Changing the behavior of chromophores from aggregation-caused quenching to aggregation-induced emission: development of highly efficient light emitters in the solid state

Centimeter-Deep NIR-II Fluorescence Imaging with Nontoxic AIE Probes in Nonhuman Primates

Fluorescence probes with aggregation-induced emission (AIE) characteristics are of great importance in biomedical imaging with superior spatial and temporal resolution. However, the lack of toxicity studies and deep tissue imaging in nonhuman primates hinders their clinical translation. Here, we report the blood chemistry and histological analysis in nonhuman primates treated with AIE probes over tenfold of an intravenous dose of clinically used indocyanine green (ICG) during a study period of 36 days to demonstrate AIE probes are nontoxic. Furthermore, through bright and nontoxic AIE probes and fluorescence imaging in the second window (NIR-II, 1,000–1,700 nm), we achieve an unprecedented 1.5-centimeter-deep vascular imaging in nonhuman primates, breaking the current limitation of millimeter-deep NIR-II fluorescence imaging. Our important findings, i.e., nontoxic features of AIE probes and centimeter-deep NIR-II vascular imaging in nonhuman primates, may facilitate successful translation of AIE probes in clinical trials.

Endowing TADF luminophors with AIE properties through adjusting flexible dendrons for highly efficient solution-processed nondoped OLEDs

The amalgamation of thermally activated delayed fluorescence (TADF) and aggregation-induced emission (AIE) properties, termed AIE-TADF, is a promising strategy to design novel robust luminescent materials. Herein, we transform 2,3,4,5,6-penta(9H-carbazol-9-yl)benzonitrile (5CzBN) from an ACQ molecule into an AIEgen by simply decorating the 5CzBN core with alkyl chain-linked spirobifluorene dendrons. By increasing the number of flexible dendrons, these materials can not only show obvious AIE-TADF characteristics and uniform film morphology, but can also exhibit better resistance to isopropyl alcohol, which are beneficial to fully solution-processed OLEDs. Notably, 5CzBN-PSP shows great device efficiency with an external quantum efficiency (EQE), current efficiency and power efficiency of 20.1%, 58.7 cd A-1 and 46.2 lm W-1, respectively and achieved record-breaking efficiency in solution-processed nondoped OLEDs based on AIE emitters. This work demonstrates a general approach to explore new efficient emitters by the marriage of AIE and TADF which could potentially improve their performance in various areas.

Solid-State Emissive Aroyl-S,N-Ketene Acetals with Tunable Aggregation-Induced Emission Characteristics

N-Benzyl aroyl-S,N-ketene acetals can be readily synthesized by condensation of aroyl chlorides and N-benzyl 2-methyl benzothiazolium salts in good to excellent yields, yielding a library of 35 chromophores with bright solid-state emission and aggregation-induced emission characteristics. Varying the substituent from electron-donating to electron-withdrawing enables the tuning of the solid-state emission color from deep blue to red.

Fluorescent Properties of Morin in Aqueous Solution: A Conversion from Aggregation Causing Quenching (ACQ) to Aggregation Induced Emission Enhancement (AIEE) by Polyethyleneimine Assembly

Unlike normal conversion from aggregation caused quenching (ACQ) to aggregation induced emission enhancement (AIEE) by introducing aromatic rotors tuning aggregation modes, in this study, it is achieved through a supramolecular assembly with polymer. Thus, it provides an easy approach for the inhibition of unwanted H-aggregation between luminogens. As a kind of flavonoid, morin has shown great potential in therapeutics. However, its poor solubility and weak emission in aqueous solution greatly limit its bioapplications. When morin is dissolved in aqueous solution, the presence of 30 × 10^-6 m polyethyleneimine (PEI) induces significant emission enhancement and bathochromic shift. Consequently, the quantum yield (QY) of 24.5% is either achieved by assembling with PEI, versus 0.76% of its ACQ state composed of H-aggregation in aqueous solution. Particularly, the in-depth mechanism studies reveal that it is the assembly with PEI that disassociates the H-aggregation in aqueous solution and further restricts the stretching and/or rotation of morin, which eventually reduce the nonradiative decays and enhance the emission. Therefore, the present study reports a unique phenomenon of AIEE effects on morin. Particularly the in-depth investigation on intrinsic mechanisms will highlight and greatly expand the development of more luminogens from traditional Chinese herbals.

Protein-Based Artificial Nanosystems in Cancer Therapy

Proteins, like actors, play different roles in specific applications. In the past decade, significant achievements have been made in protein-engineered biomedicine for cancer therapy. Certain proteins such as human serum albumin, working as carriers for drug/photosensitizer delivery, have entered clinical use due to their long half-life, biocompatibility, biodegradability, and inherent nonimmunogenicity. Proteins with catalytic abilities are promising as adjuvant agents for other therapeutic modalities or as anticancer drugs themselves. These catalytic proteins are usually defined as enzymes with high biological activity and substrate specificity. However, clinical applications of these kinds of proteins remain rare due to protease-induced denaturation and weak cellular permeability. Based on the characteristics of different proteins, tailor-made protein-based nanosystems could make up for their individual deficiencies. Therefore, elaborately designed protein-based nanosystems, where proteins serve as drug carriers, adjuvant agents, or therapeutic drugs to make full use of their intrinsic advantages in cancer therapy, are reviewed. Up-to-date progress on research in the field of protein-based nanomedicine is provided.

Theranostic Nanoparticles with Aggregation-Induced Emission and MRI Contrast Enhancement Characteristics as a Dual-Modal Imaging Platform for Image-Guided Tumor Photodynamic Therapy

Introduction

Advanced tumor-targeted theranostic nanoparticles play a key role in tumor diagnosis and treatment research. In this study, we developed a multifunctional theranostic platform based on an amphiphilic hyaluronan/poly-(N-ε-carbobenzyloxy-L-lysine) derivative (HA-g-PZLL), superparamagnetic iron oxide (SPIO) and aggregation-induced emission (AIE) nanoparticles for tumor-targeted magnetic resonance (MR) and fluorescence (FL) dual-modal image-guided photodynamic therapy (PDT).

Materials and Methods

The amphiphilic hyaluronan acid (HA) derivative HA-g-PZLL was synthesized by grafting hydrophobic poly-(N-ε-carbobenzyloxy-L-lysine) (PZLL) blocks onto hyaluronic acid by a click conjugation reaction. The obtained HA-g-PZLLs self-assembled into nanoparticles in the presence of AIE molecules and SPIO nanoparticles to produce tumor-targeted theranostic nanoparticles (SPIO/AIE@HA-g-PZLLs) with MR/FL dual-modal imaging ability. Cellular uptake of the theranostic nanoparticles was traced by confocal laser scanning microscopy (CLSM), flow cytometry and Prussian blue staining. The intracellular reactive oxygen species (ROS) generation characteristics of the theranostic nanoparticles were evaluated with CLSM and flow cytometry. The effect of PDT was evaluated by cytotoxicity assay. The dual-mode imaging ability of the nanoparticles was evaluated by a real-time near-infrared fluorescence imaging system and magnetic resonance imaging scanning.

Results

The resulting theranostic nanoparticles not only emit red fluorescence for high-quality intracellular tracing but also effectively produce singlet oxygen for photodynamic tumor therapy. In vitro cytotoxicity experiments showed that these theranostic nanoparticles can be efficiently taken up and are mainly present in the cytoplasm of HepG2 cells. After internalization, these theranostic nanoparticles showed serious cytotoxicity to the growth of HepG2 cells after white light irradiation.

Discussion

This work provides a simple method for the preparation of theranostic nanoparticles with AIE characteristics and MR contrast enhancement, and serves as a dual-modal imaging platform for image-guided tumor PDT.

The Fluorescence Property of Zirconium-Based MOFs Adsorbed Sulforhodamine B

Sulforhodamine B (SRB) is widely utilized for cell staining and laser field. But its application is limited by aggregation-caused quenching (ACQ). In this work, we evaluated the use of UiO-66 and UiO-67 of Zr-based metal organic frameworks (Zr-MOFs) as the host to adsorb SRB molecules due to the high stabily and good loading capacity of Zr-MOFs. The fluorescence properties of the compounds were then discussed respectively. Due to the aperture difference between UiO-66 and UiO-67, they showed distinct fluorescence properties after loading SRB. When the concentration reaches 5 ppm, fluorescence quenching begins to occur in SRB@UiO-66, while it occurs in SRB@UiO-67 at 2 ppm. The solution of quenching phenomenon could open new avenues for the extensive use of SRB.

Utilizing Electroplex Emission to Achieve External Quantum Efficiency up to 18.1% in Nondoped Blue OLED

For the first time, electroplex emission is utilized to enhance the performance of nondoped blue organic light-emitting diodes (OLEDs). By decorating the twisted blue-emitting platform and adjusting the electronic structure, three molecules of 3Cz-Ph-CN, 3Cz-mPh-CN, and 3Ph-Cz-CN with a donor-acceptor structure are synthesized and investigated. When external voltage is applied, electroplex emission, which contributes to the emission performance of OLED, can be realized at the interface between the emitting layer and the electron-transporting layer. Accordingly, high external quantum efficiency of 18.1% can be achieved, while the emission wavelength of the device can be controlled in the blue region. Our results provide the possibility to enhance the performance of OLED through electroplex emission, in addition to the generally investigated thermally activated delayed fluorescence (TADF). Excitedly, when 3Ph-Cz-CN is used as host material in orange-emitting phosphorous OLEDs (PO-01 as the dopant), unprecedented high external quantum efficiency of 27.4% can also be achieved.

Substitution effect on luminescent property of thermally activated delayed fluorescence molecule with aggregation induced emission: A QM/MM study

Pure organic molecules with blue emission have attracted much attention due to its important application in organic light emitting diodes (OLEDs), especially for which with aggregation induced emission (AIE) and thermally activated delayed fluorescence (TADF) properties. Theoretical study to reveal the inner luminescent mechanisms can promote its development. In this work, four kinds of molecules with perfluorobiphenyl (PFBP) unit as acceptor, non-substituted and tert-butyl substituted 9,9-dimethyl-9,10-dihydro-acridine (DMAC) unit as donors, are selected and their photophysical properties are studied in detail. The surrounding environment effects in toluene and solid phase are taken into consideration by the polarized continuum model (PCM) and the combined quantum mechanics and molecular mechanics (QM/MM) method respectively. Results show that geometric changes between the first singlet excited state (S₁) and ground state (S₀) are restricted in solid phase with decreased root-mean squared displacement (RMSD). Moreover, the Huang-Rhys factors and reorganization energies we calculated are all decreased in solid phase, which indicates that the non-radiative energy consumption process of S₁ is hindered by enhanced intermolecular interactions in rigid environment, and it brings aggregation induced emission phenomenon. Furthermore, the substitution effect of tert-butyl in donor unit can efficiently decrease the energy gap and increase the spin-orbit coupling (SOC) constant, further promotes the intersystem crossing (ISC) and reverse intersystem crossing (RISC) rates. Meanwhile, molecules with donor-acceptor-donor (D-A-D) configuration have more efficient luminous performance than D-A type molecules due to the enhanced ISC and RISC processes. Thus, tert-butyl substituted D-A-D type molecules have outstanding TADF features. Our investigations provide a theoretical perspective for AIE and TADF mechanisms and propose a design strategy for efficient TADF molecules, which could promote the development of OLEDs.

Co-assembly of HPV capsid proteins and aggregation-induced emission fluorogens for improved cell imaging

In order to improve the cell-imaging ability, and particularly, to extend the bio-application of AIEgen, human papillomavirus (HPV) capsid protein L1 was assembled with the complex of DNA and aggregation-induced emission fluorogen 9,10-distyrylhydrazine (DSAI), where the virus-like particles (VLPs) of HPV encapsulate the complex via electrostatic interaction. The co-assembled nanoparticles, DSAI-DNA@VLPs, showed homogeneous size (∼53 nm), enhanced fluorescence (8 × 2.5-fold), considerable stability (anti-DNase digestion), improved biocompatibility and commendable protection for the DSAI-DNA complex, ensuring virtual brighter imaging in live cells, both for HeLa and normal 293T cell lines.

Room-Temperature Phosphorescence-active Boronate Particles: Characterization and Ratiometric Afterglow-sensing Behavior by Surface Grafting of Rhodamine B

We found that boronate particles (BP), as a self-assembled system prepared by sequential dehydration of benzene-1,4-diboronic acid with pentaerythritol, showed greenish room-temperature phosphorescence (RTP). This emission was observed in both solid and dispersion state in water. To understand the RTP properties, X-ray crystallographic analysis, and density functional theory (DFT) and time-dependent DFT at M06-2X/6-31G(d,p) level were performed using 3,9-dibenzo-2,4,8,10-tetraoxa-3,9-diboraspiro[5.5]undecane (1) as a model compound. Our interest in functionalizing the RTP-active particles led us to graft Rhodamine B onto their surface. The resulting system emitted a dual afterglow via a Förster-type resonance energy transfer process from the BP in the excited triplet state to Rhodamine B acting as an acceptor fluorophore. This emission behavior was used for ratiometric afterglow sensing of water content in THF with a detection limit of 0.28 %, indicating that this study could pave the way for a new strategy for developing color-variable afterglow chemosensors for various analytes.

Facile approach to benzo[d]imidazole-pyrrolo[1,2-a]pyrazine hybrid structures through double cyclodehydration and aromatization and their unique optical properties with blue emission

A modular approach to polycyclic N-fused heteroaromatics is described. Acid-catalyzed reactions of various 1-(2-oxo-2-arylethyl)-1H-pyrrole-2-carbaldehydes with several o-phenylenediamines provided facile access to a number of new benzo[d]imidazole-pyrrolo[1,2-a]pyrazine hybrid structures through double cyclodehydration and aromatization. Optical characterization of the synthesized compounds revealed unique emission properties, with deep blue emission in the aggregated and solid states, and a dramatic substituent effect was observed. Fusion of an additional benzene ring into the benzo[4,5]imidazo[1,2-a]pyrrolo[2,1-c]pyrazine scaffold resulted in a remarkable increase in the intensity of blue fluorescence from the solution along with good cell permeability and negligible phototoxicity, indicating the potential for bioimaging applications.

Microlasers from AIE-Active BODIPY Derivative

Organic microlasers have attracted much attention due to their unique features such as high mechanical flexibility, facile doping of gain materials, high optical quality, simplicity and low-cost fabrication. However, organic gain materials usually suffer from aggregation-caused quenching (ACQ), preventing further advances of organic microlasers. Here, a new type of microlaser from aggregation-induced emission (AIE) material is successfully demonstrated. By introducing a typical noncrystalline AIE material, a high quality microlaser is obtained via a surface tension-induced self-assembly approach. Distinct from conventional organic microlasers, the organic luminescent material used here is initially nonluminescent but can shine after aggregation under optical pumping. Further investigations demonstrate that AIE-based microlasers exhibit advantages to enable much higher doping concentrations, which provides an alternative way to improved lasing performance including dramatically reduced threshold and favorable lasing stability. It is believed that these results could provide a promising way to extend the content of microlasers and open a new avenue to enable applications ranging from chemical sensing to biology.

Effect of Slip-Stack Self-Assembly on Aggregation-Induced Emission and Solid-State Luminescence in 1,3-Diarylpropynones

Co-facial stacking can result in aggregation-caused quenching (ACQ) in conjugated organic luminogens. This study provides an attractive 'slip-stack' self-assembly approach which can eliminate the occurrence of ACQ. The obtained results from steady-state and time-resolved optical studies, along with X-ray diffraction and computational studies demonstrate aggregation-induced emission enhancement (AIEE) of a donor-π-acceptor based 1,3-diarylpropynone, namely 1-(naphthalenyl)-3-(pyren-1-yl)prop-2-yn-1-one (PYNAP). Unlike the monomer, which exhibits poor photoluminescence in solution (φ_f =2 % in ACN), the twisted manifold of PYNAP allows the orientation of the molecules in a slip-stack fashion during the course of aggregation, which not only avoids a direct co-facial arrangement, but also induces augmented rigidity, leading to restricted intramolecular rotation (RIR) and enhanced emission quantum yield (φ_f =5 % in ACN/H₂ O). The aggregation behavior of PYNAP's congener, 1-phenyl-3-(pyren-1-yl)prop-2-yn-1-one (PYPH) reinforces the hypothesis that slip-stack assembly is a useful strategy for AIEE in polycyclic hydrocarbon luminogens.

Pyrenoimidazole-fused phenanthridine derivatives with intense red excimer fluorescence in the solid state

A new series of polycyclic aromatic hydrocarbons (PAHs), namely, various pyrene-fused phenanthridines PyFPs having different substituents were developed as fluorescent emitters for optoelectronic applications.

Self-assembly of imidazolium/benzimidazolium cationic receptors: their environmental and biological applications

This review highlights the applications of imidazolium based cationic receptors for sensing of biomolecules and catalysis.

Synthesis and investigation of the photophysical, electrochemical and theoretical properties of phenazine–amine based cyan blue-red fluorescent materials for organic electronics

We report a study of the effect of modulating the donor system fused with a central phenazine core to understand the tuning of the optoelectrochemical properties in the designed phenazine–amine derivatives.

TPE-containing amphiphilic block copolymers: synthesis and application in the detection of nitroaromatic pollutants

Two AIE block copolymers termed P1 and P2 bearing TPE and PEG-based chains were synthesized with moderate molecular weights and narrow PDIs via RAFT polymerization. Both P1 and P2 can be used in the fluorescence detection of nitroaromatic compounds (NACs) and cell images.

Supramolecular assemblies of glycoclusters with aggregation-induced emission for sensitive phenol detection

Hypercrosslinked AIE-active glycocluster nano aggregates are facilely synthesized as fluorescent probes for the detection of phenols.

Diversified AIE and mechanochromic luminescence based on carbazole derivative decorated dicyanovinyl groups: effects of substitution sites and molecular packing

Two positional isomers exhibited noticeable different luminescence properties, which were mainly attributed to their different molecular packing modes.

Drastically modulating the structure, fluorescence, and functionality of doxorubicin in lipid membrane by interfacial density control

In this work, we report on the observation of a drastic modulation of the fluorescence emission of an anticancer drug, doxorubicin, at the lipid interface during the variation of its molecular density at the interface. The emission efficiency of doxorubicin in the lipid membrane was modulated in the range of less than 10% to above 300% that in the aqueous solution. The corresponding changes in the structure and functionality of doxorubicin on the lipid surface were analyzed with the aid of second harmonic generation and theoretical calculation. It was observed that doxorubicin molecules aggregated on the lipid membrane at a relatively high interfacial density. However, this aggregation may not cause interfacial domain large enough to alter the permeability of the lipid bilayer. At an even higher doxorubicin density, the domain of the aggregated doxorubicin molecules induced a cross-membrane transportation.

A benzoperylene self-assembly complex with turn-on excimer emission for wash-free cell membrane fluorescence imaging

A rational design of a benzoperylene probe BP-3 with positive charge allows for turn-on excimer emission, and wash-free cell membrane imaging. BP-3 possesses excellent chemical, thermal and photo stability. And the Stokes shift of the excimer emission is considerably large (90-100 nm), which very much avoids the background fluorescence interference.

Near-Infrared Microlasers from Self-Assembled Spiropyrane-Based Microsphercial Caps

Near-infrared (NIR) microlasers play a significant role in telecommunication and biomedical tissue imaging. However, it remains a big challenge to realize NIR microlasers because of the difficulty in preparing highly efficient NIR luminescent materials and perfect optical resonators. Here, we propose a molecular design strategy to creatively realize the first spiropyrane (SP)-based NIR microlasers with low threshold from self-assembled microsphercial caps. The tetraphenylethylene (TPE) moiety with a highly twisted conformation provides a large free volume to facilitate the photoisomerization process of SP and enhance NIR emission of merocyanine in the solid state. Moreover, self-assembled TPE-SP microsphercial caps simultaneously serve as gain media and resonant microcavities, providing optical gain and feedback for NIR laser oscillations with a low threshold (3.68 μJ/cm²). These results are beneficial for deeply understanding the SP microstructures-lasing emission characteristic relationship and provide a useful guideline for the rational molecular design of NIR microlasers with special functionalities.

Green Phosphors Based on 9,10-bis((4-((3,7-dimethyloctyl)oxy) phenyl) ethynyl) Anthracene for LED

An anthracene aromatic unit was introduced into the phenylethynyl structure by a rigid acetylene linkage at the C-9 and C-10 positions via Sonogashira coupling reactions, resulting in a planar and straight-backbone molecule (9,10-bis((4-((3,7-dimethyloctyl)oxy) phenyl) ethynyl) anthracene) (BPEA). Thermogravimetric analysis demonstrated the good thermal stability of the BPEA. Photoluminescence analysis showed that a suitable expanded π-conjugation in the BPEA made its excitation band extend into the visible region, and an intense green emission was observed under blue-light excitation. A bright green light-emitting diode with an efficiency of 18.22 lm/w was fabricated by coating the organic phosphor onto a 460 nm-emitting InGaN chip. All the results indicate that BPEA is a useful green-emitting material which is efficiently excited by blue light, and therefore, that it could be applied in many fields without UV radiation.

Pyrenylpyridines: Sky-Blue Emitters for Organic Light-Emitting Diodes

A novel sky-blue-emitting tripyrenylpyridine derivative, 2,4,6-tri(1-pyrenyl)pyridine (2,4,6-TPP), has been synthesized using a Suzuki coupling reaction and compared with three previously reported isomeric dipyrenylpyridine (DPP) analogues (2,4-di(1-pyrenyl)pyridine (2,4-DPP), 2,6-di(1-pyrenyl)pyridine (2,6-DPP), and 3,5-di(1-pyrenyl)pyridine (3,5-DPP)). As revealed by single-crystal X-ray analysis and computational simulations, all compounds possess highly twisted conformations in the solid state with interpyrene torsional angles of 42.3°-57.2°. These solid-state conformations and packing variations of pyrenylpyridines could be correlated to observed variations in physical characteristics such as photo/thermal stability and spectral properties, but showed only marginal influence on electrochemical properties. The novel derivative, 2,4,6-TPP, exhibited the lowest degree of crystallinity as revealed by powder X-ray diffraction analysis and formed amorphous thin films as verified using grazing-incidence wide-angle X-ray scattering. This compound also showed high thermal/photo stability relative to its disubstituted analogues (DPPs). Thus, a nondoped organic light-emitting diode (OLED) prototype was fabricated using 2,4,6-TPP as the emissive layer, which displayed a sky-blue electroluminescence with Commission Internationale de L'Eclairage (CIE) coordinates of (0.18, 0.34). This OLED prototype achieved a maximum external quantum efficiency of 6.0 ± 1.2% at 5 V. The relatively high efficiency for this simple-architecture device reflects a good balance of electron and hole transporting ability of 2,4,6-TPP along with efficient exciton formation in this material and indicates its promise as an emitting material for design of blue OLED devices.

Three Models To Encapsulate Multicomponent Dyes into Nanocrystal Pores: A New Strategy for Generating High-Quality White Light

Highly luminescent metal-organic frameworks (LMOFs) have received great attention for their potential use in energy-efficient general lighting devices such as white-light-emitting diodes (WLEDs); however, achieving strong emission with controllable color, especially high-quality white light, remains a considerable challenge. Herein, we present a new strategy to encapsulate in situ multiple dyes into nanocrystalline ZIF-8 pores to form an efficient dyes@MOF system. Using this strategy, we build three models, namely, multiphase single-shell dye@ZIF-8, single-phase single-shell dyes@ZIF-8, and single-phase multishell dyes@ZIF-8, to systematically and fine-tune the white emission color by varying the components and concentration of encapsulated dyes. The study of these three models demonstrates the importance of the multishell structure, which can effectively reduce the interactions such as Förster resonance energy transfer (FRET) between encapsulated dyes. This energy transfer would otherwise be unavoidable in a single-shell setting, which often reduces the efficiency of white-light emission in the dyes@MOF system. This approach offers a new perspective not only for fine-tuning the emission color within nanoporous dyes@MOFs but also for fabricating MOF nanocrystals that are easily solution-processable. The strategy may also facilitate the development of other types of MOF-guest nanocomposite systems.

A Ratiometric Fluorescent DNA Radar Based on Contrary Response of DNA/Silver Nanoclusters and G-Quadruplex/Crystal Violet

G-quadruplex (G4) exhibits infinite application foreground due to its special properties and critical roles in biological regulation. A DNA radar was first built by assigning the silver nanocluster (AgNC) as the radar transmitter, the middle single strand DNA-bridge connected on the AgNCs as the electromagnetic wave, and the G4/crystal violet complex as the radar antenna. The radar antenna could receive the signal of the target DNA that met the electromagnetic wave and give a location via light-up fluorescence. Here, G4 is chosen as the suitable template to connect potential nanomaterial AgNCs with the G4 binder (crystal violet, CV) since the rich guanine in G4 could not only enhance the fluorescence of AgNCs but also form quartets offering powerful binding sites for the G4 binder. Meanwhile, the hybridization behavior of the middle single strand-bridge produced contrary effects decreasing the fluorescence of AgNCs and increasing the fluorescence of G4/CV, which vests a ratiometric feature in such DNA radar. Additionally, this DNA radar model could realize a cascade of logic circuits, the construction of a 1-to-2 decoder, and the ratiometric detection of target DNA. This system could also be employed for DNA detection in a biological matrix, which could be potentially usable as a unique means for monitoring the pathological process of disease, and lays the foundation for the future treatment of diseases.

Facile preparation of luminescent cellulose nanocrystals with aggregation-induced emission feature through Ce(IV) redox polymerization

Cellulose nanocrystals (CNCs) are a novel type of natural nanomaterials that have attracted tremendous research interest for various applications especially in the biomedical fields owing to their natural origin, biodegradable potential, remarkable biocompatibility and massive reactive hydroxyl groups. In this work, a novel strategy has been developed for fabrication of luminescent CNCs with aggregation-induced emission (AIE) feature for the first time through a facile one-step Ce(IV) redox polymerization for direct surface grafting of AIE dye (PhE) and hydrophilic monomer Poly(ethylene glycol) monomethyl ether acrylate (PEGMA) on CNCs. Various characterization techniques would demonstrate the successful preparation of resultant CNC-PhE-PEGMA with uniform nanoscale size, remarkable fluorescent properties and extremely low cytotoxicity. Furthermore, compared with conventional modification strategy of CNCs, Ce(IV) redox polymerization only need moderate temperature and can operate in aqueous solution utilizing surface hydroxyl groups of CNCs as polymerization activity sites. More importantly, CNC-PhE-PEGMA show desirable fluorescent properties and can be used for cell dyeing, indicating their potential for biomedical applications.