Micromechanical architecture of the endothelial cell cortex

Potassium softens vascular endothelium and increases nitric oxide release

In the presence of aldosterone, plasma sodium in the high physiological range stiffens endothelial cells and reduces the release of nitric oxide. We now demonstrate effects of extracellular potassium on stiffness of individual cultured bovine aortic endothelial cells by using the tip of an atomic force microscope as a mechanical nanosensor. An acute increase of potassium in the physiological range swells and softens the endothelial cell and increases the release of nitric oxide. A high physiological sodium concentration, in the presence of aldosterone, prevents these changes. We propose that the potassium effects are caused by submembranous cortical fluidization because cortical actin depolymerization induced by cytochalasin D mimics the effect of high potassium. In contrast, a low dose of trypsin, known to activate sodium influx through epithelial sodium channels, stiffens the submembranous cell cortex. Obviously, the cortical actin cytoskeleton switches from gelation to solation depending on the ambient sodium and potassium concentrations, whereas the center of the cell is not involved. Such a mechanism would control endothelial deformability and nitric oxide release, and thus influence systemic blood pressure.

Wide range scanning probe microscopy for probing mechanical effects on cellular function

Scanning probe microscopy (SPM) provides a range of strategies for studying biological phenomena due to its ability to image surfaces under liquids. However, some cellular events, such as cell migration, exceed the maximum measurable range of SPM. Recently, we have developed a wide range scanning probe microscope (WR-SPM) to investigate cellular events which exceed the range of the conventional SPM. In this review, we introduce the instrumentation of the WR-SPM, which can measure a sample for 400 µm in the xy directions and 23 µm in the z direction. We then show the application of the WR-SPM to studies of the stiffness response of epithelial cells to an external loading force and demonstrat that the stiffness of the epithelial cells increases under stretched conditions. We also showed the results on the mesh structure on the surface of a melanoma cell as well as the regulatory mechanism of the cellular contractile force by the combined use of topographical and mechanical modes of the WR-SPM. These findings indicate that the WR-SPM is very useful for studying the functions of a cell in relation to the surface structure and mechanical properties of that cell.

Endothelial permeability is controlled by spatially defined cytoskeletal mechanics: atomic force microscopy force mapping of pulmonary endothelial monolayer

Actomyosin contraction directly regulates endothelial cell (EC) permeability, but intracellular redistribution of cytoskeletal tension associated with EC permeability is poorly understood. We used atomic force microscopy (AFM), EC permeability assays, and fluorescence microscopy to link barrier regulation, cell remodeling, and cytoskeletal mechanical properties in EC treated with barrier-protective as well as barrier-disruptive agonists. Thrombin, vascular endothelial growth factor, and hydrogen peroxide increased EC permeability, disrupted cell junctions, and induced stress fiber formation. Oxidized 1-palmitoyl-2-arachidonoyl-sn-glycero-3-phosphocholine, hepatocyte growth factor, and iloprost tightened EC barriers, enhanced peripheral actin cytoskeleton and adherens junctions, and abolished thrombin-induced permeability and EC remodeling. AFM force mapping and imaging showed differential distribution of cell stiffness: barrier-disruptive agonists increased stiffness in the central region, and barrier-protective agents decreased stiffness in the center and increased it at the periphery. Attenuation of thrombin-induced permeability correlates well with stiffness changes from the cell center to periphery. These results directly link for the first time the patterns of cell stiffness with specific EC permeability responses.

Imaging of membrane proteins using antenna-based optical microscopy

The localization and identification of individual proteins is of key importance for the understanding of biological processes on the molecular scale. Here, we demonstrate near-field fluorescence imaging of single proteins in their native cell membrane. Incident laser radiation is localized and enhanced with an optical antenna in the form of a spherical gold particle attached to a pointed dielectric tip. Individual proteins can be identified with a diffraction-unlimited spatial resolution of ∼50 nm. Besides determining the concentration and distribution of specific membrane proteins, this approach makes it possible to study the colocalization of different membrane proteins. Moreover, it enables a simultaneous recording of the membrane topology. Protein distributions can be correlated with the local membrane topology, thereby providing important information on the chemical and structural organization of cellular membranes.

Noncontact measurement of the local mechanical properties of living cells using pressure applied via a pipette

Mechanosensitivity in living biological tissue is a study area of increasing importance, but investigative tools are often inadequate. We have developed a noncontact nanoscale method to apply quantified positive and negative force at defined positions to the soft responsive surface of living cells. The method uses applied hydrostatic pressure (0.1-150 kPa) through a pipette, while the pipette-sample separation is kept constant above the cell surface using ion conductance based distance feedback. This prevents any surface contact, or contamination of the pipette, allowing repeated measurements. We show that we can probe the local mechanical properties of living cells using increasing pressure, and hence measure the nanomechanical properties of the cell membrane and the underlying cytoskeleton in a variety of cells (erythrocytes, epithelium, cardiomyocytes and neurons). Because the cell surface can first be imaged without pressure, it is possible to relate the mechanical properties to the local cell topography. This method is well suited to probe the nanomechanical properties and mechanosensitivity of living cells.

Regulation of the micromechanical properties of pulmonary endothelium by S1P and thrombin: role of cortactin

Disruption of pulmonary endothelial cell (EC) barrier function is a critical pathophysiologic event in highly morbid inflammatory conditions such as sepsis and acute respiratory disease stress syndrome. Actin cytoskeleton, an essential regulator of endothelial permeability, is a dynamic structure whose stimuli-induced rearrangement is linked to barrier modulation. Here, we used atomic force microscopy to characterize structural and mechanical changes in the F-actin cytoskeleton of cultured human pulmonary artery EC in response to both barrier-enhancing (induced by sphingosine 1-phosphate (S1P)) and barrier-disrupting (induced by thrombin) conditions. Atomic force microscopy elasticity measurements show differential effects: for the barrier protecting molecule S1P, the elastic modulus was elevated significantly on the periphery; for the barrier-disrupting molecule thrombin, on the other hand, it was elevated significantly in the central region of the cell. The force and elasticity maps correlate with F-actin rearrangements as identified by immunofluorescence analysis. Significantly, reduced expression (via siRNA) of cortactin, an actin-binding protein essential to EC barrier regulation, resulted in a shift in the S1P-mediated elasticity pattern to more closely resemble control, unstimulated endothelium.

Micropatterning of single endothelial cell shape reveals a tight coupling between nuclear volume in G1 and proliferation

Shape-dependent local differentials in cell proliferation are considered to be a major driving mechanism of structuring processes in vivo, such as embryogenesis, wound healing, and angiogenesis. However, the specific biophysical signaling by which changes in cell shape contribute to cell cycle regulation remains poorly understood. Here, we describe our study of the roles of nuclear volume and cytoskeletal mechanics in mediating shape control of proliferation in single endothelial cells. Micropatterned adhesive islands were used to independently control cell spreading and elongation. We show that, irrespective of elongation, nuclear volume and apparent chromatin decondensation of cells in G1 systematically increased with cell spreading and highly correlated with DNA synthesis (percent of cells in the S phase). In contrast, cell elongation dramatically affected the organization of the actin cytoskeleton, markedly reduced both cytoskeletal stiffness (measured dorsally with atomic force microscopy) and contractility (measured ventrally with traction microscopy), and increased mechanical anisotropy, without affecting either DNA synthesis or nuclear volume. Our results reveal that the nuclear volume in G1 is predictive of the proliferative status of single endothelial cells within a population, whereas cell stiffness and contractility are not. These findings show that the effects of cell mechanics in shape control of proliferation are far more complex than a linear or straightforward relationship. Our data are consistent with a mechanism by which spreading of cells in G1 partially enhances proliferation by inducing nuclear swelling and decreasing chromatin condensation, thereby rendering DNA more accessible to the replication machinery.

Scanning probe microscopy in the field of drug delivery

The scanning probe microscopes (SPMs) are a group of powerful surface sensitive instruments which when used complimentarily with traditional analytical techniques can provide invaluable, definitive information aiding our understanding and development of drug delivery systems. In this review, the main use of the SPMs (particularly the atomic force microscopy (AFM)) and their successes in forwarding drug delivery are highlighted and categorised into two interlinked sections namely, preformulation and formulation. SPM in preformulation concentrates on applications in pharmaceutical processes including, crystal morphology and modification, discriminating polymorphs, drug dissolution and release, solid state stability and interaction. The ability of the AFM to detect forces between different surfaces and at the same time to operate in liquids or controlled humidity and defined temperatures has also been particularly useful in the study of drug delivery. In formulation, the use of SPMs in different drug delivery systems is discussed in light of different host entry routes.

Atomic force microscopy probing of cell elasticity

Atomic force microscopy (AFM) has recently provided the great progress in the study of micro- and nanostructures including living cells and cell organelles. Modern AFM techniques allow solving a number of problems of cell biomechanics due to simultaneous evaluation of the local mechanical properties and the topography of the living cells at a high spatial resolution and force sensitivity. Particularly, force spectroscopy is used for mapping mechanical properties of a single cell that provides information on cellular structures including cytoskeleton structure. This entry is aimed to review the recent AFM applications for the study of dynamics and mechanical properties of intact cells associated with different cell events such as locomotion, differentiation and aging, physiological activation and electromotility, as well as cell pathology. Local mechanical characteristics of different cell types including muscle cells, endothelial and epithelial cells, neurons and glial cells, fibroblasts and osteoblasts, blood cells and sensory cells are analyzed in this paper.

Mechanosensing using drag force for imaging soft biological membranes

We investigate physical processes taking place during nanoscale mechanosensing of soft biological membranes in liquid environments. Examples include tapping mode imaging by atomic force microscope (AFM) and microscopy based on the Brownian motion of a nanoparticle in an optical-tweezers-controlled trap. The softness and fluidity of the cellular membrane make it difficult to accurately detect (i.e., image) the shape of the cell using traditional mechanosensing methods. The aim of the reported work is to theoretically evaluate whether the drag force acting on the nanoscale mechanical probe due to a combined effect of intra- and extracellular environments can be exploited to develop a new imaging mode suitable for soft cellular interfaces. We approach this problem by rigorous modeling of the fluid mechanics of a complex viscoelastic biosystem in which the probe sensing process is intimately coupled to the membrane biomechanics. The effects of the probe dimensions and elastic properties of the membrane as well as intra- and extracellular viscosities are investigated in detail to establish the structure and evolution of the fluid field as well as the dynamics of membrane deformation. The results of numerical simulations, supported by predictions of the scaling analysis of forces acting on the probe, suggest that viscous drag is the dominant force dictating the probe dynamics as it approaches a biological interface. The increase in the drag force is shown to be measurable, to scale linearly with an increase in the viscosity ratio of the fluids on either side of the membrane, and to be inversely proportional to the probe-to-membrane distance. This leads to the postulation of a new strategy for lipid membrane imaging by AFM or other mechanosensing methods using a variation in the maximum drag force as an indicator of the membrane position.

Fluorescence correlation spectroscopy can probe albumin dynamics inside lung endothelial glycocalyx

The endothelial glycocalyx is believed to play a major role in capillary permeability by functioning as a macromolecular barrier overlying the intercellular junction. Little is known about the functional attributes of the glycocalyx (i.e., porosity and permeability) or which constituents contribute to its overall structure-function relationship. In this report, we demonstrate the utility of fluorescence correlation spectroscopy (FCS) to measure albumin diffusion rates and concentration profiles above the cell surface and overlying the intercellular junctions of lung capillary endothelial cells. Albumin diffusion rates and concentration profiles were obtained before and after enzymatic digestion of the glycocalyx with pronase, heparanase, or hyaluronidase. The results suggest a structure interacting with albumin located from 1.0 to 2.0 microm above the cell membrane capable of reducing albumin diffusion by 30% while simultaneously increasing albumin concentration fivefold. Digestion of the glycocalyx with pronase or heparanase resulted in only modest changes in albumin diffusion and concentration profiles. Hyaluronidase digestion completely eliminated albumin-glycocalyx interactions. These data also suggest that hyaluronan is a major determinant for albumin interactions with the lung endothelial glycocalyx. Confocal images of heparan sulfate and hyaluronan confirm a cell-surface layer 2-3 mum in thickness, thus supporting FCS measurements. In summary, we report the first use of FCS to probe extracellular structures and further our understanding of the structure-function relationship of the lung microvascular endothelial glycocalyx.

A new image correction method for live cell atomic force microscopy

During live cell imaging via atomic force microscopy (AFM), the interactions between the AFM probe and the membrane yield distorted cell images. In this work, an image correction method was developed based on the force-distance curve and the modified Hertzian model. The normal loading and lateral forces exerted on the cell membrane by the AFM tip were both accounted for during the scanning. Two assumptions were made in modelling based on the experimental measurements: (1) the lateral force on the endothelial cells was linear to the height; (2) the cell membrane Young's modulus could be derived from the displacement measurement of a normal force curve. Results have shown that the model could be used to recover up to 30% of the actual cell height depending on the loading force. The accuracy of the model was also investigated with respect to the loading force and mechanical property of the cell membrane.

Dose-dependent endothelial cell growth and stiffening by aldosterone: endothelial protection by eplerenone

BACKGROUND

Aldosterone at high concentrations causes an expansion of apical surface area and volume of cultured endothelial cells. These morphological changes are associated with endothelial cell stiffening. Here, we tested the hypothesis that the aforementioned aldosterone actions are confined to aldosterone concentrations within the pathophysiological range. Moreover, we investigated whether endothelial cells of venous and arterial origin respond similarly to aldosterone and whether the new aldosterone antagonist eplerenone effectively prevents endothelial cell growth and stiffening.

METHODS

We used an endothelial cell line of venous origin (EAHy 926) and primary cultures of human coronary artery endothelial cells (HCAEC). Cells were incubated for 72 h with aldosterone at concentrations of 0.1, 1, 10 and 100 nmol/l. Eplerenone was added at a concentration of 2 micromol/l. Applying atomic force microscopy, we scanned cell layers under fixed and living conditions, allowing measurement of endothelial cell apical surface, volume and cellular stiffness.

RESULTS

Aldosterone had comparable effects on EAHy 926 and HCAEC. In EAHy 926, the apical surface increased dose dependently by up to 72 +/- 5% and cell volume by up to 36 +/- 5%. In HCAEC, the maximum increase of apical surface was 78 +/- 6% and maximum cell volume expansion was 58 +/- 6%. Furthermore, aldosterone increased endothelial cell stiffness from 1.47 +/- 0.08 kPa up to 3.95 +/- 0.15 kPa in EAHy 926, and from 1.64 +/- 0.13 kPa up to 4.31 +/- 0.13 kPa in HCAEC. Physiological aldosterone concentrations had no effect, but starting at 1 nmol/l, corresponding to the low pathophysiological range, substantial cell alterations emerged. Eplerenone, at a therapeutic concentration, prevented the observed actions of aldosterone.

CONCLUSIONS

Aldosterone-induced endothelial cell growth and stiffening in vitro begins with concentrations in the low pathophysiological range. The preventive action of eplerenone indicates that the endothelium could be a major target of this drug in vivo.

Supported lipid bilayer/carbon nanotube hybrids

Carbon nanotube transistors combine molecular-scale dimensions with excellent electronic properties, offering unique opportunities for chemical and biological sensing. Here, we form supported lipid bilayers over single-walled carbon nanotube transistors. We first study the physical properties of the nanotube/supported lipid bilayer structure using fluorescence techniques. Whereas lipid molecules can diffuse freely across the nanotube, a membrane-bound protein (tetanus toxin) sees the nanotube as a barrier. Moreover, the size of the barrier depends on the diameter of the nanotube--with larger nanotubes presenting bigger obstacles to diffusion. We then demonstrate detection of protein binding (streptavidin) to the supported lipid bilayer using the nanotube transistor as a charge sensor. This system can be used as a platform to examine the interactions of single molecules with carbon nanotubes and has many potential applications for the study of molecular recognition and other biological processes occurring at cell membranes.

High-resolution analysis of neuronal growth cone morphology by comparative atomic force and optical microscopy

Neuronal growth cones are motile sensory structures at the tip of axons, transducing guidance information into directional movements towards target cells. The morphology and dynamics of neuronal growth cones have been well characterized with optical techniques; however, very little quantitative information is available on the three-dimensional structure and mechanical properties of distinct subregions. In the present study, we imaged the large Aplysia growth cones after chemical fixation with the atomic force microscope (AFM) and directly compared our data with images acquired by light microscopy methods. Constant force imaging in contact mode in combination with force-distant measurements revealed an average height of 200 nm for the peripheral (P) domain, 800 nm for the transition (T) zone, and 1200 nm for the central (C) domain, respectively. The AFM images show that the filopodial F-actin bundles are stiffer than surrounding F-actin networks. Enlarged filopodia tips are 60 nm higher than the corresponding shafts. Measurements of the mechanical properties of the specific growth cone regions with the AFM revealed that the T zone is stiffer than the P and the C domain. Direct comparison of AFM and optical data acquired by differential interference contrast and fluorescence microscopy revealed a good correlation between these imaging methods. However, the AFM provides height and volume information at higher resolution than fluorescence methods frequently used to estimate the volume of cellular compartments. These findings suggest that AFM measurements on live growth cones will provide a quantitative understanding of how proteins can move between different growth cone regions.

Studying the Mechanics of Cellular Processes by Atomic Force Microscopy

The mechanical properties of cells are important for many cellular processes like cell migration, cell protrusion, cell division, and cell morphology. Depending on cell type, the mechanical properties of cells are determined mainly by the cell wall or the interior cytoskeleton. In eukaryotic cells, the stiffness is mainly determined by the cytoskeleton, which is made of several polymeric networks, including actin, microtubuli, and intermediate filaments. To study the mechanical properties of living cells at a subcellular resolution is of outmost importance to understanding the cellular processes mentioned above. One option is to use the atomic force microscopy (AFM) to measure the cell's elastic properties locally. By obtaining force curves, that is measuring the cantilever deflection while the tip is brought in contact and retracted cyclically, effectively the loading force indentation relation is measured. The elastic or Young's modulus can be calculated by applying simple models, like the Hertz model for spherical or parabolic indenters or Sneddon's modification for pyramidal indenters.

Changes induced by hyperosmotic mannitol in cerebral endothelial cells: an atomic force microscopic study

Understanding the reaction of living cells in response to different extracellular stimuli, such as hyperosmotic stress, is of primordial importance. Mannitol, a cell-impermeable non-toxic alcohol, has been used successfully for reversible opening of the blood-brain barrier in hyperosmotic concentrations. In this study we analyzed the effect of hyperosmotic mannitol on the shape and surface structure of living cerebral endothelial cells by atomic force microscope imaging technique. Addition of clinically relevant concentrations of mannitol to the culture medium of the confluent cells induced a decrease of about 40% in the observed height of the cells. This change was consistent both at the nuclear and peripheral region of the cells. After mannitol treatment even a close examination of the contact surface between the cells did not reveal gap between them. We could observe the appearance of surface protrusions of about 100 nm. By force measurements the elasticity of the cells were estimated. While the Young's modulus of the control cells appeared to be 8.04 +/- 0.12 kPa, for the mannitol-treated cells it decreased to an estimated value of 0.93 +/- 0.04 kPa which points to large structural changes inside the cell.

Single membrane tether extraction from adult and neonatal dermal microvascular endothelial cells

Membrane tethers were found to be extracted from leukocytes and macrovascular endothelial cells (e.g., human umbilical vein endothelial cells or HUVECs) when a point pulling force was exerted. These tethers stabilize leukocyte rolling on the endothelium during the inflammatory response. However, little is known about tether extraction from other vascular cells like microvascular endothelial cells (MECs). In this study, we extracted tethers from both adult and neonatal dermal MECs with the micropipette aspiration technique. We found a linear relationship between the pulling force and tether growth velocity for both cell lines. This constitutive relationship is mainly determined by the membrane mechanical property and the underlying actin-based cytoskeleton for both attached and suspended endothelial cells. It is independent of cell surface receptor type, attachment state, cytokine stimulation, or cell lineage. For both types of MECs, the threshold forces are approximately 50 pN and the effective viscosities are around 0.5 pN x s/microm. These results, which are close to what was obtained from HUVECs, indicate that homogeneity is preserved in terms of tether extraction among different types of endothelial cells, and simultaneous tethers are likely extracted when leukocytes roll on either microvascular or macrovascular surfaces.

Atomic force microscopy imaging of actin cortical cytoskeleton of Xenopus laevis oocyte

In this study we report an atomic force microscopy (AFM) investigation of the actin cortical cytoskeleton of Xenopus laevis oocytes. Samples consisted of inside-out orientated plasma membrane patches of X. laevis oocytes with overhanging cytoplasmic material. They were spread on a freshly cleaved mica surface, subsequently treated with Triton X-100 detergent and chemically fixed. The presence of actin fibres in oocyte patches was proved by fluorescence microscopy imaging. Contact mode AFM imaging was performed in air in constant force conditions. Reproducible high-resolution AFM images of a filamentous structure were obtained. The filamentous structure was identified as an actin cortical cytoskeleton, investigating its disaggregation induced by cytochalasin D treatment. The thinnest fibres showed a height of 7 nm in accordance with the diameter of a single actin microfilament. The results suggest that AFM imaging can be used for the high-resolution study of the actin cortical cytoskeleton of the X. laevis oocyte and its modifications mediated by the action of drugs and toxins.

Nanomechanical measurements with AFM in the elastic limit

With increasing interest in nanoscience and nanotechnology, the fundamental underpinnings of what makes materials strong and durable are under critical investigation. Recent findings suggest that when materials are reduced in extent to nanoscopic proportions, they exhibit enhanced strength, specifically in the form of higher moduli than are measured on macroscopic objects of the same composition. Force-deformation behavior of nanostructures subjected to concentrated loads, such as with atomic force microscopy (AFM), can yield detailed information and insight about their local mechanical properties. We review and evaluate the effectiveness of deformation and indentation tests used in determining the elastic modulus of nanobeams, nanosprings, thin films, biological samples, dendrimers, and fluid droplets. Obstacles yet remain in the determination of absolute, quantitative modulus data at the nanoscale. In spite of basic limitations, recent developments in advanced nanomechanical techniques will facilitate improvement in our understanding of material strength and aging from molecules and colloids to the macroscale.

Improving the contrast of topographical AFM images by a simple averaging filter

New image-processing methods were applied to atomic force microscopy images in order to visualize small details on the surface of virus particles and living cells. Polynomial line flattening and plane fitting of topographical images were performed as first step of the image processing. In a second step, a sliding window approach was used for low-pass filtering and data smoothing. The size of the filtering window was adjusted to the size of the small details of interest. Subtraction of the smoothed data from the original data resulted in images with enhanced contrast. Topographical features which are usually not visible can be easily discerned in the processed images. The method developed in this study rendered possible the detection of small patterns on viral particles as well as thin cytoskeleton fibers of living cells. It is shown that the sliding window approach gives better results than Fourier-filtering. Our method can be generally applied to increase the contrast of topographical images, especially when small features are to be highlighted on relatively high objects.

Non-Hertzian Approach to Analyzing Mechanical Properties of Endothelial Cells Probed by Atomic Force Microscopy

Detailed measurements of cell material properties are required for understanding how cells respond to their mechanical environment. Atomic force microscopy (AFM) is an increasingly popular measurement technique that uniquely combines subcellular mechanical testing with high-resolution imaging. However, the standard method of analyzing AFM indentation data is based on a simplified “Hertz” theory that requires unrealistic assumptions about cell indentation experiments. The objective of this study was to utilize an alternative “pointwise modulus” approach, that relaxes several of these assumptions, to examine subcellular mechanics of cultured human aortic endothelial cells (HAECs). Data from indentations in 2‐to5‐μm square regions of cytoplasm reveal at least two mechanically distinct populations of cellular material. Indentations colocalized with prominent linear structures in AFM images exhibited depth-dependent variation of the apparent pointwise elastic modulus that was not observed at adjacent locations devoid of such structures. The average pointwise modulus at an arbitrary indentation depth of 200nm was 5.6±3.5kPa and 1.5±0.76kPa (mean±SD, n=7) for these two material populations, respectively. The linear structures in AFM images were identified by fluorescence microscopy as bundles of f-actin, or stress fibers. After treatment with 4μM cytochalasin B, HAECs behaved like a homogeneous linear elastic material with an apparent modulus of 0.89±0.46kPa. These findings reveal complex mechanical behavior specifically associated with actin stress fibers that is not accurately described using the standard Hertz analysis, and may impact how HAECs interact with their mechanical environment.