Antigenicity and immunogenicity of collagen

Additive Biomanufacturing with Collagen Inks

Collagen is a natural polymer found abundantly in the extracellular matrix (ECM). It is easily extracted from a variety of sources and exhibits excellent biological properties such as biocompatibility and weak antigenicity. Additionally, different processes allow control of physical and chemical properties such as mechanical stiffness, viscosity and biodegradability. Moreover, various additive biomanufacturing technology has enabled layer-by-layer construction of complex structures to support biological function. Additive biomanufacturing has expanded the use of collagen biomaterial in various regenerative medicine and disease modelling application (e.g., skin, bone and cornea). Currently, regulatory hurdles in translating collagen biomaterials still remain. Additive biomanufacturing may help to overcome such hurdles commercializing collagen biomaterials and fulfill its potential for biomedicine.

Structural characterization and in vitro immunogenicity evaluation of amphibian-derived collagen type II from the cartilage of Chinese Giant Salamander (Andrias davidianus)

Collagen type II (CT-II) has unique biological activities and functions, yet the knowledge on amphibian-derived CT-II is rare. Herein, acid-soluble collagen (ASC) and pepsin-soluble collagen (PSC) were successfully isolated and characterized from the cartilage of Chinese Giant Salamander (CGS). The in vitro immunogenicity of collagen was then evaluated and compared with that of the standard bovine CT-II (SCT-II) by T-lymphocyte cell proliferation activity. Results demonstrated that ASC and PSC were predominantly CT-II along with minor collagen type I and maintained intact triple-helical structure of nature collagen. Compared with SCT-II, higher glycine content (337.80 and 339.93 residues/1000 residues) and lower degree of proline hydroxylation (51.81% and 52.52%) were observed in ASC and PSC. Additionally, PSC showed comparable T _d (63 °C) and higher T _m (109 °C) than SCT-II (64 °C and 103 °C, respectively), indicating its high thermal and structural stability. SEM revealed that the lyophilized ASC and PSC had interconnected porous network structures of collagen-based materials. Moreover, different from SCT-II, both ASC and PSC presented no immunogenicity because they did not cause obvious proliferation of murine T-lymphocyte regardless of the induced concentration of collagen increased from 8 to 417 μg/mL. These data suggested that the amphibian-derived CGS cartilage collagens avoid the immunogenic risk of terrestrial animal collagen, and show high thermal stability and potential advantage in biomedical application.

Tuning the immune reaction to manipulate the cell-mediated degradation of a collagen barrier membrane

In order to elicit a desired barrier function in guided bone regeneration (GBR) or guided tissue regeneration (GTR), a barrier membrane has to maintain its integrity for a certain period of time to guarantee the regeneration of target tissue. Due to the complexity and variety of clinical conditions, the healing time required for tissue regeneration varies from one case to another, which implies the need for tailoring the barrier membranes to diverse conditions via manipulating their degradation property. As a "non-self" biomaterial, a barrier membrane will inevitably trigger host-membrane immune response after implantation, which entails the activation of phagocytic cells. In the degradation process of a barrier membrane, the cell-mediated degradation may play a more vital role than enzymatic and physicochemical dissolution; however, limited studies have been carried out on this topic. In this context, we investigated the cell-mediated degradation and illustrated the possible key cells and mediators for immunomodulation via in vivo and in vitro studies. We discovered that IL-13, a key cytokine mainly released by T helper 2 cells (Th2), induced the formation of foreign body giant cells (FBGCs), thus resulting in membrane degradation. Neutralizing IL-13 could suppress membrane degradation and formation of FBGC. The contributions of this study are (1) unveiling the immune mechanisms underlying the cell-mediated collagen membrane degradation; (2) allowing the formation of an "immunodegradation" strategy to develop an "immune-smart" barrier membrane to manipulate its degradation; (3) providing the key regulatory immune cells and cytokines for the immunomodulation target in collagen membrane degradation. STATEMENT OF SIGNIFICANCE: The significance of this research includes.

Self-healing injectable gelatin hydrogels for localized therapeutic cell delivery

Self-healing injectable hydrogel biomaterials uniquely enable precise therapeutic deposition and deployment at specific bodily locations through versatile and minimally invasive processes that can preserve cargo integrity and cell viability. Despite the distinct advantages that injectable hydrogels offer in tissue engineering and therapeutic delivery, exceptionally few have been created using components naturally present in the cellular niche. In this work, we introduce a shear-thinning hydrogel based on guest-host complexation of gelatin. As a biocompatible, biodegradable, and nonimmunogenic biopolymer derived from the most abundant extracellular matrix protein (collagen), gelatin offers great utility as the structural component of biomaterials. Taking advantage of reversible guest-host interactions between β-cyclodextrin (CD) and adamantane (AD) on modified gelatins, we report the first strategy to afford a self-healing material based solely on a functionalized extracellular matrix protein. By varying the initial material formulation, hydrogels were synthesized with variable moduli and shear-thinability across a broad range. Gels were demonstrated to exhibit shear-thinning and self-healing properties, supporting protection of clinically relevant stem-cell-derived cardiomyocytes during injection. These materials are expected to expand clinical opportunities in cell delivery for in vivo tissue regeneration.

Collagen as Bioink for Bioprinting: A Comprehensive Review

Biomaterials made using collagen are successfully used as a three-dimensional (3D) substrate for cell culture and considered to be promising scaffolds for creating artificial tissues. An important task that arises for engineering such materials is the simulation of physical and morphological properties of tissues, which must be restored or replaced. Modern additive technologies, including 3D bioprinting, can be applied to successfully solve this task. This review provides the latest evidence on advances of 3D bioprinting with collagen in the field of tissue engineering. It contains modern approaches for printing pure collagen bioinks consisting only of collagen and cells, as well as the obtained results from the use of pure collagen bioinks in different fields of tissue engineering.

Design and biofabrication of dermal regeneration scaffolds: role of oligomeric collagen fibril density and architecture

Aim: To evaluate dermal regeneration scaffolds custom-fabricated from fibril-forming oligomeric collagen where the total content and spatial gradient of collagen fibrils was specified. Materials & methods: Microstructural and mechanical features were verified by electron microscopy and tensile testing. The ability of dermal scaffolds to induce regeneration of rat full-thickness skin wounds was determined and compared with no fill control, autograft skin and a commercial collagen dressing. Results: Increasing fibril content of oligomer scaffolds inhibited wound contraction and decreased myofibroblast marker expression. Cellular and vascular infiltration of scaffolds over the 14-day period varied with the graded density and orientation of fibrils. Conclusion: Fibril content, spatial gradient and orientation are important collagen scaffold design considerations for promoting vascularization and dermal regeneration while reducing wound contraction.

Comprehensive Assessment of Nile Tilapia Skin (Oreochromis niloticus) Collagen Hydrogels for Wound Dressings

Collagen plays an important role in the formation of extracellular matrix (ECM) and development/migration of cells and tissues. Here we report the preparation of collagen and collagen hydrogel from the skin of tilapia and an evaluation of their potential as a wound dressing for the treatment of refractory wounds. The acid-soluble collagen (ASC) and pepsin-soluble collagen (PSC) were extracted and characterized using sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE), differential scanning calorimetry (DSC), circular dichroism (CD) and Fourier transform infrared spectroscopy (FTIR) analysis. Both ASC and PSC belong to type I collagen and have a complete triple helix structure, but PSC shows lower molecular weight and thermal stability, and has the inherent low antigenicity. Therefore, PSC was selected to prepare biomedical hydrogels using its self-aggregating properties. Rheological characterization showed that the mechanical strength of the hydrogels increased as the PSC content increased. Scanning electron microscope (SEM) analysis indicated that hydrogels could form a regular network structure at a suitable PSC content. Cytotoxicity experiments confirmed that hydrogels with different PSC content showed no significant toxicity to fibroblasts. Skin repair experiments and pathological analysis showed that the collagen hydrogels wound dressing could significantly accelerate the healing of deep second-degree burn wounds and the generation of new skin appendages, which can be used for treatment of various refractory wounds.

Hierarchically structured hydrogels utilizing multifunctional assembling peptides for 3D cell culture

Approaches for the creation of soft materials, particularly hydrogels, with hierarchical structure are of interest in a variety of applications owing to their unique properties. In the context of tissue mimics, hydrogels with multiscale structures more accurately capture the complexities of tissues within the body (e.g., fibrous collagen-rich microenvironments). However, cytocompatible fabrication of such materials with hierarchical structures and independent control of mechanical and biochemical properties remains challenging and is needed for probing and directing cell-microenvironment interactions for three-dimensional (3D) cell encapsulation and culture applications. To address this, we have designed innovative multifunctional assembling peptides: these unique peptides contain a core block that mimics the structure of collagen for achieving relevant melting temperatures; 'sticky' ends to promote assembly of long fibrils; and a biocompatible reactive handle that is orthogonal to assembly to allow the formation of desired multiscale structures and their subsequent rapid, light-triggered integration within covalently crosslinked synthetic hydrogels. Nano- to micro-fibrils were observed to form in physiologically-relevant aqueous solutions, where both underlying peptide chemical structure and assembly conditions were observed to impact the resulting fibril sizes. These assembled structures were 'locked' into place and integrated as linkers within cell-degradable, bioactive hydrogels formed with photoinitiated thiol-ene 'click' chemistry. Hydrogel compositions were identified for achieving robust mechanical properties like those of soft tissues while also retaining higher ordered structures after photopolymerization. The utility of these innovative materials for 3D cell culture was demonstrated with human mesenchymal stem cells, where cell morphologies reminiscent of responses to assembled native collagen were observed now with a fully synthetic material. Using a bottom-up approach, a new materials platform has been established that combines the advantageous properties of covalent and assembling chemistries for the creation of synthetic hydrogels with controllable nanostructure, mechanical properties, and biochemical content.

Atelocollagen Injection Improves Tendon Integrity in Partial-Thickness Rotator Cuff Tears: A Prospective Comparative Study

Background:

Ongoing controversy surrounds the best treatment modality for partial-thickness rotator cuff tears.

Purpose:

To investigate the effects of atelocollagen injection in patients with small, symptomatic, intratendinous rotator cuff tears.

Study Design:

Randomized controlled trial; Level of evidence, 1.

Methods:

From January 2014 to December 2017, 94 patients who had small, symptomatic, intratendinous rotator cuff tears were enrolled and randomly allocated to 1 of 3 groups: intratendinous injection with 0.5 mL of type I atelocollagen (group 1, n = 32), intratendinous injection with 1 mL of type I atelocollagen (group 2, n = 30), and no injection of type I atelocollagen (group 3, n = 32). American Shoulder and Elbow Surgeons score, Constant Shoulder Score, visual analog scale pain score, and range of motion were evaluated before injection; at 3, 6, and 12 months after injection; and at final follow-up. Magnetic resonance imaging (MRI) was performed at least 6 months after injection to evaluate rotator cuff integrity.

Results:

Demographic data did not differ significantly among the 3 groups before injection (P > .05). The mean follow-up period was 24.7 months. The functional and pain scores in groups 1 and 2 were significantly improved at final follow-up (P < .05). No significant improvement was seen in functional or pain scores at final follow-up in group 3 (P > .05). Groups 1 and 2 had significantly better functional scores compared with group 3 at final follow-up (P < .05). The proportion of patients with a decrease in size of the torn tendon on follow-up MRI at least 6 months after atelocollagen injection was significantly higher in group 1 (28.1%; P = .02) and group 2 (36.7%; P = .003) compared with group 3 (6.3%).

Conclusion:

Atelocollagen injection can improve the functional outcome and integrity of the tendon in intratendinous rotator cuff tears.

Rapid Photoinduced Single Cell Detachment from Gold Nanoparticle-Embedded Collagen Gels with Low Denaturation Temperature

Cell Separation is important in various biomedical fields. We have prepared gold nanoparticle (AuNP)-embedded collagen gels as a visible-light-responsive cell scaffold in which photoinduced single cell detachment occurs through local thermal denaturation of the collagen gel via the photothermal effect of AuNP. Physicochemical properties of collagen materials depend on the origin of the collagen and the presence of telopeptides. In this study, we prepared various AuNP-embedded collagen gels by using different collagen materials with and without the telopeptides to compare their thermal denaturation properties and photoinduced single cell detachment behaviors. Cellmatrix type I-C without telopeptides exhibited a lower denaturation temperature than Cellmatrix type I-A and Atelocell IAC, as examined by Fourier transform infrared (FTIR) spectroscopy, rheological analysis, and sol-gel transition observation. Three-dimensional (3D) laser microscopic imaging revealed that collagen fibers shrank in Cellmatrix type I-A upon heating, but collagen fibers disappeared in Cellmatrix type I-C upon heating. Cells cultured on the Cellmatrix type I-C-based AuNP-embedded collagen gel detached with shorter photoirradiation than on the Cellmatrix type I-A-based AuNP-embedded collagen gel, suggesting that collagen gels without telopeptides are suitable for a photoinduced single cell detachment system.

Natural polypeptides-based electrically conductive biomaterials for tissue engineering

Fabrication of an appropriate scaffold is the key fundamental step required for a successful tissue engineering (TE). The artificial scaffold as extracellular matrix in TE has noticeable role in the fate of cells in terms of their attachment, proliferation, differentiation, orientation and movement. In addition, chemical and electrical stimulations affect various behaviors of cells such as polarity and functionality. Therefore, the fabrication approach and materials used for the preparation of scaffold should be more considered. Various synthetic and natural polymers have been used extensively for the preparation of scaffolds. The electrically conductive polymers (ECPs), moreover, have been used in combination with other polymers to apply electric fields (EF) during TE. In this context, composites of natural polypeptides and ECPs can be taken into account as context for the preparation of suitable scaffolds with superior biological and physicochemical features. In this review, we overviewed the simultaneous usage of natural polypeptides and ECPs for the fabrication of scaffolds in TE.

3D Bioprinting of Tissue Models with Customized Bioinks

The ordered assembly of multicellular structures mimicking native tissues has lately come into prominence for various applications of biomedicine. In this respect, three-dimensional bioprinting (3DP) of cells and other biologics through additive manufacturing techniques has brought the possibility to develop functional in vitro tissue models and perhaps creating de novo transplantable tissues or organs in time. Bioinks, which can be defined as the printable analogues of the extracellular matrix, represent the foremost component of 3DP. In this chapter, we attempt to elaborate the major classes of bioinks which are prevalently being evaluated for the 3DP of a wide range of tissue models.

Temperature-responsive collagen–PNIPAAm conjugate: preparation and fibrillogenesis

A collagen–PNIPAAm conjugate is prepared using the “grafting from” method under mild conditions, and fibrillogenesis was realized by the induction of natural collagen.

Risk factors influencing survival of acellular porcine corneal stroma in infectious keratitis: a prospective clinical study

Background

A worldwide lack of donor corneas demands the bioengineered corneas be developed as an alternative. The primary objective of the current study was to evaluate the efficacy of acellular porcine corneal stroma (APCS) transplantation in various types of infectious keratitis and identify risk factors that may increase APCS graft failure.

Methods

In this prospective interventional study, 39 patients with progressive infectious keratitis underwent therapeutic lamellar keratoplasty using APCS and were followed up for 12 months. Data collected for analysis included preoperative characteristics, visual acuity, graft survival and complications. Graft survival was evaluated by the Kaplan–Meier method and compared with the log-rank test.

Results

The percentage of eyes that had a visual acuity of 20/40 or better increased from 10.3% preoperatively to 51.2% at 12 months postoperatively. Twelve patients (30.8%) experienced graft failure within the follow-up period. The primary reasons given for graft failure was noninfectious graft melting (n = 5), and the other causes included recurrence of primary infection (n = 4) and extensive graft neovascularization (n = 3). No graft rejection was observed during the follow-up period. A higher relative risk (RR) of graft failure was associated with herpetic keratitis (RR = 8.0, P = 0.046) and graft size larger than 8 mm (RR = 6.5, P < 0.001).

Conclusions

APCS transplantation is an alternative treatment option for eyes with medically unresponsive infectious keratitis. Despite the efficacy of therapeutic lamellar keratoplasty with APCS, to achieve a good prognosis, restriction of surgical indications, careful selection of patients and postoperative management must be emphasized.

Trial registration Prospective Study of Deep Anterior Lamellar Keratoplasty Using Acellular Porcine Cornea, NCT03105466. Registered 31 August 2016, ClinicalTrails.gov

Bioresponsive microspheres for on-demand delivery of anti-inflammatory cytokines for articular cartilage repair

Despite innovations in surgical interventions, treatment of cartilage injury in osteoarthritic joints remains a challenge due to concomitant inflammation. Obstructing a single dominant inflammatory cytokine has shown remarkable clinical benefits in rheumatoid arthritis, and similar strategies are being suggested to target inflammatory pathways in osteoarthritis (OA). Here, we describe the utility of gelatin microspheres that are responsive to proteolytic enzymes typically expressed in arthritic flares, resulting in on-demand and spatiotemporally controlled release of anti-inflammatory cytokines for cartilage preservation and repair. These microspheres were designed with a net negative charge to sequester cationic anti-inflammatory cytokines, and the magnitude of the negative charge potential increased with an increase in crosslinking density. Collagenase-mediated degradation of the microspheres was dependent on the concentration of the enzyme. Release of anti-inflammatory cytokines from the loaded microspheres directly correlated with the degradation of the gelatin matrix. Exposure of the IL-4 and IL-13 loaded microspheres reduced the inflammation of chondrocytes up to 80%. Hence, the delivery of these microspheres in an OA joint can attenuate the stimulation of chondrocytes and the resulting secretion of catabolic factors such as proteinases and nitric oxide. The microsphere format also allows for minimally invasive delivery and is less susceptible to mechanically induced drug release. Consequently, bioresponsive microspheres can be an effective tool for cartilage preservation and arthritis treatment.

Does the Use of Injectable Atelocollagen during Arthroscopic Rotator Cuff Repair Improve Clinical and Structural Outcomes?

Background

Since the establishment of biological augmentation to improve the treatment of rotator cuff tears, it is imperative to explore newer techniques to reduce the retear rate and improve long-term shoulder function after rotator cuff repair. This study was undertaken to determine the consequences of a gel-type atelocollagen injection during arthroscopic rotator cuff repair on clinical outcomes, and evaluate its effect on structural integrity.

Methods

Between January 2014 and June 2015, 121 patients with full thickness rotator cuff tears underwent arthroscopic rotator cuff repair. Of these, 61 patients were subjected to arthroscopic rotator cuff repair in combination with an atelocollagen injection (group I), and 60 patients underwent arthroscopic rotator cuff repair alone (group II). The visual analogue scale (VAS) for pain and the Korean Shoulder Society (KSS) scores were evaluated preoperatively and postoperatively. Magnetic resonance imaging (MRI) was performed at 6 months postoperatively, to assess the integrity of the repair.

Results

VAS scores were significantly lower in group I than in group II at 3, 7, and 14 days after surgery. KSS scores showed no significant difference between groups in the 24 months period of follow-up. No significant difference was obtained in the healing rate of the rotator cuff tear at 6 months postoperatively (p=0.529).

Conclusions

Although a gel-type atelocollagen injection results in reduced pain in patients at 2 weeks after surgery, our study does not substantiate the administration of atelocollagen during rotator cuff repair to improve the clinical outcomes and healing of the rotator cuff.

Engineering topography: Effects on corneal cell behavior and integration into corneal tissue engineering

Cell-material interactions are important to tissue engineering. Inspired by the natural topographic structures on the extracellular matrix, a growing number of studies have integrated engineering topography into investigations of cell behavior on biomaterials. Engineering topography has a significant influence on cell behaviors. These cell-topography interactions play an important role in regenerative medicine and tissue engineering. Similarly, cell-topography interactions are important to corneal reconstruction and regeneration. In this review, we primarily summarized the effects of topographic cues on the behaviors of corneal cells, including cell morphology, adhesion, migration, and proliferation. Furthermore, the integration of engineering surface topography into corneal tissue engineering was also discussed.

A tissue-specific, injectable acellular gel for the treatment of chronic vocal fold scarring

Gel-based injectable biomaterials have significant potential for treating vocal fold defects such as scarring. An ideal injectable for vocal fold lamina propria restoration should mimic the microenvironment of the lamina propria to induce scarless wound healing and functional tissue regeneration. Most current synthetic or natural injectable biomaterials do not possess the same level of complex, tissue-specific constituents as the natural vocal fold lamina propria. In this study we present a newly-developed injectable gel fabricated from decellularized bovine vocal fold lamina propria. Blyscan assay and mass spectrometry indicated that the vocal fold-specific gel contained a large amount of sulfated glycosaminoglycans and over 250 proteins. Gene Ontology overrepresentation analysis revealed that the proteins in the gel dominantly promote antifibrotic biological process. In vivo study using a rabbit vocal fold injury model showed that the injectable gel significantly reduced collagen density and decreased tissue contraction of the lamina propria in vocal folds with chronic scarring. Furthermore, this acellular gel only elicited minimal humoral immune response after injection. Our findings suggested that the tissue-specific, injectable extracellular matrix gel could be a promising biomaterial for treating vocal fold scarring, even after the formation of mature scar. STATEMENT OF SIGNIFICANCE: Vocal fold lamina propria scarring remains among the foremost therapeutic challenges in the management of patients with voice disorders. Surgical excision of scar may cause secondary scarring and yield inconsistent results. The present study reports an extracellular matrix-derived biomaterial that demonstrated antifibrotic effect on chronic scarring in vocal fold lamina propria. Its injectability minimizes the invasiveness of the delivery procedure and the degree of mucosal violation. In this work we also describe a new methodology which can more accurately identify proteins from the complex mixture of an acellular extracellular matrix gel by excluding interfering peptides produced during the enzymatic digestion in gel fabrication.

The effect of different cross-linking conditions of EDC/NHS on type II collagen scaffolds: an in vitro evaluation

The purpose of this paper is to analyze the properties of porcine cartilage type II collagen scaffolds crosslinked with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxy-succinamide (EDC/NHS) under different conditions. The porous EDC/NHS-crosslinked scaffolds were obtained through a two-step freeze-drying process. To determine the optimal crosslinking condition, we used different solvents and various crosslinking temperatures to prepare the scaffolds. Three crosslinking solutions were prepared with different solvents, photographs were taken with a flash in the darkroom, and light transmission was observed. Type II collagen was crosslinked on a horizontal shaker at a speed of 60 r/min according to the above grouping conditions, and then the structural change of the scaffold in each group was observed. To investigate the swelling ratio and the in vitro degradation of the collagen scaffold, tests were also carried out by immersion of the scaffolds in a PBS solution and digestion in type II collagenase, respectively. The influence of the scaffolds on the proliferation of chondrocytes was assessed by the methyl thiazolyl tetrazolium colorimetric assay. The morphology of the crosslinked scaffolds cocultured with chondrocytes was characterized by a scanning electron microscope. The results proved that 75% alcohol and a crosslinking temperature of 37 °C are recommended. Collagen fibrils are more densely packed after crosslinking with EDC/NHS and have a more uniform structure than that of noncrosslinked ones. The EDC-crosslinked scaffolds possessed excellent mechanical property and biocompatibility.

Alfalfa Nanofibers for Dermal Wound Healing

Engineering bioscaffolds for improved cutaneous tissue regeneration remains a healthcare challenge because of the increasing number of patients suffering from acute and chronic wounds. To help address this problem, we propose to utilize alfalfa, an ancient medicinal plant that contains antibacterial/oxygenating chlorophylls and bioactive phytoestrogens, as a building block for regenerative wound dressings. Alfalfa carries genistein, which is a major phytoestrogen known to accelerate skin repair. The scaffolds presented herein were built from composite alfalfa and polycaprolactone (PCL) nanofibers with hydrophilic surface and mechanical stiffness that recapitulate the physiological microenvironments of skin. This composite scaffold was engineered to have aligned nanofibrous architecture to accelerate directional cell migration. As a result, alfalfa-based composite nanofibers were found to enhance the cellular proliferation of dermal fibroblasts and epidermal keratinocytes in vitro. Finally, these nanofibers exhibited reproducible regenerative functionality by promoting re-epithelialization and granulation tissue formation in both mouse and human skin, without requiring additional proteins, growth factors, or cells. Overall, these findings demonstrate the potential of alfalfa-based nanofibers as a regenerative platform toward accelerating cutaneous tissue repair.

The significance of collagen dressings in wound management: a review

Clinical experience and research has improved our understanding of wound healing which, in turn, has enabled health professionals to aid wound healing and manufacturers to develop modern wound dressings. The significant role of collagen in wound healing has led to the development of numerous products on the basis of this biological material. The main focus of this review is to provide a critical appraisal of publications about collagen and acellular collagen dressings with a fleece-like or spongy structure. It is intended for clinicians and researchers, and aims to keep them up-to-date in the complex field of interactive, collagen-based wound dressings, including their manufacture, combination possibilities, mechanisms of action, performance in the promotion of wound healing and indications. Despite the small number of clinical studies, the importance of acellular collagen dressings with a fleece- or sponge-like structure is likely to increase in the future. As there is no ideal wound dressing, the knowledge attained is meant to support health professionals in selecting the right product, and pave the way for new applications and clinical studies.

Marine Collagen as A Promising Biomaterial for Biomedical Applications

This review focuses on the expanding role of marine collagen (MC)-based scaffolds for biomedical applications. A scaffold-a three-dimensional (3D) structure fabricated from biomaterials-is a key supporting element for cell attachment, growth, and maintenance in 3D cell culture and tissue engineering. The mechanical and biological properties of the scaffolds influence cell morphology, behavior, and function. MC, collagen derived from marine organisms, offers advantages over mammalian collagen due to its biocompatibility, biodegradability, easy extractability, water solubility, safety, low immunogenicity, and low production costs. In recent years, the use of MC as an increasingly valuable scaffold biomaterial has drawn considerable attention from biomedical researchers. The characteristics, isolation, physical, and biochemical properties of MC are discussed as an understanding of MC in optimizing the subsequent modification and the chemistries behind important tissue engineering applications. The latest technologies behind scaffold processing are assessed and the biomedical applications of MC and MC-based scaffolds, including tissue engineering and regeneration, wound dressing, drug delivery, and therapeutic approach for diseases, especially those associated with metabolic disturbances such as obesity and diabetes, are discussed. Despite all the challenges, MC holds great promise as a biomaterial for developing medical products and therapeutics.

Preparation of low-molecular-weight, collagen hydrolysates (peptides): Current progress, challenges, and future perspectives

Collagen hydrolysates (peptides) derived from food processing byproducts have been used to produce commercially valuable food ingredients due to their potential to trigger certain desirable physiological responses in the body. Low-molecular-weight (LMW) collagen hydrolysates are generally thought to exert better bioactivities than their larger counterparts. However, the preparation of LMW collagen hydrolysates is often impeded by their special structure, cross-linking, and hydroxyproline. This review briefly introduces the motivation of the food industry to prepare LMW collagen hydrolysate from food processing byproducts. We further summarize recent progress on the preparation of LMW collagen hydrolysates and methods to determine the molecular weight. We then discuss the challenges and then provide perspectives on future directions in preparing LMW collagen hydrolysates.

Collagen-Based Tissue Engineering Strategies for Vascular Medicine

Cardiovascular diseases (CVDs) account for the 31% of total death per year, making them the first cause of death in the world. Atherosclerosis is at the root of the most life-threatening CVDs. Vascular bypass/replacement surgery is the primary therapy for patients with atherosclerosis. The use of polymeric grafts for this application is still burdened by high-rate failure, mostly caused by thrombosis and neointima hyperplasia at the implantation site. As a solution for these problems, the fast re-establishment of a functional endothelial cell (EC) layer has been proposed, representing a strategy of crucial importance to reduce these adverse outcomes. Implant modifications using molecules and growth factors with the aim of speeding up the re-endothelialization process has been proposed over the last years. Collagen, by virtue of several favorable properties, has been widely studied for its application in vascular graft enrichment, mainly as a coating for vascular graft luminal surface and as a drug delivery system for the release of pro-endothelialization factors. Collagen coatings provide receptor-ligand binding sites for ECs on the graft surface and, at the same time, act as biological sealants, effectively reducing graft porosity. The development of collagen-based drug delivery systems, in which small-molecule and protein-based drugs are immobilized within a collagen scaffold in order to control their release for biomedical applications, has been widely explored. These systems help in protecting the biological activity of the loaded molecules while slowing their diffusion from collagen scaffolds, providing optimal effects on the targeted vascular cells. Moreover, collagen-based vascular tissue engineering substitutes, despite not showing yet optimal mechanical properties for their use in the therapy, have shown a high potential as physiologically relevant models for the study of cardiovascular therapeutic drugs and diseases. In this review, the current state of the art about the use of collagen-based strategies, mainly as a coating material for the functionalization of vascular graft luminal surface, as a drug delivery system for the release of pro-endothelialization factors, and as physiologically relevant in vitro vascular models, and the future trend in this field of research will be presented and discussed.

Extemporaneous Preparation of Injectable and Enzymatically Degradable 3D Cell Culture Matrices from an Animal-Component-Free Recombinant Protein Based on Human Collagen Type I

Injectable hydrogels are considered important to realize safe and effective minimally invasive therapy. Although animal-derived natural polymers are well studied, they typically lack injectability and fail to eliminate the potential risks of immunogenic reactions or unknown pathogen contamination. Despite extensive research activities to explore ideal injectable hydrogels, such state-of-the-art technology remains inaccessible to non-specialists. In this article, the design of a new injectable hydrogel platform that can be extemporaneously prepared from commercially available animal-component-free materials is described. The hydrogels can be prepared simply by mixing mutually reactive aqueous solutions without necessitating specialized knowledge or equipment. Their solidification time can be adjusted by choosing proper buffer conditions from immediate to an extended period of time, that is, few or several tens of minutes depending on the concentration of polymeric components, which not only provides injectability, but enables 3D encapsulation of cells. Mesenchymal stromal/stem cells can be encapsulated and cultured in the hydrogels at least for 2 weeks by traditional cell culture techniques, and retrieved by collagenase digestion with cell viability of approximately 80%. This hydrogel platform accelerates future cell-related research activities.

Heparin-Modified Collagen Gels for Controlled Release of Pleiotrophin: Potential for Vascular Applications

A fast re-endothelialization, along with the inhibition of neointima hyperplasia, are crucial to reduce the failure of vascular bypass grafts. Implants modifications with molecules capable of speeding up the re-endothelialization process have been proposed over the last years. However, clinical trials of angiogenic factor delivery have been mostly disappointing, underscoring the need to investigate a wider array of angiogenic factors. In this work, a drug release system based on a type I collagen hydrogel has been proposed for the controlled release of Pleiotrophin (PTN), a cytokine known for its pro-angiogenetic effects. Heparin, in virtue of its ability to sequester, protect and release growth factors, has been used to better control the release of PTN. Performances of the PTN drug delivery system on endothelial (ECs) and smooth muscle cells (SMCs) have been investigated. Structural characterization (mechanical tests and immunofluorescent analyses of the collagen fibers) was performed on the gels to assess if heparin caused changes in their mechanical behavior. The release of PTN from the different gel formulations has been analyzed using a PTN-specific ELISA assay. Cell viability was evaluated with the Alamar Blue Cell Viability Assay on cells directly seeded on the gels (direct test) and on cells incubated with supernatant, containing the released PTN, obtained from the gels (indirect test). The effects of the different gels on the migration of both ECs and SMCs have been evaluated using a Transwell migration assay. Hemocompatibility of the gel has been assessed with a clotting/hemolysis test. Structural analyses showed that heparin did not change the structural behavior of the collagen gels. ELISA quantification demonstrated that heparin induced a constant release of PTN over time compared to other conditions. Both direct and indirect viability assays showed an increase in ECs viability while no effects were noted on SMCs. Cell migration results evidenced that the heparin/PTN-modified gels significantly increased ECs migration and decreased the SMCs one. Finally, heparin significantly increased the hemocompatibility of the collagen gels. In conclusion, the PTN-heparin-modified collagen here proposed can represent an added value for vascular medicine, able to ameliorate the biological performance, and integration of vascular grafts.

Engineering human ventricular heart tissue based on macroporous iron oxide scaffolds

Myocardial infarction (MI) is a primary cardiovascular disease threatening human health and quality of life worldwide. The development of engineered heart tissues (EHTs) as a transplantable artificial myocardium provides a promising therapy for MI. Since most MIs occur at the ventricle, engineering ventricular-specific myocardium is therefore more desirable for future applications. Here, by combining a new macroporous 3D iron oxide scaffold (IOS) with a fixed ratio of human pluripotent stem cell (hPSC)-derived ventricular-specific cardiomyocytes and human umbilical cord-derived mesenchymal stem cells, we constructed a new type of engineered human ventricular-specific heart tissue (EhVHT). The EhVHT promoted expression of cardiac-specific genes, ion exchange, and exhibited a better Ca²⁺ handling behaviors and normal electrophysiological activity in vitro. Furthermore, when patched on the infarcted area, the EhVHT effectively promoted repair of heart tissues in vivo and facilitated the restoration of damaged heart function of rats with acute MI. Our results show that it is feasible to generate functional human ventricular heart tissue based on hPSC-derived ventricular myocytes for the treatment of ventricular-specific myocardium damage. STATEMENT OF SIGNIFICANCE: We successfully generated highly purified homogenous human ventricular myocytes and developed a method to generate human ventricular-specific heart tissue (EhVHT) based on three-dimensional iron oxide scaffolds. The EhVHT promoted expression of cardiac-specific genes, ion exchange, and exhibited a better Ca²⁺ handling behaviors and normal electrophysiological activity in vitro. Patching the EhVHT on the infarct area significantly improved cardiac function in rat acute MI models. This EhVHT has a great potential to meet the specific requirements for ventricular damages in most MI cases and for screening drugs specifically targeting ventricular myocardium.

Viscoll collagen solution as a novel bioink for direct 3D bioprinting

Collagen is one of the most promising materials for 3D bioprinting because of its distinguished biocompatibility. Cell-laden constructs made of pure collagen with or without incorporated growth supplements support engineered constructs persistence in culture and are perfectly suitable for grafting. The limiting factor for direct 3D collagen printing was poor printability of collagen solutions, especially admixed with cells or tissue spheroids. In our study, we showed that concentrated solutions of native collagen branded Viscoll were effective as bioinks with high fidelity performance. Viscoll containing 20, 30, or 40 mg/ml collagen were used for direct extrusion 3D bioprinting to form scaffolds appropriate to support spatial arrangement of tissue spheroids into rigid patterns with resolution of 0.5 mm in details. Incorporated cells demonstrated sufficient viability. Associated rheological study showed that good printability of the collagen solutions correlates with their increased storage modulus value, notably exceeding the loss modulus value. The proper combination of these physical parameters could become technological criteria for manufacturing various collagen bioinks for 3D bioprinting.

Finding an Optimal Corneal Xenograft Using Comparative Analysis of Corneal Matrix Proteins Across Species

Numerous animal species have been proposed as sources of corneal tissue for obtaining decellularized xenografts. The selection of an appropriate animal model must take into consideration the differences in the composition and structure of corneal proteins between humans and other animal species in order to minimize immune response and improve outcome of the xenotransplant. Here, we compared the amino-acid sequences of 16 proteins present in the corneal stromal matrix of 14 different animal species using Basic Local Alignment Search Tool, and calculated a similarity score compared to the respective human sequence. Primary amino acid structures, isoelectric point and grand average of hydropathy (GRAVY) values of the 7 most abundant proteins (i.e. collagen α-1 (I), α-1 (VI), α-2 (I) and α-3 (VI), as well as decorin, lumican, and keratocan) were also extracted and compared to those of human. The pig had the highest similarity score (91.8%). All species showed a lower proline content compared to human. Isoelectric point of pig (7.1) was the closest to the human. Most species have higher GRAVY values compared to human except horse. Our results suggest that porcine cornea has a higher relative suitability for corneal transplantation into humans compared to other studied species.

Insight into the role of grafting density in the self-assembly of acrylic acid-grafted-collagen

Side chain modification of collagen provides an attractive way to enhance their structure and functions, which is highly desirable for the development of promising biomaterials. However, the impact of structural change of side chains on the intrinsic self-assembly property of collagen was always ignored. Here, a series of acrylic acid-grafted-collagen (AA-g-Col) with different grafting density were prepared to explore the impact of side chain structural variation on the self-assembly of collagen. The results showed that excessive grafting density would weaken or even disappear the self-assembly property of AA-g-Col, but only affects the triple helix to a minor extent. Compared to pristine collagen, the mechanical property and cytocompatibility of AA-g-Col based matrices also deteriorated, along with the increase of grafting density. Therefore, this work contributed a new insight into the importance of grafting density for the study of modified collagen, which would be helpful for the design of optimized formulate collagen-based hybrid materials with both additional novel functions and tissue-mimicking fibrillary structures.

The Collagen Suprafamily: From Biosynthesis to Advanced Biomaterial Development

Collagen is the oldest and most abundant extracellular matrix protein that has found many applications in food, cosmetic, pharmaceutical, and biomedical industries. First, an overview of the family of collagens and their respective structures, conformation, and biosynthesis is provided. The advances and shortfalls of various collagen preparations (e.g., mammalian/marine extracted collagen, cell-produced collagens, recombinant collagens, and collagen-like peptides) and crosslinking technologies (e.g., chemical, physical, and biological) are then critically discussed. Subsequently, an array of structural, thermal, mechanical, biochemical, and biological assays is examined, which are developed to analyze and characterize collagenous structures. Lastly, a comprehensive review is provided on how advances in engineering, chemistry, and biology have enabled the development of bioactive, 3D structures (e.g., tissue grafts, biomaterials, cell-assembled tissue equivalents) that closely imitate native supramolecular assemblies and have the capacity to deliver in a localized and sustained manner viable cell populations and/or bioactive/therapeutic molecules. Clearly, collagens have a long history in both evolution and biotechnology and continue to offer both challenges and exciting opportunities in regenerative medicine as nature's biomaterial of choice.

Personalized Hydrogels for Engineering Diverse Fully Autologous Tissue Implants

Despite incremental improvements in the field of tissue engineering, no technology is currently available for producing completely autologous implants where both the cells and the scaffolding material are generated from the patient, and thus do not provoke an immune response that may lead to implant rejection. Here, a new approach is introduced to efficiently engineer any tissue type, which its differentiation cues are known, from one small tissue biopsy. Pieces of omental tissues are extracted from patients and, while the cells are reprogrammed to become induced pluripotent stem cells, the extracellular matrix is processed into an immunologically matching, thermoresponsive hydrogel. Efficient cell differentiation within a large 3D hydrogel is reported, and, as a proof of concept, the generation of functional cardiac, cortical, spinal cord, and adipogenic tissue implants is demonstrated. This versatile bioengineering approach may assist to regenerate any tissue and organ with a minimal risk for immune rejection.

Monomer-Induced Customization of UV-Cured Atelocollagen Hydrogel Networks

The covalent functionalization of type I atelocollagen with either 4-vinylbenzyl or methacrylamide residues is presented as a simple synthetic strategy to achieve customizable, cell-friendly UV-cured hydrogel networks with widespread clinical applicability. Molecular parameters, i.e., the type of monomer, degree of atelocollagen functionalization and UV-curing solution, have been systematically varied and their effect on gelation kinetics, swelling behavior, elastic properties, and enzymatic degradability investigated. UV-cured hydrogel networks deriving from atelocollagen precursors functionalized with equivalent molar content of 4-vinylbenzyl (F 4VBC = 18 ± 1 mol.%) and methacrylamide (F MA = 19 ± 2 mol.%) adducts proved to display remarkably-different swelling ratio (SR = 1963 ± 58-5202 ± 401 wt.%), storage modulus (G' = 17 ± 3-390 ± 99 Pa) and collagenase resistance (μ rel = 18 ± 5-56 ± 5 wt.%), similarly to the case of UV-cured hydrogel networks obtained with the same type of methacrylamide adduct, but varied degree of functionalization (F MA = 19 ± 2 - 88 ± 1 mol.%). UV-induced network formation of 4VBC-functionalized atelocollagen molecules yielded hydrogels with increased stiffness and enzymatic stability, attributed to the molecular rigidity of resulting aromatized crosslinking segment, whilst no toxic response was observed with osteosarcoma G292 cells. Although to a lesser extent, the pH of the UV-curing solution also proved to affect macroscopic hydrogel properties, likely due to the altered organization of atelocollagen molecules during network formation. By leveraging the knowledge gained with classic synthetic networks, this study highlights how the type of monomer can be conveniently exploited to realize customizable atelocollagen hydrogels for personalized medicine, whereby the structure-property relationships can be controlled to meet the requirements of unmet clinical applications.