Probing the viscoelastic behavior of cultured airway smooth muscle cells with atomic force microscopy: stiffening induced by contractile agonist

Fast fluorescence laser tracking microrheometry, II: quantitative studies of cytoskeletal mechanotransduction

Fluorescence laser tracking microrheometry (FLTM) is what we believe to be a novel method able to assess the local, frequency-dependent mechanical properties of living cells with nanometer spatial sensitivity at speeds up to 50 kHz. In an earlier article, we described the design, development, and optimization phases of the FLTM before reporting its performances in a variety of viscoelastic materials. In the work presented here, we demonstrate the suitability of FLTM to study local cellular rheology and obtain values for the storage and loss moduli G'(omega) and G''(omega) of fibroblasts consistent with past literature. We further establish that chemically induced cytoskeletal disruption is accompanied by reduced cellular stiffness and viscosity. Next, we provide a systematic study of some experimental variables that may critically influence microrheology measurements. First, we interrogate and justify the relevance of bead endocytosis as a method of cellular internalization of 1-microm probes in FLTM. Second, we show that as sample temperature increases, FLTM findings are elevated toward higher frequencies. Third, we confirm that relevant bead sizes (1 and 2 microm) have no effect on FLTM measurements. Fourth, we report the lack of influence of bead coatings (antiintegrin, antitransferrin, antidystroglycan, or uncoated tracers were surveyed) on their rheological readouts. Finally, we demonstrate the potential of FLTM in studying how substratum rigidity regulates cellular rheological properties. Interestingly, multiple, coupled strain relaxation mechanisms can be observed separated by two plateau moduli. Although these observations can be partly explained by rheological theories describing entangled actin filaments, there is a clear need to extend existing microrheology models to the cytoskeleton, including potentially important factors such as network geometry and remodeling.

Interactions of airway smooth muscle cells with their tissue matrix: implications for contraction

The ability of airway smooth muscle to alter its stiffness and contractility in response to mechanical oscillation and stretch is critically important for the regulation of normal airway responsiveness during breathing. The properties of mechanical adaptation in airway smooth muscle are proposed to result from dynamic cytoskeletal processes outside of the actomyosin interaction. The actomyosin interaction and crossbridge cycling are viewed as components of a complex and integrated array of cytoskeletal events that occur during cell contraction. These events are orchestrated by macromolecular protein complexes that associate with the cytoplasmic domains of integrin proteins at the adhesion junctions between muscle cells and the extracellular matrix. According to this paradigm, these concerted cytoskeletal events are essential components of the process of active tension generation in airway smooth muscle, and also serve to adapt the shape and stiffness of the smooth muscle cell to its environment. Contractile stimuli initiate actin polymerization within the submembranous cortex of the airway smooth muscle cell that may serve to determine the cells shape and strengthen the membrane. The recruitment of structural proteins such as alpha-actinin to adhesion junctions fortifies the strength of the connections between membrane adhesion junctions and actin filaments. These processes create a strong and rigid cytoskeletal framework for the transmission of force generated by the interaction of myosin and actin filaments. This model for the regulation of airway smooth muscle function can provide novel perspectives to explain the normal physiologic behavior of the airways and pathophysiologic properties of the airways in asthma.

Cytoskeletal mechanics in airway smooth muscle cells

Mechanical properties and contractility of airway smooth muscle tissue are largely responsible for airway narrowing and airway hyperresponsiveness in asthma. To explain these pathological phenomena, investigators have studied the mechanical behaviour of airway smooth muscle cells and its relationship to the underlying cellular biophysical and biochemical mechanisms. During the past decade, a growing body of evidence has indicated that a deformable intracellular polymer network, known as the cytoskeleton, plays a major role in transmitting and distributing mechanical forces within the cell and in their conversion into biochemical responses. We review here evidence suggesting that the tensed and crosslinked cytoskeletal lattice, the contractile apparatus, and the cytoskeleton-extracellular matrix interactions are key determinants of mechanical properties and mechanosensing of airway smooth muscle cells, with the mechanical distending stress of the cytoskeleton playing the central role.

Time-dependent changes in smooth muscle cell stiffness and focal adhesion area in response to cyclic equibiaxial stretch

Observations from diverse studies on cell biomechanics and mechanobiology reveal that altered mechanical stimuli can induce significant changes in cytoskeletal organization, focal adhesion complexes, and overall mechanical properties. To investigate effects of short-term equibiaxial stretching on the transverse stiffness of and remodeling of focal adhesions in vascular smooth muscle cells, we developed a cell-stretching device that can be combined with both atomic force and confocal microscopy. Results demonstrate that cyclic 10%, but not 5%, equibiaxial stretching at 0.25 Hz significantly and rapidly alters both cell stiffness and focal adhesion associated paxillin and vinculin. Moreover, measured changes in stiffness and focal adhesion area from baseline values tend to correlate well over the durations of stretching studied. It is suggested that remodeling of focal adhesions plays a critical role in regulating cell stiffness by recruiting and anchoring actin filaments, and that cells rapidly remodel in an attempt to maintain a homeostatic biomechanical state when perturbed above a threshold value.

Cell stiffening in response to external stress is correlated to actin recruitment

We designed a micromanipulation device that allows the local application of a constant force on living cells, and the measurement of their stiffness. The force is applied through an Arg-Gly-Asp-coated bead adhering on the cell and trapped in optical tweezers controlled by a feedback loop. Epifluorescence observations of green fluorescent protein-actin in the cells are made during force application. We observe a stiffening of cells submitted to a constant force within a few minutes, coupled to actin recruitment both at the bead-cell contact and up to several micrometers from the stress application zone. Moreover, kinetics of stiffening and actin recruitment exhibit a strong correlation. This work presents the first quantification of the dynamics of cell mechanical reinforcement under stress, which is a novel insight into the elucidation of the more general phenomenon of cell adaptation to stress.

Biophysical basis for airway hyperresponsiveness

Airway hyperresponsiveness is the excessive narrowing of the airway lumen caused by stimuli that would cause little or no narrowing in the normal individual. It is one of the cardinal features of asthma, but its mechanisms remain unexplained. In asthma, the key end-effector of acute airway narrowing is contraction of the airway smooth muscle cell that is driven by myosin motors exerting their mechanical effects within an integrated cytoskeletal scaffolding. In just the past few years, however, our understanding of the rules that govern muscle biophysics has dramatically changed, as has their classical relationship to airway mechanics. It has become well established, for example, that muscle length is equilibrated dynamically rather than statically, and that in a dynamic setting nonclassical features of muscle biophysics come to the forefront, including unanticipated interactions between the muscle and its time-varying load, as well as the ability of the muscle cell to adapt (remodel) its internal microstructure rapidly in response to its ever-changing mechanical environment. Here, we consider some of these emerging concepts and, in particular, focus on structural remodeling of the airway smooth muscle cell as it relates to excessive airway narrowing in asthma.

Fast fluorescence laser tracking microrheometry. I: instrument development

To gain insight into cellular mechanotransduction pathways, we have developed a fluorescence laser tracking microrheometer (FLTM) to measure material rheological features on micrometer length scales using fluorescent microspheres as tracer particles. The statistical analysis of the Brownian motion of a particle quantifies the viscoelastic properties of the probe's environment, parameterized by the frequency-dependent complex shear modulus G*(omega). This FLTM has nanometer spatial resolution over a frequency range extending from 1 Hz to 50 kHz. In this work, we first describe the consecutive stages of instrument design, development, and optimization. We subsequently demonstrate the accuracy of the FLTM by reproducing satisfactorily the known rheological characteristics of purely viscous glycerol solutions and cross-linked polyacrylamide polymer networks. An upcoming companion article will illustrate the use of FLTM in studying the solid-like versus liquid-like rheological properties of fibroblast cytoskeletons in living biological samples.

Vascular adaptation and mechanical homeostasis at tissue, cellular, and sub-cellular levels

Blood vessels exhibit a remarkable ability to adapt throughout life that depends upon genetic programming and well-orchestrated biochemical processes. Findings over the past four decades demonstrate, however, that the mechanical environment experienced by these vessels similarly plays a critical role in governing their adaptive responses. This article briefly reviews, as illustrative examples, six cases of tissue level growth and remodeling, and then reviews general observations at cell-matrix, cellular, and sub-cellular levels, which collectively point to the existence of a "mechanical homeostasis" across multiple length and time scales that is mediated primarily by endothelial cells, vascular smooth muscle cells, and fibroblasts. In particular, responses to altered blood flow, blood pressure, and axial extension, disease processes such as cerebral aneurysms and vasospasm, and diverse experimental manipulations and clinical treatments suggest that arteries seek to maintain constant a preferred (homeostatic) mechanical state. Experiments on isolated microvessels, cell-seeded collagen gels, and adherent cells isolated in culture suggest that vascular cells and sub-cellular structures such as stress fibers and focal adhesions likewise seek to maintain constant a preferred mechanical state. Although much is known about mechanical homeostasis in the vasculature, there remains a pressing need for more quantitative data that will enable the formulation of an integrative mathematical theory that describes and eventually predicts vascular adaptations in response to diverse stimuli. Such a theory promises to deepen our understanding of vascular biology as well as to enable the design of improved clinical interventions and implantable medical devices.

Cell mechanics: integrating cell responses to mechanical stimuli

Forces are increasingly recognized as major regulators of cell structure and function, and the mechanical properties of cells are essential to the mechanisms by which cells sense forces, transmit them to the cell interior or to other cells, and transduce them into chemical signals that impact a spectrum of cellular responses. Comparison of the mechanical properties of intact cells with those of the purified cytoskeletal biopolymers that are thought to dominate their elasticity reveal the extent to which the studies of purified systems can account for the mechanical properties of the much more heterogeneous and complex cell. This review summarizes selected aspects of current work on cell mechanics with an emphasis on the structures that are activated in cell-cell contacts, that regulate ion flow across the plasma membrane, and that may sense fluid flow that produces low levels of shear stress.

Viscoelasticity of the human red blood cell

We report here the first measurements of the complex modulus of the isolated red blood cell (RBC). Because the RBC is often larger than capillary diameter, important determinants of microcirculatory function are RBC deformability and its changes with pathologies, such as sickle cell disease and malaria. A functionalized ferrimagnetic microbead was attached to the membrane of healthy RBC and then subjected to an oscillatory magnetic field. The resulting torque caused cell deformation. From the oscillatory forcing and resulting bead motions, which were tracked optically, we computed elastic and frictional moduli, g′ and g‴, respectively, from 0.1 to 100 Hz. The g′ was nearly frequency independent and dominated the response at all but the highest frequencies measured. Over three frequency decades, g‴ increased as a power law with an exponent of 0.64, a result not predicted by any simple model. These data suggest that RBC relaxation times that have been reported previously, and any models that rest upon them, are artifactual; the artifact, we suggest, arises from forcing to an exponential fit data of limited temporal duration. A linear range of response was observed, but, as forcing amplitude increased, nonlinearities became clearly apparent. A finite element model suggests that membrane bending was localized to the vicinity of the bead and dominated membrane shear. While the mechanisms accounting for these RBC dynamics remain unclear, methods described here establish new avenues for the exploration of connections among the mechanical, chemical, and biological characteristics of the RBC in health and disease.

Distinct contributions of microtubule subtypes to cell membrane shape and stability

Microtubules (MTs) are linked to cell mechanobiology. "Stable" and "dynamically unstable" microtubule (MT) subtypes are differentially sensitive to growth and distribution in serum starved (SS) versus full serum (FS) conditions. Atomic Force and Immunofluorescence microscopies were used to study the nanomechanical properties of the cell membrane in response to serum conditions and nocodazole. Nanomechanical properties of the cell membrane remain unchanged under SS/FS conditions even though there are drastic MT changes. The cell membrane is shown to depend on unstable MTs and the intermediate filament (IF) networks to maintain local stiffness. Measurements of local membrane nanomechanics in response to nocodazole display characteristic serum dependent decays. The responses suggest that the cell exists in a mechanical transition state. Stiffness is shown to depend on the interplay between dynamically unstable MTs, stable MTs and IFs which all act to impart a distinct cellular type of transient "metastability".

Cellular chemomechanics at interfaces: sensing, integration and response

Living cells are complex entities whose remarkable, emergent capacity to sense, integrate, and respond to environmental cues relies on an intricate series of interactions among the cell's macromolecular components. Defects in mechanosensing, transduction,or responses underlie many diseases such as cancers, immune disorders, cardiac hypertrophy, genetic malformations, and neuropathies. Here, we highlight micro- and nanotechnology-based tools that have been used to study how chemical and mechanical cues modulate the responses of single cells in contact with the extracellular environment. Understanding the physical aspects of these complex processes at the micro- and nanometer scale could produce profound and fundamental new insights into how the processes of cell migration, metastasis, immune function and other areas which are regulated by mechanical forces.

Soft biological materials and their impact on cell function

Most organs and biological tissues are soft viscoelastic materials with elastic moduli ranging from on the order of 100 Pa for the brain to 100 000 Pa for soft cartilage. Biocompatible synthetic materials already have many applications, but combining chemical compatibility with physiologically appropriate mechanical properties will increase their potential for use both as implants and as substrates for tissue engineering. Understanding and controlling mechanical properties, specifically softness, is important for appropriate physiological function in numerous contexts. The mechanical properties of the substrate on which, or within which, cells are placed can have as large an impact as chemical stimuli on cell morphology, differentiation, motility, and commitment to live or die.

Cell dynamic adhesion and elastic properties probed with cylindrical atomic force microscopy cantilever tips

Cell adhesion is required for essential biological functions such as migration, tissue formation and wound healing, and it is mediated by individual molecules that bind specifically to ligands on other cells or on the extracellular matrix. Atomic force microscopy (AFM) has been successfully used to measure cell adhesion at both single molecule and whole cell levels. However, the measurement of inherent cell adhesion properties requires a constant cell-probe contact area during indentation, a requirement which is not fulfilled in common pyramidal or spherical AFM tips. We developed a procedure using focused ion beam (FIB) technology by which we modified silicon pyramidal AFM cantilever tips to obtain flat-ended cylindrical tips with a constant and known area of contact. The tips were validated on elastic gels and living cells. Cylindrical tips showed a fairly linear force-indentation behaviour on both gels and cells for indentations >200 nm. Cylindrical tips coated with ligands were used to quantify inherent dynamic cell adhesion and elastic properties. Force, work of adhesion and elasticity showed a marked dynamic response. In contrast, the deformation applied to the cells before rupture was fairly constant within the probed dynamic range. Taken together, these results suggest that the dynamic adhesion strength is counterbalanced by the dynamic elastic response to keep a constant cell deformation regardless of the applied pulling rate.

A theoretical model for F-actin remodeling in vascular smooth muscle cells subjected to cyclic stretch

A constrained mixture theory model was developed and used to estimate remodeling of F-actin in vascular smooth muscle cells that were subjected to 10% equibiaxial stretching for up to 30min. The model was based on a synthesis of data on time-dependent changes in atomic force microscopy measured cell stiffness and immunofluorescence measured focal adhesion associated vinculin as well as data on stress fiber stiffness and pre-stretch. Results suggest that an observed acute (after 2min of stretching) increase in cell stiffness is consistent with an increased stretch of the originally present F-actin plus an assembly of new F-actin having nearly homeostatic values of stretch. Moreover, the subsequent (after 30min of stretching) decrease in cell stiffness back towards the baseline value is consistent with a replacement of the overstretched original filaments with the new (reassembled), less stretched filaments. That is, overall cell response is consistent with a recently proposed concept of "tensional homeostasis" whereby cells seek to maintain constant certain mechanical factors via a remodeling of intracellular and transmembrane proteins. Although there is a need to refine the model based on more comprehensive data sets, using multiple experimental approaches, the present results suggest that a constrained mixture theory can capture salient features of the dynamics of F-actin remodeling and that it offers some advantages over many past methods of modeling, particularly those based on classical linearized viscoelasticity.

Contributions of the active and passive components of the cytoskeletal prestress to stiffening of airway smooth muscle cells

Airway smooth muscle cells exhibit stiffening during contractile activation. This stiffening may be interpreted as a result of the stabilizing influence of the mechanical prestress stored within the cytoskeleton (CSK). However, in vivo, airway smooth muscle cells contract while simultaneously experiencing breathing-induced stretching. Excessive stretching of cells could cause actin-myosin crosslinks, and possibly other cytoskeletal filaments, to break, thereby leading to dissipation of the prestress and inhibition of further cell stiffening. The aim of this study is to investigate the stiffening behavior of individual human airway smooth muscle (HASM) cells exposed to a combination of substrate stretching, contractile activation and relaxation. We treated cultured HASM cells with either contractile (histamine) or relaxing (DBcAMP) pharmacological agonists and used magnetic cytometry technique to investigate the stiffening behavior of these cells during uniform substrate stretching (0-30%). Cells that were not treated, as well as those treated with histamine, exhibited increasing stiffening during stretching up to 20% of substrate strain, with additional stiffening becoming inhibited for substrate strains of 20-30%. In contrast, in cells treated with DBcAMP, stretching produced moderate but continuous stiffening with increasing substrate strain. These results indicate that both active and passive components of the prestress contribute to cell stiffening. We also observed that cells permeabilized with saponin exhibited stiffening at low levels (<10%) of substrate stretching, similar to non-permeabilized cells, but not at high levels (10-30%) of stretching, where stiffening was inhibited. These data suggest that at low levels of substrate strains the relative contributions of ion channel activation as well as actin and focal adhesion remodeling are less important for stiffening than passive distension of the CSK. Taken together, our results suggest that both the active and passive components of the cytoskeletal prestress contribute to the stiffening behavior of HASM cells under physiological conditions, but that at high levels of cellular distensions there is a possible tradeoff between these two components with the contribution from the passive component becoming increasingly more important.

Load-induced focal adhesion mechanotransduction is altered with aging in the Fischer 344/NNiaHSd x Brown Norway/BiNia rat aorta

The focal adhesion kinase (FAK) pathway has emerged as a critical component for mediating numerous cellular responses including control of cell growth, differentiation, and adaptation. Here we compared the expression, basal activation, and the ability of increased intraluminal pressure to activate FAK and focal adhesion-associated proteins in the aorta of adult (6 months old) and very aged (36 months old) Fischer 344/NNiaHSd x Brown Norway/BiNia (F344/NXBN) rats. Immunoblot analysis showed increases in the aortic content of FAK (15%), FAK related non-kinase (p41-FRNK) (28%), Src (92%), RhoA (41%), and paxillin (23%) in the very aged aortae. Increased age significantly changed the basal phosphorylation status of FAK and paxillin. Application of aortic intraluminal pressure (200 mm Hg) amplified the phosphorylation of FAK (Tyr 925), Src (Tyr 416), and paxillin (Tyr 188) in adult animals while aortic loading in the very aged animals failed to induce FAK (Tyr 925) phosphorylation. Aging did not alter the load-induced regulation of RhoA; however, FRNK (p41) translocation between cytosolic and membrane compartments was increased. These results confirm previous observations that FAK and focal adhesion-associated proteins are mechanically regulated and expand these studies to suggest that FAK mechanotransduction is altered with aging.

Dendritic spine viscoelasticity and soft-glassy nature: balancing dynamic remodeling with structural stability

Neuronal dendritic spines are a key component of brain circuitry, implicated in many mechanisms for plasticity and long-term stability of synaptic communication. They can undergo rapid actin-based activity-dependent shape fluctuations, an intriguing biophysical property that is believed to alter synaptic transmission. Yet, because of their small size (approximately 1 microm or less) and metastable behavior, spines are inaccessible to most physical measurement techniques. Here we employ atomic force microscopy elasticity mapping and novel dynamic indentation methods to probe the biomechanics of dendritic spines in living neurons. We find that spines exhibit 1), a wide range of rigidities, correlated with morphological characteristics, axonal association, and glutamatergic stimulation, 2), a uniquely large viscosity, four to five times that of other cell types, consistent with a high density of solubilized proteins, and 3), weak power-law rheology, described by the soft-glassy model for cellular mechanics. Our findings provide a new perspective on spine functionality and identify key mechanical properties that govern the ability of spines to rapidly remodel and regulate internal protein trafficking but also maintain structural stability.

Dynamics of prestressed semiflexible polymer chains as a model of cell rheology

We report on a model of a prestressed nonlinear semiflexible polymer chain that links thermally driven dynamics to the creep behavior of living cells. Numerical simulations show that the chain's creep follows a power law with an exponent that decreases with increasing prestress. This is related to the propagation of free energy through the chain in response to stretching, where the propagation speed is regulated by the prestress via the chain's nonlinear elasticity. These results indicate that the main aspects of cell rheology are consistent with the dynamics of single polymer chains under tension.

An ultrasound imaging method for in vivo tracheal bulk and Young's moduli of elasticity

Alterations in neonatal airway mechanical properties resulting from ventilatory therapies such as mechanical ventilation have been implicated in airway collapse and chronic disease. Advances in ultrasound (US) technology allow for real-time imaging and accurate measurement of tracheal dimensions in vivo; thus, changes in mechanical properties can be tracked longitudinally. In this report we introduce an adaptation of engineering concepts using US imaging data to study airway mechanics in vivo. In this protocol, tracheal segments are isolated in a spontaneously breathing newborn lamb model and the segments are exposed to time-cycled, pressure-limited mechanical ventilation. Serially, tracheal segments are filled with saline and pressure-volume relationships are recorded with stepwise volume infusions. US dimensional measurements of the segments are made while static (no distending pressure) and at pressure limits during dynamic ventilator cycling. US measurements are used to normalize pressure-volume data for resting volume, calculation of bulk modulus, stress-strain relationships and the adapted Young's modulus associated with tangential wall stress. Temporal changes in bulk and Young's moduli demonstrate the time dependence of alterations in conducting airway mechanical properties in vivo during the course of mechanical ventilation. This methodology will provide a means to evaluate respiratory therapies with respect to airway mechanics.

Nonlinear analysis of oscillatory indentation in elastic and viscoelastic solids

Determining the mechanical properties at micro- and nanometer length scales using nanoindentation or atomic force microscopy is important to many areas of science and engineering. Here we establish equations for obtaining storage and loss modulus from oscillatory indentations by performing a nonlinear analysis of conical and spherical indentation in elastic and viscoelastic solids. We show that, when the conical indenter is driven by a sinusoidal force, the square of displacement is a sinusoidal function of time, not the displacement itself, which is commonly assumed. Similar conclusions hold for spherical indentations. Well-known difficulties associated with measuring contact area and correcting thermal drift may be circumvented using the newly derived equations. These results may help improve methods of using oscillatory indentation for determining elastic and viscoelastic properties of solids.

Sensitivity of alveolar macrophages to substrate mechanical and adhesive properties

In order to understand the sensitivity of alveolar macrophages (AMs) to substrate properties, we have developed a new model of macrophages cultured on substrates of increasing Young's modulus: (i) a monolayer of alveolar epithelial cells representing the supple (approximately 0.1 kPa) physiological substrate, (ii) polyacrylamide gels with two concentrations of bis-acrylamide representing low and high intermediate stiffness (respectively 40 kPa and 160 kPa) and, (iii) a highly rigid surface of plastic or glass (respectively 3 MPa and 70 MPa), the two latter being or not functionalized with type I-collagen. The macrophage response was studied through their shape (characterized by 3D-reconstructions of F-actin structure) and their cytoskeletal stiffness (estimated by transient twisting of magnetic RGD-coated beads and corrected for actual bead immersion). Macrophage shape dramatically changed from rounded to flattened as substrate stiffness increased from soft ((i) and (ii)) to rigid (iii) substrates, indicating a net sensitivity of alveolar macrophages to substrate stiffness but without generating F-actin stress fibers. Macrophage stiffness was also increased by large substrate stiffness increase but this increase was not due to an increase in internal tension assessed by the negligible effect of a F-actin depolymerizing drug (cytochalasine D) on bead twisting. The mechanical sensitivity of AMs could be partly explained by an idealized numerical model describing how low cell height enhances the substrate-stiffness-dependence of the apparent (measured) AM stiffness. Altogether, these results suggest that macrophages are able to probe their physical environment but the mechanosensitive mechanism behind appears quite different from tissue cells, since it occurs at no significant cell-scale prestress, shape changes through minimal actin remodeling and finally an AMs stiffness not affected by the loss in F-actin integrity.

Nanomechanical properties of individual chondrocytes and their developing growth factor-stimulated pericellular matrix

The nanomechanical properties of individual cartilage cells (chondrocytes) and their aggrecan and collagen-rich pericellular matrix (PCM) were measured via atomic force microscope nanoindentation using probe tips of two length scales (nanosized and micron-sized). The properties of cells freshly isolated from cartilage tissue (devoid of PCM) were compared to cells that were cultured for selected times (up to 28 days) in 3-D alginate gels which enabled PCM assembly and accumulation. Cells were immobilized and kept viable in pyramidal wells microfabricated into an array on silicon chips. Hertzian contact mechanics and finite element analyses were employed to estimate apparent moduli from the force versus depth curves. The effects of culture conditions on the resulting PCM properties were studied by comparing 10% fetal bovine serum to medium containing a combination of insulin growth factor-1 (IGF-1)+osteogenic protein-1 (OP-1). While both systems showed increases in stiffness with time in culture between days 7 and 28, the IGF-1+OP-1 combination resulted in a higher stiffness for the cell-PCM composite by day 28 and a higher apparent modulus of the PCM which is compared to the FBS cultured cells. These studies give insight into the temporal evolution of the nanomechanical properties of the pericellar matrix relevant to the biomechanics and mechanobiology of tissue-engineered constructs for cartilage repair.

Viscoelastic and dynamic nonlinear properties of airway smooth muscle tissue: roles of mechanical force and the cytoskeleton

The viscoelastic and dynamic nonlinear properties of guinea pig tracheal smooth muscle tissues were investigated by measuring the storage (G′) and loss (G") moduli using pseudorandom small-amplitude length oscillations between 0.12 and 3.5 Hz superimposed on static strains of either 10 or 20% of initial length. The G" and G′ spectra were interpreted using a linear viscoelastic model incorporating damping (G) and stiffness (H), respectively. Both G and H were elevated following an increase in strain from 10 to 20%. There was no change in harmonic distortion ( Kd), an index of dynamic nonlinearity, between 10 and 20% strains. Application of methacholine at 10% strain significantly increased G and H while it decreased Kd. Cytochalasin D, isoproterenol, and HA-1077, a Rho-kinase inhibitor, significantly decreased both G and H but increased Kd. Following cytochalasin D, G, H, and Kd were all elevated when mean strain increased from 10 to 20%. There were no changes in hysteresivity, G/H, under any condition. We conclude that not all aspects of the viscoelastic properties of tracheal smooth muscle strips are similar to those previously observed in cultured cells. We attribute these differences to the contribution of the extracellular matrix. Additionally, using a network model, we show that the dynamic nonlinear behavior, which has not been observed in cell culture, is associated with the state of the contractile stress and may derive from active polymerization within the cytoskeleton.

Do biophysical properties of the airway smooth muscle in culture predict airway hyperresponsiveness?

Airway hyperresponsiveness is a cardinal feature of asthma but remains largely unexplained. In asthma, the key end-effector of acute airway narrowing is the airway smooth muscle (ASM) cell. Here we report novel biophysical properties of the ASM cell isolated from the relatively hyporesponsive Lewis rat versus the relatively hyperresponsive Fisher rat. We focused upon the ability of the cytoskeleton (CSK) of the ASM cell to stiffen, to generate contractile forces, and to remodel. We used optical magnetic twisting cytometry to measure cell stiffness and traction microscopy to measure contractile forces. To measure remodeling dynamics, we quantified spontaneous nanoscale motions of a microbead tightly anchored to the CSK. In response to a panel of contractile and relaxing agonists, Fisher ASM cells showed greater stiffening, bigger contractile forces, and faster CSK remodeling; they also exhibited higher effective temperature of the CSK matrix. These physical differences measured at the level of the single cell in vitro were consistent with strain-related differences in airway responsiveness in vivo. As such, comprehensive biophysical characterizations of CSK dynamics at the level of the cell in culture may provide novel perspectives on the ASM and its contributions to the excessive airway narrowing in asthma.

Rat airway smooth muscle cell during actin modulation: rheology and glassy dynamics

Although changes of cytoskeleton (CSK) stiffness and friction can be induced by diverse interventions, all mechanical changes reported to date can be scaled onto master relationships that appear to be universal. To assess the limits of the applicability of those master relationships, we focused in the present study on actin and used a panel of actin-manipulating drugs that is much wider than any used previously. We focused on the cultured rat airway smooth muscle (ASM) cell as a model system. Cells were treated with agents that directly modulate the polymerization (jasplakinolide, cytochalasin D, and latrunculin A), branching (genistein), and cross linking (phallacidin and phalloidin oleate) of the actin lattice. Contractile (serotonin, 5-HT) and relaxing (dibutyryl adenosine 3',5'-cyclic monophosphate, DBcAMP) agonists and a myosin inhibitor (ML-7) were also tested for comparison, because these agents may change the structure of actin indirectly. Using optical magnetic twisting cytometry, we measured elastic and frictional moduli before and after treatment with each agent. Stiffness increased with frequency as a weak power law, and changes of friction paralleled those of stiffness until they approached a Newtonian viscous limit. Despite large differences in the mechanism of action among the interventions, all data collapsed onto master curves that depended on a single parameter. In the context of soft glassy systems, that parameter would correspond to an effective temperature of the cytoskeletal matrix and reflect the effects of molecular crowding and associated molecular trapping. These master relationships demonstrate that when the mechanical properties of the cell change, they are constrained to do so along a special trajectory. Because mechanical characteristics of the cell shadow underlying molecular events, these results imply special constraints on the protein-protein interactions that dominate CSK mechanical properties.