Predictable tuning of protein expression in bacteria

We comprehensively assessed the contribution of the Shine-Dalgarno sequence to protein expression and used the data to develop EMOPEC (Empirical Model and Oligos for Protein Expression Changes; http://emopec.biosustain.dtu.dk). EMOPEC is a free tool that makes it possible to modulate the expression level of any Escherichia coli gene by changing only a few bases. Measured protein levels for 91% of our designed sequences were within twofold of the desired target level.

Synthetic Biology for Cell-Free Biosynthesis: Fundamentals of Designing Novel In Vitro Multi-Enzyme Reaction Networks

Cell-free biosynthesis in the form of in vitro multi-enzyme reaction networks or enzyme cascade reactions emerges as a promising tool to carry out complex catalysis in one-step, one-vessel settings. It combines the advantages of well-established in vitro biocatalysis with the power of multi-step in vivo pathways. Such cascades have been successfully applied to the synthesis of fine and bulk chemicals, monomers and complex polymers of chemical importance, and energy molecules from renewable resources as well as electricity. The scale of these initial attempts remains small, suggesting that more robust control of such systems and more efficient optimization are currently major bottlenecks. To this end, the very nature of enzyme cascade reactions as multi-membered systems requires novel approaches for implementation and optimization, some of which can be obtained from in vivo disciplines (such as pathway refactoring and DNA assembly), and some of which can be built on the unique, cell-free properties of cascade reactions (such as easy analytical access to all system intermediates to facilitate modeling).

Tunable Riboregulator Switches for Post-transcriptional Control of Gene Expression

Until recently, engineering strategies for altering gene expression have focused on transcription control using strong inducible promoters or one of several methods to knock down wasteful genes. Recently, synthetic riboregulators have been developed for translational regulation of gene expression. Here, we report a new modular synthetic riboregulator class that has the potential to finely tune protein expression and independently control the concentration of each enzyme in an engineered metabolic pathway. This development is important because the most straightforward approach to altering the flux through a particular metabolic step is to increase or decrease the concentration of the enzyme. Our design includes a cis-repressor at the 5' end of the mRNA that forms a stem-loop helix, occluding the ribosomal binding sequence and blocking translation. A trans-expressed activating-RNA frees the ribosomal-binding sequence, which turns on translation. The overall architecture of the riboregulators is designed using Watson-Crick base-pairing stability. We describe here a cis-repressor that can completely shut off translation of antibiotic-resistance reporters and a trans-activator that restores translation. We have established that it is possible to use these riboregulators to achieve translational control of gene expression over a wide dynamic range. We have also found that a targeting sequence can be modified to develop riboregulators that can, in principle, independently regulate translation of many genes. In a selection experiment, we demonstrated that by subtly altering the sequence of the trans-activator it is possible to alter the ratio of the repressed and activated states and to achieve intermediate translational control.

Bacterial Recombineering: Genome Engineering via Phage-Based Homologous Recombination

The ability to specifically modify bacterial genomes in a precise and efficient manner is highly desired in various fields, ranging from molecular genetics to metabolic engineering and synthetic biology. Much has changed from the initial realization that phage-derived genes may be employed for such tasks to today, where recombineering enables complex genetic edits within a genome or a population. Here, we review the major developments leading to recombineering becoming the method of choice for in situ bacterial genome editing while highlighting the various applications of recombineering in pushing the boundaries of synthetic biology. We also present the current understanding of the mechanism of recombineering. Finally, we discuss in detail issues surrounding recombineering efficiency and future directions for recombineering-based genome editing.

Putting RNA to work: Translating RNA fundamentals into biotechnological engineering practice

Synthetic biology, in close concert with systems biology, is revolutionizing the field of metabolic engineering by providing novel tools and technologies to rationally, in a standardized way, reroute metabolism with a view to optimally converting renewable resources into a broad range of bio-products, bio-materials and bio-energy. Increasingly, these novel synthetic biology tools are exploiting the extensive programmable nature of RNA, vis-à-vis DNA- and protein-based devices, to rationally design standardized, composable, and orthogonal parts, which can be scaled and tuned promptly and at will. This review gives an extensive overview of the recently developed parts and tools for i) modulating gene expression ii) building genetic circuits iii) detecting molecules, iv) reporting cellular processes and v) building RNA nanostructures. These parts and tools are becoming necessary armamentarium for contemporary metabolic engineering. Furthermore, the design criteria, technological challenges, and recent metabolic engineering success stories of the use of RNA devices are highlighted. Finally, the future trends in transforming metabolism through RNA engineering are critically evaluated and summarized.

13 C flux analysis of cyanobacterial metabolism

(13)C metabolic flux analysis (MFA) has made important contributions to our understanding of the physiology of model strains of E. coli and yeast, and it has been widely used to guide metabolic engineering efforts in these microorganisms. Recent advancements in (13)C MFA methodology combined with publicly available software tools are creating new opportunities to extend this approach to examine less characterized microbes. In particular, growing interest in the use of cyanobacteria as industrial hosts for photosynthetic production of biofuels and biochemicals has led to a critical need to better understand how cyanobacterial metabolic fluxes are regulated in response to changes in growth conditions or introduction of heterologous pathways. In this contribution, we review several prior studies that have applied isotopic steady-state (13)C MFA to examine heterotrophic or mixotrophic growth of cyanobacteria, as well as recent studies that have pioneered the use of isotopically nonstationary MFA (INST-MFA) to study autotrophic cultures. We also provide recommendations for the design and analysis of INST-MFA experiments in cyanobacteria, based on our previous experience and a series of simulation studies used to assess the selection of measurements and sample time points. We anticipate that this emerging knowledgebase of prior (13)C MFA studies, optimized experimental protocols, and public software tools will catalyze increasing use of (13)C MFA techniques by the cyanobacteria research community.

Modular pathway rewiring of Saccharomyces cerevisiae enables high-level production of L-ornithine

Baker's yeast Saccharomyces cerevisiae is an attractive cell factory for production of chemicals and biofuels. Many different products have been produced in this cell factory by reconstruction of heterologous biosynthetic pathways; however, endogenous metabolism by itself involves many metabolites of industrial interest, and de-regulation of endogenous pathways to ensure efficient carbon channelling to such metabolites is therefore of high interest. Furthermore, many of these may serve as precursors for the biosynthesis of complex natural products, and hence strains overproducing certain pathway intermediates can serve as platform cell factories for production of such products. Here we implement a modular pathway rewiring (MPR) strategy and demonstrate its use for pathway optimization resulting in high-level production of L-ornithine, an intermediate of L-arginine biosynthesis and a precursor metabolite for a range of different natural products. The MPR strategy involves rewiring of the urea cycle, subcellular trafficking engineering and pathway re-localization, and improving precursor supply either through attenuation of the Crabtree effect or through the use of controlled fed-batch fermentations, leading to an L-ornithine titre of 1,041±47 mg l⁻¹ with a yield of 67 mg (g glucose)⁻¹ in shake-flask cultures and a titre of 5.1 g l⁻¹ in fed-batch cultivations. Our study represents the first comprehensive study on overproducing an amino-acid intermediate in yeast, and our results demonstrate the potential to use yeast more extensively for low-cost production of many high-value amino-acid-derived chemicals.

The complexity of yeast amino acid metabolism has limited carbon channelling to produce valuable chemical metabolites. Here, the authors implement a yeast customized pathway optimization strategy and demonstrate its use for overproduction of L-ornithine, an intermediate of L-arginine biosynthesis.

Metabolic network capacity of Escherichia coli for Krebs cycle-dependent proline hydroxylation

Background

Understanding the metabolism of the microbial host is essential for the development and optimization of whole-cell based biocatalytic processes, as it dictates production efficiency. This is especially true for redox biocatalysis where metabolically active cells are employed because of the cofactor/cosubstrate regenerative capacity endogenous in the host. Recombinant Escherichia coli was used for overproducing proline-4-hydroxylase (P4H), a dioxygenase catalyzing the hydroxylation of free l-proline into trans-4-hydroxy-l-proline with a-ketoglutarate (a-KG) as cosubstrate. In this whole-cell biocatalyst, central carbon metabolism provides the required cosubstrate a-KG, coupling P4H biocatalytic performance directly to carbon metabolism and metabolic activity. By applying both experimental and computational biology tools, such as metabolic engineering and ¹³C-metabolic flux analysis (¹³C-MFA), we investigated and quantitatively described the physiological, metabolic, and bioenergetic response of the whole-cell biocatalyst to the targeted bioconversion and identified possible metabolic bottlenecks for further rational pathway engineering.

Results

A proline degradation-deficient E. coli strain was constructed by deleting the putA gene encoding proline dehydrogenase. Whole-cell biotransformations with this mutant strain led not only to quantitative proline hydroxylation but also to a doubling of the specific trans-4-l-hydroxyproline (hyp) formation rate, compared to the wild type. Analysis of carbon flux through central metabolism of the mutant strain revealed that the increased a-KG demand for P4H activity did not enhance the a-KG generating flux, indicating a tightly regulated TCA cycle operation under the conditions studied. In the wild type strain, P4H synthesis and catalysis caused a reduction in biomass yield. Interestingly, the ΔputA strain additionally compensated the associated ATP and NADH loss by reducing maintenance energy demands at comparably low glucose uptake rates, instead of increasing the TCA activity.

Conclusions

The putA knockout in recombinant E. coli BL21(DE3)(pLysS) was found to be promising for productive P4H catalysis not only in terms of biotransformation yield, but also regarding the rates for biotransformation and proline uptake and the yield of hyp on the energy source. The results indicate that, upon a putA knockout, the coupling of the TCA-cycle to proline hydroxylation via the cosubstrate a-KG becomes a key factor constraining and a target to further improve the efficiency of a-KG-dependent biotransformations.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-015-0298-1) contains supplementary material, which is available to authorized users.

Metabolic engineering for isoprenoid-based biofuel production

Sustainable economic and industrial growth is the need of the hour and it requires renewable energy resources having better performance and compatibility with existing fuel infrastructure from biological routes. Isoprenoids (C ≥ 5) can be a potential alternative due to their diverse nature and physiochemical properties similar to that of petroleum based fuels. In the past decade, extensive research has been done to utilize metabolic engineering strategies in micro-organisms primarily, (i) to overcome the limitations associated with their natural and non-natural production and (ii) to develop commercially competent microbial strain for isoprenoid-based biofuel production. This review briefly describes the engineered isoprenoid biosynthetic pathways in well-characterized microbial systems for the production of several isoprenoid-based biofuels and fuel precursors.

Engineering Escherichia coli coculture systems for the production of biochemical products

Engineering microbial consortia to express complex biosynthetic pathways efficiently for the production of valuable compounds is a promising approach for metabolic engineering and synthetic biology. Here, we report the design, optimization, and scale-up of an Escherichia coli-E. coli coculture that successfully overcomes fundamental microbial production limitations, such as high-level intermediate secretion and low-efficiency sugar mixture utilization. For the production of the important chemical cis,cis-muconic acid, we show that the coculture approach achieves a production yield of 0.35 g/g from a glucose/xylose mixture, which is significantly higher than reported in previous reports. By efficiently producing another compound, 4-hydroxybenzoic acid, we also demonstrate that the approach is generally applicable for biosynthesis of other important industrial products.

The LASER database: Formalizing design rules for metabolic engineering

The ability of metabolic engineers to conceptualize, implement, and evaluate strain designs has dramatically increased in the last decade. Unlike other engineering fields, no centralized, open-access, and easily searched repository exists for cataloging these designs and the lessons learned from their construction and evaluation. To address this issue, we have developed a repository for metabolic engineering strain designs, known as LASER (Learning Assisted Strain EngineeRing, laser.colorado.edu) and a formal standard for disseminating designs to metabolic engineers. Curation of every available genetically-defined E. coli and S. cerevisiae strain from 310 metabolic engineering papers published over the last 21 years yields a total of 417 designs containing a total of 2661 genetic modifications. This collection has been deposited in LASER and represents the known bibliome of genetically defined and tested metabolic engineering designs in the academic literature. Properties of LASER designs and the analysis pipeline are examined to provide insight into LASER capabilities. Several future research directions utilizing LASER capabilities are discussed to highlight the potential of the LASER database for metabolic engineering.

Artificial de novo biosynthesis of hydroxystyrene derivatives in a tyrosine overproducing Escherichia coli strain

Background

Styrene and its derivatives as monomers and petroleum-based feedstocks are valuable as raw materials in industrial processes. The chemical reaction for styrene production uses harsh reaction conditions such as high temperatures or pressures, or requires base catalysis with microwave heating. On the other hand, production of styrene and its derivatives in Escherichia coli is an environmental friendly process to produce conventional petroleum-based feedstocks.

Results

An artificial biosynthetic pathway was developed in E. coli that yields 4-hydroxystyrene, 3,4-dihydroxystyrene and 4-hydroxy-3-methoxystyrene from simple carbon sources. This artificial biosynthetic pathway has a codon-optimized phenolic acid decarboxylase (pad) gene from Bacillus and some of the phenolic acid biosynthetic genes. E. coli strains with the tal and pad genes, the tal, sam5, and pad genes, and the tal, sam5, com, and pad genes produced 4-hydroxystyrene, 3,4-dihydroxystyrene and 4-hydorxy-3-methoxystyrene, respectively. Furthermore, these pathways were expressed in a tyrosine overproducing E. coli. The yields for 4-hydroxystyrene, 3,4-dihydroxystyrene and 4-hydorxy-3-methoxystyrene reached 355, 63, and 64 mg/L, respectively, in shaking flasks after 36 h of cultivation.

Conclusions

Our system is the first to use E. coli with artificial biosynthetic pathways for the de novo synthesis of 3,4-dihydroxystyrene and 4-hydroxy-3-methoxystyrene in a simple glucose medium. Similar approaches using microbial synthesis from simple sugar could be useful in the synthesis of plant-based aromatic chemicals.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-015-0268-7) contains supplementary material, which is available to authorized users.

Posttranslational regulation of microbial metabolism

Fluxes in microbial metabolism are controlled by various regulatory layers that alter abundance or activity of metabolic enzymes. Recent studies suggest a division of labor between these layers: transcriptional regulation mostly controls the allocation of protein resources, passive flux regulation by enzyme saturation and thermodynamics allows rapid responses at the expense of higher protein cost, and posttranslational regulation is utilized by cells to directly take control of metabolic decisions. We present recent advances in elucidating the role of these regulatory layers, focusing on posttranslational modifications and allosteric interactions. As the systematic mapping of posttranslational regulatory events has now become possible, the next challenge is to identify those regulatory events that are functionally relevant under a given condition.

Using non-enzymatic chemistry to influence microbial metabolism

The structural manipulation of small molecule metabolites occurs in all organisms and plays a fundamental role in essentially all biological processes. Despite an increasing interest in developing new, non-enzymatic chemical reactions capable of functioning in the presence of living organisms, the ability of such transformations to interface with cellular metabolism and influence biological function is a comparatively underexplored area of research. This review will discuss efforts to combine non-enzymatic chemistry with microbial metabolism. We will highlight recent and historical uses of non-biological reactions to study microbial growth and function, the use of non-enzymatic transformations to rescue auxotrophic microorganisms, and the combination of engineered microbial metabolism and biocompatible chemical reactions for organic synthesis.

The coupling of glycolysis and the Rubisco-based pathway through the non-oxidative pentose phosphate pathway to achieve low carbon dioxide emission fermentation

In this study, Rubisco-based engineered Escherichia coli, containing two heterologous enzymes of ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) and phosphoribulokinase (PrkA), has been shown to be capable of the in situ recycling of carbon dioxide (CO2) during glycolysis. Two alternative approaches have been proposed to further enhance the carbon flow from glycolysis to a Rubisco-based pathway through the non-oxidative pentose phosphate pathway (NOPPP). The first is achieved by elevating the expression of transketolase I (TktA) and the second by blocking the native oxidation-decarboxylation reaction of E. coli by deleting the zwf gene from the chromosome (designated as JB/pTA and MZB, respectively). Decreases in the CO2 yield and the CO2 evolution per unit mole of ethanol production by at least 81% and 40% are observed. It is demonstrated in this study that the production of one mole of ethanol using E. coli strain MZB, the upper limit of CO2 emission is 0.052mol.

Computational protein design enables a novel one-carbon assimilation pathway

We describe a computationally designed enzyme, formolase (FLS), which catalyzes the carboligation of three one-carbon formaldehyde molecules into one three-carbon dihydroxyacetone molecule. The existence of FLS enables the design of a new carbon fixation pathway, the formolase pathway, consisting of a small number of thermodynamically favorable chemical transformations that convert formate into a three-carbon sugar in central metabolism. The formolase pathway is predicted to use carbon more efficiently and with less backward flux than any naturally occurring one-carbon assimilation pathway. When supplemented with enzymes carrying out the other steps in the pathway, FLS converts formate into dihydroxyacetone phosphate and other central metabolites in vitro. These results demonstrate how modern protein engineering and design tools can facilitate the construction of a completely new biosynthetic pathway.

Fluxome study of Pseudomonas fluorescens reveals major reorganisation of carbon flux through central metabolic pathways in response to inactivation of the anti-sigma factor MucA

Background

The bacterium Pseudomonas fluorescens switches to an alginate-producing phenotype when the pleiotropic anti-sigma factor MucA is inactivated. The inactivation is accompanied by an increased biomass yield on carbon sources when grown under nitrogen-limited chemostat conditions. A previous metabolome study showed significant changes in the intracellular metabolite concentrations, especially of the nucleotides, in mucA deletion mutants compared to the wild-type. In this study, the P. fluorescens SBW25 wild-type and an alginate non-producing mucA- ΔalgC double-knockout mutant are investigated through model-based ¹³C-metabolic flux analysis (¹³C-MFA) to explore the physiological consequences of MucA inactivation at the metabolic flux level. Intracellular metabolite extracts from three carbon labelling experiments using fructose as the sole carbon source are analysed for ¹³C-label incorporation in primary metabolites by gas and liquid chromatography tandem mass spectrometry.

Results

From mass isotopomer distribution datasets, absolute intracellular metabolic reaction rates for the wild type and the mutant are determined, revealing extensive reorganisation of carbon flux through central metabolic pathways in response to MucA inactivation. The carbon flux through the Entner-Doudoroff pathway was reduced in the mucA- ΔalgC mutant, while flux through the pentose phosphate pathway was increased. Our findings also indicated flexibility of the anaplerotic reactions through down-regulation of the pyruvate shunt in the mucA- ΔalgC mutant and up-regulation of the glyoxylate shunt.

Conclusions

Absolute metabolic fluxes and metabolite levels give detailed, integrated insight into the physiology of this industrially, medically and agriculturally important bacterial species and suggest that the most efficient way of using a mucA- mutant as a cell factory for alginate production would be to use non-growing conditions and nitrogen deprivation.

Electronic supplementary material

The online version of this article (doi:10.1186/s12918-015-0148-0) contains supplementary material, which is available to authorized users.

Metabolic engineering strategies for microbial synthesis of oleochemicals

Microbial synthesis of oleochemicals has advanced significantly in the last decade. Microbes have been engineered to convert renewable substrates to a wide range of molecules that are ordinarily made from plant oils. This approach is attractive because it can reduce a motivation for converting tropical rainforest into farmland while simultaneously enabling access to molecules that are currently expensive to produce from oil crops. In the last decade, enzymes responsible for producing oleochemicals in nature have been identified, strategies to circumvent native regulation have been developed, and high yielding strains have been designed, built, and successfully demonstrated. This review will describe the metabolic pathways that lead to the diverse molecular features found in natural oleochemicals, highlight successful metabolic engineering strategies, and comment on areas where future work could further advance the field.

Dynamic knockdown of E. coli central metabolism for redirecting fluxes of primary metabolites

Control of native enzyme levels is important when optimizing strains for overproduction of heterologous compounds. However, for many central metabolic enzymes, static knockdown results in poor growth and protein expression. We have developed a strategy for dynamically modulating the abundance of native enzymes within the host cell and applied this to a model system for myo-inositol production from glucose. This system relies on controlled degradation of a key glycolytic enzyme, phosphofructokinase-I (Pfk-I). Through tuning Pfk-I levels, we have been able to develop an Escherichia coli strain with a growth mode close to wild type and a production mode with an increased glucose-6-phosphate pool available for conversion into myo-inositol. The switch to production mode is trigged by inducer addition, allowing yield, titer, and productivity to be managed through induction time. By varying the time of Pfk-I degradation, we were able to achieve a two-fold improvement in yield and titers of myo-inositol.

Introducing an in situ capping strategy in systems biocatalysis to access 6-aminohexanoic acid

The combination of two cofactor self-sufficient biocatalytic cascade modules allowed the successful transformation of cyclohexanol into the nylon-6 monomer 6-aminohexanoic acid at the expense of only oxygen and ammonia. A hitherto unprecedented carboxylic acid capping strategy was introduced to minimize the formation of the dead-end intermediate 6-hydroxyhexanoic acid. For this purpose, the precursor ε-caprolactone was converted in aqueous medium in the presence of methanol into the corresponding methyl ester instead of the acid. Hence, it was shown for the first time that esterases--specifically horse liver esterase--can perform the selective ring-opening of ε-caprolactone with a clear preference for methanol over water as the nucleophile.

Improving industrial yeast strains: exploiting natural and artificial diversity

Yeasts have been used for thousands of years to make fermented foods and beverages, such as beer, wine, sake, and bread. However, the choice for a particular yeast strain or species for a specific industrial application is often based on historical, rather than scientific grounds. Moreover, new biotechnological yeast applications, such as the production of second-generation biofuels, confront yeast with environments and challenges that differ from those encountered in traditional food fermentations. Together, this implies that there are interesting opportunities to isolate or generate yeast variants that perform better than the currently used strains. Here, we discuss the different strategies of strain selection and improvement available for both conventional and nonconventional yeasts. Exploiting the existing natural diversity and using techniques such as mutagenesis, protoplast fusion, breeding, genome shuffling and directed evolution to generate artificial diversity, or the use of genetic modification strategies to alter traits in a more targeted way, have led to the selection of superior industrial yeasts. Furthermore, recent technological advances allowed the development of high-throughput techniques, such as 'global transcription machinery engineering' (gTME), to induce genetic variation, providing a new source of yeast genetic diversity.

Multivariate modular metabolic engineering for pathway and strain optimization

Despite the potential in utilizing microbial fermentation for chemical production, the field of industrial biotechnology still lacks a standard, universally applicable principle for strain optimization. A key challenge has been in finding and applying effective ways to address metabolic flux imbalances. Strategies based on rational design require significant a priori knowledge and often fail to take a holistic view of cellular metabolism. Combinatorial approaches enable more global searches but require a high-throughput screen. Here, we present the recent advances and promises of a novel approach to metabolic pathway and strain optimization called multivariate modular metabolic engineering (MMME). In this technique, key enzymes are organized into distinct modules and simultaneously varied based on expression to balance flux through a pathway. Because of its simplicity and broad applicability, MMME has the potential to systematize and revolutionize the field of metabolic engineering and industrial biotechnology.

Heterologous production of plant-derived isoprenoid products in microbes and the application of metabolic engineering and synthetic biology

The value associated with plant-derived products has spurred efforts to engineer new production routes. One such option is heterologous biosynthesis which requires reconstitution of a biosynthetic pathway in a host that provides both innate and developed cellular advantages relative to the native producer. This review will summarize success to date in heterologously producing plant-derived isoprenoid products when using hosts such as E. coli and yeast. The article will also address the significant challenges that face such efforts, the approaches that have been used to overcome obstacles, and the tools of metabolic engineering and synthetic biology being applied both in the course of establishing heterologous biosynthesis and optimizing final production metrics.

Challenges in industrial fermentation technology research

Industrial fermentation processes are increasingly popular, and are considered an important technological asset for reducing our dependence on chemicals and products produced from fossil fuels. However, despite their increasing popularity, fermentation processes have not yet reached the same maturity as traditional chemical processes, particularly when it comes to using engineering tools such as mathematical models and optimization techniques. This perspective starts with a brief overview of these engineering tools. However, the main focus is on a description of some of the most important engineering challenges: scaling up and scaling down fermentation processes, the influence of morphology on broth rheology and mass transfer, and establishing novel sensors to measure and control insightful process parameters. The greatest emphasis is on the challenges posed by filamentous fungi, because of their wide applications as cell factories and therefore their relevance in a White Biotechnology context. Computational fluid dynamics (CFD) is introduced as a promising tool that can be used to support the scaling up and scaling down of bioreactors, and for studying mixing and the potential occurrence of gradients in a tank.

After the feature presentation: technologies bridging untargeted metabolomics and biology

Liquid chromatography/mass spectrometry-based untargeted metabolomics is now an established experimental approach that is being broadly applied by many laboratories worldwide. Interpreting untargeted metabolomic data, however, remains a challenge and limits the translation of results into biologically relevant conclusions. Here we review emerging technologies that can be applied after untargeted profiling to extend biological interpretation of metabolomic data. These technologies include advances in bioinformatic software that enable identification of isotopes and adducts, comprehensive pathway mapping, deconvolution of MS(2) data, and tracking of isotopically labeled compounds. There are also opportunities to gain additional biological insight by complementing the metabolomic analysis of homogenized samples with recently developed technologies for metabolite imaging of intact tissues. To maximize the value of these emerging technologies, a unified workflow is discussed that builds on the traditional untargeted metabolomic pipeline. Particularly when integrated together, the combination of the advances highlighted in this review helps transform lists of masses and fold changes characteristic of untargeted profiling results into structures, absolute concentrations, pathway fluxes, and localization patterns that are typically needed to understand biology.

Transformable facultative thermophile Geobacillus stearothermophilus NUB3621 as a host strain for metabolic engineering

Metabolic engineers develop inexpensive enantioselective syntheses of high-value compounds, but their designs are sometimes confounded by the misfolding of heterologously expressed proteins. Geobacillus stearothermophilus NUB3621 is a readily transformable facultative thermophile. It could be used to express and properly fold proteins derived from its many mesophilic or thermophilic Bacillaceae relatives or to direct the evolution of thermophilic variants of mesophilic proteins. Moreover, its capacity for high-temperature growth should accelerate chemical transformation rates in accordance with the Arrhenius equation and reduce the risks of microbial contamination. Its tendency to sporulate in response to nutrient depletion lowers the costs of storage and transportation. Here, we present a draft genome sequence of G. stearothermophilus NUB3621 and describe inducible and constitutive expression plasmids that function in this organism. These tools will help us and others to exploit the natural advantages of this system for metabolic engineering applications.

Computer-aided design for metabolic engineering

The development and application of biotechnology-based strategies has had a great socio-economical impact and is likely to play a crucial role in the foundation of more sustainable and efficient industrial processes. Within biotechnology, metabolic engineering aims at the directed improvement of cellular properties, often with the goal of synthesizing a target chemical compound. The use of computer-aided design (CAD) tools, along with the continuously emerging advanced genetic engineering techniques have allowed metabolic engineering to broaden and streamline the process of heterologous compound-production. In this work, we review the CAD tools available for metabolic engineering with an emphasis, on retrosynthesis methodologies. Recent advances in genetic engineering strategies for pathway implementation and optimization are also reviewed as well as a range of bionalytical tools to validate in silico predictions. A case study applying retrosynthesis is presented as an experimental verification of the output from Retropath, the first complete automated computational pipeline applicable to metabolic engineering. Applying this CAD pipeline, together with genetic reassembly and optimization of culture conditions led to improved production of the plant flavonoid pinocembrin. Coupling CAD tools with advanced genetic engineering strategies and bioprocess optimization is crucial for enhanced product yields and will be of great value for the development of non-natural products through sustainable biotechnological processes.

Systems analysis of metabolic phenotypes: what have we learnt?

Flux is one of the most informative measures of metabolic behavior. Its estimation requires integration of experimental and modeling approaches and, thus, is at the heart of metabolic systems biology. In this review, we argue that flux analysis and modeling of a range of plant systems points to the importance of the supply of metabolic inputs and demand for metabolic end-products as key drivers of metabolic behavior. This has implications for metabolic engineering, and the use of in silico models will be important to help design more effective engineering strategies. We also consider the importance of cell type-specific metabolism and the challenges of characterizing metabolism at this resolution. A combination of new measurement technologies and modeling approaches is bringing us closer to integrating metabolic behavior with whole-plant physiology and growth.

Elucidation of intrinsic biosynthesis yields using 13C-based metabolism analysis

This paper discusses the use of 13C-based metabolism analysis for the assessment of intrinsic product yields - the actual carbon contribution from a single carbon substrate to the final product via a specific biosynthesis route - in the following four cases. First, undefined nutrients (such as yeast extract) in fermentation may contribute significantly to product synthesis, which can be quantified through an isotopic dilution method. Second, product and biomass synthesis may be dependent on the co-metabolism of multiple-carbon sources. 13C labeling experiments can track the fate of each carbon substrate in the cell metabolism and identify which substrate plays a main role in product synthesis. Third, 13C labeling can validate and quantify the contribution of the engineered pathway (versus the native pathway) to the product synthesis. Fourth, the loss of catabolic energy due to cell maintenance (energy used for functions other than production of new cell components) and low P/O ratio (Phosphate/Oxygen Ratio) significantly reduces product yields. Therefore, 13C-metabolic flux analysis is needed to assess the influence of suboptimal energy metabolism on microbial productivity, and determine how ATP/NAD(P)H are partitioned among various cellular functions. Since product yield is a major determining factor in the commercialization of a microbial cell factory, we foresee that 13C-isotopic labeling experiments, even without performing extensive flux calculations, can play a valuable role in the development and verification of microbial cell factories.