Phenylenediamine-Based FeNx/C Catalyst with High Activity for Oxygen Reduction in Acid Medium and Its Active-Site Probing

Hyperporous-Carbon-Supported Nonprecious Metal Electrocatalysts for the Oxygen Reduction Reaction

Highly porous carbonaceous nonprecious metal catalysts for the oxygen reduction reaction are prepared by carbonization of low-cost metalloporphyrin-based hyper-crosslinked polymers (MPH-X). With high surface area (2768 m²  g^-1 ), hierarchical porous structure, and high metal loading (9.97 wt %), the obtained hyperporous carbon MPH-Fe/C catalyst exhibits high oxygen reduction reaction (ORR) activity with a half-wave potential (0.816 V) that is comparable to the 0.819 V of commercial Pt/C. Stability tests reveal that MPH-Fe/C also exhibits outstanding long-term durability and methanol tolerance. Our findings may offer an alternative approach to produce nonprecious metal ORR catalysts on a large scale owing to the low-cost MPH-X precursors with diverse metal types.

In-Situ Formed Hydroxide Accelerating Water Dissociation Kinetics on Co3N for Hydrogen Production in Alkaline Solution

Sluggish water dissociation kinetics on nonprecious metal electrocatalysts limits the development of economical hydrogen production from water-alkali electrolyzers. Here, using Co₃N electrocatalyst as a prototype, we find that during water splitting in alkaline electrolyte a cobalt-containing hydroxide formed on the surface of Co₃N, which greatly decreased the activation energy of water dissociation (Volmer step, a main rate-determining step for water splitting in alkaline electrolytes). Combining the cobalt ion poisoning test and theoretical calculations, the efficient hydrogen production on Co₃N electrocatalysts would benefit from favorable water dissociation on in-situ formed cobalt-containing hydroxide and low hydrogen production barrier on the nitrogen sites of Co₃N. As a result, the Co₃N catalyst exhibits a low water-splitting activation energy (26.57 kJ mol^-1) that approaches the value of platinum electrodes (11.69 kJ mol^-1). Our findings offer new insight into understanding the catalytic mechanism of nitride electrocatalysts, thus contributing to the development of economical hydrogen production in alkaline electrolytes.

Transition metal-assisted carbonization of small organic molecules toward functional carbon materials

Nanostructured carbon materials with large surface area and desired chemical functionalities have been attracting considerable attention because of their extraordinary physicochemical properties and great application potentials in catalysis, environment, and energy storage. However, the traditional approaches to fabricating these materials rely greatly on complex procedures and specific precursors. We present a simple, effective, and scalable strategy for the synthesis of functional carbon materials by transition metal-assisted carbonization of conventional small organic molecules. We demonstrate that transition metals can promote the thermal stability of molecular precursors and assist the formation of thermally stable polymeric intermediates during the carbonization process, which guarantees the successful preparation of carbons with high yield. The versatility of this synthetic strategy allows easy control of the surface chemical functionality, porosity, and morphology of carbons at the molecular level. Furthermore, the prepared carbons exhibit promising performance in heterogeneous catalysis and electrocatalysis.

Doping-induced structural phase transition in cobalt diselenide enables enhanced hydrogen evolution catalysis

Transition metal dichalcogenide materials have been explored extensively as catalysts to negotiate the hydrogen evolution reaction, but they often run at a large excess thermodynamic cost. Although activating strategies, such as defects and composition engineering, have led to remarkable activity gains, there remains the requirement for better performance that aims for real device applications. We report here a phosphorus-doping-induced phase transition from cubic to orthorhombic phases in CoSe2. It has been found that the achieved orthorhombic CoSe2 with appropriate phosphorus dopant (8 wt%) needs the lowest overpotential of 104 mV at 10 mA cm-2 in 1 M KOH, with onset potential as small as -31 mV. This catalyst demonstrates negligible activity decay after 20 h of operation. The striking catalysis performance can be attributed to the favorable electronic structure and local coordination environment created by this doping-induced structural phase transition strategy.

Assembly of Hollow Carbon Nanospheres on Graphene Nanosheets and Creation of Iron-Nitrogen-Doped Porous Carbon for Oxygen Reduction

Triblock copolymer micelles coated with melamine-formaldehyde resin were self-assembled into closely packed two-dimensional (2D) arrangements on the surface of graphene oxide sheets. Carbonizing these structures created a 2D architecture composed of reduced graphene oxide (rGO) sandwiched between two monolayers of sub-40 nm diameter hollow nitrogen-doped carbon nanospheres (N-HCNS). Electrochemical tests showed that these hybrid structures had better performance for oxygen reduction compared to physically mixed rGO and N-HCNS that were not chemically bonded together. Further impregnation of the sandwich structures with iron (Fe) species followed by carbonization yielded Fe_1.6-N-HCNS/rGO-900 with a high specific surface area (968.3 m² g^-1), a high nitrogen doping (6.5 at%), and uniformly distributed Fe dopant (1.6 wt %). X-ray absorption fine structure analyses showed that most of the Fe in the nitrogen-doped carbon framework is composed of single Fe atoms each coordinated to four N atoms. The best Fe_1.6-N-HCNS/rGO-900 catalyst performed better in electrocatalytic oxygen reduction than 20 wt % Pt/C catalyst in alkaline medium, with a more positive half-wave potential of 0.872 V and the same limiting current density. Bottom-up soft-patterning of regular carbon arrays on free-standing 2D surfaces should enable conductive carbon supports that boost the performance of electrocatalytic active sites.

Mesoporous Hollow Nitrogen-Doped Carbon Nanospheres with Embedded MnFe2O4/Fe Hybrid Nanoparticles as Efficient Bifunctional Oxygen Electrocatalysts in Alkaline Media

Exploring sustainable and efficient electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is necessary for the development of fuel cells and metal-air batteries. Herein, we report a bimetal Fe/Mn-N-C material composed of spinel MnFe₂O₄/metallic Fe hybrid nanoparticles encapsulated in N-doped mesoporous hollow carbon nanospheres as an excellent bifunctional ORR/OER electrocatalyst in alkaline electrolyte. The Fe/Mn-N-C catalyst is synthesized via pyrolysis of bimetal ion-incorporated polydopamine nanospheres and shows impressive ORR electrocatalytic activity superior to Pt/C and good OER activity close to RuO₂ catalyst in alkaline environment. When tested in Zn-air battery, the Fe/Mn-N-C catalyst demonstrates excellent ultimate performance including power density, durability, and cycling. This work reports the bimetal Fe/Mn-N-C as a highly efficient bifunctional electrocatalyst and may afford useful insights into the design of sustainable transition-metal-based high-performance electrocatalysts.

Unveiling the high-activity origin of single-atom iron catalysts for oxygen reduction reaction

It is still a grand challenge to develop a highly efficient nonprecious-metal electrocatalyst to replace the Pt-based catalysts for oxygen reduction reaction (ORR). Here, we propose a surfactant-assisted method to synthesize single-atom iron catalysts (SA-Fe/NG). The half-wave potential of SA-Fe/NG is only 30 mV less than 20% Pt/C in acidic medium, while it is 30 mV superior to 20% Pt/C in alkaline medium. Moreover, SA-Fe/NG shows extremely high stability with only 12 mV and 15 mV negative shifts after 5,000 cycles in acidic and alkaline media, respectively. Impressively, the SA-Fe/NG-based acidic proton exchange membrane fuel cell (PEMFC) exhibits a high power density of 823 mW cm^-2 Combining experimental results and density-functional theory (DFT) calculations, we further reveal that the origin of high-ORR activity of SA-Fe/NG is from the Fe-pyrrolic-N species, because such molecular incorporation is the key, leading to the active site increase in an order of magnitude which successfully clarifies the bottleneck puzzle of why a small amount of iron in the SA-Fe catalysts can exhibit extremely superior ORR activity.

Oxygen Vacancy-Determined Highly Efficient Oxygen Reduction in NiCo2O4/Hollow Carbon Spheres

Rationally generating oxygen vacancies in electrocatalysts is an important approach to modulate the electrochemical activity of a catalyst. Herein, we report a remarkable enhancement in oxygen reduction reaction (ORR) activity of NiCo₂O₄ supported on hollow carbon spheres (HCS) achieved through generating abundant oxygen vacancies within the surface lattice. This catalyst exhibits enhanced ORR activity (larger limiting current density of ∼-5.8 mA cm^-2) and higher stability (∼90% retention after 40 000 s) compared with those of NiCo₂O₄/HCS and NiCo₂O₄. The results of X-ray photoelectron spectroscopy (XPS) characterizations suggest that the introduction of oxygen vacancies optimizes the valence state of active sites. Furthermore, we carried out density functional theory (DFT) calculations to further confirm the mechanism of oxygen vacancies, and results show that oxygen vacancies enhance the density of states (DOS) near the Fermi level, decrease work function, and lower the calculated overpotential of NiCo₂O₄.

Three-Dimensional Networks of S-Doped Fe/N/C with Hierarchical Porosity for Efficient Oxygen Reduction in Polymer Electrolyte Membrane Fuel Cells

Reasonable design and synthesis of Fe/N/C-based catalysts is one of the most promising way for developing precious metal-free oxygen reduction reaction (ORR) catalysts in acidic mediums. Herein, we developed a highly active metal-organic framework-derived S-doped Fe/N/C catalyst [S-Fe/Z8/2-aminothiazole (2-AT)] prepared by thermal treatment. The S-Fe/Z8/2-AT catalyst with uniform S-doping possesses a three-dimensional macro-meso-micro hierarchically porous structure. Moreover, the chemical composition and structural features have been well-optimized and characterized for such S-Fe/Z8/2-AT catalysts; and their formation mechanism was also revealed. Significantly, applying the optimal S-Fe/Z8/2-AT catalysts into electrocatalytic test exhibits remarkable ORR catalytic activity with a half-wave potential of 0.82 V (vs reversible hydrogen electrode) and a mass activity of 18.3 A g^-1 at 0.8 V in 0.1 M H₂SO₄ solution; the polymer electrolyte membrane fuel cell test also confirmed their excellent catalytic activity, which gives a maximal power density as high as 800 mW cm^-2 at 1 bar. A series of designed experiments disclosed that the favorable structural merits and desirable chemical compositions of S-Fe/Z8/2-AT catalysts are critical factors for efficient electrocatalytic performance. The work provides a new approach to open an avenue for accurately controlling the composition and structure of Fe/N/C catalysts with highly activity for ORR.

Templating Synthesis of Mesoporous Fe3C-Encapsulated Fe-N-Doped Carbon Hollow Nanospindles for Electrocatalysis

Developing cost-efficient alternatives to the noble metal catalysts toward oxygen reduction reaction (ORR) has attracted much attention. Herein, a kind of mesoporous hollow spindlelike Fe-N-C electrocatalysts with iron carbide nanoparticles encased in the N-doped graphitic layers has been synthesized by a novel "reactive hard template" strategy through the Fe³⁺-assisted polymerization of dopamine on the Fe₂O₃ cores and the following calcinations. The Fe₂O₃ nanospindles not only as the hard template guide the formation of well-defined shape and structure of the catalyst but also as the reactive template provide Fe reservoir to generate Fe₃C nanoparticles in the catalyst during the thermochemical process. The superiority in accessible active sites of Fe-N _x species, Fe₃C nanoparticles in graphenelike layers, and highly mesoporous hollow structure enables the catalysts to exhibit excellent ORR performances including high catalytic activity, outstanding long-term cycling stability, and good tolerance to methanol.

Rational Design and Synthesis of Low-Temperature Fuel Cell Electrocatalysts

Abstract

Recent progresses in proton exchange membrane fuel cell electrocatalysts are reviewed in this article in terms of cathodic and anodic reactions with a focus on rational design. These designs are based around gaining active sites using model surface studies and include high-index faceted Pt and Pt-alloy nanocrystals for anodic electrooxidation reactions as well as Pt-based alloy/core–shell structures and carbon-based non-precious metal catalysts for cathodic oxygen reduction reactions (ORR). High-index nanocrystals, alloy nanoparticles, and support effects are highlighted for anodic catalysts, and current developments in ORR electrocatalysts with novel structures and different compositions are emphasized for cathodic catalysts. Active site structures, catalytic performances, and stability in fuel cells are also reviewed for carbon-based non-precious metal catalysts. In addition, further developmental perspectives and the current status of advanced fuel cell electrocatalysts are provided.

Graphical Abstract

A Bifunctional Highly Efficient FeNx /C Electrocatalyst

Herein, a type of Fe, N-codoped carbon electrocatalyst (FeN_x /C, Fe-N-BCNT#BP) containing bamboo carbon nanotubes and displaying bifunctional high catalytic efficiency for both oxygen reduction reaction (ORR) and carbon dioxide reduction reaction (CO2RR) is reported. It shows high electrocatalytic activity and stability for both the ORR process with onset potential of 1.03 V_RHE in alkaline and the CO2RR to CO with high faradic efficiency up to 90% and selectivity of about 100% at low overpotential of 0.49 V. For CO2RR to CO, it is revealed that Fe₃ C is active but the activity of FeN_x centers is lower than that of C-N-based centers, contrary with that observed for ORR. Due to its low cost and high electrocatalytic performance for these two reduction reactions, the obtained catalyst is very promising for extensive application in future. The revealed huge activity difference of the same types of active sites for different reactions can efficiently guide the synthesis of advanced materials with multifunction.

Fe-N-Doped Mesoporous Carbon with Dual Active Sites Loaded on Reduced Graphene Oxides for Efficient Oxygen Reduction Catalysts

Transition metal/nitrogen/carbon (M-N/C) catalysts are considered as one of the most promising candidates to replace Pt/C catalysts for oxygen reduction reactions (ORRs). Here, we have designed novel reduced graphene oxide (rGO)-supported Fe-N-doped carbon (Fe-N-C/rGO) catalysts via simple pyrolysis of polypyrrole (Ppy)-FeO-GO composites. The as-prepared catalysts induced an onset potential of 0.94 V and a half-wave potential of 0.81 V in alkaline solutions, which is much better than those of the counterpart N-C and N-C/rGO catalysts and comparable to that of Pt/C catalysts. Moreover, the Fe-N-C/rGO catalysts showed improved durability and higher tolerance against methanol crossover than Pt/C in alkaline solutions. This superior ORR performance can be ascribed to the combined catalytic effect of both Fe-based nanoparticles (Fe₃O₄, Fe₄C) and Fe-N_x sites, as well as fast mass transfer and accessible active sites benefiting from the mesoporous structure and high specific surface area. This work provides new insight for synthesis of a more promising nonplatinum electrocatalyst for metal-air batteries and fuel-cell applications.

Electrochemical probing into the active sites of graphitic-layer encapsulated iron oxygen reduction reaction electrocatalysts

The graphitic-layer encapsulated iron-containing nanoparticles (G@Fe) have been proposed as a potential type of active and stable non-precious metal electrocatalysts (NPMCs) for the oxygen reduction reaction (ORR). However, the contribution of the encapsulated components to the ORR activity is still unclear compared with the well-recognized surface coordinated FeN_x/C structure. Using the strong complexing effect of the iron component with anions, cyanide (CN^-) in alkaline and thiocyanate (SCN^-) in acidic media, the metal containing active sites are electrochemically probed. Three representative catalysts are chosen for a comparison including the as-prepared encapsulated G@Fe, commercial Fe/N/C catalyst with iron-nitrogen coordinated surface functionalities and molecular iron phthalocyanine (FePc) containing well-defined structures and compositions. It was found that all samples showed significant shifts of half-wave potentials indicating that surface Fe coordinated sites in all cases. The G@Fe catalyst showed the weakest poisoning effect (the lowest shifts of half-wave potential) compared to the Fe/N/C and FePc catalysts in both electrolytes. These results could be explained that the encapsulated iron components influence the FeN_x/C and/or N_xC surface functionality.

Mesoporous S doped Fe–N–C materials as highly active oxygen reduction reaction catalyst

Highly active mesoporous S doped Fe–N–C ORR catalysts have been synthesized by pyrolysis of APS and FeCl₃ co-initiated poly(o-phenylenediamine).

Heteroatom-doped nanoporous carbon from recyclable Pueraria lobata and its dual activities for oxygen reduction and hydrogen evolution reactions

The bulk preparation of an N, P and Fe Tri-doped nano-porous carbon sample using recyclable Pueraria powder, which exhibits dual activities.

From biological enzyme to single atomic Fe–N–C electrocatalyst for efficient oxygen reduction

Inspired by metabolic processes in biological systems, animal blood as a biowaste rich in biological enzymes with molecular Fe–N centers was successfully explored to produce an efficient electrocatalyst with single atomic Fe–N–C active sites for oxygen reduction reaction.

The self-template synthesis of highly efficient hollow structure Fe/N/C electrocatalysts with Fe–N coordination for the oxygen reduction reaction

The exploration of highly efficient catalysts to replace noble metal platinum for the oxygen reduction reaction, on which M/N/C catalysts have shed brilliant light, is greatly significant but challenging. This paper presents a strategy for synthesizing highly efficient and stabilized hollow structure Fe/N/C catalysts with iron and nitrogen doped into the carbon layer by the self-template method. The prepared Fe/N/C catalysts with NaCl protection during pyrolysis are characterized by a unique hollow structure, porous morphology and Fe–N coordination as the active sites, all of which significantly endow the materials with excellent properties towards the ORR, including high electrical conductivity, long-term durability and outstanding capacity for methanol tolerance. We employed X-ray absorption fine structure spectrometry to investigate the chemical state and coordination environment of the central iron atoms of the Fe/N/C catalysts, which also clarified the promoting effect of the NaCl protection for Fe–N coordination during pyrolysis. In particular, the Fe/N/C catalysts exhibit positive half-wave potentials (0.84 V vs. RHE) and Tafel slope comparable to 20% commercial Pt/C, possessing four-electron transfer pathway as well as excellent long-term stability and methanol tolerance in alkaline medium.

The exploration of highly efficient catalysts to replace noble metal platinum for the oxygen reduction reaction, on which M/N/C catalysts have shed brilliant light, is greatly significant but challenging.

High-performance oxygen reduction catalysts in both alkaline and acidic fuel cells based on pre-treating carbon material and iron precursor

We demonstrate a new and simple method for pre-treating the carbon material and iron precursor to prepare oxygen reduction reaction (ORR) catalysts, which can produce super-high performance and stability in alkaline solution, with high performance in acid solution. This strategy using cheap materials is simply controllable. Moreover, it has achieved smaller uniform nanoparticles to exhibit high stability, and the synergetic effect of Fe and N offered much higher performance in ORR than commercial Pt/C, with high maximum power density in alkaline and acid fuel cell test. So it can make this kind of catalysts be the most promising alternatives of Pt-based catalysts with best performance/price.

Co Nanoparticles Encapsulated in N-Doped Carbon Nanosheets: Enhancing Oxygen Reduction Catalysis without Metal-Nitrogen Bonding

It is known that introducing metal nanoparticles (e.g., Fe and Co) into N-doped carbons can enhance the activity of N-doped carbons toward the oxygen reduction reaction (ORR). However, introducing metals into N-doped carbons inevitably causes the formation of multiple active sites. Thus, it is challenging to identify the active sites and unravel mechanisms responsible for enhanced ORR activity. Herein, by developing a new N-heterocyclic carbene (NHC)-Co complex as the nitrogen- and metal-containing precursor, we report the synthesis of N-doped carbon nanosheets embedded with Co nanoparticles as highly active ORR catalysts without direct metal-nitrogen bonding. Electrochemical measurements and X-ray absorption spectroscopy indicate that the carbon-nitrogen sites surrounding Co nanoparticles are responsible for the observed ORR activity and stability. Density functional theory calculations further reveal that Co nanoparticles could facilitate the protonation of O₂ and thus promote the ORR activity. These results provide new prospects in the rational design and synthesis of heteroatom-doped carbon materials as non-precious-metal catalysts for various electrochemical reactions.

Highly Active and Stable Fe-N-C Catalyst for Oxygen Depolarized Cathode Applications

Anion immunity toward the oxygen reduction reaction (ORR) has tremendous implications in electrocatalysis with applications for fuel cells, metal-air batteries, and oxygen depolarized cathodes (ODCs) in the anodic evolution of chlorine. The necessity of exploring ORR catalysts with immunity to anion adsorption is particularly significant considering that platinum group metal (PGM) catalysts are costly and highly vulnerable to impurities such as halides. Herein, we report a metal organic framework (MOF)-derived Fe-N-C catalyst that exhibits a dramatically improved half-wave potential of 240 mV compared to the state-of-the-art Rh_xS_y/C catalyst in a rotating disk electrode in the presence of Cl^-. The Fe-N₄ active sites in Fe-N-C are intrinsically immune to Cl^- poisoning, in contrast to Pt/C, which is severely susceptible to Cl^- poisoning. As a result, the activity of Fe-N-C decreases only marginally in the presence of Cl^-, far exceeding that of Pt/C. The viability of this catalyst as ODCs is further demonstrated in real-life hydrochloric acid electrolyzers using highly concentrated HCl solution saturated with Cl₂ gas as the electrolyte. The introduction of Fe-N-C materials as ODC catalysts here overcomes the limitations of (i) the low intrinsic ORR activity of Rh_xS_y/C as the state-of-the-art ODC catalyst; (ii) the vulnerability to Cl^- poisoning of Pt/C as the state-of-the-art ORR catalyst; and (iii) the high cost of precious metals in these two materials, resulting in a cost-effective ODC catalyst with the overall performance exceeding that of all previously reported materials.

Well-Defined Metal-O6 in Metal-Catecholates as a Novel Active Site for Oxygen Electroreduction

Metal-nitrogen coordination sites, M-N_x (M = Fe, Co, Ni, etc.), have shown great potential to replace platinum group materials as electrocatalysts for oxygen reduction reaction (ORR). However, the real active site in M-N_x is still vague to date due to their complicated structure and composition. It is therefore highly desirable but challenging to develop ORR catalysts with novel and clear active sites, which could meet the needs of comprehensive understanding of structure-function relationships and explore new cost-effective and efficient ORR electrocatalysts. Herein, well-defined M-O₆ coordination in metal-catecholates (M-CATs, M = Ni or Co) is discovered to be catalytically active for ORR via a four-electron-dominated pathway. In view of no pyrolysis involved and unambiguous crystalline structure of M-CATs, the M-O₆ octahedral coordination site with distinct structure is determined as a new type of active site for ORR. These findings extend the scope of metal-nonmetal coordination as an active site for ORR and pave a way for bottom-up design of novel electrocatalysts containing M-O₆ coordination.

Single-Atomic Ruthenium Catalytic Sites on Nitrogen-Doped Graphene for Oxygen Reduction Reaction in Acidic Medium

The cathodic oxygen reduction reaction (ORR) is essential in the electrochemical energy conversion of fuel cells. Here, through the NH₃ atmosphere annealing of a graphene oxide (GO) precursor containing trace amounts of Ru, we have synthesized atomically dispersed Ru on nitrogen-doped graphene that performs as an electrocatalyst for the ORR in acidic medium. The Ru/nitrogen-doped GO catalyst exhibits excellent four-electron ORR activity, offering onset and half-wave potentials of 0.89 and 0.75 V, respectively, vs a reversible hydrogen electrode (RHE) in 0.1 M HClO₄, together with better durability and tolerance toward methanol and carbon monoxide poisoning than seen in commercial Pt/C catalysts. X-ray adsorption fine structure analysis and aberration-corrected high-angle annular dark-field scanning transmission electron microscopy are performed and indicate that the chemical structure of Ru is predominantly composed of isolated Ru atoms coordinated with nitrogen atoms on the graphene substrate. Furthermore, a density function theory study of the ORR mechanism suggests that a Ru-oxo-N₄ structure appears to be responsible for the ORR catalytic activity in the acidic medium. These findings provide a route for the design of efficient ORR single-atom catalysts.

Fine Co Nanoparticles Encapsulated in a N-Doped Porous Carbon Matrix with Superficial N-Doped Porous Carbon Nanofibers for Efficient Oxygen Reduction

Herein, we develop a novel method to synthesize evenly dispersed fine Co nanoparticles (CoNPs) (particle size of ∼42 nm) encapsulated in a N-doped porous carbon matrix (NPCM) with superficial N-doped porous carbon nanofibers (NPCNF) (denoted as Co@NPCM/CNF-850) as an oxygen reduction reaction (ORR) electrocatalyst. Such an electrocatalyst is the direct pyrolysis product of the novel pine needle-like ZIF-67-based metal-organic framework nanowire array (MOFNWA) prepared using an inorganic cobalt carbonate hydroxide (Co(CO₃)_0.5(OH)·0.11H₂O) nanowire array as a linear sacrificial template, which is totally different from the traditional method, that is, using inorganic salts to synthesize MOF particles. Because of the high dispersibility of the effective fine N-doped carbon-wrapped CoNPs (rather than the overlarge CoNP aggregates); the unique linear MOF-derived assemblies, which are beneficial to electronic transmission; the high degree of graphitization, which is attributed to the superficial NPCNF and carbon layers wrapping the CoNPs; as well as the high porosity, our catalyst showed remarkable ORR activity (E_onset of 1.033 V vs the reversible hydrogen electrode) in alkaline solution. Besides, our catalyst revealed excellent stability and tolerance of methanol. Furthermore, on the basis of the X-ray absorption near-edge structure, extended X-ray absorption fine structure, and linear sweep voltammetry data, we first provided proof that a catalyst devoid of obvious Co-N_x can have superior ORR activity.