Stimulation of bone growth following zinc incorporation into biomaterials

Surface thermal oxidation on titanium implants to enhance osteogenic activity and in vivo osseointegration

Thermal oxidation, which serves as a low-cost, effective and relatively simple/facile method, was used to modify a micro-structured titanium surface in ambient atmosphere at 450 °C for different time periods to improve in vitro and in vivo bioactivity. The surface morphology, crystallinity of the surface layers, chemical composition and chemical states were evaluated by field-emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Cell behaviours including cell adhesion, attachment, proliferation, and osteogenic differentiation were observed in vitro study. The ability of the titanium surface to promote osseointegration was evaluated in an in vivo animal model. Surface thermal oxidation on titanium implants maintained the microstructure and, thus, both slightly changed the nanoscale structure of titanium and enhanced the crystallinity of the titanium surface layer. Cells cultured on the three oxidized titanium surfaces grew well and exhibited better osteogenic activity than did the control samples. The in vivo bone-implant contact also showed enhanced osseointegration after several hours of oxidization. This heat-treated titanium enhanced the osteogenic differentiation activity of rBMMSCs and improved osseointegration in vivo, suggesting that surface thermal oxidation could potentially be used in clinical applications to improve bone-implant integration.

A novel 3D bone-mimetic scaffold composed of collagen/MTA/MWCNT modulates cell migration and osteogenesis

AIMS

This study characterized a three-dimensional (3D) biocomposite scaffolds produced using type I collagen, mineral trioxide aggregate (MTA) and multi-walled carbon nanotubes (MWCNT) to be used in bone tissue regeneration.

MAIN METHODS

The scaffolds were analyzed via scanning (SEM) and transmission (TEM) electron microscopy, as well as the viability and migration of osteoblasts and mineralization of the scaffolds.

KEY FINDINGS

SEM and TEM analyses showed that MTA and MWCNT were distributed as both large agglomerates entrapped within the collagen network and as smaller accumulations or individual molecules dispersed throughout the scaffold. Ultrastructural analysis revealed that osteoblastic MC3T3-E1 cells grown in the biocomposite endocytosed MWCNT, which were localized in the cytoplasm and in vesicles. Analysis of cells grown in the 3D scaffolds demonstrated that >95% of the cells remained viable in all tested combinations and concentrations of the biocomposite. MC3T3-E1 osteoblasts migrated into scaffolds formed with concentrations of type I collagen between 1.75 and 3.0mg/mL. Cells displayed increased migration into scaffolds formed with collagen and a range of low to high concentrations of MTA. In contrast, the presence of MWCNT in the biocomposite had a slight negative effect on migration. Collagen gels containing specific concentrations of MTA, or MWCNT, or combinations of MTA/MWCNT, caused an increase in mineralization of scaffolds.

SIGNIFICANCE

Scaffolds composed of defined concentrations of type I collagen, MTA and MWCNT are biocompatible, promote migration and mineralization of osteoblasts, and hence may be useful as bone tissue mimetics.

A strontium-incorporated nanoporous titanium implant surface for rapid osseointegration

Rapid osseointegration of dental implants will shorten the period of treatment and enhance the comfort of patients. Due to the vital role of angiogenesis played during bone development and regeneration, it might be feasible to promote rapid osseointegration by modifying the implant surface to gain a combined angiogenesis/osteogenesis inducing capacity. In this study, a novel coating (MAO-Sr) with strontium-incorporated nanoporous structures on titanium implants was generated via a new micro-arc oxidation, in an attempt to induce angiogenesis and osteogenesis to enhance rapid osseointegration. In vitro, the nanoporous structure significantly enhanced the initial adhesion of canine BMSCs. More importantly, sustained release of strontium ions also displayed a stronger effect on the BMSCs in facilitating their osteogenic differentiation and promoting the angiogenic growth factor secretion to recruit endothelial cells and promote blood vessel formation. Advanced mechanism analyses indicated that MAPK/Erk and PI3K/Akt signaling pathways were involved in these effects of the MAO-Sr coating. Finally, in the canine dental implantation study, the MAO-Sr coating induced faster bone formation within the initial six weeks and the osseointegration effect was comparable to that of the commercially available ITI implants. These results suggest that the MAO-Sr coating has the potential for future use in dental implants.

Silicon-Doped Titanium Dioxide Nanotubes Promoted Bone Formation on Titanium Implants

While titanium (Ti) implants have been extensively used in orthopaedic and dental applications, the intrinsic bioinertness of untreated Ti surface usually results in insufficient osseointegration irrespective of the excellent biocompatibility and mechanical properties of it. In this study, we prepared surface modified Ti substrates in which silicon (Si) was doped into the titanium dioxide (TiO₂) nanotubes on Ti surface using plasma immersion ion implantation (PIII) technology. Compared to TiO₂ nanotubes and Ti alone, Si-doped TiO₂ nanotubes significantly enhanced the expression of genes related to osteogenic differentiation, including Col-I, ALP, Runx2, OCN, and OPN, in mouse pre-osteoblastic MC3T3-E1 cells and deposition of mineral matrix. In vivo, the pull-out mechanical tests after two weeks of implantation in rat femur showed that Si-doped TiO₂ nanotubes improved implant fixation strength by 18% and 54% compared to TiO₂-NT and Ti implants, respectively. Together, findings from this study indicate that Si-doped TiO₂ nanotubes promoted the osteogenic differentiation of osteoblastic cells and improved bone-Ti integration. Therefore, they may have considerable potential for the bioactive surface modification of Ti implants.

Development of novel implants with self-antibacterial performance through in-situ growth of 1D ZnO nanowire

To prevent the attachment of bacteria to implant surfaces, the 1D zinc oxide nanowire-coating has been successfully developed on material surfaces by using a custom-made hydrothermal approach. The chemical nature, surface topography and wettability of spike-like 1D ZnO nanowire-coating are comprehensively investigated. The anti-adhesive and antimicrobial properties of 1D nanowire-coating are tested against Staphylococcus aureus, Pseudomonas aeruginosa and Escherichia coli by using in vitro live/dead staining and scanning electron microscopy. We find that the adhesion of bacteria can be reduced via the special spike-like topography and that the release of Zn(2+) ions can help suppress the growth of attached bacteria. Furthermore, the antimicrobial effect is also evaluated under in vivo conditions by using a rat model infected with bioluminescent S. aureus. The amount of live bacteria in the rat implanted with a nanowire-coated sample is less than that of the control at various time points. Hence, it is believed that the nanowire-coated material is promising for application in orthopaedic implantation after the long-term animal studies have been completed.

Enhanced Osseointegration of Hierarchical Micro/Nanotopographic Titanium Fabricated by Microarc Oxidation and Electrochemical Treatment

Rapid osseointegration is recognized as a critical factor in determining the success rate of orthopedic and dental implants. Microarc oxidation (MAO) fabricated titanium oxide coatings with a porous topography have been proven to be a potent approach to enhance osteogenic capacity. Now we report two kinds of new hierarchical coatings with similar micromorphologies but different nanotopographies (i.e., MAO and MAO-AK coatings), and both coatings significantly promote cell attachment and osteogenic differentiation through mediating the integrin β1 signaling pathway. In this study, titanium with a unique hierarchical micro/nanomorphology surface was fabricated by a novel duplex coating process, that is, the first a titanium oxide layer was coated by MAO, and then the coating was electrochemically reduced in alkaline solution (MAO-AK). A series of in vitro stem cell differentiation and in vivo osseointegration experiments were carried out to evaluate the osteogenic capacity of the resulting coatings. In vitro, the initial adhesion of the canine bone marrow stem cells (BMSCs) seeded on the MAO and MAO-AK coatings was significantly enhanced, and cell proliferation was promoted. In addition, the expression levels of osteogenesis-related genes, osteorix, alkaline phosphates (ALP), osteopontin, and osteocalcin, in the canine BMSCs, were all up-regulated after incubation on these coatings, especially on the MAO-AK coating. Also, the in vitro ALP activity and mineralization capacity of canine BMSC cultured on the MAO-AK group was better than that on the MAO group. Furthermore, 6 weeks after insertion of the titanium implants into canine femurs, both the bone formation speed and the bone-implant contact ratio of the MAO-AK group were significantly higher than those of the MAO group. All these results suggest that this duplex coating process is promising for engineering titanium surfaces to promote osseointegration for dental and orthopedic applications.

Antibacterial activity, osteogenic and angiogenic behaviors of copper-bearing titanium synthesized by PIII&D

Two types of Cu-bearing specimens with or without nanoparticles on Ti surface synthesized by PIII&D showed disparate biological responses.

Osteoinduction and long-term osseointegration promoted by combined effects of nitrogen and manganese elements in high nitrogen nickel-free stainless steel

High nitrogen nickel-free stainless steel promoted osteoinduction and long-term osseointegration of implants by combined effects of N and Mn elements.

Antimicrobial and osteogenic properties of iron-doped titanium

Iron doped modification layer formed on titanium achieved antibacterial effect as well as bioactivity by regulating the production of ROS.

Enhanced osteoblast differentiation and osseointegration of a bio-inspired HA nanorod patterned pore-sealed MgO bilayer coating on magnesium

The osteogenetic capability of Mg was significantly enhanced by a bio-inspired hydroxyapatite (HA) nanorod patterned pore-sealed MgO bilayer coating.

Zn/Ag micro-galvanic couples formed on titanium and osseointegration effects in the presence of S. aureus

Titanium implants possessing simultaneous osseointegration and antibacterial ability are desirable. In this work, three types of Zn/Ag micro-galvanic couples are fabricated on titanium by plasma immersion ion implantation to investigate the osseointegration and antibacterial effects as well as the involved mechanisms. The in vitro findings disclose enhanced proliferation, osteogenic differentiation, and gene expressions of the rat bone mesenchymal stem cells (rBMSCs), as well as good antibacterial ability on all three micro-galvanic couples. Excellent antimicrobial ability is also observed in vivo and the micro-CT and histological results reveal notable osseointegration in vivo despite the presence of bacteria. The Zn/Ag micro-galvanic couple formed on Zn/Ag dual-ion co-implanted titanium shows the best osseointegration as well as good antibacterial properties in vivo obtained from a rabbit tibia model. The difference among the three Zn/Ag micro-galvanic couples can be ascribed to the contact between the Ag NPs and Zn film, which affects the corrosion process. Our results indicate that the biological behavior can be controlled by the corrosion process of the Zn/Ag micro-galvanic couples.

Calcium Plasma Implanted Titanium Surface with Hierarchical Microstructure for Improving the Bone Formation

Introducing hierarchical microstructure and bioactive trace elements simultaneously onto the surface of titanium implant is a very effective way to improve the osseointegration between bone and implant. In this work, hierarchical topography was prepared on Ti surface via acid etching and sandblasting (SLA) to form micropits and microcavities then underwent Ca plasma immersion ion implantation (Ca-PIII) process. The surface wettability and roughness did not change obviously before and after Ca-PIII process. The in vitro evaluations including cell adhesion, activity, alkaline phosphatase (ALP), osteogenic genes (Runx2, OSX, ALP, BSP, Col1a1, OPN, and OC), and protein (BSP, Col1a1, OPN, and OC) expressions revealed that the introduction of Ca ions onto the surface of SLA-treated Ti can promote greater osteoblasts adhesion, spread and proliferation, which in return further accelerated the maturation and mineralization of osteoblasts. More importantly, in vivo evaluations including Micro-CT evaluation, histological observations, push-out test, sequential fluorescent labeling and histological observations verified that Ca-SLA-treated Ti implants could efficiently promote new bone formation in early times. These promising results suggest that Ca-SLA-treated Ti has the potential for future application in orthopedic field.

Enhanced osteointegration on tantalum-implanted polyetheretherketone surface with bone-like elastic modulus

Polyetheretherketone (PEEK) possesses a similar elastic modulus as bones but yet suffers from bio-inertness and poor osteogenesis. In this work, tantalum ions are implanted energetically into PEEK by plasma immersion ion implantation (PIII) to form Ta2O5 nanoparticles in the near surface. Nanoindentation reveals that the surface elastic modulus of the Ta ion implanted PEEK is closer to that of human cortical bones. In vitro cell adhesion, alkaline phosphatase activity, collagen secretion, extracellular matrix mineralization, and real-time PCR analyses disclose enhanced adhesion, proliferation, and osteogenic differentiation of rat bone mesenchymal stem cells (bMSCs) on the Ta-PIII modified PEEK. In vivo evaluation of the cortico-cancellous rat femur model by means of micro-CT, sequential fluorescent labeling, and histological analysis after 8 weeks confirms significantly improved osteointegration. The bone-like elastic modulus and modified surface topography of the Ta-PIII modified PEEK synergistically induce osteogenic differentiation of bMSCs and the surface-modified materials have large potential in dental and orthopedic implants.

Zinc-containing bioactive glasses for bone regeneration, dental and orthopedic applications

Zinc is a vital and beneficial trace element found in the human body. Though found in small proportions, zinc performs a variety of functions in relation to the immune system, cell division, fertility and the body growth and maintenance. In particular, zinc is proven to be a necessary element for the formation, mineralization, development and maintenance of healthy bones. Considering this attractive attributes of zinc, recent research has widely focused on using zinc along with silicate-based bioactive glasses for bone tissue engineering applications. This paper reviews relevant literature discussing the significance of zinc in the human body, along with its ability to enhance antibacterial effects, bioactivity and distinct physical, structural and mechanical properties of bioactive glasses. In this context, even if the present analysis is not meant to be exhaustive and only representative studies are discussed, literature results confirm that it is essential to understand the properties of zinc-containing bioactive glasses with respect to their in vitro biological behavior, possible cytotoxic effects and degradation characteristics to be able to effectively apply these glasses in bone regeneration strategies. Topics attracting increasing research efforts in this field are elaborated in detail in this review, including a summary of the structural, physical, biological and mechanical properties of zinc-containing bioactive glasses. This paper also presents an overview of the various applications in which zinc-containing bioactive glasses are considered for use as bone tissue scaffolds, bone filling granules, bioactive coatings and bone cements, and advances and remaining challenges are highlighted.

pH responding reversible supramolecular self-assembly of water-soluble amino-imidazole-armed perylene diimide dye for biological applications

A water-soluble amino-imidazole-armed perylene diimide dye exhibits reversible supramolecular structure and fluorescence emission conversion upon external pH-stimulation.

Bidirectional regulation of zinc embedded titania nanorods: antibiosis and osteoblastic cell growth

A bifunctional regulation in antibiosis and osteoblastic cell growth is achieved by well-organized TiO₂–Zn nanoarrays.

Advances in the surface modification techniques of bone-related implants for last 10 years

At the time of implanting bone-related implants into human body, a variety of biological responses to the material surface occur with respect to surface chemistry and physical state. The commonly used biomaterials (e.g. titanium and its alloy, Co-Cr alloy, stainless steel, polyetheretherketone, ultra-high molecular weight polyethylene and various calcium phosphates) have many drawbacks such as lack of biocompatibility and improper mechanical properties. As surface modification is very promising technology to overcome such problems, a variety of surface modification techniques have been being investigated. This review paper covers recent advances in surface modification techniques of bone-related materials including physicochemical coating, radiation grafting, plasma surface engineering, ion beam processing and surface patterning techniques. The contents are organized with different types of techniques to applicable materials, and typical examples are also described.

Regulation of the biological functions of osteoblasts and bone formation by Zn-incorporated coating on microrough titanium

To improve the biological performance of titanium implant, a series of Zn-incorporated coatings were fabricated on the microrough titanium (Micro-Ti) via sol-gel method by spin-coating technique. The successful fabrication of the coating was verified by combined techniques of scanning electron microscopy, surface profiler, X-ray diffraction, X-ray photoelectron spectroscopy, and water contact angle measurements. The incorporated zinc existed as ZnO, which released Zn ions in a sustained manner. The Zn-incorporated samples (Ti-Zn0.08, Ti-Zn0.16, and Ti-Zn0.24) efficiently inhibited the adhesion of both Gram-positive (Staphylococcus aureus) and Gram-negative (Pseudomonas aeruginosa) bacteria. The in vitro evaluations including cell activity, alkaline phosphatase (ALP), mineralization, osteogenic genes expressions (Runx2, ALP, OPG, Col I, OPN, and OC), and tartrate-resistant acid phosphatase, confirmed that Ti-Zn0.16 sample was the optimal one to regulate the proliferation or differentiation for both osteoblasts and osteoclasts. More importantly, in vivo evaluations including Micro-CT analysis, push-out test, and histological observations verified that Ti-Zn0.16 implants could efficiently promote new bone formation after implantation for 4 and 12 weeks, respectively. The resulting material thus has potential application in orthopedic field.