Visualization of ordered genomic RNA and localization of transcriptional complexes in rotavirus

Projection structure of VP6, the rotavirus inner capsid protein, and comparison with bluetongue VP7

The rotavirus nucleocapsid protein (VP6) is the major structural protein of inner capsid particles (ICP). VP6 is essential for RNA transcription and binds to a virally encoded glycoprotein receptor (NSP4) involved in the rotavirus assembly pathway. To explore the structure of VP6, two-dimensional (2D) crystals of VP6 were generated and examined by electron microscopy and image processing. Fourier transforms computed from low-dose images of negatively stained 2D VP6 crystals displayed complete data to 13 A resolution for p6 plane group symmetry. To correct for the resolution dependent fall-off of the amplitudes derived from electron microscopic images, the rotavirus VP6 amplitudes were scaled to the bluetongue VP7 amplitudes derived from the atomic model by applying a B factor of -360 A-2. The unit cell (a=b=101(+/-2)A, gamma=120(+/-1) degrees) contains two VP6 trimers, each composed of three roughly circular subunits approximately 30 A in diameter. The trimeric organization of VP6 is similar to the oligomeric structure of VP6 when assembled in T=13l icosahedral inner capsid particles at 25 to 40 A resolution. However, a channel at the center of the trimer is better resolved in our map at 15 A resolution. The projection structure of rotavirus VP6 was compared to the homologous protein (VP7) of bluetongue virus, which is also a member of the family of Reoviridae. Notably, both VP6 and bluetongue VP7 assemble as 260 capsomers on the surface of the inner capsid. To compare VP6 and VP7, a projection map of bluetongue VP7 at 15 A resolution was generated using the atomic model derived by X-ray crystallography. VP6 and VP7 both exhibit a trimeric organization with a central channel, even though the alignment identity between the 45 kDa VP6 and the 38 kDa VP7 primary sequences is only 12%. The ability of VP6 to form well-ordered 2D crystals should enable a higher resolution structure analysis by cryo-electron microscopy that will extend our understanding of the icosahedral ICP structure, clarify the mechanism by which VP6 interacts with the NSP4 receptor, and allow a more detailed comparison of VP6 and VP7.

Structure of L-A virus: a specialized compartment for the transcription and replication of double-stranded RNA

The genomes of double-stranded (ds)RNA viruses are never exposed to the cytoplasm but are confined to and replicated from a specialized protein-bound compartment-the viral capsid. We have used cryoelectron microscopy and three-dimensional image reconstruction to study this compartment in the case of L-A, a yeast virus whose capsid consists of 60 asymmetric dimers of Gag protein (76 kD). At 16-A resolution, we distinguish multiple domains in the elongated Gag subunits, whose nonequivalent packing is reflected in subtly different morphologies of the two protomers. Small holes, 10-15 A across, perforate the capsid wall, which functions as a molecular sieve, allowing the exit of transcripts and the influx of metabolites, while retaining dsRNA and excluding degradative enzymes. Scanning transmission electron microscope measurements of mass-per-unit length suggest that L-A RNA is an A-form duplex, and that RNA filaments emanating from disrupted virions often consist of two or more closely associated duplexes. Nuclease protection experiments confirm that the genome is entirely sequestered inside full capsids, but it is packed relatively loosely; in L-A, the center-to-center spacing between duplexes is 40-45 A, compared with 25-30 A in other double-stranded viruses. The looser packing of L-A RNA allows for maneuverability in the crowded capsid interior, in which the genome (in both replication and transcription) must be translocated sequentially past the polymerase immobilized on the inner capsid wall.

Structure of Broadhaven virus by cryoelectron microscopy: correlation of structural and antigenic properties of Broadhaven virus and bluetongue virus outer capsid proteins

The three-dimensional structure of Broadhaven virus (BRDV) has been determined to 23 A resolution by cryoelectron microscopy and image processing. As predicted from sequence homology, the BRDV structure resembles that of bluetongue virus (BTV) with the notable exception of one of the outer shell proteins. The cores of BRDV and BTV are identical at medium resolution; they have a diameter of 710 A and the VP7 trimers are arranged on a T = 13 icosahedral lattice. The outer shell proteins, VP5 of BRDV and BTV, have roughly the same molecular weight while VP4 of BRDV is only half the molecular weight of the corresponding VP2 of BTV. This size difference allows unambiguous determination of the identity of the triskelion shape as trimers of VP4 of BRDV (VP2 of BTV). The VP4 of BRDV sits on the VP7 trimers and projects outwards 40 A, giving the capsid an overall diameter of 790 A. This contrasts with VP2 of BTV, which projects outwards 95 A to give the capsid a diameter of 900 A. The difference in accessibility of the outer shell proteins of BRDV and BTV correlates with the difference in antigenic properties of these viral proteins. The shape of the BRDV VP5 indicates that it too is a trimer, thus implying that there are 360 copies of VP5 and 180 copies of VP4 per virion.

Chromatin domains and nuclear compartments: establishing sites of gene expression in eukaryotic nuclei

Establishing sites of transcription in the nuclei of higher eukaryotic cells is a very complex process. Before transcription can begin, a series of transcription factors must associate with their recognition motifs, within promoters and more remote activating sequences. Once bound, these factors and associated proteins are believed to form a complex that positions the RNA polymerase holoenzyme so that transcription can commence. As a consequence, active genes assume a specialized chromatin state across regions that define functional domains. Global nuclear architecture appears to stabilize these active domains by providing local environments dedicated to gene expression. As the spatial organization of these sites is unaffected by the removal of most chromatin they must be associated with a structural network. This nucleoskeleton, the associated transcription 'factories' and chromatin loops that arise as DNA binds proteins within factories now appear to be fundamental features of nuclear structure in higher eukaryotes. I argue that concentrating proteins needed to perform different steps of RNA synthesis within specialized nuclear compartments will be important in orchestrating events required for efficient gene expression.

Intermediates in the assembly pathway of the double-stranded RNA virus phi6

The double-stranded RNA bacteriophage phi6 contains a nucleocapsid enclosed by a lipid envelope. The nucleocapsid has an outer layer of protein P8 and a core consisting of the four proteins P1, P2, P4 and P7. These four proteins form the polyhedral structure which acts as the RNA packaging and polymerase complex. Simultaneous expression of these four proteins in Escherichia coli gives rise to procapsids that can carry out the entire RNA replication cycle. Icosahedral image reconstruction from cryo-electron micrographs was used to determine the three-dimensional structures of the virion-isolated nucleocapsid and core, and of several procapsid-related particles expressed and assembled in E. coli. The nucleocapsid has a T = 13 surface lattice, composed primarily of P8. The core is a rounded structure with turrets projecting from the 5-fold vertices, while the procapsid is smaller than the core and more dodecahedral. The differences between the core and the procapsid suggest that maturation involves extensive structural rearrangements producing expansion. These rearrangements are co-ordinated with the packaging and RNA polymerization reactions that result in virus assembly. This structural characterization of the phi6 assembly intermediates reveals the ordered progression of obligate stages leading to virion assembly along with striking similarities to the corresponding Reoviridae structures.

An atomic model of the outer layer of the bluetongue virus core derived from X-ray crystallography and electron cryomicroscopy

BACKGROUND

Bluetongue virus (BTV), which belongs to the Reoviridae family and orbivirus genus, is a non-enveloped, icosahedral, double-stranded RNA virus. Several protein layers enclose its genome; upon cell entry the outer layer is stripped away leaving a core, the surface of which is composed of VP7. The structure of the trimeric VP7 molecule has previously been determined using X-ray crystallography. The articulated VP7 subunit consists of two domains, one which is largely alpha-helical and the other, smaller domain, is a beta barrel with jelly-roll topology. The relative orientations of these two domains vary in different crystal forms. The structure of VP7 and the organizations of 780 subunits of this molecule in the core of virus is central to the assembly and function of BTV.

RESULTS

A 23 A resolution map of the core, determined using electron cryomicroscopy (cryoEM) data, reveals that the 260 trimers of VP7 are organized on a rather precise T = 13 laevo icosahedral lattice, in accordance with the theory of quasi-equivalence. The VP7 layer occupies a shell that is between 260 A and 345 A from the centre of the core. Below this radius (230-260 A) lies the T = 1 layer of 120 molecules of VP3. By fitting the X-ray structure of an individual VP7 trimer onto the cryoEM BTV core structure, we have generated an atomic model of the VP7 layer of BTV. This demonstrates that one of the molecular structures seen in crystals of the isolated VP7 corresponds to the in vivo conformation of the molecule in the core.

CONCLUSIONS

The beta-barrel domains of VP7 are external to the core and interact with protein in the outer layer of the mature virion. The lower, alpha-helical domains of VP7 interact with VP3 molecules which form the inner layer of the BTV core. Adjacent VP7 trimer-trimer interactions in the T = 13 layer are mediated principally through well-defined regions in the broader lower domains, to form a structure that conforms well with that expected from the theory of quasi-equivalence with no significant conformational changes within the individual trimers. The VP3 layer determines the particle size and forms a rather smooth surface upon which the two-dimensional lattice of VP7 trimers is laid down.

Rotavirus structure: interactions between the structural proteins

Structural studies on rotavirus using electron cryomicroscopy and computer image analysis have permitted visualization of each shell in the triple-layered rotavirus structure. Biochemical results have aided our interpretation of the structural organization of these layers and protein interactions seen in the three-dimensional structure, and have provided a better understanding of the structure-function relationships of the rotavirus structural proteins.