Ingestion of Nanoplastics and Microplastics by Pacific Oyster Larvae

Aquatic toxicity of chemically defined microplastics can be explained by functional additives

A novel, systematic approach to relate plastic toxicity with chemical composition is undertaken. Using industrial methods, three petroleum-based polymers, low-density polyethylene (PE), polyvinyl chloride (PVC), and polyamide (PA), and the biopolymer polyhydroxybutyrate (PHB) were manufactured in different formularies including conventional and alternative additives, and microplastics of two sizes (<250 and <20 µm) were obtained with the aim to relate their composition with environmental impact in aquatic environments. Internationally accepted standard tests of regulatory use with marine organisms representative of microalgae (Tisochrysis lutea population growth), crustaceans (Acartia clausi larval survival), and echinoderms (Paracentrotus lividus sea-urchin embryo test) support the following conclusions. Aquatic toxicity of microplastics made from conventional oil-based polymers is due to leaching of chemical additives, and not to ingestion of microplastics. Use of alternative formulations based on natural rather than synthetic chemical additives did not consistently reduce aquatic toxicity except for the replacement of triclosan by the alternative biocide lawsone. In contrast, the biopolymer tested, PHB, seemed to impact marine plankton through different mechanisms associated to the higher abundance of plastic particles within the nanometric range found in this resin and absent in other materials.

Analysis of small microplastics in coastal surface water samples of the subtropical island of Okinawa, Japan

Marine plastic debris is widely recognized as a global environmental issue. Small microplastic particles, with an upper size limit of 20 μm, have been identified as having the highest potential for causing damage to marine ecosystems. Having accurate methods for quantifying the abundance of such particles in a natural environment is essential for defining the extent of the problem they pose. Using an optical micro-Raman tweezers setup, we have identified the composition of particles trapped in marine aggregates collected from the coastal surface waters around the subtropical island of Okinawa. Chemical composition analysis at the single-particle level indicates dominance by low-density polyethylene, which accounted for 75% of the small microplastics analysed. The smallest microplastics identified were (2.53 ± 0.85) μm polystyrene. Our results show the occurrence of plastics at all test sites, with the highest concentration in areas with high human activities. We also observed additional Raman peaks on the plastics spectrum with decreasing debris size which could be related to structural modification due to weathering or embedding in organic matter. By identifying small microplastics at the single-particle level, we obtain some indication on their dispersion in the ocean which could be useful for future studies on their potential impact on marine biodiversity.

Full size microplastics in crab and fish collected from the mangrove wetland of Beibu Gulf: Evidences from Raman Tweezers (1-20 μm) and spectroscopy (20-5000 μm)

Microplastic pollution in organisms is a growing environmental concern worldwide. Current methods to identify microplastics (MPs) are subject to the limitations of analytical techniques, and there is no full-scale method to measure MPs in organisms. In this study, Raman Tweezers and spectroscopy methods were combined and applied to identify MPs in organisms within the size range of 1-5000 μm. The abundance of small MPs (1-20 μm) was measured in crab (0.39-2.83 items/individual) and fish (0.35-3.22 items/individual). Most MPs were transparent in color and pellet shape. The proportion of small MPs (1-20 μm) was 35.77%, and analysis revealed the non-inclusion of this fraction will induce large deviations in the overall measurement. The large MPs (20-5000 μm) were identified in crab and fish with abundances ranging from 0.74-4.96 items/individual and 0.72-5.39 items/individual, respectively. Mainly fiber shape items were detected, the dominant particle size ranged from 20 to 100 μm, and most MPs were white. Polyethylene (PE) and polyethylene terephthalate (PET) were the main types of MPs polymers detected. Our study fills the gap to provide a new method to detect MPs in organisms below 20 μm, facilitating study of the migration and transformation of small MPs in the environment.

Reproductive toxicity of polystyrene microplastics: In vivo experimental study on testicular toxicity in mice

Microplastics (MPS) are widespread in our environment and have a potential impact on the reproductive development of humans and mammals. In this study, we evaluated the effect of 5 µm polystyrene microplastics(PS-MPS) on spermatogenesis in mice. The damage by PS-MPS to epididymal sperm was studied using blood cell counts. The results showed that the number of viable epididymis sperm after PS-MPS exposure was significantly reduced. Using Duff-Quik staining, we found that the PS-MPS exposure increased the rate of sperm deformity. The testis is an important organ responsible for normal spermatogenesis. HE and TUNEL staining showed atrophy, shedding, and apoptosis of sperm cells at all levels of the testis after exposure to PS-MPS. Western blot and qPCR analysis were used to detect Nrf2/HO-1 and NF-κB. The results showed that after PS-MPS exposure, the expression of the pro-inflammatory molecule NF-κB and that of the inflammatory factors interleukin (IL)-1β and IL-6 increased significantly, whereas that of the anti-inflammatory molecule Nrf2/HO-1 decreased. These results indicate that the abnormal sperm quality in ICR mice caused by PS-MPS exposure is closely related to the Nrf2/HO-1/NF-κB pathway.

Enhanced alteration of poly(vinyl chloride) microplastics by hydrated electrons derived from indole-3-acetic acid assisted by a common cationic surfactant

In this study, a new photo-irradiated reductive dechlorination pathway and the underlying transformation mechanism are described for poly(vinyl chloride) microplastics (PVC-MPs). PVC-MPs underwent photo-reductive dechlorination process with the release of chloride ions. This reaction could be facilitated in the presence of indole-3-acetic acid (IAA) and hexadecyltrimethylammonium bromide (CTAB) under neutral pH and simulated sunlight irradiation conditions. Electrostatic interaction between IAA and CTAB produced neutral IAA/CTAB complex, which might account for the enhanced adsorption of IAA on PVC powders. Upon photo-irradiation, the adsorbed IAA was excited to generate hydrated electrons (e_aq^-), which could pass through a shorter distance to PVC-MP surface than that derived from homogeneous IAA molecules in aqueous solution. Transient spectra of laser flash photolysis provided direct evidence for the generation of e_aq^-, which supported the proposed dechlorination mechanism. Based on the results of attenuated total reflectance/Fourier transform infrared (ATR/FTIR) and Raman spectra, C-Cl bond cleavage and polyene formation were involved in the structural transformation of PVC-MPs. Due to the hydrophobic effects and π-π interactions between aromatic rings and polyene structures in PVC-MP surface, the PVC-MP powders irradiated in the presence of IAA/CTAB showed an enhanced sorption for both hydrophobic and hydrophilic aromatic chemicals.

Microplastics and metal burdens in freshwater Tilapia (Oreochromis niloticus) of a metropolitan reservoir in Central Mexico: Potential threats for human health

In the present study, microplastics (MPs) and metal concentrations were studied in the widely consumed tilapia (Oreochromis niloticus) fishes (n = 15) collected from a metropolitan reservoir of the Atoyac River basin, Mexico. Nearly 139 fibers were extracted from the gastrointestinal tracts and assessed using optical microscopy to evaluate their physical characteristics. The colour distribution of the fibers was mainly black (40%), blue (19%), red and white (14%). SEM images represented the surface morphology, while the elemental composition of the fibers was studied using EDX spectra. Polymer characterization using μFTIR aided in confirming the fibers as plastics (polyamide, polyester, and synthetic cellulose) and non-plastics (natural cellulose). Henceforth, ∼33% of the fibers, provisionally thought to be plastics, were natural fibers. The total metal concentrations were higher in the liver (259.24 mg kg^-1) than the muscle (122.56 mg kg^-1) due to diverse metabolic functions in the hepatic tissues. Human health risk assessment in terms of Hazard Index (HI) presented Pb and Zn values above unity in both adults and children, prompting regulatory measures. Statistical tests between MPs and fish biometry did not present any substantial correlations. The present study also affirmed that the presence of MPs and metals in fishes of a highly contaminated region is not only governed by their bioavailabilities, but also on the physiological characteristics of the individual organism.

PET nanoplastics interactions with water contaminants and their impact on human cells

In recent years, many studies are focusing on the negative effects of plastic pollution, and in particular on the nanosized plastic fragments and their implications on the environment and human health. Nanoplastics in the environment interact with a great number of substances, many of which are dangerous to humans, but the interaction mechanisms, the complexes formation processes, and their biological impact are still poorly understood. Here we report a study on the interactions of polyethylene terephthalate nanoplastics, produced by laser ablation, with three different types of contaminants: glyphosate, levofloxacin and Hg²⁺ ions, and we demonstrate that the nanoplastics form complexes with all three contaminants through their favorable binding. Most importantly, this study highlights that to demonstrate the overall effect of the nanoplastics internalized by cells in vitro, it is important to combine alternative methodologies, such as metabolomics, with standard biological assays (i.e., cell viability and ROS production). In this way it becomes possible to better understand the body's response to this new class of pollutants and their possible chronic toxicity. Summary: PET nanoplastics, fabricated by laser ablation, interact with aqueous pollutants forming nanoclusters. The nanoclusters affect the cells metabolism, suggesting long-term risks.

Physiological effects of plastic particles on mussels are mediated by food presence

Plastic particles cause toxic effects on marine organisms but whether food particles can affect the toxic effects of plastic particles on filter feeding animals remains unknown. To evaluate the intake and physiological effects of different size particles and their exposure ways, the thick shell mussels Mytilus coruscus were exposed to polystyrene (PS) nanoplastics (NPs, 70 nm) and microplastics (MPs, 10 µm) respectively for two weeks by mixing NPs/MPs with microalgae or exposed to MNPs individually after feeding. Intake of particles and their physiological effects including energy budget, digestive enzymes and oxidative responses were assessed after exposure. Results indicated food presence mediate the effects while MPs decrease the energy budget and increase the catalase activity and malondialdehyde levels. Moreover, exposure way significantly affected energy budget and size of particle had a significant impact on enzyme activities. Our results showed MPs induce more significant effects than NPs on mussels, emphasized the importance of particle exposure way and suggested that mixture exposure with microalgae alleviate the influences on mussels caused by plastic particles alone. This study emphasized that we need to take the food particles into account for evaluating the toxic effects of plastic particles on filter feeding animals in the natural environment.

"The Good, the Bad and the Double-Sword" Effects of Microplastics and Their Organic Additives in Marine Bacteria

Little is known about the direct effects of microplastics (MPs) and their organic additives on marine bacteria, considering their role in the nutrient cycles, e.g., N-cycles through the N₂-fixation, or in the microbial food web. To fill this gap of knowledge, we exposed marine bacteria, specifically diazotrophs, to pure MPs which differ in physical properties (e.g., density, hydrophobicity, and/or size), namely, polyethylene, polypropylene, polyvinyl chloride and polystyrene, and to their most abundant associated organic additives (e.g., fluoranthene, 1,2,5,6,9,10-hexabromocyclododecane and dioctyl-phthalate). Growth, protein overproduction, direct physical interactions between MPs and bacteria, phosphorus acquisition mechanisms and/or N₂-fixation rates were evaluated. Cyanobacteria were positively affected by environmental and high concentrations of MPs, as opposed to heterotrophic strains, that were only positively affected with high concentrations of ~120 μm-size MPs (detecting the overproduction of proteins related to plastic degradation and C-transport), and negatively affected by 1 μm-size PS beads. Generally, the organic additives had a deleterious effect in both autotrophic and heterotrophic bacteria and the magnitude of the effect is suggested to be dependent on bacterial size. Our results show species-specific responses of the autotrophic and heterotrophic bacteria tested and the responses (beneficial: the “good,” deleterious: the “bad” and/or both: the “double-sword”) were dependent on the type and concentration of MPs and additives. This suggests the need to determine the threshold levels of MPs and additives concentrations starting from which significant effects can be observed for key microbial populations in marine systems, and these data are necessary for effective environmental quality control management.

The combined exposure of microplastics and toxic contaminants in the floodplains of north India: A review

Microplastics in aquatic ecosystem are an emerging environmental threat, primarily aggregating into sediments and living biota besides providing active transportation to toxic pollutants. Recent studies have revealed that a microplastic surface cannot be considered as "inert" and therefore the rate and stage of degradation of microplastic will determine its capability in adsorbing and transporting the solute to longer distances. Our concern is driven by the fact that there has been an absence of widescale research in India despite a country with one of the longest networks of rivers and a 7500 km long active coastline. Anthropogenic pollutants are expected to increase and the situation will further worsen when more persistent organic pollutants (POCs) and geogenic contaminants will find its sink via monsoon runoff. Studies on aquatic species including COD, daphnia magna and zebrafish suggest strong links of bio-accumulation, suspecting to a more serious situation for the coastal India where there is an almost three times increase in the density of the microplastics as the monsoon progresses. Evidences also suggests that microplastics can adsorb known carcinogens as well as endocrine disrupting chemicals leaving our aquatic life exposed to higher mortality. Our review is a first ever scientific attempt in compiling these evidences through researches done in this field to understand the risk that the major floodplains of North India are currently facing. We have adapted the theories and inferences of the available research to predict and postulate a probable mechanism that could explain the severity of the situation in India.

Distribution and removal characteristics of microplastics in different processes of the leachate treatment system

Microplastics (MPs) in environments are widely concerned in recent years due to the widely occurrence and potential risk to environments. With a large amount of plastic waste discarded into the landfills, leachate generated from landfills was found to be an important pollution source of MPs. However, the removal efficiency and characteristics of MPs in leachate treatment system were not clear. In this study, the concentration variation and the removal performance of MPs in leachate treatment system with the process of pretreatment + biotreatment + advanced treatment were investigated. The results showed that 58.33% of MPs were removed during the leachate treatment process. The Ultrafiltration had the highest efficiency of removing MPs, but the advanced treatment technologies (Nanofiltration and Reverse Osmosis) did not contribute to the removal of MPs. Furthermore, the removal performance of MPs in leachate treatment process was determined by MPs properties, such as size, shape and polymer type. The whole leachate treatment process had higher removal efficiencies for particle MPs compared to fiber MPs, and only 50% of fiber MPs were removed in biological treatment and advanced treatment. Ultrafiltration had better removal effect on microplastics with the size of less than 1 mm, and MPs less than 0.5 mm were almost removed by advanced treatment but accumulated in the sludge with the abundance of 0.893 ± 0.252 items/g. The results showed that a considerable amount of MPs (10⁶ items/day) discharged with the effluent (3200 t/d), and most removed MPs from leachate accumulated in sludge, which would cause potential risk to the environments.

Toxic effects of exposure to microplastics with environmentally relevant shapes and concentrations: Accumulation, energy metabolism and tissue damage in oyster Crassostrea gigas

Microplastics (MPs) are widely found in coastal areas and oceans worldwide. The MPs are environmentally concerning due to their bioavailability and potential impacts on a wide range of marine biota, so assessing their impact on the biota has become an urgent research priority. In the present study, we exposed Crassostrea gigas oysters to irregular MPs of two polymer types (polyethylene (PE) and polyethylene terephthalate (PET)) at concentrations of 10 and 1000 μg L^-1 for 21 days. Accumulation of MPs, changes in metabolic enzyme activity, and histological damage were evaluated, and metabolomics analysis was conducted. Results demonstrated that PE and PET MPs were detected in the gills and digestive gland following exposure to both tested concentrations, confirming ingestion of MPs by the organisms. Moreover, both PE and PET MPs inhibited lipid metabolism, while energy metabolism enzyme activities were activated in the oysters. Histopathological damage of exposed oysters was also observed in this study. Integrated biomarker response (IBR) results showed that MPs toxicity increased with increasing MPs concentration, and the toxic effects of PET MPs on oysters was greater than PE MPs. In addition, metabolomics analysis suggested that MPs exposure induced alterations in metabolic profiles in oysters, with changes in energy metabolism and inflammatory responses. This study reports new insights into the consequences of MPs exposure in marine bivalves at environmentally relevant concentrations, providing valuable information for ecological risk assessment of MPs in a realistic conditions.

Parental and trophic transfer of nanoscale plastic debris in an assembled aquatic food chain as a function of particle size

The existing limitations in analytical techniques for characterization and quantification of nanoscale plastic debris (NPD) in organisms hinder understanding of the parental and trophic transfer of NPD in organisms. Herein, we used iron oxide-doped polystyrene (PS) NPD (Fe-PS-NPD) of 270 nm and Europium (Eu)-doped PS-NPD (Eu-PS-NPD) of 640 nm to circumvent these limitations and to evaluate the influence of particle size on the trophic transfer of NPD along an algae-daphnids food chain and on the reproduction of daphnids fed with NPD-exposed algae. We used Fe and Eu as proxies for the Fe-PS-NPD and Eu-Ps-NPD, respectively. The algae cells (Pseudokirchinella subcapitata) were exposed to 4.8 × 10¹⁰ particles/L of Fe-PS-NPD or Eu-PS-NPD for 72 h. A high percentage (>60%) of the NPD was associated with algal cells. Only a small fraction (<11%) of the NPD, however, was transferred to daphnids fed for 21 days on the NPD-exposed algae. The uptake and trophic transfer of the 270 nm Fe-PS-NPD were higher than those for the 640 nm Eu-PS-NPD, indicating that smaller NPD are more likely to transfer along food chains. After exposure to Fe-PS-NPD, the time to first brood was prolonged and the number of neonates per adult significantly decreased compared to the control without any exposure and compared to daphnids exposed to the Eu-Ps-NPD. The offspring of daphnids exposed to Eu-PS-NPD through algae, showed a traceable concentration of Eu, suggesting that NPD are transferred from parents to offspring. We conclude that NPD can be transferred in food chains and caused reproductive toxicity as a function of NPD size. Studies with prolonged exposure and weathered NPD are endeavored to increase environmental realism of the impacts determined.

Developmental toxicity of plastic leachates on the sea urchin Paracentrotus lividus

Microplastic pollution has become ubiquitous, affecting a wide variety of biota. Although microplastics are known to alter the development of a range of marine invertebrates, no studies provide a detailed morphological characterisation of the developmental defects. Likewise, the developmental toxicity of chemicals leached from plastic particles is understudied. The consequences of these developmental effects are likely underestimated, and the effects on ecosystems are unknown. Using the sea urchin Paracentrotus lividus as a model, we studied the effects of leachates of three forms of plastic pellet: new industrial pre-production plastic nurdles, beached pre-production nurdles, and floating filters, known as biobeads, also retrieved from the environment. Our chemical analyses show that leachates from beached pellets (biobead and nurdle pellets) and highly plasticised industrial pellets (PVC) contain polycyclic aromatic hydrocarbons and polychlorinated biphenyls, which are known to be detrimental to development and other life stages of animals. We also demonstrate that these microplastic leachates elicit severe, consistent and treatment-specific developmental abnormalities in P. lividus at embryonic and larval stages. Those embryos exposed to virgin polyethylene leachates with no additives nor environmental contaminants developed normally, suggesting that the abnormalities observed are the result of exposure to either environmentally adsorbed contaminants or pre-existing industrial additives within the polymer matrix. In the light of the chemical contents of the leachates and other characteristics of the plastic particles used, we discuss the phenotypes observed during our study, which include abnormal gastrulation, impaired skeletogenesis, abnormal neurogenesis, redistribution of pigmented cells and embryo radialisation.

Effect of polyethylene particles on dibutyl phthalate toxicity in lettuce (Lactuca sativa L.)

The effects of dibutyl phthalate (DBP) on the toxicity and edible quality (e.g., soluble proteins, soluble sugars, and vitamin C) of green and purple lettuce in the presence of polyethylene (PE) fragments were evaluated. The results revealed that PE treatment for 28 days decreased DBP and monobutyl phthalate content in lettuce roots and leaves, but enhanced the inhibitory effects of DBP on root growth and activity, reduced soluble protein and sugar content in lettuce leaves, and increased vitamin C content in lettuce leaves. Scanning and transmission electron microscopies revealed that PE only adhered to the root surface and did not enter the lettuce roots. Moreover, separation of the cell wall was aggravated in lettuce roots treated with DBP+PE, but not in lettuce treated with individual DBP or PE, and even led to the expansion of endoplasmic reticulum vesicles and cell rupture. Gaussian analysis indicated that PE interacted with DBP molecules through van der Waals interactions, which decreased DBP transport from the culture solution into the lettuce roots. In addition, purple lettuce was more sensitive to exogenous pollutants than green lettuce. This study provides new insights for food safety related to DBP fate and toxicity under PE stress.

Minimal impact at current environmental concentrations of microplastics on energy balance and physiological rates of the giant mussel Choromytilus chorus

Microplastic particles (MP) uptake by marine organisms is a phenomenon of global concern. Nevertheless, there is scarce evidence about the impacts of MP on the energy balance of marine invertebrates. We evaluated the mid-term effect of the microplastic ingestion at the current higher environmental concentrations in the ocean on the energy balance of the giant mussel Choromytilus chorus. We exposed juvenile mussels to three concentrations of microplastics (0, 100, and 1000 particles L^-1) and evaluated the effect on physiology after 40 days. The impacts of MP on the ecophysiological traits of the mussels were minimum at all the studied concentrations. At intermediate concentrations of MP, Scope for Growth (SFG) had little impact. Other relevant key life-history and physiological processes, such as size and metabolism, were not affected by microplastics. However, individuals treated with MP presented histopathological differences compared to control group, which could result in adverse health effects for mussels.

Microplastics and their associated organic pollutants from the coastal waters of the central Adriatic Sea (Italy): Investigation of adipogenic effects in vitro

Even though microplastic (MP) pollution in aquatic environment is nowadays widely studied, a huge gap of knowledge exists on their actual biological effects. In this study we first reported environmental baseline data on the occurrence and characterization of floating MPs in Italian coastal waters of the Central Adriatic Sea by using a standardized monitoring protocol. Further, we analyzed the concentrations of MP-associated chemicals and evaluated their potential adipogenic effects using 3T3-L1 preadipocytes. MPs were found in each sampling stations showing the highest abundance (1.88 ± 1.78 items/m³) in the sites more distant from the coast with fragments as the most common shape category. All targeted organic pollutants (i.e. polychlorinated biphenyls - PCBs, polycyclic aromatic hydrocarbons -PAHs, organophosphorus - OP, and organochlorine - OC pesticides) have been detected on the surface of the collected MPs. The highest concentrations of PAHs were found on MPs from inshore (i.e. <1.5 NM) surface waters with low-ring PAHs as dominant components. Similarly, MPs from inshore waters had higher ΣPCB concentrations (64.72 ng/g plastic) than those found in offshore (i.e. >6 NM) waters (10.37 ng/g plastic). Among pesticides, all measured OPs were detected in each sample analyzed with pirimiphos-methyl as the most representative compound. For OCs, the sum of all concentrations of congeners was higher in coastal with respect to offshore waters. Moreover, in vitro 3T3-L1 screening of MP extracts indicated potential metabolic effects resulting in both adipogenesis and lipid uptake/storage.

The gut retention time of microplastics in barnacle naupliar larvae from different climatic zones and marine habitats

Microplastic ingestion has been widely documented in marine zooplankton, but the retention time of microplastics in their digestive gut are still poorly studied, especially among species from different climatic zones and marine habitats. This study evaluated the ingestion and gut retention time of four sizes of fluorescent microplastic beads (1.3, 7.3, 10.6, and 19.0 μm) in stage II naupliar larvae of nine barnacle species from different habitats (epibiotic on turtles, mangroves, coral reefs, and rocky shores) and climatic zones (subtropical/tropical and temperate). Microbeads were not lethal to all species (climatic zones/habitats) tested from the four sizes of non-fluorescent virgin microbeads (1.7, 6.8, 10.4 and 19.0 μm, each at concentrations 1, 10, 100, and 1000 beads mL^-1). Gut retention time of microplastic beads in barnacle naupliar larvae significantly increased with decreasing size. Microbeads resided in digestive tracts generally 3-4 times longer in rocky shore and coral reef barnacles than in muddy shore and epibiotic ones. However, species from different climatic zone did not differ in retention time. Our results suggested nauplius larvae from rocky shore and coral reef barnacles appear to be more susceptible to the impacts of longer retained microplastics (e.g., toxic chemicals present on the surface).

Characterization of microplastics and anthropogenic fibers in surface waters of the North Saskatchewan River, Alberta, Canada

Microplastics are globally ubiquitous contaminants, but quantitative data on their presence in freshwater environments are sparse. This study investigates the occurrence, composition, and spatial trends of microplastic contamination in the North Saskatchewan River flowing through Edmonton, Alberta, the fifth largest city in Canada. Surface water samples were collected from seven sites throughout the city, upstream and downstream of the city, and near potential point sources (i.e., a wastewater treatment plant). Samples were spiked with fluorescent microbeads as internal standards and extracted by wet peroxide oxidation and density floatation. Microplastics were found in all samples, ranging in concentration from 4.6 to 88.3 particles·m−3 (mean = 26.2 ± 18.4 particles·m−3). Fibers were the dominant morphology recovered, and most were of anthropogenic origin and chemically identified as dyed cotton or polyester by Raman microspectroscopy. The majority of fragments were identified as polyethylene or polypropylene. No upstream to downstream differences were found in concentration, size distribution, or morphological composition suggesting nonpoint sources of microplastics to the river. This study represents one of the first investigations into the occurrence of microplastics in the freshwater environment in western Canada and will provide a baseline for future studies.

Challenge for the detection of microplastics in the environment

As an emerging contaminant in the environment, microplastics have attracted worldwide attention. Although research methods on microplastics in the environment have been reported extensively, the data on microplastics obtained cannot be comparable due to different methods. In this work, we critically reviewed the analytical methods of microplastics, including sample collection, separation, identification, and quantification. Manta trawl and tweezers or cassette corers are used to collect water samples and sediments, respectively. For biota sample, internal organs need to be dissected and separated to obtain microplastics. Density differences are often used to separate microplastics from the sample matrix. Visual classification is one of the most common methods for identifying microplastics, and it can be better detected by combining it with other instruments. However, they are not suitable for detection nanoplastics, which may lead to underestimation of risk. The abundance of microplastics varies with the detection method. Thus, the analytical methods for microplastics need to be standardized as soon as possible. Meanwhile, new methods for analyzing nanoplastics are urgently needed. PRACTITIONER POINTS: Sampling, separation, identification, and quantification are important procedures. The sampling and separation methods for microplastics need to be standardized. The organic matter can be removed by digestion to facilitate identification. Combine microscope with analytical instruments to better identify microplastics. There is still a challenge to quantification of smaller-sized plastic particles.

Adsorption of ciprofloxacin to functionalized nano-sized polystyrene plastic: Kinetics, thermochemistry and toxicity

Plastic debris is ubiquitous in aquatic systems and has been proven vehicles for the transport of various pollutants including trace organic compounds. Nanoplastics have large specific surface area and hydrophobic characteristics and therefore are capable of adsorbing other organic or inorganic chemicals from the environment. Antibiotics, as another class of emerging contaminants, have raised significant research concern in recent years as they pose threats to the ecosytems and human health. Nevertheless, little information is available on the adsorption behaviors of antibiotics onto nano-sized plastics. The toxicity of combined nanoplastics and antibiotics is also largely unknown. In this study, the physicochemical and thermodynamic interactions between representative nanoplastics, which containing a carboxyl functional group of polystyrene nanoplastics (PS-COOH), and typical antibiotic, i.e., ciprofloxacin (CIP) were investigated in a batch adsorption experiment. The specific thermodynamic correlation function of PS-COOH combined with CIP was obtained through isothermal titration microcalorimetry (ITC) analysis. The adsorption kinetics and isotherm of CIP on PS-COOH closely fit the pseudo-second-order kinetic model (r² = 0.99) and Freundlich isotherm (r² = 0.99). The ITC results showed that the adsorption reaction of PS-COOH with CIP was a spontaneous exothermic reaction. The adsorption of antibiotics on nanoplastics may aggravate the negative impacts of these two pollutants on aqueous ecosystems, and we hypothesized that would be reflected in the survival rate of model organism of Caenorhabditis elegans when exposed to this combination. This work used a mechanistic approach to unravel the adsorption behavior of antibiotics on nanoplastics and shed light on their potential impact on aquatic ecosystems.

Toxicity and biomarkers of micro-plastic in aquatic environment: a review

Microplastics (MPs; <5 mm) are found in all aquatic environments. Due to harmful impacts, MPs pose a great threat to the aquatic ecology. Therefore, this review aims to provide an overview of the risk, bioavailability, and toxicity of MPs in aquatic organisms. Various factors affecting MPs bioavailability and level of risks at cellular and molecular level on aquatic organisms are comprehensively discussed. More specifically biomarkers for antioxidant response (superoxide dismutase, catalase, glutathione peroxidase, reductase, and glutathione S-transferase), neurotoxic impairment (acetylcholinesterase), lysosomal activity alteration, and genotoxicity have been discussed in detail. Biomarkers are powerful tool in the monitoring programme, but the collection of literature on biomarkers for MPs is limited. Thus, here we demonstrate how to evaluate MPs impact, in monitoring programme, on organisms using biomarkers in aquatic environment. This review would broaden the existing knowledge on the toxic effect and biomarkers of MPs and offer research priorities for future studies.

Currently monitored microplastics pose negligible ecological risk to the global ocean

Given the rise in plastic production, microplastics (MP) dominate marine debris, and their impact on marine ecosystems will likely increase. However a global quantitative assessment of this risk is still lacking. We conducted an ecological risk assessment of MP in the global ocean by comparing the thresholds of biological effects with the probability of exposure to those concentrations, according to plastic density data adjusted to a log-normal distribution. Levels of MP from 100 to 5000 µm span from < 0.0001 to 1.89 mg/L, whereas the most conservative safe concentration is 13.8 mg/L, and probability of exposure is p = 0.00004. Therefore large MP pose negligible global risk. However, MP bioavailability, translocation and toxicity increase as size decreases, and particles < 10 µm are not identified by current monitoring methods. Future research should target the lowest size fractions of MP and nanoplastics, and use in toxicity testing environmental plastic particles rather than engineered materials.

Interactions between microplastics and organic pollutants: Effects on toxicity, bioaccumulation, degradation, and transport

Microplastics (MPs), defined as particles with diameters <5 mm and including nanoplastics (NPs), with diameters <1 μm, are characterized by large specific surface areas and hydrophobicity. In aquatic and terrestrial environments, MPs interact with co-occurring organic pollutants through sorption and desorption, which alters the environmental behavior of the pollutants, such as their toxicity, bioaccumulation, degradation, and transport. In this review, we summarize the results of current studies of the interactions between MPs and organic contaminants, and focus on the different mechanisms and subsequent ecological risks of contaminant transfer among environmental media, MPs and organisms. The sorption/desorption of organic pollutants on/from MPs is discussed with respect to solution conditions and the properties of both the MPs and the pollutants. More importantly, the ability of MPs to alter the toxicity, bioaccumulation, degradation, and transport of organic pollutants through these interactions is considered as well. We then examine the interrelationships of the different environmental behaviors of MPs and organic pollutants and the roles played by environmental processes. Finally, we identify the remaining knowledge gaps that must be filled in further studies in order to accurately evaluate the environmental risks of MPs and their associated organic pollutants.

Particle Size and Pre-Treatment Effects on Polystyrene Microplastic Settlement in Water: Implications for Environmental Behavior and Ecotoxicological Tests

Microplastic (MP) particle dispersions used in many recent publications covering adsorption or toxicological studies are not characterized very well. The size distribution of polydisperse dispersions is highly dependent on the agglomeration processes and influences experimental outcomes. Therefore, pre-treatment is a prerequisite for reproducibility. In this study, manual/automated shaking and ultrasonic treatment as different mechanical dispersion techniques were applied for the dispersion of cryomilled polystyrene (PS). Particle numbers and size distribution of dispersions were analyzed by a light extinction particle counter and the dispersion efficiency (ED) as the ratio between calculated volume and theoretical volume of suspended particles was used to compare techniques. PS dispersions (20 mg/L) treated for 90 min in an ultrasonic bath (120 W, 35 kHz) were evenly dispersed with a particle concentration of 140,000 particles/mL and a high reproducibility (rel. SD = 2.1%, n = 6). Automated horizontal shaking for 754 h (250 rpm) reached similar particle numbers (122,000/mL) but with a lower reproducibility (rel. SD = 9.1%, n = 6). Manual shaking by hand dispersed the lowest number of particles (55,000/mL) and was therefore found to be unsuitable to counteract homo-agglomeration. ED was calculated as 127%, 104% and 69% for ultrasonic treatment, horizontal shaking and manual shaking, respectively, showing an overestimation of volume assuming spherical shaped particles.

Evidence of Marine Microplastics in Commercially Harvested Seafood

Microplastic pollution is a global issue that has a detrimental impact on food safety. In marine environments, microplastics are a threat to marine organisms, as they are often the same size range as prey and are mistaken as food. Consumption of microplastics has led to the damage of digestive organs and a reduction in growth and reproductive output. In this study, microplastic pollution was assessed across three commercially available shrimp species that were obtained from the supermarkets of Singapore. A total of 93 individuals were studied from the Pacific white leg shrimp, Litopenaeus vannamei, the Argentine red shrimp Pleoticus muelleri and the Indian white shrimp Fenneropenaeus indicus. Microplastic fibers, fragments, film and spheres were identified from the digestive tract of these organisms. Microplastic abundance ranged from 13.4 to 7050 items. F. indicus exhibited the highest number of microplastics. Microplastic film was the most abundant in L. vannamei individuals (93–97%) and spheres were the most abundant in P. muelleri (70%) and F. indicus (61%) individuals. This study demonstrates that microplastic contamination is evident in commonly consumed shrimp and highlights the role of shrimp in the trophic transfer and accumulation of microplastics in seafood. The consumption of microplastic-containing seafood is a route of exposure to humans and has implications on human health and food security. Capsule: Microplastics were examined in three shrimp species from the supermarkets of Singapore. Microplastics ranged from 13.4 to 7050 items of shrimp.

Risks of floating microplastic in the global ocean

Despite the ubiquitous and persistent presence of microplastic (MP) in marine ecosystems, knowledge of its potential harmful ecological effects is low. In this work, we assessed the risk of floating MP (1 μm-5 mm) to marine ecosystems by comparing ambient concentrations in the global ocean with available ecotoxicity data. The integration of twenty-three species-specific effect threshold concentration data in a species sensitivity distribution yielded a median unacceptable level of 1.21 ∗ 10⁵ MP m^-³ (95% CI: 7.99 ∗ 10³-1.49 ∗ 10⁶ MP m^-³). We found that in 2010 for 0.17% of the surface layer (0-5 m) of the global ocean a threatening risk would occur. By 2050 and 2100, this fraction increases to 0.52% and 1.62%, respectively, according to the worst-case predicted future plastic discharge into the ocean. Our results reveal a spatial and multidecadal variability of MP-related risk at the global ocean surface. For example, we have identified the Mediterranean Sea and the Yellow Sea as hotspots of marine microplastic risks already now and even more pronounced in future decades.

The effect of long-term use on the catch efficiency of biodegradable gillnets

The effect of long-term use on the catch efficiency of biodegradable gillnets was investigated during commercial fishing trials and in controlled lab aging tests. The relative catch efficiency between biodegradable and nylon gillnets was evaluated over three consecutive fishing seasons for Atlantic cod (Gadus morhua) in Norway. The biodegradable gillnets progressively lost catch efficiency over time, as they caught 18.4%, 40.2%, and 47.4% fewer fish than the nylon gillnets during the first, second, and third season, respectively. A 1000-hour aging test revealed that both materials began to degrade after just 200 h and that biodegradable gillnets degraded faster than the nylon gillnets. Infrared spectroscopy revealed that the chemical structure of the biodegradable polymer changed more than the nylon. Although less catch efficient than nylon gillnets, biodegradable gillnets have great potential for reducing both capture in lost fishing gear and plastic pollution at sea, which are major problems in fisheries worldwide.

PET-microplastics as a vector for heavy metals in a simulated plant rhizosphere zone

Although microplastics (MPs) are ubiquitous contaminants in different ecosystems, their interactions with other pollutants including heavy metals remain relatively unknown. Wheat is an important grain that makes the basis of human food in many parts of the world. Thus, pollutants that affect its production are important subjects of study. This research focuses on the possible effects of the transport of the adsorbed heavy metals onto MPs to the roots of growing wheat. The adsorption of three heavy metals (Pb, Cd, and Zn) onto PET particles was examined. Pb and Cd were selected because they are known to be toxic, while Zn is an essential nutrient for plants. Adsorption experiments were performed using 1 g of PET-MP particles in 20 ml of five different concentrations of each individual element (Pb, Cd, and Zn) (denoted as S-elements). To investigate the antagonistic and synergistic effects of these elements on each other, they were studied collectively with all 3 elements present (denoted as C-elements). Desorption experiments were then performed for three scenarios in which the wheat rhizosphere zone was simulated. Generally, the concentration of the investigated heavy metals adsorption on polyethylene terephthalate (PET) decreased in the order: S-Cd > S-Zn > S-Pb and C-Zn > T-Cd > C-Pb. PET particles exposed to Zn, Cd, and Pb solution adsorbed from 7.2 to 8.5%, 5.3 to 9.8%, and 29.8 to 68.5% of the initial heavy metals concentration, respectively. 11.3 to 15.2%, 12.5 to 23.35%, and 5.5 to 33.6% of the initially adsorbed Zn, Cd, and Pb were desorbed in the wheat rhizosphere zone in the three defined scenarios, respectively. The results show that PET particles can act as a vector in transferring heavy metals to the rhizosphere zone.

Nanoplastics impact the zebrafish (Danio rerio) transcriptome: Associated developmental and neurobehavioral consequences

Microplastics (MPs) are a ubiquitous pollutant detected not only in marine and freshwater bodies, but also in tap and bottled water worldwide. While MPs have been extensively studied, the toxicity of their smaller counterpart, nanoplastics (NPs), is not well documented. Despite likely large-scale human and animal exposure to NPs, the associated health risks remain unclear, especially during early developmental stages. To address this, we investigated the health impacts of exposures to both 50 and 200 nm polystyrene NPs in larval zebrafish. From 6 to 120 h post-fertilization (hpf), developing zebrafish were exposed to a range of fluorescent NPs (10-10,000 parts per billion). Dose-dependent increases in accumulation were identified in exposed larval fish, potentially coinciding with an altered behavioral response as evidenced through swimming hyperactivity. Notably, exposures did not impact mortality, hatching rate, or deformities; however, transcriptomic analysis suggests neurodegeneration and motor dysfunction at both high and low concentrations. Furthermore, results of this study suggest that NPs can accumulate in the tissues of larval zebrafish, alter their transcriptome, and affect behavior and physiology, potentially decreasing organismal fitness in contaminated ecosystems. The uniquely broad scale of this study during a critical window of development provides crucial multidimensional characterization of NP impacts on human and animal health.

Impact of CeO2 nanoparticles on the aggregation kinetics and stability of polystyrene nanoplastics: Importance of surface functionalization and solution chemistry

The increasing application of plastics is accompanied by increasing concern over the stability and potential risk of nanoplastics. Heteroaggregation with metal-based nanoparticles (e.g., CeO₂-NPs) is critical to the environmental mobility of nanoplastics, as they are likely to be jointly emitted to the aquatic environment. Here, time-resolved dynamic light scattering was employed to evaluate the influence of CeO₂-NPs on the aggregation kinetics of differentially surface functionalized polystyrene nanoplastics (PS-NPs) in various water types. Natural organic matters and ionic strength were dominating factors influencing the heteroaggregation of PS-NPs and CeO₂-NPs in surface waters. The critical coagulation concentrations of PS-NPs were dependent on their surface coatings, which decreased in the presence of CeO₂-NPs due to electrostatic attraction and/or specific adsorption. Incubation of PS-NPs and CeO₂-NPs under different pH confirmed the importance of electrostatic force in the aggregation of PS NPs. A relatively low humic acid (HA) concentration promoted the heteroaggregation of NH₂-coated PS-NPs and CeO₂-NPs because the introduction of a HA surface coating decreased the electrostatic hindrance. At high HA concentrations, the aggregation was inhibited by steric repulsion. The combined effects of high efficiency of double layer compression, bridging and complexation contributed to the high capacity of Ca²⁺ in destabilizing the particles. These findings demonstrate that the environmental behavior of nanoplastics is influenced by the presence of other non-plastic particles and improve our understanding of the interactions between PS-NPs and CeO₂-NPs in complex and realistic aqueous environments.

Contamination of stream fish by plastic waste in the Brazilian Amazon

Pollution by plastics is a global problem, in particular through the contamination of aquatic environments and biodiversity. Although plastic contamination is well documented in the aquatic fauna of the oceans and large rivers of the world, there are few data on the organisms of headwater streams, especially in tropical regions. In the present study, we evaluated the contamination of small fish by plastics in Amazonian streams. For this, we evaluated the shape and size, and the abundance of plastics in the gastrointestinal tracts and gills of 14 fish species from 12 streams in eastern Brazilian Amazon. We used a Generalized Linear Mixed Model (GLMM) to compare the levels of contamination among species and between organs. Only one individual of the 68 evaluated (a small catfish Mastiglanis cf. asopos) contained no plastic particles, and no difference was found in the contamination of the gills and digestive tract. However, Hemigrammus unilineatus presented less contamination of both the gills and the digestive tract than the other species, while Polycentrus schomburgkii had less plastic in the gastrointestinal tract, whereas Crenicichla regani and Pimelodella gerii both had a larger quantity of plastic adhered to their gills in comparison with the other species. Nanoplastics and microplastics adhered most to the gills, while plastic fibers were the most common type of material overall. This is the first study to analyze plastic contamination in fish from Amazonian streams, and in addition to revealing high levels of contamination, some species were shown to possibly be more susceptible than others. This reinforces the need for further, more systematic research into the biological and behavioral factors that may contribute to the greater vulnerability of some fish species to contamination by plastics. Amazonian stream fish show contamination by plastics. The species respond differently. The smaller the particle, the easier it is to adhere to the gills.

Microplastics, microfibres and nanoplastics cause variable sub-lethal responses in mussels (Mytilus spp.)

We compare the toxicity of microplastics, microfibres and nanoplastics on mussels. Mussels (Mytilus spp.) were exposed to 500 ng mL-1 of 20 μm polystyrene microplastics, 10 × 30 μm polyamide microfibres or 50 nm polystyrene nanoplastics for 24 h or 7 days. Biomarkers of immune response, oxidative stress response, lysosomal destabilisation and genotoxic damage were measured in haemolymph, digestive gland and gills. Microplastics and microfibres were observed in the digestive glands, with significantly higher plastic concentrations after 7-days exposure (ANOVA, P < 0.05). Nanoplastics had a significant effect on hyalinocyte-granulocyte ratios (ANOVA, P < 0.05), indicative of a heightened immune response. SOD activity was significantly increased followed 24 h exposure to plastics (two-way ANOVA, P < 0.05), but returned to normal levels after 7-days exposure. No evidence of lysosomal destabilisation or genotoxic damage was observed from any form of plastic. The study highlights how particle size is a key factor in plastic particulate toxicity.

Evidence of small microplastics (<100 μm) ingestion by Pacific oysters (Crassostrea gigas): A novel method of extraction, purification, and analysis using Micro-FTIR

Microplastics (MPs) are present in fresh, brackish, or marine waters. Micro- and macroinvertebrates can mistake MPs or small microplastics (SMPs, <100 μm) to be food particles and easily ingest them according to the size of their mouthparts. SMPs may then block the passage of food through the intestinal tract (i.e. hepatopancreas), accumulate within the organism, and enter the food web. Pacific oysters (Crassostrea gigas) are allochthonous filter-feeding bivalve mollusks, which have been introduced in coastal seas around the world in both natural banks and farms. Considering their economic and ecological value, these bivalves have been chosen as a model to study the ingestion of SMPs. A novel method for the extraction and purification of SMPs in bivalves was developed. Quantification and simultaneous polymer identification of SMPs using Micro-FTIR (Fourier Transform Infrared Spectroscopy) were performed, with a limit of detection for the particle size of 5 μm.

Quality Criteria for Microplastic Effect Studies in the Context of Risk Assessment: A Critical Review

In the literature, there is widespread consensus that methods in plastic research need improvement. Current limitations in quality assurance and harmonization prevent progress in our understanding of the true effects of microplastic in the environment. Following the recent development of quality assessment methods for studies reporting concentrations in biota and water samples, we propose a method to assess the quality of microplastic effect studies. We reviewed 105 microplastic effect studies with aquatic biota, provided a systematic overview of their characteristics, developed 20 quality criteria in four main criteria categories (particle characterization, experimental design, applicability in risk assessment, and ecological relevance), propose a protocol for future effect studies with particles, and, finally, used all the information to define the weight of evidence with respect to demonstrated effect mechanisms. On average, studies scored 44.6% (range 20-77.5%) of the maximum score. No study scored positively on all criteria, reconfirming the urgent need for better quality assurance. Most urgent recommendations for improvement relate to avoiding and verifying background contamination, and to improving the environmental relevance of exposure conditions. The majority of the studies (86.7%) evaluated on particle characteristics properly, nonetheless it should be underlined that by failing to provide characteristics of the particles, an entire experiment can become irreproducible. Studies addressed environmentally realistic polymer types fairly well; however, there was a mismatch between sizes tested and those targeted when analyzing microplastic in environmental samples. In far too many instances, studies suggest and speculate mechanisms that are poorly supported by the design and reporting of data in the study. This represents a problem for decision-makers and needs to be minimized in future research. In their papers, authors frame 10 effects mechanisms as "suggested", whereas 7 of them are framed as "demonstrated". When accounting for the quality of the studies according to our assessment, three of these mechanisms remained. These are inhibition of food assimilation and/or decreased nutritional value of food, internal physical damage, and external physical damage. We recommend that risk assessment addresses these mechanisms with higher priority.

Bioavailability of Microplastics to Marine Zooplankton: Effect of Shape and Infochemicals

The underlying mechanisms that influence microplastic ingestion in marine zooplankton remain poorly understood. Here, we investigate how microplastics of a variety of shapes (bead, fiber, and fragment), in combination with the algal-derived infochemicals dimethyl sulfide (DMS) and dimethylsulfoniopropionate (DMSP), affect the ingestion rate of microplastics in three species of zooplankton, the copepods Calanus helgolandicus and Acartia tonsa and larvae of the European lobster Homarus gammarus. We show that shape affects microplastic bioavailability to different species of zooplankton, with each species ingesting significantly more of a certain shape: C. helgolandicus-fragments (P < 0.05); A. tonsa-fibers (P < 0.01); H. gammarus larvae-beads (P < 0.05). Thus, different feeding strategies between species may affect shape selectivity. Our results also showed significantly increased ingestion rates by C. helgolandicus on all microplastics that were infused with DMS (P < 0.01) and by H. gammarus larvae and A. tonsa on DMS-infused fibers and fragments (P < 0.05). By using a range of more environmentally relevant microplastics, our findings highlight how the feeding strategies of different zooplankton species may influence their susceptibility to microplastic ingestion. Furthermore, our novel study suggests that species reliant on chemosensory cues to locate their prey may be at an increased risk of ingesting aged microplastics in the marine environment.

Nanoplastics affect moulting and faecal pellet sinking in Antarctic krill (Euphausia superba) juveniles

Plastic debris has been identified as a potential threat to Antarctic marine ecosystems, however, the impact of nanoplastics (<1 μm) is currently unexplored. Antarctic krill (Euphausia superba) is a keystone species of Southern Ocean pelagic ecosystems, which plays a central role in the Antarctic food webs and carbon (C) cycle. Krill has been shown to rapidly fragment microplastic beads through the digestive system, releasing nanoplastics with unknown toxicological effects. Here we exposed krill juveniles to carboxylic (COOH, anionic) and amino- (NH₂, cationic) polystyrene nanoparticles (PS NPs) and we investigated lethal and sub-lethal endpoints after 48 h. The analysis of PS NP suspensions in Antarctic sea water (SW) media showed that PS-COOH formed large agglomerates (1043 ± 121 nm), while PS-NH₂ kept their nominal size (56.8 ± 3 nm) during the exposure time. After 48 h, no mortality was found but increase in exuviae production (12.6 ± 1.3%) and reduced swimming activity were observed in juveniles exposed to PS-NH₂. The microbial community composition in SW supports the release of krill moults upon PS NP exposure and stimulates further research on the pivotal role of krill in shaping Southern Ocean bacterial assemblages. The presence of fluorescent signal in krill faecal pellets (FPs) confirmed the waterborne ingestion and egestion of PS-COOH at 48 h of exposure. Changes in FP structure and properties were also associated to the incorporation of PS NPs regardless of their surface charge. The effects of PS NPs on krill FP properties were compared to Control 0 h as a reference for full FPs (plastic vs food) and Control 48 h as a reference for more empty-like FPs (plastic vs lack of food). Exposure to PS NPs led to a FP sinking rate comparable to Control 48 h, but significantly lower than Control 0 h (58.40 ± 23.60 m/d and 51.23 ± 28.60 m/d for PS-COOH and PS-NH₂; 168.80 ± 74.58 m/d for Control 0 h). Considering the important role played by krill in the food web and C export in the Southern Ocean, the present study provides cues about the potential impact of nanoplastics on Antarctic pelagic ecosystems and their biogeochemical cycles.

Micro- and nano-plastics activation of oxidative and inflammatory adverse outcome pathways

Microplastics (MPs) and nanoplastics (NPs) have attracted considerable attention in the recent years as potential threats to the ecosystem and public health. This review summarizes current knowledge of pathological events triggered by micro- and nano-plastics (MP/NPs) with focus on oxidative damages at different levels of biological complexity (molecular, cellular, tissue, organ, individual and population). Based on published information, we matched the apical toxicity endpoints induced by MP/NPs with key event (KE) or adverse outcomes (AO) and categorized them according to the Adverse Outcome Pathway (AOP) online knowledgebase. We used existing AOPs and applied them to highlight formal mechanistic links between identified KEs and AOs in two possible scenarios: first from ecological, and second from public health perspective. Ecological perspective AOP based literature analysis revealed that MP/NPs share formation of reactive oxygen species as their molecular initiating event, leading to adverse outcomes such as growth inhibition and behavior alteration through oxidative stress cascades and inflammatory responses. Application of AOP on literature data related to public health perspective of MP/NPs showed that oxidative stress and its responding pathways, including inflammatory responses, could play the role of key events. However insufficient information prevented precise definitions of AOPs at this level. To overcome this knowledge gap, further mammalian model and epidemiological studies are necessary to support development and construction of detailed AOPs with public health focus.

Microalgal ecotoxicity of nanoparticles: An updated review

Nowadays, nanotechnology and its related industries are becoming a rapidly explosive industry that offers many benefits to human life. However, along with the increased production and use of nanoparticles (NPs), their presence in the environment creates a high risk of increasing toxic effects on aquatic organisms. Therefore, a large number of studies focusing on the toxicity of these NPs to the aquatic organisms are carried out which used algal species as a common biological model. In this review, the influences of the physio-chemical properties of NPs and the response mechanisms of the algae on the toxicity of the NPs were discussed focusing on the "assay" studies. Besides, the specific algal toxicities of each type of NPs along with the NP-induced changes in algal cells of these NPs are also assessed. Almost all commonly-used NPs exhibit algal toxicity. Although the algae have similarities in the symptoms under NP exposure, the sensitivity and variability of each algae species to the inherent properties of each NPs are quite different. They depend strongly on the concentration, size, characteristics of NPs, and biochemical nature of algae. Through the assessment, the review identifies several gaps that need to be further studied to make an explicit understanding. The findings in the majority of studies are mostly in laboratory conditions and there are still uncertainties and contradictory/inconsistent results about the behavioral effects of NPs under field conditions. Besides, there remains unsureness about NP-uptake pathways of microalgae. Finally, the toxicity mechanisms of NPs need to be thoughtfully understood which is essential in risk assessment.

Microplastics and their affiliated PAHs in the sea surface connected to the southwest coast of Taiwan

Contamination by microplastics (MPs) and the associated organic pollutants has caused potential threats to the ecological environment of global waters. In this study, MPs were sampled by trawling from the surface waters of the estuary, fishing port entrance and harbor entrance areas connected to the southwestern coast of Taiwan. Moreover, the abundance, morphological characteristics, composition, and associated polycyclic aromatic hydrocarbons (PAHs) of MPs were analyzed. The abundance of MPs was 0.36 ± 0.21 items/m³, which was 6.4 ± 10.7% of the abundance of zooplanktons. The average abundance of MPs was the highest in the estuary area, indicating that river transport was the primary way for MPs to enter the ocean. The most dominant MPs were small (0.33-2 mm; 78.8 ± 8.1%), colored (60.0 ± 12.8%), fragments (66.1 ± 10.6%), comprising PE (52.6 ± 7.6%), and PP (38.7 ± 9.4%). The decomposition of various plastic products and disposable plastic packaging may be the most significant source. The total concentration of PAHs in MPs ranged from 104 to 3595 ng/g dw, with an average of 818 ± 874 ng/g dw. The diagnostic ratios and the results of principal component analysis (PCA) and multiple linear regression of the absolute principal component scores (MLR-APCS) indicated that the PAHs were mainly contributed from sources related to petrogenic (71.4%) and vehicles (28.6%). Most likely due to MPs on the sea surface coming into contact with floating oil spills from ships or floating tar particles.

Polystyrene nanoplastics reshape the anaerobic granular sludge for recovering methane from wastewater

Wastewater has been identified as an important carrier for nanoplastics, which could elicit unintended impacts on critical microbial processes. However, the long-term impacts of nanoplastics on anaerobic granular sludge (AGS) for methane recovery from wastewater and the mechanisms involved remains unclear. In this study, we investigated the long term exposure-response relationship between polystyrene nanoplastics (Nano-PS) and AGS. In continuous test over 120 days with 86 days' Nano-PS exposure, feeding wastewater with 10 μg/L of Nano-PS had no significant impacts on the AGS performance. In comparison, higher levels (i.e., 20 and 50 μg/L) of Nano-PS decreased methane production and chemical oxygen demand (COD) removal by 19.0-28.6% and 19.3-30.0%, respectively, along with volatile fatty acids (VFA) accumulation. More extracellular polymeric substance (EPS) was induced by 10 μg/L of Nano-PS as a response to protect microbes, but higher levels (i.e., 20 and 50 μg/L) of Nano-PS decreased EPS generation, causing a decline in granule size and cell viability. Fluorescence tagging found that a large number of Nano-PS agglomerated/accumulated on the outer layer of AGS and even transferred into deeper layers of AGS over exposure time, producing toxic effects to adherent microorganisms, e.g., Longilinea sp., Paludibacter sp. and Methanosaeta sp.. The oxidative stress induced by Nano-PS was revealed to be a key factor for reshaping the AGS, reflected by the increased reactive oxygen species (ROS) generation and lactate dehydrogenase (LDH) release. The sodium dodecyl sulfate (SDS) leached from Nano-PS was also demonstrated to restrain the activities of antioxidant enzymes, thereby further lessening resistance to oxidative stress induced by Nano-PS. This work improves our ability to predict the risks associated with this ubiquitous contaminant in the environment.

Polystyrene nanoplastics cause growth inhibition, morphological damage and physiological disturbance in the marine microalga Platymonas helgolandica

Effects of nanoplastics at low level on the marine primary producer are largely unclear. To assess the potential risk of nanoplastic pollution, this study exposed marine green microalgae Platymonas helgolandica to 20, 200, and 2000 μg/L 70-nm polystyrene nanoplastics for 6 days. Nanoplastics significantly inhibited the growth of P. helgolandica during the first 4 days of exposure, and elevated heterocyst frequency was observed in 200 and 2000 μg/L exposure groups in the early exposure stage. Exposure to 200 and 2000 μg/L nanoplastics for 4 days increased the membrane permeability and mitochondrial membrane potential, and decreased light energy used in photochemical processes of microalgae. Moreover, clear morphological changes, including surface folds, fragmentation, aggregation cluster, and rupture, in the microalgae exposed to nanoplastics were observed under scanning electron microscope and transmission electron microscope. These results demonstrate that nanoplastics could reduce the microalgal vitality by the damage on cell morphology and organelle function.

Critical Review of Processing and Classification Techniques for Images and Spectra in Microplastic Research

Microplastic research is a rapidly developing field, with urgent needs for high throughput and automated analysis techniques. We conducted a review covering image analysis from optical microscopy, scanning electron microscopy, fluorescence microscopy, and spectral analysis from Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy, pyrolysis gas-chromatography mass-spectrometry, and energy dispersive X-ray spectroscopy. These techniques were commonly used to collect, process, and interpret data from microplastic samples. This review outlined and critiques current approaches for analysis steps in image processing (color, thresholding, particle quantification), spectral processing (background and baseline subtraction, smoothing and noise reduction, data transformation), image classification (reference libraries, morphology, color, and fluorescence intensity), and spectral classification (reference libraries, matching procedures, and best practices for developing in-house reference tools). We highlighted opportunities to advance microplastic data analysis and interpretation by (i) quantifying colors, shapes, sizes, and surface topologies with image analysis software, (ii) identifying threshold values of particle characteristics in images that distinguish plastic particles from other particles, (iii) advancing spectral processing and classification routines, (iv) creating and sharing robust spectral libraries, (v) conducting double blind and negative controls, (vi) sharing raw data and analysis code, and (vii) leveraging readily available data to develop machine learning classification models. We identified analytical needs that we could fill and developed supplementary information for a reference library of plastic images and spectra, a tutorial for basic image analysis, and a code to download images from peer reviewed literature. Our major findings were that research on microplastics was progressing toward the use of multiple analytical methods and increasingly incorporating chemical classification. We suggest that new and repurposed methods need to be developed for high throughput screening using a diversity of approaches and highlight machine learning as one potential avenue toward this capability.

Recent developments in mass spectrometry for the characterization of micro- and nanoscale plastic debris in the environment

Development of analytical methods for the characterization (particle size determination, identification, and quantification) of the micro- and nanoscale plastic debris in the environment is a quickly emerging field and has gained considerable attention, not only within the scientific community, but also on the part of policy makers and the general public. In this Trends paper, the importance of developing and further improving analytical methodologies for the detection and characterization of sub-20-μm-range microplastics and especially nanoplastics is highlighted. A short overview of analytical methodologies showing considerable promise for the detection and characterization of such micro- and nanoscale plastic debris is provided, with emphasis on recent developments in mass spectrometry (MS)-based analytical methods. Novel hyphenated techniques combining the strengths of different analytical methods, such as field flow fractionation and MS-based detection, may be a way to adequately address the smallest fractions in plastic debris analysis, making such approaches worthwhile to be further explored.

Nano-plastics and their analytical characterisation and fate in the marine environment: From source to sea

Polymer contamination is a major pollutant in all waterways and a significant concern of the 21st Century, gaining extensive research, media, and public attention. The polymer pollution problem is so vast; plastics are now observed in some of the Earth's most remote regions such as the Mariana trench. These polymers enter the waterways, migrate, breakdown; albeit slowly, and then interact with the environment and the surrounding biodiversity. It is these biodiversity and ecosystem interactions that are causing the most nervousness, where health researchers have demonstrated that plastics have entered the human food chain, also showing that plastics are damaging organisms, animals, and plants. Many researchers have focused on reviewing the macro and micro-forms of these polymer contaminants, demonstrating a lack of scientific data and also a lack of investigation regarding nano-sized polymers. It is these nano-polymers that have the greatest potential to cause the most harm to our oceans, waterways, and wildlife. This review has been especially ruthless in discussing nano-sized polymers, their ability to interact with organisms, and the potential for these nano-polymers to cause environmental damage in the marine environment. This review details the breakdown of macro-, micro-, and nano-polymer contamination, examining the sources, the interactions, and the fates of all of these polymer sizes in the environment. The main focus of this review is to perform a comprehensive examination of the literature of the interaction of nanoplastics with organisms, soils, and waters; followed by the discussion of toxicological issues. A significant focus of the review is also on current analytical characterisation techniques for nanoplastics, which will enable researchers to develop protocols for nanopolymer analysis and enhance understanding of nanoplastics in the marine environment.

Behavior of tetracycline and polystyrene nanoparticles in estuaries and their joint toxicity on marine microalgae Skeletonema costatum

Polystyrene nanoplastics (PS NPs), which are newly emerging as particulate pollutants, are one of the most abundant plastic types in marine debris. Although there has been extensive research on microplastics, the sorption behavior of PS NPs in surface waters remains unknown. In addition, in the previous joint toxicity studies, the concentration of organic pollutant in the joint system was based on the EC₅₀ of this pollutant, rather than the actually amount of this pollutant adsorbed on nanoplastics (NPs). In this study, the sorption behavior of PS NPs with different surface charges in the surface water of estuaries and joint toxicity of that absorbed tetracycline antibiotic in equilibrium were investigated for the first time. Because of the electrostatic repulsion, salting-out effect, and partition function, the sorption capacity of tetracycline antibiotic by differently charged PS NPs was enhanced with increasing salinity. The biological effects of exposure to tetracycline-saturated PS NPs were complicated, which can be attributed to the surface characteristics of mixtures such as hydrophobicity and charges. Thus, the role of NPs in the natural environment as a carrier of antibiotics may provide an alternative for antibiotic inputs from inland water to coastal marine water, which would not only change the environmental fate and ecotoxicology of antibiotics and NPs, but also pose challenges to the safety of coastal aquaculture and marine ecosystem.

In situ surface-enhanced Raman spectroscopy for detecting microplastics and nanoplastics in aquatic environments

The detection of microplastics and nanoplastics in the environment, especially plastic particles in aquatic environments in situ, still faces challenges due to the limitations of current methods, instruments and size of plastic particles. This paper evaluates the potential of surface-enhanced Raman spectroscopy for the analysis of microplastics and nanoplastics. The condition of different tests including the volume ratio of sample to silver colloid, the concentrations of NaCl, and the concentrations of the samples, are assessed for the study of microplastics and nanoplastics (polystyrene (PS), polyethylene (PE) and polypropylene (PP)) in pure water and seawater. A method based on SERS, that uses silver colloid as the active substrate, is developed for the qualitative analysis of microplastics and nanoplastics in aquatic environments. The particle sizes of microplastics and nanoplastics include 100 nm, 500 nm and 10 μm. The Raman signals of microplastics and nanoplastics in pure water and seawater both show good enhancement efficiency. The optimal enhancement factor is 4 × 10⁴. The SERS-based detection method overcomes the limitations of microplastics and nanoplastics in liquids and can detect 100 nm plastics down to 40 μg/mL. It provides more possibility for the rapid detection of microplastics and nanoplastics in aquatic environments in the future.

Nanoplastics in the oceans: Theory, experimental evidence and real world

This review critically analyses >200 papers collected by searching on Pubmed the word "nanoplastics", a group of emerging contaminants which are receiving growing attention. The present review intends to provide an overview of current knowledge on nanoplastic pollution starting with the theory of polymer degradation, passing to laboratory confirmation of nanoplastic formation and ending with the possible occurrence in sea water samples. Most of the observations proposed focus the attention on polystyrene (PS) because the majority of research knowledge is based on this polymer. Moreover, we thoroughly describe what effects have been observed on different organisms tested in controlled conditions. Nanoplastics formation, fate and toxicity seem to be a very dynamic phenomenon. In light of this, we identify some aspects retained crucial when an ecotoxicological study with nanoplastics is performed and which elements of nanoplastics toxicity could be deeper covered.

Health impacts of environmental contamination of micro- and nanoplastics: a review

Plastics are extensively used in our daily life. However, a significant amount of plastic waste is discharged to the environment directly or via improper reuse or recycling. Degradation of plastic waste generates micro- or nano-sized plastic particles that are defined as micro- or nanoplastics (MNPs). Microplastics (MPs) are plastic particles with a diameter less than 5 mm, while nanoplastics (NPs) range in diameter from 1 to 100 or 1000 nm. In the current review, we first briefly summarized the environmental contamination of MNPs and then discussed their health impacts based on existing MNP research. Our review indicates that MNPs can be detected in both marine and terrestrial ecosystems worldwide and be ingested and accumulated by animals along the food chain. Evidence has suggested the harmful health impacts of MNPs on marine and freshwater animals. Recent studies found MPs in human stool samples, suggesting that humans are exposed to MPs through food and/or drinking water. However, the effect of MNPs on human health is scarcely researched. In addition to the MNPs themselves, these tiny plastic particles can release plastic additives and/or adsorb other environmental chemicals, many of which have been shown to exhibit endocrine disrupting and other toxic effects. In summary, we conclude that more studies are necessary to provide a comprehensive understanding of MNP pollution hazards and also provide a basis for the subsequent pollution management and control.

Microplastics and other anthropogenic particles in the surface waters of the Chesapeake Bay

Microplastics are a ubiquitous environmental contaminant whose distributions have been correlated with land-use and population density. Although there are numerous studies quantifying microplastics in the environment, local studies help inform sources, pathways, and policy. Here, we measure the concentration of microplastics in the surface waters across the Chesapeake Bay - the largest estuary in the USA. Thirty surface water samples from throughout the Chesapeake Bay were collected with a manta trawl. Samples were manually processed for microplastics and other anthropogenic particles. Fourier-transform infrared spectroscopy (FTIR) was used to determine the chemical composition of the particles. Higher concentrations were found near major cities and where larger rivers or tributaries met the Chesapeake Bay. Fragments, films, and fibres were the most common morphologies found, and polyethylene and polypropylene were the most common plastic types. These results can be used to inform mitigation strategies for microplastic pollution in the Chesapeake Bay region.