% in 4~12 GHz and 12~22 GHz, respectively. The whole structure is with an ultrathin thickness of 2.4 mm, which is 0.032λ_low and 0.176λ_high corresponds to the lowest and highest absorption frequency separately. Meanwhile, the symmetric structure enables the MMA of satisfactory stability for polarization and wide incident angles. Numerical and experimental results prove the capability of the proposed MMA for ultra-wideband absorbance.

Tunable, omnidirectional, and nearly perfect resonant absorptions by a graphene-hBN-based hole array metamaterial

In this paper, we propose an electrically tunable mid-infrared plasmonic-phononic absorber with omnidirectional and polarization insensitive nearly perfect resonant absorption characteristics. The absorber consists of a graphene/hexagonal boron nitride (hBN)/graphene multilayer on top of a gold bottom reflector separated by a dielectric spacer. The graphene/hBN/graphene multilayer is patterned as a hole array in square lattice. We analytically and numerically prove that, due to the support of hybrid plasmon-phonon-polaritons, nearly perfect multi-resonant absorption peaks with high quality factors are obtained both inside and outside of the Reststrahlen band of hBN. As a result of the hybridization of graphene plasmons with the hyperbolic phonon polaritons of hBN, the high quality resonant absorptions of the metamaterial are almost unaffected by decreasing the phenomenological electron relaxation time of graphene. Moreover, the obtained resonances can be effectively tuned in practice due to the continuity of the graphene layers in the hole array metamaterial. These features make the graphene-hBN metamaterial a skeptical design for practical purposes and mid-infrared multi-functional operations such as sensing.

Off-resonance and in-resonance metamaterial design for a high-transmission terahertz-wave quarter-wave plate

This Letter describes a novel metamaterial design by employing off-resonance and in-resonance excitation for a high-transmission terahertz-wave quarter-wave plate (QWP). The device is demonstrated with a thin film metamaterial with double-layer split ring resonators (SRRs). Different from a usual resonant metamaterial device, here we design the work frequency off from the inductor-capacitor (LC) resonance for the TE mode, while in a dipole resonance for the TM mode to obtain the artificial birefringence. Rectangular SRRs in this Letter provide a choice to optimize the off-resonance and in-resonance excitation, to assist the double-layer design for high transmission. Converting a linearly polarized wave to circular polarization with our QWP, the experiment confirms a transmittance of 0.8 and an ellipticity of 0.99 at 0.98 THz. The developed thin film device is flexible and has a thickness of 48 μm (sub-wavelength). This is an advantage for potential integration in systems where overall device compactness is required.

Microwave Metamaterial Absorber for Non-Destructive Sensing Applications of Grain

In this work, we propose a metamaterial absorber at microwave frequencies with significant sensitivity and non-destructive sensing capability for grain samples. This absorber is composed of cross-resonators periodically arranged on an ultrathin substrate, a sensing layer filled with grain samples, and a metal ground. The cross-resonator array is fabricated using the printed circuit board process on an FR-4 board. The performance of the proposed metamaterial is demonstrated with both full-wave simulation and measurement results, and the working mechanism is revealed through multi-reflection interference theory. It can serve as a non-contact sensor for food quality control such as adulteration, variety, etc. by detecting shifts in the resonant frequencies. As a direct application, it is shown that the resonant frequency displays a significant blue shift from 7.11 GHz to 7.52 GHz when the mass fraction of stale rice in the mixture of fresh and stale rice is changed from 0% to 100%. In addition, the absorber shows a distinct difference in the resonant absorption frequency for different varieties of grain, which also makes it a candidate for a grain classification sensor. The presented scheme could open up opportunities for microwave metamaterial absorbers to be applied as efficient sensors in the non-destructive evaluation of agricultural and food product quality.

Tailoring polarization and magnetization of absorbing terahertz metamaterials using a cut-wire sandwich structure

The permittivity and permeability of a cut-wire sandwich structure can be controlled by laterally shifting the upper and lower layers. The use of this process for designing specific application-oriented devices may lack clear-cut guidelines because the lateral misalignment will significantly change the permittivity and permeability simultaneously. Therefore, in this work, we designed, fabricated and characterized a cut-wire sandwich device capable of tailoring the polarization and magnetization separately, thereby providing a promising recipe for achieving specific application objectives, such as a high-performance absorber. Accumulated charges effectively provided the polarization at the edge of cut-wires, and the surface current density on the cut-wires at top and bottom layers effectively generated the magnetization. By controlling and optimizing the geometrical configurations of the entire sandwich device (without lateral misalignment), the impedance could be matched to that of free space while generating a large imaginary part in the refractive index. This work characterizes the absorption performance of such sandwich structures in the terahertz regime. This mechanism could be further extended to other metamaterial devices in the terahertz and other frequency ranges because polarization and magnetization can now be selectively controlled in a straightforward manner.

Polarization-insensitive, ultra-broadband, and compact metamaterial-inspired optical absorber via wide-angle and highly efficient performances

Because of exhibiting extraordinary features, metamaterial absorbers have captured considerable attention in recent years, especially at visible frequencies. In this paper, a new design of a metamaterial-inspired perfect visible absorber (MIPVA) is investigated, which exhibits ultra-broadband, polarization-independent, and wide-angle performances. The proposed MIPVA provides a flat and near unity absorbance (>99%) in an ultra-broad range of radiation wavelengths from λ=500 to 625 nm, while retaining its convincing absorptivity over the entire visible wavelengths. A comprehensive parametric study is accomplished to demonstrate the effects of structural parameters on the absorptivity of the designed MIPVA. To clarify the physical mechanism of absorption, the electric field and surface current distributions of MIPVA are also monitored and elaborately discussed throughout the paper. The results show that the proposed MIPVA exhibits a polarization-insensitive absorption behavior in a wide range of incident wave angles. The interference theory is also utilized to verify the results. In addition, our MIPVA has a compact and low-profile design, while its ability to absorb solar radiation is significantly improved with respect to preceding studies in terms of both the frequency bandwidth and absorptivity; thereby, it is a worthy candidate to play an essential role in different visible-range applications.

Design of Quad-Band Terahertz Metamaterial Absorber Using a Perforated Rectangular Resonator for Sensing Applications

Quad-band terahertz absorber with single-sized metamaterial design formed by a perforated rectangular resonator on a gold substrate with a dielectric gap in between is investigated. The designed metamaterial structure enables four absorption peaks, of which the first three peaks have large absorption coefficient while the last peak possesses a high Q (quality factor) value of 98.33. The underlying physical mechanisms of these peaks are explored; it is found that their near-field distributions are different. Moreover, the figure of merit (FOM) of the last absorption peak can reach 101.67, which is much higher than that of the first three absorption modes and even absorption bands of other works operated in the terahertz frequency. The designed device with multiple-band absorption and high FOM could provide numerous potential applications in terahertz technology-related fields.

Hybrid Metamaterial Absorber Platform for Sensing of CO2 Gas at Mid-IR

Application of two major classes of CO2 gas sensors, i.e., electrochemical and nondispersive infrared is predominantly impeded by the poor selectivity and large optical interaction length, respectively. Here, a novel "hybrid metamaterial" absorber platform is presented by integrating the state-of-the-art complementary metal-oxide-semiconductor compatible metamaterial with a smart, gas-selective-trapping polymer for highly selective and miniaturized optical sensing of CO2 gas in the 5-8 µm mid-IR spectral window. The sensor offers a minimum of 40 ppm detection limit at ambient temperature on a small footprint (20 µm by 20 µm), fast response time (≈2 min), and low hysteresis. As a proof-of-concept, net absorption enhancement of 0.0282%/ppm and wavelength shift of 0.5319 nm ppm-1 are reported. Furthermore, the gas- selective smart polymer is found to enable dual-mode multiplexed sensing for crosschecking and validation of gas concentration on a single platform. Additionally, unique sensing characteristics as determined by the operating wavelength and bandwidth are demonstrated. Also, large differential response of the metamaterial absorber platform for all-optical monitoring is explored. The results will pave the way for a physical understanding of metamaterial-based sensing when integrated with the mid-IR detector for readout and extending the mid-IR functionalities of selective polymers for the detection of technologically relevant gases.

CMOS compatible metamaterial absorbers for hyperspectral medium wave infrared imaging and sensing applications

We experimentally demonstrate a CMOS compatible medium wave infrared metal-insulator-metal (MIM) metamaterial absorber structure where for a single dielectric spacer thickness at least 93% absorption is attained for 10 separate bands centred at 3.08, 3.30, 3.53, 3.78, 4.14, 4.40, 4.72, 4.94, 5.33, 5.60 μm. Previous hyperspectral MIM metamaterial absorber designs required that the thickness of the dielectric spacer layer be adjusted in order to attain selective unity absorption across the band of interest thereby increasing complexity and cost. We show that the absorption characteristics of the hyperspectral metamaterial structures are polarization insensitive and invariant for oblique incident angles up to 25° making them suitable for practical implementation in an imaging system. Finally, we also reveal that under TM illumination and at certain oblique incident angles there is an extremely narrowband Fano resonance (Q > 50) between the MIM absorber mode and the surface plasmon polariton mode that could have applications in hazardous/toxic gas identification and biosensing.

Broadband microwave absorption utilizing water-based metamaterial structures

In this paper, broadband microwave absorbers utilizing water-based metamaterial structure elements have been proposed and investigated. We employ water into the metamaterial structure unit-cell of the absorber as primary resonant elements such as the water-droplet, or water-tube structure. By investigating the resonant modes and the coupling between the water elements and the surrounding dielectrics, it is found the inherent multi-resonance of the proposed metamaterial structures could result in a broadband microwave absorption. For water-droplets design, 90% microwave absorption has been achieved from 7.5 GHz to 15 GHz, while for water-tube design, a much broader bandwidth from 5 GHz to 15 GHz is obtained for nearly 90% microwave absorption. The broadband absorption performance has been verified by both full wave simulation and experimental measurement. We believe the proposed broadband water-based absorber may find some applications in microwave stealth and electromagnetic compatibility technology.

Design of a Broadband Tunable Terahertz Metamaterial Absorber Based on Complementary Structural Graphene

We present a simple design for a broadband tunable terahertz (THz) metamaterial absorber (MMA) consisting of a complementary cross-oval-shaped graphene (CCOSG) structure and dielectric substrate placed on a continuous metal film. Both numerical simulation and theoretical calculation results indicate that the absorbance is greater than 80% from 1.2 to 1.8 THz, and the corresponding relative bandwidth is up to 40%. Simulated electric field and power loss density distributions reveal that the broadband absorption mainly originates from the excitation of continuous surface plasmon resonance (SPR) on the CCOSG. In addition, the MMA is polarization-insensitive for both transverse-electric (TE) and transverse-magnetic (TM) modes due to the geometry rotational symmetry of the unit-cell structure. Furthermore, the broadband absorption properties of the designed MMA can be effectively tunable by varying the geometric parameters of the unit-cell and chemical potential of graphene. Our results may find promising applications in sensing, detecting, and optoelectronic-related devices.

Analysis of the thickness dependence of metamaterial absorbers at terahertz frequencies

Metamaterial absorbers typically consist of a metamaterial layer, a dielectric spacer layer, and a metallic ground plane. We have investigated the dependence of the metamaterial absorption maxima on the spacer layer thickness and the reflection coefficient of the metamaterial layer obtained in the absence of the ground plane layer. Specifically, we employ interference theory to obtain an analytical expression for the spacer thickness needed to maximize the absorption at a given frequency. The efficacy of this simple expression is experimentally verified at terahertz frequencies through detailed measurements of the absorption spectra of a series of metamaterials structures with different spacer thicknesses. Using an array of split-ring resonators (SRRs) as the metamaterial layer and SU8 as the spacer material we observe that the absorption peaks redshift as the spacer thickness is increased, in excellent agreement with our analysis. Our findings can be applied to guide metamaterial absorber designs and understand the absorption peak frequency shift of sensors based on metamaterial absorbers.

Metasurfaced Reverberation Chamber

The concept of metasurfaced reverberation chamber (RC) is introduced in this paper. It is shown that by coating the chamber wall with a rotating 1-bit random coding metasurface, it is possible to enlarge the test zone of the RC while maintaining the field uniformity as good as that in a traditional RC with mechanical stirrers. A 1-bit random coding diffusion metasurface is designed to obtain all-direction backscattering under normal incidence. Three specific cases are studied for comparisons, including a (traditional) mechanical stirrer RC, a mechanical stirrer RC with a fixed diffusion metasurface, and a RC with a rotating diffusion metasurface. Simulation results show that the compact rotating diffusion metasurface can act as a stirrer with good stirring efficiency. By using such rotating diffusion metasurface, the test region of the RC can be greatly extended.

Polarization-insensitive and wide-incident-angle optical absorber with periodically patterned graphene-dielectric arrays

A polarization-insensitive and angle-independent graphene absorber (GA) with periodically patterned grating is demonstrated. A periodic nanocavity composed of multilayer subwavelength grating and metal substrate supports a strongly localized mode inside the cavity, where the mode helps to absorb more electromagnetic waves. The proposed GA exhibits polarization-insensitive behavior and maintains the high absorption above 90% within a wide range of incident angle (more than 80°). We attribute the high absorption to the excitation of the cavity mode resonance and magnetic resonance for the transverse electric and transverse magnetic polarizations, respectively. The proposed GA has potential applications in the design of various devices, such as optical modulators or tunable absorption filters because of its remarkable angle-insensitive absorption performance.

Hybrid graphene metasurfaces for high-speed mid-infrared light modulation and single-pixel imaging

During the past decades, major advances have been made in both the generation and detection of infrared light; however, its efficient wavefront manipulation and information processing still encounter great challenges. Efficient and fast optoelectronic modulators and spatial light modulators are required for mid-infrared imaging, sensing, security screening, communication and navigation, to name a few. However, their development remains elusive, and prevailing methods reported so far have suffered from drawbacks that significantly limit their practical applications. In this study, by leveraging graphene and metasurfaces, we demonstrate a high-performance free-space mid-infrared modulator operating at gigahertz speeds, low gate voltage and room temperature. We further pixelate the hybrid graphene metasurface to form a prototype spatial light modulator for high frame rate single-pixel imaging, suggesting orders of magnitude improvement over conventional liquid crystal or micromirror-based spatial light modulators. This work opens up the possibility of exploring wavefront engineering for infrared technologies for which fast temporal and spatial modulations are indispensable.

Engineering the Complex-Valued Constitutive Parameters of Metamaterials for Perfect Absorption

We theoretically studied how to directly engineer the constitutive parameters of metamaterials for perfect absorbers of electromagnetic waves. As an example, we numerically investigated the necessary refractive index n and extinction coefficient k and the relative permittivity ε and permeability μ of a metamaterial anti-reflection layer, which could cancel the reflection from a hydrogenated amorphous silicon (α-Si:H) thin film on a metal substrate, within the visible wavelength range from 300 to 800 nm. We found that the metamaterial anti-reflection layer should have a negative refractive index (n < 0) for short-wavelength visible light but have a positive refractive index (n > 0) for long-wavelength visible light. The relative permittivity ε and permeability μ could be fitted by the Lorentz model, which exhibited electric and magnetic resonances, respectively.

Theoretical investigation of a five-band terahertz absorber based on an asymmetric split-ring resonator

A simple five-band terahertz metamaterial perfect absorber, composed of an asymmetric double-gap square split ring and a metallic ground plate spaced by a thin polyimide dielectric layer, is proposed and theoretically investigated. The results show that it can perform absorption peaks at five resonant frequencies whose peaks average 98.85%. The perfect absorption is mainly attributed to the combined effect of LC, dipole, and surface response of the structure. Compared to previously reported multiband absorbers, our design only has a single and compact structure, which can drastically simplify the design and fabrication process. Furthermore, the resonance absorption properties of the absorber can be tuned by changing the geometric parameters of the structure. Such a simple and effective design holds great promise for potential applications in spectroscopic imaging, biological sensing, and detecting of drugs and explosives.

Section 1Tunable broadband terahertz absorbers based on multiple layers of graphene ribbons

A novel metamaterial structure consisting of multiple graphene/dielectric layers and metallic substrate is proposed to achieve the broadband absorption response at terahertz (THz) frequencies. Utilizing the phase modulation effect generated by graphene ribbons, the bright-dark field is formed to suppress the reflection based on interference theory in a wide period. By irregularly stacking four graphene ribbons of varying widths on four dielectric layers with unequal thickness in a period, we merge successive absorption peaks into a broadband absorption spectrum successfully. The absorption decreases with fluctuations as the incident angle increases. The position of the absorption spectrum can be dynamically tuned by a small change in the Fermi level of graphene instead of re-optimizing and re-fabricating the device. In addition, the bandwidth of the absorber can be further improved by means of increasing the graphene/dielectric layers. The structure proposed in this paper has potential applications in tunable terahertz photonic devices such as dynamic broadband filters, modulators and sensors.

Resonance coupling and polarization conversion in terahertz metasurfaces with twisted split-ring resonator pairs

We investigate edge-coupling of twisted split-ring resonator (SRR) pairs in the terahertz (THz) frequency range. Using a simple coupled-resonator model we show that such a system exhibits resonance splitting and cross-polarization conversion. Numerical simulations and experimental measurements agree well with theoretical calculations, verifying the resonance splitting as a function of the coupling strength given by the SRR separation. We further show that a metal ground plane can be integrated to significantly enhance the resonance coupling, which enables the effective control of resonance splitting and the efficiency and bandwidth of the cross-polarization conversion. Our findings improve the fundamental understanding of metamaterials with a view of accomplishing metamaterial functionalities with enhanced performance, which is of great interest in realizing THz functional devices required in a variety of applications.

Graphene-assisted high-efficiency liquid crystal tunable terahertz metamaterial absorber

In this paper, few-layer porous graphene is integrated onto the surface of a metasurface layer to provide a uniform static electric field to efficiently control liquid crystal, thereby enabling flexible metamaterial designs. We demonstrate a tunable cross-shaped metamaterial absorber with different arm lengths driven by this combined metasurface and graphene electrode. The resulting absorber supports a resonant frequency tunable from 0.75 to 1 THz with a high-quality factor, and amplitude modulation of ~80% at these frequencies with an applied voltage of 10 V. Furthermore, the near-field intensity and hot spot distribution can be manipulated over a broad range.

Mechanisms and applications of terahertz metamaterial sensing: a review

Terahertz (THz) technology has attracted great worldwide interest and novel high-intensity THz sources and plasmonics are two of the most active fields of recent research. Being situated between infrared light and microwave radiation, the absorption of THz rays in molecular and biomolecular systems is dominated by the excitation of intramolecular and intermolecular vibrations. This indicates that THz technology is an effective tool for sensing applications. However, the low sensitivity of free-space THz detection limits the sensing applications, which gives a great opportunity to metamaterials. Metamaterials are periodic artificial electromagnetic media structured with a size scale smaller than the wavelength of external stimuli. They present localized electric field enhancement and large values of quality factor (Q factor) and show high sensitivity to minor environment changes. In the present work, the mechanism of THz metamaterial sensing and dry sample and microfluidic sensing applications based on metamaterials are introduced. Moreover, new directions of THz metamaterial sensing advancement and introduction of two-dimensional materials and nanoparticles for future THz applications are summarized and discussed.

Metamaterial Perfect Absorber Analyzed by a Meta-cavity Model Consisting of Multilayer Metasurfaces

We demonstrate that the metamaterial perfect absorber behaves as a meta-cavity bounded between a resonant metasurface and a metallic thin-film reflector. The perfect absorption is achieved by the Fabry-Perot cavity resonance via multiple reflections between the “quasi-open” boundary of resonator and the “close” boundary of reflector. The characteristic features including angle independence, ultra-thin thickness and strong field localization can be well explained by this meta-cavity model. With this model, metamaterial perfect absorber can be redefined as a meta-cavity exhibiting high Q-factor, strong field enhancement and extremely high photonic density of states, thereby promising novel applications for high performance sensor, infrared photodetector and cavity quantum electrodynamics devices.

Ultrathin tunable terahertz absorber based on MEMS-driven metamaterial

The realization of high-performance tunable absorbers for terahertz frequencies is crucial for advancing applications such as single-pixel imaging and spectroscopy. Based on the strong position sensitivity of metamaterials' electromagnetic response, we combine meta-atoms that support strongly localized modes with suspended flat membranes that can be driven electrostatically. This design maximizes the tunability range for small mechanical displacements of the membranes. We employ a micro-electro-mechanical system technology and successfully fabricate the devices. Our prototype devices are among the best-performing tunable THz absorbers demonstrated to date, with an ultrathin device thickness (~1/50 of the working wavelength), absorption varying between 60% and 80% in the initial state when the membranes remain suspended, and fast switching speed (~27 μs). The absorption is tuned by an applied voltage, with the most marked results achieved when the structure reaches the snap-down state. In this case, the resonance shifts by >200% of the linewidth (14% of the initial resonance frequency), and the absolute absorption modulation measured at the initial resonance can reach 65%. The demonstrated approach can be further optimized and extended to benefit numerous applications in THz technology.

Tunable graphene-based plasmonic multispectral and narrowband perfect metamaterial absorbers at the mid-infrared region

We numerically investigate the optical performance of a periodically patterned H-shaped graphene array by the finite-difference time-domain (FDTD) in the mid-infrared region. The simulated results reveal that absorption spectra of the proposed structure consist of two dramatic narrowband perfect absorption peaks located at 6.3 μm (Mode 1) and 8.6 μm (Mode 2) with high absorption coefficients of 99.65% and 99.80%, respectively. Two impressive absorption bandwidths that are the full width at half-maximum (FWHM) of the resonant frequency of 90 nm and 188 nm are obtained. The dipole resonance mode is supported by graphene ribbon at a wavelength of 6.3 μm. While the other absorption, attributed to the hybridized mode, is a new resonance that is different from the dipole resonance. The spectral position of the absorption peaks can be dynamically tuned by controlling the refractive index of the dielectric and the Fermi energy of graphene. Furthermore, we can obtain multispectral absorption peaks by applying multilayer graphene arrays. These design approaches enable us to control the number of absorption spectra and such absorbers will benefit the easy-to-fabricate nanophotonic devices for optical filtering, thermal detectors, and electromagnetic wave energy storage.