Tension-stabilized pores in giant vesicles: determination of pore size and pore line tension

Hypothesis: naked plasmid DNA is taken up by cells in vivo by a receptor-mediated process

Following the initial demonstration that intramuscularly-injected naked plasmid DNA (pDNA) is expressed in myofibers, it was shown that pDNA can be used for vaccination purposes. More recent studies have indicated that naked pDNA can also achieve high levels of transgene expression in vivo. This efficiency of naked pDNA expression, especially via intravascular route, is truly astounding. In this prospective review, we examine the possible mechanisms of naked pDNA uptake. The possible mechanisms; (a) large membrane disruption, (b) small membrane pores, and (c) receptor-mediated endocytosis, are considered in turn. Some recent original laboratory data relevant to these hypotheses are also presented.

Changes in electroporation thresholds of lipid membranes by surfactants and peptides

This article reviews recent work from our laboratory that explores how chemical additives may alter the threshold of electroporation of synthetic lipid bilayers. The addition of the nonionic block copolymeric surfactant, poloxamer 188 (P188), at a concentration of 1 mM increased the electroporation thresholds of planar lipid bilayer membranes made of azolectin. For a 10-microsecond rectangular pulse, P188-treated membranes were found to have a statistically higher threshold voltage, longer latency time to rupture, and lower postpulse conductance. Addition of the nonionic surfactant, octaethyleneglycol-mono-n-dodecyl-ether (C12E8), decreased the electroporation threshold of bilayer membranes made of 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC) by 10-40% for 10-microsecond- to 10-s-duration pulses, in a concentration-dependent manner over concentrations ranging from 0.1 to 10 mM. Postpulse membrane conductance also increased. The opposite effects of the two surfactants on electroporation thresholds may result from their very different structures, which would encourage different modes of surfactant-lipid interactions. To examine protein-lipid interactions and their effects on the electroporation threshold, the effects of a channel-forming polypeptide, gramicidin D (gD), was studied on membrane conductance and electroporation threshold. Electroporation thresholds for 15-ms pulses were unaffected by addition of gramicidin to POPC at a peptide:lipid concentration estimated to be 1:10,000, but increased significantly at ratios of 1:500 and 1:15, while membrane conductance increased monotonically with peptide concentration. A micropipette aspiration technique was applied to giant unilamellar POPC vesicles to measure changes in the membrane physical properties. When gD was added to give an estimated peptide:lipid ratio of 1:15, the membrane area expansivity modulus increased, indicating that the increase in electroporation threshold is correlated with a change in membrane stiffness. Thus, these findings demonstrate that surfactants or peptides can mediate the electroporation threshold of lipid bilayers.

Dynamics of membrane sealing in transient electropermeabilization of skeletal muscle membranes

Large supraphysiologic transmembrane electrical potentials are known to alter the molecular organization of the bilayer lipid component of cell membranes, leading to ionic permeabilization or "electroporation". Typically, membrane electroporation is followed by several orders of magnitude increases in electrical conductance and diffusive permeability to low-molecular-weight solutes. Electroporation may be transient or stable depending on whether the membrane eventually seals or remains permeabilized. Factors that control sealing have not been well characterized. This paper describes the kinetics of membrane sealing following electroporation by pulses over a range of supraphysiologic potentials. The increase in membrane conductance is highly nonlinear during a -440-mV, 4-ms pulse and reaches two orders of magnitude greater than baseline. Electroporation and relaxation sealing kinetics are quite different, reflecting a significant hysteresis effect. Thus, it appears that the magnitude and duration of the field pulse are important factors in sealing.

Dynamin: possible mechanism of "Pinchase" action

Dynamin is a GTPase playing an essential role in ubiquitous intra cellular processes involving separation of vesicles from plasma membranes and membranes of cellular compartments. Recent experimental progress (. Cell. 93:1021-1029;. Cell. 94:131-141) has made it possible to attempt to understand the action of dynamin in physical terms. Dynamin molecules are shown to bind to a lipid membrane, to self-assemble into a helicoidal structure constricting the membrane into a tubule, and, as a result of GTP hydrolysis, to mediate fission of this tubule (). In a similar way, dynamin is supposed to mediate fission of a neck connecting an endocytic bud and the plasma membrane, i.e., to complete endocytosis. We suggest a mechanism of this "pinchase" action of dynamin. We propose that, as a result of GTP hydrolysis, dynamin undergoes a conformational change manifested in growth of the pitch of the dynamin helix. We show that this gives rise to a dramatic change of shape of the tubular membrane constricted inside the helix, resulting in a local tightening of the tubule, which is supposed to promote its fission. We treat this model in terms of competing elasticities of the dynamin helix and the tubular membrane and discuss the predictions of the model in relation to the previous views on the mechanism of dynamin action.

Control of lipid membrane stability by cholesterol content

Cholesterol has a concentration-dependent effect on membrane organization. It is able to control the membrane permeability by inducing conformational ordering of the lipid chains. A systematic investigation of lipid bilayer permeability is described in the present work. It takes advantage of the transmembrane potential difference modulation induced in vesicles when an external electric field is applied. The magnitude of this modulation is under the control of the membrane electrical permeability. When brought to a critical value by the external field, the membrane potential difference induces a new membrane organization. The membrane is then permeable and prone to solubilized membrane protein back-insertion. This is obtained for an external field strength, which depends on membrane native permeability. This approach was used to study the cholesterol effect on phosphatidylcholine bilayers. Studies have been performed with lipids in gel and in fluid states. When cholesterol is present, it does not affect electropermeabilization and electroinsertion in lipids in the fluid state. When lipids are in the gel state, cholesterol has a dose-dependent effect. When present at 6% (mol/mol), cholesterol prevents electropermeabilization and electroinsertion. When cholesterol is present at more than 12%, electropermeabilization and electroinsertion are obtained under milder field conditions. This is tentatively explained by a cholesterol-induced alteration of the hydrophobic barrier of the bilayer core. Our results indicate that lipid membrane permeability is affected by the cholesterol content.

Energetic and spatial parameters for gating of the bacterial large conductance mechanosensitive channel, MscL

MscL is multimeric protein that forms a large conductance mechanosensitive channel in the inner membrane of Escherichia coli. Since MscL is gated by tension transmitted through the lipid bilayer, we have been able to measure its gating parameters as a function of absolute tension. Using purified MscL reconstituted in liposomes, we recorded single channel currents and varied the pressure gradient (P) to vary the tension (T). The tension was calculated from P and the radius of curvature was obtained using video microscopy of the patch. The probability of being open (Po) has a steep sigmoidal dependence on T, with a midpoint (T1/2) of 11.8 dyn/cm. The maximal slope sensitivity of Po/Pc was 0.63 dyn/cm per e-fold. Assuming a Boltzmann distribution, the energy difference between the closed and fully open states in the unstressed membrane was DeltaE = 18.6 kBT. If the mechanosensitivity arises from tension acting on a change of in-plane area (DeltaA), the free energy, TDeltaA, would correspond to DeltaA = 6.5 nm2. MscL is not a binary channel, but has four conducting states and a closed state. Most transition rates are independent of tension, but the rate-limiting step to opening is the transition between the closed state and the lowest conductance substate. This transition thus involves the greatest DeltaA. When summed over all transitions, the in-plane area change from closed to fully open was 6 nm2, agreeing with the value obtained in the two-state analysis. Assuming a cylindrical channel, the dimensions of the (fully open) pore were comparable to DeltaA. Thus, the tension dependence of channel gating is primarily one of increasing the external channel area to accommodate the pore of the smallest conducting state. The higher conducting states appear to involve conformational changes internal to the channel that don't involve changes in area.

Non-linear microscale alterations in membrane transport by electropermeabilization

The purpose of this study was to quantify the changes in cell membrane conductance in response to electropermeabilization, which may elucidate the mechanisms of tissue injury resulting from high-voltage electrical shock. A high-speed, space-clamp and voltage-clamp experimental configuration was used. The pulse parameters of an imposed transmembrane potential that are instrumental in membrane properties alteration were precisely controlled. The dynamics of the non-linear electroporation response was characterized.

Mechanical properties of model membranes studied from shape transformations of giant vesicles

Membrane deformations occur frequently in cell functioning. From the physical point of view, the understanding of such shape changes requires the introduction of mechanical parameters like bending elasticity. In this article it is shown how this physical property can be obtained from the analysis of small or large shape transformations from giant vesicles. Then it is demonstrated that the bending modulus is strongly dependent on the membrane composition and environmental conditions. This is the case for one-component bilayers (dilauroylphosphatidylcholine (DLPC), dimyristoylphosphatidylcholine (DMPC), dipalmitoylphosphatidylcholine and stearoyloleoyl-phosphatidylcholine (SOPC) and for two-component lipid mixtures (DMPC/cholesterol, DLPC/dilauroylphosphatidic acid). Further it is shown that the bending elasticity of natural lipid extracts (egg phosphatidylcholine, digalactosyl diglyceride and red blood cell lipid extracts) is generally smaller than that of comparable synthetic model membranes. The role of transmembrane proteins is examined by measuring the bending elasticity of SOPC/gramicidin mixtures. Finally, larger scale shape transformations of giant vesicles under an alternative electric field are discussed.

Thermally induced proliferation of pores in a model fluid membrane

The growth of thermally induced pores in a two-dimensional model fluid membrane is investigated by Monte Carlo simulation. Holes appear in the membrane via an activated process, and their subsequent growth is controlled by an edge energy per unit length or line tension. The barrier height and line tension, together with a lateral tension, are the independent parameters of the model. In the resulting phase diagram, a rupture transition separates an intact membrane from a disintegrated state. The approach to the ruptured state shows distinct regimes. Reducing the barrier height at large line tension produces multiple, quasi-independent, small holes whose behavior is dominated by their edge energy, whereas at lower line tensions shape fluctuations of the holes facilitate their coalescence into a single large hole. At a small value of line tension and large barrier height, a single hole spontaneously permeabilizes the membrane in an entropically driven phase transition. Entropy dominates pore growth for line tensions not far below those measured for artificial vesicles. Permeabilization of lipid bilayers by certain peptides involves perturbing lipid-lipid cohesive energies, and our simulations show that at small line tensions the entropy of hole shape fluctuations destroys the model membrane's stability.

The mechanism of lamellar-to-inverted hexagonal phase transitions in phosphatidylethanolamine: implications for membrane fusion mechanisms

We studied the mechanism of the lamellar-to-inverted hexagonal (L alpha/H[II]) phase transition, using time-resolved cryotransmission electron microscopy (TRC-TEM), 31P-NMR, and differential scanning calorimetry. The transition was initiated in dispersions of large unilamellar vesicles of dipalmitoleoyl phosphatidylethanolamine (DiPoPE). We present evidence that the transition proceeds in three steps. First, many small connections form between apposed membranes. Second, the connections aggregate within the planes of the bilayers, forming arrays with hexagonal order in some projections. Third, these quasihexagonal structures elongate into small domains of H(II) phase, acquiring lipid molecules by diffusion from contiguous bilayers. A previously proposed membrane fusion mechanism rationalizes these results. The modified stalk theory predicts that the L alpha/H(II) phase transition involves some of the same intermediate structures as membrane fusion. The small interbilayer connections observed via TRC-TEM are compatible with the structure of a critical intermediate in the modified stalk mechanism: the trans monolayer contact (TMC). The theory predicts that 1) TMCs should form starting at tens of degrees below TH; 2) when TMCs become sufficiently numerous, they should aggregate into transient arrays like the quasihexagonal arrays observed here by TRC-TEM; and 3) these quasihexagonal arrays can then elongate directly into H(II) phase domains. These predictions rationalize the principal features of our data, which are incompatible with the other transition mechanisms proposed to date. Thus these results support the modified stalk mechanism for both membrane fusion and the L alpha/H(II) phase transition. We also discuss some implications of the modified stalk theory for fusion in protein-containing systems. Specifically, we point out that recent data on the effects of hydrophobic peptides and viral fusion peptides on lipid phase behavior are consistent with an effect of the peptides on TMC stability.

Interaction of the influenza hemagglutinin fusion peptide with lipid bilayers: area expansion and permeation

Fusion is a crucial event in the infection of animal cells by enveloped viruses (e.g., HIV or influenza). Viral fusion is mediated by glycoproteins, spanning the viral envelope, which attach to a membrane surface and induce fusion of the viral envelope to the cellular membrane. Influenza fusion protein (hemagglutinin) contains an amino-terminal segment critical to fusion, referred to as the fusion peptide. We show here that the native fusion peptide (wt-20) of hemagglutinin destabilizes membranes formed of 99% 1 -stearoyl-2-oleoylphosphatidylcholine (SOPC). The first step in destabilization is rapid insertion of the peptide into the membrane, in which membrane area increases by as much as 11% in just seconds. We visualized and quantified the area expansion by using optical video microscopy combined with micropipette aspiration. This rapid membrane area expansion is followed by the formation of membrane defects in the size range of 0.5 nm, and results in membrane rupture. Both the rate of area increase and maximum area increase are significantly higher at a pH near 5.0 compared to pH 7.0. These results suggest that enhanced membrane insertion of wt-20 and accompanying area expansion at pH 5.0 are responsible for the relatively greater lytic activity at this pH. We show that a deletion of the N-terminal glycine of wt-20 results in a lack of area expansion or membrane perturbation at pH 5.0.

Dynamically stabilized pores in bilayer membranes

Zhelev and Needham have recently created large, quasistable pores in artificial lipid bilayer vesicles. Initially created by electroporation, the pores remain open for up to several seconds before quickly snapping shut. This result is surprising, in light of the large line tension for holes in bilayer membranes and the rapid time scale for closure of large pores. We show how pores can be dynamically stabilized via a new feedback mechanism. We also explain quantitatively the observed sudden pore closure as a tangent bifurcation. Finally, we show how Zhelev and Needham's experiment can be used to measure accurately the pore line tension, an important material parameter. For their stearoyloleoylphosphatidylcholine/cholesterol mixture we obtain a line tension of 2.6 x 10(-6) dyn.

Micropipette suction for measuring piconewton forces of adhesion and tether formation from neutrophil membranes

A new method for measuring piconewton-scale forces that employs micropipette suction is presented here. Spherical cells or beads are used directly as force transducers, and forces as small as 10-20 pN can be imposed. When the transducer is stationary in the pipette, the force is simply the product of the suction pressure and the cross-sectional area of the pipette minus a small correction for the narrow gap that exists between the transducer and the pipette wall. When the transducer is moving along the pipette, the force on it is corrected by a factor that is proportional to the ratio of its velocity relative to its drag-free velocity. With this technique, the minimum force required to form a membrane tether from neutrophils is determined (45 pN), and the length of the microvilli on the surface of neutrophils is inferred. The strength of this technique is in its simplicity and its ability to measure forces between cells without requiring a separate theory or a calibration against an external standard and without requiring the use of a solid surface.

Energetic constraints on the creation of cell membrane pores by magnetic particles

Naturally occurring and contaminant ferromagnetic and ferrimagnetic particles have been found within or near cells, and might allow pulsed magnetic fields to create transient cell membrane opening ("pores"). We show that this possibility is significantly constrained by the maximum rotational energy that can be transferred to the cell membrane. For single biologically synthesized magnetosomes (radius rmag approximately 10(-7) m, magnetic moment mu approximately 2 x 10(-15) A m2) and typical cell membranes, the estimated pulse magnitude must exceed Bo approximately 6 x 10(-3) to 7 x 10(-2) T, and the optimal pulse durations are in the range 10(-5) s < tpulse < 10(-1) s. For larger contaminant particles with larger net magnetic moments, the pulse magnitudes could be only somewhat smaller, and the optimal durations are about the same. Very large pulses that exceed the coercive force of a particle are predicted to have a smaller effective magnitude and shorter effective duration.

Exchange of monooleoylphosphatidylcholine with single egg phosphatidylcholine vesicle membranes

In a previous paper we described the experiments and the framework of a model for the exchange of monooleoylphosphatidylcholine with a single egg phosphatidylcholine membrane. In the present paper a model is presented that relates the experimentally measured apparent characteristics of the overall kinetics of lysolipid exchange to the true rates of lysolipid exchange and interbilayer transfer. It is shown that the adsorption of the lysolipid follows two pathways: one through the adsorption of lipid monomers and other through the fusion of micelles. The desorption of lysolipid follows a single pathway, namely, the desorption of monomers. The overall rate of fast desorption under convective flow conditions gives the true rate of monomer desorption from the outer membrane monolayer. The overall rate of both slow lysolipid uptake and slow desorption gives the rate of interbilayer transfer. Because of the uneven distribution of lysolipid between the two monolayers during its uptake, one of the membrane monolayers is apparently extended relative to the other. This relative extension of one of the monolayers induces a monolayer tension. The induced monolayer tension can increase up to 7 mN.m-1, when most of the intercalated lysolipid only partitions into the monolayer facing the lysolipid solution. This value is similar to the measured value for the critical monolayer tension of membrane failure, which is on the order of 5 mN.m-1. The similarity of the magnitudes of the induced monolayer tension during monooleoylphosphatidylcholine exchange and the monolayer tension of membrane failure suggests that the interbilayer lipid transfer may be affected by the formation of short living membrane defects. Furthermore, the pH-induced interbilayer exchange of phosphatidylglycerol is considered. In this case, it is shown that the rate of interbilayer transfer is a function of the phosphatidylglycerol concentration in the membrane.

Entropy-driven instability and rupture of fluid membranes

A computer simulation is used to investigate hole formation in a model membrane. The model parameters are the stress applied to the membrane, and the edge energy per unit length along the hole boundary (edge tension). Even at zero stress, the membrane has an entropically driven instability against hole formation. Within the model, the minimum edge tension required for the stability of a typical biological membrane is in the region of 1 x 10(-11) J/m, which is similar to the edge tension obtained in many measurements of biomembranes. At the zero-stress instability threshold, the hole shape is the same as a self-avoiding ring, but under compression, the hole shape assumes a branched polymer form. In the presence of large holes at zero stress, the membrane itself behaves like a branched polymer. The boundaries of the phase diagram for membrane stability are obtained, and general features of the rate of membrane rupture under stress are investigated. A model in which the entropy of hole formation is proportional to the hole perimeter is used to interpret the simulation results at small stress near the instability threshold.

Microinjection into giant vesicles and light microscopy investigation of enzyme-mediated vesicle transformations

BACKGROUND

'Giant vesicles' have diameters of several micrometers and can be observed by light microscopy. Their size may allow manipulation of individual vesicles and direct observation of the progress of a chemical reaction in real time. We set out to test this possibility using enzymatic hydrolysis of vesicle components as a model system.

RESULTS

We describe a novel micromanipulation technique that allows us to microinject femtoliter amounts of a reagent solution adjacent to or into giant vesicles with diameters ranging from 10 to 60 microm. The vesicle transformations can be monitored directly in real time by light microscopy and recorded by video analysis. Snake venom phospholipase A2 was added to vesicles composed of 1-palmitoyl-2-oleoyl-sn-glycerol-3-phosphocholine, and the enzymatic hydrolysis of components of the lipid bilayer was observed over time. A specific effect on the targeted giant vesicle was seen and video recorded, while the neighbouring vesicles remained unaffected. Addition of the enzyme to the outside of a vesicle caused it to burst, whereas injection of the enzyme inside a vesicle resulted in a slow and constant decrease in its size, until it eventually disappeared from the resolution power of the light microscope.

CONCLUSIONS

These results show that it is possible to micromanipulate an individual vesicle, and to follow visually the progress of an enzymatic reaction occurring on the vesicle bilayer over time.

Electroporation of cell membranes: a review

The study of the electroporation on biomembranes has become one of the most exciting topics in the biophysical and biotechnological areas. Researchers all over the world have been focused on four major areas: measurements of transmembrane potential (TMP); dynamics of electroporation such as time sequence, properties of electropores such as size, structure, and population; membrane permeabilization and breakdown theory; and the effects of secondary factors such as ions type and cell growth stage on electroporation. This article reviews some of the recent discoveries and theories on this subject. Studies on TMP and pore dynamics remain a difficult task. Since the area of electroporation on a biomembrane is small (less than 0.1% of total surface area) and the time sequence of electropores is in the submicrosecond range measuring devices with subtle detection and time resolution are required. While more and more studies have shown the formation sequence of electropore(s) at specific locations on various biomembranes, the pore(s) widening process and the subsequent membrane breakdown mechanisms remain controversial. The influence of electromechanical stress or transmembrane potential on membrane discharge and rupture seems to be a function of various factors such as membrane properties, external medium, and the protocols of electroporators.

The effect of bilayer composition on calcium ion transport facilitated by fluid shear stress

Passive calcium ion permeability across liposome bilayers is increased during exposure to fluid shear forces attainable in the mammalian vasculature. In this study, liposomes prepared from three different lipid mixtures (phosphatidylcholine alone; phosphatidylcholine and cholesterol; a mixture of anionic and cationic phospholipids plus cholesterol) are exposed to uniform shear stress in a rotational viscometer. Liposome permeability to calcium ion is estimated from continuous measurement of free intraliposome calcium ion concentration using a fluorescence technique. Calcium ion permeability in the absence of fluid force and susceptibility to shear-induced permeability modulation are positively correlated with estimated bilayer compressibility. Fluid shear forces are presumed to influence bilayer packing and modulate defect formation in proportion to bilayer compressibility. Bilayer defects produced by fluid forces may increase liposome permeability.

Millisecond measurement of transport during and after an electroporation pulse

Electroporation involves the application of an electric field pulse that creates transient aqueous pathways in lipid bilayer membranes. Transport through these pathways can occur by different mechanisms during and after a pulse. To determine the time scale of transport and the mechanism(s) by which it occurs, efflux of a fluorescent molecule, calcein, across erythrocyte ghost membranes was measured with a fluorescence microscope photometer with millisecond time resolution during and after electroporation pulses several milliseconds in duration. One of four outcomes was typically observed. Ghosts were: (1) partially emptied of calcein, involving efflux primarily after the pulse; (2) completely emptied of calcein, involving efflux primarily after the pulse; (3) completely emptied of calcein, involving efflux both during and after the pulse; or (4) completely emptied of calcein, involving efflux primarily during the pulse. Partial emptying, involving significant efflux during the pulse, was generally not observed. We conclude that under some conditions transport caused by electroporation occurs predominantly by electrophoresis and/or electroosmosis during a pulse, although under other conditions transport occurs in part or almost completely by diffusion within milliseconds to seconds after a pulse.

Micropipette manipulation technique for the monitoring of pH-dependent membrane lysis as induced by the fusion peptide of influenza virus

We have assembled a micropipette aspiration assay to measure membrane destabilization events in which large (20-30 microns diameter) unilamellar vesicles are manipulated and exposed to membrane destabilizing agents. Single events can be seen with a light microscope and are recorded using both a video camera and a photomultiplier tube. We have performed experiments with a wild-type fusion peptide from influenza virus (X31) and found that it induces pH-dependent, stochastic lysis of large unilamellar vesicles. The rate and extent of lysis are both maximum at pH 5; the maximum rate of lysis is 0.018 s-1 at pH 5. An analysis of our data indicates that the lysis is not correlated either to the size of the vesicles or to the tension created in the vesicle membranes by aspiration.