Continuous MOF Membrane-Based Sensors via Functionalization of Interdigitated Electrodes

Three M-MOF-74 (M = Co, Mg, Ni) metal-organic framework (MOF) thin film membranes have been synthesized through a sensor functionalization method for the direct electrical detection of NO₂. The two-step surface functionalization procedure on the glass/Pt interdigitated electrodes resulted in a terminal carboxylate group, with both steps confirmed through infrared spectroscopic analysis. This surface functionalization allowed the MOF materials to grow largely in a uniform manner over the surface of the electrode forming a thin film membrane over the Pt sensing electrodes. The growth of each membrane was confirmed through scanning electron microscopy (SEM) and X-ray diffraction analysis. The Ni and Mg MOFs grew as a continuous but non-defect free membrane with overlapping polycrystallites across the glass surface, whereas the Co-MOF-74 grew discontinuously. To demonstrate the use of these MOF membranes as an NO₂ gas sensor, Ni-MOF-74 was chosen as it was consistently fabricated as the best thin and homogenous membrane, as confirmed by SEM. The membrane was exposed to 5 ppm NO₂ and the impedance magnitude was observed to decrease 123× in 4 h, with a larger change in impedance and a faster response than the bulk material. Importantly, the use of these membranes as a sensor for NO₂ does not require them to be defect-free, but solely continuous and overlapping growth.

Statistic Replacement of Lanthanide Ions in Bis-salicylatoborate Coordination Polymers for the Deliberate Control of the Luminescence Chromaticity

Based on the strand-like coordination polymer (CP) type 1 ∞ [Ln(BSB)3 (py)2 ], [BSB]- =bis-salicylatoborate anion, mixed Eu/Tb-containing compounds of the constitution 1 ∞ [Eux Tb1-x (BSB)3 (py)2 ] were synthesised ionothermally for a phase width of (x=0.25-0.75) and characterized regarding structure and optical properties. Previously, known only for other lanthanides, the mixed 1D-Eu/Tb-CPs show excellent options for statistic replacement of the Ln-cations during synthesis yielding solid solutions. The products are highly luminescent, with the chromaticity being a direct function of the amount of the respective Ln-ions. Corresponding to an overall addition of emission intensities, the green Tb3+ emission and the red Eu3+ emission allow for a chromaticity control that also includes yellow emission. Control of the luminescence colour renders them suitable examples of the versatility of statistic replacement of metal ions in coordination chemistry. In addition, crystallization of [EMIm]2 [YCl5 (py)] illuminates possible other products of the ionothermal reactions of [EMIm][BSB] with LnCl3 constituted by components not being part of the main CPs.

Linker Desymmetrization: Access to a Series of Rare-Earth Tetracarboxylate Frameworks with Eight-Connected Hexanuclear Nodes

The exploration of metal-organic frameworks (MOFs) through the rational design of building units with specific sizes, geometries, and symmetries is essential for enriching the structural diversity of porous solids for applications including storage, separation, and conversion. However, it is still a challenge to directly synthesize rare-earth (RE) MOFs with less connected clusters as a thermodynamically favored product. Herein, we report a systematic investigation on the influence of size, rigidity, and symmetry of linkers over the formation of RE-tetracarboxylate MOFs and uncover the critical role of linker desymmetrization in constructing RE-MOFs with eight-connected hexanuclear clusters. Our results on nine new RE-MOFs, PCN-50X (X = 1-9), indicate that utilization of trapezoidal or tetrahedral linkers provides accesses to traditionally unattainable RE-tetracarboxylate MOFs with 8-c hexanuclear nodes, while the introduction of square or rectangular linkers during the assembly of RE-MOFs based on polynuclear clusters typically leads to the MOFs constructed from 12-c nodes with underlying shp topology. By rational linker design, MOFs with two unprecedented (4, 8)-c nets, lxl and jun, can also be obtained. This work highlights linker desymmetrization as a powerful strategy to enhance MOFs' structural complexity and access MOF materials with nondefault topologies that can be potentially used for separation and catalysis.

Novel synthesis of in situ CeOx nanoparticles decorated on CoP nanosheets for highly efficient electrocatalytic oxygen evolution

CoP nanosheets decorated by in-situ CeOx nanoparticles were designed through a novel two-step solvothermal-phosphating strategy, which act as an electrode exhibit excellent electrocatalytic performance toward OER in alkaline condition.

Effective nitenpyram detection in a dual-walled nitrogen-rich In(iii)/Tb(iii)–organic framework

A heterometallic MOF probe with the advantages of strong fluorescence, simple synthesis, high density of Lewis acidic and basic sites, and repeatable use, has been designed and synthesized, which exhibits a rapid and sensitive reaction to nitenpyram.

Diverse physical functionalities of rare-earth hexacyanidometallate frameworks and their molecular analogues

The combination of rare-earth metal complexes and hexacyanidometallates of transition metals is a fruitful pathway for achieving functional materials exhibiting a wide scope of mechanical, magnetic, optical, and electrochemical properties.

Luminescence response mode and chemical sensing mechanism for lanthanide-functionalized metal–organic framework hybrids

This comprehensive review systematically summarizes the luminescence response mode and chemical sensing mechanism for lanthanide-functionalized MOF hybrids (abbreviated as LnFMOFH).

Active metal single-sites based on metal–organic frameworks: construction and chemical prospects

Metal single-point is a novel and potential design strategy that has been applied for the development of metal organic frameworks.

A microporous -topology metal–organic framework with an unprecedented high-nuclearity Co10-cluster for iodine capture and histidine detection

A microporous shp-topology metal–organic framework (JNU-200) constructed with 12-connected high-nuclearity Co₁₀-cluster and 4-connected carboxylate ligand for iodine capture and histidine detection.

Efficient detection of Fe(iii) and chromate ions in water using two robust lanthanide metal–organic frameworks

Two novel robust Ln-MOFs feature a 3D highly porous pillared-layer framework and demonstrate selective sensing of Fe(iii) and chromate ions in aqueous solution.

Using geometric simulation software ‘GASP’ to model conformational flexibility in a family of zinc metal–organic frameworks

Synthesis with different solvents leads the same metals and ligands to assemble into geometrically and topologically distinct frameworks, aided by intrinsic flexibility of the ligand.

Photochromic and photocontrolled luminescent rare-earth D–A hybrid crystals based on rigid viologen acceptors

Due to the introduction of a strong electron donor, CoIII(CN)63−, into the structure, the rare-earth donor–acceptor (D–A) hybrid crystal shows enhanced photochromism. The coordinative Eu3+ cation is also beneficial toward improving the luminescence.

Recent progress of MOF-derived porous carbon materials for microwave absorption

Microwave absorbing materials (MAM) have attracted considerable attention over the years in stealth and information technologies. Metal–organic framework (MOF) with a unique microstructure and electronic state has become an attractive focus as self-sacrificing precursors of microwave absorbers. The MOF-derived porous carbon (PC) materials exhibit a high absorbing performance due to the stable three-dimensional structure and homogeneous distribution of metal particles. MOF-derived PC materials are promising for ideal MAM via tuning of the structure and composition, resulting in appropriate impedance matching and the synergistic effect between magnetic and dielectric loss. In this review, the MOF-derived PC materials and their basic absorption mechanisms (dielectric loss, magnetic loss and impedance matching) are introduced, as well as the characters of various MOF-derived PC materials. In addition, this review provides a comprehensive introduction and tabulates the recent progress based on the classification of the MOF-derived metallic state, such as pure PC (without reduced metals), mono-metal/PC, multi-metal/PC, metal oxides/PC and other derived PC composites. Finally, the challenges faced by MOF-derived PC materials are overviewed, and their further development is mentioned.

MOF-derived PC materials with unique characteristic have been widely concerned as microwave absorbers over the years.

Distinct and Selective Amine- and Anion-Responsive Behaviors of an Electron-Deficient and Anion-Exchangeable Metal-Organic Framework

Smart materials that respond to chemical stimuli with color or luminescence changes are highly desirable for daily-life and high-tech applications. Here, we report a novel porous metal-organic framework (MOF) that shows multiple, selective, and discriminative responsive properties owing to the combination of different functional ingredients [tripyridinium chromogen, Eu(III) luminophore, cationic framework, and special porous structure]. The MOF contains two interpenetrated three-dimensional cationic coordination networks built of a tetrahedral [Eu₄(μ₃-OH)₄] cluster and a tripyridinium-tricarboxylate zwitterionic linker. It shows reversible and discriminative chromic response to aliphatic amines and aniline through different host-guest interactions between electron-deficient pyridinium and electron-rich amines. The size- and shape-selective response to aliphatic amines is ascribed to the radical formation through host-guest electron transfer, whereas the response to aniline is ascribed to the formation of sandwich-type acceptor-donor-acceptor complexes. The MOF is capable of reversible anion exchange with various anions and shows selective and discriminative ionochromic response to iodide, bromide, and thiocyanate, which is attributed to charge-transfer complexation. The above chromic behaviors are accompanied by efficient quenching of Eu(III) photoluminescence. The MOF represents a multi-stimuli dual-output responsive system. It can be used for discrimination and identification of anions and amines. The potential use in invisible printing, reusable sensory films, and optical switches was demonstrated by the ink and the membrane made of the MOF and organic polymers.