Gold nanorods: from synthesis and properties to biological and biomedical applications

Active Individual Nanoresonators Optimized for Lasing and Spasing Operation

Plasmonic nanoresonators consisting of a gold nanorod and a spherical silica core and gold shell, both coated with a gain layer, were optimized to maximize the stimulated emission in the near-field (NF-c-type) and the outcoupling into the far-field (FF-c-type) and to enter into the spasing operation region (NF-c*-type). It was shown that in the case of a moderate dye concentration, the nanorod has more advantages: smaller lasing threshold and larger slope efficiency and larger achieved intensities in the near-field in addition to FF-c-type systems' smaller gain and outflow threshold, earlier dip-to-peak switching in the spectrum and slightly larger far-field outcoupling efficiency. However, the near-field (far-field) bandwidth is smaller for NF-c-type (FF-c-type) core-shell nanoresonators. In the case of a larger dye concentration (NF-c*-type), although the slope efficiency and near-field intensity remain larger for the nanorod, the core-shell nanoresonator is more advantageous, considering the smaller lasing, outflow, absorption and extinction cross-section thresholds and near-field bandwidth as well as the significantly larger internal and external quantum efficiencies. It was also shown that the strong-coupling of time-competing plasmonic modes accompanies the transition from lasing to spasing occurring, when the extinction cross-section crosses zero. As a result of the most efficient enhancement in the forward direction, the most uniform far-field distribution was achieved.

The detection of fipronil residue in egg on layered gold nanorod-graphene oxide-based 3D SERS substrate

Fipronil and its metabolite fipronil sulfone, when found in some food products, such as eggs, have caused major public health concerns. In this study, we used gold nanorods (AuNRs) and graphene oxide (GO) nanocomposites to fabricate a layer-by-layer assembled three dimensional (3D) substrate for toxin detection by surface enhanced Raman scattering (SERS). The 4-layers of GO-AuNR 3D SERS substrate were optimized using rhodamine 6G. The optimized SERS substrate was used to detect fipronil and fipronil sulfone in spiked eggs. The obtained limit of detection was 10^-8 M (∼4.4 ppb), which is below the maximum residue limit in Taiwan of 10 ppb. Egg samples spiked with fipronil (10^-7 and 10^-3 M) and fipronil sulfone (10^-8 and 10^-4 M) were measured and the maximum departure of the measured SERS intensity from the calibrated SERS intensity was ∼14%. Thus, a facile screening method for the detection of fipronil/fipronil sulfone in food-grade eggs by SERS is demonstrated.

Core-Shell-Structured Covalent-Organic Framework as a Nanoagent for Single-Laser-Induced Phototherapy

Imaging-guided phototherapy, including photothermal therapy and photodynamic therapy, has been emerging as a promising avenue for precision cancer treatment. However, the utilization of a single laser to induce combination phototherapy and multiple-model imaging remains a great challenge. Herein, we report, the first of its kind, a covalent-organic framework (COF)-based magnetic core-shell nanocomposite, Fe₃O₄@COF-DhaTph, that is used as a multifunctional nanoagent for cancer theranostics under single 660 nm NIR irradiation. Besides significant photothermal and photodynamic effects, it still permits triple-modal magnetic resonance/photoacoustic/near-infrared thermal (IR) imaging due to its unequaled magnetic and optical performance. We believe that the results obtained herein could obviously promote the application of COF-based multifunctional nanomaterials in cancer theranostics.

Morphologically homogeneous, pH-responsive gold nanoparticles for non-invasive imaging of HeLa cancer

Gold nanoparticles (AuNPs) have been widely used as nanocarriers in drug delivery to improve the efficiency of chemotherapy treatment and enhance early disease detection. The advantages of AuNPs include their excellent biocompatibility, easy modification and functionalization, facile synthesis, low toxicity, and controllable particle size. This study aimed to synthesize a conjugated citraconic anhydride link between morphologically homogeneous AuNPs and doxorubicin (DOX) (DOX-AuNP). The carrier was radiolabeled for tumor diagnosis using positron emission tomography (PET). The systemically designed DOX-AuNP was cleaved at the citraconic anhydride linker site under the mild acidic conditions of a cancer cell, thereby releasing DOX. Subsequently, the AuNPs aggregated via electrostatic attraction. HeLa cancer cells exhibited a high uptake of the radiolabeled DOX-AuNP. Moreover, PET tumor images were obtained using radiolabeled DOX-AuNP in cancer xenograft mouse models. Therefore, DOX-AuNP is expected to provide a valuable insight into the use of radioligands to detect tumors using PET.

A SERS Study of Charge Transfer Process in Au Nanorod-MBA@Cu2O Assemblies: Effect of Length to Diameter Ratio of Au Nanorods

Surface-enhanced Raman scattering (SERS) is a powerful tool in charge transfer (CT) process research. By analyzing the relative intensity of the characteristic bands in the bridging molecules, one can obtain detailed information about the CT between two materials. Herein, we synthesized a series of Au nanorods (NRs) with different length-to-diameter ratios (L/Ds) and used these Au NRs to prepare a series of core-shell structures with the same Cu2O thicknesses to form Au NR-4-mercaptobenzoic acid (MBA)@Cu2O core-shell structures. Surface plasmon resonance (SPR) absorption bands were adjusted by tuning the L/Ds of Au NR cores in these assemblies. SERS spectra of the core-shell structure were obtained under 633 and 785 nm laser excitations, and on the basis of the differences in the relative band strengths of these SERS spectra detected with the as-synthesized assemblies, we calculated the CT degree of the core-shell structure. We explored whether the Cu2O conduction band and valence band position and the SPR absorption band position together affect the CT process in the core-shell structure. In this work, we found that the specific surface area of the Au NRs could influence the CT process in Au NR-MBA@Cu2O core-shell structures, which has rarely been discussed before.

Optimization of gold nanorod arrays for surface enhanced Raman spectroscopy (SERS) detection of atrazine

Recently, there has been increasing concern over the widespread use of the herbicide atrazine which has been reported to have problematic side effects on local ecosystems. This has highlighted the need for rapid and accurate point-of-need assessment tools for analytical determination of herbicides in ground and surface waters. Surface enhanced Raman spectroscopy (SERS) is a sensitive vibrational spectroscopy technique which has recently been employed for the analysis of a variety of analytes in water, ranging from pharmaceuticals to pesticides. In this work, SERS sensors constructed using gold nanorod (AuNR) arrays are optimized and then utilized for the rapid and sensitive detection of atrazine. In this study, the effect of relative humidity on the self-assembly of gold nanorods into arrays was explored, and the SERS performance was assessed using para-aminothiophenol as a SERS probe. Once the SERS performance of the substrates was deemed optimal, the detection of atrazine was highlighted. This work represents the first time that relative humidity has been explored as an optimization strategy for controlled alignment of gold nanorods for SERS analysis of atrazine.

Plasmon mediated spectrally selective and sensitivity-enhanced uncooled near-infrared detector

Here, we present a high performance uncooled near-infrared (NIR) detector comprising of a giga hertz (GHz) solidly mounted resonator (SMR) and gold nanorods (GNRs) arrays. By coupling the localized surface plasmon resonances of GNRs, the resonator system exhibits optimized optical response to vis-NIR region. Both simulation and experiments demonstrate the hybrid GNRs-SMR exhibit significantly enhanced optical responsive sensitivity of NIR, the tunable aspect ratios (AR) of GNRs enable resonator respond sensitively to selected light. Specially, taking advantage of the acoustofluidic effect of SMR, the GNRs can be controllably and precisely modified on the microchip surface in an ultra-short time, which addresses one of the most fundamental challenges in the localized functionalization of micro/nano scale surface. The presented work opens new directions in development of novel miniaturized, tunable NIR detector.

Insight on the Coupling of Plasmonic Nanoparticles from Near-Field Spectra Determined via Discrete Dipole Approximations

Coupling between plasmonic nanoparticles (NPs) in nanoparticle assemblies has been investigated extensively via far-field properties, such as absorption and scattering, but very rarely via near-field properties, and a quantitative investigation of near-field properties should provide great insight into the nature of the coupling. We report a numerical procedure to obtain reliable near-field spectra (Q _NF) around spherical gold nanoparticles (Au NPs) using Discrete Dipole Approximation (DDA). The reliability of the method was tested by comparing Q _NF from DDA calculations with exact results from the Mie theory. We then applied the method to examine Au NPs assembled in dimer, trimer, and up to pentamer in a linear arrangement. For the well-studied dimer system, we show that the Q _NF enhancement, due to coupling in longitudinal mode, is much greater than the enhancement in Q _ext. There is a linear correlation between the Q _NF and Q _ext peak positions, with the Q _NF peak redshifted from the Q _ext peak by an average of approximately 12 nm. In the case of the multimers, Q _NF spectra from individual spheres were not always identical and become dependent on the sphere location. In the longitudinal model, the center sphere has the strongest Q _NF spectra. For the transverse mode, we differentiate two different scenario, transverse-Y where both electric field (E) and light propagation vector (k) are perpendicular the chain axis, and transverse-X where k is parallel to the chain axis. In transverse-Y mode, coupling leads to reduced Q _NF spectra and the center sphere has the lowest Q _NF intensity. In transverse-X mode, there is retardation effect from the front sphere to the back sphere. The Q _NF from the front sphere is stronger than from the back sphere. In addition, due to the phase lag in k-direction, the Q _NF in transverse-X can differ quite significantly from transverse-Y for large particles. All these results could be understood when one considers how electric field from induced dipoles on neighboring NPs add on or subtract from the incident E-field. These results provide new insight into the coupling properties of Au NPs.

Understanding and advancement in gold nanoparticle targeted photothermal therapy of cancer

The present communication summarizes the importance, understanding and advancement in the photothermal therapy of cancer using gold nanoparticles. Photothermal therapy was used earlier as a single line therapy, but using a combination of photothermal therapy with other therapies like immunotherapy, chemotherapy, photodynamic therapy; efficient therapy management can be achieved. As it was discussed in many studies that gold nanoparticles are treated as idyllic photothermal transducers due to their structural dimensions, which enables them to strongly absorb near infrared light. Gold nanoparticles which are mediated for photothermal therapy can warn cancer cells to chemotherapy, regulate genes and immunotherapy by enhancing the cell permeability and intracellular delivery. The necrosis process and apoptosis depend on the power of laser and temperature within the cancerous tissues which are reached during irradiation. Cells death mechanism is also important because the cells which died through the process of necrosis can endorse secondary tumor growth while the cells which died through apoptosis may provoke the immune response to inhibit the development of secondary tumor growth. To decrease the in vivo barriers, gold nanostructures are again modified with targeting ligand and bio-responsive linker. The manuscript summarizes that the use of gold nanoparticles is capable of inhibiting the growth of cancerous cells by using photothermal therapy which has lesser adverse effects compared to other line therapies.

Complex Resonant Scattering Behavior in the Surface Plasmon Resonance Imaging Microscopy of Single Gold Nanorods

Diffraction patterns observed in surface plasmon resonance imaging (SPRI) microscopy measurements of single gold nanorods (AuNRs) exhibit a complex behavior at wavelengths near the longitudinal plasmonic resonance band. SPRI microscopy measurements at 814 nm from AuNRs in three samples with resonance extinction maxima at 670, 816, and 980 nm reveal a variety of diffraction patterns with central peaks that are either positive, negative, or biphasic. A unitless ratio parameter M_R (-1 ≤ M_R ≤ 1) is created to describe the distribution of diffraction patterns. A purely negative (M_R = -1) central peak is observed for 30%, 57%, and 98% of the diffraction patterns in the 670, 816, and 980 nm samples, respectively. These results along with a theoretical modeling of the diffraction patterns with an anisotropic complex scattering coefficient suggests that this behavior only occurs for AuNRs when the laser wavelength used in SPRI experiments is shorter than the AuNR plasmonic resonance maxima, that is, in the anomalous dispersion region.

Effect of the Size and Shape of Ho, Tm:KLu(WO4)2 Nanoparticles on Their Self-Assessed Photothermal Properties

The incorporation of oleic acid and oleylamine, acting as organic surfactant coatings for a novel solvothermal synthesis procedure, resulted in the formation of monoclinic KLu(WO4)2 nanocrystals. The formation of this crystalline phase was confirmed structurally from X-ray powder diffraction patterns and Raman vibrational modes, and thermally by differential thermal analysis. The transmission electron microscopy images confirm the nanodimensional size (~12 nm and ~16 nm for microwave-assisted and conventional autoclave solvothermal synthesis) of the particles and no agglomeration, contrary to the traditional modified sol-gel Pechini methodology. Upon doping with holmium (III) and thulium (III) lanthanide ions, these nanocrystals can generate simultaneously photoluminescence and heat, acting as nanothermometers and as photothermal agents in the third biological window, i.e., self-assessed photothermal agents, upon excitation with 808 nm near infrared, lying in the first biological window. The emissions of these nanocrystals, regardless of the solvothermal synthetic methodology applied to synthesize them, are located at 1.45 μm, 1.8 μm and 1.96 μm, attributed to the 3H4 → 3F4 and 3F4 → 3H6 electronic transition of Tm3+ and 5I7 → 5I8 electronic transition of Ho3+, respectively. The self-assessing properties of these nanocrystals are studied as a function of their size and shape and compared to the ones prepared by the modified sol-gel Pechini methodology, revealing that the small nanocrystals obtained by the hydrothermal methods have the ability to generate heat more efficiently, but their capacity to sense temperature is not as good as that of the nanoparticles prepared by the modified sol-gel Pechnini method, revealing that the synthesis method influences the performance of these self-assessed photothermal agents. The self-assessing ability of these nanocrystals in the third biological window is proven via an ex-vivo experiment, achieving thermal knowledge and heat generation at a maximum penetration depth of 2 mm.

Unravelling the shell growth pathways of Au-Ag core-shell nanoparticles by in situ liquid cell transmission electron microscopy

Controlling the growth, structure and morphology of core-shell nanoparticles (NPs) is significant for catalytic applications and it can be achieved by adding chemical additives to the synthesis reaction mixture. However, achieving precise control over NP synthesis would require a comprehensive understanding of the mechanisms of NP formation under different chemical conditions, which is quite challenging. Here, using in situ liquid cell transmission electron microscopy (TEM), the overgrowth mechanisms of Ag on Au nanobipyramids (NBPs) are studied in AgNO3 aqueous solution with ascorbic acid as the reducing agent. Au-Ag core-shell NPs are formed via two mechanistic modes: (1) atom deposition during which the Ag atoms are deposited directly onto Au NBPs without the addition of poly(vinyl)pyrrolidone (PVP) and (2) nuclei coalescence during which the Ag nanocrystals (NCs) adsorb onto Au NBPs in the presence of PVP. High-resolution imaging reveals the dynamics of the coalescence process of Ag NCs upon addition of PVP. This study helps us to understand the effect of chemical additives during the evolution of a core seed into core-shell NPs with a well-defined composition and shape. It is useful for synthesizing NPs with greater design flexibility and expanding their various technological applications.

Thermo-responsive polymer encapsulated gold nanorods for single continuous wave laser-induced photodynamic/photothermal tumour therapy

Owing to strong and tunable surface plasmon resonance (SPR) effect and good biocompatibility, gold nanoparticles have been suggested to be a versatile platform for a broad range of biomedical applications. In this study, a new nanoplatform of thermo-responsive polymer encapsulated gold nanorods incorporating indocyanine green (ICG) was designed to couple the photothermal properties of gold nanorods (AuNRs) and the photodynamic properties of ICG to enhance the photodynamic/photothermal combination therapy (PDT/PTT). In addition to the significantly increased payload and enhancing photostability of ICG, the polymer shell in the nanoplatform also has thermo-responsive characteristics that can control the release of drugs at tumour sites upon the laser irradiation. On the basis of these improvements, the nanoplatform strongly increased drug aggregation at the tumour site and improved the photothermal/photodynamic therapeutic efficacy. These results suggest that this nanoplatform would be a great potential system for tumour imaging and antitumour therapy.

Plasmonically Modulated Gold Nanostructures for Photothermal Ablation of Bacteria

With the wide utilization of antibiotics, antibiotic-resistant bacteria have been often developed more frequently to cause potential global catastrophic consequences. Emerging photothermal ablation has been attracting extensive research interest for quick/effective eradication of pathogenic bacteria from contaminated surroundings and infected body. In this field, anisotropic gold nanostructures with tunable size/morphologies have been demonstrated to exhibit their outstanding photothermal performance through strong plasmonic absorption of near-infrared (NIR) light, efficient light to heat conversion, and easy surface modification for targeting bacteria. To this end, this review first introduces thermal treatment of infectious diseases followed by photothermal therapy via heat generation on NIR-absorbing gold nanostructures. Then, the usual synthesis and spectral features of diversified gold nanostructures and composites are systematically overviewed with the emphasis on the importance of size, shape, and composition to achieve strong plasmonic absorption in NIR region. Further, the innovated photothermal applications of gold nanostructures are comprehensively demonstrated to combat against bacterial infections, and some constructive suggestions are also discussed to improve photothermal technologies for practical applications.

Laser-induced optothermal response of gold nanoparticles: From a physical viewpoint to cancer treatment application

Gold nanoparticles (GNPs)-based photothermal therapy (PTT) is a promising minimally invasive thermal therapy for the treatment of focal malignancies. Although GNPs-based PTT has been known for over two decades and GNPs possess unique properties as therapeutic agents, the delivery of a safe and effective therapy is still an open question. This review aims at providing relevant and recent information on the usage of GNPs in combination with the laser to treat cancers, pointing out the practical aspects that bear on the therapy outcome. Emphasis is given to the assessment of the GNPs' properties and the physical mechanisms underlying the laser-induced heat generation in GNPs-loaded tissues. The main techniques available for temperature measurement and the current theoretical simulation approaches predicting the therapeutic outcome are reviewed. Topical challenges in delivering safe thermal dosage are also presented with the aim to discuss the state-of-the-art and the future perspective in the field of GNPs-mediated PTT.

Hybrid Graphene-Gold Nanoparticle-based Nucleic Acid Conjugates for Cancer-Specific Multimodal Imaging and Combined Therapeutics

Nanoparticle-based nucleic acid conjugates (NP-NACs) hold great promise for theragnostic (diagnostic and therapeutic) applications. However, several limitations have hindered the realization of their full potential in the clinical treatment of cancer and other diseases. In diagnosis, NP-NACs, combined with conventional optical sensing systems, have been applied for cancer detection in vitro, but low signal-to-noise ratios limit their broad in vivo applications. Meanwhile, the efficiency of NP-NAC-mediated cancer therapies has been limited through the adaptation of alternative pro-survival pathways in cancer cells. The recent emergence of personalized and precision medicine has outlined the importance of both accurate diagnosis and efficient therapeutics in a single platform. As such, we report the controlled assembly of hybrid graphene oxide/gold nanoparticle-based cancer-specific NACs (Au@GO NP-NACs) for multimodal imaging and combined therapeutics. Our developed Au@GO NP-NACs shows excellent surface-enhanced Raman scattering (SERS)-mediated live-cell cancer detection and multimodal synergistic cancer therapy through the use of photothermal, genetic, and chemotherapeutic strategies. Synergistic and selective killing of cancer cells were then demonstrated by using in vitro microfluidic models and nine different cancer cell lines by further incorporating near-infrared photothermal hyperthermia, a Topoisomerase II anti-cancer drug, and cancer targeting peptides. Moreover, with distinctive advantages of the Au@GO NP-NACs for cancer theragnostics, we further demonstrated precision cancer treatment through the detection of cancer cells in vivo using SERS followed by efficient ablation of the tumor. Therefore, our Au@GO NP-NACs could pave a new road for the advanced theragnostics of cancer as well as many other diseases.

Strategies for the functionalisation of gold nanorods to reduce toxicity and aid clinical translation

Gold nanorods (GNRs) show great promise as photothermal therapy agents due to their remarkable ability to convert light into heat. In most cases, gold nanorods are synthesised via a seed-mediated method assisted by surfactants. However, the toxicity of these surfactants, principally cetrimonium ions, has prevented GNRs from being used more widely in vivo. To address this issue, various detoxification and functionalisation approaches have been proposed in recent years to replace or cover surfactant coatings on the gold surface. In this short review, the advantages and limitations of each approach are examined in the context of the recent progress made towards the design of GNRs suitable for use in the body.

αvβ3-Specific Gold Nanoparticles for Fluorescence Imaging of Tumor Angiogenesis

This paper reports on the development of tumor-specific gold nanoparticles (AuNPs) as theranostic tools intended for target accumulation and the detection of tumor angiogenesis via optical imaging (OI) before therapy is performed, being initiated via an external X-ray irradiation source. The AuNPs were decorated with a near-infrared dye, and RGD peptides as the tumor targeting vector for α_vβ₃-integrin, which is overexpressed in tissue with high tumor angiogenesis. The AuNPs were evaluated in an optical imaging setting in vitro and in vivo exhibiting favorable diagnostic properties with regards to tumor cell accumulation, biodistribution, and clearance. Furthermore, the therapeutic properties of the AuNPs were evaluated in vitro on pUC19 DNA and on A431 cells concerning acute and long-term toxicity, indicating that these AuNPs could be useful as radiosensitizers in therapeutic concepts in the future.

An experimental investigation on the influence of various buffer concentrations, osmolytes and gold nanoparticles on lysozyme: Spectroscopic and calorimetric study

Considering importance and several industrial applications of lysozyme, including natural antibiotic and preservative, identifier for the diagnosis of diseases, and extraction purposes, its reversibility and stability studies can be very important. In this paper, the role that buffer and osmolytes concentrations play on the thermodynamic stability of lysozyme denaturation process, that is a new simple and inexpensive method, was evaluated by Nano-DSC III, far- and near-UV CD and fluorescence techniques. In thermal denaturation study, RI and ΔG of protein increased from 25.62% to 58.82% and 48.87 to 63.63 kJ mol^-1 with the increment of buffer and osmolytes concentrations, respectively. These changes showed a significant increase of 129.59% in RI and 28.16% in ΔG. The effect of buffer and osmolytes concentrations on the secondary and tertiary structures of protein was also investigated. The results indicated that increment of buffer and osmolytes concentrations increase rigidity and thermodynamic stability of protein. Also, structure of protein may be changed by its interaction with GNPs. Hence, interaction of lysozyme with GNPs was studied at the buffer and osmolytes concentrations that gives the maximum RI and ΔG, respectively. The results showed that molten globule-like state was formed by lysozyme in the presence of GNPs.

From 0-dimension to 1-dimensions: Au nanocrystals as versatile plasmonic photocatalyst for broadband light induced RAFT polymerization

Gold nanoparticles and nanorods were utilized as the catalyst for photo-induced RAFT polymerization, because of their strong LSPR performance.

Diagnostic and Therapeutic Nanomedicine

Nanotechnology has been widely applied to medical interventions for prevention, diagnostics, and therapeutics of diseases, and the application of nanotechnology for medical purposes, which is called as a term "nanomedicine" has received tremendous attention. In particular, the design and development of nanoparticle for biosensors have received a great deal of attention, since those are most impactful area of clinical translation showing potential breakthrough in early diagnosis of diseases such as cancers and infections. For example, the nanoparticles that have intrinsic unique features such as magnetic responsive characteristics or photoluminescence can be utilized for noninvasive visualization of inner body. Drug delivery that makes use of drug-containing nanoparticles as a carrier is another field of study, in which the particulate form nanomedicine is given by parenteral administration for further systemic targeting to pathological tissues. In addition, encapsulation into nanoparticles gives the opportunity to secure the sensitive therapeutic payloads that are readily degraded or deactivated until reached to the target in biological environments, or to provide sufficient solubilization (e.g., to deliver compounds which have physicochemical properties that strongly limit their aqueous solubility and therefore systemic bioavailability). The nanomedicine is further intended to enhance the targeting index such as increased specificity and reduced false binding, thus improve the diagnostic and therapeutic performances. In this chapter, principles of nanomaterials for medicine will be thoroughly covered with applications for imaging-based diagnostics and therapeutics.

Radiosensitizing and Phototherapeutic Effects of AuNPs are Mediated by Differential Noxa and Bim Gene Expression in MCF-7 Breast Cancer Cell Line

To compare the apoptotic efficiency of AuNPs, ionizing and non-ionizing radiotherapy, phototherapy, and AuNPs-ionizing-radiotherapy), MCF-7 cells were used as a model for luminal B subtypes of breast carcinoma. A mixture of AuNPs [66% of Au-nanospheres (AuNSs) and 34% of Au-nanorods (AuNRs)] was synthesized and characterized by optical spectroscopy, zeta potential, and transmission electron microscopy (TEM). MCF-7 were divided into six groups (triplicates); after each treatment, cell viability was tested by MTT assay and relative gene expression levels of Bim and Noxa proapoptotic markers were assayed by qRT-PCR. A dose-dependent significant reduction in cell viability of MCF-7 was detected by all examined treatment protocols. Lower viability detected at extended exposure (48 hours) to AuNPs ( [Formula: see text]/ml) was mediated by the upregulation of Noxa gene expression. AuNS and AuNR in vitro PTTs were mediated by differential expression of Bim and Noxa while AuNPs mixture had a combined effect on both Bim and Noxa. Cellular recovery was observed two days-post x-rays irradiation at does < 3 Gy. AuNPs showed dose enhancement factor (DEF) > 12 indicating a high radiosensitizing effect that was partially mediated by Noxa. In conclusion, AuNPs combined therapies exert better anti-proliferative effects via differential regulation of Noxa and Bim gene expressions.

Catalytic Hairpin Self-Assembly-Based SERS Sensor Array for the Simultaneous Measurement of Multiple Cancer-Associated miRNAs

The abnormal expression of some miRNAs is often closely related to the development of tumors. Available detection methods or biosensors that can simultaneously quantify multiple miRNAs in a single sample have rarely been reported. Herein, a novel catalytic hairpin self-assembly (CHA)-based surface-enhanced Raman scattering (SERS) sensor array was developed to simultaneously measure multiple miRNAs associated with cancer in one sample. The sensor array with four different sensing units was constructed by immobilizing one of four different hairpin-structured DNA sequence 1 (hp1) onto one of four Au/Ag alloy nanoparticle (AuAgNP)-coated detection wells. When target miRNA is present, the SERS tags, which were prepared by modifying AuAgNPs with a Raman reporter molecule of 4-mercaptobenzonitrile (MPBN) and the related hairpin-structured DNA sequence 2 (hp2), were captured onto the corresponding sensor unit through a repeated specific CHA reaction. This generated many "hot spots" because of interactions between the SERS tags and the AuAgNP layer-coated surface of the sensor, which ultimately produced a strong SERS signal that allowed the detection of target miRNAs with the detection limit of 0.15 pM. Using this SERS sensor array, multiple cancer-associated miRNAs (miR-1246, miR-221, miR-133a, and miR-21) were successfully determined in buffer, serum, and cellular RNA extracts.

Immobilized anticancer agents and metal nanoparticles in a matrix of gellan: achievements and prospects

A review is devoted to recent achievements in development of anticancer drugs based on natural polysaccharide – gellan that possesses coil-helix conformational transition, sol-gel phase transition, thermo- and salt sensitivity. The characteristics of high- and low-acyl gellan are briefly given and the influence of mono- and multivalent metal ions on the gelation efficiency is described. The mucoadhesive properties of gellan and its modified derivatives are briefly considered in the context of application in pharmacy as oral, buccal, nasal, ophthalmologic, vaginal forms. The main attention is paid to anticancer drugs, gold and silver nanoparticles immobilized within gellan matrix by chemical bonds, physical adsorption and chemosorption. The state-of-the art and perspectives of development of plasmonic photothermal therapy of cancer cells that is one of the promising direction of nanomedicine in diagnosis and treatment of oncological diseases are highlighted. It is outlined that the further strategy of development and application of plasmonic photothermal therapy into clinical practice is due to selection of metal nanoparticles with optimal sizes, high concentration, low cytotoxicity and suitable optical characteristics.

Solvent Quality-Mediated Regioselective Modification of Gold Nanorods with Thiol-Terminated Polymers

Modification of nanorods (NRs) with functional polymer ligands is of great significance to enhance their surface chemistry and prompt their applications in many fields (e.g., photothermal therapy, bioimaging, and catalysis). However, the regioselective modification of AuNRs still remains a great challenge. Herein, we introduce a facile yet versatile strategy to achieve the regioselective modification of AuNRs through a solvent quality-mediated strategy. By employing a poor solvent of the original ligand cetyltrimethylammonium bromide (CTAB) as the medium in the modification, polymer ligands would selectively graft onto the two ends of AuNRs, while polymer ligands would graft onto the entire surface when employing a good solvent. This strategy demonstrates good reproducibility and is applicable to both hydrophilic and hydrophobic polymer ligand modifications. Moreover, by combing our strategy with the preoccupation route, the two ends and sidewall of AuNRs modified by two different polymers form an "ABA"-type building block, which can further self-assemble into well-ordered superstructures. Our finding provides a new opportunity for multifunctionalization of NRs.

Emerging theranostic gold nanostructures to combat cancer: Novel probes for Combinatorial Immunotherapy and Photothermal Therapy

The application of gold nanoparticles in immunotherapy has emerged as one of the most effective therapeutic strategy for eradicating cancer by releasing antigens, oligonucleotides, adjuvants, immune-stimulating agents into the body. Gold nanoparticles are found to be a superior choice, for generating attack on oncogenic cells, due to their low toxicity, better target specificity, diagnostic capabilities, and enhanced cellular uptake rate. This review focuses on the efficiency of several functionalized gold nanoparticles of diverse shapes and sizes as delivery vehicles to desired target cells through effective immunotherapy, along with a brief discussion about photothermal therapy.

Influence of Ag@SiO2 with Different Shell Thickness on Photoelectric Properties of Hole-Conductor-Free Perovskite Solar Cells

In this paper, Ag@SiO2 core-shell nanoparticles (NPs) with different shell thicknesses were prepared experimentally and introduced into the photosensitive layer of mesoscopic hole-conductor-free perovskite solar cells (PSCs) based on carbon counter electrodes. By combining simulation and experiments, the influences of different shell thickness Ag@SiO2 core-shell nanoparticles on the photoelectric properties of the PSCs were studied. The results show that, when the shell thickness of 0.1 wt% Ag@SiO2 core-shell nanoparticles is 5 nm, power conversion efficiency is improved from 13.13% to 15.25%, achieving a 16% enhancement. Through the measurement of the relevant parameters of the obtained perovskite film, we found that this gain not only comes from the increase in current density that scholars generally think, but also comes from the improvement of the film quality. Like current gain, this gain is related to the different shell thickness of Ag@SiO2 core-shell nanoparticles. Our research provides a new direction for studying the influence mechanism of Ag@SiO2 core-shell nanoparticles in perovskite solar cells.

Au-Cu@PANI Alloy Core Shells for Aerobic Fibrin Degradation under Visible Light Exposure

Fibrin plays a critical role in wound healing and hemostasis, yet it is also the main case of cardiovascular diseases and thrombosis. Here, we show the unique design of Au-Cu@PANI alloy core-shell rods for fibrin clot degradation. Microscopic (transmission electron microscopy (TEM), scanning transmission electron microscopy-energy-dispersive X-ray (STEM-EDX)) and structural characterizations (powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS)) of the Au-Cu@PANI hybrid material reveal the formation of Au-Cu heterogeneous alloy core rods (aspect ratio = 3.7) with thin Cu₂O and PANI shells that create a positive surface charge (ζ-potential = +22 mV). This architecture is supported by the survey XPS spectrum showing the presence of Cu 2p, N 1s, and C 1s features with binding energies of 934.8, 399.7, and 284.8 eV, respectively. Upon photolysis (λ ≥ 495 or 590 nm), these hybrid composite nanorods provide sufficient excited-state redox potential to generate reactive oxygen species (ROS) for degradation of model fibrin clots within 5-7 h. Detailed scanning electron microscopy (SEM) analysis of the fibrin network shows significant morphology modification including formation of large voids and strand termini, indicating degradation of fibrin protofibril by Au-Cu@PANI. The dye 1,3-diphenylisobenzofuran (DPBF) used to detect the presence of ¹O₂ shows a 27% bleaching of the absorption at λ = 418 nm within 75 min of irradiation of an aqueous Au-Cu@PANI solution in air. Moreover, electron paramagnetic resonance (EPR) spin-trapping experiments reveal a hyperfine-coupled triplet signature at room temperature with intensities 1:1:1: and g-value = 2.0057, characteristic of the reaction between the spin probe 4-Oxo-TEMP and ¹O₂ during irradiation. Controlled ¹O₂ scavenging experiments by NaN₃ show 82% reduction in the spin-trapped EPR signal area. Both DPBF bleaching and EPR spin trapping indicate that in situ generated ¹O₂ is responsible for fibrin strand scission. This unique nanomaterial function via use of ubiquitous oxygen as a reagent could open creative avenues for future in vivo biomedical applications to treat fibrin clot diseases.

Wavelength-Tunable Optical Fiber Localized Surface Plasmon Resonance Biosensor via a Diblock Copolymer-Templated Nanorod Monolayer

Well-dispersed and dense layers of gold nanorods (AuNRs) on optical fibers are shown to regulate the longitudinal peak wavelength and enhance the sensing performances of localized surface plasmon resonance (LSPR) biosensors. A simple self-assembly method relying on a brush-like monolayer of poly(styrene)-b-poly(acrylic acid) (PS-b-PAA) diblock copolymer was used to immobilize AuNRs with various aspect ratios from 2.33 to 4.60 on optical fibers. Both the experimental and simulation results illustrated that the particle aspect ratio, deposition time (related to the coverage of AuNRs), and interparticle gap significantly affected the optical properties of the fiber-based LSPR biosensors. The highest refractive index (RI) sensitivity of the sensor was 753 nm/RIU, while the limit of detection for human IgG was as low as 0.8 nM. Compared with standard nanoparticle deposition methods of polyelectrolytes or alkoxysilanes, the RI sensitivity of the PS-b-PAA dip-coating method was approximately 3-fold better, a consequence of the higher particle coverage and fewer AuNR aggregates. The presented AuNR-based LSPR sensors could regulate the detection range by tuning the aspect ratios of AuNRs. Applicability is demonstrated via quantitative analysis of antigen-antibody interactions, DNA sensing, and surface-enhanced Raman scattering.

Synthesis and Stabilization of Gold Nanoparticles Using Water-Soluble Synthetic and Natural Polymers

Gold nanoparticles (AuNPs) were synthesized and stabilized using the one-pot method and growth seeding, through utilization of synthetic polymers, including poly(N-vinylpyrrolidone) (PVP), poly(ethylene glycol) (PEG), and poly(vinylcaprolactame) (PVCL), as well as natural polysaccharides, including gellan, welan, pectin, and κ-carrageenan. The absorption spectra, average hydrodynamic size, ζ-potential, and morphology of the gold nanoparticles were evaluated based on various factors, such as polymer concentration, molecular mass of polymers, temperature, and storage time. The optimal polymer concentration for stabilization of AuNPs was found to be 4.0 wt % for PVP, 0.5 wt % for gellan, and 0.2 wt % for pectin, welan, and κ-carrageenan. The values of the ζ-potential of polymer-stabilized AuNPs show that their surfaces are negatively charged. Most of the AuNPs are polydisperse particles, though very monodisperse AuNPs were detected in the presence of a 0.5 wt % gellan solution. At a constant polymer concentration of PVP (4 wt %), the average size of the PVP-AuNPs decreased with the decrease of molecular weight, and in the following order: PVP 350 kDa (~25 nm) > PVP 40 kDa (~8 nm) > PVP 10 kDa (~4 nm). The combination of Fourier-transform infrared spectroscopy (FTIR) and Raman spectroscopy revealed that the functional groups of polymers that are responsible for stabilization of AuNPs are lactam ring in PVP, carboxylic groups in gellan and welan, esterified carboxylic groups in pectin, and SO2 groups in κ-carrageenan. Viscometric and proton nuclear magnetic resonance (1H NMR) spectroscopic measurements showed that the temperature-dependent change in the size of AuNPs, and the gradual increase of the intensity of AuNPs at 550 nm in the presence of gellan, is due to the rigid and disordered conformation of gellan that affects the stabilization of AuNPs. The AuNPs synthesized in the presence of water-soluble polymers were stable over a period of 36 days. Preliminary results on the synthesis and characterization of gold nanorods stabilized by polymers are also presented.

Modular and Integrated Systems for Nanoparticle and Microparticle Synthesis-A Review

Nanoparticles (NPs) and microparticles (MPs) have been widely used in different areas of research such as materials science, energy, and biotechnology. On-demand synthesis of NPs and MPs with desired chemical and physical properties is essential for different applications. However, most of the conventional methods for producing NPs/MPs require bulky and expensive equipment, which occupies large space and generally need complex operation with dedicated expertise and labour. These limitations hinder inexperienced researchers to harness the advantages of NPs and MPs in their fields of research. When problems individual researchers accumulate, the overall interdisciplinary innovations for unleashing a wider range of directions are undermined. In recent years, modular and integrated systems are developed for resolving the ongoing dilemma. In this review, we focus on the development of modular and integrated systems that assist the production of NPs and MPs. We categorise these systems into two major groups: systems for the synthesis of (1) NPs and (2) MPs; systems for producing NPs are further divided into two sections based on top-down and bottom-up approaches. The mechanisms of each synthesis method are explained, and the properties of produced NPs/MPs are compared. Finally, we discuss existing challenges and outline the potentials for the development of modular and integrated systems.

Gold Nanorod Assisted Enhanced Plasmonic Detection Scheme of COVID-19 SARS-CoV-2 Spike Protein

The beautiful interplay between light and matter can give rise to many striking physical phenomena, surface plasmon resonance (SPR) being one of them. Plasmonic immunosensors monitor refractive index changes that occur as a result of specific ligand-analyte or antibody-antigen interactions taking place on the sensor surface. The coronavirus disease (COVID-19) pandemic has jeopardized the entire world and has resulted in economic slowdown of most countries. In this work, a model of a sandwich plasmonic biosensor that utilizes gold nanorods (Au NRs) for the detection of COVID-19 SARS-CoV-2 spike protein is presented. Simulation results for different prismatic configurations for the basic Kretschmann layout are presented. It is found that a BK7 glass prism-based SPR sensor has an incremental sensitivity of 111.11 deg RIU-1. Additionally, using Comsol Multiphysics the electric field enhancement observed for various aspect ratios and layouts of Au NRs are discussed in depth.

Graphene Oxide-Coated Gold Nanorods: Synthesis and Applications

The application of gold nanorods (AuNRs) and graphene oxide (GO) has been widely studied due to their unique properties. Although each material has its own challenges, their combination produces an exceptional material for many applications such as sensor, therapeutics, and many others. This review covers the progress made so far in the synthesis and application of GO-coated AuNRs (GO-AuNRs). Initially, it highlights different methods of synthesizing AuNRs and GO followed by two approaches (ex situ and in situ approaches) of coating AuNRs with GO. In addition, the properties of GO-AuNRs composite such as biocompatibility, photothermal profiling, and their various applications, which include photothermal therapy, theranostic, sensor, and other applications of GO-AuNRs are also discussed. The review concludes with challenges associated with GO-AuNRs and future perspectives.

Hyaluronic acid-coated gold nanorods enhancing BMP-2 peptide delivery for chondrogenesis

Bone morphogenic protein-2 (BMP-2) knuckle epitope peptide has been recently discovered and known to activate chondrogenesis. However, the applications of this soluble peptide remain very limited due to rapid diffusion resulting in poor cellular uptake into target cells. We herein designed nanoparticles made from hyaluronic acid functionalized gold nanorods (GNRs) to conjugate with thiolated BMP-2 knuckle epitope peptide via a two-step reaction. Hyaluronic acid was modified to have thiol functional groups to replace the cetyl trimethylammonium bromide ligands on the surface of GNRs. The thiolated peptides were subsequently reacted with hyaluronic acid on the surface on GNRs via a maleimide-hydrazide crosslinker. The conjugation was confirmed by the change of surface charge of GNRs and the plasmon shift. A colorimetric peptide assay suggested more than 69% of the thiolated peptides were conjugated with the hyaluronic acid coated gold nanorods. Moreover, in vitro cell viability showed that BMP-2 conjugated hyaluronic acid functionalized gold nanorods (B2HGR) were cytocompatible and did not cause cytotoxicity to fibroblast cells. The B2HGRs also significantly promote cellular uptake of the BMP-2 peptides in both human mesenchymal stem cells and porcine chondrocytes due to multivalent ligand binding to the BMP receptors on the cell surface resulting in receptor-mediated endocytosis. The enhanced cellular uptake was clearly observed under a confocal microscope resulting in the significant activation of type II collagen gene expression and glucosaminoglycan secretion in those cells. Furthermore, our delivery system is a proof-of-concept of using scaffolds in combination with nanodelivery platform to enhance cartilaginous repair. The peptide loading capacity and the release is not limited by the scaffolds. Therefore, our delivery platform has potential applications for cartilage regeneration in a preclinical and clinical setting in the future.

Synergistic Chemo-Photothermal Antibacterial Effects of Polyelectrolyte-Functionalized Gold Nanomaterials

With the increasing threat of bacterial infection to human health, the development of different antimicrobial agents is essential. Therefore, based on the photothermal conversion properties of gold nanomaterials, the polyelectrolyte (PE)-coated gold nanorods (GNR@PE) and gold nanostars (GNS@PE) are designed and synthesized. Consequently, the chemo-photothermal synergistic antibacterial effect is achieved. GNR@PE effectively eliminates the high toxicity of cetyltrimethylammonium bromide (CTAB), and both GNR@PE and GNS@PE have good biocompatibility and stability. Because of the cation coating, GNR@PE and GNS@PE show high localized surface charge, which causes strong affinity to bacteria and destruction of bacterial cell walls and cell membranes. They have good chemical antibacterial effects, and the chemical antibacterial rates are above 50%. Under the irradiation of an 808 nm laser, for Gram-negative bacteria and Gram-positive bacteria, GNR@PE (50.00 μg/mL) and GNS@PE (55.00 μg/mL) can kill more than 99% of bacteria through chemo-photothermal effects. GNR@PE and GNS@PE can help eliminate inflammation caused by infection and promote wound healing in the mice model and have few side effects on the organs of mice.

Gold Nanorods for LSPR Biosensing: Synthesis, Coating by Silica, and Bioanalytical Applications

Nanoparticles made of coinage metals are well known to display unique optical properties stemming from the localized surface plasmon resonance (LSPR) phenomenon, allowing their use as transducers in various biosensing configurations. While most of the reports initially dealt with spherical gold nanoparticles owing to their ease of synthesis, the interest in gold nanorods (AuNR) as plasmonic biosensors is rising steadily. These anisotropic nanoparticles exhibit, on top of the LSPR band in the blue range common with spherical nanoparticles, a longitudinal LSPR band, in all respects superior, and in particular in terms of sensitivity to the surrounding media and LSPR-biosensing. However, AuNRs synthesis and their further functionalization are less straightforward and require thorough processing. In this paper, we intend to give an up-to-date overview of gold nanorods in LSPR biosensing, starting from a critical review of the recent findings on AuNR synthesis and the main challenges related to it. We further highlight the various strategies set up to coat AuNR with a silica shell of controlled thickness and porosity compatible with LSPR-biosensing. Then, we provide a survey of the methods employed to attach various bioreceptors to AuNR. Finally, the most representative examples of AuNR-based LSPR biosensors are reviewed with a focus put on their analytical performances.

Gold nanotubes: synthesis, properties and biomedical applications

This review (with 106 references) summarizes the latest progress in the synthesis, properties and biomedical applications of gold nanotubes (AuNTs). Following an introduction into the field, a first large section covers two popular AuNTs synthesis methods. The hard template method introduces anodic alumina oxide template (AAO) and track-etched membranes (TeMs), while the sacrificial template method based on galvanic replacement introduces bimetallic, trimetallic AuNTs and AuNT-semiconductor hybrid materials. Then, the factors affecting the morphology of AuNTs are discussed. The next section covers their unique surface plasmon resonance (SPR), surface-enhanced Raman scattering (SERS) and their catalytic properties. This is followed by overviews on the applications of AuNTs in biosensors, protein transportation, photothermal therapy and imaging. Several tables are presented that give an overview on the wealth of synthetic methods, morphology factors and biological application. A concluding section summarizes the current status, addresses current challenges and gives an outlook on potential applications of AuNTs in biochemical detection and drug delivery.Graphical abstract.

DNA Base Pair Stacking Assembly of Anisotropic Nanoparticles for Biosensing and Ordered Assembly

Anisotropic gold nanoparticles have attracted great interest due to their unique physicochemical properties derived from the shape anisotropy. Manipulation of their interfacial interactions, and thereby the assembling behaviors are often requisite in their applications ranging from optical sensing and diagnosis to self-assembly. Recently, the control of interfacial force based on base pair stacking of DNA terminals have offered a new avenue to surface engineering of nanostructures. In this review, we focus on the DNA base stacking-induced assembly of anisotropic gold nanoparticles, such as nanorods and nanotriangles. The fundamental aspects of anisotropic gold nanoparticles are provided, including the mechanism of the anisotropic growth, the properties arising from the anisotropic shape, and the construction of DNA-grafted anisotropic gold nanoparticles. Then, the advanced applications of their functional assemblies in biosensing and ordered assembly are summarized, followed by a comparison with gold nanospheres. Finally, conclusions and the direction of outlooks are given including future challenges and opportunities in this field.

(Gold triangular nanoplate core)@(silver shell) nanostructures as highly sensitive and selective plasmonic nanoprobes for hydrogen sulfide detection

Hydrogen sulfide plays a significant role in living beings, while its abnormal concentration is related to many diseases. Besides, H2S gas is harmful to human beings and the environment. The detection of H2S has therefore attracted much attention in the past several decades. Herein, highly sensitive and selective H2S plasmonic nanoprobes (gold triangular nanoplate core)@(silver shell) (AuTNP@Ag) are reported. By virtue of the high refractive index sensitivity of Au TNPs to the surrounding medium and facile sulfurization of silver by sulfur ions, AuTNP@Ag exhibits great sensitivity to both sulfur ions and H2S gas. The shifts of the plasmon peak are as large as 16 nm for the ventilation of 1 ppm hydrogen sulfide. AuTNP@Ag nanoprobes also exhibit very good sensing linearity at low concentrations of sulfur ions. Moreover, excellent sensing selectivity for sulfur ions is obtained. A type of test gel, which can produce a naked-eye observable color change when exposed to 1-100 ppm hydrogen sulfide gas, is developed using AuTNP@Ag nanoprobes. Owing to the high sensitivity, linearity, and selectivity of the Au TNP@Ag nanoprobes for hydrogen sulfide sensing, this work paves the way for the plasmonic detection of hydrogen sulfide in both biological and environmental applications.

Dual-Plasmonic Gold@Copper Sulfide Core-Shell Nanoparticles: Phase-Selective Synthesis and Multimodal Photothermal and Photocatalytic Behaviors

Although the intriguing plasmonic properties of noble metal nanoparticles originate from the collective oscillations of free electrons in the conduction band, nanoparticles of doped semiconductors may also exhibit metal-like, plasmonic features that are dictated by the resonantly excited free hole oscillations in the valence band. Here, we combine Au, a representative free electron metal, with copper sulfides, a class of plasmonic p-type semiconductors, in a core-shell nanoparticle geometry to construct dual-plasmonic hetero-nanostructures displaying unique multiplex optical characteristics dominated by plasmonic hole oscillations in the semiconductor shells, plasmonic electron oscillations in the metallic cores, and interband electronic transitions from the valence to conduction bands. Through deliberately designed colloidal synthesis, we are able to selectively grow nanoshells comprising copper sulfides of specifically targeted crystalline phases and Cu/S stoichiometries, such as covellite (CuS), digenite (Cu_1.8S), and nonstoichiometric Cu_2-xS, on the surfaces of Au nanoparticle cores. Our synthetic approach enables us not only to finely control the core and shell dimensions but also to systematically adjust the free hole concentrations in the semiconductor shells, which forms the keystone for the fine tuning of multiple optical resonance modes supported by these hybrid hetero-nanostructures. The dual-plasmonic Au@copper sulfide core-shell nanoparticles exhibit unique multimodal photothermal and photocatalytic behaviors upon selective photoexcitations of different optical transitions at their characteristic resonant frequencies, allowing us to quantitatively evaluate and rigorously compare the intrinsic photothermal and photocatalytic efficacies of multiple types of hot charge carriers, all photoexcited in the same hybrid nanoparticles but with distinct photophysical origins, excited-state lifetimes, energy distributions, and transfer pathways.

Near-Infrared Plasmon-Boosted Heat/Oxygen Enrichment for Reversing Rheumatoid Arthritis with Metal/Semiconductor Composites

Rheumatoid arthritis (RA) is an autoimmune disease that often causes progressive joint dysfunction, even disability and death in severe cases. The radical improvement of inflammatory cell infiltration and the resulting disorder in oxygen supply is a novel therapeutic direction for RA. Herein, a near-infrared-absorbing metal/semiconductor composite, polyethylene glycol-modified ceria-shell-coated gold nanorod (Au@CeO₂), is fabricated for topical photothermal/oxygen-enriched combination therapy for RA in a mouse model. Upon laser irradiation, the photothermal conversion of Au@CeO₂ is exponentially enhanced by the localized surface plasma resonance-induced light focusing. The elevated temperature can not only remarkably obliterate hyperproliferative inflammatory cells gathered in diseased joints but also vastly increase the catalase-like activity of ceria to accelerate the decomposition of H₂O₂ to produce much oxygen, which relieves hypoxia. Significantly, RA-induced lesions are improved, and the expression of proinflammatory cytokines and hypoxia-inducible factors is effectively repressed under the cooperation of heat and oxygen. Overall, the core/shell-structured Au@CeO₂ is a promising nanotherapeutic platform that can well realize light-driven heat/oxygen enrichment to completely cure RA from the perspective of pathogenesis.

Magnetic Circular Dichroism in Nanomaterials: New Opportunity in Understanding and Modulation of Excitonic and Plasmonic Resonances

The unique capability of magnetic circular dichroism (MCD) in revealing geometry and electronic information has provided new opportunities in exploring the relationship between structure and magneto-optical properties in nanomaterials with extraordinary optical absorption. Here, the representative studies referring to application of the MCD technique in semiconductor and noble metal nanomaterials are overviewed. MCD is powerful in elucidating the structural information of the excitonic transition in semiconductor nanocrystals, electronic transitions in noble metal nanoclusters, and plasmon resonance in noble metal nanostructures. By virtue of these advantages, the MCD technique shows its unrivalled ability in evaluating the magnetic modulation of excitonic and plasmonic optical activity of nanomaterials with varied chemical composition, geometry, assembly conformation, and coupling effect. Knowledge of the key factors in manipulating magneto-optical properties at the nanoscale acquired with the MCD technique will largely boost the application of semiconductor and noble nanomaterials in the fields of sensing, spintronic, nanophotonics, etc.

A Redox-Responsive, In-Situ Polymerized Polyplatinum(IV)-Coated Gold Nanorod as An Amplifier of Tumor Accumulation for Enhanced Thermo-Chemotherapy

It remains a major challenge to develop an effective therapeutic system based on gold nanorods (GNRs) for cancer therapy. Herein, we developed a redox-responsive, in-situ polymerized polyplatinum(IV)-coated gold nanorod (GNR@polyPt(IV)) with coupling of the near-infrared (NIR)-induced hyperthermal effect and redox-triggered drug release in one therapeutic platform as an amplifier of tumor accumulation through mild hyperthermia for enhanced synergistical thermo-chemotherapy. After in-situ polymerized with 2-methacryloyloxy ethyl phosphorylcholine (MPC) and Pt(IV) complex-based prodrug monomer (PPM) onto the surface of GNRs, the nanosized GNR@polyPt(IV) exhibited the advantages of high drug encapsulation efficiency, triggered drug release, and reduced side effect. As demonstrated by thermal imaging and photoacoustic imaging in vitro and in vivo, this GNR@polyPt(IV) exhibited an excellent NIR-associated hyperthermal effect and outstanding capacity of tumor accumulation. Importantly, under a mild hyperthermia process, the vascular endothelial growth factor (VEGF) and hypoxia-inducible factor-1α (HIF-1α) were upregulation, resulting in angiogenic vessel around the tumor. Combination with accelerated blood flow and angiogenesis by mild hyperthermia, a dramatic increase of drug accumulation in tumor could be realized after systematic administration. As a result, this amplification fashion of tumor accumulation would contribute the GNR@polyPt(IV) to inhibit tumor progression effectively. Such a facile and simple methodology for enhanced therapeutic effect based on GNRs holds great promises for cancer therapy with further development.