The Essential Role of Bond Energetics in C-H Activation/Functionalization

Statistical analysis of C-H activation by oxo complexes supports diverse thermodynamic control over reactivity

Transition metal oxo species are key intermediates for the activation of strong C-H bonds. As such, there has been interest in understanding which structural or electronic parameters of metal oxo complexes determine their reactivity. Factors such as ground state thermodynamics, spin state, steric environment, oxygen radical character, and asynchronicity have all been cited as key contributors, yet there is no consensus on when each of these parameters is significant or the relative magnitude of their effects. Herein, we present a thorough statistical analysis of parameters that have been proposed to influence transition metal oxo mediated C-H activation. We used density functional theory (DFT) to compute parameters for transition metal oxo complexes and analyzed their ability to explain and predict an extensive data set of experimentally determined reaction barriers. We found that, in general, only thermodynamic parameters play a statistically significant role. Notably, however, there are independent and significant contributions from the oxidation potential and basicity of the oxo complexes which suggest a more complicated thermodynamic picture than what has been shown previously.

Concerted vs Nonconcerted Metalation-Deprotonation in Orthogonal Direct C-H Arylation of Heterocycles with Halides: A Computational Study

A computational study on the base-assisted orthogonal C-H arylation of azoles with halides is reported. Although concerted metalation-deprotonation (CMD) is favored under acetate assistance at the C5 site that displays the best balance of nucleophilic and acidic character, the most acidic C2 site may be selectively targeted under carbonate assistance by taking advantage of a carbanionic-type (or non-concerted) metalation-deprotonation mechanism (nCMD). For the latter, several experimental probes including base, ligand, and solvent effects have been collected in favor of an outer-sphere deprotonation process after the formation of a [(L_n)(N1-heteroaryl)PdArX] complex. However, no computational analysis of this fundamental elementary step has been so far provided. We have carried out a series of density functional theory (DFT) calculations that delineate the structural and energetic aspects of the nCMD pathway. Starting with the oxa(thia)zole-4-carboxylates selected in our group to engineer the competitive C2 vs C5 arylation in azoles, we show that the energy barrier of the C2 anion generation is lying unexpectedly lower than the prior heterocycle coordination to Pd that is eventually identified as the rate-determining step. These calculations provide satisfactory explanations for the experimental observations of the divergence between nCMD and CMD reactivity, and notably a lower barrier at the C2 site for the nCMD process. On the other hand, the nCMD process is ineffective at the C5 site. Evaluation of various azoles reveals that the nCMD mechanism at C2 is viable from the most acidic (benzo)oxazoles to moderately acidic (benzo)thiazoles, as well as weakly acidic imidazoles. In all cases, in accordance with previously reported experimental data in orthogonal direct C-H arylation of azoles, the nCMD route is found energetically competitive to the CMD one at C5 for all azoles, except for imidazole which needs stronger basic conditions than simple carbonate assistance. Additionally, the acetate ligand, which is the base of choice for CMD, was found inefficient for nCMD and the comparative performance of acetate vs carbonate to assist CMD in the azole series reveals also considerable changes from electronically close but environmentally divergent C5-H vs C2-H bonds.

Metal-catalyzed silylation of sp3C–H bonds

Metal-catalyzed activations of inert sp³C–H bonds have recently brought a revolution in the synthesis of useful molecules and molecular materials, due to the interest of the formed sp³C–SiR₃ silanes, stable organometallic species, and for further functionalizations that sp³C–H bonds cannot reach directly.

δ-Regioselective heteroarylation of free alcohols through 1,5-hydrogen-atom transfer

Silver-catalyzed δ-regioselective heteroarylation of C(sp³)–H bonds (1°, 2°, and 3°) in alcohols with divergent N-heteroarenes.

KF-Promoted copper-catalyzed highly efficient and selective oxidation of methane and other alkanes with a dramatic additive effect

Selective oxidation of methane is traditionally challenging. Now using KF could dramatic improve the efficiency of copper catalyzed methane oxidation with K₂S₂O₈ as oxidant. The role of KF is conjectured to promote [SO₄˙]⁻ to escape the solvent cage.

Rare proximity enforced copper hydrogen interactions in copper(i)-chalcogenones

Homoleptic tetra-coordinated copper(i)-chalcogenone complexes have been reported with rare proximity-enforced intramolecular Cu⋯H–C(sp³) hydrogen bonding interactions.

Visible-light-promoted α-methoxymethylation and aminomethylation of ketones with methanol as the C1 source

Visible-light-promoted α-methoxymethylation and aminomethylation of ketones using methanol as a sustainable C1 source have been developed. With rose bengal as the photosensitizer and air as the green oxidant, the methoxymethylation reactions proceeded smoothly under visible light irradiation at ambient temperature. Additionally, a one-pot one-step α-aminomethylation of ketones was achieved by adding N-nucleophiles. Preliminary mechanism studies suggest that the reaction mainly proceeds via a radical pathway.

Single-atom cobalt-fused biomolecule-derived nitrogen-doped carbon nanosheets for selective oxidation reactions

Non-noble metal single-atom catalysts hold great promise in selective oxidation reactions, although the progress is still unsatisfactory because of the synthesis challenge and the lack of mechanistic interpretations. Herein, we develop a biomolecule-based strategy to synthesize isolated Co single atom site catalysts by one-step pyrolysis of guanosine and Co precursors. Due to the abundant hydrogen bonding and π-π interaction of guanosine, the as-synthesized Co-N-C catalysts present a hierarchical porous two-dimensional (2D) nanostructure with an ultrahigh specific surface area, large pore volume, and high density of cobalt single atoms. Aberration-corrected electron microscopy and X-ray photoelectron spectroscopy reveal that Co species are present as isolated single sites and stabilized by nitrogen-doped carbon nanosheets. These characteristics make Co-GS-900 suitable as an efficient catalyst for selective oxidation of aromatic alkanes. For oxidation of ethylbenzene, Co-GS-900 exhibits a superior performance f with 91% conversion and 98% selectivity of acetophenone.

Direct intramolecular C(sp3)–H bond sulfonamidation to synthesize benzosultam derivatives under metal-free conditions

An efficient intramolecular C(sp3)–H bond amination under metal-free conditions has been developed to provide a straightforward method for the synthesis of 5-membered cyclic sulfonamides (benzosultams).

Mangana(iii/iv)electro-catalyzed C(sp3)-H azidation

Manganaelectro-catalyzed azidation of otherwise inert C(sp3)-H bonds was accomplished using most user-friendly sodium azide as the nitrogen-source. The operationally simple, resource-economic C-H azidation strategy was characterized by mild reaction conditions, no directing group, traceless electrons as the sole redox-reagent, Earth-abundant manganese as the catalyst, high functional-group compatibility and high chemoselectivity, setting the stage for late-stage azidation of bioactive compounds. Detailed mechanistic studies by experiment, spectrophotometry and cyclic voltammetry provided strong support for metal-catalyzed aliphatic radical formation, along with subsequent azidyl radical transfer within a manganese(iii/iv) manifold.

Bonding Energetics of Palladium Amido/Aryloxide Complexes in DMSO: Implications for Palladium-Mediated Aniline Activation

Thermodynamic knowledge of the metal-ligand (M-L) σ-bond strength is crucial to understanding metal-mediated transformations. Here, we developed a method for determining the Pd-X (X=OR and NHAr) bond heterolysis energies (ΔG_het (Pd-X)) in DMSO taking [(tmeda)PdArX] (tmeda=N,N,N',N'-tetramethylethylenediamine) as the model complexes. The ΔG_het (Pd-X) scales span a range of 2.6-9.0 kcal mol^-1 for ΔG_het (Pd-O) values and of 14.5-19.5 kcal mol^-1 for ΔG_het (Pd-N) values, respectively, implying a facile heterolytic detachment of the Pd ligands. Structure-reactivity analyses of a modeling Pd-mediated X-H bond activation reveal that the M-X bond metathesis is dominated by differences of the X-H and Pd-X bond strengths, the former being more influential. The ΔG_het (Pd-X) and pK_a (X-H) parameters enable regulation of reaction thermodynamics and chemoselectivity and diagnosing the probability of aniline activation with Pd-X complexes.

Direct Enantioselective C(sp3)-H Acylation for the Synthesis of α-Amino Ketones

A direct enantioselective acylation of α-amino C(sp³)-H bonds with carboxylic acids has been achieved via the merger of transition metal and photoredox catalysis. This straightforward protocol enables cross-coupling of a wide range of carboxylic acids, one class of feedstock chemicals, with readily available N-alkyl benzamides to produce highly valuable α-amino ketones in high enantioselectivities under mild conditions. The synthetic utility of this method is further demonstrated by gram scale synthesis and application to late-stage functionalization. This method provides an unprecedented solution to address the challenging stereocontrol in metallaphotoredox catalysis and C(sp³)-H functionalization. Mechanistic studies suggest the α-C(sp³)-H bond of the benzamide coupling partner is cleavage by photocatalytically generated bromine radicals to form α-amino alkyl radicals, which subsequently engages in nickel-catalyzed asymmetric acylation.

Direct C-H bond halogenation and pseudohalogenation of hydrocarbons mediated by high-valent 3d metal-oxo species

Late-stage direct functionalization of the C-H bond is synthetically desirable. Metalloenzymes having metal-oxo active sites are well known to selectively catalyze hydroxylation and halogenation reactions with high efficiency. This review highlights the recent developments in the field of direct C-H halogenation and pseudohalogenation reactions catalyzed by the functional models of metalloenzymes.

Access to Cycloalkeno[c]-Fused Pyridines via Pd-Catalyzed C(sp2)-H Activation and Cyclization of N-Acetyl Hydrazones of Acylcycloalkenes with Vinyl Azides

A novel Pd(II)-catalyzed vinylic C-H activation and cyclization has been developed, reacting a series of small, medium, and large N-acetyl hydrazones of acylcycloalkenes with vinyl azides to access diverse cycloalkeno[c]-fused pyridine scaffolds. This protocol provides progress in C(sp²)-H bond activation of medium to large cycloalkenes, and the target products can be obtained in a specific regioselectivity with good functional group tolerance and a broad substrate scope.

Direct C-H Borylation of Arenes Catalyzed by Saturated Hydride-Boryl-Iridium-POP Complexes: Kinetic Analysis of the Elemental Steps

The saturated trihydride IrH₃ {κ³ -P,O,P-[xant(PiPr₂ )₂ ]} (1; xant(PiPr₂ )₂ =9,9-dimethyl-4,5-bis(diisopropylphosphino)xanthene) activates the B-H bond of two molecules of pinacolborane (HBpin) to give H₂ , the hydride-boryl derivatives IrH₂ (Bpin){κ³ -P,O,P-[xant(PiPr₂ )₂ ]} (2) and IrH(Bpin)₂ {κ³ -P,O,P-[xant(PiPr₂ )₂ ]} (3) in a sequential manner. Complex 3 activates a C-H bond of two molecules of benzene to form PhBpin and regenerates 2 and 1, also in a sequential manner. Thus, complexes 1, 2, and 3 define two cycles for the catalytic direct C-H borylation of arenes with HBpin, which have dihydride 2 as a common intermediate. C-H bond activation of the arenes is the rate-determining step of both cycles, as the C-H oxidative addition to 3 is faster than to 2. The results from a kinetic study of the reactions of 1 and 2 with HBpin support a cooperative function of the hydride ligands in the B-H bond activation. The addition of the boron atom of the borane to a hydride facilitates the coordination of the B-H bond through the formation of κ¹ - and κ² -dihydrideborate intermediates.

Mechanistic Insight into Concerted Proton-Electron Transfer of a Ru(IV)-Oxo Complex: A Possible Oxidative Asynchronicity

We have thoroughly investigated the oxidation of benzyl alcohol (BA) derivatives by a Ru^IV(O) complex (Ru^IV(O)) in the absence or presence of Brønsted acids in order to elucidate the proton-coupled electron-transfer (PCET) mechanisms in C-H oxidation on the basis of a kinetic analysis. Oxidation of BA derivatives by Ru^IV(O) without acids proceeded through concerted proton-electron transfer (CPET) with a large kinetic isotope effect (KIE). In contrast, the oxidation of 3,4,5-trimethoxy-BA ((MeO)₃-BA) by Ru^IV(O) was accelerated by the addition of acids, in which the KIE value reached 1.1 with TFA (550 mM), indicating an alteration of the PCET mechanism from CPET to stepwise electron transfer (ET) followed by proton transfer (PT). Although the oxidized products of BA derivatives were confirmed to be the corresponding benzaldehydes in the range of acid concentrations (0-550 mM), a one-electron-reduction potential of Ru^IV(O) was positively shifted with increases in the concentrations of acids. The elevated reduction potential of Ru^IV(O) strongly influenced the PCET mechanisms in the oxidation of (MeO)₃-BA, changing the mechanism from CPET to ET/PT, as evidenced by the driving-force dependence of logarithms of reaction rate constants in light of the Marcus theory of ET. In addition, dependence of activation parameters on acid concentrations suggested that an oxidative asynchronous CPET, which is not an admixture of the CPET and ET/PT mechanisms, is probably operative in the boundary region (0 mM < [TFA] < 50 mM) involving a one-proton-interacted Ru^IV(O)···H⁺ as a dominant reactive species.

Experiments and Direct Dynamics Simulations That Probe η2-Arene/Aryl Hydride Equilibria of Tungsten Benzene Complexes

Key steps in the functionalization of an unactivated arene often involve its dihaptocoordination by a transition metal followed by insertion into the C-H bond. However, rarely are the η²-arene and aryl hydride species in measurable equilibrium. In this study, the benzene/phenyl hydride equilibrium is explored for the {WTp(NO)(PBu₃)} (Bu = n-butyl; Tp = trispyrazoylborate) system as a function of temperature, solvent, ancillary ligand, and arene substituent. Both face-flip and ring-walk isomerizations are identified through spin-saturation exchange measurements, which both appear to operate through scission of a C-H bond. The effect of either an electron-donating or electron-withdrawing substituent is to increase the stability of both arene and aryl hydride isomers. Crystal structures, electrochemical measurements, and extensive NMR data further support these findings. Static density functional theory calculations of the benzene-to-phenyl hydride landscape suggest a single linear sequence for this transformation involving a sigma complex and oxidative cleavage transition state. Static DFT calculations also identified an η²-coordinated benzene complex in which the arene is held more loosely than in the ground state, primarily through dispersion forces. Although a single reaction pathway was identified by static calculations, quasiclassical direct dynamics simulations identified a network of several reaction pathways connecting the η²-benzene and phenyl hydride isomers, due to the relatively flat energy landscape.

Direct functionalization of C-H bonds by electrophilic anions

Alkanes and [B₁₂X₁₂]^2- (X = Cl, Br) are both stable compounds which are difficult to functionalize. Here we demonstrate the formation of a boron-carbon bond between these substances in a two-step process. Fragmentation of [B₁₂X₁₂]^2- in the gas phase generates highly reactive [B₁₂X₁₁]^- ions which spontaneously react with alkanes. The reaction mechanism was investigated using tandem mass spectrometry and gas-phase vibrational spectroscopy combined with electronic structure calculations. [B₁₂X₁₁]^- reacts by an electrophilic substitution of a proton in an alkane resulting in a B-C bond formation. The product is a dianionic [B₁₂X₁₁C_nH_2n+1]^2- species, to which H⁺ is electrostatically bound. High-flux ion soft landing was performed to codeposit [B₁₂X₁₁]^- and complex organic molecules (phthalates) in thin layers on surfaces. Molecular structure analysis of the product films revealed that C-H functionalization by [B₁₂X₁₁]^- occurred in the presence of other more reactive functional groups. This observation demonstrates the utility of highly reactive fragment ions for selective bond formation processes and may pave the way for the use of gas-phase ion chemistry for the generation of complex molecular structures in the condensed phase.

Recent Advances on Copper-Catalyzed C–C Bond Formation via C–H Functionalization

Reactions that form C–C bonds are at the heart of many important transformations, both in industry and in academia. From the myriad of catalytic approaches to achieve such transformations, those relying on C–H functionalization are gaining increasing interest due to their inherent sustainable nature. In this short review, we showcase the most recent advances in the field of C–C bond formation via C–H functionalization, but focusing only on those methodologies relying on copper catalysts. This coinage metal has gained increased popularity in recent years, not only because it is cheaper and more abundant than precious metals, but also thanks to its rich and versatile chemistry.

1 Introduction

2 Cross-Dehydrogenative Coupling under Thermal Conditions

2.1 C(sp3)–C(sp3) Bond Formation

2.2 C(sp3)–C(sp2) Bond Formation

2.3 C(sp2)–C(sp2) Bond Formation

2.4 C(sp3)–C(sp) Bond Formation

3 Cross-Dehydrogenative Coupling under Photochemical Conditions

3.1 C(sp3)–C(sp3) Bond Formation

3.2 C(sp3)–C(sp2) and C(sp3)–C(sp) Bond Formation

4 Conclusion and Perspective

Ruthenium-catalyzed, site-selective C-H activation: access to C5-substituted azaflavanone

A site-selective ruthenium-catalyzed keto group assisted C–H bond activation of 2-aryl tetrahydroquinoline (azaflavanone) derivatives has been achieved with a variety of alkenes for the first time. A wide range of substrates was utilized for the synthesis of a wide variety of alkenylated azaflavanones. This simple and efficient protocol provides the C5-substituted azaflavanone derivatives in high yields with a broad range of functional group tolerance. Further, the C5-alkenylated products were converted into substituted 2-aryl quinoline derivatives in good yields.

A site-selective ruthenium-catalyzed keto group assisted C–H bond activation of 2-aryl tetrahydroquinoline (azaflavanone) derivatives has been achieved with a variety of alkenes for the first time.

Rationalizing the AlI -Promoted Oxidative Addition of C-C Versus C-H Bonds in Arenes

The factors controlling the oxidative addition of C-C and C-H bonds in arenes mediated by Al^I have been computationally explored by means of Density Functional Theory calculations. To this end, we compared the processes involving benzene, naphthalene and anthracene which are promoted by a recently prepared anionic Al^I -carbenoid. It is found that this species exhibits a strong tendency to oxidatively activate C-H bonds over C-C bonds, with the notable exception of benzene, where the C-C bond activation is feasible but only under kinetic control reaction conditions. State-of-the-art computational methods based on the combination of the Activation Strain Model of reactivity and the Energy Decomposition Analysis have been used to rationalize the competition between both bond activation reactions as well as to quantitatively analyze in detail the ultimate factors controlling these transformations.

IrIII -Catalyzed Selective ortho-Monoiodination of Benzoic Acids with Unbiased C-H Bonds

An iridium-catalyzed selective ortho-monoiodination of benzoic acids with two equivalent C-H bonds is presented. A wide range of electron-rich and electron-poor substrates undergo the reaction under mild conditions, with >20:1 mono/di selectivity. Importantly, the C-H iodination occurs selectively ortho to the carboxylic acid moiety in substrates bearing competing coordinating directing groups. The reaction is performed at room temperature and no inert atmosphere or exclusion of moisture is required. Mechanistic investigations revealed a substrate-dependent reversible C-H activation/protodemetalation step, a substrate-dependent turnover-limiting step, and the crucial role of the AgI additive in the deactivation of the iodination product towards further reaction.

A site-selective amination catalyst discriminates between nearly identical C-H bonds of unsymmetrical disubstituted alkenes

C-H activation reactions enable chemists to unveil new retrosynthetic disconnections and streamline conventional synthetic approaches. A long-standing challenge in C-H activation is the inability to distinguish electronically and sterically similar C-H bonds. Although numerous synergistic combinations of transition-metal complexes and chelating directing groups have been utilized to distinguish C-H bonds, undirected regioselective C-H functionalization strategies remain elusive. Here we report a regioselective C-H activation/amination reaction of various unsymmetrical dialkyl-substituted alkenes. The regioselectivity of C-H activation is correlated to the electronic properties of allylic C-H bonds indicated by the corresponding 1JCH coupling constants. A linear relationship between the difference in the 1JCH coupling constants of the two competing allylic C-H bonds (Δ1JCH) and the C-H activation barriers (ΔΔG‡) has also been determined.

Carbonyl-Photoredox/Metal Dual Catalysis: Applications in Organic Synthesis

Photoredox/metal dual catalysis is a versatile tandem methodology to construct carbon–carbon and carbon–heteroatom bonds. The focus of this short review is the application of this technology to C(sp3)–C(sp3), C(sp3)–C(sp2), C(sp2)–C(sp2), C(sp2)–O, and C(sp3)–O bond formation induced by readily available and inexpensive carbonyl complexes as single electron transfer agents, photosensitizers, or hydrogen atom transfer agents.

1 Introduction

2 Homocoupling of Aryl Halides

3 Functionalization of C(sp3)–H Bonds

3.1 Dehydrogenation of Alkanes

3.2 Arylation/Alkylation

3.3 Carboxylation

3.4 Acylation

3.5 Hydroalkylation of Olefins

3.6 Hydroalkylation of Imines

4 Benzoylation of Aryl Bromides

5 Aryl Esterification

6 Oxidation of β-Keto Esters

7 Conclusions and Future Outlook

C-H Bond Activation by an Imido Cobalt(III) and the Resulting Amido Cobalt(II) Complex

The 3d-metal mediated nitrene transfer is under intense scrutiny due to its potential as an atom economic and ecologically benign way for the directed amination of (un)functionalised C-H bonds. Here we present the isolation and characterisation of a rare, trigonal imido cobalt(III) complex, which bears a rather long cobalt-imido bond. It can cleanly cleave strong C-H bonds with a bond dissociation energy of up to 92 kcal mol-1 in an intermolecular fashion, unprecedented for imido cobalt complexes. This resulted in the amido cobalt(II) complex [Co(hmds)2 (NHt Bu)]- . Kinetic studies on this reaction revealed an H atom transfer mechanism. Remarkably, the cobalt(II) amide itself is capable of mediating H atom abstraction or stepwise proton/electron transfer depending on the substrate. A cobalt-mediated catalytic application for substrate dehydrogenation using an organo azide is presented.