Implantable applications of chitin and chitosan

Evaluation of amygdalin-loaded alginate-chitosan nanoparticles as biocompatible drug delivery carriers for anticancerous efficacy

Amygdalin, despite possessing anticancerous properties, has been viewed as a controversial choice due to the presence of the cyanide group. Here, we synthesise and investigate the potential of alginate-chitosan nanoparticles (ACNPs) as drug delivery agents for amygdalin encapsulation and its delivery to cancer cells. Amygdalin loaded ACNPs were made with both anionic and cationic outer layer to further investigate charge dependency on drug delivery and cytotoxicity. ACNPs encapsulating amygdalin were monodisperse, colloidally stable with ~90% drug encapsulation efficiency and were entirely made from natural materials. The nanoparticles exhibited sustained drug release for a duration of 10 h and significant swelling rates in neutral and slightly acidic environments. The ACNPs successfully adhered to porcine mucin type II when assessed for its mucoadhesion and shown to transmigrate with an average velocity of 1.68 μm/s in uncoated channels, under biomimicked flow conditions. To investigate charge dependency on drug delivery and cytotoxicity, amygdalin loaded ACNPs were made with both anionic and cationic outer layer and assessed. ACNPs demonstrated greater yet sustained anti-cancerous effect on H1299 cell lines in a dose-dependent manner than free amygdalin suggesting greater cellular uptake of the former. In conclusion, biocompatible and biodegradable alginate-chitosan nanoparticles can be used as an effective drug delivery system for sustained and controlled amygdalin release with its improved cytotoxic effect on cancerous cells while protecting normal cells and tissues.

Self-Healing Hydrogels and Cryogels from Biodegradable Polyurethane Nanoparticle Crosslinked Chitosan

Hydrogels are widely used in tissue engineering owing to their high water retention and soft characteristics. It remains a challenge to develop hydrogels with tunable degradation rates, proper environmental responsiveness, and injectability. In this study, biodegradable difunctional polyurethane (DFPU) nanoparticle dispersions are synthesized from an eco-friendly waterborne process involving the use of glyoxal. Such DFPU is used to crosslink chitosan (CS). Schiff base linkages between DFPU and CS successfully produce self-healing hydrogels at room temperature. Moreover, cryogels are generated after being frozen at -20 °C. These gels are found to be sensitive to low pH and amine-containing molecules owing to the property of Schiff bases. Furthermore, the degradation rates can be adjusted by the type of the component oligodiols in DFPU. Rheological evaluation verifies the excellent self-healing properties (≈100% recovery after damage). Both the self-healing gels and cryogels are injectable (through 26-gauge and 18-gauge needles, respectively) and biocompatible. Rat implantation at 14 d shows the low immune responses of cryogels. The functionalized biodegradable polyurethane nanoparticles represent a new platform of crosslinkers for biomacromolecules such as chitosan through the dynamic Schiff reaction that may give rise to a wide variety of self-healing gels and cryogels for biomedical applications.

A Biodegradable Antibacterial Nanocomposite Based on Oxidized Bacterial Nanocellulose for Rapid Hemostasis and Wound Healing

The development of biodegradable and antibacterial hemostatic materials with high blood absorption to halt the internal hemorrhage of deep noncompressible wounds remains a challenge. In this study, a novel hemostatic nanocomposite (OBC/COL/CS) was fabricated by coupling oxidized bacterial cellulose (OBC) and chitosan (CS) with collagen (COL), that is, during the electrostatic self-assembly of OBC with CS (OBC/CS), COL was ingeniously attached as a functional component by the electrostatic attraction of cationic CS and anionic OBC. The introduction of collagen was anticipated to provide functional properties such as enhanced hemostasis and promotion of wound healing so as to achieve a new functional composite. This study is the first to evaluate the performance of OBC, OBC/CS, and the OBC/COL/CS composite for rapid internal hemostasis using a rat liver injury model. To our knowledge, this is also the first study to report that OBC has a faster biodegradability in vivo than commercial hemostatic oxidized regenerated plant cellulose (ORC). The OBC/COL/CS nanocomposite exhibited appropriate mechanical strength, broad spectrum antimicrobial properties, and excellent biodegradation in vivo. Furthermore, excellent hemostatic efficacy of the composite was confirmed in vivo. OBC/COL/CS exhibited greater procoagulant properties and blood-clotting capability, higher adhesion of erythrocytes and platelets with concomitant lower blood loss, in addition to ultrafast cessation of bleeding, superior to the commercial hemostatic ORC product Surgicel gauze. The results suggest that the OBC/COL/CS is a fast and efficient procoagulant agent with good antibacterial properties and great potential for use as an absorbable hemostat for control of internal bleeding.

Fabrication and characterization of PVA/CS-PCL/gel multi-scale electrospun scaffold: simulating extracellular matrix for enhanced cellular infiltration and proliferation

A new bi-component poly(vinylalcohol)(PVA)/chitosan(CS)-poly(e-caprolactone)(PCL)/gelatin(Gel) multiscale electrospun scaffold was developed and analyzed in comparison with several other single scale systems. To mimic the native extracellular matrix in composition and structure and promote the migration of cells inside the scaffold, PVA/CS composite nanofibers (102 ± 52 nm) and PCL/Gelcomposite microfiber (2.5 ± 1.0 µm) were simultaneously electrospun from the two opposite syringes and mixed on a rotating mandrel to generate a bi-component multi-scale membrane. The bi-component membrane was crosslinked by glutaraldehyde vapor to maintain its fiber morphology in the wet stage. Morphology, shrinkage and spectroscopic of the electrospun membranes were characterized. To test the newly developed multiscale membrane, we seeded mesenchymal stem cells (MSCs) derived from rabbit onto five different fiber scaffolds (PVA, PVA/CS, PCL, PCL/Gel and PVA/CS-PCL/Gel) and compared cell adhesion and proliferation between different groups for 3 days using scanning electron microscopy, inverted microscope observations assay and MTT colorimetric. Cell culture results suggest that the incorporation of chitosan and gelatin could enhance cell adhesion and cell spreading in comparison to the performance of single component scaffolds of PVA and PCL. The multiscale PVA/CS-PCL/Gel membrane scaffolds provide a better environment to increase the growth, adhesion, and proliferation of cells. Scanning electron microscopy (SEM) observations showed that the cells were not only adhered well and proliferated on the surface of the scaffolds, but were also able to infiltrate inside the scaffold within 3 days of culture. MTT assay and inverted microscope observations also showed that the PVA/CS-PCL/Gel complex fibrous membrane exhibited better activity than other single component/scale systems scaffolds. Our results provide the underlying insights needed to guide the design of the native extracellular matrix.

Efficient tribological properties of azomethine-functionalized chitosan as a bio-lubricant additive in paraffin oil: experimental and theoretical analysis

A simple condensation of chitosan (from shrimp shells) and 4-hydroxybenzaldehyde was performed to yield bio-lubricant additive comprised of azomethine functional groups to be used with paraffin lube oil in industries. The synthesized Schiff base derivative of chitosan (SBC) additive was characterized using a CHN analyzer and FT-IR spectroscopy, and the thermal stability was explored using thermogravimetry. The rheological properties of SBC additives in paraffin oil were studied and are discussed herein. The tribological properties of SBC were tested in paraffin as the base oil employing a four-ball tester with different experimental conditions (viz. the concentration of the additive, applied load, speed and time duration), following ASTM D4172A standards. The optimum concentration of the additive in the base oil was found to be 150 ppm, exhibiting minimum coefficient of friction, but with higher concentrations of additive in base oils, the coefficient of friction increased. UV-Vis spectroscopy studies were also performed to confirm the formation of SBC and dispersion stability. The determined tribological parameters, such as the coefficient of friction, mean wear scar diameters and mean wear scar volumes, were found to significantly reduce the coefficient of friction of paraffin oil upon the addition of SBC. The state of steel balls upon exposure to various experimental conditions was analyzed and explained based on outcomes from FESEM, EDX, ferrography and AFM spectroscopy. The insights into interactions of the synthesized SBC with the metal surface were explored using ab initio density functional theory, Fukui indices, molecular dynamics simulation and radial distribution function.

Schiff base derivative of chitosan as biolubricant additive explored in paraffin lube oil.

Novel 3D-printed methacrylated chitosan-laponite nanosilicate composite scaffolds enhance cell growth and biomineral formation in MC3T3 pre-osteoblasts

This study compared the effect of gelatin- and chitosan-based scaffolds on osteoblast biomineralization. These scaffolds have been modified using methacrylate and laponite nanosilicates to improve their mechanical strength and support osteoblast function. Scaffold materials were prepared to have the same compressive strength (14-15 MPa) such that differences in cell response would be isolated to differences in biopolymer chemistry. The materials were tested for rheological properties to optimize the bio-ink for successful 3D printing using a robocast-assisted deposition system. Osteoblasts were cultured on the surface of 3D-printed methacrylated chitosan-laponite (MAC-Lp), methacrylated gelatin-laponite (MAG-Lp), MAC, and MAG scaffolds. MAC-Lp scaffolds showed increased cell viability, cell growth, and biomineral formation as compared to MAG-Lp scaffolds. FTIR results showed the presence of higher biomineral phosphate and extracellular matrix (ECM) collagen-like amide formation on MAC-Lp scaffolds as compared to MAG-Lp scaffolds. MAC-Lp scaffolds showed increased density of ECM-like tissue from SEM analysis, stained mineral nodules from Alizarin staining, and the existence of Ca─P species evident by X-ray absorbance near edge structure analysis. In conclusion, MAC-Lp scaffolds enhanced osteoblast growth and biomineral formation as compared to MAG-Lp scaffolds.

PEG grafted chitosan scaffold for dual growth factor delivery for enhanced wound healing

Application of growth factors at wound site has improved the efficiency and quality of healing. Basic fibroblast growth factor (bFGF) and vascular endothelial growth factor (VEGF) induce proliferation of various cells in wound healing. Delivery of growth factor from controlled release systems protect it from degradation and also result in sustained delivery of it at the site of injury. The goal of the study was to develop a Polyethylene glycol (PEG) cross-linked cotton-like chitosan scaffold (CS-PEG-H) by freeze-drying method and chemically conjugate heparin to the scaffold to which the growth factors can be electrostatically bound and evaluate its wound healing properties in vitro and in vivo. The growth factor containing scaffolds induced increased proliferation of HaCaT cells, increased neovascularization and collagen formation seen by H and E and Masson's trichrome staining. Immunohistochemistry was performed using the Ki67 marker which increased proliferation of cells in growth factor containing scaffold treated group. Frequent dressing changes are a major deterrent to proper wound healing. Our system was found to release both VEGF and bFGF in a continuous manner and attained stability after 7 days. Thus our system can maintain therapeutic levels of growth factor at the wound bed thereby avoiding the need for daily applications and frequent dressing changes. Thus, it can be a promising candidate for wound healing.

Development, Validation, and Performance of Chitosan-Based Coatings Using Catechol Coupling

The use of long-lasting polymer coatings on biodevice surfaces has been investigated to improve material-tissue interaction, minimize adverse effects, and enhance their functionality. Natural polymers, especially chitosan, are of particular interest due to their excellent biological properties, such as biocompatibility, non-toxicity, and antimicrobial properties. One way to produce chitosan coating is by covalent grafting with catechol molecules such as dopamine, caffeic acid, and tannic acid, resulting in an attachment ten times stronger than that of simple physisorption. Caffeic acid presents an advantage over dopamine because it allows direct chitosan grafting, due to its terminal carboxylic acid group, without the need of a linking arm, as employed in the dopamine approach. In this study, the grafting of chitosan using caffeic acid, over surfaces or in solution, is compared with dopamine grafting using poly(ethylene glycol) as a linking arm. The following coating properties are observed; covering and homogeneity are assessed by X-ray photoelectron spectroscopy and atomic force microscopy analyses, hydrophilicity with contact angle measurements, stability with aging tests, anticorrosion behavior, and coating non-toxicity. Results show that grafting using caffeic acid/chitosan in solution over a metallic surface may be advantageous, compared to traditional dopamine coating.

Fabrication of chitosan/agarose scaffolds containing extracellular matrix for tissue engineering applications

One of the most effective approaches for treatment of cartilage involves the use of porous three-dimensional scaffolds, which are useful for improving not only cellular adhesion but also mechanical properties of the treated tissues. In this study, we manufactured a composite scaffold with optimum properties to imitate nasal cartilage attributes. Cartilage extracellular matrix (ECM) was used in order to improve the cellular properties of the scaffolds; while, chitosan and agarose were main materials that are used to boost the mechanical and rheological properties of the scaffolds. Furthermore, we explored the effect of the various weight ratios of chitosan, agarose, and ECM on the mechanical and biomedical properties of the composite scaffolds using the Taguchi method. The resulting composites display a range of advantages, including good mechanical strength, porous morphology, partial crystallinity, high swelling ratio, controlled biodegradability rate, and rheological characteristics. Additionally, we performed the cytotoxicity tests to confirm the improvement of the structure and better cell attachments on the scaffolds. Our findings illustrate that the presence of the ECM in chitosan/agarose structure improves the biomedical characteristics of the final scaffold. In addition, we were able to control the mechanical properties and microstructure of the scaffolds by optimizing the polymers' concentration and their resulting interactions. These results present a novel scaffold with simultaneously enhanced mechanical and cellular attributes comparing to the scaffolds without ECM for nasal cartilage tissue engineering applications.

Conductive biomass-based composite wires with cross-linked anionic nanocellulose and cationic nanochitin as scaffolds

In this study, a series of conductive composite wires were successfully prepared by combining dispersions of multi-wall carbon nanotubes (MWCNTs) and TEMPO-oxidized cellulose nanofibers (TOCNFs) with different MWCNTs contents into a dispersion of partially deacetylated α-chitin nanofibers (α-DECHNs) followed with a drying process. The TOCNFs/MWCNTs/α-DECHNs composite wires were prepared by extruding the negatively charged TOCNFs/MWCNTs dispersion into the positively charged α-DECHNs dispersion. The contact of the positively charged α-DECHNs and the negatively charged TOCNFs/MWCNTs triggers the electrostatic interaction (heterocoagulation) resulting in wire-shaped conductive composites. The SEM analysis indicates this conductive composite material has a wire-like shape with a rough but tight surface. The properties of samples were characterized by a zeta potential analyzer (Zetasizer Nano), a four-probe, an electrochemical workstation, a Fourier transform infrared spectroscopy (FTIR), an X-ray diffractometer (XRD), and a thermogravimetric analyzer (TG). Besides, the conductivity and the AC impedance of TOCNFs/MWCNTs/α-DECHNs composite wires with different MWCNTs contents were also analyzed. The conductivity of the composite wire increases from 9.98 × 10^-6 S∙cm^-1 to 1.56 × 10^-3 S∙cm^-1 as the MWCNTs content raises from 3.0 wt% to 14.0 wt%. When the MWCNTs content reaches 14.0 wt%, the prepared composite wire can light up LED at a voltage of 5 V, indicating the great potential of this biomass-based conductive composite in conductive material application.

Biomaterials for In Situ Tissue Regeneration: A Review

This review focuses on a somewhat unexplored strand of regenerative medicine, that is in situ tissue engineering. In this approach manufactured scaffolds are implanted in the injured region for regeneration within the patient. The scaffold is designed to attract cells to the required volume of regeneration to subsequently proliferate, differentiate, and as a consequence develop tissue within the scaffold which in time will degrade leaving just the regenerated tissue. This review highlights the wealth of information available from studies of ex-situ tissue engineering about the selection of materials for scaffolds. It is clear that there are great opportunities for the use of additive manufacturing to prepare complex personalized scaffolds and we speculate that by building on this knowledge and technology, the development of in situ tissue engineering could rapidly increase. Ex-situ tissue engineering is handicapped by the need to develop the tissue in a bioreactor where the conditions, however optimized, may not be optimum for accelerated growth and maintenance of the cell function. We identify that in both methodologies the prospect of tissue regeneration has created much promise but delivered little outside the scope of laboratory-based experiments. We propose that the design of the scaffolds and the materials selected remain at the heart of developments in this field and there is a clear need for predictive modelling which can be used in the design and optimization of materials and scaffolds.

Biomaterials for In Situ Tissue Regeneration: A Review

This review focuses on a somewhat unexplored strand of regenerative medicine, that is in situ tissue engineering. In this approach manufactured scaffolds are implanted in the injured region for regeneration within the patient. The scaffold is designed to attract cells to the required volume of regeneration to subsequently proliferate, differentiate, and as a consequence develop tissue within the scaffold which in time will degrade leaving just the regenerated tissue. This review highlights the wealth of information available from studies of ex-situ tissue engineering about the selection of materials for scaffolds. It is clear that there are great opportunities for the use of additive manufacturing to prepare complex personalized scaffolds and we speculate that by building on this knowledge and technology, the development of in situ tissue engineering could rapidly increase. Ex-situ tissue engineering is handicapped by the need to develop the tissue in a bioreactor where the conditions, however optimized, may not be optimum for accelerated growth and maintenance of the cell function. We identify that in both methodologies the prospect of tissue regeneration has created much promise but delivered little outside the scope of laboratory-based experiments. We propose that the design of the scaffolds and the materials selected remain at the heart of developments in this field and there is a clear need for predictive modelling which can be used in the design and optimization of materials and scaffolds.

Marine waste to a functional biomaterial: Green facile synthesis of modified-β-chitin from Uroteuthis duvauceli pens (gladius)

Chitin is the second most abundant biomass on earth but exploited the least. In this study, wastes from Uroteuthis duvauceli was utilized to extract 38.79 ± 1.38% dry weight of β-chitin using a new combination of decolorization, demineralization, and deproteinization processes. β-chitin was then derivatized with acrylamide in an efficient and green aqueous 8 wt% NaOH/4 wt% urea solvent via one-pot etherification. The success of carbamoylethyl ether of chitin and carboxyethyl chitin synthesis was confirmed by FTIR, ¹H NMR, ¹³C NMR, XRD, SEM, TGA, and DSC. The synthesized acrylamide-modified β-chitin derivatives were shown to exhibit water solubility and lower decomposition temperatures, which are primarily due to the disruption of the crystalline structure of β-chitin upon its dissolution and modification. In this era of climate change, this desirable strategy of harnessing β-chitin from wastes and converting it to value-added products is highly sought to mitigate the continuing ecological and economical imbalance brought about by marine-food wastes. To the best of our knowledge, this novel contribution is the first to report biorefinery of squid pens from this particular species and functionalizing it with acrylamide in a facile manner, thus, offering greater potential for future development to biocompatible chitin-based biomaterials intended for industrial, pharmaceutical and biomedical applications.

Recent Advances in Polymeric Nanocomposites of Metal-Organic Frameworks (MOFs)

Recently, metal-organic frameworks (MOFs) have garnered enormous attention from researchers owing to their superior physicochemical properties, which are of particular interest in various fields such as catalysis and the diverse areas of biomedicine. Despite their position in the utilization for various applications compared to other innovative nanocarriers such as dendrimers and mesoporous silica nanoparticles (MSNs), in terms of advantageous physicochemical attributes, as well as attractive textural properties, ease of characterization, and abundant surface chemistry for functionalization and other benefits, MOFs yet suffer from several issues such as poor degradability, which might lead to accumulation-induced biocompatibility risk. In addition, some of the MOFs suffer from a shortcoming of poor colloidal stability in the aqueous solution, hindering their applicability in diverse biomedical fields. To address these limitations, several advancements have been made to fabricate polymeric nanocomposites of MOFs for their utility in various biomedical fields. In this review, we aim to provide a brief emphasis on various organic polymers used for coating over MOFs to improve their physicochemical attributes considering a series of recently reported intriguing studies. Finally, we summarize with perspectives.

Nanohybrid Scaffold of Chitosan and Functionalized Graphene Oxide for Controlled Drug Delivery and Bone Regeneration

Nanohybrid scaffolds of chitosan have been designed for controlled drug delivery and bone regeneration. Sulfonated graphene oxide has been used to develop the nanohybrids. Nanohybrid scaffolds show highly hydrophilic character and greater mechanical strength as compared to pure chitosan. Nanohybrid scaffolds show an interconnected uniform porous network structure exhibiting sustained release kinetics of the antibacterial drug, tetracycline hydrochloride. Nanohybrids are found to be highly biocompatible in nature and are able to support and proliferate MG63 osteoblast cells and thereby induce bone tissue regeneration. The in-vivo bone healing study shows that the developed nanohybrid scaffolds have the potential to regenerate the bone faster without any side effects as compared to pure scaffolds. Hence, the developed nanohybrid scaffold has good potential as a controlled drug delivery vehicle and in bone tissue engineering for faster healing.

Effect of the Activation Process on the Microstructure and Electrochemical Properties of N-Doped Carbon Cathodes in Li-O2 Batteries

Lithium-oxygen (Li-O₂) batteries have the potential to provide high energy densities; however, they suffer from low actual specific capacity and poor cycle performance. Hence, it is urgent to design a satisfactory oxygen electrode for a Li-O₂ battery. In this study, carbonaceous materials, denominated CA, CB, and CC, from chitin were prepared by the three activators of H₃PO₄, KOH, and KHCO₃ as oxygen electrode materials for Li-O₂ batteries. The different carbon structural characteristics from the same precursor were regulated and controlled by different chemical reagents. Finally, the spherical particle cluster structure of CA has a high specific surface area, rich N doping, good connectivity, and uniform surface chemistry, so that CA acts as an oxygen electrode presenting excellent electron conductivity, providing sufficient, and stable electrochemical activity sites for oxygen reduction reaction and storing abundant discharge products. The electrochemical measurements indicate that at a current density of 0.02 mA/cm², a CA-based battery delivers a high specific capacity of 16 600 mA h/g and a stable cycle performance of 210 cycles. This study proposes a functional carbonaceous material from chitin as a cathode oxygen electrode, which provides an economical and sustainable way for the improvement of oxygen electrodes and the application of Li-O₂ batteries.

Development of chitosan/gelatin hydrogels incorporation of biphasic calcium phosphate nanoparticles for bone tissue engineering

The chitosan/gelatin hydrogel incorporated with biphasic calcium phosphate nanoparticles (BCP-NPs) as scaffold (CGB) for bone tissue engineering was reported in this article. Such nanocomposite hydrogels were fabricated by using cycled freeze-thawing method, of which physicochemical and biological properties were regulated by adjusting the weight ratio of chitosan/gelatin/BCP-NPs. The needle-like BCP-NPs were dispersed into composites uniformly, and physically cross-linked with chitosan and gelatin, which were identified via Scanning Electron Microscope (SEM) images and Fourier Transform Infrared Spectroscopy (FT-IR) analysis. The porosity, equilibrium swelling ratio, and compressive strength of CGB scaffolds were mainly influenced by the BCP-NPs concentration. In vitro degradation analysis in simulated body fluids (SBF) displayed that CGB scaffolds were degraded up to at least 30 wt% in one month. Also, CCK-8 analysis confirmed that the prepared scaffolds had a good cytocompatibility through in culturing with bone marrow mesenchymal stem cells (BMSCs). Finally, In vivo animal experiments revealed that new bone tissue was observed inside the scaffolds, and gradually increased with increasing months, when implanted CGB scaffolds into large necrotic lesions of rabbit femoral head. The above results suggested that prepared CGB nanocomposites had the potential to be applied in bone tissue engineering.

Sponges of Carboxymethyl Chitosan Grafted with Collagen Peptides for Wound Healing

Burns are physically debilitating and potentially fatal injuries. Two marine biomaterials, carboxymethyl chitosan (CMC) and collagen peptides (COP), have emerged as promising burn dressings. In this paper, sponges of carboxymethyl chitosan grafted with collagen peptide (CMC–COP) were prepared by covalent coupling and freeze drying. Scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy were then used to characterize the prepared sponges. To evaluate the wound healing activity of the CMC–COP sponges, in vitro tests including cell viability scratch wound healing and scald wound healing experiments were performed in rabbits. Appearance studies revealed the porous nature of sponges and FTIR spectroscopy demonstrated the successful incorporation of COP into CMC. The in vitro scratch assay showed that treatment with CMC–COP sponges (at 100 μg/mL) had significant effects on scratch closure. For burn wounds treated with CMC–COP, regeneration of the epidermis and collagen fiber deposition was observed on day 7, with complete healing of the epidermis and wound on days 14 and 21, respectively. Based on the pathological examination by hematoxylin and eosinstaining, the CMC–COP group demonstrated pronounced wound healing efficiencies. These results confirmed that the CMC–COP treatment enhanced cell migration and promoted skin regeneration, thereby highlighting the potential application of these sponges in burn care.

Sources, Extraction and Biomedical Properties of Polysaccharides

In the recent era, bioactive compounds from plants have received great attention because of their vital health-related activities, such as antimicrobial activity, antioxidant activity, anticoagulant activity, anti-diabetic activity, UV protection, antiviral activity, hypoglycemia, etc. Previous studies have already shown that polysaccharides found in plants are not likely to be toxic. Based on these inspirational comments, most research focused on the isolation, identification, and bioactivities of polysaccharides. A large number of biologically active polysaccharides have been isolated with varying structural and biological activities. In this review, a comprehensive summary is provided of the recent developments in the physical and chemical properties as well as biological activities of polysaccharides from a number of important natural sources, such as wheat bran, orange peel, barely, fungi, algae, lichen, etc. This review also focused on biomedical applications of polysaccharides. The contents presented in this review will be useful as a reference for future research as well as for the extraction and application of these bioactive polysaccharides as a therapeutic agent.

Characteristics and clinical assessment of antibiotic delivery by chitosan sponge in the high-risk diabetic foot: a case series

OBJECTIVE

The local delivery of antimicrobials is attractive for a number of reasons. Chitosan, a biodegradable polysaccharide sponge material, has been proposed as medium to deliver antibiotics directly to wounds. In this report we evaluate the safety and practicality of antimicrobial delivery via chitosan sponge.

METHOD

We present the clinical course and systemic absorption characteristics of three cases of people with diabetic foot wounds treated with antibiotic soaked chitosan sponge (Sentrex BioSponge, Bionova Medical, Germantown, TN). The antibiotic sponge was made by reconstituting 1.2g tobramycin or 100mg doxycycline in 10-15ml saline and saturating the sponge with the solution. The sponge was then applied to the wounds. Serum levels of each respective antibiotic were evaluated after application. Additional in vitro studies were conducted evaluating elution of antibiotics from the chitosan sponge at established minimum inhibitory concentrations (MIC) for Staphylococcus aureus over 28 days.

RESULTS

No patient experienced adverse local or systemic effects due to the sponge treatment. The measured serum levels applied antibiotics remained far less than established minimums after intravenous therapy. Each patient required further treatment, however local infection or contamination resolved during the course of their hospital stay after the chitosan/antibiotic application.

CONCLUSION

The use of antibiotic-impregnated chitosan sponges appears a safe and effective mechanism of local delivery of antimicrobials in wounds. Future studies and clinical trials are ongoing to confirm these results and to guide clinical applications.

Advance of Nano-Composite Electrospun Fibers in Periodontal Regeneration

Periodontitis is considered to be the main cause of tooth loss, which affects about 15% of the adult population around the world. Scaling and root-planning are the conventional treatments utilized to remove the contaminated tissue and bacteria, but eventually lead to the formation of a poor connection-long junctional epithelium. Therefore, regenerative therapies, such as guided tissue/bone regeneration (GTR/GBR) for periodontal regeneration have been attempted. GTR membranes, acting as scaffolds, create three-dimensional (3D) environment for the guiding of cell attachment, proliferation and differentiation, and play a significant role in periodontal regeneration. Nano-composite scaffolds based on electrospun nanofibers have gained great attention due to their ability to emulate natural extracellular matrix (ECM) that affects cell survival, attachment and reorganization. Promoted protein absorption, cellular reactions, activation of specific gene expression and intracellular signaling, and high surface area to volume ratio are also important properties of nanofibrous scaffolds. Moreover, several bioactive components, such as bioceramics and functional polymers can be easily blended into nanofibrous matrixes to regulate the physical-chemical-biological properties and regeneration abilities. Simultaneously, functional growth factors, proteins and drugs are also incorporated to regulate cellular reactions and even modify the local inflammatory microenvironment, which benefit periodontal regeneration and functional restoration. Herein, the progress of nano-composite electrospun fibers for periodontal regeneration is reviewed, including fabrication methods, compound types and processes, and surface modifications, etc. Significant proof-of-concept examples are utilized to illustrate the results of material characteristics, cellular interactions and periodontal regenerations. Finally, the existing limitations of nano-composite electrospun fibers and the development tendencies in future are also discussed.

Fabrication of chitosan/heparinized graphene oxide multilayer coating to improve corrosion resistance and biocompatibility of magnesium alloys

Due to its good biodegradability and mechanical properties, magnesium alloys are considered as the ideal candidate for the cardiovascular stents. However, the rapid degradation in human physiological environment and the poor biocompatibility seriously limit its application for biomaterials. In the present study, a chitosan/heparinized graphene oxide (Chi/HGO) multilayer coating was constructed on the AZ31B magnesium alloy surface using layer-by-layer (LBL) method to improve the corrosion resistance and biocompatibility. The results of attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), Raman spectrum (RAMAN), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) showed that a dense and compact Chi/HGO multilayer coating was fabricated on the magnesium alloy surface. The results of potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), pH value changes and magnesium ion release suggested that the multilayer coating can significantly enhance the corrosion resistance of the magnesium alloy. Moreover, the Chi/HGO multilayer coating could not only significantly reduce the hemolysis rate and platelet adhesion, but also promote the adhesion and proliferation of endothelial cells. Therefore, the Chi/HGO multilayer coating can simultaneously improve the corrosion resistance and biocompatibility of the magnesium alloys.

Recent developments in the synthesis of poly(hydroxybutyrate) based biocomposites

Poly(hydroxybutyrate) (PHB) has become an attractive biomaterial in research and development for past few years. It is natural bio-based aliphatic polyester produced by many types of bacteria. Due to its biodegradable, biocompatible, and eco-friendly nature, PHB can be used in line with bioactive species. However, high production cost, thermal instability, and poor mechanical properties limit its desirable applications. So there is need to incorporate PHB with other materials or biopolymers for the development of some novel PHB based biocomposites for value addition. Many attempts have been employed to incorporate PHB with other biomaterials (or biopolymers) to develop sustainable biocomposites. In this review, some recent developments in the synthesis of PHB based biocomposites and their biomedical, packaging and tissue engineering applications have been focused. The development of biodegradable PHB based biocomposites with improved mechanical properties could be used to overcome its native limitations hence to open new possibilities for industrial applications.

Ocular anti-inflammatory activity of prednisolone acetate loaded chitosan-deoxycholate self-assembled nanoparticles

Background and purpose: Conventional topical ophthalmic aqueous solutions and suspensions are often associated with low bioavailability and high administration frequency, pulsatile dose and poor exposure to certain ocular parts. The aim of this study was to develop an ophthalmic nanoparticles loaded gel, for delivering prednisolone acetate (PA), to increase dosing accuracy, bioavailability, and accordingly, efficiency of PA in treating inflammatory ocular diseases. Methods: A novel formulation of self-assembled nanoparticles was prepared by the complexation of chitosan (CS) and, the counter-ion, sodium deoxycholate (SD), loaded with the poorly-water-soluble PA. Particle size, zeta potential, encapsulation efficiency (EE) and drug loading content (LC) of prepared nanoparticles were assessed. Moreover, the nanoparticles were characterized using differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). Drug release and eye anti-inflammatory potential of the prepared novel formulation was investigated. Results: Mean particle size of the nanoparticles have dropped from 976 nm ±43 (PDI 1.285) to 480 nm ±28 (PDI 1.396) when the ratio of CS-SD was decreased. The incorporation of 0.1-0.3% of polyvinyl alcohol (PVA), in the preparation stages, resulted in smaller nanoparticles: 462 nm ±19 (PDI 0.942) and 321 nm ±22 (PDI 0.454) respectively. DSC and FTIR results demonstrated the interaction between CS and SD, however, no interactions were detected between PA and CS or SD. Drug release of PA as received, in simulated tears fluid (pH 7.4), showed a twofold increase (reaching an average of 98.6% in 24 hours) when incorporated into an optimized nanoparticle gel formulation (1:5 CS-SD). Conclusion: The anti-inflammatory effect of PA nanoparticles loaded gel on female guinea pig eyes was significantly superior to that of the micronized drug loaded gel (P < 0.05).

In vitro evaluation of biodegradable nHAP-Chitosan-Gelatin-based scaffold for tissue engineering application

The present study focuses on fabrication and characterisation of porous composite scaffold containing hydroxyapatite (HAP), chitosan, and gelatin with an average pore size of 250-1010 nm for improving wound repair and regeneration by Electrospinning method. From the results of X-Ray Diffraction (XRD) study, the peaks correspond to crystallographic structure of HAP powder. The presence of functional group bonds of HAP powder, Chitosan and scaffold was studied using Fourier Transform Infrared Spectroscopy (FTIR). The surface morphology of the scaffold was observed using Scanning Electron Microscope (SEM). The Bioactivity of the Nano composite scaffolds was studied using simulated body fluid solution at 37 ± 1°C. The biodegradability test was studied using Tris-Buffer solution for the prepared nanocomposites [nano Chitosan, nano Chitosan gelatin, Nano based Hydroxyapatite Chitosan gelatin]. The cell migration and potential biocompatibility of nHAP-chitosan-gelatin scaffold was assessed via wound scratch assay and were compared to povedeen as control. Cytocompatibility evaluation for Vero Cells using wound scratch assay showed that the fabricated porous nanocomposite scaffold possess higher cell proliferation and growth than that of povedeen. Thus, the study showed that the developed nanocomposite scaffolds are potential candidates for regenerating damaged cell tissue in wound healing process.

In vitro and in vivo evaluation of chitosan scaffolds combined with simvastatin-loaded nanoparticles for guided bone regeneration

The objective of this study was to fabricate and characterize chitosan combined with different amounts of simvastatin-loaded nanoparticles and to investigate their potential for guided bone regeneration in vitro and in vivo. Different SIM-CSN formulations were combined into a chitosan scaffold (SIM-CSNs-S), and the morphology, simvastatin release profile, and effect on cell proliferation and differentiation were investigated. For in vivo experiments, ectopic osteogenesis and the critical-size cranial defect model in SD rats were chosen to evaluate bone regeneration potential. All three SIM-CSNs-S formulations had a porous structure and exhibited sustained simvastatin release. CSNs-S showed excellent degradation and biocompatibility characteristics. The 4 mg SIM-CSNs-S formulation stimulated higher BMSC ALP activity levels, demonstrated significantly earlier collagen enhancement, and led to faster bone regeneration than the other formulations. SIM-CSNs-S should have a significant effect on bone regeneration.

Modification of Chitosan for the Generation of Functional Derivatives

Today, chitosan (CS) is probably considered as a biofunctional polysaccharide with the most notable growth and potential for applications in various fields. The progress in chitin chemistry and the need to replace additives and non-natural polymers with functional natural-based polymers have opened many new opportunities for CS and its derivatives. Thanks to the specific reactive groups of CS and easy chemical modifications, a wide range of physico-chemical and biological properties can be obtained from this ubiquitous polysaccharide that is composed of β-(1,4)-2-acetamido-2-deoxy-d-glucose repeating units. This review is presented to share insights into multiple native/modified CSs and chitooligosaccharides (COS) associated with their functional properties. An overview will be given on bioadhesive applications, antimicrobial activities, adsorption, and chelation in the wine industry, as well as developments in medical fields or biodegradability.

Polymeric nanodroplets: an emerging trend in gaseous delivery system

Currently, nanotechnology-based products are gaining tremendous interest in the development of nanocarriers for drug delivery and nano-diagnostic devices. Nanodroplets (NDs) emerge as novel carriers for delivery of gases and actives with a wide range of applications in fields of theranostics, drug delivery and diagnostic devices. NDs are multifunctional carriers composed of an outer shell of drug and polymer that encapsulates the inner core of gases and liquid molecules. This review focuses on properties of NDs, mathematical theories, different polymers used in the preparation of NDs, characterisation, animal models, toxicity and applications of NDs. These nanocarriers are advantageous due to their cost-effectiveness and compatibility with both gaseous and liquid core molecules. NDs are increasingly utilised in the field of healthcare due to their properties like large effective surface area for drug loading and target specificity. These nanocarriers are also employed in the treatment of hypoxia, multiple sclerosis and cancer. In the near future, NDs will advance in fields of personalised medicine and precise theranostics.

Expanding Hydrophobically Modified Chitosan Foam for Internal Surgical Hemostasis: Safety Evaluation in a Murine Model

BACKGROUND

A novel injectable expanding foam based on hydrophobically modified chitosan (HM-CS) was developed to improve hemostasis during surgeries. HM-CS is an amphiphilic derivative of the natural biopolymer chitosan (CS); HM-CS has been shown to improve the natural hemostatic characteristics of CS, but its internal safety has not been systematically evaluated. The goal of this study was to compare the long-term in vivo safety of HM-CS relative to a commonly used fibrin sealant (FS), TISSEEL (Baxter).

METHODS

Sixty-four Sprague-Dawley rats (275-325 g obtained from Charles River Laboratories) were randomly assigned to control (n = 16) or experimental (n = 48) groups. Samples of the test materials (HM-CS [n = 16], CS [n = 16], and FS [n = 16]) applied to a nonlethal liver excision (0.4 ± 0.3 g of the medial lobe) in rats were left inside the abdomen to degrade. Animals were observed daily for signs of morbidity and mortality. Surviving animals were sacrificed at 1 and 6 wk; the explanted injury sites were microscopically assessed.

RESULTS

All animals (64/64) survived both the 1- and 6-wk time points without signs of morbidity. Histological examination showed a comparable pattern of degradation for the various test materials. FS remnants and significant adhesions to neighboring tissues were observed at 6 wk. Residual CS and HM-CS were observed at the 6 wk with fatty deposits at the site of injury. Minimal adhesions were observed for CS and HM-CS.

CONCLUSIONS

The internal safety observed in the HM-CS test group after abdominal implantation indicates that injectable HM-CS expanding foam may be an appropriate internal use hemostatic candidate.

Identification and characterization of a marine-derived chitinolytic fungus, Acremonium sp. YS2-2

Chitin is the most abundant biopolymer in marine environments. To facilitate its utilization, our laboratory screened marine-derived fungal strains for chitinolytic activity. One chitinolytic strain isolated from seawater, designated YS2-2, was identified as Acremonium species based on morphological and phylogenetic analyses. Acremonium species are cosmopolitan fungi commonly isolated from both terrestrial and marine environments, but their chitinolytic activity is largely unknown. The extracellular crude enzyme of YS2-2 exhibited optimum chitinolytic activity at pH 6.0-7.6, 23-45°C, and 1.5% (w/v) NaCl. Degenerate PCR revealed the partial cDNA sequence of a putative chitinase gene, chiA, in YS2-2. The expression of chiA was dramatically induced in response to 1% (w/v) colloidal chitin compared to levels under starvation, chitin powder, and glucose conditions. Moreover, the chiA transcript levels were positively correlated with chitinolytic activities under various colloidal chitin concentrations, suggesting that ChiA mediates chitinolytic activity in this strain. Our results provide a basis for additional studies of marinederived chitinolytic fungi aimed at improving industrial applications.