Recent advances in synthesis and surface modification of lanthanide-doped upconversion nanoparticles for biomedical applications

Advances in noninvasive functional imaging of bone

The demand for functional imaging in clinical medicine is comprehensive. Although the gold standard for the functional imaging of human bones in clinical settings is still radionuclide-based imaging modalities, nonionizing noninvasive imaging technology in small animals has greatly advanced in recent decades, especially the diffuse optical imaging to which Britton Chance made tremendous contributions. The evolution of imaging probes, instruments, and computation has facilitated exploration in the complicated biomedical research field by allowing longitudinal observation of molecular events in live cells and animals. These research-imaging tools are being used for clinical applications in various specialties, such as oncology, neuroscience, and dermatology. The Bone, a deeply located mineralized tissue, presents a challenge for noninvasive functional imaging in humans. Using nanoparticles (NP) with multiple favorable properties as bioimaging probes has provided orthopedics an opportunity to benefit from these noninvasive bone-imaging techniques. This review highlights the historical evolution of radionuclide-based imaging, computed tomography, positron emission tomography, and magnetic resonance imaging, diffuse optics-enabled in vivo technologies, vibrational spectroscopic imaging, and a greater potential for using NPs for biomedical imaging.

Probing the magnetic and magnetothermal properties of M(ii)–Ln(iii) complexes (where M(ii) = Ni or Zn; Ln(iii) = La or Pr or Gd)

We report the crystal structures of Ni(ii)–Ln(iii) (where Ln = Gd or Pr) complexes and their suitably substituted diamagnetic analogues. Magnetic characterization revealed the nature of the magnetic exchange interactions and the magnetothermal properties.

Down- and up-converting dual-mode YPO4:Yb3+,Tb3+ nanocrystals: synthesis and spectroscopic properties

The dual-mode luminescence of YPO₄ nanocrystals doped with Yb³⁺ and Tb³⁺ ions, based on down- and up-conversion, is reported.

Multifunctional upconversion mesoporous silica nanostructures for dual modal imaging and in vivo drug delivery

Incorporating the agents for magnetic resonance imaging (MRI), optical imaging, and therapy in one nanostructured matrix to construct multifunctional nanomedical platform has attracted great attention for simultaneous diagnostic and therapeutic applications. In this work, a facile methodology is developed to construct a multifunctional anticancer drug nanocarrier by combining the special advantages of upconversion nanoparticles and mesoporous silica. β-NaYF4 :Yb(3+) , Er(3+) @β-NaGdF4 :Yb(3+) is chosen as it can provide the dual modality of upconversion luminescence and MRI. Then mesoporous silica is directly coated onto the upconversion nanoparticles to form discrete, monodisperse, highly uniform, and core-shell structured nanospheres (labeled as UCNPs@mSiO2 ), which are subsequently functionalized with hydrophilic polymer poly(ethylene glycol) (PEG) to improve the colloidal stability and biocompatibility. The obtained multifunctional nanocomposites can be used as an anticancer drug delivery carrier and applied for imaging. The anticancer drug doxorubicin (DOX) is absorbed into UCNPs@mSiO2 -PEG nanospheres and released in a pH-sensitive pattern. In vitro cell cytotoxicity tests on cancer cells verify that the DOX-loaded UCNPs@mSiO2 -PEG has comparable cytotoxicity with free DOX at the same concentration of DOX. In addition, the T1 -weighted MRI that measures in aqueous solutions reveals that the contrast brightening increases with the concentration of Gd(3+) component. Upconversion luminescence images of UCNPs@mSiO2 -PEG uptaken by cells show green emission under 980 nm infrared laser excitation. Finally, the nanocomposites show low systematic toxicity and high in vivo antitumor therapy efficacy. These findings highlight the fascinating features of upconversion-mesoporous nanocomposites as multimodality imaging contrast agents and nanocarrier for drug molecules.

Enhancement of Cerenkov luminescence imaging by dual excitation of Er(3+),Yb(3+)-doped rare-earth microparticles

Cerenkov luminescence imaging (CLI) has been successfully utilized in various fields of preclinical studies; however, CLI is challenging due to its weak luminescent intensity and insufficient penetration capability. Here, we report the design and synthesis of a type of rare-earth microparticles (REMPs), which can be dually excited by Cerenkov luminescence (CL) resulting from the decay of radionuclides to enhance CLI in terms of intensity and penetration.

METHODS

Yb(3+)- and Er(3+)- codoped hexagonal NaYF4 hollow microtubes were synthesized via a hydrothermal route. The phase, morphology, and emission spectrum were confirmed for these REMPs by power X-ray diffraction (XRD), scanning electron microscopy (SEM), and spectrophotometry, respectively. A commercial CCD camera equipped with a series of optical filters was employed to quantify the intensity and spectrum of CLI from radionuclides. The enhancement of penetration was investigated by imaging studies of nylon phantoms and nude mouse pseudotumor models.

RESULTS

the REMPs could be dually excited by CL at the wavelengths of 520 and 980 nm, and the emission peaks overlaid at 660 nm. This strategy approximately doubled the overall detectable intensity of CLI and extended its maximum penetration in nylon phantoms from 5 to 15 mm. The penetration study in living animals yielded similar results.

CONCLUSIONS

this study demonstrated that CL can dually excite REMPs and that the overlaid emissions in the range of 660 nm could significantly enhance the penetration and intensity of CL. The proposed enhanced CLI strategy may have promising applications in the future.

Upconversion nanoparticle-based Förster resonance energy transfer for detecting the IS6110 sequence of Mycobacterium tuberculosis complex in sputum

Upconversion nanoparticles (UCNPs), which are excited at near-infrared wavelength (980 nm), emit high-energy photons. Since UCNPs display a high signal-to-noise ratio and no photobleaching, they are extremely useful for diagnostic application. In this study, we applied UCNPs for detecting the IS6110 sequence of the Mycobacterium tuberculosis complex (MTBC) and evaluated the feasibility of the system for use in molecular diagnostics. Using biotinylated primers, IS6110 DNA PCR was performed and the PCR amplicon was then mixed with streptavidin-conjugated UCNPs, followed by intercalation with SYTOX Orange dye. Fluorescence detection for the Förster resonance energy transfer (FRET) of the UCNPs (UCNP-FRET) was then performed. The estimated lowest detection by UCNP-FRET was 10(2) copies/μL of IS6110 DNA (157 bp). The kappa agreement of the UCNP-FRET assay with conventional PCR was 0.8464 (95% confidence interval, 0.7442-0.9486) and false-negative results were reduced. Our results demonstrated the successful implementation of the UCNP-FRET system in detecting the IS6110 sequence of the MTBC and its potential application for molecular diagnostics.

Recent advances in design and fabrication of upconversion nanoparticles and their safe theranostic applications

Lanthanide (Ln) doped upconversion nanoparticles (UCNPs) have attracted enormous attention in the recent years due to their unique upconversion luminescent properties that enable the conversion of low-energy photons (near infrared photons) into high-energy photons (visible to ultraviolet photons) via the multiphoton processes. This feature makes them ideal for bioimaging applications with attractive advantages such as no autofluorescence from biotissues and a large penetration depth. In addition, by incorporating advanced features, such as specific targeting, multimodality imaging and therapeutic delivery, the application of UCNPs has been dramatically expanded. In this review, we first summarize the recent developments in the fabrication strategies of UCNPs with the desired size, enhanced and tunable upconversion luminescence, as well as the combined multifunctionality. We then discuss the chemical methods applied for UCNPs surface functionalization to make these UCNPs biocompatible and water-soluble, and further highlight some representative examples of using UCNPs for in vivo bioimaging, NIR-triggered drug/gene delivery applications and photodynamic therapy. In the perspectives, we discuss the need of systematically nanotoxicology data for rational designs of UCNPs materials, their surface chemistry in safer biomedical applications. The UCNPs can actually provide an ideal multifunctionalized platform for solutions to many key issues in the front of medical sciences such as theranostics, individualized therapeutics, multimodality medicine, etc.

Advances in the understanding of nanomaterial–biomembrane interactions and their mathematical and numerical modeling

The widespread application of nanomaterials (NMs), which has accompanied advances in nanotechnology, has increased their chances of entering an organism, for example, via the respiratory system, skin absorption or intravenous injection. Although accumulating experimental evidence has indicated the important role of NM–biomembrane interaction in these processes, the underlying mechanisms remain unclear. Computational techniques, as an alternative to experimental efforts, are effective tools to simulate complicated biological behaviors. Computer simulations can investigate NM–biomembrane interactions at the nanoscale, providing fundamental insights into dynamic processes that are challenging to experimental observation. This paper reviews the current understanding of NM–biomembrane interactions, and existing mathematical and numerical modeling methods. We highlight the advantages and limitations of each method, and also discuss the future perspectives in this field. Better understanding of NM–biomembrane interactions can benefit various fields, including nanomedicine and diagnosis.