Biodegradation of silk biomaterials

Nature-derived materials for the fabrication of functional biodevices

Nature provides an incredible source of inspiration, structural concepts, and materials toward applications to improve the lives of people around the world, while preserving ecosystems, and addressing environmental sustainability. In particular, materials derived from animal and plant sources can provide low-cost, renewable building blocks for such applications. Nature-derived materials are of interest for their properties of biodegradability, bioconformability, biorecognition, self-repair, and stimuli response. While long used in tissue engineering and regenerative medicine, their use in functional devices such as (bio)electronics, sensors, and optical systems for healthcare and biomonitoring is finding increasing attention. The objective of this review is to cover the varied nature derived and sourced materials currently used in active biodevices and components that possess electrical or electronic behavior. We discuss materials ranging from proteins and polypeptides such as silk and collagen, polysaccharides including chitin and cellulose, to seaweed derived biomaterials, and DNA. These materials may be used as passive substrates or support architectures and often, as the functional elements either by themselves or as biocomposites. We further discuss natural pigments such as melanin and indigo that serve as active elements in devices. Increasingly, combinations of different biomaterials are being used to address the challenges of fabrication and performance in human monitoring or medicine. Finally, this review gives perspectives on the sourcing, processing, degradation, and biocompatibility of these materials. This rapidly growing multidisciplinary area of research will be advanced by a systematic understanding of nature-inspired materials and design concepts in (bio)electronic devices.

Cellulose for the effective decontamination of water pollution

The widespread industrialization, urbanization, and technological development have triggered the daily release of considerable amounts of pollutants, specifically in aquatic environments. Previous research and work-studies indicate the existence of defined properties, such as low cost, non-toxicity, biodegradability, reusability, and easy synthesis, preparation or extraction, which make a material an ideal agent for the remediation of water or the environment. Therefore, the scientific community has focused on the development and study of several novels, environmentally friendly, and cost-effective materials. Cellulose is the most abundant natural polymer encountered worldwide. Thereby, due to the unique biological properties that this biopolymer possesses, it has emerged as a potential candidate to replace synthetic materials for practical bioremediation of contaminated water. Furthermore, the presence of hydroxyl groups on its surface makes this biopolymer highly malleable, thus significantly enhancing its physicochemical properties by using a wide variety of functional groups and modification methods. The present review describes the different biopolymers useful for remediation of environmental pollution, explores in more detail the characteristics of cellulose and its promising applications in the decontamination of water pollution, and pays special attention to the removal of heavy metal ions, dyes, and hydrophobic organic compounds.

Manual Versus Microfluidic-Assisted Nanoparticle Manufacture: Impact of Silk Fibroin Stock on Nanoparticle Characteristics

Silk has a long track record of clinical use in the human body, and new formulations, including silk nanoparticles, continue to reveal the promise of this natural biopolymer for healthcare applications. Native silk fibroin can be isolated directly from the silk gland, but generating sufficient material for routine studies is difficult. Consequently, silk fibroin, typically extracted from cocoons, serves as the source for nanoparticle formation. This silk requires extensive processing (e.g., degumming, dissolution, etc.) to yield a hypoallergenic aqueous silk stock, but the impact of processing on nanoparticle production and characteristics is largely unknown. Here, manual and microfluidic-assisted silk nanoparticle manufacturing from 60- and 90-min degummed silk yielded consistent particle sizes (100.9-114.1 nm) with low polydispersity. However, the zeta potential was significantly lower (P < 0.05) for microfluidic-manufactured nanoparticles (-28 to -29 mV) than for manually produced nanoparticles (-39 to -43 mV). Molecular weight analysis showed a nanoparticle composition similar to that of the silk fibroin starting stock. Reducing the molecular weight of silk fibroin reduced the particle size for degumming times ≤30 min, whereas increasing the molecular weight polydispersity improved the nanoparticle homogeneity. Prolonged degumming (>30 min) had no significant effect on particle attributes. Overall, the results showed that silk fibroin processing directly impacts nanoparticle characteristics.

Enzymatic Degradation of Bombyx mori Silk Materials: A Review

As a biomaterial, silk presents unique features with a combination of excellent mechanical properties, biocompatibility, and biodegradability. The biodegradability aspects of silk biomaterials, especially with options to control the rate from short (days) to long (years) time frames in vivo, make this protein-based biopolymer a good candidate for developing biodegradable devices used for tissue repairs and tissue engineering, as well as medical device implants. Silk materials, including native silk fibers and a broad spectrum of regenerated silk materials, have been investigated in vitro and in vivo to demonstrate degradation by proteolytic enzymes. In this Review, we summarize the findings on these studies on the enzymatic degradation of Bombyx mori (B. mori) silk materials. We also present a discussion on the factors that dictate the degradation properties of silk materials. Finally, in future perspectives, we highlight some key challenges and potential directions toward the future study of the degradation of silk materials.

Crosslinked Fibroin Nanoparticles: Investigations on Biostability, Cytotoxicity, and Cellular Internalization

Recently, crosslinked fibroin nanoparticles (FNP) using the crosslinker 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) or the polymer poly(ethylenimine) (PEI) have been developed and showed potentials as novel drug delivery systems. Thus, this study further investigated the biological properties of these crosslinked FNP by labeling them with fluorescein isothiocyanate (FITC) for in vitro studies. All formulations possessed a mean particle size of approximately 300 nm and a tunable zeta potential (-20 to + 30 mV) dependent on the amount/type of crosslinkers. The FITC-bound FNP showed no significant difference in physical properties compared to the blank FNP. They possessed a binding efficacy of 3.3% w/w, and no FITC was released in sink condition up to 8 h. All formulations were colloidal stable in the sheep whole blood. The degradation rate of these FNP in blood could be controlled depending on their crosslink degree. Moreover, no potential toxicity in erythrocytes, Caco-2, HepG2, and 9L cells was noted for all formulations at particle concentrations of < 1 mg/mL. Finally, all FNP were internalized into the Caco-2 cells after 3 h incubation. The uptake rate of the positively charged particles was significantly higher than the negatively charged ones. In summary, the crosslinked FNP were safe and showed high potentials as versatile systems for biomedical applications.

Electroceutical Silk-Silver Gel to Eradicate Bacterial Infection

With more than 50% of bacteria resistant to standard antibiotics, new strategies to treat bacterial infection and colonization are needed. Based on the concept of targeting the bacteria synergistically on various fronts, it is hypothesized that an electrical insult associated with antibacterial materials may be a highly effective means of killing bacteria. In this work, an injectable conductive gel based on silk fibroin (SF) and silver nanoparticles (Ag-NPs) is synthesized, capable of coating a zone of injury, allowing the application of a low electrical current to decrease bacterial contamination. With a high conductivity of 1.5 S cm^-1 , SF/Ag-NPs gels killed 80% of Escherichia coli in 1 min, no toxicity toward Chinese hamster ovary cells is observed. The mechanism of an electrical composite gel combined with electrical wound therapy is associated with silver ion (Ag⁺ ) release, and reactive oxygen species (ROS) production. The findings in the present study show a similar Ag⁺ release for treatment with gels and the combined effect, whereas ROS generation is 50% higher when a small electrical current is applied leading to a broad bactericidal effect.

Bioresorbable silk grafts for small diameter vascular tissue engineering applications: In vitro and in vivo functional analysis

The success of tissue-engineered vascular graft (TEVG) predominantly relies on the selection of a suitable biomaterial and graft design. Natural biopolymer silk has shown great promise for various tissue-engineering applications. This study is the first to investigate Indian endemic non-mulberry silk (Antheraea assama-AA) - which inherits naturally superior mechanical and biological traits (e.g., RGD motifs) compared to Bombyx mori-BM silk, for TEVG applications. We designed bi-layered biomimetic small diameter AA-BM silk TEVGs adopting a new fabrication methodology. The inner layer showed ideally sized (~40 µm) pores with interconnectivity to allow cellular infiltration, and an outer dense electrospun layer that confers mechanical resilience. Biodegradation of silk TEVGs into amino acids as resorbable byproducts corroborates their in vivo remodeling ability. Following our previous reports, we surgically implanted human adipose tissue-derived stromal vascular fraction (SVF) seeded silk TEVGs in Lewis rats as abdominal aortic interposition grafts for 8 weeks. Adequate suture retention strength (0.45 ± 0.1 N) without any blood seepage post-implantation substantiate the grafts' viability. AA silk-based TEVGs showed superior animal survival and graft patency compared to BM silk TEVGs. Histological analysis revealed neo-tissue formation, host cell infiltration and graft remodeling in terms of extracellular matrix turnover. Altogether, this study demonstrates promising aspects of AA silk TEVGs for vascular tissue engineering applications. STATEMENT OF SIGNIFICANCE: Clinical 'off the shelf' implementation of tissue-engineered vascular grafts (TEVGs) remains a challenge. Achieving optimal blood vessel regeneration requires the use of bioresorbable materials having suitable degradation rates while producing minimal or no toxic byproducts. Host cell recruitment and preventing acute thrombosis are other pre-requisites for successful graft remodeling. In this study, for the first time we explored the use of naturally derived Indian endemic non-mulberry Antheraea assama silk in combination with Bombyx mori silk for TEVG applications by adopting a new biomimetic approach. Our bi-layered silk TEVGs were optimally porous, mechanically resilient and biodegradable. In vivo implantation in rat aorta showed long-term patency and graft remodeling by host cell infiltration and extracellular matrix deposition corroborating their clinical feasibility.

Effect of process parameters on additive-free electrospinning of regenerated silk fibroin nonwovens

Silk fibroin is a biomaterial with multiple beneficial properties for use in regenerative medicine and tissue engineering. When dissolving and processing the reconstituted silk fibroin solution by electrospinning, the arrangement and size of fibers can be manifold varied and according fiber diameters reduced to the nanometer range. Such nonwovens show high porosity as well as potential biocompatibility. Usually, electrospinning of most biomaterials demands for the application of additives, which enable stable electrospinning by adjusting viscosity, and are intended to evaporate during processing or to be washed out afterwards. However, the use of such additives increases costs and has to be taken into account in terms of biological risks when used for biomedical applications.

In this study, we explored the possibilities of additive-free electrospinning of pure fibroin nonwovens and tried to optimize process parameters to enable stable processing. We used natural silk derived from the mulberry silkworm Bombyx mori. After degumming, the silk fibroin was dissolved and the viscosity of the spinning solution was controlled by partial evaporation of the initial solving agent. This way, we were able to completely avoid the use of additives and manufacture nonwovens, which potentially offer higher biocompatibility and reduced immunogenicity. Temperature and relative humidity during electrospinning were systematically varied (25–35 °C, 25–30% RH). In a second step, the nonwovens optionally underwent methanol treatment to initiate beta-sheet formation in order to increase structural integrity and strength. Comprehensive surface analysis on the different nonwovens was performed using scanning electron microscopy and supplemented by additional mechanical testing. Cytotoxicity was evaluated using BrdU-assay, XTT-assay, LDH-assay and live-dead staining. Our findings were, that an increase of temperature and relative humidity led to unequal fiber diameters and defective nonwovens. Resistance to penetration decreased accordingly. The most uniform fiber diameters of 998 ± 63 nm were obtained at 30 °C and 25% relative humidity, also showing the highest value for resistance to penetration (0.20 N). The according pure fibroin nonwoven also showed no signs of cytotoxicity. However, while the biological response showed statistical evidence, the material characteristics showed no statistically significant correlation to changes of the ambient conditions within the investigated ranges. We suggest that further experiments should explore additional ranges for temperature and humidity and further focus on the repeatability of material properties in dependency of suitable process windows.

•

Usually, electrospinning of most biomaterials demands for the application of additives. However, the use of such additives increases costs and has to be taken into account in terms of biological risks.

•

After degumming, fibroin was dissolved and the viscosity of the spinning solution was controlled by partial evaporation of the initial solving agent. In this way, we were able to completely avoid the use of additives.

•

Using a pure fibroin solution contributes to higher biocompatibility and reduces immunogenicity of the products.

•

Increase of temperature and humidity led to unequal fiber diameters and defective nonwovens. The most uniform fiber diameters of 998 ± 63 nm were obtained at 30 °C and 25% RH.

Rapid Photocrosslinking of Silk Hydrogels with High Cell Density and Enhanced Shape Fidelity

Silk fibroin hydrogels crosslinked through di-tyrosine bonds are clear, elastomeric constructs with immense potential in regenerative medicine applications. In this study, demonstrated is a new visible light-mediated photoredox system for di-tyrosine bond formation in silk fibroin that overcomes major limitations of current conventional enzymatic-based crosslinking. This photomediated system rapidly crosslinks silk fibroin (<1 min), allowing encapsulation of cells at significantly higher cell densities (15 million cells mL^-1 ) while retaining high cell viability (>80%). The photocrosslinked silk hydrogels present more stable mechanical properties which do not undergo spontaneous transition to stiff, β-sheet-rich networks typically seen for enzymatically crosslinked systems. These hydrogels also support long-term culture of human articular chondrocytes, with excellent cartilage tissue formation. This system also facilitates the first demonstration of biofabrication of silk fibroin constructs in the absence of chemical modification of the protein structure or rheological additives. Cell-laden constructs with complex, ordered, graduated architectures, and high resolution (40 µm) are fabricated using the photocrosslinking system, which cannot be achieved using the enzymatic crosslinking system. Taken together, this work demonstrates the immense potential of a new crosslinking approach for fabrication of elastomeric silk hydrogels with applications in biofabrication and tissue regeneration.

Degradable Piezoelectric Biomaterials for Wearable and Implantable Bioelectronics

Current bioelectronics are facing a paradigm shift from old-fashioned unrecyclable materials to green and degradable functional materials with desired biocompatibility. As an essential electromechanical coupling component in many bioelectronics, new piezoelectric materials are being developed with biodegradability, as well as desired mechanical and electromechanical properties for the next generation implantable and wearable bioelectronics. In this review, we provide an overview of the major advancements in biodegradable piezoelectric materials. Different natural (such as peptide, amino acids, proteins, cellulose, chitin, silk, collagen, and M13 phage) and synthetic piezoelectric materials (such as polylactic acid) are discussed to reveal the underlying electromechanical coupling mechanism at the molecular level, together with typical approaches to the alignment of orientation and polarization to boost their electromechanical performance. Meanwhile, in vivo and in vitro degradation manners of those piezoelectric materials are summarized and compared. Representative developments of typical electronic prototypes leveraging these materials are also discussed. At last, challenges toward practical applications are pointed out together with potential research opportunities that might be critical in this new materials research area.

Bioresorbable Materials on the Rise: From Electronic Components and Physical Sensors to In Vivo Monitoring Systems

Over the last decade, scientists have dreamed about the development of a bioresorbable technology that exploits a new class of electrical, optical, and sensing components able to operate in physiological conditions for a prescribed time and then disappear, being made of materials that fully dissolve in vivo with biologically benign byproducts upon external stimulation. The final goal is to engineer these components into transient implantable systems that directly interact with organs, tissues, and biofluids in real-time, retrieve clinical parameters, and provide therapeutic actions tailored to the disease and patient clinical evolution, and then biodegrade without the need for device-retrieving surgery that may cause tissue lesion or infection. Here, the major results achieved in bioresorbable technology are critically reviewed, with a bottom-up approach that starts from a rational analysis of dissolution chemistry and kinetics, and biocompatibility of bioresorbable materials, then moves to in vivo performance and stability of electrical and optical bioresorbable components, and eventually focuses on the integration of such components into bioresorbable systems for clinically relevant applications. Finally, the technology readiness levels (TRLs) achieved for the different bioresorbable devices and systems are assessed, hence the open challenges are analyzed and future directions for advancing the technology are envisaged.

Silk biomaterials in wound healing and skin regeneration therapeutics: From bench to bedside

Silk biomaterials are known for biomedical and tissue engineering applications including drug delivery and implantable devices owing to their biocompatible and a wide range of ideal physico-chemical properties. Herein, we present a critical overview of the progress of silk-based matrices in skin regeneration therapeutics with an emphasis on recent innovations and scientific findings. Beginning with a brief description of numerous varieties of silks, the review summarizes our current understanding of the biological properties of silk that help in the wound healing process. Various silk varieties such as silkworm silk fibroin, silk sericin, native spider silk and recombinant silk materials have been explored for cutaneous wound healing applications from the past few decades. With an aim to harness the regenerative properties of silk, numerous strategies have been applied to develop functional bioactive wound dressings and viable bio-artificial skin grafts in recent times. The review examines multiple inherent properties of silk that aid in the critical events of the healing process such as cell migration, cell proliferation, angiogenesis, and re-epithelialization. A detailed insight into the progress of silk-based cellular skin grafts is also provided that discusses various co-culture strategies and development of bilayer and tri-layer human skin equivalent under in vitro conditions. In addition, functionalized silk matrices loaded with bioactive molecules and antibacterial compounds are discussed, which have shown great potential in treating hard-to-heal wounds. Finally, clinical studies performed using silk-based translational products are reviewed that validate their regenerative properties and future applications in this area. STATEMENT OF SIGNIFICANCE: The review article discusses the recent advances in silk-based technologies for wound healing applications, covering various types of silk biomaterials and their properties suitable for wound repair and regeneration. The article demonstrates the progress of silk-based matrices with an update on the patented technologies and clinical advancements over the years. The rationale behind this review is to highlight numerous properties of silk biomaterials that aid in all the critical events of the wound healing process towards skin regeneration. Functionalization strategies to fabricate silk dressings containing bioactive molecules and antimicrobial compounds for drug delivery to the wound bed are discussed. In addition, a separate section describes the approaches taken to generate living human skin equivalent that have recently contributed in the field of skin tissue engineering.

Edible unclonable functions

Counterfeit medicines are a fundamental security problem. Counterfeiting medication poses a tremendous threat to patient safety, public health, and the economy in developed and less developed countries. Current solutions are often vulnerable due to the limited security levels. We propose that the highest protection against counterfeit medicines would be a combination of a physically unclonable function (PUF) with on-dose authentication. A PUF can provide a digital fingerprint with multiple pairs of input challenges and output responses. On-dose authentication can verify every individual pill without removing the identification tag. Here, we report on-dose PUFs that can be directly attached onto the surface of medicines, be swallowed, and digested. Fluorescent proteins and silk proteins serve as edible photonic biomaterials and the photoluminescent properties provide parametric support of challenge-response pairs. Such edible cryptographic primitives can play an important role in pharmaceutical anti-counterfeiting and other security applications requiring immediate destruction or vanishing features.

Cervical Augmentation with an Injectable Silk-Based Gel: Biocompatibility in a Rat Model of Pregnancy

The aim of this study was to study the biocompatibility of an injectable silk gel in the cervix in a rat model of pregnancy. The rationale is to study an injectable gel as an alternate treatment for cervical insufficiency. We further aimed to perform cervical injections via a vaginal route to mimic the clinical procedure of a cervical cerclage. We performed an in vivo study in pregnant female Sprague Dawley rats. Cervical procedures were performed using a customized speculum under general anesthesia. Injections were performed on gestational day 16. The responses to silk gel injections were compared to polyethylene terephthalate suture and saline controls on gestational day 19 and postpartum. The inflammatory response was evaluated by histology, PCR for inflammatory gene expression, and ELISA for protein levels of proinflammatory mediators. Silk gel injections were performed on 13 animals. All animals tolerated the procedure. Silk gel occupied 5% of the stroma after injection. Injected silk gel caused neither preterm birth nor prolonged pregnancy and had no effect on the kits. When comparing inflammatory responses, expression of inflammatory genes and proinflammatory proteins in the silk gel group was intermediate between saline (lowest) and cerclage suture (highest). Injectable silk gel was more inflammatory compared to saline injections but less inflammatory compared to the suture material used for cervical cerclage. This study is an important step toward development of an alternative treatment for cervical insufficiency.

Silk fibroin for skin injury repair: Where do things stand?

Several synthetic and natural materials are used in soft tissue engineering and regenerative medicine with varying degrees of success. Among them, silkworm silk protein fibroin, a naturally occurring protein-based biomaterial, exhibits many promising characteristics such as biocompatibility, controllable biodegradability, tunable mechanical properties, aqueous preparation, minimal inflammation in host tissue, low cost and ease of use. Silk fibroin is often used alone or in combination with other materials in various formats and is also a promising delivery system for bioactive compounds as part of such repair scenarios. These properties make silk fibroin an excellent biomaterial for skin tissue engineering and repair applications. This review focuses on the promising characteristics and recent advances in the use of silk fibroin for skin wound healing and/or soft-tissue repair applications. The benefits and limitations of silk fibroin as a scaffolding biomaterial in this context are also discussed. STATEMENT OF SIGNIFICANCE: Silk protein fibroin is a natural biomaterial with important biological and mechanical properties for soft tissue engineering applications. Silk fibroin is obtained from silkworms and can be purified using alkali or enzyme based degumming (removal of glue protein sericin) procedures. Fibroin is used alone or in combination with other materials in different scaffold forms, such as nanofibrous mats, hydrogels, sponges or films tailored for specific applications. The investigations carried out using silk fibroin or its blends in skin tissue engineering have increased dramatically in recent years due to the advantages of this unique biomaterial. This review focuses on the promising characteristics of silk fibroin for skin wound healing and/or soft-tissue repair applications.

Protein and Polysaccharide-Based Magnetic Composite Materials for Medical Applications

The combination of protein and polysaccharides with magnetic materials has been implemented in biomedical applications for decades. Proteins such as silk, collagen, and elastin and polysaccharides such as chitosan, cellulose, and alginate have been heavily used in composite biomaterials. The wide diversity in the structure of the materials including their primary monomer/amino acid sequences allow for tunable properties. Various types of these composites are highly regarded due to their biocompatible, thermal, and mechanical properties while retaining their biological characteristics. This review provides information on protein and polysaccharide materials combined with magnetic elements in the biomedical space showcasing the materials used, fabrication methods, and their subsequent applications in biomedical research.

Silk Fibroin-Based Biomaterials for Biomedical Applications: A Review

Since it was first discovered, thousands of years ago, silkworm silk has been known to be an abundant biopolymer with a vast range of attractive properties. The utilization of silk fibroin (SF), the main protein of silkworm silk, has not been limited to the textile industry but has been further extended to various high-tech application areas, including biomaterials for drug delivery systems and tissue engineering. The outstanding mechanical properties of SF, including its facile processability, superior biocompatibility, controllable biodegradation, and versatile functionalization have allowed its use for innovative applications. In this review, we describe the structure, composition, general properties, and structure-properties relationship of SF. In addition, the methods used for the fabrication and modification of various materials are briefly addressed. Lastly, recent applications of SF-based materials for small molecule drug delivery, biological drug delivery, gene therapy, wound healing, and bone regeneration are reviewed and our perspectives on future development of these favorable materials are also shared.

Silk fibroin/sodium alginate composite porous materials with controllable degradation

In this study, silk fibroin (SF)/sodium alginate (SA) porous materials (PMs) with different blend ratios were generated using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) as crosslinking agent by a simple freeze-dried method. Degradation experiment of SF/SA PMs have been systematically investigated up to 18 days in Collagenase IA solution at 37 °C, Phosphate buffer saline (PBS) solution without enzyme was used as a control. The results showed SF/SA 50/50 PMs exhibited a lowest rate of weight loss, about 68% of the weight retained within 18 d in Collagenase IA solution. SEM images indicated Collagenase IA can degrade fibroin leading to collapse of the pure SF PMs, while SF/SA 50/50 PMs still possessed integrity of pore structure during enzyme degradation with increasing exposure time. The crystalline structure of the SF in the SF/SA PMs changed to silk II after degradation for 18 d. Furthermore, the results of the in vivo degradation by subcutaneous implantation in rats showed that all PMs can be degraded at different levels, and exhibited good subcutaneous histocompatibility to the host animals. The degradability was strongly correlated to the blend ratios in a series of SF/SA composite PMs, and insights gained in this study can serve as a guide to match desired degradation behavior with specific applications for the SF/SA composite PMs.

Injectable Silk-Based Hydrogel as an Alternative to Cervical Cerclage: A Rabbit Study

Background: Preterm birth is a common cause of morbidity and mortality in newborn infants. Cervical insufficiency (CI) is a significant cause of preterm birth. The treatment for CI is cerclage, which is a suture placed around the cervix to provide mechanical support. Cerclage, however, is associated with limited efficacy. Here we present an injectable, silk-based hydrogel as an alternative to cerclage. Objective: Pregnant rabbits were used as an animal model of pregnancy to study the mechanical properties, biocompatibility, and degradation of the hydrogel after cervical injection. Study Design: Silk hydrogel (200 μL volume) was injected into the cervix. Controls were either injected with saline or treated with cerclage (5-0 polyethylene terephthalate suture). To study the effect on mechanical properties, the cervix was tested in compression. Biodegradation of the hydrogel was followed over 6 weeks. For biocompatibility, expression levels of proinflammatory mediators were studied. Results: Hydrogel injection resulted in significant tissue augmentation-the cross-sectional area of the cervix increased 46.3 ± 3.0%. The modulus of the uninjected and hydrogel-injected tissues was 3.3 ± 0.7 and 3.2 ± 0.5 kPa at 5-10% strain, respectively (p = 0.8). Histology showed a mild inflammatory response surrounding the hydrogel. Biodegradation of the hydrogel showed 70% volume loss over 6 weeks. Hydrogel-injected tissue showed similar inflammatory response compared with cerclage. Conclusions: In pregnant rabbits, cervical injection of the silk-based hydrogel was biocompatible and naturally degraded. No adverse effects on timing of delivery and pup viability were seen. Silk-based hydrogels show promise for tissue augmentation during pregnancy. Impact Statement This research describes the use of injectable silk-based hydrogel for augmenting cervical tissue in vivo in a pregnant rabbit model. Further preclinical development of the methods and insights described in this article can lead to therapeutic use of this hydrogel as an alternative to cerclage in preterm birth due to cervical insufficiency.

Antimicrobial coating of spider silk to prevent bacterial attachment on silk surgical sutures

Microbial infections from post-surgery or other medical-related procedure is a serious health problem. Nowadays, the research is focused on the development of new drug-free materials with antibacterial properties to prevent or minimize the risk of infections. Spider silk is known for its unique biomechanical properties allied with biocompatibility. Recombinant DNA technology allows to bioengineering spider silk with antimicrobial peptides (AMP). Thus, our goal was to bioengineered spider silk proteins with AMP (6mer-HNP1) as an antibacterial drug-free coating for commercial silk sutures (Perma-Hand®) for decreasing bacterial infections. Perma-Hand® sutures were coated with 6mer-HNP1 by dip coating. In vitro tests, using human fetal lung fibroblasts (MRC5), showed that coated sutures sustained cell viability, and also, the contact with red blood cells (RBCs) demonstrate blood compatibility. Also, the coatings inhibited significantly the adherence and formation of biofilm, where sutures coated with 6mer-HNP1 produced a 1.5 log reduction of Methicillin-Resistant Staphylococcus aureus (MRSA) and a 2 log reduction of Escherichia coli (E. coli) compared to the uncoated Perma-Hand® suture. The mechanical properties of Perma-Hand® sutures were not affected by the presence of bioengineered spider silk proteins. Thus, the present work demonstrated that using spider silk drug-free coatings it is possible to improve the antibacterial properties of the commercial sutures. Furthermore, a new class of drug-free sutures for reducing post-implantation infections can be developed. STATEMENT OF SIGNIFICANCE: Microbial infections from post-surgery or other medical-related procedure is a serious health problem. Developing new drug-free materials with antibacterial properties is an approach to prevent or minimize the risk of infections. Spider silk is known for its unique biomechanical properties allied with biocompatibility. Recombinant DNA technology allow to bioengineering spider silk with antimicrobial peptides (AMP). Our goal is bioengineered spider silk proteins with AMP as an antibacterial coating for silk sutures. The coatings showed exceptional antibacterial properties and maintained intrinsic mechanical features. In vitro studies showed a positive effect of the coated sutures on the cell behavior. With this new drug-free bioengineered spider silk coating is possible to develop a new class of drug-free sutures for reducing post-implantation infections.

Evolutionary approaches in protein engineering towards biomaterial construction

The tailoring of proteins for specific applications by evolutionary methods is a highly active area of research. Rational design and directed evolution are the two main strategies to reengineer proteins or create chimeric structures. Rational engineering is often limited by insufficient knowledge about proteins' structure-function relationships; directed evolution overcomes this restriction but poses challenges in the screening of candidates. A combination of these protein engineering approaches will allow us to create protein variants with a wide range of desired properties. Herein, we focus on the application of these approaches towards the generation of protein biomaterials that are known for biodegradability, biocompatibility and biofunctionality, from combinations of natural, synthetic, or engineered proteins and protein domains. Potential applications depend on the enhancement of biofunctional, mechanical, or other desired properties. Examples include scaffolds for tissue engineering, thermostable enzymes for industrial biocatalysis, and other therapeutic applications.

Silk Hydrogels Crosslinked by the Fenton Reaction

Here, the Fenton reaction is used to prepare silk hydrogels through oxidation of tyrosine residues in silk fibroin, leading to dityrosine crosslinking. At pH 5.7, gelation occurs rapidly within 30 s, and the resultant opaque gels show soft properties with a storage modulus of ≈100 Pa. The addition of ascorbic acid to the Fenton reaction increases the dityrosine bonds in the hydrogels but has little effect on the rheological or mechanical properties. The results indicate that Fe(III) ions significantly interacted with silk fibroin during the Fenton reaction, most likely binding to sites such as tyrosine, glutamate, and aspartate residues, triggering the formation of β-sheet structures that may impede dityrosine bond formation due to steric hindrance. The use of an iron chelator or the operation of the Fenton reaction at pH 9.2 enables control over the interaction of Fe(III) ions with silk fibroin, achieving a hydrogel with improved optical properties and enhanced dityrosine bond formation. Hydrogels prepared by the Fenton reaction are cytocompatible as L929 mouse fibroblasts remain viable and are proliferative when seeded on the hydrogels. The results offer a useful approach to generate chemically crosslinked silk fibroin hydrogels without the use of enzyme-catalyzed reactions for biomedical applications.

Cellular uptake, intracellular distribution and degradation of Her2-targeting silk nanospheres

BACKGROUND

The development of nanocarrier technology has attracted great interest in the last decade. Biodegradable spheres made of functionalized silk have considerable potential to be used as drug delivery systems for cancer treatment. A targeting ligand displayed at the surface of a carrier, with a specific affinity towards a particular receptor, can further enhance the accumulation and uptake of nanoparticles at the site of a tumor.

MATERIALS AND METHODS

The hybrid constructs were obtained by adding a Her2-binding peptide (H2.1) to MS1 and MS2 bioengineered silks based on the MaSp1 and MaSp2 proteins from N. clavipes, respectively. The H2.1MS1 and H2.1MS2 proteins were blended at a weight ratio of 8:2. Stable silk particles were formed by mixing a soluble protein with potassium phosphate using a micromixing technique. We used specific inhibitors of endocytosis to determine the cellular uptake pathway of the silk nanoparticles in human Her2-positive breast cancer cells. The subcellular distribution of silk particles was investigated by evaluating the signal colocalization with organelle-specific tracker. Moreover, lysosomal and exosomal inhibitors were implemented to evaluate their impact on the silk spheres behavior and degradation.

RESULTS

The functionalized spheres were specifically taken up by Her2-positive cancer cells. Silk particles facilitated the entry into cells through both the clathrin- and caveola-dependent pathways of endocytosis. Upon entering the cells, the particles accumulated in the lysosomes, where intracellular degradation occurred.

CONCLUSIONS

The present study demonstrated directly that the lysosomal function was essential for silk-based carrier elimination. The degradation of the carrier is of great importance to develop an optimal drug delivery system.

The advances in nerve tissue engineering: From fabrication of nerve conduit to in vivo nerve regeneration assays

Peripheral nerve damage is a common clinical complication of traumatic injury occurring after accident, tumorous outgrowth, or surgical side effects. Although the new methods and biomaterials have been improved recently, regeneration of peripheral nerve gaps is still a challenge. These injuries affect the quality of life of the patients negatively. In the recent years, many efforts have been made to develop innovative nerve tissue engineering approaches aiming to improve peripheral nerve treatment following nerve injuries. Herein, we will not only outline what we know about the peripheral nerve regeneration but also offer our insight regarding the types of nerve conduits, their fabrication process, and factors associated with conduits as well as types of animal and nerve models for evaluating conduit function. Finally, nerve regeneration in a rat sciatic nerve injury model by nerve conduits has been considered, and the main aspects that may affect the preclinical outcome have been discussed.

Utilizing Recombinant Spider Silk Proteins To Develop a Synthetic Bruch's Membrane for Modeling the Retinal Pigment Epithelium

Spider silks are intriguing biomaterials that have a high potential as innovative biomedical processes and devices. The intent of this study was to evaluate the capacity of recombinant spider silk proteins (rSSps) as a synthetic Bruch's membrane. Nonporous silk membranes were prepared with comparable thicknesses (<10 μm) to that of native Bruch's membrane. Biomechanical characterization was performed prior to seeding cells. The ability of RPE cells (ARPE-19) to attach and grow on the membranes was then evaluated with bright-field and electron microscopy, intracellular DNA quantification, and immunocytochemical staining (ZO-1 and F-actin). Controls were cultured on permeable Transwell support membranes and characterized with the same methods. A size-dependent permeability assay, using FITC-dextran, was used to determine cell-membrane barrier function. Compared to Transwell controls, RPE cells cultured on rSSps membranes developed more native-like "cobblestone" morphologies, exhibited higher intracellular DNA content, and expressed key organizational proteins more consistently. Comparisons of the membranes to native structures revealed that the silk membranes exhibited equivalent thicknesses, biomechanical properties, and barrier functions. These findings support the use of recombinant spider silk proteins to model Bruch's membrane and develop more biomimetic retinal models.

Properties of interpenetrating polymer networks associating fibrin and silk fibroin networks obtained by a double enzymatic method

Fibrin gels are of interest as biomaterials for regenerative medicine but present poor mechanical properties, undergo fast degradation and strongly contract in presence of cells. To face these drawbacks, a fibrin network can be associated with another polymer network, in an Interpenetrating Polymer Network (IPN) architecture. In this study, we report the properties of an IPN comprising a fibrin (Fb) network and a silk fibroin (SF) network. This IPN is synthesized through the action of 2 enzymes, each one being specific of one protein gelation, i.e. thrombin (Tb) for Fb gelation, and horseradish peroxidase (HRP) for SF gelation. The effective formation of both Fb and SF networks in an IPN architecture was first verified at qualitative and quantitative levels. The resulting IPN was easily manipulable, displayed high viscoelastic properties and showed homogeneous macro- and micro-structure. Then the degradability of the IPN by two proteases, thermolysin (TL) and trypsin (TRY), obeying different mechanisms was presented. Finally, two-dimensional culture of human fibroblasts on the IPN surface induced little material contraction, while fibroblasts showed healthy morphology, displayed high viability and produced mature extracellular matrix (ECM) proteins. Taken together, the results suggest that this new IPN have a strong potential for tissue engineering and regenerative medicine.

Fabricated tropoelastin-silk yarns and woven textiles for diverse tissue engineering applications

Electrospun yarns offer substantial opportunities for the fabrication of elastic scaffolds for flexible tissue engineering applications. Currently available yarns are predominantly made of synthetic elastic materials. Thus scaffolds made from these yarns typically lack cell signaling cues. This can result in poor integration or even rejection on implantation, which drive demands for a new generation of yarns made from natural biologically compatible materials. Here, we present a new type of cell-attractive, highly twisted protein-based yarns made from blended tropoelastin and silk fibroin. These yarns combine physical and biological benefits by being rendered elastic and bioactive through the incorporation of tropoelastin and strengthened through the presence of silk fibroin. Remarkably, the process delivered multi-meter long yarns of tropoelastin-silk mixture that were conducive to fabrication of meshes on hand-made frames. The resulting hydrated meshes are elastic and cell interactive. Furthermore, subcutaneous implantation of the meshes in mice demonstrates their tolerance and persistence over 8 weeks. This combination of mechanical properties, biocompatibility and processability into diverse shapes and patterns underscores the value of these materials and platform technology for tissue engineering applications. STATEMENT OF SIGNIFICANCE: Synthetic yarns are used to fabricate textile materials for various applications such as surgical meshes for hernia repair and pelvic organ prolapse. However, synthetic materials lack the attractive biological and physical cues characteristic of extracellular matrix and there is a demand for materials that can minimize postoperative complications. To address this need, we made yarns from a combination of recombinant human tropoelastin and silk fibroin using a modified electrospinning approach that blended these proteins into functional yarns. Prior to this study, no protein-based yarns using tropoelastin were available for the fabrication of functional textile materials. Multimeter-long, uniform and highly twisted yarns based on these proteins were elastic and cell interactive and demonstrated processing to yield textile fabrics. By using these yarns to weave fabrics, we demonstrate that an elastic human matrix protein blend can deliver a versatile platform technology to make textiles that can be explored for efficacy in tissue repair.

Production and Characterization of Porous Fibroin Scaffolds for Regenerative Medical Application

BACKGROUND/AIM

Silk is a natural biomaterial with several superior features for applications in regenerative medicine. In the present study an optimized process for manufacturing porous scaffolds out of the silk protein fibroin was developed.

MATERIALS AND METHODS

The silk protein fibroin was dissolved in Ajisawa's reagent and the resulting fibroin solution was used to produce scaffolds by means of freeze-thawing cycling. Porosity, pressure and stab resistance as well as degradation behavior were assessed in order to characterize the physical properties of the resulting scaffolds.

RESULTS

The resulting sponge-like fibroin scaffolds were highly porous while the porosity correlated inversely with the concentration of the starting fibroin solution. Increased initial fibroin concentrations of the scaffolds resulted in increased compressive and cannulation resistance. The majority of the fibroin scaffolds were digested by 1 mg/ml protease XIV in 3 weeks, indicating their biodegradability.

CONCLUSION

The production of scaffolds made of varying fibroin concentrations by means of freeze-thawing, following dissolution using Ajisawa's reagent, provides a simple and straightforward strategy for adjusting the physical and chemical properties of fibroin scaffolds for various medical applications.

Biomaterials to Mimic and Heal Connective Tissues

Connective tissue is one of the four major types of animal tissue and plays essential roles throughout the human body. Genetic factors, aging, and trauma all contribute to connective tissue dysfunction and motivate the need for strategies to promote healing and regeneration. The goal here is to link a fundamental understanding of connective tissues and their multiscale properties to better inform the design and translation of novel biomaterials to promote their regeneration. Major clinical problems in adipose tissue, cartilage, dermis, and tendon are discussed that inspire the need to replace native connective tissue with biomaterials. Then, multiscale structure-function relationships in native soft connective tissues that may be used to guide material design are detailed. Several biomaterials strategies to improve healing of these tissues that incorporate biologics and are biologic-free are reviewed. Finally, important guidance documents and standards (ASTM, FDA, and EMA) that are important to consider for translating new biomaterials into clinical practice are highligted.

A compendium of current developments on polysaccharide and protein-based microneedles

Microneedles (MNs), i.e. minimally invasive three-dimensional microstructures that penetrate the stratum corneum inducing relatively little or no pain, have been studied as appealing therapeutic vehicles for transdermal drug delivery. Over the last years, the fabrication of MNs using biopolymers, such as polysaccharides and proteins, has sparked the imagination of scientists due to their recognized biocompatibility, biodegradability, ease of fabrication and sustainable character. Owing to their wide range of functional groups, polysaccharides and proteins enable the design and preparation of materials with tunable properties and functionalities. Therefore, these biopolymer-based MNs take a revolutionary step offering great potential not only in drug administration, but also in sensing and response to physiological stimuli. In this review, a critical and comprehensive overview of the polysaccharides and proteins employed in the design and engineering of MNs will be given. The strategies adopted for their preparation, their advantages and disadvantages will be also detailed. In addition, the potential and challenges of using these matrices to deliver drugs, vaccines and other molecules will be discussed. Finally, this appraisal ends with a perspective on the possibilities and challenges in research and development of polysaccharide and protein MNs, envisioning the future advances and clinical translation of these platforms as the next generation of drug delivery systems.

A multi-interpenetrating network (IPN) hydrogel with gelatin and silk fibroin

A mechanically strong composite hydrogel was produced based on an interpenetrating network (IPN) between gelatin and silk fibroin. When two layers of the IPN were created, the resulting hydrogel exhibited much improved mechanical properties. This hydrogel is biodegradable and non-cytotoxic and allows for cell adhesion and proliferation on the surface.

Absorption, distribution, metabolism and excretion of the biomaterials used in Nanocarrier drug delivery systems

Nanocarriers (NCs) are a type of drug delivery system commonly used to regulate the pharmacokinetic and pharmacodynamic properties of drugs. Although a wide variety of NCs has been developed, relatively few have been registered for clinical trials and even fewer are clinically approved. Overt or potential toxicity, indistinct mechanisms of drug release and unsatisfactory pharmacokinetic behavior all contribute to their high failure rate during preclinical and clinical testing. These negative characteristics are not only due to the NCs themselves but also to the materials of the drug nanocarrier system (MDNS) that are released in vivo. In this article, we review the main analytical techniques used for bioassay of NCs and MDNS and their pharmacokinetics after administration by various routes. We anticipate our review will serve to improve the understanding of MDNS pharmacokinetics and facilitate the development of NC drug delivery systems.

Combining Stem Cells and Biomaterial Scaffolds for Constructing Tissues and Cell Delivery

Combining stem cells with biomaterial scaffolds serves as a promising strategy for engineering tissues for both in vitro and in vivo applications. This updated review details commonly used biomaterial scaffolds for engineering tissues from stem cells. We first define the different types of stem cells and their relevant properties and commonly used scaffold formulations. Next, we discuss natural and synthetic scaffold materials typically used when engineering tissues, along with their associated advantages and drawbacks and gives examples of target applications. New approaches to engineering tissues, such as 3D bioprinting, are described as they provide exciting opportunities for future work along with current challenges that must be addressed. Thus, this review provides an overview of the available biomaterials for directing stem cell differentiation as a means of producing replacements for diseased or damaged tissues.

Functionalization of Silk Fibroin Electrospun Scaffolds via BMSC Affinity Peptide Grafting through Oxidative Self-Polymerization of Dopamine for Bone Regeneration

Electrospun scaffolds have been broadly studied to enhance bone regeneration because of the ability to simulate the structure and biological functions of the extracellular matrix. Polydopamine (PDA) is used to coat various surfaces at a slightly basic pH (8-8.5) and spontaneously reacts with nucleophilic functional groups. It is suitable for surface modifications of scaffolds correlated with bone formation. E7 is a newly discovered peptide with specific affinity for bone marrow mesenchymal stem cells (BMSCs). It can be useful for recruiting stem cells. Here, electrospun silk fibroin (SF) scaffolds were fabricated, and PDA was used for surface modification followed by grafting E7 (SF-PDA-E7). These composite SF-PDA-E7 electrospun scaffolds improved hydrophilicity, facilitated cell proliferation and adhesion, and boosted the osteogenic differentiation of BMSCs by creating osteoinduction conditions under the synergistic effects of PDA and E7. Moreover, the scaffolds showed high efficiency for recruiting BMSCs induced by E7 both in vitro and in vivo, which was associated with the SDF-1α/CXCR4 axis and the p38, extracellular signal-related kinase, and Akt signal transduction pathways. These functionalized electrospun scaffolds promoted regeneration of bone in the rat calvarial bone defect model. In general, this study verified that PDA could be a simple and efficient method for surface modification, and E7-grafted PDA-modified SF electrospun scaffolds were suitable for bone tissue engineering.

Hydrogel materials for the application of islet transplantation

Type 1 diabetes mellitus is a serious disease comprising approximately 10% of all diabetes cases, and the global incidence of type 1 diabetes mellitus is steadily rising without any promise of a cure in the near future. Although islet transplantation has proven to be an effective means of treating type 1 diabetes mellitus and promoting insulin independence in patients, its widespread implementation has been severely constrained by instances of post-transplantation islet cell death, rejection, and severe adverse immune responses. Islet encapsulation is an active area of research aimed at shielding implanted islets from immunological rejection and inflammation while still allowing for effective insulin and nutrient exchange with donor cells. Given their promising physical and chemical properties, hydrogels have been a major subject of focus in the field of islet transplantation and encapsulation technology, offering promising advances towards immunologically privileged islet implants. The present review therefore summarizes the current state of research regarding the use of hydrogels in the context of islet transplantation, including both natural molecular hydrogels and artificial polymer hydrogels, with the goal of understanding the current strengths and weaknesses of this treatment strategy.

Carbon-Fiber Based Microelectrode Array Embedded with a Biodegradable Silk Support for In Vivo Neural Recording

BACKGROUND

Recently, carbon fibers have been utilized to develop a depth-type microelectrode array for chronic neural recording. Since the diameter of carbon fibers is smaller than the conventional electrodes made of metal wires or microfabricated silicon, the carbon fiber electrodes showed an improved capability for chronic neural recording with less tissue damages. However, the carbon fiber based microelectrodes have a limitation of short insertion depth due to a low stiffness.

METHODS

We proposed a carbon fiber based microelectrode array embedded with a mechanical support structure to facilitate the penetration into the deeper brain. The support is made of biodegradable silk fibroin to reduce the reactive tissue responses. The 4-channel carbon fiber based microelectrode arrays were fabricated and accessed in terms of electrochemical impedance, recording capability for 1-month implantation in rat hippocampi. The electrodes with tungsten supports were fabricated and tested as a control group. Immunohistochemical analysis was performed to identify the reactive glial responses.

RESULTS

The carbon fiber based electrode arrays with silk supports showed about 2-fold impedance increase 2 weeks after implantation while the number of active electrodes decreased simultaneously. However, after 1 month, the electrode impedance decreased back to its initial value and the percentage of active electrodes also increased above 70%. Immunohistochemical staining clearly showed that the electrodes with silk supports induced less reactive glial responses than that with tungsten supports.

CONCLUSION

The proposed carbon fiber based microelectrode array is expected to be used for long-term in vivo neural recording from deep brain regions with the minimized reactive tissue response.

Nanopatterned silk fibroin films with high transparency and high haze for optical applications

Simultaneous high transparency and high haze are necessary for high-efficiency optical, photonic, and optoelectronic applications. However, a typical highly transparent film lacks high optical haze or vice versa. Here, we report a silk fibroin-based optical film that exhibits both ultrahigh optical transparency (>93%) and ultrahigh optical transmission haze (>65%). Also, in combination with the soft lithography method, different nanostructured silk fibroin films are presented and their optical properties are characterized as well. To demonstrate its exceptional performance in both high transmission and high optical haze, we combine the silk fibroin with the silicon photodiode and show that the efficiency can be increased by 6.96% with the silk fibroin film without patterns and 14.9% with the nanopatterned silk fibroin film. Silk provides excellent mechanical, optical, and electrical properties, and the reported high-performance silk fibroin can enable the development of next-generation biocompatible eco-friendly flexible electronic and optical devices.

Nanopatterned silk fibroin-based optical films exhibit both ultrahigh optical transparency and ultrahigh optical transmission haze.

Regenerated silk fibroin membranes as separators for transparent microbial fuel cells

In recent years novel applications of bioelectrochemical systems are exemplified by phototrophic biocathodes, biocompatible enzymatic fuel cells and biodegradable microbial fuel cells (MFCs). Herein, transparent silk fibroin membranes (SFM) with various fibroin content (2%, 4% and 8%) were synthesised and employed as separators in MFCs and compared with standard cation exchange membranes (CEM) as a control. The highest real-time power performance of thin-film SFM was reached by 2%-SFM separators: 25.7 ± 7.4 μW, which corresponds to 68% of the performance of the CEM separators (37.7 ± 3.1 μW). Similarly, 2%-SFM revealed the highest coulombic efficiency of 6.65 ± 1.90%, 74% of the CEM efficiency. Current for 2%-SFM reached 0.25 ± 0.03 mA (86% of CEM control). Decrease of power output was observed after 23 days for 8% and 4% and was a consequence of deterioration of SFMs, determined by physical, chemical and biological studies. This is the first time that economical and transparent silk fibroin polymers were successfully employed in MFCs.