Combining nonthermal technologies to control foodborne microorganisms

High-pressure processing--effects on microbial food safety and food quality

High-pressure processing (HPP) is a nonthermal process capable of inactivating and eliminating pathogenic and food spoilage microorganisms. This novel technology has enormous potential in the food industry, controlling food spoilage, improving food safety and extending product shelf life while retaining the characteristics of fresh, preservative-free, minimally processed foods. As with other food processing methods, such as thermal processing, HPP has somewhat limited applications as it cannot be universally applied to all food types, such as some dairy and animal products and shelf-stable low-acid foods. Herein, we discuss the effects of high-pressure processing on microbial food safety and, to a lesser degree, food quality.

Combined use of ultrasound and natural antimicrobials to inactivate Listeria monocytogenes in orange juice

The presence of Listeria monocytogenes could seriously affect the safety of nonpasteurized fruit juices. High-intensity ultrasound combined with mild heat treatment and natural antimicrobials may be an alternative technology for fruit juice preservation. The response of L. monocytogenes in orange juice to combined treatments involving moderate temperature (45 degrees C), high-intensity ultrasound (600 W, 20 kHz, 95.2 microM wave amplitude), and the addition of different levels of vanillin (0, 1,000, 1,500, and 2,000 ppm), citral (0, 75, and 100 ppm), or both was investigated to find the most effective inactivation treatment. Nonlinear semilogarithmic survival curves were successfully fitted by the Weibull model. The presence of vanillin or citral greatly increased the bactericidal effect of thermosonication and changed the distribution of inactivation times. When both antimicrobials were added together and ultrasound was applied, narrowest frequency shapes, skewed to the right, with low ariances and death time means between 1.6 and 2.6 min, were obtained. Orange juices with 1,500 or 1,000 ppm of vanillin and 100 ppm of citral were pleasant for the consumers.

Bacteriocin-based strategies for food biopreservation

Bacteriocins are ribosomally-synthesized peptides or proteins with antimicrobial activity, produced by different groups of bacteria. Many lactic acid bacteria (LAB) produce bacteriocins with rather broad spectra of inhibition. Several LAB bacteriocins offer potential applications in food preservation, and the use of bacteriocins in the food industry can help to reduce the addition of chemical preservatives as well as the intensity of heat treatments, resulting in foods which are more naturally preserved and richer in organoleptic and nutritional properties. This can be an alternative to satisfy the increasing consumers demands for safe, fresh-tasting, ready-to-eat, minimally-processed foods and also to develop "novel" food products (e.g. less acidic, or with a lower salt content). In addition to the available commercial preparations of nisin and pediocin PA-1/AcH, other bacteriocins (like for example lacticin 3147, enterocin AS-48 or variacin) also offer promising perspectives. Broad-spectrum bacteriocins present potential wider uses, while narrow-spectrum bacteriocins can be used more specifically to selectively inhibit certain high-risk bacteria in foods like Listeria monocytogenes without affecting harmless microbiota. Bacteriocins can be added to foods in the form of concentrated preparations as food preservatives, shelf-life extenders, additives or ingredients, or they can be produced in situ by bacteriocinogenic starters, adjunct or protective cultures. Immobilized bacteriocins can also find application for development of bioactive food packaging. In recent years, application of bacteriocins as part of hurdle technology has gained great attention. Several bacteriocins show additive or synergistic effects when used in combination with other antimicrobial agents, including chemical preservatives, natural phenolic compounds, as well as other antimicrobial proteins. This, as well as the combined use of different bacteriocins may also be an attractive approach to avoid development of resistant strains. The combination of bacteriocins and physical treatments like high pressure processing or pulsed electric fields also offer good opportunities for more effective preservation of foods, providing an additional barrier to more refractile forms like bacterial endospores as well. The effectiveness of bacteriocins is often dictated by environmental factors like pH, temperature, food composition and structure, as well as the food microbiota. Foods must be considered as complex ecosystems in which microbial interactions may have a great influence on the microbial balance and proliferation of beneficial or harmful bacteria. Recent developments in molecular microbial ecology can help to better understand the global effects of bacteriocins in food ecosystems, and the study of bacterial genomes may reveal new sources of bacteriocins.

High-pressure processing and antimicrobial biodegradable packaging to control Listeria monocytogenes during storage of cooked ham

The efficiency of combining high-pressure processing (HPP) and active packaging technologies to control Listeria monocytogenes growth during the shelf life of artificially inoculated cooked ham was assessed. Three lots of cooked ham were prepared: control, packaging with alginate films, and packaging with antimicrobial alginate films containing enterocins. After packaging, half of the samples were pressurized. Sliced cooked ham stored at 6 degrees C experienced a quick growth of L. monocytogenes. Both antimicrobial packaging and pressurization delayed the growth of the pathogen. However, at 6 degrees C the combination of antimicrobial packaging and HPP was necessary to achieve a reduction of inoculated levels without recovery during 60 days of storage. Further storage at 6 degrees C of pressurized antimicrobial packed cooked ham resulted in L. monocytogenes levels below the detection limit (day 90). On the other hand, storage at 1 degrees C controlled the growth of the pathogen until day 39 in non-pressurized ham, while antimicrobial packaging and storage at 1 degrees C exerted a bacteriostatic effect for 60 days. All HPP lots stored at 1 degrees C led to counts <100CFU/g at day 60. Similar results were observed when combining both technologies. After a cold chain break no growth of L. monocytogenes was observed in pressurized ham packed with antimicrobial films, showing the efficiency of combining both technologies.

Inactivation kinetics of selected aerobic and anaerobic bacterial spores by pressure-assisted thermal processing

The combined pressure-thermal inactivation kinetics of spores from three strains of anaerobic (Clostridium sporogenes, C. tyrobutylicum, and Thermoanaerobacterium thermosaccharolyticum), and six strains of aerobic (Bacillus amyloliquefaciens and B. sphaericus) bacteria were studied. Spores of these bacteria were prepared in deionized water and treated in a custom-made kinetic tester over various pressure (0.1 and 700 MPa) and thermal (105 and 121 degrees C) combinations. Survivor data were modeled using log-linear and Weibull models to obtain relevant kinetic parameters. In comparison to thermal treatment alone, the combined pressure-thermal conditions accelerated the inactivation of the spores tested. A measurable fraction of spore populations was inactivated during the pressure come-up time. Pressure-assisted thermal processing (PATP) at 700 MPa and 121 degrees C for 1 min inactivated up to 7-8 log for some of spores tested. Among bacteria evaluated, based on survivor curve data T. thermosaccharolyticum, B. amyloliquefaciens Fad 82, and Fad 11/2 were found to produce the most PATP-resistant spores. PATP inactivation plots showed characteristic upward curvature, which is indicative of the tailing behavior. Since both log-linear and Weibull kinetic models did not consider microbial reduction during process come-up time, our results demonstrated that the estimated model parameters were not adequate to compare combined pressure-thermal resistance of various bacterial spores tested.

Methodological Quality Assessment of Review Articles Evaluating Interventions to Improve Microbial Food Safety

Review articles are a means of summarizing the potentially vast volume of research on a topic. However, the methodological quality of review articles varies, and reviews on the same topic may reach different conclusions. We evaluated 65 review articles published between 2000 and 2005 that addressed the effectiveness of microbial food safety interventions, using criteria for methodological soundness developed in the medical field. Overall, the methodological quality of the review articles was poor, with none of the reviews providing information on the method of locating primary research studies or the inclusion/exclusion criteria for selecting primary studies. None of the reviews included a critical appraisal of the methodological quality of the primary studies. Less than half of the reviews stated a focused research question, explored possible reasons for differences in the results of primary studies, discussed the generalizability of results, or proposed directions for future research. There is a need to improve the methodological quality of review articles on microbial food safety interventions if they are to be of use in policy and decision making.

CorA affects tolerance of Escherichia coli and Salmonella enterica serovar Typhimurium to the lactoperoxidase enzyme system but not to other forms of oxidative stress

The enzyme lactoperoxidase is part of the innate immune system in vertebrates and owes its antimicrobial activity to the formation of oxidative reaction products from various substrates. In a previous study, we have reported that, with thiocyanate as a substrate, the lactoperoxidase system elicits a distinct stress response in Escherichia coli MG1655. This response is different from but partly overlapping with the stress responses to hydrogen peroxide and to superoxide. In the current work, we constructed knockouts in 10 lactoperoxidase system-inducible genes to investigate their role in the tolerance of E. coli MG1655 to this antimicrobial system. Five mutations resulted in a slightly increased sensitivity, but one mutation (corA) caused hypersensitivity to the lactoperoxidase system. This hypersensitive phenotype was specific to the lactoperoxidase system, since neither the sensitivity to hydrogen peroxide nor to the superoxide generator plumbagin was affected in the corA mutant. Salmonella enterica serovar Typhimurium corA had a similar phenotype. Although corA encodes an Mg2+ transporter and at least three other inducible open reading frames belonged to the Mg2+ regulon, repression of the Mg stimulon by Mg2+ did not change the lactoperoxidase sensitivity of either the wild-type or corA mutant. Prior exposure to 0.3 mM Ni2+, which is also transported by CorA, strongly sensitized MG1655 but not the corA mutant to the lactoperoxidase system. Furthermore, this Ni2+-dependent sensitization was suppressed by the CorA-specific inhibitor Co(III) hexaammine. These results indicate that CorA affects the lactoperoxidase sensitivity of E. coli by modulating the cytoplasmic concentrations of transition metals that enhance the toxicity of the lactoperoxidase system.

Pressure effect on the stability and the conformational dynamics of the D-Galactose/D-Glucose-binding protein from Escherichia coli

The effect of the pressure on the structure and stability of the D-Galactose/D-Glucose binding protein (GGBP) from Escherichia coli was studied by steady-state and time-resolved fluorescence spectroscopy, and the ability of glucose ligand to stabilize the GGBP structure was also investigated. Steady-state fluorescence experiments showed a marked quenching of fluorescence emission of GGBP in the absence of glucose. Instead, the presence of glucose seems to stabilize the structure of GGBP at low and moderate pressure values. Time-resolved fluorescence measurements showed that the GGBP taumean in the absence of glucose varies significantly up to 600 bar, while in the presence of the ligand it is almost unaffected by pressure increase up to 600 bar. The effect of the pressure on GGBP was also studied by molecular dynamics simulations. The simulation data support the spectroscopic results and confirm that the presence of glucose is able to contrast the negative effects of pressure on the protein structure. Taken together, the spectroscopic and computer simulation studies suggest that at pressure values up to 2000 bar the structure of GGBP in the absence of glucose remains folded, but a significant perturbation of the protein secondary structures can be detected. The binding of glucose reduces the negative effect of pressure on protein structure and confers protection from perturbation especially at moderate pressure values.

Induction of oxidative stress by high hydrostatic pressure in Escherichia coli

Using leaderless alkaline phosphatase as a probe, it was demonstrated that pressure treatment induces endogenous intracellular oxidative stress in Escherichia coli MG1655. In stationary-phase cells, this oxidative stress increased with the applied pressure at least up to 400 MPa, which is well beyond the pressure at which the cells started to become inactivated (200 MPa). In exponential-phase cells, in contrast, oxidative stress increased with pressure treatment up to 150 MPa and then decreased again, together with the cell counts. Anaerobic incubation after pressure treatment significantly supported the recovery of MG1655, while mutants with increased intrinsic sensitivity toward oxidative stress (katE, katF, oxyR, sodAB, and soxS) were found to be more pressure sensitive than wild-type MG1655. Furthermore, mild pressure treatment strongly sensitized E. coli toward t-butylhydroperoxide and the superoxide generator plumbagin. Finally, previously described pressure-resistant mutants of E. coli MG1655 displayed enhanced resistance toward plumbagin. In one of these mutants, the induction of endogenous oxidative stress upon high hydrostatic pressure treatment was also investigated and found to be much lower than in MG1655. These results suggest that, at least under some conditions, the inactivation of E. coli by high hydrostatic pressure treatment is the consequence of a suicide mechanism involving the induction of an endogenous oxidative burst.

The relationship between chemical structure and antimicrobial activity of selected nicotinates, p-iodobenzoates, picolinates and isonicotinates

Alkaline metal, calcium and magnesium p-iodobenzoates and alkaline metal nicotinates, as well as sodium and potassium picolinic and isonicotinates were investigated by means of their antimicrobial and chemical properties. The quality estimation of the influence of metal cation coordinated to the carboxylic anion of the series of studied compounds on their antimicrobial activity as well as on the vibrational structure of whole complex in water solution was done. The changes in antimicrobial properties and in charge distribution of the complex along the position of nitrogen atom in the aromatic ring in sodium and potassium complexes were investigated. The analysis of influence of iodine substituent in para position on the change of electronic charge distribution of carboxylate anion and aromatic ring was done. The relationship between electronic properties estimated by vibrational spectroscopy and antimicrobial activity of studied complexes was investigated.