Antibacterial effects of nanopillar surfaces are mediated by cell impedance, penetration and induction of oxidative stress

Precisely Engineered Photoreactive Titanium Nanoarray Coating to Mitigate Biofouling in Ultrafiltration

To combat biofouling on membranes, diverse nanostructures of titanium dioxide (TiO₂) have emerged as effective antimicrobial coatings due to TiO₂'s abilities to transport charge and photoinduce oxidation. However, TiO₂ composite polymeric membranes synthesized using traditional methods of growing crystals have proven chemically unstable, with loss of coating and diminishing antimicrobial performance. Thus, new fabrication methods to enhance durability and efficacy should be considered. In this work, we propose a stepwise approach to construct a stable, uniform TiO₂ nanoarray of regularly spaced, aligned crystals on the surface of a polytetrafluoroethylene ultrafiltration membrane using precisely controlled atomic layer deposition (ALD) followed by solvothermal deposition. We demonstrate that ALD can uniformly seed TiO₂ nanoparticles on the membrane surface with atomic-scale precision. Subsequently, solvothermal deposition assembles and aligns a uniform TiO₂ nanoarray forest. In the presence of sunlight, this TiO₂ nanoarray effectively inactivates any deposited bacteria, increasing flux recovery after membrane cleaning. By systematically investigating this antimicrobial activity, we found that TiO₂ both physically damages cell membranes as well as produces reactive oxygen species in the presence of sunlight that inactivate bacteria. Our study provides an effective bottom-up synthesis scheme to optimize and tailor antifouling TiO₂ coatings for ultrafiltration and other surfaces for a wide range of applications.

Red Microalgal Sulfated Polysaccharide-Cu2O Complexes: Characterization and Bioactivity

The anion-exchange capacity of the cell-wall sulfated polysaccharide of the red microalga Porphyridium sp. can be exploited for the complexation of metal ions (e.g., Cu, Zn, Ag) to produce novel materials with new bioactivities. In this study, we investigated this algal polysaccharide as a platform for the incorporation of copper as Cu₂O. Chemical and rheological characterization of the Cu₂O-polysaccharide complex showed that the copper is covalently bound to the polysaccharide and that the complex exhibits higher viscosity and conductivity than the native polysaccharide. Examination of the complex's inhibitory activity against the bacteria Acinetobacter baumannii, Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, and Bacillus subtilis and the fungus Candida albicans revealed a relatively high antimicrobial activity, especially against C. albicans (92% growth inhibition) as compared to the polysaccharide and to Cu₂O alone. The antibiofilm activity was also found against P. aeruginosa PA14 and C. albicans biofilms. An atomic force microscopy examination of the surface morphology of the complex revealed needle-like structures (spikes), approximately 10 nm thick, protruding from the complex surface to a maximum height of 1000 nm, at a density of about 5000/μm², which were not detected in the native polysaccharide. It seems that the spikes on the surface of the Cu₂O-polysaccharide complex are responsible for the antimicrobial activities of the complex, that is, for disruption of microbial membrane permeability, leading to cell death. The study thus indicates that the superior qualities of the novel material formed by complexion of Cu₂O to the polysaccharide should be studied further for various biotechnological applications.

Friction at nanopillared polymer surfaces beyond Amontons' laws: Stick-slip amplitude coefficient (SSAC) and multiparametric nanotribological properties

Frictional and nanomechanical properties of nanostructured polymer surfaces are important to their technological and biomedical applications. In this work, poly(ethylene terephthalate) (PET) surfaces with a periodic distribution of well-defined nanopillars were fabricated through an anodization/embossing process. The apparent surface energy of the nanopillared surfaces was evaluated using the Fowkes acid-base approach, and the surface morphology was characterized using scanning electron microscope (SEM) and atomic force microscope (AFM). The normal and lateral forces between a silica microparticle and these surfaces were quantified using colloidal probe atomic force microscopy (CP-AFM). The friction-load relationship followed Amonton's first law, and the friction coefficient appeared to scale linearly with the nanopillar height. Furthermore, all the nanopillared surfaces showed pronounced frictional instabilities compared to the smooth sliding friction loop on the flat control. Performing the stick-slip amplitude coefficient (SSAC) analysis, we found a correlation between the frictional instabilities and the nanopillars density, pull-off force and work of adhesion. We have summarised the dependence of the nanotribological properties on such nanopillared surfaces on five relevant parameters, i.e. pull-off force f_p, Amontons' friction coefficient μ, RMS roughness R_q, stick-slip amplitude friction coefficient SSAC, and work of adhesion between the substrate and water W_adh in a radar chart. Whilst demonstrating the complexity of the frictional behaviour of nanopillared polymer surfaces, our results show that analyses of multiparametric nanotribological properties of nanostructured surfaces should go beyond classic Amontons' laws, with the SSAC more representative of the frictional properties compared to the friction coefficient.

Theoretical and computational investigations into mechanobactericidal activity of nanostructures at the bacteria-biomaterial interface: a critical review

Mechanobactericidal surfaces kill bacteria upon contact by posing landscapes hostile to them and have rapidly gained popularity amongst researchers over the past decade. But several fundamental aspects of the physical interactions between bacteria and nanostructures and the underlying killing mechanisms are still poorly understood. This is partly attributable to the difficulties associated with the characterization of the bacteria-nanostructure interface in a biological environment during the killing process and to the stochastic and non-linear behaviors generally associated with biological systems. However, several analytical and computational models have presented and analyzed possible killing routes and have proven useful in understanding different aspects of the phenomena. Analytical models formulate equations, often based on energy considerations, and aim to predict optimal nanostructure dimensions. They are more widely used than computational models that try to simulate the killing process and the stress or strain fields in the cell membrane through numerical methods. These models provide insights into the forces responsible for the spontaneous penetration of the cell into the nanostructures, which are still highly debated in the field. They have also helped to correlate the nanostructure dimensions with their bactericidal activity to optimize such values and facilitate the translation of this technology to physiological conditions. This review focuses on the rupture of the bacterial cell wall by nanopillars or similar high aspect ratio structures and applying these principles to the deformation of the cell membrane. Many recent interesting experimental results that either refute our current understanding or have the potential to challenge the current consensus are also discussed. Lastly, the limitations of the current strategies and opportunities to address the unresolved gaps in the field are also presented.

Bacterial Antifouling Characteristics of Helicene-Graphene Films

Herein, we describe interfacially-assembled [7]helicene films that were deposited on graphene monolayer using the Langmuir-Schaefer deposition by utilizing the interactions of nonplanar (helicene) and planar (graphene) π–π interactions as functional antifouling coatings. Bacterial adhesion of Staphylococcus aureus on helicene—graphene films was noticeably lower than that on bare graphene, up to 96.8% reductions in bacterial adhesion. The promising bacterial antifouling characteristics of helicene films was attributed to the unique molecular geometry of helicene, i.e., nano-helix, which can hinder the nanoscale bacterial docking processes on a surface. We envision that helicene—graphene films may eventually be used as protective coatings against bacterial antifouling on the electronic components of clinical and biomedical devices.

Synergistic antibacterial activity of physical-chemical multi-mechanism by TiO2 nanorod arrays for safe biofilm eradication on implant

Treatment of implant-associated infection is becoming more challenging, especially when bacterial biofilms form on the surface of the implants. Developing multi-mechanism antibacterial methods to combat bacterial biofilm infections by the synergistic effects are superior to those based on single modality due to avoiding the adverse effects arising from the latter. In this work, TiO2 nanorod arrays in combination with irradiation with 808 near-infrared (NIR) light are proven to eradicate single specie biofilms by combining photothermal therapy, photodynamic therapy, and physical killing of bacteria. The TiO2 nanorod arrays possess efficient photothermal conversion ability and produce a small amount of reactive oxygen species (ROS). Physiologically, the combined actions of hyperthermia, ROS, and puncturing by nanorods give rise to excellent antibacterial properties on titanium requiring irradiation for only 15 min as demonstrated by our experiments conducted in vitro and in vivo. More importantly, bone biofilm infection is successfully treated efficiently by the synergistic antibacterial effects and at the same time, the TiO2 nanorod arrays improve the new bone formation around implants. In this protocol, besides the biocompatible TiO2 nanorod arrays, an extra photosensitizer is not needed and no other ions would be released. Our findings reveal a rapid bacteria-killing method based on the multiple synergetic antibacterial modalities with high biosafety that can be implemented in vivo and obviate the need for a second operation. The concept and antibacterial system described here have large clinical potential in orthopedic and dental applications.

Near-infrared light II - assisted rapid biofilm elimination platform for bone implants at mild temperature

Light-triggered therapy is a prospective method to combat implant-associated infection but near-infrared I (NIR-I) light has insufficient penetrating ability in tissues and local hyperthermia induced by the photothermal treatment may destroy surrounding healthy tissues. Herein, a near-infrared II (NIR-II) phototherapy system composed of upconversion elements doped titanium dioxide nanorods (TiO₂ NRs)/curcumin (Cur)/hyaluronic acid (HA)/bone morphogenetic protein-2 (BMP-2) is designed for biomedical titanium and demonstrated to overcome the above hurdles simultaneously. Incorporation of F, Yb, and Ho not only improves the photocatalytic ability, but also renders the implants with the upconversion capability, so that the NRs can generate enough reactive oxygen species (ROS) when irradiated by the NIR-II laser. Furthermore, the combined actions of quorum sensing inhibitors, ROS, and physical puncture by NRs eliminate Staphylococcus aureus biofilms on titanium rapidly at a mild temperature of 45 °C by only requiring irradiation with the 1060 nm laser for only 15 min in vitro and in vivo. The presence of Cur mitigates the immune response and BMP-2 improves osteogenic differentiation, thus accelerating new bone formation. This low-temperature NIR-II light-triggered antibacterial platform has large potential in combating deep-tissue infection in clinical applications.

Ag3PO4 decorated black urchin-like defective TiO2 for rapid and long-term bacteria-killing under visible light

Both phototherapy via photocatalysts and physical puncture by artificial nanostructures are promising substitutes for antibiotics when treating drug-resistant bacterial infectious diseases. However, the photodynamic therapeutic efficacy of photocatalysts is seriously restricted by the rapid recombination of photogenerated electron–hole pairs. Meanwhile, the nanostructures of physical puncture are limited to two-dimensional (2D) platforms, and they cannot be fully used yet. Thus, this research developed a synergistic system of Ag₃PO₄ nanoparticles (NPs), decorated with black urchin-like defective TiO₂ (BU–TiO_2-X/Ag₃PO₄). These NPs had a decreased bandgap compared to BU-TiO_2-X, and BU-TiO_2-X/Ag₃PO₄ (3:1) exhibited the lowest bandgap and the highest separation efficiency for photogenerated electron–hole pairs. After combination with BU-TiO_2-X, the photostability of Ag₃PO₄ improved because the oxygen vacancy of BU-TiO_2-X retards the reduction of Ag⁺ in Ag₃PO₄ into Ag⁰, thus reducing its toxicity. In addition, the nanospikes on the surface of BU-TiO_2-X can, from all directions, physically puncture bacterial cells, thus assisting the hybrid's photodynamic therapeutic effects, alongside the small amount of Ag⁺ released from Ag₃PO₄. This achieves synergy, endowing the hybrid with high antibacterial efficacy of 99.76 ± 0.15% and 99.85 ± 0.09% against Escherichia coli and Staphylococcus aureus, respectively, after light irradiation for 20 min followed by darkness for 12 h. It is anticipated that these findings may bring new insight for developing synergistic treatment strategies against bacterial infectious diseases or pathogenic bacterial polluted environments.

•

BU-TiO_2-X/Ag₃PO₄ (3:1) hybrid improved the photostability of Ag₃PO₄.

•

BU-TiO_2-X/Ag₃PO₄ (3:1) hybrid exhibited outstanding photodynamic therapeutic effects.

•

The nanospikes from all directions on the BU-TiO_2-X physically punctured bacterial cells.

•

The physical puncture combined with the Ag⁺ released by Ag₃PO₄ had long-term bacteriostatic efficacy.

Bacterial Envelope Damage Inflicted by Bioinspired Nanostructures Grown in a Hydrogel

Surface-associated bacterial communities, known as biofilms, are responsible for a broad spectrum of infections in humans. Recent studies have indicated that surfaces containing nanoscale protrusions, like those in dragonfly wings, create a hostile niche for bacterial colonization and biofilm growth. This functionality has been mimicked on metals and semiconductors by creating nanopillars and other high aspect ratio nanostructures at the interface of these materials. However, bactericidal topographies have not been reported on clinically relevant hydrogels and highly compliant polymers, mostly because of the complexity of fabricating nanopatterns in hydrogels with precise control of the size that can also resist aqueous immersion. Here, we report the fabrication of bioinspired bactericidal nanostructures in bacterial cellulose (BC) hydrogels using low-energy ion beam irradiation. By challenging the currently accepted view, we show that the nanostructures grown in BC affect preferentially stiff membranes like those of the Gram-positive bacteria Bacillus subtilis in a time-dependent manner and, to a lesser extent, the more deformable and softer membrane of Escherichia coli. Moreover, the nanostructures in BC did not affect the viability of murine preosteoblasts. Using single-cell analysis, we demonstrate that indeed B. subtilis requires less force than E. coli to be penetrated by nanoprobes with dimensions comparable to those of the nanostructured BC, providing the first direct experimental evidence validating a mechanical model of membrane rupture via a tension-induced mechanism within the activation energy theory. Our findings bridge the gap between mechano-bactericidal surfaces and low-dimensional materials, including single-walled carbon nanotubes and graphene nanosheets, in which a higher bactericidal activity toward Gram-positive bacteria has been extensively reported. Our results also demonstrate the ability to confer bactericidal properties to a hydrogel by only altering its topography at the nanoscale and contribute to a better understanding of the bacterial mechanobiology, which is fundamental for the rational design bactericidal topographies.

Synergistic Antimicrobial Activity of a Nanopillar Surface on a Chitosan Hydrogel

Despite ongoing efforts and technology development, the contamination of medical device surfaces by disease-causing microbes remains problematic. Two approaches to producing antimicrobial surfaces are using antimicrobial materials and applying physical topography such as nanopatterns. In this work, we describe the use of physical topography on a soft hydrogel to control microbial growth. We demonstrate this approach by using chitosan hydrogel films with nanopillars having periodicities ranging from 300 to 500 nm. The flat hydrophilic chitosan films exhibit antimicrobial activity against the pathogenic bacteria Pseudomonas aeruginosa and filamentous fungi Fusarium oxysporum. The addition of nanopillars to the hydrogel surface further reduces the growth of P. aeruginosa and F. oxysporum up to ∼52 and ∼99%, respectively. Multiple modes of antimicrobial action appear to act synergistically to inhibit microbial growth on the nanopillar hydrogels. We verified that the strongly bactericidal and fungicidal nanopillared material retains biocompatibility to human epithelial cells with the MTT assay. The nanopillared material is a promising candidate for applications that require a biocompatible and antimicrobial film. The study demonstrates that taking advantage of multiple modes of antimicrobial action can effectively inhibit pathogenic microbial growth.

Antibacterial hydrogel coating: Strategies in surface chemistry

Hydrogels have emerged as promising antimicrobial materials due to their unique three-dimensional structure, which provides sufficient capacity to accommodate various materials, including small molecules, polymers and particles. Coating substrates with antibacterial hydrogel layers has been recognized as an effective strategy to combat bacterial colonization. To prevent possible delamination of hydrogel coatings from substrates, it is crucial to attach hydrogel layers via stronger links, such as covalent bonds. To date, various surface chemical strategies have been developed to introduce hydrogel coatings on different substrates. In this review, we first give a brief introduction of the major strategies for designing antibacterial coatings. Then, we summarize the chemical methods used to fix the antibacterial hydrogel layer on the substrate, which include surface-initiated graft crosslinking polymerization, anchoring the hydrogel layer on the surface during crosslinking, and chemical crosslinking of layer-by-layer coating. The reaction mechanisms of each method and matched pretreatment strategies are systemically documented with the aim of introducing available protocols to researchers in related fields for designing hydrogel-coated antibacterial surfaces.

Ultrafast physical bacterial inactivation and photocatalytic self-cleaning of ZnO nanoarrays for rapid and sustainable bactericidal applications

Various nanostructured surfaces have been developed recently to physically inactivate bacteria, for reducing the rapidly spreading threat of pathogenic bacteria. However, it generally takes several hours for these surfaces to inactivate most of the bacteria, which greatly limits their application in the fields favoring rapid bactericidal performance. Besides, the accumulated bacteria debris left on these surfaces is rarely discussed in the previous reports. Herein we report the nanotip-engineered ZnO nanoarrays (NAs) with ultrafast physical bactericidal rate and the ability to photocatalytically remove the bacteria debris. Neither chemical (Zn2+ or reactive oxygen species) nor photocatalytic effect leads to the ultrafast bactericidal rate, where 97.5% of E. coli and 94.9% of S. aureus are inactivated within only 1 min. The simulation analysis further supported our proposed mechanism attributing the ultrafast bactericidal activity to the great stress enabled by the uneven topography. Moreover, the re-exposure of the ZnO NAs nanotips can be achieved in only 10 min under a mild UV light source. This study not only presents an ultrafast physical bactericidal activity, but also demonstrates the potential of the recyclable and photocatalytic self-cleaning functions of theses surfaces for applications that desire rapid and sustainable bactericidal performance.

Combating Implant Infections: Shifting Focus from Bacteria to Host

The widespread use of biomaterials to support or replace body parts is increasingly threatened by the risk of implant-associated infections. In the quest for finding novel anti-infective biomaterials, there generally has been a one-sided focus on biomaterials with direct antibacterial properties, which leads to excessive use of antibacterial agents, compromised host responses, and unpredictable effectiveness in vivo. This review sheds light on how host immunomodulation, rather than only targeting bacteria, can endow biomaterials with improved anti-infective properties. How antibacterial surface treatments are at risk to be undermined by biomaterial features that dysregulate the protection normally provided by critical immune cell subsets, namely, neutrophils and macrophages, is discussed. Accordingly, how the precise modification of biomaterial surface biophysical cues, or the incorporation of immunomodulatory drug delivery systems, can render biomaterials with the necessary immune-compatible and immune-protective properties to potentiate the host defense mechanisms is reviewed. Within this context, the protective role of host defense peptides, metallic particles, quorum sensing inhibitors, and therapeutic adjuvants is discussed. The highlighted immunomodulatory strategies may lay a foundation to develop anti-infective biomaterials, while mitigating the increasing threat of antibacterial drug resistance.

Biomimetic Functional Surfaces towards Bactericidal Soft Contact Lenses

The surface with high-aspect-ratio nanostructure is observed to possess the bactericidal properties, where the physical interaction between high-aspect-ratio nanostructure could exert sufficient pressure on the cell membrane eventually lead to cell lysis. Recent studies in the interaction mechanism and reverse engineering have transferred the bactericidal capability to artificial surface, but the biomimetic surfaces mimicking the topographical patterns on natural resources possess different geometrical parameters and surface properties. The review attempts to highlight the recent progress in bactericidal nanostructured surfaces to analyze the prominent influence factors and cell rupture mechanism. A holistic approach was utilized, integrating interaction mechanisms, material characterization, and fabrication techniques to establish inclusive insights into the topographical effect and mechano-bactericidal applications. The experimental work presented in the hydrogel material field provides support for the feasibility of potentially broadening applications in soft contact lenses.

Probing the interaction of ciprofloxacin and E. coli by electrochemistry, spectroscopy and atomic force microscopy

Under the present investigation, effect of ciprofloxacin (CIP) on Escherichia coli has been investigated using electrochemical, spectroscopic and atomic force microscope (AFM) measurements. Investigation reveals the interaction pattern of CIP with E. coli. The CIP essentially interacts with the outer membrane protein F (OmpF), the formation constant of the complex forms between CIP and the OmpF active sites over E. coli is obtained as log K_f of 12.1. Spectroscopic measurements are carried out, which supports the electrochemical measurements on the interaction between CIP and E. coli, at a higher concentration, CIP induces lysis of the E. coli cell membrane. Spectroscopic investigations further reveals that the FeS containing proteins present inside the E. coli cells released out through the ruptured cell membrane of E. coli. Different degrees of detrimental effects on E. coli has been observed when exposed to different concentrations of the drugs. The microscopic images obtained from the AFM scans of E. coli in presence of CIP shows deformation of the E. coli cell wall and its rupture with increasing concentrations of CIP.

Protruding Nanostructured Surfaces for Antimicrobial and Osteogenic Titanium Implants

Protruding nanostructured surfaces have gained increasing interest due to their unique wetting behaviours and more recently their antimicrobial and osteogenic properties. Rapid development in nanofabrication techniques that offer high throughput and versatility on titanium substrate open up the possibility for better orthopaedic and dental implants that deter bacterial colonisation while promoting osteointegration. In this review we present a brief overview of current problems associated with bacterial infection of titanium implants and of efforts to fabricate titanium implants that have both bactericidal and osteogenic properties. All of the proposed mechano-bactericidal mechanisms of protruding nanostructured surfaces are then considered so as to explore the potential advantages and disadvantages of adopting such novel technologies for use in future implant applications. Different nanofabrication methods that can be utilised to fabricate such nanostructured surfaces on titanium substrate are briefly discussed.

Resolving Bio-Nano Interactions of E. coli Bacteria-Dragonfly Wing Interface with Helium Ion and 3D-Structured Illumination Microscopy to Understand Bacterial Death on Nanotopography

Obtaining a comprehensive understanding of the bactericidal mechanisms of natural nanotextured surfaces is crucial for the development of fabricated nanotextured surfaces with efficient bactericidal activity. However, the scale, nature, and speed of bacteria-nanotextured surface interactions make the characterization of the interaction a challenging task. There are currently several different opinions regarding the possible mechanisms by which bacterial membrane damage occurs upon interacting with nanotextured surfaces. Advanced imaging methods could clarify this by enabling visualization of the interaction. Charged particle microscopes can achieve the required nanoscale resolution but are limited to dry samples. In contrast, light-based methods enable the characterization of living (hydrated) samples but are limited by the resolution achievable. Here we utilized both helium ion microscopy (HIM) and 3D structured illumination microscopy (3D-SIM) techniques to understand the interaction of Gram-negative bacterial membranes with nanopillars such as those found on dragonfly wings. Helium ion microscopy enables cutting and imaging at nanoscale resolution, while 3D-SIM is a super-resolution optical microscopy technique that allows visualization of live, unfixed bacteria at ∼100 nm resolution. Upon bacteria-nanopillar interaction, the energy stored due to the bending of natural nanopillars was estimated and compared with fabricated vertically aligned carbon nanotubes. With the same deflection, shorter dragonfly wing nanopillars store slightly higher energy compared to carbon nanotubes. This indicates that fabricated surfaces may achieve similar bactericidal efficiency as dragonfly wings. This study reports in situ characterization of bacteria-nanopillar interactions in real-time close to its natural state. These microscopic approaches will help further understanding of bacterial membrane interactions with nanotextured surfaces and the bactericidal mechanisms of nanotopographies so that more efficient bactericidal nanotextured surfaces can be designed and fabricated, and their bacteria-nanotopography interactions can be assessed in situ.

Functionalization of Polymers and Nanomaterials for Biomedical Applications: Antimicrobial Platforms and Drug Carriers

The use of polymers and nanomaterials has vastly grown for industrial and biomedical sectors during last years. Before any designation or selection of polymers and their nanocomposites, it is vital to recognize the targeted applications which require these platforms to be modified. Surface functionalization to introduce the desired type and quantity of reactive functional groups to target a cell or tissue in human body is a pivotal approach to improve the physicochemical and biological properties of these materials. Herein, advances in the functionalized polymer and nanomaterials surfaces are highlighted along with their applications in biomedical fields, e.g., antimicrobial therapy and drug delivery.

β-NaYF4:Yb,Er,Gd nanorods@1T/2H-MoS2 for 980 nm NIR-triggered photocatalytic bactericidal properties

Fabrication of β-NaYF₄:Yb,Er,Gd@1T/2H-MoS₂ nanocomposites for NIR-driven photocatalytic sterilization of Escherichia coli.

Iron-based nano-structured surfaces with antimicrobial properties

Bactericidal nanopillar array surfaces of FeOOH and Fe₂O₃ have been prepared as a cicada wing mimic. An even simpler structure-based antimicrobial surface was also made by coating with sea urchin-like FeOOH and Fe₂O₃ particles with a binder.