Antimicrobial polymers

Super-Cationic Carbon Quantum Dots Synthesized from Spermidine as an Eye Drop Formulation for Topical Treatment of Bacterial Keratitis

We have developed a one-step method to synthesize carbon quantum dots (CQD_PAs) from biogenic polyamines (PAs) as an antibacterial agent for topical treatment of bacterial keratitis (BK). CQDs synthesized by direct pyrolysis of spermidine (Spd) powder through a simple dry heating treatment exhibit a solubility and yield much higher than those from putrescine and spermine. We demonstrate that CQDs obtained from Spds (CQD_Spds) possess effective antibacterial activities against non-multidrug-resistant Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, and Salmonella enterica serovar Enteritidis bacteria and also against the multidrug-resistant bacteria, methicillin-resistant S. aureus. The minimal inhibitory concentration (MIC) of CQD_Spds is ∼2500-fold lower than that of spermidine alone, demonstrating their strong antibacterial capabilities. Investigation of the possible mechanisms behind the antibacterial activities of the as-synthesized CQD_Spds indicates that the super-cationic CQD_Spds with small size (diameter ca. 6 nm) and highly positive charge (ζ-potential ca. +45 mV) cause severe disruption of the bacterial membrane. In vitro cytotoxicity, hemolysis, hemagglutination, genotoxicity, and oxidative stress and in vivo morphologic and physiologic cornea change evaluations show the good biocompatibility of CQD_Spds. Furthermore, topical ocular administration of CQD_Spds can induce the opening of the tight junction of corneal epithelial cells, thereby leading to great antibacterial treatment of S. aureus-induced BK in rabbits. Our results suggest that CQD_Spds are a promising antibacterial candidate for clinical applications in treating eye-related bacterial infections and even persistent bacteria-induced infections.

Polymers for binding of the gram-positive oral pathogen Streptococcus mutans

Streptococcus mutans is the most significant pathogenic bacterium implicated in the formation of dental caries and, both directly and indirectly, has been associated with severe conditions such as multiple sclerosis, cerebrovascular and peripheral artery disease. Polymers able to selectively bind S. mutans and/or inhibit its adhesion to oral tissue in a non-lethal manner would offer possibilities for addressing pathogenicity without selecting for populations resistant against bactericidal agents. In the present work two libraries of 2-(dimethylamino)ethyl methacrylate (pDMAEMA)-based polymers were synthesized with various proportions of either N,N,N-trimethylethanaminium cationic- or sulfobetaine zwitterionic groups. These copolymers where initially tested as potential macromolecular ligands for S. mutans NCTC 10449, whilst Escherichia coli MG1655 was used as Gram-negative control bacteria. pDMAEMA-derived materials with high proportions of zwitterionic repeating units were found to be selective for S. mutans, in both isolated and S. mutans-E. coli mixed bacterial cultures. Fully sulfobetainized pDMAEMA was subsequently found to bind/cluster preferentially Gram-positive S. mutans and S. aureus compared to Gram negative E. coli and V. harveyi. A key initial stage of S. mutans pathogenesis involves a lectin-mediated adhesion to the tooth surface, thus the range of potential macromolecular ligands was further expanded by investigating two glycopolymers bearing α-mannopyranoside and β-galactopyranoside pendant units. Results with these polymers indicated that preferential binding to either S. mutans or E. coli can be obtained by modulating the glycosylation pattern of the chosen multivalent ligands without incurring unacceptable cytotoxicity in a model gastrointestinal cell line. Overall, our results allowed to identify a structure-property relationship for the potential antimicrobial polymers investigated, and suggest that preferential binding to Gram-positive S. mutans could be achieved by fine-tuning of the recognition elements in the polymer ligands.

Evaluation of the Antimicrobial Activity of Cationic Polymers against Mycobacteria: Toward Antitubercular Macromolecules

Antimicrobial resistance is a global healthcare problem with a dwindling arsenal of usable drugs. Tuberculosis, caused by Mycobacterium tuberculosis, requires long-term combination therapy and multi- and totally drug resistant strains have emerged. This study reports the antibacterial activity of cationic polymers against mycobacteria, which are distinguished from other Gram-positive bacteria by their unique cell wall comprising a covalently linked mycolic acid-arabinogalactan-peptidoglycan complex (mAGP), interspersed with additional complex lipids which helps them persist in their host. The present study finds that poly(dimethylaminoethyl methacrylate) has particularly potent antimycobacterial activity and high selectivity over two Gram-negative strains. Removal of the backbone methyl group (poly(dimethylaminoethyl acrylate)) decreased antimycobacterial activity, and poly(aminoethyl methacrylate) also had no activity against mycobacteria. Hemolysis assays revealed poly(dimethylaminoethyl methacrylate) did not disrupt red blood cell membranes. Interestingly, poly(dimethylaminoethyl methacrylate) was not found to permeabilize mycobacterial membranes, as judged by dye exclusion assays, suggesting the mode of action is not simple membrane disruption, supported by electron microscopy analysis. These results demonstrate that synthetic polycations, with the correctly tuned structure are useful tools against mycobacterial infections, for which new drugs are urgently required.

Synthetic Random Copolymers as a Molecular Platform To Mimic Host-Defense Antimicrobial Peptides

Synthetic polymers have been used as a molecular platform to develop host-defense antimicrobial peptide (AMP) mimetics which are effective in killing drug-resistant bacteria. In this topical review, we will discuss the AMP-mimetic design and chemical optimization strategies as well as the biological and biophysical implications of AMP mimicry by synthetic polymers. Traditionally, synthetic polymers have been used as a chemical means to replicate the chemical functionalities and physicochemical properties of AMPs (e.g., cationic charge, hydrophobicity) to recapitulate their mode of action. However, we propose a new perception that AMP-mimetic polymers are an inherently bioactive platform as whole molecules, which mimic more than the side chain functionalities of AMPs. The tunable nature and chemical simplicity of synthetic random polymers facilitate the development of potent, cost-effective, broad-spectrum antimicrobials. The polymer-based approach offers the potential for many antimicrobial applications to be used directly in solution or attached to surfaces to fight against drug-resistant bacteria.

Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance

Microbial infections affect humans worldwide. Many quaternary ammonium compounds have been synthesized that are not only antibacterial, but also possess antifungal, antiviral and anti-matrix metalloproteinase capabilities. Incorporation of quaternary ammonium moieties into polymers represents one of the most promising strategies for preparation of antimicrobial biomaterials. Various polymerization techniques have been employed to prepare antimicrobial surfaces with quaternary ammonium functionalities; in particular, syntheses involving controlled radical polymerization techniques enable precise control over macromolecular structure, order and functionality. Although recent publications report exciting advances in the biomedical field, some of these technological developments have also been accompanied by potential toxicological and antimicrobial resistance challenges. Recent evidenced-based data on the biomedical applications of antimicrobial quaternary ammonium-containing biomaterials that are based on randomized human clinical trials, the golden standard in contemporary medicinal science, are included in the present review. This should help increase visibility, stimulate debates and spur conversations within a wider scientific community on the implications and plausibility for future developments of quaternary ammonium-based antimicrobial biomaterials.

Thiol-ol Chemistry for Grafting of Natural Polymers to Form Highly Stable and Efficacious Antibacterial Coatings

Bacterial contamination of surfaces and the associated infection risk is a significant threat to human health. Some natural antibacterial polymers with low toxicity are promising coating materials for alleviating pathogenic colonization on surfaces. However, widespread application of these polymers as antibacterial coatings is constrained by coating techniques which are not easily scalable due to stringent reaction conditions. Herein, thiol-ol reaction involving oxidative conjugation between thiol and hydroxyl groups is demonstrated as a facile technique to graft two natural polymer derivatives, agarose (AG) and quaternized chitosan (QCS), as antibacterial coatings on polymer and metal substrates. The substrate surfaces are first treated with oxygen plasma followed by UV-induced grafting of the polymers under atmospheric conditions. Dimercaprol, a FDA-approved drug, is used as both surface anchor and cross-linker of the polymer chains during grafting. The AG coating achieves >2 log reduction in Pseudomonas aeruginosa and Staphylococcus aureus biofilm formation, while the QCS coating reduces bacterial count from contaminated droplets on its surface by >95%. The coatings are noncytotoxic and exhibits a high degree of stability under conditions expected in their potential applications as antibacterial coating for biomedical devices (for AG), and for preventing pathogen transmission in the environment (for QCS).

Recent Advances in Antimicrobial Polymers: A Mini-Review

Human safety and well-being is threatened by microbes causing numerous infectious diseases resulting in a large number of deaths every year. Despite substantial progress in antimicrobial drugs, many infectious diseases remain difficult to treat. Antimicrobial polymers offer a promising antimicrobial strategy for fighting pathogens and have received considerable attention in both academic and industrial research. This mini-review presents the advances made in antimicrobial polymers since 2013. Antimicrobial mechanisms exhibiting either passive or active action and polymer material types containing bound or leaching antimicrobials are introduced. This article also addresses the applications of these antimicrobial polymers in the medical, food, and textile industries.

Blow-spun chitosan/PEG/PLGA nanofibers as a novel tissue engineering scaffold with antibacterial properties

Blow spinning is continuing to gain attention in tissue engineering, as the resultant nanofibrous structures can be used to create a biomimetic environment. In this study, blow spinning was used to construct nanofiber scaffolds with up to 10 % chitosan and poly(DL-lactide-co-glycolide) in the absence or presence of poly(ethylene glycol). Scanning electron microscopy demonstrated that nanofibers were distributed randomly to form three-dimensional mats. With respect to chitosan concentration, the average fiber diameter did not differ statistically in either the absence or presence of poly(ethylene glycol). In poly(ethylene glycol)-formulations, the average fiber diameter ranged from (981.9 ± 611.3) nm to (1139.2 ± 814.2) nm. In vitro cellular metabolic activity and proliferation studies using keratinized rat squamous epithelial cells (RL-65) showed that cytocompatibility was not compromised with the addition of poly(ethylene glycol). The cell responses at lower (1 and 2.5 %) chitosan concentrations were not significantly different from the groups without chitosan or no scaffold when cultivated for 3, 6, or 9 days. However, >15 % reduction in cellular responses were observed at 10 % chitosan. In presence of poly(ethylene glycol), nearly a 1-log incremental reduction in the number of colony forming units of Streptococcus mutans occurred as the chitosan concentration increased from 0-1 to 2.5 %. Bacterial preparations tested with poly(ethylene glycol) and 5 or 10 % chitosan were not significantly different than the positive kill control. Taken together, the most favorable conditions for attaining cytocompatibility and maintaining antibacterial functionality existed in poly(ethylene glycol)/poly(DL-lactide-co-glycolide) blow-spun scaffolds with integrated 1 or 2.5 % chitosan.

Evaluation of antimicrobial efficacy of quaternized poly[bis(2-chloroethyl)ether-alt-1,3-bis[3-(dimethylamino)propyl]urea] against targeted pathogenic and multi-drug-resistant bacteria

Here, we have investigated in vitro antimicrobial efficacy of a quaternized cationic polymer, poly[bis(2-chloroethyl)ether- alt-1,3-bis[3-(dimethylamino)propyl]urea] (polyquaternium-2), against gram-positive as well as gram-negative bacteria along with several multi-drug-resistant bacterial strains. The antimicrobial efficacy of this polymer was first tested against some clinical pathogens followed by microorganisms isolated from acne lesions. Interestingly, polyquaternium-2 exhibited significant antimicrobial activity against methicillin-resistant Staphylococcus aureus, for which very limited drugs are available. Most importantly, the polymer displayed low haemolytic activity and non-toxic behaviour against mammalian cells. The results showed the promising potential of the projected polymer to be utilized as an antibacterial agent for various biomedical applications.

Recent Developments in Antimicrobial Polymers: A Review

Antimicrobial polymers represent a very promising class of therapeutics with unique characteristics for fighting microbial infections. As the classic antibiotics exhibit an increasingly low capacity to effectively act on microorganisms, new solutions must be developed. The importance of this class of materials emerged from the uncontrolled use of antibiotics, which led to the advent of multidrug-resistant microbes, being nowadays one of the most serious public health problems. This review presents a critical discussion of the latest developments involving the use of different classes of antimicrobial polymers. The synthesis pathways used to afford macromolecules with antimicrobial properties, as well as the relationship between the structure and performance of these materials are discussed.

An investigation of the antibacterial ability and cytotoxicity of a novel cu-bearing 317L stainless steel

In order to solve the challenging problem of microbial infections caused by microorganisms on medical implants, it is imperative to develop novel antimicrobial biomaterials. This work demonstrated that 317L-Cu stainless steel (SS), created by adding copper through a solution and aging heat treatment process, exhibited good antibacterial properties against staphylococcus aureus, achieving 2 log reduction of planktonic cells after 5 days of incubation. In this study, the antibacterial test was performed using the plate count method, the fluorescence cell staining method and the quantitative polymerase chain reaction (qPCR) method. It is well known that a high concentration of copper ion can lead to cytotoxicity. This work explored the cytotoxicity of 317L-Cu SS through real-time cell analysis (RTCA). Experimental results demonstrated that the 317L-Cu SS possessed a satisfactory antibacterial ability against S. aureus, and the antibacterial rate based on the reduction of sessile cell count reached 98.3% after 24-hour treatment. The bacterial adhesion and the biofilm thickness were considerably reduced by the 317L-Cu SS. The results of RTCA suggested that 317L-Cu SS did not introduce cytotoxicity to mouse cells, indicating its suitability as a medical implant material.

Photosensitizer-Embedded Polyacrylonitrile Nanofibers as Antimicrobial Non-Woven Textile

Toward the objective of developing platform technologies for anti-infective materials based upon photodynamic inactivation, we employed electrospinning to prepare a non-woven textile comprised of polyacrylonitrile nanofibers embedded with a porphyrin-based cationic photosensitizer; termed PAN-Por(+). Photosensitizer loading was determined to be 34.8 nmol/mg material; with thermostability to 300 °C. Antibacterial efficacy was evaluated against four bacteria belonging to the ESKAPE family of pathogens (Staphylococcus aureus; vancomycin-resistant Enterococcus faecium; Acinetobacter baumannii; and Klebsiella pneumonia), as well as Escherichia coli. Our results demonstrated broad photodynamic inactivation of all bacterial strains studied upon illumination (30 min; 65 ± 5 mW/cm²; 400-700 nm) by a minimum of 99.9996+% (5.8 log units) regardless of taxonomic classification. PAN-Por(+) also inactivated human adenovirus-5 (~99.8% reduction in PFU/mL) and vesicular stomatitis virus (>7 log units reduction in PFU/mL). When compared to cellulose-based materials employing this same photosensitizer; the higher levels of photodynamic inactivation achieved here with PAN-Por(+) are likely due to the combined effects of higher photosensitizer loading and a greater surface area imparted by the use of nanofibers. These results demonstrate the potential of photosensitizer-embedded polyacrylonitrile nanofibers to serve as scalable scaffolds for anti-infective or self-sterilizing materials against both bacteria and viruses when employing a photodynamic inactivation mode of action.

Enzyme-responsive polyion complex (PIC) nanoparticles for the targeted delivery of antimicrobial polymers

Here we present new enzyme-responsive polyion complex (PIC) nanoparticles prepared from antimicrobial poly(ethylene imine) and an anionic enzyme-responsive peptide targeting Pseudomonas aeruginosa's elastase.

Here we present new enzyme-responsive polyion complex (PIC) nanoparticles prepared from antimicrobial poly(ethylene imine) and an anionic enzyme-responsive peptide targeting Pseudomonas aeruginosa's elastase. The synthetic conditions used to prepare these nanomaterials allowed us to optimise particle size and charge, and their stability under physiological conditions. We demonstrate that these enzyme responsive PIC nanoparticles are selectively degraded in the presence of P. aeruginosa elastase without being affected by other endogenous elastases. This enzyme-responsive PIC particle can exert an elastase-specific antimicrobial effect against P. aeruginosa without affecting non-pathogenic strains of these bacteria. These targeted enzyme-responsive PIC nanoparticles constitute a novel platform for the delivery of antimicrobial peptides and polymers, and can be a powerful tool in the current race against antimicrobial resistance.

Selective Antimicrobial Activities and Action Mechanism of Micelles Self-Assembled by Cationic Oligomeric Surfactants

This work reports that cationic micelles formed by cationic trimeric, tetrameric, and hexameric surfactants bearing amide moieties in spacers can efficiently kill Gram-negative E. coli with a very low minimum inhibitory concentration (1.70-0.93 μM), and do not cause obvious toxicity to mammalian cells at the concentrations used. With the increase of the oligomerization degree, the antibacterial activity of the oligomeric surfactants increases, i.e., hexameric surfactant > tetrameric surfactant > trimeric surfactant. Isothermal titration microcalorimetry, scanning electron microscopy, and zeta potential results reveal that the cationic micelles interact with the cell membrane of E. coli through two processes. First, the integrity of outer membrane of E. coli is disrupted by the electrostatic interaction of the cationic ammonium groups of the surfactants with anionic groups of E. coli, resulting in loss of the barrier function of the outer membrane. The inner membrane then is disintegrated by the hydrophobic interaction of the surfactant hydrocarbon chains with the hydrophobic domains of the inner membrane, leading to the cytoplast leakage. The formation of micelles of these cationic oligomeric surfactants at very low concentration enables more efficient interaction with bacterial cell membrane, which endows the oligomeric surfactants with high antibacterial activity.

CuBr2-promoted cyclization and bromination of arene–alkynes: C–Br bond formation via reductive elimination of Cu(iii) species

A CuBr₂-promoted cyclization and bromination of arene–alkynes was developed, affording 9-bromophenanthrenes via reductive elimination of the Cu(iii) species.

Daylight-stimulated antibacterial activity for sustainable bacterial detection and inhibition

Light-stimulated AIE-based nanocomplexes have been developed as convenient tools to accomplish the tasks of the detection and inhibition of bacteria.

A bactericidal microfluidic device constructed using nano-textured black silicon

Nano-structured black silicon (bSi) was used as a substratum for the construction of a microfluidic device of the highly efficient bactericidal action of this nano-textured surface againstPseudomonas aeruginosabacteria.

RAFT polymerization of bromotyramine-based 4-acryloyl-1,2,3-triazole: a functional monomer and polymer family through click chemistry

A series of bromotyramine-based 4-acryloyl-1,2,3-triazole monomers and polymers using click chemistry and RAFT polymerization.

Alternative antimicrobial approach: nano-antimicrobial materials

Despite numerous existing potent antibiotics and other antimicrobial means, bacterial infections are still a major cause of morbidity and mortality. Moreover, the need to develop additional bactericidal means has significantly increased due to the growing concern regarding multidrug-resistant bacterial strains and biofilm associated infections. Consequently, attention has been especially devoted to new and emerging nanoparticle-based materials in the field of antimicrobial chemotherapy. The present review discusses the activities of nanoparticles as an antimicrobial means, their mode of action, nanoparticle effect on drug-resistant bacteria, and the risks attendant on their use as antibacterial agents. Factors contributing to nanoparticle performance in the clinical setting, their unique properties, and mechanism of action as antibacterial agents are discussed in detail.

Capturing hepatocellular carcinoma cells using lactobionic acid-functionalized electrospun polyvinyl alcohol/polyethyleneimine nanofibers

Crosslinked PVA/PEI nanofibers can be functionalized with lactobionic acid via a PEG spacer for specific capture of hepatocellular carcinoma cells.