Extracellular-matrix tethering regulates stem-cell fate

Hydrogel Mechanics Influence the Growth and Development of Embedded Brain Organoids

Brain organoids are three-dimensional, tissue-engineered neural models derived from induced pluripotent stem cells that enable studies of neurodevelopmental and disease processes. Mechanical properties of the microenvironment are known to be critical parameters in tissue engineering, but the mechanical consequences of the encapsulating matrix on brain organoid growth and development remain undefined. Here, Matrigel was modified with an interpenetrating network (IPN) of alginate, to tune the mechanical properties of the encapsulating matrix. Brain organoids grown in IPNs were viable, with the characteristic formation of neuroepithelial buds. However, organoid growth was significantly restricted in the stiffest matrix tested. Moreover, stiffer matrixes skewed cell populations toward mature neuronal phenotypes, with fewer and smaller neural rosettes. These findings demonstrate that the mechanics of the culture environment are important parameters in brain organoid development and show that the self-organizing capacity and subsequent architecture of brain organoids can be modulated by forces arising from growth-induced compression of the surrounding matrix. This study therefore suggests that carefully designing the mechanical properties of organoid encapsulation materials is a potential strategy to direct organoid growth and maturation toward desired structures.

Replating Protocol for Human Induced Pluripotent Stem Cell-Derived Cardiomyocytes

Human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CM) create an unlimited cell source for basic and translational cardiac research. Obtaining hiPSC-CM culture as a single-cell, monolayer or three-dimensional clusters for downstream applications can be challenging. Thus, it is critical to develop replating strategies for hiPSC-CMs by evaluating different enzymatic or nonenzymatic reagents for dissociation and seeding on different coating materials. To reseed hiPSC-CMs with high viability and at structures desirable for the downstream applications, here we defined optimized protocols to dissociate hiPSC-CMs by using collagenase A&B, Collagenase II, TrypLE, and EDTA and reseeding on various matrix materials including fibronectin, laminin, imatrix, Matrigel, and Geltrex. By the replating methods described here, a single cell or cluster-containing hiPSC-CM cultures can be generated effectively.

In situ monitoring of functional activity of extracellular matrix stiffness-dependent multidrug resistance protein 1 using scanning electrochemical microscopy

Extracellular matrix (ECM) stiffness affects the drug resistance behavior of cancer cells, while multidrug resistance protein 1 (MRP1) on the cell membrane confers treatment resistance via actively transporting drugs out of cancer cells. However, the relationship between ECM stiffness and MRP1 functional activity in cancer cells remains elusive, mainly due to the technical challenge of in situ monitoring. Herein, we engineered in vitro cancer cell models using breast cancer cells (MCF-7 and MDA-MB-231 cells) as the reprehensive cells on polyacrylamide (PA) gels with three stiffness, mimicking different developmental stages of cancer. We in situ characterized the functional activity of MRP1 and investigated the effect of ECM stiffness on MRP1 of cancer cells before and after vincristine treatment using scanning electrochemical microscopy (SECM) with ferrocenecarboxylic acid (FcCOOH) as the redox mediator and endogenous glutathione (GSH) as the indicator. The SECM results show that the functional activity of MRP1 is enhanced with increasing ECM stiffness, and the MRP1-mediated vincristine efflux activity of MCF-7 cells is more affected by ECM stiffness than that of MDA-MB-231 cells. This work, for the first time, applied SECM to in situ and quantitatively monitor the functional activity of MRP1 in cancer cells in different tumor mechanical microenvironments, which could help to elucidate the mechanism of matrix stiffness-dependent drug resistance behavior in cancer cells.

SECM using FcCOOH as the redox mediator and endogenous GSH as the indicator was employed to investigate the effect of extracellular matrix stiffness on the functional activity of MRP1 in cancer cells in situ.

High-Throughput On-Chip Human Mesenchymal Stromal Cell Potency Prediction

Human mesenchymal stromal cells (hMSCs) are a promising source for regenerative cell therapy. However, hMSC clinical use has been stymied by product variability across hMSC donors and manufacturing practices resulting in inconsistent clinical outcomes. The inability to predict hMSC clinical efficacy, or potency, is a major limitation for market penetration. Standard metrics of hMSC potency employ hMSCs and third-party immune cell co-cultures, however, these assays face translational challenges due to third-party donor variability and lack of scalability. While surrogate markers of hMSC potency have been suggested, none have yet had translational success. To address this, a high-throughput, scalable, low-cost, on-chip microfluidic potency assay is presented with improved functional predictive power and recapitulation of in vivo secretory responses compared to traditional approaches. Comparison of hMSC secretory responses to functional hMSC-medicated immune cell suppression demonstrates shortcomings of current surrogate potency markers and identifies on-chip microfluidic potency markers with improved functional predictive power compared to traditional planar methods. Furthermore, hMSC secretory performance achieved in the on-chip microfluidic system has improved similarity compared to an in vivo model. The results underscore the shortcomings of current culture practices and present a novel system with improved functional predictive power and hMSC physiological responses.

Substratum stiffness regulates Erk signaling dynamics through receptor-level control

The EGFR/Erk pathway is triggered by extracellular ligand stimulation, leading to stimulus-dependent dynamics of pathway activity. Although mechanical properties of the microenvironment also affect Erk activity, their effects on Erk signaling dynamics are poorly understood. Here, we characterize how the stiffness of the underlying substratum affects Erk signaling dynamics in mammary epithelial cells. We find that soft microenvironments attenuate Erk signaling, both at steady state and in response to epidermal growth factor (EGF) stimulation. Optogenetic manipulation at multiple signaling nodes reveals that intracellular signal transmission is largely unaffected by substratum stiffness. Instead, we find that soft microenvironments decrease EGF receptor (EGFR) expression and alter the amount and spatial distribution of EGF binding at cell membranes. Our data demonstrate that the mechanical microenvironment tunes Erk signaling dynamics via receptor-ligand interactions, underscoring how multiple microenvironmental signals are jointly processed through a highly conserved pathway that regulates tissue development, homeostasis, and disease progression.

Cellular modulation by the mechanical cues from biomaterials for tissue engineering

Mechanical cues from the extracellular matrix (ECM) microenvironment are known to be significant in modulating the fate of stem cells to guide developmental processes and maintain bodily homeostasis. Tissue engineering has provided a promising approach to the repair or regeneration of damaged tissues. Scaffolds are fundamental in cell-based regenerative therapies. Developing artificial ECM that mimics the mechanical properties of native ECM would greatly help to guide cell functions and thus promote tissue regeneration. In this review, we introduce various mechanical cues provided by the ECM including elasticity, viscoelasticity, topography, and external stimuli, and their effects on cell behaviours. Meanwhile, we discuss the underlying principles and strategies to develop natural or synthetic biomaterials with different mechanical properties for cellular modulation, and explore the mechanism by which the mechanical cues from biomaterials regulate cell function toward tissue regeneration. We also discuss the challenges in multimodal mechanical modulation of cell behaviours and the interplay between mechanical cues and other microenvironmental factors.

TRPM7 Ion Channel: Oncogenic Roles and Therapeutic Potential in Breast Cancer

Simple Summary

Breast cancer is the most frequently diagnosed malignant tumor and the second leading cause of cancer death in women worldwide. The risk of developing breast cancer is 12.8%, i.e., 1 in 8 people, and a woman’s risk of dying is approximately 1 in 39. Calcium signals play an important role in various cancers and transport calcium ions may have altered expression in breast cancer, such as the TRPM7 calcium permeant ion channel, where overexpression may be associated with a poor prognosis. This review focuses on the TRPM7 channel, and the oncogenic roles studied so far in breast cancer. The TRPM7 ion channel is suggested as a potential and prospective target in the diagnosis and treatment of breast cancer.

Abstract

The transient receptor potential melastatin-subfamily member 7 (TRPM7) is a divalent cations permeant channel but also has intrinsic serine/threonine kinase activity. It is ubiquitously expressed in normal tissues and studies have indicated that it participates in important physiological and pharmacological processes through its channel-kinase activity, such as calcium/magnesium homeostasis, phosphorylation of proteins involved in embryogenesis or the cellular process. Accumulating evidence has shown that TRPM7 is overexpressed in human pathologies including breast cancer. Breast cancer is the second leading cause of cancer death in women with an incidence rate increase of around 0.5% per year since 2004. The overexpression of TRPM7 may be associated with a poor prognosis in breast cancer patients, so more efforts are needed to research a new therapeutic target. TRPM7 regulates the levels of Ca²⁺, which can alter the signaling pathways involved in survival, cell cycle progression, proliferation, growth, migration, invasion, epithelial-mesenchymal transition and thus determines cell behavior, promoting tumor development. This work provides a complete overview of the TRPM7 ion channel and its main involvements in breast cancer. Special consideration is given to the modulation of the channel as a potential target in breast cancer treatment by inhibition of proliferation, migration and invasion. Taken together, these data suggest the potential exploitation of TRPM7 channel-kinase as a therapeutic target and a diagnostic biomarker.

Current hydrogel advances in physicochemical and biological response-driven biomedical application diversity

Hydrogel is a type of versatile platform with various biomedical applications after rational structure and functional design that leverages on material engineering to modulate its physicochemical properties (e.g., stiffness, pore size, viscoelasticity, microarchitecture, degradability, ligand presentation, stimulus-responsive properties, etc.) and influence cell signaling cascades and fate. In the past few decades, a plethora of pioneering studies have been implemented to explore the cell-hydrogel matrix interactions and figure out the underlying mechanisms, paving the way to the lab-to-clinic translation of hydrogel-based therapies. In this review, we first introduced the physicochemical properties of hydrogels and their fabrication approaches concisely. Subsequently, the comprehensive description and deep discussion were elucidated, wherein the influences of different hydrogels properties on cell behaviors and cellular signaling events were highlighted. These behaviors or events included integrin clustering, focal adhesion (FA) complex accumulation and activation, cytoskeleton rearrangement, protein cyto-nuclei shuttling and activation (e.g., Yes-associated protein (YAP), catenin, etc.), cellular compartment reorganization, gene expression, and further cell biology modulation (e.g., spreading, migration, proliferation, lineage commitment, etc.). Based on them, current in vitro and in vivo hydrogel applications that mainly covered diseases models, various cell delivery protocols for tissue regeneration and disease therapy, smart drug carrier, bioimaging, biosensor, and conductive wearable/implantable biodevices, etc. were further summarized and discussed. More significantly, the clinical translation potential and trials of hydrogels were presented, accompanied with which the remaining challenges and future perspectives in this field were emphasized. Collectively, the comprehensive and deep insights in this review will shed light on the design principles of new biomedical hydrogels to understand and modulate cellular processes, which are available for providing significant indications for future hydrogel design and serving for a broad range of biomedical applications.

Viscoelasticity Acts as a Marker for Tumor Extracellular Matrix Characteristics

Biological materials such as extracellular matrix scaffolds, cancer cells, and tissues are often assumed to respond elastically for simplicity; the viscoelastic response is quite commonly ignored. Extracellular matrix mechanics including the viscoelasticity has turned out to be a key feature of cellular behavior and the entire shape and function of healthy and diseased tissues, such as cancer. The interference of cells with their local microenvironment and the interaction among different cell types relies both on the mechanical phenotype of each involved element. However, there is still not yet clearly understood how viscoelasticity alters the functional phenotype of the tumor extracellular matrix environment. Especially the biophysical technologies are still under ongoing improvement and further development. In addition, the effect of matrix mechanics in the progression of cancer is the subject of discussion. Hence, the topic of this review is especially attractive to collect the existing endeavors to characterize the viscoelastic features of tumor extracellular matrices and to briefly highlight the present frontiers in cancer progression and escape of cancers from therapy. Finally, this review article illustrates the importance of the tumor extracellular matrix mechano-phenotype, including the phenomenon viscoelasticity in identifying, characterizing, and treating specific cancer types.

Long term expansion profile of mesenchymal stromal cells at protein nanosheet-stabilised bioemulsions for next generation cell culture microcarriers

Tremendous progress in the identification, isolation and expansion of stem cells has allowed their application in regenerative medicine and tissue engineering, and their use as advanced in vitro models. As a result, stem cell manufacturing increasingly requires scale up, parallelisation and automation. However, solid substrates currently used for the culture of adherent cells are poorly adapted for such applications, owing to their difficult processing from cell products, relatively high costs and their typical reliance on difficult to recycle plastics and microplastics. In this work, we show that bioemulsions formed of microdroplets stabilised by protein nanosheets displaying strong interfacial mechanics are well-suited for the scale up of adherent stem cells such as mesenchymal stromal cells (MSCs). We demonstrate that, over multiple passages (up to passage 10), MSCs retain comparable phenotypes when cultured on such bioemulsions, solid microcarriers (Synthemax II) and classic 2D tissue culture polystyrene. Phenotyping (cell proliferation, morphometry, flow cytometry and differentiation assays) of MSCs cultured for multiple passages on these systems indicate that, although stemness is lost at late passages when cultured on these different substrates, stem cell phenotypes remained comparable between different culture conditions, at any given passage. Hence our study validates the use of bioemulsions for the long term expansion of adherent stem cells and paves the way to the design of novel 3D bioreactors based on microdroplet microcarriers.

Inhibition of matrix stiffness relating integrin β1 signaling pathway inhibits tumor growth in vitro and in hepatocellular cancer xenografts

Background

Cancer development is strictly correlated to composition and physical properties of the extracellular matrix. Particularly, a higher matrix stiffness has been demonstrated to promote tumor sustained growth. Our purpose was to explore the role of matrix stiffness in liver cancer development.

Methods

The matrix stiffness of tumor tissues was determined by atomic force microscopy (AFM) analysis. In vitro, we used a tunable Polyacrylamide (PA) hydrogels culture system for liver cancer cells culture. The expression level of integrin β1, phosphorylated FAK, ERK1/2, and NF-κB in SMMC-7721 cells was measured by western blotting analysis. We performed MTT, colony formation and transwell assay to examine the tumorigenic and metastatic potential of SMMC-7721 cells cultured on the tunable PA hydrogels. SMMC-7721 cancer xenografts were established to explore the anticancer effects of integrin inhibitors.

Results

Our study provided evidence that liver tumor tissues from metastatic patients possessed a higher matrix stiffness, when compared to the non-metastatic group. Liver cancer cells cultured on high stiffness PA hydrogels displayed enhanced tumorigenic potential and migrative properties. Mechanistically, activation of integrin β1/FAK/ ERK1/2/NF-κB signaling pathway was observed in SMMC-7721 cells cultured on high stiffness PA hydrogels. Inhibition of ERK1/2, FAK, and NF-κB signaling suppressed the pro-tumor effects induced by matrix stiffness. Combination of chemotherapy and integrin β1 inhibitor suppressed the tumor growth and prolonged survival time in hepatocellular cancer xenografts.

Conclusion

A higher matrix stiffness equipped tumor cells with enhanced stemness and proliferative characteristics, which was dependent on the activation of integrin β1/FAK/ERK1/2/NF-κB signaling pathway. Blockade of integrin signals efficiently improved the outcome of chemotherapy, which described an innovative approach for liver cancer treatment.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12885-021-08982-3.

Constructing a cell microenvironment with biomaterial scaffolds for stem cell therapy

Stem cell therapy is widely recognized as a promising strategy for exerting therapeutic effects after injury in degenerative diseases. However, limitations such as low cell retention and survival rates after transplantation exist in clinical applications. In recent years, emerging biomaterials that provide a supportable cellular microenvironment for transplanted cells have optimized the therapeutic efficacy of stem cells in injured tissues or organs. Advances in the engineered microenvironment are revolutionizing our understanding of stem cell-based therapies by co-transplanting with synthetic and tissue-derived biomaterials, which offer a scaffold for stem cells and propose an unprecedented opportunity to further employ significant influences in tissue repair and regeneration.

Mechanical Memory Impairs Adipose-Derived Stem Cell (ASC) Adipogenic Capacity After Long-Term In Vitro Expansion

Introduction

Adipose derived stem cells (ASCs) hold great promise for clinical applications such as soft tissue regeneration and for in vitro tissue models and are notably easy to derive in large numbers. Specifically, ASCs provide an advantage for in vitro models of adipose tissue, where they can be employed as tissue specific cells and for patient specific models. However, ASC in vitro expansion may unintentionally reduce adipogenic capacity due to the stiffness of tissue culture plastic (TCPS).

Methods

Here, we expanded freshly isolated ASCs on soft and stiff substrates for 4 passages before adipogenic differentiation. At the last passage we swapped the substrate from stiff to soft, or soft to stiff to determine if short term exposure to a different substrate altered adipogenic capacity.

Results

Expansion on stiff substrates reduced adipogenic capacity by 50% which was not rescued by swapping to a soft substrate for the last passage. Stiff substrates had greater nuclear area and gene expression of nesprin-2, a protein that mediates the tension of the nuclear envelope by tethering it to the actin cytoskeleton. Upon swapping to a soft substrate, the nuclear area was reduced but nesprin-2 levels did not fully recover, which differentially regulated cell commitment transcriptional factors.

Conclusion

Therefore, in vitro expansion on stiff substrates must be carefully considered when the end-goal of the expansion is for adipose tissue or soft tissue applications.

Microenvironment Stiffness Amplifies Post-ischemia Heart Regeneration in Response to Exogenous Extracellular Matrix Proteins in Neonatal Mice

The cardiogenesis of the fetal heart is absent in juveniles and adults. Cross-transplantation of decellularized extracellular matrix (dECM) can stimulate regeneration in myocardial infarct (MI) models. We have previously shown that dECM and tissue stiffness have cooperative regulation of heart regeneration in transiently regenerative day 1 neonatal mice. To investigate underlying mechanisms of mechano-signaling and dECM, we pharmacologically altered heart stiffness and administered dECM hydrogels in non-regenerative mice after MI. The dECM combined with softening exhibits preserved cardiac function, LV geometry, increased cardiomyocyte mitosis and lowered fibrosis while stiffening further aggravated ischemic damage. Transcriptome analysis identified a protein in cardiomyocytes, CLCA2, confirmed to be upregulated after MI and downregulated by dECM in a mechanosensitive manner. Synthetic knock-down of CLCA2 expression induced mitosis in primary rat cardiomyocytes in the dish. Together, our results indicate that therapeutic efficacy of extracellular molecules for heart regeneration can be modulated by heart microenvironment stiffness in vivo.

Physically-based structural modeling of a typical regenerative tissue analog bridges material macroscale continuum and cellular microscale discreteness and elucidates the hierarchical characteristics of cell-matrix interaction

This paper presents a comprehensive physically-based structural modelling for the passive and active biomechanical processes in a typical engineered tissue - namely, cell-compacted collagen gel. First, it introduces a sinusoidal curve analog for quantifying the mechanical response of the collagen fibrils and a probability distribution function of the characteristic crimp ratio for taking into account the fibrillar geometric entropic effect. The constitutive framework based on these structural characteristics precisely reproduces the nonlinearity, the viscoelasticity, and fairly captures the Poisson effect exhibiting in the macroscale tensile tests; which, therefore, substantially validates the structural modelling for the analysis of the cell-gel interaction during collagen gel compaction. Second, a deterministic molecular clutch model specific to the interaction between the cell pseudopodium and the collagen network is developed, which emphasizes the dependence of traction force on clutch number altering with the retrograde flow velocity, actin polymeric velocity, and the deformation of the stretched fibril. The modelling reveals the hierarchical features of cellular substrate sensing, i.e. a biphasic traction force response to substrate elasticity begins at the level of individual fibrils and develops into the second biphasic sensing by means of the fibrillar number integration at the whole-cell level. Singular in crossing the realms of continuum and discrete mechanics, the methodologies developed in this study for modelling the filamentous materials and cell-fibril interaction deliver deep insight into the temporospatially dynamic 3D cell-matrix interaction, and are able to bridge the cellular microscale and material macroscale in the exploration of related topics in mechanobiology.

StemBond hydrogels control the mechanical microenvironment for pluripotent stem cells

Studies of mechanical signalling are typically performed by comparing cells cultured on soft and stiff hydrogel-based substrates. However, it is challenging to independently and robustly control both substrate stiffness and extracellular matrix tethering to substrates, making matrix tethering a potentially confounding variable in mechanical signalling investigations. Moreover, unstable matrix tethering can lead to poor cell attachment and weak engagement of cell adhesions. To address this, we developed StemBond hydrogels, a hydrogel in which matrix tethering is robust and can be varied independently of stiffness. We validate StemBond hydrogels by showing that they provide an optimal system for culturing mouse and human pluripotent stem cells. We further show how soft StemBond hydrogels modulate stem cell function, partly through stiffness-sensitive ERK signalling. Our findings underline how substrate mechanics impact mechanosensitive signalling pathways regulating self-renewal and differentiation, indicating that optimising the complete mechanical microenvironment will offer greater control over stem cell fate specification.

The spatial form periosteal-bone complex promotes bone regeneration by coordinating macrophage polarization and osteogenic-angiogenic events

Bone defects associated with soft tissue injuries are an important cause of deformity that threatens people’s health and quality of life. Although bone substitutes have been extensively explored, effective biomaterials that can coordinate early inflammation regulation and subsequent repair events are still lacking. We prepared a spatial form periosteal bone extracellular matrix (ECM) scaffold, which has advantages in terms of low immunogenicity, good retention of bioactive ingredients, and a natural spatial structure. The periosteal bone ECM scaffold with the relatively low-stiffness periosteum (41.6 ± 3.7 kPa) could inhibit iNOS and IL-1β expression, which might be related to actin-mediated YAP translocation. It also helped to promote CD206 expression with the potential influence of proteins related to immune regulation. Moreover, the scaffold combined the excellent properties of decalcified bone and periosteum, promoted the formation of blood vessels, and good osteogenic differentiation (RUNX2, Col 1α1, ALP, OPN, and OCN), and achieved good repair of a cranial defect in rats. This scaffold, with its natural structural and biological advantages, provides a new idea for bone healing treatment that is aligned with bone physiology.

•

We provided a spatial form periosteal-bone complex.

•

The scaffold preserved major biological components and spatial structure.

•

The periosteum part of the scaffold acted as a physical barrier.

•

The scaffold participated in the transformation of the macrophage phenotype.

•

The scaffold promoted osteogenesis and angiogenesis.

Effect of bound water content on cell adhesion strength to water-insoluble polymers

Adhesion of cells on biomaterials plays an essential role in modulating cellular functions. Although hydration of biomaterials occurs under biological conditions, it is challenging to systematically evaluate the correlation of hydrated water content in biomaterials with the cell adhesion strength. In this report, we investigated the effect of bound water content on the adhesion strength of cells on poly(2-methoxyethyl acrylate) (PMEA) analogue substrates. Water-insoluble PMEA analogues were synthesized to fabricate substrates with a systemically controlled bound water content. To assess the surface properties of their substrates, contact angle measurement, atomic force microscopy (AFM), and fluorescence measurement were conducted. To reflect the effect of bound water of PMEA analogues, the relationship between the bound water content and cell adhesion behavior was evaluated under serum-free condition. From the single cell force spectrometry (SCFS) and microscopic analysis, it revealed that the increment of bound water content on the substrates decreased cell adhesion strength and cell spreading on the substrates. The bound water content exhibited a good correlation with adhesion strength, spreading area, circularity, and aspect ratio of cells. Our findings indicate that the bound water content could contribute to the development of a novel biomaterial and evaluation of cell behaviors on biomaterials. STATEMENT OF SIGNIFICANCE: For coordinating cell functions, such as growth, mobility, and differentiation, modulating the adhesion strength between cells and their environments is important. Although the hydration to biomaterials has been reported to be closely related to a antifouling property, the effect of hydration water on the cell adhesion behavior is not well understood. We present the first demonstration of essential relationship between cell adhesion strength and hydrated water on a biomaterials surface using the water-insoluble polymers with different hydrated water content. The results reveal that the hydrated water content of polymer substrates strong correlation with adhesion strength of cells. Collectively, the hydrated water content of the biomaterials will be a predominant factor affecting the cell adhesion strength and behavior.

Cell-derived extracellular matrix materials for tissue engineering

The involvement of cell-derived extracellular matrix (CDM) in assembling tissue engineering scaffolds has yielded significant results. CDM possesses excellent characteristics, such as ideal cellular microenvironment mimicry and good biocompatibility, which make it a popular research direction in the field of bionanomaterials. CDM has significant advantages as an expansion culture substrate for stem cells, including stabilization of phenotype, reversal of senescence, and guidance of specific differentiation. In addition, the applications of CDM-assembled tissue engineering scaffolds for disease simulation and tissue organ repair are comprehensively summarized; the focus is mainly on bone and cartilage repair, skin defect or wound healing, engineered blood vessels, peripheral nerves, and periodontal tissue repair. We consider CDM a highly promising bionic biomaterial for tissue engineering applications and propose a vision for its comprehensive development.

Magnetic Control and Real-Time Monitoring of Stem Cell Differentiation by the Ligand Nanoassembly

Native extracellular matrix (ECM) exhibits dynamic change in the ligand position. Herein, the ECM-emulating control and real-time monitoring of stem cell differentiation are demonstrated by ligand nanoassembly. The density of gold nanoassembly presenting cell-adhesive Arg-Gly-Asp (RGD) ligand on Fe₃ O₄ (magnetite) nanoparticle in nanostructures flexibly grafted to material is changed while keeping macroscale ligand density invariant. The ligand nanoassembly on the Fe₃ O₄ can be magnetically attracted to mediate rising and falling ligand movements via linker stretching and compression, respectively. High ligand nanoassembly density stimulates integrin ligation to activate the mechanosensing-assisted stem cell differentiation, which is monitored via in situ real-time electrochemical sensing. Magnetic control of rising and falling ligand movements hinders and promotes the adhesion-mediated mechanotransduction and differentiation of stem cells, respectively. These rising and falling ligand states yield the difference in the farthest distance (≈34.6 nm) of the RGD from material surface, thereby dynamically mimicking static long and short flexible linkers, which hinder and promote cell adhesion, respectively. Design of cytocompatible ligand nanoassemblies can be made with combinations of dimensions, shapes, and biomimetic ligands for remotely regulating stem cells for offering novel methodologies to advance regenerative therapies.

Regulation of Stem Cell Differentiation by Inorganic Nanomaterials: Recent Advances in Regenerative Medicine

Transplanting stem cells with the abilities of self-renewal and differentiation is one of the most effective ways to treat many diseases. In order to optimize the therapeutic effect of stem cell transplantation, it is necessary to intervene in stem cell differentiation. Inorganic nanomaterials (NMs), due to their unique physical and chemical properties, can affect the adhesion, migration, proliferation and differentiation of stem cells. In addition, inorganic NMs have huge specific surface area and modifiability that can be used as vectors to transport plasmids, proteins or small molecules to further interfere with the fate of stem cells. In this mini review, we summarized the recent advances of common inorganic NMs in regulating stem cells differentiation, and the effects of the stiffness, size and shape of inorganic NMs on stem cell behavior were discussed. In addition, we further analyzed the existing obstacles and corresponding perspectives of the application of inorganic NMs in the field of stem cells.

Modulation of hydrogel stiffness by external stimuli: soft materials for mechanotransduction studies

Mechanotransduction is an important process in determining cell survival, proliferation, migration and differentiation. The extracellular matrix (ECM) is the component of natural tissue that provides structural support and biochemical signals to adhering cells. The ECM is dynamic and undergoes physical and biochemical changes in response to various stimuli and there is an interest in understanding the effect of dynamic changes in stiffness on cell behaviour and fate. Therefore, stimuli-responsive hydrogels have been developed to mimic the cells' microenvironment in a controlled fashion. Herein, we review strategies for dynamic modulation of stiffness using various stimuli, such as light, temperature and pH. Special emphasis is placed on conducting polymer (CP) hydrogels and their fabrication procedures. We believe that the redox properties of CPs and hydrogels' biological properties make CPs hydrogels a promising substrate to investigate the effect of dynamic stiffness changes and mechanical actuation on cell fate in future studies.

Gellan gum-gelatin viscoelastic hydrogels as scaffolds to promote fibroblast differentiation

Fabricating hydrogel scaffolds that are both bioreactive toward fibroblasts while still mechanically compatible with surrounding tissue is a major challenge in tissue engineering. This is because the outcome of scaffold implantation is largely determined by fibroblasts differentiating toward myofibroblasts, which is characterized by the expression of α-smooth muscle actin (α-SMA). Previous studies promoted fibroblasts differentiation by increasing scaffold substrate stiffness. However, the stiffness of scaffold has to be compatible with surrounding tissue, as mismatched stiffness may cause initial hyperplasia and inappropriate endothelial layer development. Therefore, we adjusted the hydrogel chemical component, and thus viscoelasticity to affect the mechano-signaling of fibroblasts and promote fibroblasts differentiation. Elastic gellan gum and viscoelastic gelatin were hybridized at different ratios to fabricate hydrogel scaffold with varied stress-relaxation. Vitronectin (VN) was used to further regulate the interaction between fibroblasts and the substrate. Fibroblast differentiation, characterized by α-SMA area per cell, increased from~3000-4000 μm²/cell on less viscoelastic gels to ~5000 μm²/cell on the most viscoelastic gel. Fibroblasts seeded on hydrogels had a slower migration rate on more viscoelastic hydrogels (slowest at 38 ± 14 μm/h) compared to the migration speed on less viscoelastic hydrogels (74 ± 20 μm/h). VN slowed the migration speed on all hydrogels. The organization of collagen deposited by fibroblasts cultured on the hydrogels was characterized by second harmonic generation (SHG), which showed that collagen was more organized (parallel) on more viscoelastic hydrogels. In summary, we provided a novel strategy to fabricate hydrogel scaffolds that can promote fibroblasts differentiation while keeping the stiffness compatible with blood vessels. The most viscoelastic hydrogel studied here meets these requirements best.

Probing T Cell 3D Mechanosensing With Magnetically-Actuated Structures

The ability of cells to recognize and respond to the mechanical properties of their environment is of increasing importance in T cell physiology. However, initial studies in this direction focused on planar hydrogel and elastomer surfaces, presenting several challenges in interpretation including difficulties in separating mechanical stiffness from changes in chemistry needed to modulate this property. We introduce here the use of magnetic fields to change the structural rigidity of microscale elastomer pillars loaded with superparamagnetic nanoparticles, independent of substrate chemistry. This magnetic modulation of rigidity, embodied as the pillar spring constant, changed the interaction of mouse naïve CD4⁺ T cells from a contractile morphology to one involving deep embedding into the array. Furthermore, increasing spring constant was associated with higher IL-2 secretion, showing a functional impact on mechanosensing. The system introduced here thus separates local substrate stiffness and long-range structural rigidity, revealing new facets of T cell interaction with their environment.

Encapsulation and differentiation of adipose-derived mesenchymal stem cells in a biomimetic purine cross-linked chitosan sponge

Mesenchymal stem cells derived from adipose tissue have become a widely investigated cell source to use in tissue engineering applications. However, an optimal delivery scaffold for these cells is still needed. A rapidly gelling, injectable chitosan sponge was proposed in this study as a potential candidate for a suitable delivery scaffold. The results demonstrated the ability to encapsulate the stem cells at a 97.6% encapsulation efficiency and that the cells maintain their viability within the sponge. With the potential of using this scaffold for bone tissue engineering, ALP activity assay and fluorescent imaging for osteocalcin proved the ability to differentiate the encapsulated cells into the osteogenic lineage. Furthermore, co-encapsulation of pyrophosphatase within the sponge was investigated as a method to overcome the inhibitory effects that the sponge degradation by-products have on mineralization. Alizarin Red S staining demonstrated the beneficial effects of adding pyrophosphatase, where a significant increase in mineralization levels was achieved.

Anodic TiO2 Nanotubes: Tailoring Osteoinduction via Drug Delivery

TiO₂ nanostructures and more specifically nanotubes have gained significant attention in biomedical applications, due to their controlled nanoscale topography in the sub-100 nm range, high surface area, chemical resistance, and biocompatibility. Here we review the crucial aspects related to morphology and properties of TiO₂ nanotubes obtained by electrochemical anodization of titanium for the biomedical field. Following the discussion of TiO₂ nanotopographical characterization, the advantages of anodic TiO₂ nanotubes will be introduced, such as their high surface area controlled by the morphological parameters (diameter and length), which provides better adsorption/linkage of bioactive molecules. We further discuss the key interactions with bone-related cells including osteoblast and stem cells in in vitro cell culture conditions, thus evaluating the cell response on various nanotubular structures. In addition, the synergistic effects of electrical stimulation on cells for enhancing bone formation combining with the nanoscale environmental cues from nanotopography will be further discussed. The present review also overviews the current state of drug delivery applications using TiO₂ nanotubes for increased osseointegration and discusses the advantages, drawbacks, and prospects of drug delivery applications via these anodic TiO₂ nanotubes.

Surface activation with oxygen plasma promotes osteogenesis with enhanced extracellular matrix formation in three-dimensional microporous scaffolds

Various types of synthetic polyesters have been developed as biomaterials for tissue engineering. These materials commonly possess biodegradability, biocompatibility, and formability, which are preferable properties for bone regeneration. The major challenge of using synthetic polyesters is the result of low cell affinity due to their hydrophobic nature, which hinders efficient cell seeding and active cell dynamics. To improve wettability, plasma treatment is widely used in industry. Here, we performed surface activation with oxygen plasma to hydrophobic copolymers, poly(l-lactide-co-trimethylene carbonate), which were shaped in 2D films and 3D microporous scaffolds, and then we evaluated the resulting surface properties and the cellular responses of rat bone marrow stem cells (rBMSC) to the material. Using scanning electron microscopy and Fourier-transform infrared spectroscopy, we demonstrated that short-term plasma treatment increased nanotopographical surface roughness and wettability with minimal change in surface chemistry. On treated surfaces, initial cell adhesion and elongation were significantly promoted, and seeding efficiency was improved. In an osteoinductive environment, rBMSC on plasma-treated scaffolds exhibited accelerated osteogenic differentiation with osteogenic markers including RUNX2, osterix, bone sialoprotein, and osteocalcin upregulated, and a greater amount of collagen matrix and mineral deposition were found. This study shows the utility of plasma surface activation for polymeric scaffolds in bone tissue engineering.

Embracing Mechanobiology in Next Generation Organ-On-A-Chip Models of Bone Metastasis

Bone metastasis in breast cancer is associated with high mortality. Biomechanical cues presented by the extracellular matrix play a vital role in driving cancer metastasis. The lack of in vitro models that recapitulate the mechanical aspects of the in vivo microenvironment hinders the development of novel targeted therapies. Organ-on-a-chip (OOAC) platforms have recently emerged as a new generation of in vitro models that can mimic cell-cell interactions, enable control over fluid flow and allow the introduction of mechanical cues. Biomaterials used within OOAC platforms can determine the physical microenvironment that cells reside in and affect their behavior, adhesion, and localization. Refining the design of OOAC platforms to recreate microenvironmental regulation of metastasis and probe cell-matrix interactions will advance our understanding of breast cancer metastasis and support the development of next-generation metastasis-on-a-chip platforms. In this mini-review, we discuss the role of mechanobiology on the behavior of breast cancer and bone-residing cells, summarize the current capabilities of OOAC platforms for modeling breast cancer metastasis to bone, and highlight design opportunities offered by the incorporation of mechanobiological cues in these platforms.

2D biointerfaces to study stem cell-ligand interactions

Stem cells have great potential in the field of tissue engineering and regenerative medicine due to their inherent regenerative capabilities. However, an ongoing challenge within their clinical translation is to elicit or predict the desired stem cell behavior once transplanted. Stem cell behavior and function are regulated by their interaction with biophysical and biochemical signals present in their natural environment (i.e., stem cell niches). To increase our understanding about the interplay between stem cells and their resident microenvironments, biointerfaces have been developed as tools to study how these substrates can affect stem cell behaviors. This article aims to review recent developments on fabricating cell-instructive interfaces to control cell adhesion processes towards directing stem cell behavior. After an introduction on stem cells and their natural environment, static surfaces exhibiting predefined biochemical signals to probe the effect of chemical features on stem cell behaviors are discussed. In the third section, we discuss more complex dynamic platforms able to display biochemical cues with spatiotemporal control using on-off ligand display, reversible ligand display, and ligand mobility. In the last part of the review, we provide the reader with an outlook on future designs of biointerfaces. STATEMENT OF SIGNIFICANCE: Stem cells have great potential as treatments for many degenerative disorders prevalent in our aging societies. However, an ongoing challenge within their clinical translation is to promote stem cell mediated regeneration once they are transplanted in the body. Stem cells reside within our bodies where their behavior and function are regulated by interactions with their natural environment called the stem cell niche. To increase our understanding about the interplay between stem cells and their niche, 2D materials have been developed as tools to study how specific signals can affect stem cell behaviors. This article aims to review recent developments on fabricating cell-instructive interfaces to control cell adhesion processes towards directing stem cell behavior.

Three-dimensional bioprinting of a full-thickness functional skin model using acellular dermal matrix and gelatin methacrylamide bioink

Treatment of full-thickness skin defects still presents a significant challenge in clinical practice. Three-dimensional (3D) bioprinting technique offers a promising approach for fabricating skin substitutes. However, it is necessary to identify bioinks that have both sufficient mechanical properties and desirable biocompatibilities. In this study, we successfully fabricated acellular dermal matrix (ADM) and gelatin methacrylamide (GelMA) bioinks. The results demonstrated that ADM preserved the main extracellular matrix (ECM) components of the skin and GelMA had tunable mechanical properties. Both bioinks with shear-thinning properties were suitable for 3D bioprinting and GelMA bioink exhibited high printability. Additionally, the results revealed that 20% GelMA with sufficient mechanical properties was suitable to engineer epidermis, 1.5% ADM and 10% GelMA displayed relatively good cytocompatibilities. Here, we proposed a new 3D structure to simulate natural full-thickness skin, which included 20% GelMA with HaCaTs as an epidermal layer, 1.5% ADM with fibroblasts as the dermis, and 10% GelMA mesh with human umbilical vein endothelial cells (HUVECs) as the vascular network and framework. We demonstrated that this 3D bioprinting functional skin model (FSM) could not only promote cell viability and proliferation, but also support epidermis reconstruction in vitro. When transplanted in vivo, the FSM could maintain cell viability for at least 1 week. Furthermore, the FSM promoted wound healing and re-epithelization, stimulated dermal ECM secretion and angiogenesis, and improved wound healing quality. The FSM may provide viable functional skin substitutes for future clinical applications. STATEMENT OF SIGNIFICANCE: We propose a new 3D structure to simulate natural full-thickness skin, which included 20% GelMA with HaCaTs as an epidermal layer, 1.5% ADM with fibroblasts as the dermis, and 10% GelMA mesh with HUVECs as the vascular network. It could not only maintain a moist microenvironment and barrier function, but also recreate the natural skin microenvironment to promote cell viability and proliferation. This may provide viable functional skin substitutes for future clinical applications.

Effect of Polymeric Matrix Stiffness on Osteogenic Differentiation of Mesenchymal Stem/Progenitor Cells: Concise Review

Mesenchymal stem/progenitor cells (MSCs) have a multi-differentiation potential into specialized cell types, with remarkable regenerative and therapeutic results. Several factors could trigger the differentiation of MSCs into specific lineages, among them the biophysical and chemical characteristics of the extracellular matrix (ECM), including its stiffness, composition, topography, and mechanical properties. MSCs can sense and assess the stiffness of extracellular substrates through the process of mechanotransduction. Through this process, the extracellular matrix can govern and direct MSCs' lineage commitment through complex intracellular pathways. Hence, various biomimetic natural and synthetic polymeric matrices of tunable stiffness were developed and further investigated to mimic the MSCs' native tissues. Customizing scaffold materials to mimic cells' natural environment is of utmost importance during the process of tissue engineering. This review aims to highlight the regulatory role of matrix stiffness in directing the osteogenic differentiation of MSCs, addressing how MSCs sense and respond to their ECM, in addition to listing different polymeric biomaterials and methods used to alter their stiffness to dictate MSCs' differentiation towards the osteogenic lineage.

An Integrated Smart Sensor Dressing for Real-Time Wound Microenvironment Monitoring and Promoting Angiogenesis and Wound Healing

Prolonged chronic wound healing not only places great stress on patients but also increase the health care burden. Fortunately, the emergence of tissue-engineered dressings has provided a potential solution for these patients. Recently, the relationship between the wound microenvironment and wound healing has been gradually clarified. Therefore, the state of wounds can be roughly ascertained by monitoring the microenvironment in real time. Here, we designed a three-layer integrated smart dressing, including a biomimetic nanofibre membrane, microenvironment sensor and β-cyclodextrin-containing gelatine methacryloyl (GelMA + β-cd) UV-crosslinked hydrogel. The hydrogel helped increase the expression of vascular endothelial growth factor (VEGF) through hypoxia-inducible factor-1α (HIF-1α) to promote neovascularization and wound healing. The microenvironment sensor, combined with the biological dressings, exhibited satisfactory measurement accuracy, stability, durability and biocompatibility. A BLE4.0 antenna was used to receive, display and upload wound microenvironment data in real time. Such integrated smart dressings can not only achieve biological functions but also monitor changes in the wound microenvironment in real time. These dressings can overcome the challenge of not knowing the state of the wound during the healing process and provide support for clinical work.

ILK regulates osteogenic differentiation of Human Periodontal Ligament Stem Cells through YAP-mediated Mechanical Memory

Mechanical memory meant the mechanical properties of the matrix could influence the cell fate even after the matrix was changed and has been justified in many kinds of cells. To utilize the phenomenon to improve periodontal tissue engineering, we studied whether mechanical memory existed in human periodontal ligament stem cells and testified if ILK plays a role in this process. The substrate of different stiffness was fabricated by gelatin methacrylate hydrogel. Two groups of hPDLSCs with stiff (St) and soft (So) matrix respectively were cultivated. Then half of the cells exchanged their matrix stiffness in the fourth passage and therefore So, St, So-St and St-So were formed. Morphology of hPDLSCs and intracellular location of YAP was observed via fluorescence staining, osteogenic differentiation of hPDLSCs was assessed by Real-Time PCR, ALP staining and western blot. Then all these were reassessed after the ILK gene had been knocked down. The results showed that morphology and YAP location of hPDLSCs were different between matrix changed and unchanged groups; osteogenic genes expression, ALP staining and western blot also varied. After the ILK gene had been knocked down, the YAP location and osteogenic activity of hPDLSCs were significantly influenced. Thus, it could be concluded that mechanical memory exists in hPDLSCs; ILK is involved in this process.

CCL2: An Important Mediator Between Tumor Cells and Host Cells in Tumor Microenvironment

Tumor microenvironment (TME) formation is a major cause of immunosuppression. The TME consists of a considerable number of macrophages and stromal cells that have been identified in multiple tumor types. CCL2 is the strongest chemoattractant involved in macrophage recruitment and a powerful initiator of inflammation. Evidence indicates that CCL2 can attract other host cells in the TME and direct their differentiation in cooperation with other cytokines. Overall, CCL2 has an unfavorable effect on prognosis in tumor patients because of the accumulation of immunosuppressive cell subtypes. However, there is also evidence demonstrating that CCL2 enhances the anti-tumor capability of specific cell types such as inflammatory monocytes and neutrophils. The inflammation state of the tumor seems to have a bi-lateral role in tumor progression. Here, we review works focusing on the interactions between cancer cells and host cells, and on the biological role of CCL2 in these processes.

Tracking cell migration by cellular force footprint recorded with a mechano-optical biosensor

Conventional cell migration assays require time-lapse imaging of live cells to trace cell migration paths, consequently demanding cumbersome hardware setup and suffering from low data throughput. In this work, we developed an assay named Tracking Cells by Footprint (TCF) based on a mechano-optical biosensor that irreversibly becomes fluorescent when sensing local cell adhesive force. Cell migration paths are visualized and recorded as fluorescent footprints on glass or elastic substrates coated with such biosensor. From the footprints, cell migration ranges, speeds and persistence are analyzed and quantified without the need of time-lapse imaging. The feasibility of TCF assays was demonstrated with three types of cells with different migratory capabilities. TCF was then applied to evaluating cell motility affected by biochemical or biomechanical cues. The results show that fibroblast motility is reduced by blebbistatin and vinblastine but promoted by bFGF (basic fibroblast growth factor), and the motility correlates with the substrate rigidity. TCF is also compatible with 96-well plates which, combined with static imaging and large-area scanning, provides high data throughput with minimal additional effort.

Stiffness Regulates the Morphology, Adhesion, Proliferation, and Osteogenic Differentiation of Maxillary Schneiderian Sinus Membrane-Derived Stem Cells

Recent studies, which aim to optimize maxillary sinus augmentation, have paid significant attention exploring osteogenic potential of maxillary Schneiderian sinus membrane-derived cells (MSSM-derived cells). However, it remains unclear that how MSSM-derived cells could respond to niche's biomechanical properties. Herein, this study investigated the possible effects of substrate stiffness on rMSSM-derived stem cell fate. Initially, rMSSM-derived stem cells with multiple differentiation potential were successfully obtained. We then fabricated polyacrylamide substrates with varied stiffness ranging from 13 to 68 kPa to modulate the mechanical environment of rMSSM-derived stem cells. A larger cell spreading area and increased proliferation of rMSSM-derived stem cells were found on the stiffer substrates. Similarly, cells became more adhesive as their stiffness increased. Furthermore, the higher stiffness facilitated osteogenic differentiation of rMSSM-derived stem cells. Overall, our results indicated that increase in stiffness could mediate behaviors of rMSSM-derived stem cells, which may serve as a guide in future research to design novel biomaterials for maxillary sinus augmentation.

Uniaxial Cyclic Stretching Promotes Chromatin Accessibility of Gene Loci Associated With Mesenchymal Stem Cells Morphogenesis and Osteogenesis

It has been previously demonstrated that uniaxial cyclic stretching (UCS) induces differentiation of mesenchymal stem cells (MSCs) into osteoblasts in vitro. It is also known that interactions between cells and external forces occur at various aspects including cell–matrix, cytoskeleton, nucleus membrane, and chromatin. However, changes in chromatin landscape during this process are still not clear. The present study was aimed to determine changes of chromatin accessibility under cyclic stretch. The influence of cyclic stretching on the morphology, proliferation, and differentiation of hMSCs was characterized. Changes of open chromatin sites were determined by assay for transposase accessible chromatin with high-throughput sequencing (ATAC-seq). Our results showed that UCS induced cell reorientation and actin stress fibers realignment, and in turn caused nuclear reorientation and deformation. Compared with unstrained group, the expression of osteogenic and chondrogenic marker genes were the highest in group of 1 Hz + 8% strain; this condition also led to lower cell proliferation rate. Furthermore, there were 2022 gene loci with upregulated chromatin accessibility in 1 Hz + 8% groups based on the analysis of chromatin accessibility. These genes are associated with regulation of cell morphogenesis, cell–substrate adhesion, and ossification. Signaling pathways involved in osteogenic differentiation were found in up-regulated GO biological processes. These findings demonstrated that UCS increased the openness of gene loci associated with regulation of cell morphogenesis and osteogenesis as well as the corresponding transcription activities. Moreover, the findings also connect the changes in chromatin accessibility with cell reorientation, nuclear reorientation, and deformation. Our study may provide reference for directed differentiation of stem cells induced by mechanical microenvironments.

Biomechanical and biological responses of periodontium in orthodontic tooth movement: up-date in a new decade

Nowadays, orthodontic treatment has become increasingly popular. However, the biological mechanisms of orthodontic tooth movement (OTM) have not been fully elucidated. We were aiming to summarize the evidences regarding the mechanisms of OTM. Firstly, we introduced the research models as a basis for further discussion of mechanisms. Secondly, we proposed a new hypothesis regarding the primary roles of periodontal ligament cells (PDLCs) and osteocytes involved in OTM mechanisms and summarized the biomechanical and biological responses of the periodontium in OTM through four steps, basically in OTM temporal sequences, as follows: (1) Extracellular mechanobiology of periodontium: biological, mechanical, and material changes of acellular components in periodontium under orthodontic forces were introduced. (2) Cell strain: the sensing, transduction, and regulation of mechanical stimuli in PDLCs and osteocytes. (3) Cell activation and differentiation: the activation and differentiation mechanisms of osteoblast and osteoclast, the force-induced sterile inflammation, and the communication networks consisting of sensors and effectors. (4) Tissue remodeling: the remodeling of bone and periodontal ligament (PDL) in the compression side and tension side responding to mechanical stimuli and root resorption. Lastly, we talked about the clinical implications of the updated OTM mechanisms, regarding optimal orthodontic force (OOF), acceleration of OTM, and prevention of root resorption.

Investigation on the Composition of Agarose-Collagen I Blended Hydrogels as Matrices for the Growth of Spheroids from Breast Cancer Cell Lines

Three-dimensional (3D) cell culture systems mimic the structural complexity of the tissue microenvironment and are gaining increasing importance as they resemble the extracellular matrix (ECM)–cell and cell–cell physical interactions occurring in vivo. Several scaffold-based culture systems have been already proposed as valuable tools for large-scale production of spheroids, but they often suffer of poor reproducibility or high costs of production. In this work, we present a reliable 3D culture system based on collagen I-blended agarose hydrogels and show how the variation in the agarose percentage affects the physical and mechanical properties of the resulting hydrogel. The influence of the different physical and mechanical properties of the blended hydrogels on the growth, size, morphology, and cell motility of the spheroids obtained by culturing three different breast cancer cell lines (MCF-7, MDA-MB-361, and MDA-MB-231) was also evaluated. As proof of concept, the cisplatin penetration and its cytotoxic effect on the tumor spheroids as function of the hydrogel stiffness were also investigated. Noteworthily, the possibility to recover the spheroids from the hydrogels for further processing and other biological studies has been considered. This feature, in addition to the ease of preparation, the lack of cross-linking chemistry and the high reproducibility, makes this hydrogel a reliable biomimetic matrix for the growth of 3D cell structures.

Co-evolution of matrisome and adaptive adhesion dynamics drives ovarian cancer chemoresistance

Due to its dynamic nature, the evolution of cancer cell-extracellular matrix (ECM) crosstalk, critically affecting metastasis and treatment resistance, remains elusive. Our results show that platinum-chemotherapy itself enhances resistance by progressively changing the cancer cell-intrinsic adhesion signaling and cell-surrounding ECM. Examining ovarian high-grade serous carcinoma (HGSC) transcriptome and histology, we describe the fibrotic ECM heterogeneity at primary tumors and distinct metastatic sites, prior and after chemotherapy. Using cell models from systematic ECM screen to collagen-based 2D and 3D cultures, we demonstrate that both specific ECM substrates and stiffness increase resistance to platinum-mediated, apoptosis-inducing DNA damage via FAK and β1 integrin-pMLC-YAP signaling. Among such substrates around metastatic HGSCs, COL6 was upregulated by chemotherapy and enhanced the resistance of relapse, but not treatment-naïve, HGSC organoids. These results identify matrix adhesion as an adaptive response, driving HGSC aggressiveness via co-evolving ECM composition and sensing, suggesting stromal and tumor strategies for ECM pathway targeting.

Insensitivity of dental pulp stem cells migration to substrate stiffness

Dental pulp stem cells (DPSCs) are a promising cell source for regeneration of dental pulp. Migration is a key event but influence of the microenvironment rigidity (5 kPa at the center of dental pulp to 20 GPa for the dentin) is largely unknown. Mechanical signals are transmitted from the extracellular matrix to the cytoskeleton, to the nuclei, and to the chromatin, potentially regulating gene expression. To identify the microenvironmental influence on migration, we analyzed motility on PDMS substrates with stiffness increasing from 1.5 kPa up to 2.5 MPa. We found that migration speed slightly increases as substrate stiffness decreases in correlation with decreasing focal adhesion size. Motility is relatively insensitive to substrate stiffness, even on a bi-rigidity PDMS substrate where DPSCs migrate without preferential direction. Migration is independent of both myosin II activity and YAP translocation after myosin II inhibition. Additionally, inhibition of Arp2/3 complex leads to significant speed decrease for all rigidities, suggesting contribution of the lamellipodia in the migration. Interestingly, the chromatin architecture remains stable after a 7-days exposure on the PDMS substrates for all rigidity. To design scaffold mimicking dental pulp environment, similar DPSCs migration for all rigidity, leaves field open to choose this mechanical parameter.

Collagen hydrogels with controllable combined cues of elasticity and topography to regulate cellular processes

The elasticity, topography, and chemical composition of cell culture substrates influence cell behavior. However, the cellular responses toin vivoextracellular matrix (ECM), a hydrogel of proteins (mainly collagen) and polysaccharides, remain unknown as there is no substrate that preserves the key features of native ECM. This study introduces novel collagen hydrogels that can combine elasticity, topography, and composition and reproduce the correlation between collagen concentration (C) and elastic modulus (E) in native ECM. A simple reagent-free method based on radiation-cross-linking altered ECM-derived collagen I and hydrolyzed collagen (gelatin or collagen peptide) solutions into hydrogels with tunable elastic moduli covering a broad range of soft tissues (E= 1-236 kPa) originating from the final collagen density in the hydrogels (C= 0.3%-14%) and precise microtopographies (⩾1 μm). The amino acid composition ratio was almost unchanged by this method, and the obtained collagen hydrogels maintained enzyme-mediated degradability. These collagen hydrogels enabled investigation of the responses of cell lines (fibroblasts, epithelial cells, and myoblasts) and primary cells (rat cardiomyocytes) to soft topographic cues such as thosein vivounder the positive correlation betweenCandE. These cells adhered directly to the collagen hydrogels and chose to stay atop or spontaneously migrate into them depending onE, that is, the density of the collagen network,C. We revealed that the cell morphology and actin cytoskeleton organization conformed to the topographic cues, even when they are as soft asin vivoECM. The stiffer microgrooves on collagen hydrogels aligned cells more effectively, except HeLa cells that underwent drastic changes in cell morphology. These collagen hydrogels may not only reducein vivoandin vitrocell behavioral disparity but also facilitate artificial ECM design to control cell function and fate for applications in tissue engineering and regenerative medicine.

Microscopic local stiffening in a supramolecular hydrogel network expedites stem cell mechanosensing in 3D and bone regeneration

Dynamic hydrogels cross-linked by weak and reversible physical interactions enhance the 3-dimensional (3D) spreading and mechanosensing abilities of encapsulated cells in a matrix. However, the highly dynamic nature of these physical cross-links also results in low mechanical stiffness in the hydrogel network and high tether compliance of the cell adhesion motifs attached to the network. The resulting low force feedback of the soft hydrogel network impedes the efficient activation of mechanotransduction signalling in the encapsulated cells. Herein, we demonstrate that the chemical incorporation of acryloyl nanoparticle-based cross-linkers creates regionally stiff network structures in the dynamic supramolecular hydrogels without compromising the dynamic properties of the cell-adaptable inter-nanoparticle hydrogel network. The obtained dynamic hydrogels with a heterogeneous hydrogel network topology expedite the development of adhesion structures, 3D spreading, and mechanosensing of the encapsulated stem cells, as evidenced by the upregulated expression of key biomarkers such as vinculin, FAK, and YAP. This enhanced spreading and mechanotransduction promotes the osteogenic differentiation of the encapsulated stem cells. In contrast, doping with physically entrapped nanoparticles or molecular cross-linkers (PEGDA) cannot locally reinforce the dynamic hydrogel network and therefore fails to facilitate cell mechanosensing or differentiation in the 3D hydrogels. We further show that the dynamic hydrogels with a locally stiffened network promote the in situ regeneration of bone defects in an animal model. Our findings provide valuable insights into the design of the supramolecular dynamic hydrogels with biomimetic hierarchical biomechanical structures as the optimized carrier material for stem cell-based therapies.