Fabrication of Robust Water-Repellent Technology on Cotton Fabric via Reaction of Thiol-ene Click Chemistry

A robust superhydrophobic fabric coating was fabricated on cotton fabric under UV light, which was achieved by convenient surface modification with mercaptopropyltriethoxysilane, tetramethyltetravinylcyclotetrasiloxane, and octadecyl mercaptan. The modification of cotton fabric with 3-mercaptopropyltriethoxysilane introduces reactive mercapto groups, after which 2,4,6,8-tetramethyltetravinylcyclotetrasiloxane reacts with mercapto groups, and octadecyl mercaptan provides microscale roughness. The nonpolar carbon chains of thiol cause the cotton to have a low surface energy. As reported, the combination of microscale roughness with low surface energy has a superhydrophobic effect on cotton, which leads to a high contact angle of 161.8° and sliding angle of 8°. Infrared spectroscopy, XPS, and SEM tests were used to characterize the chemical structure and morphological changes of the surface of cotton fabric before and after click reaction. The fabric after click reaction exhibited an oil–water mixture separation ability owing to its superhydrophobicity. Thus, the finished fabric could be used in the oil–water separation field. Importantly, the superhydrophobic textile displays resistance to laundering, mechanical abrasion, strong acidic and alkaline environments, and UV irradiation. We hope that this study can broaden the real-life applications of cotton fabric.

Thiol-Ene Cationic and Radical Reactions: Cyclization, Step-Growth, and Concurrent Polymerizations for Thioacetal and Thioether Units

Thiol-ene cationic and radical reactions were conducted for 1:1 addition between a thiol and vinyl ether, and also for cyclization and step-growth polymerization between a dithiol and divinyl ether. p-Toluenesulfonic acid (PTSA) induced a cationic thiol-ene reaction to generate a thioacetal in high yield, whereas 2,2'-azobisisobutyronitrile resulted in a radical thiol-ene reaction to give a thioether, also in high yield. The cationic and radical addition reactions between a dithiol and divinyl ether with oxyethylene units yielded amorphous poly(thioacetal)s and crystalline poly(thioether)s, respectively. Under high-dilution conditions, the cationic and radical reactions resulted in 16- and 18-membered cyclic thioacetal and thioether products, respectively. Furthermore, concurrent cationic and radical step-growth polymerizations were realized using PTSA under UV irradiation to produce polymers having both thioacetal and thioether linkages in the main chain.

Poly(N-isopropylacrylamide) based thin microgel films for use in cell culture applications

Poly(N-isopropylacrylamide) (PNIPAm) is widely used to fabricate cell sheet surfaces for cell culturing, however copolymer and interpenetrated polymer networks based on PNIPAm have been rarely explored in the context of tissue engineering. Many complex and expensive techniques have been employed to produce PNIPAm-based films for cell culturing. Among them, spin coating has demonstrated to be a rapid fabrication process of thin layers with high reproducibility and uniformity. In this study, we introduce an innovative approach to produce anchored smart thin films both thermo- and electro-responsive, with the aim to integrate them in electronic devices and better control or mimic different environments for cells in vitro. Thin films were obtained by spin coating of colloidal solutions made by PNIPAm and PAAc nanogels. Anchoring the films to the substrates was obtained through heat treatment in the presence of dithiol molecules. From analyses carried out with AFM and XPS, the final samples exhibited a flat morphology and high stability to water washing. Viability tests with cells were finally carried out to demonstrate that this approach may represent a promising route to integrate those hydrogels films in electronic platforms for cell culture applications.

Thiol-Ene Based Polymers as Versatile Materials for Microfluidic Devices for Life Sciences Applications

While there is a steady growth in the number of microfluidics applications, the search for an optimal material that delivers the diverse characteristics needed for the numerous tasks is still nowhere close to being settled. Often overlooked and still underrepresented, the thiol-ene family of polymer materials has an enormous potential for applications in organs-on-a-chip, droplet productions, microanalytics, and point of care testing. In this review, the main characteristics of the thiol-ene materials are given, and advantages and drawbacks with respect to their potential in microfluidic chip fabrication are critically assessed. Select applications, which exploit the versatility of the thiol-ene polymers, are presented and discussed. It is concluded that, in particular, the rapid prototyping possibility combined with the material's resulting mechanical strength, solvent resistance, and biocompatibility, as well as the inherently easy surface functionalization, are strong factors to make thiol-ene polymers strong contenders for promising future materials for many biological, clinical, and technical lab-on-a-chip applications.

Liquid crystalline networks based on photo-initiated thiol-ene click chemistry

Photo-initiated thiol-ene click chemistry is used to develop shape memory liquid crystalline networks (LCNs). A biphenyl-based di-vinyl monomer is synthesized and cured with a di-thiol chain extender and a tetra-thiol crosslinker using UV light. The effects of photo-initiator concentration and UV light intensity on the curing behavior and liquid crystalline (LC) properties of the LCNs are investigated. The chemical composition is found to significantly influence the microstructure and the related thermomechanical properties of the LCNs. The structure-property relationship is further explored using molecular dynamics simulations, revealing that the introduction of the chain extender promotes the formation of an ordered smectic LC phase instead of agglomerated structures. The concentration of the chain extender affects the liquid crystallinity of the LCNs, resulting in distinct thermomechanical and shape memory properties. This class of LCNs exhibits fast curing rates, high conversion levels, and tailorable liquid crystallinity, making it a promising material system for advanced manufacturing, where complex and highly ordered structures can be produced with fast reaction kinetics and low energy consumption.

Photo-induced thiol-ene reactions for late-stage functionalization of unsaturated polyether macrocycles: regio and diastereoselective access to macrocyclic dithiol derivatives

Double hydrothiolation of bis enol ether macrocycles was achieved under photo-mediated conditions. The thiol-ene reactions afford a fully regioselective anti-Markovnikov post-functionalization. Thanks to the use of ethanedithiol as reagent, moderate to excellent diastereoselectivity was accomplished leading to macrocycles containing four defined stereocenters in only three steps from 1,4-dioxane, tetrahydrofuran (THF) or tetrahydropyran (THP).

Reaction Environment Effect on the Kinetics of Radical Thiol-Ene Polymerizations in the Presence of Amines and Thiolate Anions

Because of facile implementation, quantitative conversions, and an insensitivity to oxygen, water, and most organic functional groups, radical-mediated thiol-ene coupling (TEC) reactions have emerged as a valuable tool in macromolecule synthesis. It was recently demonstrated that the kinetics and conversions of thiyl radical-mediated reactions are adversely affected in the presence of basic amines by the formation of retardive thiolate anions. Herein, the performance of TEC polymerizations is evaluated under a variety of reaction environments with the intention to aid in the optimal formulation design of TEC reactions in the presence of amines. Results from both bulk and aqueous-phase network photopolymerizations established that sensitivity to amine basicity and pH is dependent on the thiol acidity, although norbornene-type alkenes exhibit a unique ability to achieve high conversions, where allyl ethers, vinyl ether, and vinyl siloxanes are highly inhibited. Additionally, the protic solvents such as alcohols and acetic acid are established as ideal solvents or additives to suppress or eliminate amine-induced retardation.

Mussel-Inspired, One-Step Thiol Functionalization of Solid Surfaces

Mussel-inspired surface chemistry, in which catechol derivatives play an important role, has garnered extensive research interest owing to material-independent surface coating capability and easy implementation to a wide range of applications. Generally, sequential reactions comprising catechol oxidation, intramolecular reaction of oxidized catechols with nucleophiles, and intermolecular assembly result in polymers that can adhere to many diverse surfaces. Although amines and thiols have similar reactivity toward oxidized catechols, most studies have been conducted with catechol and amine groups as essentials. Surface coating with catechol-thiol has not been investigated. In this study, we show that 4-(2-mercapto-ethyl)-benzene-1,2-diol (catechol-thiol) can serve as a surface coating agent in the presence of a strong oxidant. A wide range of materials are coated with catechol-thiol, and an additional grafting of the functional molecules onto the surface is also performed through well-established thiol chemistry, Michael addition, and thiol-ene reaction.

Photoinduced Proton-Transfer Polymerization: A Practical Synthetic Tool for Soft Lithography Applications

Proton-transfer photopolymerization through the thiol-epoxy "click" reaction is shown to be a versatile new method for the fabrication of micro- and nanosized polymeric patterns. In this approach, complexation of a guanidine base, diazabicycloundecene (DBU), with benzoylphenylpropionic acid (ketoprofen) generates a photolabile salt. Under illumination at a wavelength of 365 nm, the salt undergoes a photodecarboxylation reaction to release DBU as a base. The base-catalyzed ring opening reaction then creates cross-linked poly(β-hydroxyl thio-ether) patterns. The surface chemistry of these patterns can be altered through alkylation of the thio-ether linkages. For example, a reaction with bromoacetic acid produces a hitherto unknown sulfonium/carboxylate-based zwitterionic motif that endows antibiofouling capacity to the micropatterns.

Dendrimers: Amazing Platforms for Bioactive Molecule Delivery Systems

Today, dendrimers are the main nanoparticle applied to drug delivery systems. The physicochemical characteristics of dendrimers and their versatility structural modification make them attractive to applied as a platform to bioactive molecules transport. Nanoformulations based on dendrimers enhance low solubility drugs, arrival to the target tissue, drugs bioavailability, and controlled release. This review describes the latter approaches on the transport of bioactive molecules based on dendrimers. The review focus is on the last therapeutic strategies addressed by dendrimers conjugated with bioactive molecules. A brief review of the latest studies in therapies against cancer and cardiovascular diseases, as well as future projections in the area, are addressed.

PLGA-PEG-ANG-2 Nanoparticles for Blood-Brain Barrier Crossing: Proof-of-Concept Study

The treatment of diseases that affect the central nervous system (CNS) represents a great research challenge due to the restriction imposed by the blood-brain barrier (BBB) to allow the passage of drugs into the brain. However, the use of modified nanomedicines engineered with different ligands that can be recognized by receptors expressed in the BBB offers a favorable alternative for this purpose. In this work, a BBB-penetrating peptide, angiopep-2 (Ang-2), was conjugated to poly(lactic-co-glycolic acid) (PLGA)-based nanoparticles through pre- and post-formulation strategies. Then, their ability to cross the BBB was qualitatively assessed on an animal model. Proof-of-concept studies with fluorescent and confocal microscopy studies highlighted that the brain-targeted PLGA nanoparticles were able to cross the BBB and accumulated in neuronal cells, thus showing a promising brain drug delivery system.

Sunlight-Mediated Thiol-Ene/Yne Click Reaction: Synthesis and DNA Transfection Efficiency of New Cationic Lipids

The design of green synthetic reaction conditions is very challenging, especially for biomaterials, but worthwhile if the compounds can be easily synthesized in the aqueous medium. Herein, we report the development of sunlight-mediated thiol-ene/yne click reaction in the presence of a catalytic amount of tert-butyl hydroperoxide (TBHP) in an aqueous medium. The optimized reaction conditions were successfully applied to synthesize a series of small molecules and lipids in a single step in the aqueous medium. The synthetic cationic lipid/co-lipid formed positively charged stable nanosized liposomes that effectually bind with the genetic materials. The in vitro DNA transfection and cellular uptake assays showed that the synthesized cationic lipids have comparable efficiency to commercially available Lipofectamine 2000. This mild synthetic strategy can also be used for smart design of novel or improvement of prevailing lipid-based nonviral gene delivery systems. Such chemical transformations in the aqueous medium are more environment-friendly than other reported thiol-ene/yne click reactions performed in an organic solvent medium.

Bio-Inspired Amphiphilic Block-Copolymers Based on Synthetic Glycopolymer and Poly(Amino Acid) as Potential Drug Delivery Systems

In this work, a method to prepare hybrid amphiphilic block copolymers consisting of biocompatible synthetic glycopolymer with non-degradable backbone and biodegradable poly(amino acid) (PAA) was developed. The glycopolymer, poly(2-deoxy-2-methacrylamido-D-glucose) (PMAG), was synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. Two methods for modifying the terminal dithiobenzoate-group of PMAG was investigated to obtain the macroinitiator bearing a primary aliphatic amino group, which is required for ring-opening polymerization of N-carboxyanhydrides of hydrophobic α-amino acids. The synthesized amphiphilic block copolymers were carefully analyzed using a set of different physico-chemical methods to establish their composition and molecular weight. The developed amphiphilic copolymers tended to self-assemble in nanoparticles of different morphology that depended on the nature of the hydrophobic amino acid present in the copolymer. The hydrodynamic diameter, morphology, and cytotoxicity of polymer particles based on PMAG-b-PAA were evaluated using dynamic light scattering (DLS) and transmission electron microscopy (TEM), as well as CellTiter-Blue (CTB) assay, respectively. The redox-responsive properties of nanoparticles were evaluated in the presence of glutathione taken at different concentrations. Moreover, the encapsulation of paclitaxel into PMAG-b-PAA particles and their cytotoxicity on human lung carcinoma cells (A549) and human breast adenocarcinoma cells (MCF-7) were studied.

Amplified photo-responses in sequentially polymerized azobenzene-containing polymer networks: the role of isomer interconnection

Sequentially polymerized azobenzene-containing polymer networks with isomer-interconnected features can greatly enhance photo-actuation responses.

Therapeutic potential of polypeptide-based conjugates: Rational design and analytical tools that can boost clinical translation

The clinical success of polypeptides as polymeric drugs, covered by the umbrella term "polymer therapeutics," combined with related scientific and technological breakthroughs, explain their exponential growth in the development of polypeptide-drug conjugates as therapeutic agents. A deeper understanding of the biology at relevant pathological sites and the critical biological barriers faced, combined with advances regarding controlled polymerization techniques, material bioresponsiveness, analytical methods, and scale up-manufacture processes, have fostered the development of these nature-mimicking entities. Now, engineered polypeptides have the potential to combat current challenges in the advanced drug delivery field. In this review, we will discuss examples of polypeptide-drug conjugates as single or combination therapies in both preclinical and clinical studies as therapeutics and molecular imaging tools. Importantly, we will critically discuss relevant examples to highlight those parameters relevant to their rational design, such as linking chemistry, the analytical strategies employed, and their physicochemical and biological characterization, that will foster their rapid clinical translation.

Improved synthesis and application of conjugation-amenable polyols from d-mannose

A series of polyhydroxyl sulfides and triazoles was prepared by reacting allyl and propargyl d-mannose derivatives with selected thiols and azides in thiol–ene and Huisgen click reactions. Conformational analysis by NMR spectroscopy proved that the intrinsic rigidity and linear conformation of the mannose derived polyol backbone is retained in the final click products in solution. Single crystal X-ray structure determination of one of the compounds prepared further verified that the linear conformation of the polyol segment is also retained in the solid state. In addition, an improved method for direct Barbier-type propargylation of unprotected d-mannose is reported. The new reaction protocol, involving tin-mediated propargylation in an acetonitrile-water mixture, provides access to multigram quantities of the desired, valuable alkyne polyol without relying on protecting group manipulations or chromatographic purification.

An improved method for the propargylation of d-mannose and application of the rod-like polyol and its allylated analogue in click reactions is described.

Facile preparation of polycarbonates from bio-based eugenol and 2-methoxy-4-vinylphenol

Polymerization of α,ω-diene functionalized carbonate monomers prepared from bio-based eugenol and 2-methoxy-4-vinylphenol through thiol–ene click and ADMET polymerizations produced polycarbonates with moderate molecular weight satisfactory thermal properties.

Thiol-reactive thiosulfonate group containing copolymers: facile entry to disulfide-mediated polymer conjugation and redox-responsive functionalizable networks

Herein, we report a synthetic approach to thiol-reactive polymers containing methanethiosulfonate groups as side chains, and demonstrate their application in post-polymerization functionalization through reversible disulfide linkages.

AIE-active polysulfates via a sulfur(vi) fluoride exchange (SuFEx) click reaction and investigation of their two-photon fluorescence and cyanide detection in water and in living cells

Three polysulfates P1, P2 and P3 containing two representative AIE-active groups, tetraphenyl ethylene and naphthylamide, were successfully synthesized based on a sulfur(vi) fluoride exchange (SuFEx) click reaction.

Synthesis and photoinitiated thiol–ene reactions of exo-mannals – a new route to C-β-d-mannosyl derivatives

Syntheses of acyl protected exo-mannal derivatives were developed starting from O-peracylated mannopyranoses via the corresponding anhydro-aldose tosylhydrazones under modified Bamford–Stevens conditions. The synthesis of analogous O-peralkylated (benzylated and isopropylenated) derivatives was carried out from pyranoid and furanoid mannonolactones using methylene transfer reagents. Photoinitiated thiol–ene additions of these exo-mannals resulted in the corresponding C-(mannopyranosyl/mannofuranosyl)methyl sulfides in medium to good yields with exclusive regio- and β(d) stereoselectivities.

A synthetic procedure was elaborated for O-peracylated exo-mannals. Thiol-ene additions to pyranoid and furanoid exo-mannals gave mannosylmethyl sulfide type adducts with exclusive regio- and β(d)-stereoselectivities including disaccharide mimetics.

Time-dependent covalent network formation in extrudable hydrogels

Shear-thinning hydrogels that utilize thiol-Michael chain-extension and free radical polymerization have a tunable stretchability.

Disulfides as mercapto-precursors in nucleophilic ring opening reaction of polymeric epoxides: establishing equimolar stoichiometric conditions in a thiol–epoxy ‘click’ reaction

This work establishes equimolar stoichiometric conditions in a thiol–epoxy ‘click’ reaction.

Multiarm star polymers based on thiol–ene photoclick cyclodextrin cores

Highly efficient synthesis of multifunctional initiators based on cyclodextrin (CD) cores was achieved by a thiol–ene photoclick strategy. They were successfully employed in a “core-first” approach to prepare multiarm star polymers via ATRP.

Tuning the Multifunctional Surface Chemistry of Reduced Graphene Oxide via Combined Elemental Doping and Chemical Modifications

The synthesis of graphene materials with multiple surface chemistries and functionalities is critical for further improving their properties and broadening their emerging applications. We present a simple chemical approach to obtain bulk quantities of multifunctionalized reduced graphene oxide (rGO) that combines chemical doping and functionalization using the thiol-ene click reaction. Controllable modulation of chemical multifunctionality was achieved by simultaneous nitrogen doping and gradual chemical reduction of graphene oxide (GO) using ammonia and hydrazine, followed by covalent attachment of amino-terminated thiol molecules using the thiol-ene click reaction. A series of N-doped rGO (N-rGO) precursors with different levels of oxygen groups were synthesized by adjusting the amount of reducing agent (hydrazine), followed by subsequent covalent attachment of cysteamine via the thermal thiol-ene click reaction to yield different ratios of mixed functional groups including N (pyrrolic N, graphitic N, and aminic N), S (thioether S, thiophene S, and S oxides), and O (hydroxyl O, carbonyl O, and carboxyl O) on the reduced GO surface. Detailed XPS analysis confirmed the disappearance of unstable pyridinic N in cys-N-rGO and the reduction degree threshold of N-rGO for effective cysteamine modification to take place. Our study establishes a strong correlation between different reduction degrees of N-rGO with several existing oxygen functional groups and addition of new tunable functionalities including covalently attached nitrogen (amino) and sulfur (C-S-C, C=S, and S-O). This simple and versatile approach provides a valuable contribution for practical designing and synthesis of a broad range of functionalized graphene materials with tailorable functionalities, doping levels, and interfacial properties for potential applications such as polymer composites, supercapacitors, electrocatalysis, adsorption, and sensors.

Multivalent binding of concanavalin A on variable-density mannoside microarrays

Interactions between cell surface glycans and glycan binding proteins (GBPs) have a central role in the immune response, pathogen-host recognition, cell-cell communication, and a myriad other biological processes. Because of the weak association between GBPs and glycans in solution, multivalent and cooperative interactions in the dense glycocalyx have an outsized role in directing binding affinity and selectivity. However, a major challenge in glycobiology is that few experimental approaches exist for examining and understanding quantitatively how glycan density affects avidity with GBPs, and there is a need for new tools that can fabricate glycan arrays with the ability to vary their density controllably and systematically in each feature. Here, we use thiol-ene reactions to fabricate glycan arrays using a recently developed photochemical printer that leverages a digital micromirror device and microfluidics to create multiplexed patterns of immobilized mannosides, where the density of mannosides in each feature was varied by dilution with an inert spacer allyl alcohol. The association between these immobilized glycans and FITC-labeled concanavalin A (ConA) - a tetrameric GBP that binds to mannosides multivalently - was measured by fluorescence microscopy. We observed that the fluorescence decreased nonlinearly with increasing spacer concentration in the features, and we present a model that relates the average mannoside-mannoside spacing to the abrupt drop-off in ConA binding. Applying these recent advances in microscale photolithography to the challenge of mimicking the architecture of the glycocalyx could lead to a rapid understanding of how information is trafficked on the cell surface.

The CuAAC: Principles, Homogeneous and Heterogeneous Catalysts, and Novel Developments and Applications

The copper-catalyzed azide/alkyne cycloaddition reaction (CuAAC) has emerged as the most useful "click" chemistry. Polymer science has profited enormously from CuAAC by its simplicity, ease, scope, applicability and efficiency. Basic principles of the CuAAC are reviewed with a focus on homogeneous and heterogeneous catalysts, ligands, anchimeric assistance, and basic chemical principles. Recent developments of ligand design and acceleration are discussed.

Synthesis of Rapidly Surface Eroding Polyorthoesters and Polyacetals Using Thiol-ene Click Chemistry

Polyorthoesters are generally considered to be highly biocompatible, surface-eroding materials. However, sensitive intermediates and poor mechanical performance have largely prevented their widespread application to date. Herein, a simple and versatile method to synthesize orthoester- and acetal-based polymers is presented. Using 2-methylene-1,3-dioxe-5-pene as a stable bifunctional monomer, sequential highly selective "click" reactions led initially to the formation of orthoesters (OE) in a Markovnikov alcohol addition or acetals via anti-Markovnikov thiol-ene addition. Subsequent photoinitiated thiol addition onto the remaining endocyclic and backbone alkene functionalities lead to thioether formation to produce a class of poly(orthoester-thioether)s or poly(acetal-thioether)s via a step-growth polymerization. While all obtained polymers were found to possess a weight-average molecular weight of above 10 kg·mol^-1, the application of an OE monomer with additional double bond functionality led to a cross-linked polymer network which displayed surface-erosion behavior.

3D Bioprinting of the Sustained Drug Release Wound Dressing with Double-Crosslinked Hyaluronic-Acid-Based Hydrogels

Hyaluronic acid (HA)-based hydrogels are widely used in biomedical applications due to their excellent biocompatibility. HA can be Ultraviolet (UV)-crosslinked by modification with methacrylic anhydride (HA-MA) and crosslinked by modification with 3,3'-dithiobis(propionylhydrazide) (DTP) (HA-SH) via click reaction. In the study presented in this paper, a 3D-bioprinted, double-crosslinked, hyaluronic-acid-based hydrogel for wound dressing was proposed. The hydrogel was produced by mixing HA-MA and HA-SH at different weight ratios. The rheological test showed that the storage modulus (G') of the HA-SH/HA-MA hydrogel increased with the increase in the HA-MA content. The hydrogel had a high swelling ratio and a high controlled degradation rate. The in vitro degradation test showed that the hydrogel at the HA-SH/HA-MA ratio of 9:1 (S9M1) degraded by 89.91% ± 2.26% at 11 days. The rheological performance, drug release profile and the cytocompatibility of HA-SH/HA-MA hydrogels with loaded Nafcillin, which is an antibacterial drug, were evaluated. The wound dressing function of this hydrogel was evaluated by Live/Dead staining and CCK-8 assays. The foregoing results imply that the proposed HA-SH/HA-MA hydrogel has promise in wound repair applications.

Co-immobilization of CD133 antibodies, vascular endothelial growth factors, and REDV peptide promotes capture, proliferation, and differentiation of endothelial progenitor cells

Capture of endothelial progenitor cells (EPCs) in situ has been considered as a promising strategy for the rapid endothelialization and long-term patency of artificial blood vessels and implant devices. In this study, a CD133⁺ EPC capture surface was fabricated by grafting CD133 antibody (a more specific EPC surface marker than CD34) and Arg-Glu-Asp-Val (REDV) peptideon the methacrylate-grafted hyaluronic acid (MA-HA) and heparin-hybridized (MA-HA&Heparin) resisting layer. Vascular endothelial growth factor (VEGF) was further conjugated to the immobilized heparin. This engineered surface showed good hemocompatibility and significantly higher ability of capturing CD133⁺ EPCs from human peripheral blood mononuclear cells (PBMCs) and obviously upregulated the expression of endothelial cell (EC) marker genes of EPCs such as VEGF receptor 2 (VEGFR2), CD31, VE-cadherin, and von Willebrand factor (vWF), facilitating the differentiation of EPCs into ECs. The dramatically enhanced EPC proliferation on this surface was dependent on the integrin-VEGFR synergistic signaling, as ERK1/2 phosphorylation was only significantly enhanced on the REDV and VEGF co-immobilized surface. This study highlights a new surface coating strategy for blood-contact materials based on the specific EPC capturing and rapid endothelialization. STATEMENT OF SIGNIFICANCE: Capture of endothelial progenitor cells (EPCs) in situ is a promising strategy for the rapid endothelialization and long-term patency of artificial blood vessels and scaffolds. More specific capture of EPCs by targeting CD133 rather than CD34 can better reduce the risk of inflammation and restenosis. On the other hand, an appropriate microenvironment for EPC proliferation is equally important for endothelialization, which is rarely considered by the existing EPC capture strategies. In this study, the capture ratio of EPCs was significantly increased by simultaneously grafting CD133 antibody and VEGF on a MA-HA and heparin-hybridized antifouling layer. Further, proliferation of EPCs after capture was significantly promoted by grafting VEGF and REDV peptide through the integrin-VEGFR synergistic signaling. This study highlights a new strategy for the surface coating of blood-contact materials based on specific EPC capture and rapid endothelialization.

Synthesis of a Heterotelechelic Helical Poly(methacrylamide) and its Incorporation into a Supramolecular Triblock Copolymer

We report the first heterotelechelic helical poly(methacrylamide) (PMAc) bearing orthogonal supramolecular binding sites on its chain-ends synthesized through a combination of reversible addition-fragmentation chain-transfer (RAFT) polymerization and thiol-bromo "click" chemistry. The heterotelechelic PMAc was assembled with two monotelechelic polymers featuring different secondary structures, namely a coil-like poly(styrene) and a helical poly(isocyanide), resulting in the formation of a coil-helix-helix supramolecular triblock copolymer through orthogonal metal coordination and hydrogen bonding interactions. Triblock assembly was confirmed through 1H NMR spectroscopy, isothermal titration calorimetry (ITC) and viscometry. The individual polymer blocks retained their secondary structures in the final triblock copolymer, as evidenced by circular dichroism (CD) spectroscopy. Our synthetic strategy expands the toolbox of triblock copolymers featuring structural motifs similar to the ones found in proteins and provides the potential for the development of other complex multifunctional polymeric ensembles.

Controlling Polymer Composition in Organocatalyzed Photoredox Radical Ring-Opening Polymerization of Vinylcyclopropanes

Although radical polymerizations are among the most prevalent methodologies for the synthesis of polymers with diverse compositions and properties, the intrinsic reactivity and selectivity of radical addition challenge the ability to impart control over the polymerization propagation and produce polymers with defined microstructure. Vinylcyclopropanes (VCPs) can be polymerized through radical ring-opening polymerization to produce polymers possessing linear (l) or cyclic (c) repeat units, providing the opportunity to control polymer structure and modify the polymer properties. Herein, we report the first organocatalyzed photoredox radical ring-opening polymerization of a variety of functionalized VCP monomers, where high monomer conversions and spatial and temporal control were achieved to produce poly(VCPs) with predictable molecular weight and low dispersity. Through manipulating polymerization concentration and temperature, tunable l or c content was realized, allowing further investigation of thermal and viscoelastic materials properties associated with these two distinct compositions. Unexpectedly, the photoredox catalysis enables a postpolymerization modification that converts l content into the c content. Combined experimental and computational studies suggested an intramolecular radical cyclization pathway, where cyclopentane and cyclohexane repeat units are likely formed.