The Cornea is Not a Piece of Plastic

Laser in situ keratomileusis disrupts the aberration compensation mechanism of the human eye

PURPOSE

To study how changes induced on corneal optics by myopic and hyperopic laser in situ keratomileusis (LASIK) refractive surgery affect the aberration compensation mechanism.

DESIGN

Interventional case series and modeling theory.

METHODS

We measured ocular, corneal, and internal aberrations for a 6-mm pupil in 15 myopic and 6 hyperopic eyes with similar age range before and 6 months after standard LASIK. Ocular aberrations were measured using our own developed Hartmann-Shack wavefront sensor, whereas corneal aberrations were calculated by using the elevation data obtained by corneal topography. Ocular, corneal, and internal root mean square (RMS), spherical aberration (SA), coma, and compensation factor were compared for each patient.

RESULTS

After myopic LASIK, we obtained an average 1.6-fold increase in ocular RMS, mainly positive SA, and coma, associated with a similar increase in corneal aberrations. In the hyperopes, we found a higher (2.3-fold) induction of ocular aberrations after surgery, mainly negative SA and coma, but without net increases of corneal aberrations. Aberration compensation clearly decreased or even inverted after hyperopic LASIK, decreasing the ocular optical quality in a higher level than myopic LASIK.

CONCLUSIONS

Although ocular aberrations after myopic LASIK usually were smaller than corneal aberrations because of partial compensation of SA, after hyperopic LASIK, because of induction of negative SA and change in coma, disruption of the compensation mechanism lead to a larger increase of ocular aberrations. Customized procedures should maintain the natural compensation to achieve improved visual outcomes.

[Application of wavefront analysis in clinical and scientific settings. From irregular astigmatism to aberrations of a higher order--Part II: examples]

In recent years, wavefront analysis has ceased to be purely a laboratory application and emerged as a method used in ophthalmological diagnosis. This development has been promoted mainly by the widespread use of wavefront-guided LASIK (laser in situ keratomileusis). However, aberrometry is still not a common diagnostic technique, and for many ophthalmologists interpretation of the results is difficult. The second part of this serial paper reviews findings that are relevant for the ophthalmological community and highlights current scientific applications in this area.

Biomechanical effects of femtosecond and microkeratome-based flap creation: prospective contralateral examination of two patients

PURPOSE

To examine flap morphology, corneal topography, and aberrometry after flap creation with a femtosecond laser in one eye and a mechanical microkeratome in the fellow eye. Comparative outcomes after subsequent refractive laser correction were also investigated.

METHODS

Two patients (4 eyes) were enrolled in a clinical study in which LASIK flaps were created using the IntraLase laser set at 90 or 100 microm in one eye and the Moria M2 microkeratome with a 90-microm head in the fellow eye. Pre- and postoperative flap data at 1 day, 1 week, and 1 month were collected before lifting the flap to perform a customized laser ablation (Alcon LADARVision4000 CustomCornea System). Postoperative laser data were collected at 1 week, 1 month, 3 and 6 months, and 1 year. Visual acuity, pachymetry, high-frequency flap ultrasound profilometry (Artemis Ultralink), topography, aberrometry (LADARWave), and refraction were examined and compared between eyes.

RESULTS

Postoperative flap comparisons showed a hyperopic refractive shift in all four eyes with a shift of up to 1.00 diopter (D) in the microkeratome eyes and < 0.50 D in the IntraLase eyes. Corneal topography difference maps showed peripheral steepening that was more pronounced in the microkeratome versus IntraLase eyes (2.00 D vs 0.50 to 1.00 D, respectively). Spherical aberration by wavefront variably increased by 50% to 100% in the microkeratome eyes and remained virtually unchanged in the IntraLase eyes. At 3-month postoperative laser treatment, visual acuity was 20/15 for both eyes in patient 1 and 20/15 in the right eye (IntraLase) and 20/25 in the left eye (microkeratome) in patient 2. Aberrometry revealed a two-fold greater level of higher order aberrations in microkeratome eyes than in IntraLase eyes throughout the postoperative laser period.

CONCLUSIONS

Femtosecond laser and mechanical methods of flap creation lead to subtle biomechanically induced aberrations, which appear more prominent with the mechanical Moria M2 microkeratome in this small case study. Further study with a larger patient population is warranted to determine whether these differences are statistically significant.

Screening for previous refractive surgery in eye bank corneas by using optical coherence tomography

PURPOSE

To use optical coherence tomography (OCT) to detect previous refractive surgery in donor corneas.

METHODS

We constructed a tabletop OCT scanner operating at 1310-nm wavelength. Donor corneas at the Cleveland Eye Bank were scanned while sealed within the sterile container immersed in Optisol GS. OCT scanning was performed with 7.6-mm-long lines (512 axial scans) along 8 meridians. Anterior and posterior corneal surfaces were automatically mapped using image processing software that we developed. Curvature was computed from the best parabolic fit in the central 5-mm diameter. Layered analysis of the stromal reflectivity was also performed. Twenty-nine corneas from 19 donors were examined. Five had a history of laser in situ keratomileusis (LASIK).

RESULTS

The flap interfaces could not be visualized on slit-lamp or OCT images but were confirmed by histology. The death-to-scan time was 22.1 +/- 11.4 (SD) hours for normal corneas and 100.6 +/- 57.5 hours for LASIK corneas. The anterior surface power was 67.5 +/- 2.5 D in control corneas and 64.5 +/- 2.4 D in LASIK corneas (P = 0.023). There was no significance between the 2 groups in terms of posterior curvature and thickness parameters. The anterior/posterior reflectivity ratio in the central 4-mm diameter was significantly lower in post-LASIK corneas than in control (P < 0.05).

CONCLUSIONS

OCT provides thickness, topography, and reflectivity maps of donor corneas without taking them out of preservation medium and container. The anterior curvature and the anterior/posterior stromal reflectivity ratio may be useful for detecting previous LASIK.

A Longitudinal Study of LASIK Flap and Stromal Thickness with High-speed Optical Coherence Tomography

OBJECTIVE

To assess corneal anatomic changes after LASIK with a high-speed corneal and anterior segment optical coherence tomography (CAS-OCT) system.

DESIGN

Cross-sectional observational study.

PARTICIPANTS

Fifty-one eyes of 26 healthy persons undergoing LASIK.

METHODS

The CAS-OCT prototype operated at a 1.3-mum wavelength and 2000 axial scans/second. The corneas were scanned with a flap profile pattern (horizontal line, 512 axial scans) and a flap map pattern (4 radials, 256 axial scans each). Both patterns are 8 mm long and are centered on the corneal vertex. LASIK flaps were created using either a mechanical microkeratome (Hansatome; Bausch & Lomb, Inc., Rochester, NY) or a femtosecond laser (Pulsion; IntraLase Corp., Irvine, CA). Intraoperative pachymetry was performed using a 50-MHz ultrasound probe. Three OCT scans were obtained on preoperative and post-LASIK visits up to 6 months. An automated algorithm was developed to process the OCT images and to calculate corneal, flap, and stromal bed thickness profiles and maps. The profiles and maps were divided into central (diameter, <2 mm), pericentral (2-5 mm), and transitional (5-7 mm) zones for analysis.

MAIN OUTCOME MEASURES

Corneal, flap, and stromal bed thicknesses as determined by OCT and ultrasound pachymetry.

RESULTS

The flap interface was best detected in the pericentral zone. One week after surgery, the repeatability of OCT flap and stromal bed thickness measurement was 2 to 7 microm by pooled standard deviation for zones inside a 5-mm diameter. The central flap thickness in 24 Hansatome eyes with a 180-microm setting was 143+/-14 microm by OCT and 131+/-17 microm by ultrasound. In the 8 IntraLase cases with a 120-microm setting, it was 156+/-11 microm by OCT and 160+/-19 microm by ultrasound. Eyes with other settings also were analyzed. There were small systematic changes in flap thickness up to 1 week and bed thickness up to 3 months.

CONCLUSIONS

We have developed a method for using high-speed OCT to measure LASIK flap thickness after surgery. The measurement is noncontact, rapid, and repeatable. Profile and map measurements provide more information than point measurements previously demonstrated. This could be valuable for planning LASIK enhancement and characterizing microkeratome performance.

Wavefront-guided LASIK for Myopia With the Technolas 217z: Results at 3 Years

PURPOSE

To evaluate the clinical outcome of wavefront-guided LASIK in patients with low to high myopia.

METHODS

The study included 316 eyes of 158 patients; 172 eyes with low to moderate myopia (< or = 6.00 diopters [D]) and 144 eyes with high myopia (> or = 6.25 D). Preoperative wavefront analysis was performed with the Hartmann-Shack aberrometer, and LASIK was done with the Technolas 217z excimer laser. Follow-up was 36 months. Safety, efficacy, predictability, stability, and complications were compared between groups.

RESULTS

Mean preoperative spherical equivalent refraction (SE) was -6.50 +/- 7.72 D (range: -1.50 to -16.00 D) in the entire study group, -4.91 +/- 1.38 D in the low to moderate myopia group, and -9.41 +/- 2.51 D in the high myopia group. At 36 months, 222 (70%) eyes showed no change in best spectacle-corrected visual acuity and 67 (21%) eyes gained > or = 1 line. In the low to moderate myopia group, SE of +/- 0.50 D was achieved by 85% of eyes and +/- 1.00 D by 97%, and 65% and 80%, respectively, in the high myopia group. Undercorrection > 0.50 D was observed in 25% (36 eyes) of the high myopia group and 5% (8 eyes) of the low to moderate myopia group. All eyes showed significant reduction in spherical aberration (Z4,0) at 12 months postoperatively with no complications except diffuse lamellar keratitis in 2 eyes (1 eye in each group).

CONCLUSIONS

Wavefront-guided LASIK is an efficient refractive surgery technique for patients with low to moderate myopia. Higher degrees of myopia may be subject to under- and overcorrection.

Variables affecting refractive outcome following LASIK for myopia

AIM

To investigate factors affecting refractive outcome following LASIK for myopia.

METHOD

Six hundred and seventy-four consecutive uncomplicated myopic LASIK surgeries, performed by a single surgeon, either using the Technolas 217 planoscan (n=372) or the NIDEK EC 5000 (n=302), were evaluated. Stratified random sampling was used to match the groups for refractive error, patient age, and gender. The final analysis included 302 patients from each treatment group. Conditions were identical for both surgeries, and pre-operative refractive errors were between -1.00 and -14.00 DS and <-1.50 DC. Refractive success was defined as -0.50 to +0.50 DS of the targeted refraction measured 3 months after surgery. A stepwise logistical regression analysis was used to determine variables associated with refractive failure.

RESULTS

A successful refractive outcome was achieved in 78% (235/302) of surgeries using the Technolas laser and in 88% (266/302) using the NIDEK laser. Predictor variables for not achieving refractive success were pre-operative refractive error of above -5.00 DS, age more than 40 years, and surgery performed with the Technolas laser.

CONCLUSION

Both the Technolas 217 and the NIDEK EC-5000 excimer lasers achieve a successful refractive outcome in the majority of cases. However, patient and surgical factors can influence refractive outcome.

Customized LASIK Treatment for Myopia Based on Preoperative Manifest Refraction and Higher Order Aberrometry: The Rochester Nomogram

PURPOSE

To develop and test the efficacy of myopic treatment, based on preoperative manifest refraction and higher order aberrations, in enhancing the postoperative refractive error following customized LASIK treatment and compare results with the manufacturer-recommended sphere offset Zyoptix treatment nomogram, which does not account for the preoperative higher order aberrations.

METHODS

One hundred seventy-five myopic eyes (89 patients) were treated based on the Rochester nomogram, which specified the amount of myopia to be treated based on preoperative manifest refraction and higher order aberrations, including third order aberrations and spherical aberration. Postoperative refractive error was measured at 1 month and compared to that theoretically estimated with the Zyoptix nomogram.

RESULTS

The mean preoperative sphere and cylinder were -4.52 +/- 2.05 diopters (D) and -0.81 +/- 0.70 D, respectively. The mean postoperative spheres were +0.04 +/- 0.33 D and +0.31 +/- 0.54 D, using the Rochester and Zyoptix nomograms, respectively. The mean postoperative spherical equivalent refractions were -0.11 +/- 0.34 D and +0.15 +/- 0.53 D using the Rochester and Zyoptix nomograms, respectively. The Rochester nomogram reduced the range of postoperative spherical equivalent to +/- 1.00 D, which was significantly better than that using the Zyoptix nomogram (t = 5.46, P < .0001), which would have resulted in 8% of eyes with a postoperative spherical equivalent refraction > +/- 1.00 D. Using the Rochester nomogram, 93.1% of eyes attained a postoperative UCVA > or = 20/20. The percentage of postoperative hyperopic overcorrection decreased to 2.8% in the Rochester nomogram group from 22.3% using the Zyoptix nomogram, which only adjusts spherical values based on preoperative sphere and does not account for preoperative aberrations.

CONCLUSIONS

The Rochester nomogram compensates for the effect of preoperative higher order aberrations on sphere and provided reduced range of postoperative spherical equivalent refraction.

Surface wave elastometry of the cornea in porcine and human donor eyes

PURPOSE

To introduce a nondestructive technique for characterization of corneal stiffness, determine measurement precision, and investigate comparative stiffness values along central, radial, and circumferential vectors in porcine corneas. The effects of epithelial debridement, relaxing incisions, and crosslink-mediated stiffening on surface wave velocity are also studied.

METHODS

A handheld prototype system was used to measure ultrasound surface wave propagation time between two fixed-distance transducers along a ten-position map. Repeatability was assessed with replicate measurements in 6 porcine corneas. In 12 porcine globes with controlled intraocular pressure (IOP), serial measurements were performed before and after epithelial removal, then after 250- and 750-microm-deep relaxing incisions. In human globes with constant intravitreal pressure, central wave velocity and transcorneal IOP measurements were compared before and after collagen cross-linking.

RESULTS

Measurement repeatability across all regions was between 2.2% and 8.1%. Epithelial removal resulted in increases in measured stiffness in 67% of eyes, but statistical power was insufficient to detect a systematic change. Wave velocity across a central incision decreased significantly after 250-microm keratotomy (P < .001), but did not undergo a significant further decrease with deeper keratotomy. Meridional stiffness changes consistent with coupling effects were detected after keratotomy. Surface wave velocity and transcorneal IOP measurements increased markedly after collagen cross-linking despite maintenance of a constant IOP.

CONCLUSIONS

Handheld corneal elastometry provides a repeatable measure of regional stiffness changes after relaxing incisions and collagen cross-linking in in vitro experiments. Surface wave elastometry allows focal assessment of corneal biomechanical properties that are relevant in refractive surgery, ectatic disease, and glaucoma.

Two-step laser in situ keratomileusis to correct high astigmatism after corneal autograft

We report a case in which significant anisometropia and astigmatism after an autograft by rotation was treated by a 2-step laser in situ keratomileusis (LASIK) procedure. Six weeks after the lamellar keratotomy, photoablation was performed using the LADARVision 4000 excimer laser. The ablation depth was 87.2 mum on a 6.0 mm optical zone. One day postoperatively, the uncorrected visual acuity (UCVA) was 7/10 and the refractive error was -0.25 -0.25 x 67. Two months later, the UCVA was 5/10 and the best corrected visual acuity, 8/10 Parinaud 2 with a refractive error of +1.75 -1.25 x 16. The case demonstrates the effectiveness of 2-step LASIK for the correction of astigmatism induced by a corneal autograft. The significant reduction in autograft-induced astigmatism, together with stabilization of the higher-order aberrations, resulted in restoration of satisfactory functional vision.

Biomechanics and wound healing in the cornea

The biomechanical and wound healing properties of the cornea undermine the predictability and stability of refractive surgery and contribute to discrepancies between attempted and achieved visual outcomes after LASIK, surface ablation and other keratorefractive procedures. Furthermore, patients predisposed to biomechanical failure or abnormal wound healing can experience serious complications such as keratectasia or clinically significant corneal haze, and more effective means for the identification of such patients prior to surgery are needed. In this review, we describe the cornea as a complex structural composite material with pronounced anisotropy and heterogeneity, summarize current understanding of major biomechanical and reparative pathways that contribute to the corneal response to laser vision correction, and review the role of these processes in ectasia, intraocular pressure measurement artifact, diffuse lamellar keratitis (DLK) and corneal haze. The current understanding of differences in the corneal response after photorefractive keratectomy (PRK), LASIK and femtosecond-assisted LASIK are reviewed. Surgical and disease models that integrate corneal geometric data, substructural anatomy, elastic and viscoelastic material properties and wound healing behavior have the potential to improve clinical outcomes and minimize complications but depend on the identification of preoperative predictors of biomechanical and wound healing responses in individual patients.

Customized LASIK Treatment for Myopia: Relationship Between Preoperative Higher Order Aberrations and Refractive Outcome

PURPOSE

To analyze the effect of preoperative higher order aberrations on postoperative sphere and cylinder outcome.

METHODS

Three hundred thirty myopic eyes (mean: -3.32 +/- 1.54 diopters [D], range: -1.0 to -7.0 D) treated with customized ablation using the Technolas 217z laser (Bausch & Lomb) were followed through 6 months after LASIK. Pre- and postoperative visual acuity, higher order root mean square (RMS), third order RMS, and spherical aberration were compared to study the safety and efficacy of the treatment. The relationship between preoperative higher order aberrations and manifest refraction after LASIK was analyzed.

RESULTS

Following LASIK, 91.5% of eyes obtained an uncorrected visual acuity of > or = 20/20 and 70.3% of eyes obtained 20/16 without retreatment; 99% had a best spectacle-corrected visual acuity of > or = 20/20 (75.9% of eyes were within +/- 0.50 D). Mean value of significant increase in postoperative higher order aberrations was 0.12 +/- 0.18 microm (P<.0001). Increased spherical aberration was associated with increased myopia treatment (P<.0001). Greater positive spherical aberration after LASIK was significantly correlated to postoperative hyperopia (overcorrection). Change in third order RMS was significantly correlated to change in spherical equivalent refraction among eyes with postoperative astigmatism (P<.0001).

CONCLUSIONS

With the Bausch & Lomb Technolas 217z Zyoptix software, treatment of higher order aberrations, especially third order (coma and trefoil) and spherical aberration, significantly improved postoperative refractive status.

Post-laser in-situ keratomileusis ectasia: current understanding and future directions

PURPOSE OF REVIEW

The aim of this article is to review the causes, risk factors, management, and future research directions for corneal ectasia after laser in situ keratomileusis.

RECENT FINDINGS

Complex corneal biomechanical processes influence the integrity of the normal and postoperative cornea, and developing an understanding of these processes facilitates recognition of risk factors for ectasia after laser in-situ keratomileusis. Currently identified risk factors include keratoconus, high myopia, low residual stromal bed thickness from excessive ablation or thick flap creation, and defined topographic abnormalities such as forme fruste keratoconus and pellucid marginal corneal degeneration. Ectasia can also rarely occur in patients without currently identifiable risk factors, and future identification of at-risk patients may be facilitated by corneal interferometry and corneal hysteresis measurements. Utilization of intraoperative pachymetry measurements at the time of surgery and confocal microscopy prior to enhancement to measure residual stromal bed thickness should avoid unanticipated low residual stromal bed thickness. Management options for ectasia after laser in situ keratomileusis include intraocular pressure reduction, rigid gas permeable contact lenses, and intracorneal ring segments, in addition to corneal transplantation. In the future, collagen cross-linking may reduce corneal steepening and improve refractive error.

SUMMARY

When ectasia develops, early recognition and proper management are essential to prevent progression, to promote visual rehabilitation, and to reduce the need for corneal transplantation for these patients.

Zyoptix wavefront-guided versus standard photorefractive keratectomy (PRK) in low and moderate myopia: randomized controlled 6-month study

PURPOSE

To evaluate the refractive and aberrometric outcome of wavefront-guided photorefractive keratectomy (PRK) compared to standard PRK in myopic patients.

METHODS

Fifty-six eyes of 56 patients were included in the study and were randomly divided into two groups. The study group consisted of 28 eyes with a mean spherical equivalent (SE) of -2.25+/-0.76 diopters (D) (range: -1.5 to -3.5 D) treated with wavefront-guided PRK using the Zywave ablation profile and the Bausch & Lomb Technolas 217z excimer laser (Zyoptix system) and the control group included 28 eyes with a SE of -2.35+/-1.01 D (range: -1.5 to -3.5 D) treated with standard PRK (PlanoScan ablation) using the same laser. A Zywave aberrometer was used to analyze and calculate the root-mean-square (RMS) of total high order aberrations (HOA) and Zernike coefficients of third and fourth order before and after (over a 6-month follow-up period) surgery in both groups. Preoperative and postoperative SE, un-corrected visual acuity (UCVA), and best-corrected visual acuity (BCVA) were evaluated in all cases.

RESULTS

There was a high correlation between achieved and intended correction. The differences between the two treatment groups were not statistically significant for UCVA, BCVA, or SE cycloplegic refraction . Postoperatively the RMS value of high order aberrations was raised in both groups. At 6-month control, on average it increased by a factor of 1.17 in the Zyoptix PRK group and 1.54 in the PlanoScan PRK group (p=0.22). In the Zyoptix group there was a decrease of coma aberration, while in the PlanoScan group this third order aberration increased. The difference between postoperative and preoperative values between the two groups was statistically significant for coma aberration (p=0.013). No statistically significant difference was observed for spherical-like aberration between the two groups. In the study group eyes with a low amount of preoperative aberrations (HOA RMS lower than the median value; <0.28 microm) showed an increase of HOA RMS while eyes with RMS higher than 0.28 microm showed a decrease (p<0.05).

CONCLUSIONS

Zyoptix wavefront-guided PRK is as safe and efficacious for the correction of myopia and myopic astigmatism as PlanoScan PRK. Moreover this technique induces a smaller increase of third order coma aberration compared to standard PRK. The use of Zyoptix wavefront-guided PRK is particularly indicated in eyes with higher preoperative RMS values.

75 MHz ultrasound biomicroscopy of anterior segment of eye

Very high frequency ultrasound (35-50 MHz) has had a significant impact upon clinical imaging of the anterior segment of the eye, offering an axial resolution as small as 30 microm. Higher frequencies, while potentially offering even finer resolution, are more affected by absorption in ocular tissues and even in the fluid coupling medium. Our aim was to develop and apply improved transducer technology utilizing frequencies beyond those routinely used for ultrasound biomicroscopy of the eye. A 75-MHz lithium niobate transducer with 2 mm aperture and 6 mm focal length was fabricated. We scanned the ciliary body and cornea of a human eye six years post-LASIK. Spectral parameter images were produced from the midband fit to local calibrated power spectra. Images were compared with those produced using a 35 MHz lithium niobate transducer of similar fractional bandwidth and focal ratio. The 75-MHz transducer was found to have a fractional bandwidth (-6 dB) of 61%. Images of the post-LASIK cornea showed higher stromal backscatter at 75 MHz than at 35 MHz. The improved lateral resolution resulted in better visualization of discontinuities in Bowman's layer, indicative of microfolds or breaks occurring at the time of surgery. The LASIK surface was evident as a discontinuity in stromal backscatter between the stromal component of the flap and the residual stroma. The iris and ciliary body were visualized despite attenuation by the overlying sclera. Very high frequency ultrasound imaging of the anterior segment of the eye has been restricted to the 35-50 MHz band for over a decade. We showed that higher frequencies can be used in vivo to image the cornea and anterior segment. This improvement in resolution and high sensitivity to backscatter from the corneal stroma will provide benefits in clinical diagnostic imaging of the anterior segment.

Anterior Chamber Depth Measurement before and after Photorefractive Keratectomy

PURPOSE

To measure the anterior chamber depth (ACD) with 2 different devices before and after photorefractive keratectomy (PRK).

DESIGN

Noncomparative case series.

PARTICIPANTS

One hundred forty-three eyes of 143 patients who had undergone PRK with refractive errors ranging from -13.13 diopters (D) to +7 D (mean, -3.67+/-3.58) were analyzed.

METHODS

The ACD values preoperatively and at 1, 3, and 6 months postoperatively were measured with the Orbscan II and IOL Master. The results were analyzed using the Pearson correlation.

MAIN OUTCOME MEASURE

Anterior chamber depth.

RESULTS

The instruments showed good agreement between the measurements before and after surgery. A significant decrease between the preoperative and 1-month postoperative measurements was found in the ACD measured from the epithelium with Orbscan II (P<0.01) and IOL Master (P<0.01). A nonsignificant decrease with both IOL Master (P>0.01) and Orbscan II (P>0.01) was found between 3 and 6 months after surgery. The ACD measured from the endothelium using the Orbscan II showed a significant difference only between the 3- and 6-month follow-up data (P<0.01).

CONCLUSIONS

The 2 devices showed good agreement, and the changes detected postoperatively seem to be related not only to corneal thinning but also to anterior segment remodeling.

Topography-guided Treatment of Irregular Astigmatism With the WaveLight Excimer Laser

PURPOSE

To evaluate the feasibility, safety, and predictability of correcting high irregular astigmatism in symptomatic eyes with the use of topography-guided photoablation.

METHODS

In a prospective, non-comparative case series, 16 consecutive symptomatic eyes of 11 patients with small hyperopic and myopic excimer laser optical zones, decentered and irregular ablation after corneal graft, and corneal scars were operated. Uncorrected visual acuity (UCVA), best spectacle-corrected visual acuity (BSCVA), manifest and cycloplegic refraction, and corneal topography, with asphericity and regularity, were analyzed. LASIK (n = 10) and photorefractive keratectomy (n = 6) were performed using the ALLEGRETTO WAVE excimer laser and T-CAT software (Topography-guided Customized Ablation Treatment; WaveLight Laser Technologie AG, Erlangen, Germany).

RESULTS

In the LASIK group, UCVA improved from 0.81 +/- 0.68 IogMAR (20/130) (range: 0.2 to 2.0) to 0.29 +/- 0.21 logMAR (20/39) (range: 0.1 to 0.7) at 6 months. In the PRK group, mean UCVA improved from 0.89 +/- 0.87 IogMAR (20/157) (range: 0.1 to 2.0) to 0.42 +/- 0.35 logMAR (20/53) (range: 0.1 to 1.0) at 6 months. Best spectacle-corrected visual acuity did not change significantly in either group. One PRK patient lost one line of BSCVA. Refractive cylinder for the LASIK group improved from -2.53 +/- 1.71 diopters (D) (range: -0.75 to -5.75 D) to -1.28 +/- 0.99 D (range: 0 to -2.50 D) at 6 months. Refractive cylinder in the PRK group improved from -2.21 +/- 2.11 D (range: -0.25 to -5.50 D) to -1.10 +/- 0.42 D (range: -0.50 to -1.50 D). Index of surface irregularity showed a decrease from 60 +/- 12 (range: 46 to 89) to 50 +/- 9 (range: 32 to 63) at 6 months in the LASIK group whereas no significant change was noted in the PRK group. Subjective symptoms, such as glare, halos, ghost images, starbursts, and monocular diplopia, were not present postoperatively.

CONCLUSIONS

Topography-guided LASIK and PRK resulted in a significant reduction of refractive cylinder and increase of UCVA, without a significant loss of BSCVA.

System performance evaluation of refractive surgical lasers: a mathematical approach

A study was conducted for the purpose of improving the designs of the next generation of refractive surgical laser systems. Two common refractive laser systems, variable-spot scanning (type A) and small-spot scanning (type B), are discussed by identifying sources of error that could adversely affect the capability of these lasers to accurately produce complex, customized wavefront guided ablations. A mathematical model was used to construct a laser simulator that models the two common laser systems in terms of the root-mean-square error. Error sources from ablation profile fitting, ablation registration, eye tracking, and the laser delivery system are compared, and the relative contribution of each to the overall system error is analyzed. This system-level analysis can be helpful to the improvement of both laser systems.

Comparison of forward shift of posterior corneal surface after operation between LASIK and LASEK

PURPOSE

To compare the forward shift of the posterior corneal surface as a function of time after surgery between successful laser in situ keratomileusis (LASIK) and laser-assisted subepithelial keratectomy (LASEK).

METHODS

Twenty-two eyes from 14 patients who underwent LASIK and 19 eyes from 10 patients who underwent LASEK were reviewed retrospectively. The uncorrected visual acuity, spherical equivalent and pachymetry were obtained before and 1 or 2 weeks and 2, 6, 12, and 24 months after surgery. The change in the elevation of the posterior corneal surface was assessed using the difference map of an Orbscan II (Bausch and Lomb, Salt Lake City, Utah, USA), which was generated from the preoperative and subsequent postoperative elevation map.

RESULTS

One or 2 weeks after LASIK and LASEK, the posterior corneal surface had shifted forward by 18.00 and 25.90 microm, respectively (p = 0.008). However, the mean posterior corneal surface reduced by 3.05 microm from 1 or 2 weeks to 2 years in the LASIK group (p = 0.359). In contrast, the mean posterior corneal surface had reduced by 12.40 microm in the LASEK group (p = 0.004). This forward shift did not return to the corneal normal elevation observed prior to surgery in the two groups.

CONCLUSIONS

Refractive surgery induced a forward shift of the posterior corneal surface early postoperatively in the LASIK and LASEK groups, and this change after LASEK was significantly larger than that observed after LASIK. The posterior corneal surface gradually shifted backwards depending on the time course in both groups, but they did not return to the preoperative levels.

Response of the Cornea for up to Four Years After Photorefractive Keratectomy for Myopia

PURPOSE

To analyze the long-term corneal topographic changes 4 years after myopic photorefractive keratectomy (PRK).

METHODS

This study comprised 15 patients (30 eyes) who had PRK surgery with a scanning-spot excimer laser (Chiron Technolas 217C; Bausch & Lomb, Dornach, Germany) and were followed up to 4 years after surgery. The eyes were subdivided into three groups according to the preoperative spherical equivalent refraction. Corneal topographic maps were obtained for all eyes with a Placido disc topographer. Preoperative and follow-up topographical data were imported into a custom software program, which computed the average composite corneal maps and difference maps for each study group to quantify the anterior corneal changes following laser ablation. The software delineated three concentric zones of the corneal surface to characterize the regional corneal remodeling following the surgery.

RESULTS

A significant central corneal steepening (approximately 0.25 D, P < .001) was calculated between the 1- and 4-year postoperative maps in all study groups. A significant steepening (P < .001) of the corneal periphery was also noted for the lower myopic ablations whereas a peripheral flattening (P < .001) was observed for the deeper ablations between 1 and 4 years after surgery.

CONCLUSIONS

The anterior corneal surface was observed to remodel for up to 4 years after surface ablation, steepening a mean of approximately 0.25 D.

Photorefractive keratectomy with aspheric profile of ablation versus conventional photorefractive keratectomy for myopia correction

PURPOSE

To analyze ocular wavefront error and corneal asphericity (Q) in patients treated with aspheric profile photorefractive keratectomy (PRK) compared with patients having conventional PRK to correct myopia and myopic astigmatism and to evaluate the effect of postoperative corneal shape on visual performance.

SETTING

Eye Clinic, University G. d'Annunzio, Chieti-Pescara, Italy.

METHODS

Fifty eyes were treated with aspheric profile PRK using the MEL 80 flying-spot excimer laser, and 24 eyes were treated with standard PRK using the MEL 70 flying-spot excimer laser.

RESULTS

Postoperative wavefront error increased in both groups. Six months after surgery, there was a smaller increase in root mean square (RMS) of total higher-order aberrations and spherical aberration (59% and 106%, respectively) in the aspheric profile PRK group than in the conventional PRK group (94% and 136%, respectively) (P<.01). The aspheric profile PRK group showed more prolate corneal asphericities (mean Q of 0.15 +/- 0.26) than the conventional group (mean Q of 0.45 +/- 0.26) (P<.001), with increasing oblateness for higher attempted corrections. A higher percentage of patients with better low-contrast uncorrected visual acuity and best corrected visual acuity was observed in the aspheric PRK group than in the conventional PRK group (P<.05).

CONCLUSIONS

Aspheric profile and conventional PRK were safe and efficient for the correction of myopia and myopic astigmatism. Moreover, aspheric profile PRK induced a smaller increment of total wavefront error, was related to a smaller increase in spherical aberration, and better maintained the physiology of the corneal surface than conventional treatment.

Corneal polarimetry after LASIK refractive surgery

Imaging polarimetry provides spatially resolved information on the polarization properties of a system. In the case of the living human eye, polarization could be related to the corneal biomechanical properties, which vary from the normal state as a result of surgery or pathologies. We have used an aberro-polariscope, which we recently developed, to determine and to compare the spatially resolved maps of polarization parameters across the pupil between normal healthy and post-LASIK eyes. The depolarization distribution is not uniform across the pupil, with post-surgery eyes presenting larger levels of depolarization. While retardation increases along the radius in normal eyes, this pattern becomes irregular after LASIK refractive surgery. The maps of slow axis also differ in normal and post-surgery eyes, with a larger disorder in post-LASIK eyes. Since these changes in polarization indicate subtle structural modifications of the cornea, this approach can be useful in a clinical environment to follow the biomechanical and optical changes of the cornea after refractive surgery or for the early diagnosis of different corneal pathologies.

Two-step LASIK With Topography-guided Ablation to Correct Astigmatism After Penetrating Keratoplasty

PURPOSE

To assess the efficacy, predictability, stability, and safety of a two-step LASIK procedure using topography-guided ablation to correct astigmatism after penetrating keratoplasty.

METHODS

Fifteen eyes of 15 patients underwent a two-step LASIK procedure at the Maggiore Hospital of Bologna, Italy. In the first step, a flap was created using the Hansatome microkeratome. In the second step, topography-guided ablation using the LaserSight LSX was planned with interactive software (CIPTA) once topographical and refractive stabilization had been obtained. Uncorrected visual acuity (UCVA), best spectacle-corrected visual acuity (BSCVA), cylindrical correction, gain of lines of BSCVA, spherical equivalent refraction, and complications were analyzed.

RESULTS

Minimum follow-up was 12 months (range: 12 to 30 months). Uncorrected visual acuity improved in all 15 (100%) eyes. At the last postoperative examination, 11 (73%) eyes had UCVA > or = 20/40. Nine (60%) eyes were within 1.0 diopter (D) of the attempted correction. Mean postoperative astigmatism was -1.67 (range: -3.5 to 0; standard deviation: 1.26). Index of success of astigmatic correction was 0.26. No patient lost Snellen lines of BSCVA. Intraoperative complications included two buttonhole flaps, and postoperative complications included one flap retraction. No further laser treatment was needed.

CONCLUSIONS

The two-step LASIK procedure using topography-guided ablation reduces spherical and cylindrical refractive error due to penetrating keratoplasty. Topography-guided ablation also proved to be effective in correcting irregular astigmatism.

The thin-flap LASIK technique

PURPOSE

To determine if LASIK using a 130-microm microkeratome head (thin-flap LASIK) is as visually effective and safe as when using a 160-microm head.

METHODS

A study was performed comparing postoperative day 1 uncorrected visual acuity (UCVA) and flap complications in eyes undergoing myopic LASIK with a 130-microm head versus a 160-microm head using the BD K-3000 microkeratome (BD Ophthalmic Systems, Waltham, Mass).

RESULTS

The mean preoperative myopia in the 155 eyes of 80 patients in the 130-microm head group was -5.00+/-2.53 diopters (D) compared to -3.78+/-1.73 D in the 279 eyes of 148 patients in the 160-microm head group. The groups were otherwise similar in terms of age, preoperative cylinder, and best spectacle-corrected visual acuity. The geometric mean postoperative day 1 UCVA was 20/25 in the 130-microm head group compared to 20/26 in the 160-microm head group. The only flap complication in the series was a single partial flap in the 160-microm head group.

CONCLUSIONS

LASIK with a 130-microm head (thin-flap LASIK) is as visually effective and safe as when using a 160-microm head with the BD K-3000 microkeratome.

Flap-induced and Laser-induced Ocular Aberrations in a Two-step LASIK Procedure

PURPOSE

To identify aberrations created by making a laser in situ keratomileusis (LASIK) flap and treating the refractive error with laser ablation at a later date.

METHODS

Twenty-two eyes (11 patients) underwent a two-step LASIK procedure with the Alcon LADAR-Vision laser (Alcon Laboratories, Ft Worth, Tex). In the first step, a flap was created, and 1 month later the flap was lifted and laser ablation performed. Aberrations were measured with the LADARWave wavefront measurement device preoperatively, after making the flap (1 day, 1 week, 1 month) and after laser treatment (1 week and 3 months). Two different microkeratomes were used (Moria M2 [Moria; Antony, France] and SKBM [Alcon]). With the SKBM, all flap hinges were nasal; with the Moria M2, the flap hinge was randomly selected as superior in one eye and nasal in the other.

RESULTS

A slight hyperopic shift was seen in the manifest and wavefront refractions at 1 week and 1 month after flap creation for the Moria M2, but not for the SKBM. Statistically significant change in manifest sphere with the Moria M2 showed a mean shift at 1 month of +0.50 +/- 0.08 diopters (D) whereas the SKBM showed no mean shift, but less reproducibility, +0.06 +/- 0.17 D. Higher order aberrations after flap creation were statistically significantly higher for all except coma with both microkeratomes, but with no predictable trends observed. Although higher in magnitude, post flap aberrations were less than one quarter the increase noted in post laser aberrations, except for "other terms."

CONCLUSIONS

Creating a LASIK flap induces changes in lower and higher order ocular aberrations. The change in lower order terms is microkeratome dependent. Higher order aberrations increase to a much larger degree after laser than after flap, making a two-step procedure unnecessary in conventional LASIK.

Strategic Planning in Topography-guided Ablation of Irregular Astigmatism After Laser Refractive Surgery

PURPOSE

To identify an optimal customized ablation strategy in the treatment of eyes with secondary irregular astigmatism.

METHODS

Corneal anterior surface elevation maps of 50 eyes with secondary irregular astigmatism after decentered laser in situ keratomileusis (LASIK) or photorefractive keratectomy (PRK) and 50 virgin eyes were used for customized ablation simulations. Two ablation simulations with targeted postoperative surfaces perpendicular to either the visual or corneal morphological axis were made for each eye. All ablations were programmed for correction of corneal irregularities, including corneal astigmatism. The manifest refractive error was not corrected. Optical diameter was 6.5 mm and total diameter was 7.5 mm. Maximum ablation depths and maximum transition zone gradients were registered and analyzed.

RESULTS

In eyes with secondary irregular astigmatism, mean maximum ablation depth was 48.21 +/- 25.96 microm and 26.31+/- 14.08 microm, whereas mean maximum transition zone gradient was 29.07 +/- 25.15 microm and 9.88 +/- 6.41 microm in ablation simulations based on the visual and corneal morphological axes, respectively. The difference between the ablation strategies was highly statistically significant for both parameters (P < .001). In virgin eyes, only a minor difference was noted between the visual and corneal morphological axis ablation simulations (P = .15 for maximum ablation depths and P=.19 for maximum transition zone gradient).

CONCLUSIONS

In secondary irregular astigmatism, ablation based on the corneal morphological axis appears to minimize corneal tissue consumption and allows a smoother transition zone.

High Interocular Corneal Symmetry in Average Simulated Keratometry, Central Corneal Thickness, and Posterior Elevation

PURPOSE

The purpose of this study was to assess interocular corneal symmetry in average simulated keratometry, corneal thickness, and posterior corneal elevation.

METHODS

This retrospective analysis included data from scanning slit topography (Orbscan II; Bausch and Lomb, Rochester, NY) on 242 eyes from 121 consecutive patients undergoing standard evaluation for consideration of elective laser vision correction. The symmetry between the right and left eye in average simulated keratometry, minimum central corneal thickness, and posterior corneal elevation was assessed by comparative data analysis.

RESULTS

Simulated keratometry ranged from 39.9 to 48.6 D. The interocular difference in average simulated keratometry was 0.47 D (standard deviation [SD] 0.43). The interocular Pearson correlation coefficient for average simulated keratometry was 0.90 (p < 0.001). The range of minimum corneal thickness was 432 to 628 microm. The interocular Pearson correlation coefficient for minimum central corneal thickness was 0.95 (p < 0.001). Right and left eye minimum corneal thickness differed by an average 8 microm (SD 7). The range of posterior elevation was -4 to 54 microm. The average difference in posterior corneal elevation between the right and left eye was 6 microm (SD 5). The interocular Pearson correlation coefficient for posterior corneal elevation was 0.72 (p < 0.001). The average posterior elevation was 19 microm (SD 11).

CONCLUSIONS

Although a wide range of values exists in simulated keratometry, minimum corneal thickness, and posterior corneal elevation, interocular symmetry in all these parameters was very high in this group of consecutive patients. Asymmetry of these interocular parameters may warrant repeat clinical testing for accuracy and may predict corneal abnormalities. Normative data on posterior cornea elevation is presented. This study points out potentially clinically important high interocular corneal symmetry data in simulated keratometry, corneal thickness, and posterior corneal elevation.

Factors Predictive of LASIK Flap Thickness With the Hansatome Zero Compression Microkeratome

PURPOSE

To determine the explanatory power of preoperative variables and comeal flap thickness in laser in situ keratomileusis (LASIK) using the Hansatome zero compression microkeratome (Bausch & Lomb, Rochester, NY).

METHODS

A prospective, nonrandomized, comparative interventional case study was performed on 250 eyes of 129 consecutive patients who underwent LASIK surgery using the Hansatome zero compression microkeratome. A 160-microm or 180-microm microkeratome head and an 8.5- or 9.5-mm suction ring were used in the procedures. Preoperative measurements included refraction, spherical equivalent, keratometry, intraocular pressure, corneal white-to-white, anterior chamber depth, and corneal eccentricity. Corneal thickness was measured intraoperatively using ultrasonic pachymetry before and after flap creation, and the difference was taken as flap thickness. Flap diameter was measured with a corneal gauge. Data were analyzed using simple, multiple, stepwise linear and non-linear regression analyses and two-tailed t tests.

RESULTS

The mean flap thickness was 124 +/- 17 microm with the nominal 160-microm head and 142 +/- 20 microm with the nominal 180-microm head. One third (33%) of the total variation in flap thickness could be accounted for by three preoperative variables: average corneal thickness, spherical equivalent refraction, and choice of 160- or 180-microm microkeratome head. A simple correlation of 0.114 was noted between corneal eccentricity and flap thickness, but this variable did not add significant explanatory power on multiple regression analysis. Linear regression analysis allowed determination of a flap thickness nomogram with a standard error of the estimate of 16.9 microm and a 95% confidence interval of +/- 33.1.

CONCLUSIONS

Comeal thickness is the most systematic predictor of corneal flap thickness using the Hansatome microkeratome. Because three preoperative variables account for only 33% of the range in flap thickness, future studies should focus on variations in blade extension and corneal biomechanical factors, which may also play an important role in determining flap thickness.

Axial Eye Length Evaluation Before and After Myopic Photorefractive Keratectomy

PURPOSE

To test the accuracy of a new device (IOL Master; Carl Zeiss, Jena, Germany) in detecting axial eye length changes after photorefractive keratectomy (PRK).

METHODS

Pre- and postoperative (1, 3, and 6 months) subjective refraction and axial eye length measurements were performed in 184 consecutive eyes that underwent PRK with the Nidek EC5000 excimer laser (Nidek Technologies, Gamagori, Japan) to treat refractive errors from +0.25 to -16.25 diopters (D) (mean: -5.12 +/- 3.01 D).

RESULTS

The axial eye length measurements ranged from 22.51 to 31.32 mm (mean: 25.61 +/- 1.47 mm) before PRK; from 22.39 to 31.10 mm (mean: 25.48 +/- 1.43 mm) 1 month after PRK; from 23.17 to 31.14 mm (mean: 25.61 +/- 1.36 mm) 3 months after PRK; and from 23.36 to 29.68 mm (mean: 25.58 +/- 1.35 mm) 6 months after PRK. Preoperative and 1-month postoperative data showed a statistically significant difference (P<.001), whereas no significant difference was found between 1 and 3 months (P=.0137) or 3 and 6 months (P=.2422).

CONCLUSIONS

The IOL Master showed a decrease in the axial eye length measurement larger than the theoretical ablation depth and the difference increased as the correction became higher.

Causes of spherical aberration induced by laser refractive surgery

PURPOSE

To develop a corneal model to better explain how refractive surgery procedures induce spherical aberration.

SETTING

Department of Ophthalmology and Center for Visual Science, University of Rochester, Rochester, New York, USA.

METHODS

The preoperative cornea was modeled as a rotationally symmetric surface with various radii of curvature and asphericities. The postoperative cornea was defined as the difference between the preoperative cornea and an ablation thickness profile computed based on the Munnerlyn equation. A ray-tracing program and Zernike polynomial fitting were used to calculate the induced amount of spherical aberration assuming a fixed ablation depth per pulse or a variable ablation depth depending on the incidence angle of each pulse on the cornea. A biological eye model of the corneal surface change after laser refractive surgery was also developed to explain the induced spherical aberrations after myopic and hyperopic treatments.

RESULTS

The clinical data showed that positive spherical aberration was induced after myopic correction and negative spherical aberration increased after hyperopic correction. In contrast, assuming a fixed ablation depth per pulse, the theoretical prediction was that negative spherical aberration with myopic treatment and positive spherical aberration with hyperopic treatment would increase. However, when assuming a variable ablation depth per pulse caused by non-normal incidence of laser spot on the cornea, the theoretically predicted induction of spherical aberration tends to fit better with the myopic and hyperopic clinical data. The effect of a variable ablation depth accounted for approximately half the clinically observed amount of spherical aberration. The biological model of the corneal surface change used to explain this remaining discrepancy showed the magnitude of the biological response in myopic correction is 3 times smaller than in hyperopic correction and that the direction of the biological response in hyperopic treatment is opposite that in myopic treatment.

CONCLUSIONS

This nontoric eye model, which separates the effects of differences in ablation efficiency and biological corneal surface change quantitatively, explains how spherical aberration is induced after myopic and hyperopic laser refractive surgery. With the corneal topographic data, this model can be incorporated into the ablation algorithm to decrease induced spherical aberrations, improving the outcomes of conventional and customized treatments.

Prediction of flap response

PURPOSE

To find predictors of the induced biomechanical and optical effects of lamellar flap creation on the cornea.

SETTING

Optimed Eye and Laser Clinic, Pretoria, South Africa, and the Department of Ophthalmology and Biomedical Engineering Center, The Ohio State University, Columbus, Ohio, and Bausch & Lomb Vision Research Laboratory, Rochester, New York, USA.

METHODS

This prospective study monitored the refractive, wavefront aberration, and corneal topographic changes in 29 eyes of 15 patients for 3 months after the creation of a corneal lamellar flap. The main outcome measures for statistical analysis were refraction, total corneal thickness, residual corneal bed thickness, horizontal white-to-white corneal diameter, horizontal flap diameter, topography data, and wavefront data.

RESULTS

Statistically significant changes were seen in the autorefraction mode. Wavefront data showed significant change in 4 Zernike modes-90/180-degree astigmatism, vertical coma, horizontal coma, and spherical aberration. The topography data indicated the corneal biomechanical response was significantly predicted by stromal bed thickness in the early follow-up period and by total corneal pachymetry and flap diameter in a 2-parameter statistical model in the late follow-up period.

CONCLUSIONS

Uncomplicated lamellar flap creation is responsible for systematic changes in corneal topography and induction of higher-order optical aberrations. Predictors of this response include stromal bed thickness, flap diameter, and total corneal pachymetry.

Visual field changes after laser in situ keratomileusis

PURPOSE

To determine whether laser in situ keratomileusis (LASIK) affects the central 30-degree visual field.

SETTING

University-based ophthalmology practice.

METHODS

This nonrandomized clinical trial comprised 14 normal patients (27 eyes) scheduled to have LASIK for myopia or myopic astigmatism. Automated static perimetry was performed before and 6 months after surgery using the Octopus 1-2-3 perimeter and the Dynamic-32 test strategy. Patient data included sex, age, preoperative and postoperative refractive errors, preoperative and postoperative best corrected visual acuity, preoperative corneal thickness, programmed optical zone, programmed total ablation diameter, and duration of microkeratome suction. All surgery was performed using the same Alcon LADARVision 4000 excimer laser. The main outcome measures were the mean sensitivity (MS) change in the central 15-degree visual field and the MS change in the 15- to 30-degree visual field. A multivariate analysis of the MS change as a function of preoperative clinical parameters was performed.

RESULTS

There was no significant change in the MS in the central 15-degree visual field; between 15 and 30 degrees, there was a statistically significant decrease of -0.82 dB +/- 1.40 (SD) (P=.01, 2-tailed t test). The decline in MS was positively correlated with refractive error and corneal thickness; it was negatively correlated with the programmed optical zone diameter.

CONCLUSIONS

Automatic static perimetry can detect decreased sensitivity in the midperipheral visual field after myopic LASIK. It may be a useful quantitative subjective test for measuring the effects of future improvements in surgical technique on vision quality.

Theoretical Elastic Response of the Cornea to Refractive Surgery: Risk Factors for Keratectasia

PURPOSE

To explore the role that mechanical elastic factors may have in post-refractive surgery corneal phenomena, from mild curvature changes to keratectasia.

METHODS

The central cornea near the apex was modeled as an elastic spherical thin shell loaded by the intraocular pressure (IOP). Equations for myopic laser in situ keratomileusis (LASIK) were obtained to estimate shifts and curvature changes of the posterior corneal surface at the apex. The effect of every parameter was studied, identifying potential risk factors for ectasia.

RESULTS

Theoretically, corneal thinning by ablation will produce an elastic deformation of the posterior surface that depends on the corneal parameters (curvature, Young's modulus, Poisson ratio, and thickness), the IOP, and the ablation profile. In particular, a forward shift and an increase in power of the posterior surface was predicted for myopic LASIK, in agreement with previous experimental findings. These changes rise non-linearly with the attempted correction, and are greater for thinner preoperative corneas, higher IOP smaller Young's modulus, and thicker flaps. Corneas with Young's modulus half the average or less, or thickness <500 microm, may present high risk of ectasia, especially for high IOP and thick flaps.

CONCLUSIONS

Some postoperative effects may be explained in part by elasticity. Research efforts are needed to explain other biomechanical behaviors. The accepted criterion of 250 microm residual bed is insufficient for fine patient screening--depending on the individual ocular parameters, it could be more restrictive. Advances in technology are needed to create a preoperative examination including two-dimensional maps of topography, pachymetry, and Young's modulus.

Einjahresergebnisse nach LASEK

PURPOSE

The aim of this study was to assess astigmatism magnitude and axis changes based on the dioptric power matrix in low to moderate levels of myopia and astigmatism treated with LASEK.

PATIENTS AND METHODS

This retrospective analysis included 54 myopic eyes treated with LASEK with a minimum follow-up of 12 months. An epithelial flap was created by 25-45 s of 20% alcohol exposure. The corneal surface was ablated using two different excimer lasers and nomogram adjustment. The flap was repositioned and a bandage applied to the contact lens. Main outcome measures were manifest refraction as calculated with the dioptric power matrix, UCVA, BSVCA, and retreatment rate.

RESULTS

Mean manifest refraction is shown in table 2 (Tabelle 2). UCVAs of 20/20 or better were found in 33% of eyes at 1 week and in more than 53% at 3 months to 1 year. The safety index remained > or =0.98 after postoperative week 4. The efficacy index varied between 0.91 and 0.98 after 1 month.

CONCLUSION

LASEK for correction of low to moderate myopia and astigmatism seems to be a safe, effective, and stable option.

5-year follow-up of LASIK for hyperopia

PURPOSE

To assess the long-term efficacy and stability of LASIK for hyperopia (+0.75 to +7.00 diopters [D]).

DESIGN

Retrospective follow-up study of a previous phase III multicenter clinical trial (unpublished data).

PARTICIPANTS

Patients who had been treated for hyperopia (33 individuals, 47 eyes) attended follow-up 5 years after surgery. The preoperative mean spherical equivalent at the spectacle plane was +3.58 D (range, +0.75 to 7.00 D), and the attempted mean spherical correction at the corneal plane was +3.18 D (range, +1.00 to +6.00 D).

INTERVENTION

Treatments were performed using a Moria LSK One microkeratome and a Summit Technology SVS Apex Plus excimer laser fitted with an Axicon.

MAIN OUTCOME MEASURES

Manifest refraction, uncorrected visual acuity, best spectacle-corrected visual acuity, corneal transparency, complications, and patient satisfaction were recorded.

RESULTS

At 5 years, for treatments between +1.00 to +3.00 D, 71.0% of eyes were within +/-1.00 D of the intended correction, and for treatments between +3.5 to +6.0 D, 37.5% of eyes were within +/-1.00 D of intended correction. From 12 to 54 months after surgery for all patients, there was a hyperopic shift of +0.53 D (range, -0.13 to +3.13 D), with 51.1% of eyes experiencing an increase of +0.50 D or more and 27.7% of eyes showing a hyperopic shift of more than +1.00 D. This hyperopic shift was +0.67 D (range, 0 to +1.125 D) for patients younger than 40 years of age and +0.44 D (range, -1.33 to +1.50 D) for patients between 43 and 55 years of age.

CONCLUSIONS

LASIK was moderately effective for the correction of low degrees of hyperopia. However, there was regression throughout the 5-year follow-up that was greater than would be expected as a result of aging. Long-term stability of hyperopic LASIK refractive corrections, therefore, is uncertain.