Atomically dispersed antimony on carbon nitride for the artificial photosynthesis of hydrogen peroxide

Environmental application of chlorine-doped graphitic carbon nitride: Continuous solar-driven photocatalytic production of hydrogen peroxide

Solar-driven photocatalytic generation of H₂O₂ over metal-free catalysts is a sustainable approach for value-added chemical production. Here, we synthesized chlorine-doped graphitic carbon nitride (Cl-doped g-C₃N₄) through a solvothermal method to effectively produce H₂O₂ with a rate of 1.19 ± 0.06 µM min^-1 under visible light irradiation, which was improved by 104 times compared to pristine g-C₃N₄. Continuous net production of H₂O₂ was realized at a rate of 2.78 ± 0.10 µM min^-1 up to 54 h with isopropanol as the hole scavenger, whereas H₂O₂ production was only sustained for ~ 6 h without scavengers. Both molecular simulations and advanced spectroscopic characterizations elucidated that the Cl dopant increased the charge transfer rate, decreased the bandgap, and reduced the activation energy of the rate-limiting step of O₂ reduction, all of which favored H₂O₂ production. This work implemented a novel metal-free photocatalyst for sustainable H₂O₂ production and elucidated the mechanism for promoting H₂O₂ production that can guide future photoreactive nanomaterial design.

Synergies of Adjacent Sites in Atomically Dispersed Ruthenium toward Achieving Stable Hydrogen Evolution

It is a challenge to fabricate atomically dispersed metal clusters in polymeric carbon nitride (PCN) for durable photocatalytic reactions owing to the thermodynamic stability limitation. Herein, atomically dispersed Ru clusters are implanted into the PCN skeleton matrix based on an ionic diffusion and coordination (IDC) strategy, the stability of which is improved owing to the robust Ru-N bonds in the formed RuN₄ and RuN₃ configurations. Additionally, RuN₄ and RuN₃ as charge transport bridges between two adjacent melon strands efficaciously conquer hydrogen bond restriction in the skeleton to facilitate the in-plane mobility and separation of charge carriers. Moreover, the synergistic effect of adjacent Ru atoms is triggered on the assembled RuN₃-RuN₄ and RuN₃-RuN₃ in the atomically dispersed Ru clusters to significantly decrease hydrogen adsorption energy. As a result, the optimal PCN-Ru photocatalyst achieves nearly 6 times higher than the photocatalytic hydrogen evolution (PHE) rate of the Pt/PCN benchmark and maintains the long-term stable running for 104 h of 26 cycles; its overall PHE performance is far superior to the most of single atoms supported on g-C₃N₄ photocatalysts reported. The findings here gain new insight into the preparation strategy, structure configuration, and reaction mechanism for atomically dispersed metal clusters supported on PCN, which further stimulates the intensive investigations toward developing more efficient and stable PCN-like photocatalytic materials.

W Single-Atom Catalyst for CH4 Photooxidation in Water Vapor

Solar-driven high-efficiency and direct conversion of methane into high-value-added liquid oxygenates against overoxidation remains a great challenge. Herein, facile and mass fabrication of low-cost tungsten single-atom photocatalysts is achieved by directly calcining urea and sodium tungstate under atmosphere (W-SA-PCN-m, urea amount m = 7.5, 15, 30, and 150 g). The single-atom photocatalysts can manage H₂ O₂ in situ generation and decomposition into ·OH, thus achieving highly efficient CH₄ photooxidation in water vapor under mild conditions. Systematic investigations demonstrate that integration of multifunctions of methane activation, H₂ O₂ generation, and decomposition into one photocatalyst can dramatically promote methane conversion to C1 oxygenates with a yield as high as 4956 µmol g_cat ^-1 , superior to that of the most reported non-precious photocatalysts. Liquid-solid phase transition can induce the products to facilely switch in from HCOOH to CH₃ OH by pulling the catalyst above water with CH₃ OH/HCOOH ratio from 10% (in H₂ O) to 80% (above H₂ O).

Self-Regulating Solar Steam Generators Enable Volatile Organic Compound Removal through In Situ H2O2 Generation

Interfacial solar steam generation for clean water production suffers from volatile organic compound (VOC) contamination during solar-to-steam conversion. Here, we present a solar steam generator based on the integration of melamine foam (MF), polydopamine (PDA), and Ag/AgCl particles. Together with the high photothermal conversion efficiency (ca. 87.8%, 1 kW/m²) achieved by the PDA thin film, the Ag/AgCl particles can efficiently activate the localized generation of H₂O₂ and •OH in situ, thus degrading the VOCs during the rapid vapor generation. The generation of H₂O₂ and •OH in situ also facilitates the creation of a buffer zone containing H₂O₂ and •OH for the rapid removal of organic pollutants in the surrounding water attracted to the solar vapor generator, demonstrating a self-cleaning steam generator toward various volatile compounds such as phenol, aniline, 2,4-dichlorophenol, and N,N-dimethylformamide in a wide range of concentrations.

A Unique Fe-N4 Coordination System Enabling Transformation of Oxygen into Superoxide for Photocatalytic CH Activation with High Efficiency and Selectivity

Selective oxidation of CH bonds is one of the most important reactions in organic synthesis. However, activation of the α-CH bond of ethylbenzene by use of photocatalysis-generated superoxide anions (O₂ ^•- ) remains a challenge. Herein, the formation of individual Fe atoms on polymeric carbon nitride (CN), that activates O₂  to create O₂ ^•- for facilitating the reaction of ethylbenzene to form acetophenone, is demonstrated. By utilizing density functional theory and materials characterization techniques, it is shown that individual Fe atoms are coordinated to four N atoms of CN and the resultant low-spin Fe-N₄  system (t_2g ⁶ e_g ⁰ ) is not only a great adsorption site for oxygen molecules, but also allows for fast transfer of electrons generated in the CN framework to adsorbed O₂ , producing O₂ ^•- . The oxidation reaction of ethylbenzene triggered by O₂ ^•- ions turns out to have a high conversion rate of 99% as well as an acetophenone selectivity of 99%, which can be ascribed to a novel reaction pathway that is different from the conventional route involving hydroxyl radicals and the production of phenethyl alcohol. Furthermore, it possesses great potential for other CH activation reactions besides ethylbenzene oxidation.

Polarization Engineering of Covalent Triazine Frameworks for Highly Efficient Photosynthesis of Hydrogen Peroxide from Molecular Oxygen and Water

Two-electron oxygen photoreduction to hydrogen peroxide (H₂ O₂ ) is seriously inhibited by its sluggish charge kinetics. Herein, a polarization engineering strategy is demonstrated by grafting (thio)urea functional groups onto covalent triazine frameworks (CTFs), giving rise to significantly promoted charge separation/transport and obviously enhanced proton transfer. The thiourea-functionalized CTF (Bpt-CTF) presents a substantial improvement in the photocatalytic H₂ O₂ production rate to 3268.1 µmol h^-1 g^-1 with no sacrificial agents or cocatalysts that is over an order of magnitude higher than unfunctionalized CTF (Dc-CTF), and a remarkable quantum efficiency of 8.6% at 400 nm. Mechanistic studies reveal the photocatalytic performance is attributed to the prominently enhanced two-electron oxygen reduction reaction by forming endoperoxide at the triazine unit and highly concentrated holes at the thiourea site. The generated O₂ from water oxidation is subsequently consumed by the oxygen reduction reaction (ORR), thereby boosting overall reaction kinetics. The findings suggest a powerful functional-groups-mediated polarization engineering method for the development of highly efficient metal-free polymer-based photocatalysts.

Heat-fueled enzymatic cascade for selective oxyfunctionalization of hydrocarbons

Heat is a fundamental feedstock, where more than 80% of global energy comes from fossil-based heating process. However, it is mostly wasted due to a lack of proper techniques of utilizing the low-quality waste heat (<100 °C). Here we report thermoelectrobiocatalytic chemical conversion systems for heat-fueled, enzyme-catalyzed oxyfunctionalization reactions. Thermoelectric bismuth telluride (Bi₂Te₃) directly converts low-temperature waste heat into chemical energy in the form of H₂O₂ near room temperature. The streamlined reaction scheme (e.g., water, heat, enzyme, and thermoelectric material) promotes enantio- and chemo-selective hydroxylation and epoxidation of representative substrates (e.g., ethylbenzene, propylbenzene, tetralin, cyclohexane, cis-β-methylstyrene), achieving a maximum total turnover number of rAaeUPO (TTN_rAaeUPO) over 32000. Direct conversion of vehicle exhaust heat into the enantiopure enzymatic product with a rate of 231.4 μM h⁻¹ during urban driving envisions the practical feasibility of thermoelectrobiocatalysis.

Thermoelectric materials enable us to convert heat into electricity, but their application has been limited to high-temperature heat sources. Here, the authors show the direct conversion of low-grade waste heat into chemical energy via combining thermoelectric materials with biocatalysts below 100 °C.

Single Atom Catalysts for Selective Methane Oxidation to Oxygenates

Direct conversion of methane (CH₄) to C_1-2 liquid oxygenates is a captivating approach to lock carbons in transportable value-added chemicals, while reducing global warming. Existing approaches utilizing the transformation of CH₄ to liquid fuel via tandemized steam methane reforming and the Fischer-Tropsch synthesis are energy and capital intensive. Chemocatalytic partial oxidation of methane remains challenging due to the negligible electron affinity, poor C-H bond polarizability, and high activation energy barrier. Transition-metal and stoichiometric catalysts utilizing harsh oxidants and reaction conditions perform poorly with randomized product distribution. Paradoxically, the catalysts which are active enough to break C-H also promote overoxidation, resulting in CO₂ generation and reduced carbon balance. Developing catalysts which can break C-H bonds of methane to selectively make useful chemicals at mild conditions is vital to commercialization. Single atom catalysts (SACs) with specifically coordinated metal centers on active support have displayed intrigued reactivity and selectivity for methane oxidation. SACs can significantly reduce the activation energy due to induced electrostatic polarization of the C-H bond to facilitate the accelerated reaction rate at the low reaction temperature. The distinct metal-support interaction can stabilize the intermediate and prevent the overoxidation of the reaction products. The present review accounts for recent progress in the field of SACs for the selective oxidation of CH₄ to C_1-2 oxygenates. The chemical nature of catalytic sites, effects of metal-support interaction, and stabilization of intermediate species on catalysts to minimize overoxidation are thoroughly discussed with a forward-looking perspective to improve the catalytic performance.

Photocatalytic Abstraction of Hydrogen Atoms from Water Using Hydroxylated Graphitic Carbon Nitride for Hydrogenative Coupling Reactions

Employing pure water, the ultimate green source of hydrogen donor to initiate chemical reactions that involve a hydrogen atom transfer (HAT) step is fascinating but challenging due to its large H−O bond dissociation energy (BDE_H‐O=5.1 eV). Many approaches have been explored to stimulate water for hydrogenative reactions, but the efficiency and productivity still require significant enhancement. Here, we show that the surface hydroxylated graphitic carbon nitride (gCN−OH) only requires 2.25 eV to activate H−O bonds in water, enabling abstraction of hydrogen atoms via dehydrogenation of pure water into hydrogen peroxide under visible light irradiation. The gCN−OH presents a stable catalytic performance for hydrogenative N−N coupling, pinacol‐type coupling and dehalogenative C−C coupling, all with high yield and efficiency, even under solar radiation, featuring extensive impacts in using renewable energy for a cleaner process in dye, electronic, and pharmaceutical industries.

Efficient Generation of Hydrogen Peroxide and Formate by an Organic Polymer Dots Photocatalyst in Alkaline Conditions

A photocatalyst comprising binary organic polymer dots (Pdots) was prepared. The Pdots were constructed from poly(9,9-dioctylfluorene-alt-benzothiadiazole), as an electron donor, and 1-[3-(methoxycarbonyl)propyl]-1-phenyl-[6.6]C₆₁ , as an electron acceptor. The photocatalyst produces H₂ O₂ in alkaline conditions (1 M KOH) with a production rate of up to 188 mmol h^-1  g^-1 . The external quantum efficiencies were 30 % (5 min) and 14 % (75 min) at 450 nm. Furthermore, photo-oxidation of methanol by Pdots, followed by a disproportionation reaction and an oxidation reaction, produced the high-value chemical formate. On the basis of various spectroscopic and electrochemical measurements, the photophysical processes of the system were studied in detail and a reaction mechanism was proposed.

Surface Modification of 2D Photocatalysts for Solar Energy Conversion

2D materials show many particular properties, such as high surface-to-volume ratio, high anisotropic degree, and adjustable chemical functionality. These unique properties in 2D materials have sparked immense interest due to their applications in photocatalytic systems, resulting in significantly enhanced light capture, charge-transfer kinetics, and surface reaction. Herein, the research progress in 2D photocatalysts based on varied compositions and functions, followed by specific surface modification strategies, is introduced. Fundamental principles focusing on light harvesting, charge separation, and molecular adsorption/activation in the 2D-material-based photocatalytic system are systemically explored. The examples described here detail the use of 2D materials in various photocatalytic energy-conversion systems, including water splitting, carbon dioxide reduction, nitrogen fixation, hydrogen peroxide production, and organic synthesis. Finally, by elaborating the challenges and possible solutions for developing these 2D materials, the review is expected to provide some inspiration for the future research of 2D materials used on efficient photocatalytic energy conversions.

Efficient Production of Solar Hydrogen Peroxide Using Piezoelectric Polarization and Photoinduced Charge Transfer of Nanopiezoelectrics Sensitized by Carbon Quantum Dots

Piezoelectric semiconductors have emerged as redox catalysts, and challenges include effective conversion of mechanical energy to piezoelectric polarization and achieving high catalytic activity. The catalytic activity can be enhanced by simultaneous irradiation of ultrasound and light, but the existing piezoelectric semiconductors have trouble absorbing visible light. A piezoelectric catalyst is designed and tested for the generation of hydrogen peroxide (H₂ O₂ ). It is based on Nb-doped tetragonal BaTiO₃ (BaTiO₃ :Nb) and is sensitized by carbon quantum dots (CDs). The photosensitizer injects electrons into the conduction band of the semiconductor, while the piezoelectric polarization directed electrons to the semiconductor surface, allowing for a high-rate generation of H₂ O₂ . The piezoelectric polarization field restricts the recombination of photoinduced electron-hole pairs. A production rate of 1360 µmol g_catalyst ^-1  h^-1  of H₂ O₂  is achieved under visible light and ultrasound co-irradiation. Individual piezo- and photocatalysis yielded lower production rates. Furthermore, the CDs enhance the piezocatalytic activity of the BaTiO₃ :Nb. It is noted that moderating the piezoelectricity of BaTiO₃ :Nb via microstructure modulation influences the piezophotocatalytic activity. This work shows a new methodology for synthesizing H₂ O₂  by using visible light and mechanical energy.

Spontaneous exciton dissociation in organic photocatalyst under ambient conditions for highly efficient synthesis of hydrogen peroxide

SignificanceHydrogen peroxide is a highly competitive ready-to-use product for solar energy transformation. Nevertheless, the contemporary photosynthetic systems are not efficient enough, due to severe charge recombination caused by high activation energy and binding energy of the exciton. Herein, we achieve spontaneous exciton dissociation at room temperature. Moreover, the photosynthesis of H2O2 reaches between 9,366 and 12,324 µmol·g-1 from 9 AM to 4 PM in ambient conditions, that is, sunlight irradiation, real water including fresh water and seawater, room temperature, and open air. The ultrahigh photocatalytic efficiency in ambient conditions allows the solar-to-chemical conversion in a real cost-effective and sustainable way, which represents an important step toward real applications.

Noble Metal-Free Inorganic Photocatalyst Consisting of Antimony-Doped Tin Oxide Nanorod and Titanium oxide for Two-Electron Oxygen Reduction Reaction

This study reports a noble metal-free robust inorganic photocatalyst for H 2 O 2 synthesis via two-electron oxygen reduction reaction (ORR). Antimony-doped tin oxide nanorods were heteroepitaxially grown from rutile TiO 2 seed crystals with an orientation of (001)ATO//(001)TiO 2 (ATO-NR//TiO 2 , // denotes heteroepitaxial junction) by a hydrothermal method. UV-light irradiation of ATO-NR//TiO 2 particles stably and continuously produces H 2 O 2 from aerated aqueous solution of ethanol. Electrochemical measurements using rotating electrodes show that Sb-doping into SnO 2 greatly enhances the electrocatalytic activity for two-electron ORR. The striking photocatalytic activity of ATO-NR//TiO 2 stems from the effective charge separation, electrocatalytic activity for two-electron ORR, and low catalytic activity for H 2 O 2 decomposition.

Kinetically restrained oxygen reduction to hydrogen peroxide with nearly 100% selectivity

Hydrogen peroxide has been synthesized mainly through the electrocatalytic and photocatalytic oxygen reduction reaction in recent years. Herein, we synthesize a single-atom rhodium catalyst (Rh₁/NC) to mimic the properties of flavoenzymes for the synthesis of hydrogen peroxide under mild conditions. Rh₁/NC dehydrogenates various substrates and catalyzes the reduction of oxygen to hydrogen peroxide. The maximum hydrogen peroxide production rate is 0.48 mol g_catalyst^-1 h^-1 in the phosphorous acid aerobic oxidation reaction. We find that the selectivity of oxygen reduction to hydrogen peroxide can reach 100%. This is because a single catalytic site of Rh₁/NC can only catalyze the removal of two electrons per substrate molecule; thus, the subsequent oxygen can only obtain two electrons to reduce to hydrogen peroxide through the typical two-electron pathway. Similarly, due to the restriction of substrate dehydrogenation, the hydrogen peroxide selectivity in commercial Pt/C-catalyzed enzymatic reactions can be found to reach 75%, which is 30 times higher than that in electrocatalytic oxygen reduction reactions.

Multifunctional and Transformative Metaphotonics with Emerging Materials

Future technologies underpinning multifunctional physical and chemical systems and compact biological sensors will rely on densely packed transformative and tunable circuitry employing nanophotonics. For many years, plasmonics was considered as the only available platform for subwavelength optics, but the recently emerged field of resonant metaphotonics may provide a versatile practical platform for nanoscale science by employing resonances in high-index dielectric nanoparticles and metasurfaces. Here, we discuss the recently emerged field of metaphotonics and describe its connection to material science and chemistry. For tunabilty, metaphotonics employs a variety of the recently highlighted materials such as polymers, perovskites, transition metal dichalcogenides, and phase change materials. This allows to achieve diverse functionalities of metasystems and metasurfaces for efficient spatial and temporal control of light by employing multipolar resonances and the physics of bound states in the continuum. We anticipate expanding applications of these concepts in nanolasers, tunable metadevices, metachemistry, as well as a design of a new generation of chemical and biological ultracompact sensing devices.

Selectively anchoring single atoms on specific sites of supports for improved oxygen evolution

The homogeneity of single-atom catalysts is only to the first-order approximation when all isolated metal centers interact identically with the support. Since the realistic support with various topologies or defects offers diverse coordination environments, realizing real homogeneity requires precise control over the anchoring sites. In this work, we selectively anchor Ir single atoms onto the three-fold hollow sites (Ir₁/T_O–CoOOH) and oxygen vacancies (Ir₁/V_O–CoOOH) on defective CoOOH surface to investigate how the anchoring sites modulate catalytic performance. The oxygen evolution activities of Ir₁/T_O–CoOOH and Ir₁/V_O–CoOOH are improved relative to CoOOH through different mechanisms. For Ir₁/T_O–CoOOH, the strong electronic interaction between single-atom Ir and the support modifies the electronic structure of the active center for stronger electronic affinity to intermediates. For Ir₁/V_O–CoOOH, a hydrogen bonding is formed between the coordinated oxygen of single-atom Ir center and the oxygenated intermediates, which stabilizes the intermediates and lowers the energy barrier of the rate-determining step.

While single-atom catalysts offer well-defined structures, the homogeneity of the active sites is determined by localized coordination environments. Here, authors anchor Ir single atoms onto different sites on CoOOH and show how their distinct coordinations activate oxygen-evolving electrocatalysis

Molecularly Engineered Covalent Organic Frameworks for Hydrogen Peroxide Photosynthesis

Synthesizing H₂ O₂ from water and air via a photocatalytic approach is ideal for efficient production of this chemical at small-scale. However, the poor activity and selectivity of the 2 e^- water oxidation reaction (WOR) greatly restricts the efficiency of photocatalytic H₂ O₂ production. Herein we prepare a bipyridine-based covalent organic framework photocatalyst (denoted as COF-TfpBpy) for H₂ O₂ production from water and air. The solar-to-chemical conversion (SCC) efficiency at 298 K and 333 K is 0.57 % and 1.08 %, respectively, which are higher than the current reported highest value. The resulting H₂ O₂ solution is capable of degrading pollutants. A mechanistic study revealed that the excellent photocatalytic activity of COF-TfpBpy is due to the protonation of bipyridine monomer, which promotes the rate-determining reaction (2 e^- WOR) and then enhances Yeager-type oxygen adsorption to accelerate 2 e^- one-step oxygen reduction. This work demonstrates, for the first time, the COF-catalyzed photosynthesis of H₂ O₂ from water and air; and paves the way for wastewater treatment using photocatalytic H₂ O₂ solution.

Facilitating Hot Electron Injection from Graphene to Semiconductor by Rectifying Contact for Vis-NIR-Driven H2 O2 Production

Solar-driven production of hydrogen peroxide (H₂ O₂ ), as an important industrial chemical oxidant with an extensive range of applications, from oxygen reduction is a sustainable alternative to mainstream anthraquinone oxidation and direct hydrogenation of dioxygen methods. The efficiency of solar to hydrogen peroxide over semiconductor-based photocatalysts is still largely limited by the narrow light absorption to visible light. Here, the authors proposed and demonstrate the proof-of-concept application of light-generated hot electrons in a graphene/semiconductor (exemplified with widely used TiO₂ ) dyad to largely extend visible light spectra up to 800 nm for efficient H₂ O₂ production. The well-designed graphene/semiconductor heterojunction has a rectifying interface with a zero barrier for the hot electron injection, largely boosting excited hot electrons with an average lifetime of ≈0.5 ps into charge carriers with a long fluorescent lifetime (4.0 ns) for subsequent H₂ O₂ production. The optimized dyadic photocatalyst can provide an H₂ O₂ yield of 0.67 mm g^-1  h^-1 under visible light irradiation (λ ≥ 400 nm), which is 20 times of the state-of-the-art noble-metal-free titanium oxide-based photocatalyst, and even achieves an H₂ O₂ yield of 0.14 mm g^-1  h^-1 upon photoexcitation by near-infrared-region light (≈800 nm).

Highly Active and Renewable Catalytic Electrodes for Two-Electron Oxygen Reduction Reaction

This study has shown that antimony-doped tin oxide (ATO) works as a robust "renewable catalyst" for the electrochemical synthesis of hydrogen peroxide (H₂O₂) from water and oxygen. Antimony doping into SnO₂ gives rise to remarkable electrocatalytic activity for two-electron oxygen reduction reaction (2e^--ORR) by water with a volcano-type relation between the activity and doping levels (x_Sb). Density functional theory simulations highlight the importance of an isolated Sb atom of ATO inducing the high activity and selectivity for 2e^--ORR due to the effects of O₂ adsorption enhancement, decrease in the activation energy, and lowering the adsorptivity of H₂O₂. Electrolysis by a normal three-electrode cell using ATO (x_Sb = 10.2 mol %) at -0.22 V (vs reversible hydrogen electrode) stably and continuously produces H₂O₂ with a turnover frequency of 6.6 s^-1. This remarkable activity can be maintained even after removing the surface layer of ATO by argon-ion sputtering.

Enhanced light harvesting and charge separation of carbon and oxygen co-doped carbon nitride as excellent photocatalyst for hydrogen evolution reaction

Solar-driven water splitting has been regarded as a promising strategy for renewable hydrogen production. Among many semiconductor photocatalysts, graphitic carbon nitride (g-C₃N₄) has received tremendous attention due to its two-dimensional structure, appropriate band gap and decent photocatalytic activity. However, it suffers severe charge recombination problems, affecting its practical performance. In this work, we demonstrated that dual heteroatoms (C and O) doped g-C₃N₄ can exhibit about 3 times higher catalytic performance for hydrogen evolution than that of the normal g-C₃N₄ with a hydrogen evolution rate reaching 2595.4 umol g^-1h^-1 and an apparent quantum efficiency at 420 nm of 16.6%. The heteroatoms (C and O) doped g-C₃N₄ photocatalyst also exhibited superior removal performance when removing Rhodamine B (RhB) . X-ray photoelectron spectroscopy (XPS), solid-state nuclear magnetic resonance (ssNMR) and X-ray absorption near-edge structure (XANES) spectroscopy reveal that the carbon and oxygen dopants replace the sp² nitrogen and bridging N atom, respectively. DFT calculations demonstrate the codoping of carbon and oxygen- induced the generation of mid-gap state, leading to the improvement of light harvesting and charge separation.

Regulating the Tip Effect on Single-Atom and Cluster Catalysts: Forming Reversible Oxygen Species with High Efficiency in Chlorine Evolution Reaction

Chlorine evolution reaction has been applied in the production since a century ago. After times of evolution, it has been widely realized by the electrocatalytic process on anode nowadays. However, the anode applied in production contains a large amount of precious metal, increasing the cost. It is thus an opportunity to apply sub-nano catalysts in this field. By regulating the tip effect (TE) of the catalyst, it was discovered that the oxidized sub-nano iridium clusters supported by titanium carbide exhibit much higher efficiency than the single-atom one, which demonstrates the significance of modifying the electronic interaction. Moreover, it exhibits a ≈20 % decrease of the electricity, ≈98 % selectivity towards chlorine evolution reaction, and high durability of over 350 h. Therefore, this cluster catalyst performs great potential in applying in the practical production and the comprehension of the tip effect on different types of catalysts is also pushed to a higher level.

Recent advances and perspectives for solar-driven water splitting using particulate photocatalysts

The conversion and storage of solar energy to chemical energy via artificial photosynthesis holds significant potential for optimizing the energy situation and mitigating the global warming effect. Photocatalytic water splitting utilizing particulate semiconductors offers great potential for the production of renewable hydrogen, while this cross-road among biology, chemistry, and physics features a topic with fascinating interdisciplinary challenges. Progress in photocatalytic water splitting has been achieved in recent years, ranging from fundamental scientific research to pioneering scalable practical applications. In this review, we focus mainly on the recent advancements in terms of the development of new light-absorption materials, insights and strategies for photogenerated charge separation, and studies towards surface catalytic reactions and mechanisms. In particular, we emphasize several efficient charge separation strategies such as surface-phase junction, spatial charge separation between facets, and polarity-induced charge separation, and also discuss their unique properties including ferroelectric and photo-Dember effects on spatial charge separation. By integrating time- and space-resolved characterization techniques, critical issues in photocatalytic water splitting including photoinduced charge generation, separation and transfer, and catalytic reactions are analyzed and reviewed. In addition, photocatalysts with state-of-art efficiencies in the laboratory stage and pioneering scalable solar water splitting systems for hydrogen production using particulate photocatalysts are presented. Finally, some perspectives and outlooks on the future development of photocatalytic water splitting using particulate photocatalysts are proposed.

Intrinsic Carbon Defects Induced Reversible Antimony Chemistry for High-Energy Aqueous Alkaline Batteries

Developing high-capacity, dendrite-free, and stable anode materials for robust aqueous alkaline batteries (AABs) is an ongoing challenge. Antimony (Sb) is predicated as an attractive anode material, but it still suffers from low capacity and poor stability caused by the obstructed kinetic behavior and uncontrollable nucleation for SbO₂ ^- . Herein, designing a new defect-modified carbon skeleton (D-CS), a highly reversible Sb anode with ultralong cycling stability is realized at practical levels of capacity and high depth of discharge (DOD). The abundant intrinsic carbon defects can effectively form positive charge centers to weaken electrostatic repulsion between SbO₂ ^- and electrode surface, facilitating the fast ion kinetics and provide generous controllable nucleation sites. In addition, the uniform electric field distribution of the D-CS induces manageable plating and stripping of the Sb metal, which effectively boosts its electrochemical reversibility and restrains adverse reactions. Accordingly, the Sb/D-CS electrode achieves a long cycle life of over 500 h with a capacity of 2 mAh cm^-2 . Even at an ultrahigh capacity of 10 mAh cm^-2 , it can still work stably up to 40 h. Furthermore, its feasibility as advanced anode in AABs is also confirmed by assembled Ni//Sb/D-CS full batteries with an ultrahigh capacity of 13.5 mAh cm^-2 and a considerable stability of 4500 cycles.

Engineering the Local Atomic Environments of Indium Single-Atom Catalysts for Efficient Electrochemical Production of Hydrogen Peroxide

The in-depth understanding of local atomic environment-property relationships of p-block metal single-atom catalysts toward the 2 e^- oxygen reduction reaction (ORR) has rarely been reported. Here, guided by first-principles calculations, we develop a heteroatom-modified In-based metal-organic framework-assisted approach to accurately synthesize an optimal catalyst, in which single In atoms are anchored by combined N,S-dual first coordination and B second coordination supported by the hollow carbon rods (In SAs/NSBC). The In SAs/NSBC catalyst exhibits a high H₂ O₂ selectivity of above 95 % in a wide range of pH. Furthermore, the In SAs/NSBC-modified natural air diffusion electrode exhibits an unprecedented production rate of 6.49 mol peroxide g_catalyst ^-1  h^-1 in 0.1 M KOH electrolyte and 6.71 mol peroxide g_catalyst ^-1  h^-1 in 0.1 M PBS electrolyte. This strategy enables the design of next-generation high-performance single-atom materials, and provides practical guidance for H₂ O₂ electrosynthesis.

Electronic Metal-Support Interaction Modulation of Single-Atom Electrocatalysts for Rechargeable Zinc-Air Batteries

High-performance oxygen electrocatalysts play a key role in the widespread application of rechargeable Zn-air batteries (ZABs). Single-atom catalysts (SACs) with maximum atom efficiency and well-defined active sites have been recognized as promising alternatives of the present noble-metal-based catalysts for oxygen reduction reaction and oxygen evolution reaction. To improve their oxygen electrocatalysis activities and reveal the structure-activity relationship, many advanced synthesis and characterization methods have been developed to study the effects of 1) coordination and electronic structure of the metal centers and 2) morphology and stability of the conductive substrates. Herein, a detailed review of the recent advances of SACs with strong electronic metal-support interaction (EMSI) for rechargeable ZABs is provided. Great emphasis was placed on the EMSI forms and design strategies. Moreover, the importance and the impact of the atomic coordinating structure and the substrates on the oxygen electrocatalytic activity and stability are highlighted. Finally, future directions and perspectives on the development of SACs are also presented.

Overall photosynthesis of H2O2 by an inorganic semiconductor

Artificial photosynthesis of H₂O₂ using earth-abundant water and oxygen is a promising approach to achieve scalable and cost-effective solar fuel production. Recent studies on this topic have made significant progress, yet are mainly focused on using  organic polymers. This set of photocatalysts is susceptible to potent oxidants (e.g. hydroxyl radical) that are inevitably formed during H₂O₂ generation. Here, we report an inorganic Mo-doped faceted BiVO₄ (Mo:BiVO₄) system that is resistant to radical oxidation and exhibits a high overall H₂O₂ photosynthesis efficiency among inorganic photocatalysts, with an apparent quantum yield of 1.2% and a solar-to-chemical conversion efficiency of 0.29% at full spectrum, as well as an apparent quantum yield of 5.8% at 420 nm. The surface-reaction kinetics and selectivity of Mo:BiVO₄ were tuned by precisely loading CoO_x and Pd on {110} and {010} facets, respectively. Time-resolved spectroscopic investigations of photocarriers suggest that depositing select cocatalysts on distinct facet tailored the interfacial energetics between {110} and {010} facets and enhanced charge separation in Mo:BiVO₄, therefore overcoming a key challenge in developing efficient inorganic photocatalysts. The promising H₂O₂ generation efficiency achieved by delicate design of catalyst spatial and electronic structures sheds light on applying robust inorganic particulate photocatalysts to artificial photosynthesis of H₂O₂.

An inorganic and robust photocatalytic system based on Mo-doped faceted BiVO4 particles exhibits a solar-to-chemical conversion efficiency of 0.29% for H₂O₂ generation, a new record among inorganic systems.

Semiconducting Polymers for Oxygen Evolution Reaction under Light Illumination

Sunlight-driven water splitting to produce hydrogen fuel has stimulated intensive scientific interest, as this technology has the potential to revolutionize fossil fuel-based energy systems in modern society. The oxygen evolution reaction (OER) determines the performance of overall water splitting owing to its sluggish kinetics with multielectron transfer processing. Polymeric photocatalysts have recently been developed for the OER, and substantial progress has been realized in this emerging research field. In this Review, the focus is on the photocatalytic technologies and materials of polymeric photocatalysts for the OER. Two practical systems, namely, particle suspension systems and film-based photoelectrochemical systems, form two main sections. The concept is reviewed in terms of thermodynamics and kinetics, and polymeric photocatalysts are discussed based on three key characteristics, namely, light absorption, charge separation and transfer, and surface oxidation reactions. A satisfactory OER performance by polymeric photocatalysts will eventually offer a platform to achieve overall water splitting and other advanced applications in a cost-effective, sustainable, and renewable manner using solar energy.

Lignin-Supported Heterogeneous Photocatalyst for the Direct Generation of H2O2 from Seawater

The development of smart and sustainable photocatalysts is in high priority for the synthesis of H₂O₂ because the global demand for H₂O₂ is sharply rising. Currently, the global market share for H₂O₂ is around 4 billion US$ and is expected to grow by about 5.2 billion US$ by 2026. Traditional synthesis of H₂O₂ via the anthraquinone method is associated with the generation of substantial chemical waste as well as the requirement of a high energy input. In this respect, the oxidative transformation of pure water is a sustainable solution to meet the global demand. In fact, several photocatalysts have been developed to achieve this chemistry. However, 97% of the water on our planet is seawater, and it contains 3.0-5.0% of salts. The presence of salts in water deactivates the existing photocatalysts, and therefore, the existing photocatalysts have rarely shown reactivity toward seawater. Considering this, a sustainable heterogeneous photocatalyst, derived from hydrolysis lignin, has been developed, showing an excellent reactivity toward generating H₂O₂ directly from seawater under air. In fact, in the presence of this catalyst, we have been able to achieve 4085 μM of H₂O₂. Expediently, the catalyst has shown longer durability and can be recycled more than five times to generate H₂O₂ from seawater. Finally, full characterizations of this smart photocatalyst and a detailed mechanism have been proposed on the basis of the experimental evidence and multiscale/level calculations.

Rational Design of Covalent Heptazine Frameworks with Spatially Separated Redox Centers for High-Efficiency Photocatalytic Hydrogen Peroxide Production

The redox reaction centers in natural organisms conducting oxygenic photosynthesis are well arranged in a physically separated manner to convert sunlight into chemical energy efficiently. Mimicking natural photosynthesis via precisely constructing oxidative and reductive reaction centers within photocatalysts is ideal for enhancing catalytic performances in artificial photosynthesis. In this study, new covalent heptazine frameworks (CHFs) with spatially separated redox centers are rationally designed for photocatalytic production of H₂ O₂ from water and oxygen without using any sacrificial agents. Both experimental and computational investigations indicate that the two-electron oxygen reduction reaction occurs on the heptazine moiety, whereas the two-electron water oxidation reaction occurs on the acetylene or diacetylene bond in the CHFs. This unique spatial separation feature is critical for enhancing charge separation and achieving efficient H₂ O₂ production. Meanwhile, the measured exciton binding energy of the diacetylene-containing polymer is merely 24 meV. Under simulated solar irradiation, the rationally designed CHFs can achieve a solar-to-chemical conversion efficiency of 0.78%, surpassing previously reported photocatalytic materials. This study establishes a molecular engineering approach to construct periodically arranged and spatially separated redox centers in single-component polymer photocatalysts, representing a hallmark to create more exciting polymer structures for photocatalysis moving forward.

State-of-the-Art Advancements of Atomically Thin Two-Dimensional Photocatalysts for Energy Conversion

Excessive use of fossil fuels leads to energy shortages and environmental pollution, threatening human health and social development. As a clean, green, and sustainable technology, generation of renewable energy from...

Single Atom Sites Catalysts based on High Specific Surface Area Supports

Catalysis is the heart of modern chemical industry. Supports with high specific surface area are crucial for the fabrication of efficient catalysts with elevated metal dispersion. Single atom sites catalysts...