Multicomponent ionic crystals of diltiazem with dicarboxylic acids toward understanding the structural aspects driving the drug-release

Diltiazem (DIL) is a calcium channel blocker antihypertensive drug commonly used in the treatment of cardiovascular disorders. Due to the high solubility and prompt dissolution of the commercial form hydrochloride (DIL-HCl) that is closely related to short elimination drug half-life, this API is known for exhibiting an unfitted pharmacokinetic profile. In an attempt to understand how engineered multicomponent ionic crystals of DIL with dicarboxylic acids can minimize these undesirable biopharmaceutical attributes, herein, we have focused on the development of less soluble and slower dissolving salt/cocrystal forms. By the traditional solvent evaporation method, two hydrated salts of DIL with succinic and oxalic acids (DIL-SUC-H₂O and DIL-OXA-H₂O), and one salt-cocrystal with fumaric acid (DIL-FUM-H₂FUM) were successfully prepared. An in-depth crystallographic description of these new solid forms was conducted through single and powder X-ray diffraction (SCXRD, PXRD), Hirshfeld surface (HS) analysis, energy framework (EF) calculations, Fourier Transform Infrared (FT-IR) spectroscopy, and thermal analysis (TG, DSC, and HSM). Structurally, the inclusion of dicarboxylic acids in the crystal structures provided the formation of 2D-sheet assemblies, where ionic pairs (DIL⁺/anion^-) are associated with each other via H-bonding. Consequently, a substantial lowering in both solubility (16.5-fold) and intrinsic dissolution rate (13.7-fold) of the API has been achieved compared to that of the hydrochloride salt. These findings demonstrate the enormous potential of these solid forms in preparing of novel modified-release pharmaceutical formulations of DIL.

New Sodium Mefenamate - Nicotinamide Multicomponent Crystal Development to Modulate Solubility and Dissolution: Preparation, Structural, and Performance Study

A cocrystal of mefenamic acid (MA) - nicotinamide (NA) has been reported to increase the solubility of MA, but it still does not exceed the solubility of sodium mefenamate (SM). Accordingly, this research dealt with a new salt cocrystal arrangement of SM - NA. Cocrystal screening was performed, followed by powder and single-crystal preparation. Solvent drop grinding and slow evaporation at cold and ambient temperatures were employed to produce the multicomponent crystal. Two new salt cocrystals were found as hemihydrates and monohydrates, named SMN-HH and SMN-MH, respectively. SMN-MH single crystals were successfully isolated and structurally analyzed using a single crystal X-ray diffractometer. Pharmaceutical properties were investigated, including hydrate stability, solubility, and intrinsic dissolution. The experiments showed that the hemihydrate was stable under ambient humidity and temperature, and that the monohydrate rapidly changed to hemihydrate. Both hydrates improved the solubility and intrinsic dissolution of SM, but SMN-HH was superior. The data showed that SMN salt cocrystals combine the advantages of salt and cocrystals and show potential for dosage form development.

Synthetic Approaches to Halogen Bonded Ternary Cocrystals

Higher cocrystal synthesis depends acutely on a knowledge of supramolecular synthons. We report three synthetic approaches towards ternary halogen bonded cocrystals that illustrate specificity and generality. Electrophilicity/nucleophilicity differences are needed among alternative sites of halogen bond formation. The two halogen bonds A⋅⋅⋅B and B⋅⋅⋅C in a halogen bonded ternary cocrystal ABC need to be of different strength. Interaction mimicry of hydrogen bonds by halogen bonds is a viable approach towards ternaries as illustrated with the pyrene structure. Finally, the crystal engineer should well be able to anticipate halogen bonds that are stronger than hydrogen bonds.

Amino Acids as the Potential Co-Former for Co-Crystal Development: A Review

Co-crystals are one of the most popular ways to modify the physicochemical properties of active pharmaceutical ingredients (API) without changing pharmacological activity through non-covalent interactions with one or more co-formers. A "green method" has recently prompted many researchers to develop solvent-free techniques or minimize solvents for arranging the eco-friendlier process of co-crystallization. Researchers have also been looking for less-risk co-formers that produce the desired API's physicochemical properties. This review purposed to collect the report studies of amino acids as the safe co-former and explored their advantages. Structurally, amino acids are promising co-former candidates as they have functional groups that can form hydrogen bonds and increase stability through zwitterionic moieties, which support strong interactions. The co-crystals and deep eutectic solvent yielded from this natural compound have been proven to improve pharmaceutical performance. For example, l-glutamine could reduce the side effects of mesalamine through an acid-base stabilizing effect in the gastrointestinal fluid. In addition, some amino acids, especially l-proline, enhances API's solubility and absorption in its natural deep eutectic solvent and co-crystals systems. Moreover, some ionic co-crystals of amino acids have also been designed to increase chiral resolution. Therefore, amino acids are safe potential co-formers, which are suitable for improving the physicochemical properties of API and prospective to be developed further in the dosage formula and solid-state syntheses.

Challenges and opportunities of pharmaceutical cocrystals: a focused review on non-steroidal anti-inflammatory drugs

The focus of the review is to discuss the relevant and essential aspects of pharmaceutical cocrystals in both academia and industry with an emphasis on non-steroidal anti-inflammatory drugs (NSAIDs). Although cocrystals have been prepared for a plethora of drugs, NSAID cocrystals are focused due to their humongous application in different fields of medication such as antipyretic, anti-inflammatory, analgesic, antiplatelet, antitumor, and anti-carcinogenic drugs. The highlights of the review are (a) background of cocrystals and other solid forms of an active pharmaceutical ingredient (API) based on the principles of crystal engineering, (b) why cocrystals are an excellent opportunity in the pharma industry, (c) common methods of preparation of cocrystals from the lab scale to bulk quantity, (d) some latest case studies of NSAIDs which have shown better physicochemical properties for example; mechanical properties (tabletability), hydration, solubility, bioavailability, and permeability, and (e) latest guidelines of the US FDA and EMA opening new opportunities and challenges.

Mechanochemistry: A Green Approach in the Preparation of Pharmaceutical Cocrystals

Mechanochemistry is considered an alternative attractive greener approach to prepare diverse molecular compounds and has become an important synthetic tool in different fields (e.g., physics, chemistry, and material science) since is considered an ecofriendly procedure that can be carried out under solvent free conditions or in the presence of minimal quantities of solvent (catalytic amounts). Being able to substitute, in many cases, classical solution reactions often requiring significant amounts of solvents. These sustainable methods have had an enormous impact on a great variety of chemistry fields, including catalysis, organic synthesis, metal complexes formation, preparation of multicomponent pharmaceutical solid forms, etc. In this sense, we are interested in highlighting the advantages of mechanochemical methods on the obtaining of pharmaceutical cocrystals. Hence, in this review, we describe and discuss the relevance of mechanochemical procedures in the formation of multicomponent solid forms focusing on pharmaceutical cocrystals. Additionally, at the end of this paper, we collect a chronological survey of the most representative scientific papers reporting the mechanochemical synthesis of cocrystals.

Nucleation of the Theophylline:Salicylic Acid 1:1 Cocrystal

The nucleation behavior of the theophylline-salicylic acid 1:1 (THP:SA) cocrystal in chloroform has been investigated and compared with the corresponding behavior of the pure compounds. Induction times have been determined at different supersaturations at 10 °C under each condition in approximately 40-80 repetition experiments in 20 mL vials. Nucleation times, extracted from the median induction times by accounting for a nucleus growth time, have been used to determine the interfacial energy and the pre-exponential factor within the classical nucleation theory. Results show that the cocrystal at equal driving force has a longer nucleation time, or to reach equal nucleation time, the cocrystal requires a higher driving force. Pure theophylline is easier to nucleate than pure salicylic acid, despite the latter having a smaller molecular size, higher solubility, and is expected to form dimers already in the solution. The cocrystal is found to have an interfacial energy in between the respective values for the pure compounds. However, the higher molecular volume of the cocrystal, taken as the volume of the 1:1 theophylline-salicylic acid assembly, leads to the highest nucleation work, which, together with a low pre-exponential factor, explains why the cocrystal is the most difficult to nucleate. The experimentally extracted pre-exponential factor of the cocrystal is very similar to that of THP, and similar trends are observed from theoretical expressions of volume-diffusion- and surface-integration-controlled nucleation, respectively.

Changes in the proportions of an active pharmaceutical through cocrystals

In this study, the modulation of amounts sulfathiazolium cations in different 2,6-pyridinedicarboxylates is demonstrated. An uncommon monoionic sulfathiazolium zinc 2,6-pyridinedicarboxylate (1:1 electrolyte) complex was characterized. Conventional sulfathiazolium zinc-bis-2,6-pyridinedicarboxylate dianionic complexes (2:1 electrolyte) were formed when hydroxyaromatic compounds such as 1,3-dihydroxybenzene or 3-nitrophenol were used as guest components. Thus, with the aid of the hydroxyaromatic molecules the zinc-bis-2,6-pyridinedicarboxylate complexes were stabilized with the relatively large sized sulfathiazolium cations. It was a consequence of domain expansion by the phenolic compounds. Sandwiched aromatic guests between the 2,6-pyridinedicarboxylates provided appropriate packing to accommodate the two large cations in the self-assemblies, which helped to modulate the amounts of sulfathiazole in different formulations. Antibacterial activities with E. coli DH5α have shown that the salt and the complexes have lower g/ml antibacterial activity than the parent drug.

In-line Raman spectroscopy and chemometrics for monitoring cocrystallisation using hot melt extrusion

The application of in-line Raman spectroscopy to monitor the formation of a 1:1 cocrystal of ibuprofen (IBU) as a BCS class II drug and nicotinamide as coformer using hot-melt extrusion (HME) was investigated. The process was monitored over different experimental conditions inserting the Raman probe before the extruder die. Partial least square (PLS) was applied as a robust chemometric technique to build predictive models at different levels of chemometric by dividing the experimental data set into calibration and validation subsets. Powder X-Ray diffraction (PXRD) spectra of a set of standard samples were used as calibration to calculate the cocrystal yield from HME experiments regressed by the PLS models. Examination of the full spectra with standard normal variate (SNV) scatter correction with first derivative provided the best fitting goodness and reliability for prediction. Differential scanning calorimetry (DSC) was used as a complementary technique to confirm the composition of the extrudates. Tracking the cocrystal formation throughout the barrel by inserting two Raman probes simultaneously in two different heating zones revealed highly valuable information for understanding the mechanism of cocrystal formation during the HME process.

Rosuvastatin cocrystals: an attempt to modulate physicochemical parameters

Background

The meager physicochemical properties like low solubility and low dissolution rate of rosuvastatin calcium remain as an obstruction for formulation development. In the present work, we explore the evolution of rosuvastatin cocrystal, which may offer the synergetic physico-chemical properties of the drug. Cocrystal crafting depends on two possible intermolecular interactions; heteromeric and the homomeric selection of compounds with complementary functional groups are contemplated as a possible cause of supramolecular synthons in cocrystal formation. Specifically, cocrystals of rosuvastatin with l-asparagine and l-glutamine with molar ratio (1:1) were fabricated by using slow solvent evaporation and slow evaporation techniques. Novel cocrystals of rosuvastatin-asparagine (RSC-C) and rosuvastatin-glutamine (RSC-G) cocrystals obtained by slow solvent evaporation were utilized for preliminary investigation and further scale-up was done by using the solvent evaporation technique.

Results

The novel cocrystals showed a new characteristic of powder X-ray diffraction, thermograms of differential scanning calorimetry, 1H liquid FT-NMR spectra, and scanning electron microscopy. These results signify the establishment of intermolecular interaction within the cocrystals. In both the novel cocrystals, rosuvastatin was determined to be engaged in the hydrogen bond interaction with the complementary functional groups of l-asparagine and l-glutamine. Compared with the pure rosuvastatin, RSC-C and RSC-G cocrystal showed 2.17-fold and 1.60-fold improved solubility respectively. The dissolution test showed that the RSC-C and RSC-G cocrystal exhibited 1.97-fold and 1.94-fold higher dissolution rate than the pure rosuvastatin in pH6.8 phosphate buffer respectively.

Conclusion

Modulation in the chemical environment, improvement in the solubility, and dissolution rate demonstrated the benefit of co-crystallization to improve the physicochemical properties of the drug.

Graphical abstract

Two Faces of Water in the Formation and Stabilization of Multicomponent Crystals of Zwitterionic Drug-Like Compounds

Two new hydrated multicomponent crystals of zwitterionic 2-aminonicotinic acid with maleic and fumaric acids have been obtained and thoroughly characterized by a variety of experimental (X-ray analysis and terahertz Raman spectroscopy) and theoretical periodic density functional theory calculations, followed by Bader analysis of the crystalline electron density) techniques. It has been found that the Raman-active band in the region of 300 cm−1 is due to the vibrations of the intramolecular O-H...O bond in the maleate anion. The energy/enthalpy of the intermolecular hydrogen bonds was estimated by several empirical approaches. An analysis of the interaction networks reflects the structure-directing role of the water molecule in the examined multicomponent crystals. A general scheme has been proposed to explain the proton transfer between the components during the formation of multicomponent crystals in water. Water molecules were found to play the key role in this process, forming a “water wire” between the COOH group of the dicarboxylic acid and the COO– group of the zwitterion and the rendering crystal lattice of the considered multicomponent crystals.

Novel cocrystals of itraconazole: Insights from phase diagrams, formation thermodynamics and solubility

In this work, the cocrystallization approach was applied to itraconazole (ITR), a very slightly soluble triazole antifungal drug, which led to the formation of two new solid forms of ITR with 4-aminobenzoic acid (4AmBA) and 4-hydroxybenzamide (4OHBZA). A thermodynamic analysis of the solid-liquid binary phase diagrams for the (ITR + 4AmBA) and (ITR + 4OHBZA) systems provided conclusive evidence of the cocrystal stoichiometry: 1:1 for the cocrystal with 4-aminobenzoic acid, and 1:2 for the cocrystal with 4-hydroxybenzamide. Powder X-Ray diffraction analysis confirmed the formation of two different polymorphic forms of the [ITR + 4OHBZA] (1:2) cocrystal obtained either through solution or melt crystallization. Cocrystal formation and polymorphic transition processes were investigated in detail by the DSC and HSM methods. The thermodynamic functions of cocrystal formation were estimated from the solubility of the cocrystals and the corresponding solubility of the pure compounds at different temperatures. The combination of ITR and 4OHBZA was found to be more favorable than the reaction between ITR and 4AmBA in terms of both Gibbs energy and enthalpy. The pH-solubility behavior of the cocrystals was investigated at different pH values using eutectic concentrations of the components and the cocrystal solubility advantage was estimated. It was found that the cocrystallization of itraconazole with 4OHBZA and 4AmBA can potentially increase the drug solubility at pH1.2 and 37 °C by 225 and 64 times, respectively. The cocrystal dissolution behavior in biorelevant media was analyzed in terms of C_max, σ_max parameters (the maximum ITR concentration and supersaturation), and AUC (the concentration area under the curve during the dissolution - supersaturation - precipitation process). The cocrystals had similar σ_max values during the dissolution and sustained supersaturation for up to 6 h, which gave them an advantage in the AUC values (13-37 times higher) over the drug. The differences in the dissolution profiles of the cocrystals were rationalized in terms of their dissolution rate values.

Investigation of the solid-liquid ternary phase diagrams of 2HNIW·HMX cocrystal

The influence of temperature and solvent on the solid–liquid ternary phase diagrams of the 2HNIW·HMX cocrystal has been investigated. Ternary phase diagrams were constructed for the 2HNIW·HMX cocrystal in acetonitrile and ethyl acetate at 15 °C and 25 °C. HMX and HNIW showed inconsistent dissolution behavior and congruent dissolution behavior in acetonitrile and ethyl acetate, respectively. In the HMX–HNIW–acetonitrile system, the 2HNIW·HMX cocrystal has a narrow thermodynamically stable region at both temperatures. The cocrystal exhibits a wider thermodynamically stable region in the HMX–HNIW–ethyl acetate system. The results show that the choice of solvent has a crucial influence on the dissolution behavior of the cocrystal and the size and position of each region in the phase diagram, while the temperature has no apparent effect on the overall appearance of the phase diagram. By properly selecting the ratios, the 2HNIW·HMX cocrystal could be prepared by the isothermal slurry conversion crystallization method.

The ternary phase diagrams of 2HNIW·HMX cocrystal system in ethyl acetate at 15 °C. In the HMX–HNIW–ethyl acetate system, HMX and HNIW showed congruent dissolution behavior, and the cocrystal exhibits a wider thermodynamically stable region.

Synthesis and Characterization of Nano-Sized 4-Aminosalicylic Acid-Sulfamethazine Cocrystals

Drug–drug cocrystals are formulated to produce combined medication, not just to modulate active pharmaceutical ingredient (API) properties. Nano-crystals adjust the pharmacokinetic properties and enhance the dissolution of APIs. Nano-cocrystals seem to enhance API properties by combining the benefits of both technologies. Despite the promising opportunities of nano-sized cocrystals, the research at the interface of nano-technology and cocrystals has, however, been described to be in its infancy. In this study, high-pressure homogenization (HPH) and high-power ultrasound were used to prepare nano-sized cocrystals of 4-aminosalysilic acid and sulfamethazine in order to establish differences between the two methods in terms of cocrystal size, morphology, polymorphic form, and dissolution rate enhancement. It was found that both methods resulted in the formation of form I cocrystals with a high degree of crystallinity. HPH yielded nano-sized cocrystals, while those prepared by high-power ultrasound were in the micro-size range. Furthermore, HPH produced smaller-size cocrystals with a narrow size distribution when a higher pressure was used. Cocrystals appeared to be needle-like when prepared by HPH compared to those prepared by high-power ultrasound, which had a different morphology. The highest dissolution enhancement was observed in cocrystals prepared by HPH; however, both micro- and nano-sized cocrystals enhanced the dissolution of sulfamethazine.

Cocrystal Prediction Using Machine Learning Models and Descriptors

Cocrystals are of much interest in industrial application as well as academic research, and screening of suitable coformers for active pharmaceutical ingredients is the most crucial and challenging step in cocrystal development. Recently, machine learning techniques are attracting researchers in many fields including pharmaceutical research such as quantitative structure-activity/property relationship. In this paper, we develop machine learning models to predict cocrystal formation. We extract descriptor values from simplified molecular-input line-entry system (SMILES) of compounds and compare the machine learning models by experiments with our collected data of 1476 instances. As a result, we found that artificial neural network shows great potential as it has the best accuracy, sensitivity, and F1 score. We also found that the model achieved comparable performance with about half of the descriptors chosen by feature selection algorithms. We believe that this will contribute to faster and more accurate cocrystal development.

Pharmaceutical Co-Crystals, Salts, and Co-Amorphous Systems: A Novel Opportunity of Hot Melt Extrusion

Enhancing the solubility of active drug ingredients is a major challenge faced by scientists and researchers. Different approaches have been explored for the enhancement of solubility and physicochemical properties of drugs, without affecting their stability or pharmacological activity. Among the various strategies available, pharmaceutical co-crystals, co-amorphous systems, and pharmaceutical salts as multicomponent systems (MCS) have gained interest to improve physicochemical properties of drugs. Development of MCS by conventional methods involves the utilization of excess amount of solvents, thus, making the product prone to instability, and may also cause harmful side effects in patients. Scale up is critical and involves the investment of huge capital and time. Lately, hot-melt extrusion has been utilized in the development of MCS to enhance solubility, bioavailability, stability, and physicochemical properties of the drugs. In this review, the authors discussed the development of different MCS produced via hot-melt extrusion technology. Specifically, approaches for screening of co-formers and co-crystals, selection of excipients for co-amorphous systems, pharmaceutical salts, and significance of MCS and process parameters affecting product quality are discussed.

Direct compression tablet formulation of celecoxib enabled with a pharmaceutical solvate

Celecoxib, an anti-inflammatory drug for pain and arthritis, is currently only available in capsule form. To reduce the onset time for a faster action and to lower the manufacturing cost, the tablet dosage form is more preferred. However, the commercial celecoxib (Form III) is not suitable for direct compression (DC) tablet manufacture due to poor flow, low bulk density, and tablet lamination. In this work, we overcome these challenges using a pharmaceutically acceptable dimethyl sulfoxide (DMSO) solvate of celecoxib. Aided with the DMSO solvate, an acceptable DC tablet formulation was successfully developed to manufacture tablets containing 200 mg celecoxib, with satisfactory manufacturability, disintegration, and in vitro dissolution performance.

Mechanochemical reactivity inhibited, prohibited and reversed by liquid additives: examples from crystal-form screens

We demonstrate that liquid additives can exert inhibitive or prohibitive effects on the mechanochemical formation of multi-component molecular crystals, and report that certain additives unexpectedly prompt the dismantling of such solids into physical mixtures of their constituents. Computational methods were employed in an attempt to identify possible reasons for these previously unrecognised effects of liquid additives on mechanochemical transformations.

Enhancing the Physiochemical Properties of Puerarin via L-Proline Co-Crystallization: Synthesis, Characterization, and Dissolution Studies of Two Phases of Pharmaceutical Co-Crystals

Puerarin (PUE) is a Chinese traditional medicine known to enhance glucose uptake into the insulin cells to downregulate the blood glucose levels in the treatment of type II diabetes. Nevertheless, the bioavailability of pristine PUE is limited due to its poor solubility and low intestinal permeability. In this work, we demonstrate that the solubility of PUE can be significantly enhanced via its co-crystallization with L-Proline (PRO). Two crystalline phases, namely, the solvate-free form [PUE][PRO] (I) and the solvated form [PUE]₂[PRO]∙EtOH∙(H₂O)₂ (II) are isolated. These two phases are characterized by single-crystal X-ray diffraction (SCXRD), powder X-ray diffraction (PXRD), Fourier-transformed infrared (FT-IR) spectra, nuclear magnetic resonance (NMR), and thermogravimetric analysis in association with differential scanning calorimetry (TGA-DSC). The solubility and dissolution rate of both I and II in water, gastrointestinal tract at pH 1.2, and phosphate buffer at pH 6.8 indicates a nearly doubled increase as compared to the pristine PUE. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay of pristine PUE, I and II against murine colon cancer cell lines CT-26 and human kidney cell lines HEK-293 indicated that neither compound exhibits obvious cytotoxicity after 24 h. This work showcases that the readily available and biocompatible PRO can be a promising adjuvant to enhance the physicochemical properties of PUE toward orally administered drug formulation with improved pharmacokinetics.

Novel Purine Alkaloid Cocrystals with Trimesic and Hemimellitic Acids as Coformers: Synthetic Approach and Supramolecular Analysis

In this work, benzene-1,3,5-tricarboxylic (trimesic acid, TMSA) and benzene-1,2,3-tricarboxylic acid (hemimellitic acid, HMLA) were used as coformers for cocrystal synthesis with chosen purine alkaloids. Theobromine (TBR) forms cocrystals TBR·TMSA and TBR·HMLA with these acids. Theophylline (TPH) forms cocrystals TPH·TMSA and TPH·HMLA, the cocrystal hydrate TPH·TMSA·2H₂O and the salt hydrate (TPH)⁺·(HMLA)^-·2H₂O. Caffeine (CAF) forms the cocrystal CAF·TMSA and the cocrystal hydrate CAF·HMLA·H₂O. The purine alkaloid derivatives were obtained by solution crystallization and by neat or liquid-assisted grinding. The powder X-ray diffraction method was used to confirm the synthesis of the novel substances. All of these solids were structurally characterized, and all synthons formed by purine alkaloids and carboxylic acids were recognized using a single-crystal X-ray diffraction method. The Cambridge Structural Database was used to determine the frequency of occurrence of analyzed supramolecular synthons, which is essential at the crystal structure design stage. Determining the influence of structural causes on the various synthon formations and molecular arrangements in the crystal lattice was possible using structurally similar purine alkaloids and two isomers of benzenetricarboxylic acid. Additionally, UV-vis measurements were made to determine the effect of cocrystallization on purine alkaloid solubility.

Cocrystals to tune oily vitamin E into crystal vitamin E

d-α-tocopherol (d-αToc), the most biologically active form of natural Vitamin E, is oily in appearance and unstable to oxygen. Esterification and encapsulation are generally needed to stabilize and solidify d-αToc for the purpose of its expanding applications. In this study, we propose a more effective way to stabilize and solidify d-αToc oil in one step. By cocrystallization, the melting point of d-αToc is significantly increased, such that the oily d-αToc is successfully transformed into solid form at room temperature. The single crystal structure of d-αToc was firstly uncovered and the molecular interaction in cocrystals was revealed. Crystalline Vitamin E shows high stability to light and temperature. Its spherical crystallization affords good powder flowability, which is extremely important as food or feed additives. Moreover, cocrystal Vitamin E remains the original form of tocopherol without esterification and thus has a great advantage on higher bioavailability. Cocrystallization of oily d-αToc spares the use of acetic ester and a mass of excipients, which is of great environmental importance and greatly reduces the production cost.

Taming the dynamics in a pharmaceutical by cocrystallization: investigating the impact of the coformer by solid-state NMR

The anti-HIV pharmaceutical efavirenz is highly dynamic in its crystalline state, and we show that these dynamics can be tamed through the introduction of a coformer.

The guest polymer effect on the dissolution of drug–polymer crystalline inclusion complexes

A drug–polymer crystalline inclusion complex (IC) is a novel solid form of drug, in which drug molecules form parallel channels, and linear polymer chains reside in these channels. In this study, we used carbamazepine (CBZ) as a model drug, and directly studied the effect of different types of guest polymers on the dissolution properties of drug–polymer ICs. We successfully prepared ICs formed from CBZ with hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(ε-caprolactone) (PCL), respectively, and confirmed that these two drug–polymer ICs both had the same channel-type crystal structure as CBZ form II. During the dissolution test, CBZ–PEG IC showed a faster dissolution rate compared to CBZ form II under both sink and non-sink conditions. CBZ–PCL IC was confirmed to be more stable in aqueous medium, as the guest polymer PCL delayed its transformation to less-soluble crystals during dissolution.

Guest polymers have significant influence on the dissolution of drug–polymer inclusion complex crystals.

Simple and effective purification of a SGLT-2 inhibitor cocrystal Rongliflozin l-pyroglutamic acid: coformer-induced purification

We report and design a simple and robust process to obtain a single and pure crystalline form I (1) of the cocrystal, containing Rongliflozin (2) with l-pyroglutamic acid (l-PA), based on coformer-induced purification (CoIP).

Desolvation of dasatinib methanolate: an improved anhydrous polymorph

A case study portraying how a labile tri-methanol solvate of dasatinib leads to polymorph transformation and particle size reduction.

Molecular salts of quinine: a crystal engineering route to enhance the aqueous solubility

Salts of quinine, with α,ω-aliphatic dicarboxylic acids, and aromatic coformers, show superior aqueous solubility. The structural, thermal and microscopy data provide structural, compositional, and stability profiles of the salts.

Heteroleptic Cu(ii) saccharin complexes: intriguing coordination modes and properties

A new Cu(ii) O,S-coordinated saccharinate complex is reported, showing crystallochromism and NIR emission in the solid state, in silico ligand exchange reactions with N/S-donor ligands in the presence of model molecules mimicking biological targets.

5-[(Pyren-9-ylmethyl)amino]isophthalic acid with nitrogen containing heterocycles: stacking, N–H⋯π interactions and photoluminescence

Synthons guided the types of N–H⋯π interactions and stacking to cause quenching of emissions.

The trimorphism of 3-hydroxybenzoic acid: an experimental and computational study

A computationally driven experimental search for polymorphs of 3-hydroxybenzoic acid confirmed the third form and the small energy differences between the polymorphs.

Variable stoichiometry cocrystals: occurrence and significance

Stoichiometric variation in organic cocrystals, their synthesis, structure elucidation and properties are discussed. Accountable reasons for the occurrence of such cocrystals are emphasised.

A new solvate of clonixin and a comparison of the two clonixin solvates

A new solvate of clonixin (CLX), a dimethylacetamide (DMA) solvate, has been obtained by crystal growth in DMA. The new form was characterized by NMR, single-crystal X-ray diffraction, and PXRD. The crystal structure is stabilized by a strong hydrogen bond between the carboxylic acid OH of CLX and the DMA carbonyl, the strength of which is on par with those of the four solvent-free forms of CLX and the DMF solvate. These previously known forms are based on either the acid–acid homosynthon or the acid–pyridine heterosynthon, depending on the dihedral angle between the two aromatic rings of CLX, or the heterodimer between CLX and DMF. The new solvate loses DMA to convert into form I of CLX, as confirmed by differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD), similar to how the DMF solvate does. A comparison of the two solvates was carried out and theoretical studies were performed to shed light on the conformational difference between the two CLX molecules in the two solvates and the packing differences between them. The insight gained on this solvatomorphic system could aid the design of new solvates and cocrystals of CLX.

A new solvate of clonixin (CLX), a dimethylacetamide (DMA) solvate, has been obtained by crystal growth in DMA.

Novel cocrystals of the potent 1,2,4-thiadiazole-based neuroprotector with carboxylic acids: virtual screening, crystal structures and solubility performance

Five new multicomponent solid forms of the biologically active 1,2,4-thiadiazole derivative (TDZH) with dicarboxylic and hydroxybenzoic acids have been discovered by combined virtual/experimental cocrystal screening.

Intermolecular interactions and solubility behavior of multicomponent crystal forms of 2,4-D: design, structure analysis, and solid-state characterization

Five new multicomponent solid forms of 2,4-D were successfully synthesized. The equilibrium solubility measurement confirmed the improvements in water solubility of new multicomponent crystals.

Multicomponent crystals of an artemisinin derivative and cinchona alkaloids for use as antimalarial drugs

Multicomponent crystals of an artemisinin derivative and cinchona alkaloids were produced, combining two major types of antimalaria drugs with unique hydrogen bond interactions. These salts demonstrate a new category of antimalarial pharmaceuticals.

Cocrystals of regorafenib with dicarboxylic acids: synthesis, characterization and property evaluation

Three cocrystals of regorafenib were synthesized, and two of them demonstrate significantly improved solubility and tabletability without compromising physicochemical stability.