Sources, pathways, and relative risks of contaminants in surface water and groundwater: a perspective prepared for the Walkerton inquiry

Neurobehavioral development in children with potential exposure to pesticides

BACKGROUND

Children may be at higher risk than adults from pesticide exposure, due to their rapidly developing physiology, unique behavioral patterns, and interactions with the physical environment. This preliminary study conducted in Ecuador examines the association between household and environmental risk factors for pesticide exposure and neurobehavioral development.

METHODS

We collected data over 6 months in the rural highland region of Cayambe, Ecuador (2003-2004). Children age 24-61 months residing in 3 communities were assessed with the Ages and Stages Questionnaire and the Visual Motor Integration Test. We gathered information on maternal health and work characteristics, the home and community environment, and child characteristics. Growth measurements and a hemoglobin finger-prick blood test were obtained. Multiple linear regression analyses were conducted.

RESULTS

Current maternal employment in the flower industry was associated with better developmental scores. Longer hours playing outdoors were associated with lower gross and fine motor and problem solving skills. Children who played with irrigation water scored lower on fine motor skills (8% decrease; 95% confidence interval = -9.31 to -0.53), problem-solving skills (7% decrease; -8.40 to -0.39), and Visual Motor Integration test scores (3% decrease; -12.00 to 1.08).

CONCLUSIONS

These results suggest that certain environmental risk factors for exposure to pesticides may affect child development, with contact with irrigation water of particular concern. However, the relationships between these risk factors and social characteristics are complex, as corporate agriculture may increase risk through pesticide exposure and environmental contamination, while indirectly promoting healthy development by providing health care, relatively higher salaries, and daycare options.

New method for evaluation of genotoxicity, based on the use of real-time PCR and lysogenic gram-positive and gram-negative bacteria

A method for the detection of the SOS response as measured by the liberation of resident prophages from the genomes of their hosts is described. It is based on the use of two converging oligonucleotides that flank the attP attachment site of the phage as primers for real-time PCR. Amplification was observed only after the phage DNA became excised. The system responds to both chemicals and physical conditions. Quantitative data on the concentration and/or potency of the genotoxic condition were obtained. Results can be achieved within 1 day and are less susceptible to possible toxic effects than phage generation or other methods that require DNA synthesis. The use of both gram-positive and gram-negative bacteria widens the range of compounds that can be tested because it eliminates impermeability problems derived from the particular composition of each cell wall type.

An exposure assessment for selected pharmaceuticals within a watershed in Southern Ontario

Recent studies from a number of countries have shown that measurable concentrations of both human and veterinary pharmaceuticals can be found in a variety of environmental matrices such as surface and ground water, soils, and sediments. Few data are available that characterize the sources, exposure and effects of pharmaceuticals in the environment and there is clearly a need to define these parameters within a Canadian context. We present in this paper the first report in southern Ontario, Canada on the geographic and temporal distribution of pharmaceuticals detected within seven tributaries receiving primarily agricultural inputs in a typical watershed. Of the 28 pharmaceuticals surveyed, 14 were detected in the streams sampled (n=125). Temporal trends in concentration for five frequently detected pharmaceuticals show pulses occurring between May and November of 2003 at similar but varying times over the seasons, depending on the pharmaceuticals, flow rate, and precipitation. Fluctuations in concentration of ions indicative of agricultural run off, such as nitrate and phosphate, were not found to be useful predictors of changes in pharmaceutical concentration (P>0.4), however a significant correlation between dissolved organic carbon and monensin and carbamazepine concentrations were observed (P<0.013). Exposure profiles illustrating concentration distributions for three of the more prevalent pharmaceuticals detected, including lincomycin, monensin and carbamazepine, showed a log normal distribution, useful for calculating centiles of environmental concentrations. While distributions of estimated total potency of pharmaceuticals detected in the surface waters suggested small risks of environmental effects of mixtures to daphnia, green algae, Lemna gibba, and fish, the significance of non-target effects and impacts due to chronic low level exposures to chemical mixtures remains unclear.

Molecular biology and DNA microarray technology for microbial quality monitoring of water

Public concern over polluted water is a major environmental issue worldwide. Microbial contamination of water arguably represents the most significant risk to human health on a global scale. An important challenge in modern water microbial quality monitoring is the rapid, specific, and sensitive detection of microbial indicators and waterborne pathogens. Presently, microbial tests are based essentially on time-consuming culture methods. Rapid microbiological analyses and detection of rare events in water systems are important challenges in water safety assessment since culture methods present serious limitations from both quantitative and qualitative points of view. To circumvent lengthy culture methods, newer enzymatic, immunological, and genetic methods are being developed as an alternative. DNA microarray technology is a new and promising tool that allows the detection of several hundred or even thousands DNA sequences simultaneously. Recent advances in sample processing and DNA microarray technologies provide new perspectives to assess microbial water quality. The aims of this review are to (1) summarize what is currently known about microbial indicators, (2) describe the most important waterborne pathogens, (3) present molecular methods used to monitor the presence of pathogens in water, and (4) show the potential of DNA microarrays in water quality monitoring.

Mutagens in contaminated soil: a review

The intentional and accidental discharges of toxic pollutants into the lithosphere results in soil contamination. In some cases (e.g., wood preserving wastes, coal-tar, airborne combustion by-products), the contaminated soil constitutes a genotoxic hazard. This work is a comprehensive review of published information on soil mutagenicity. In total, 1312 assessments of genotoxic activity from 118 works were examined. The majority of the assessments (37.6%) employed the Salmonella mutagenicity test with strains TA98 and/or TA100. An additional 37.6% of the assessments employed a variety of plant species (e.g., Tradescantia clone 4430, Vicia faba, Zea mays, Allium cepa) to assess mutagenic activity. The compiled data on Salmonella mutagenicity indicates significant differences (p<0.0001) in mean potency (revertents per gram dry weight) between industrial, urban, and rural/agricultural sites. Additional analyses showed significant empirical relationships between S9-activated TA98 mutagenicity and soil polycyclic aromatic hydrocarbon (PAH) concentration (r2=0.19 to 0.25, p<0.0001), and between direct-acting TA98 mutagenicity and soil dinitropyrene (DNP) concentration (r2=0.87, p<0.0001). The plant assay data revealed excellent response ranges and significant differences between heavily contaminated, industrial, rural/agricultural, and reference sites, for the anaphase aberration in Allium cepa (direct soil contact) and the waxy locus mutation assay in Zea mays (direct soil contact). The Tradescantia assays appeared to be less responsive, particularly for exposures to aqueous soil leachates. Additional data analyses showed empirical relationships between anaphase aberrations in Allium, or mutations in Arabidopsis, and the 137Cs contamination of soils. Induction of micronuclei in Tradescantia is significantly related to the soil concentration of several metals (e.g., Sb, Cu, Cr, As, Pb, Cd, Ni, Zn). Review of published remediation exercises showed effective removal of genotoxic petrochemical wastes within one year. Remediation of more refractory genotoxic material (e.g., explosives, creosote) frequently showed increases in mutagenic hazard that remained for extended periods. Despite substantial contamination and mutagenic hazards, the risk of adverse effect (e.g., mutation, cancer) in humans or terrestrial biota is difficult to quantify.

Disturbed microtubule function and induction of micronuclei by chelate complexes of mercury(II)

Interactions of mercury(II) with the microtubule network of cells may lead to genotoxicity. Complexation of mercury(II) with EDTA is currently being discussed for its employment in detoxification processes of polluted sites. This prompted us to re-evaluate the effects of such complexing agents on certain aspects of mercury toxicity, by examining the influences of mercury(II) complexes on tubulin assembly and kinesin-driven motility of microtubules. The genotoxic effects were studied using the micronucleus assay in V79 Chinese hamster fibroblasts. Mercury(II) complexes with EDTA and related chelators interfered dose-dependently with tubulin assembly and microtubule motility in vitro. The no-effect-concentration for assembly inhibition was 1 microM of complexed Hg(II), and for inhibition of motility it was 0.05 microM, respectively. These findings are supported on the genotoxicity level by the results of the micronucleus assay, with micronuclei being induced dose-dependently starting at concentrations of about 0.05 microM of complexed Hg(II). Generally, the no-effect-concentrations for complexed mercury(II) found in the cell-free systems and in cellular assays (including the micronucleus test) were identical with or similar to results for mercury tested in the absence of chelators. This indicates that mercury(II) has a much higher affinity to sulfhydryls of cytoskeletal proteins than to this type of complexing agents. Therefore, the suitability of EDTA and related compounds for remediation of environmental mercury contamination or for other detoxification purposes involving mercury has to be questioned.

Identification of bacterial populations in dairy wastewaters by use of 16S rRNA gene sequences and other genetic markers

Hydraulic flush waste removal systems coupled to solid/liquid separators and circulated treatment lagoons are commonly utilized to manage the large amounts of animal waste produced on high-intensity dairy farms. Although these systems are common, little is known about the microbial populations that inhabit them or how they change as they traverse the system. Using culture-based and non-culture-based methods, we characterized the microbial community structure of manure, water from the separator pit, and water from the circulated treatment lagoon from a large dairy in the San Joaquin Valley of California. Our results show that both total bacterial numbers and bacterial diversity are highest in manure, followed by the separator pit water and the lagoon water. The most prevalent phylum in all locations was the Firmicutes (low-G+C, gram-positive bacteria). The most commonly occurring operational taxonomic unit (OTU) had a 16S rRNA gene (rDNA) sequence 96 to 99% similar to that of Clostridium lituseburense and represented approximately 6% of the manure derived sequences, 14% of the separator pit-derived sequences and 20% of the lagoon-derived sequences. Also highly prevalent was an OTU with a 16S rDNA sequence 97 to 100% similar to that of Eubacterium tenue, comprising approximately 3% of the manure-derived sequences, 6% of the separator pit-derived sequences and 9% of the lagoon-derived sequences. Taken together, these sequences represent approximately one-third of the total organisms in the lagoon waters, suggesting that they are well adapted to this environment.

Adsorption kinetics of herbicide paraquat from aqueous solution onto activated bleaching earth

In the present study, the activated bleaching earth was used as adsorbent for the herbicide paraquat adsorption in a batch adsorber. The rate of adsorption has been investigated under the controlled process parameters like agitation speed, initial paraquat concentration, adsorbent dosage and temperature. A batch kinetic model, based on the assumption of a pseudo-second order mechanism, has been tested to predict the rate constant of adsorption, equilibrium adsorption capacity, time of half-adsorption, and equilibrium concentration by the fittings of the experimental data. The results of the kinetic studies show that the adsorption process can be well described with the pseudo-second order equation. Based on the isotherm data obtained from the fittings of the adsorption kinetics, Freundlich model appears to fit the adsorption better than Langmuir model. In addition, the effective diffusion coefficient has also been estimated based on the restrictive diffusion model.

Lethal and teratogenic effects of naringenin evaluated by means of an amphibian embryo toxicity test (AMPHITOX)

The effect of naringenin on the survival and morphogenesis of amphibian embryos was evaluated by means of the AMPHITOX test reporting early life stage and chronic toxicity effects. Lethality, malformation incidence and the degree of adverse effects were concentration-dependent. The Teratogenic Index (TI) for naringenin was 2 pointing out the high developmental hazard of this substance. For instance, 10 mg/l naringenin exerted 100% malformations while only 30% of the abnormal embryos died. Main abnormalities were reduced body size, axial curves, microcephaly, abdominal edema, underdeveloped gills and delayed development. Scanning electronic microscopy (SEM) showed alterations in epithelial cell shapes related to malformations. The results obtained by means of treatment of Bufo arenarum embryos with naringenin from complete operculum stage onwards show that at this final stage of development, the susceptibility of the embryos to this flavonoid is slightly lower for lethal effects but exerted sublethal adverse effects such as transient narcosis, abnormal contortions, loss of equilibrium, reduced motility and edema. Overall, amphibian early life stages appeared more susceptible to the embryotoxicity associated with exposure to naringenin, especially at concentrations greater than 5 mg/l. This increased susceptibility may result from the relatively high rates of cellular differentiation and morphogenesis that occur at this early stage of development.

Effect of particle size of activated clay on the adsorption of paraquat from aqueous solution

This paper describes the effect of particle size on the process of paraquat adsorption from aqueous solution onto an activated clay surface at 25 degrees C and initial pH 11.0. Measurements of the pore properties of the clay adsorbents with three different particle sizes (0.053-0.074 mm, 0.037-0.053 mm, and <0.037 mm) were carried out. The rates and isotherms of adsorption have been also investigated by batch methods under the controlled conditions. From the experimental results obtained, the adsorption process can be well described with the pseudo-second order model and Freundlich model for adsorption kinetics and adsorption isotherm, respectively. In addition, the effect of the particle size of the clay adsorbent on the adsorption kinetics was found to be of considerable significance; namely, the rate constant (k) of paraquat adsorption by the clay adsorbent decreased with increasing particle size. It was concluded that the pore properties (i.e., surface area and total pore volume) and particle size of the clay adsorbent played a significant role in determining adsorption capacity and adsorption rate, respectively.

Sol-gel-coated mid-infrared fiber-optic sensors

Application of organically modified sol-gels as novel recognition membranes for mid-infrared fiber-optic sensors is demonstrated for the first time by in situ detection of nitro-based aromatic compounds in aqueous media. Sol-gels were prepared by acid- and base-catalyzed copolymerization of alkyltrimethoxysiloxanes and applied onto the surface of silver halide (AgCl(0.3)Br(0.7)) fibers by drip coating. The coating process was monitored in situ using Fourier transform infrared (FT-IR) spectroscopy. Homogeneity of the layers was analyzed by scanning electron microscopy. Sol-gel-coated evanescent held sensors were investigated with respect to their capacity to suppress interfering water background absorptions, repeatability of dissolved analyte enrichment, and sensor response time. Nitrobenzene and parathion are the investigated analytes; figures of merit are derived from calibration curves determined to assess sensitivity and reproducibility of the developed sensor system. It can be concluded that sol-gel-coated infrared fiber-optic sensors enable reproducible detection of nitro-based aromatic compounds in the low ppm concentration range. Due to wide flexibility in tuning chemical properties of sol-gel films along with superior mechanical and chemical stability, organically modified sol-gels represent highly interesting coating materials for mid-infrared sensing applications.

A tap water turbidity crisis in Tel Aviv, Israel, due to technical failure: toxicological and risk management issues

Herein, we report on the actual events linked to an ammonia spillage into the main waterline of the Tel-Aviv metropolitan area and its surrounding municipalities. Based upon a large magnitude increase of unknown origin in the turbidity and ammonia levels of the main drinking water supply, area residents were warned of possible serious contamination and advised to refrain from drinking tap water until further notice. Turbidity was later linked only to CaCO3, which was precipitated from the water due to the rise in pH caused by the excessive ammonia levels. The source of the ammonia (a malfunction of the measurement buoy in the ammonia tank) was not identified until several days after the warning was issued. The toxicological implications of the turbidity and ammonia elevations are considered and reconciled with the management strategies that followed. Of consequence to the management of this crisis was the approach of Ministry of Health officials to regard the ammonia, from the onset, as an indicator of several possible sources of origin rather than as a contaminant. Decision-making policies were hampered by ineffective communication between the national water supplier and government health officials. An outcome of this crisis was a heightened awareness of the potential of a water crisis occurring during peace time and not only in association with terrorist activities, to which Israeli citizens are highly sensitized. Finally, the present paper may serve to guide municipal environmental and health officials more appropriately in the event of similar drinking water crises in Israel or elsewhere.

Electrochemical biosensors for environmental monitoring

Highly sensitive electrochemical biosensors offer precision, sensitivity, rapidity, and ease of operation for on-site environmental analysis. An electrochemical biosensor is an analytical device in which a specific biological recognition element (bioreceptor) is integrated within or intimately associated with an electrode (transducer) that converts the recognition event to a measurable electrical signal for the purpose of detecting a target compound (analyte) in solution. The signal generated allows both qualitative and quantitative measurements of an analyte in real time. In most cases, a miniaturized electrochemical cell contains a low volume of analyte, which is vital when dealing with hazardous materials and makes such devices ideal for environmental monitoring. This approach not only provides the means for on-site analysis but also removes the time delay and sample alteration that can occur during transport to a centralized laboratory. We first address the basic principles of electroanalytical measurement and the merger of electrochemistry and biology into a biosensing system, and then we discuss various environmental monitoring strategies involving this technology.