Stimuli-responsive LbL capsules and nanoshells for drug delivery

UV and NIR-Responsive Layer-by-Layer Films Containing 6-Bromo-7-hydroxycoumarin Photolabile Groups

This paper describes polyelectrolyte multilayer films prepared by the layer-by-layer (LbL) technique capable of undergoing dissolution upon exposure to either ultraviolet or near-infrared light. Film dissolution is driven by photochemical deprotection of a random methacrylic copolymer with two types of side chains: (i) 6-bromo-7-hydroxycoumarinyl esters, photocleavable groups that are known to have substantial two-photon photolysis cross sections, and (ii) cationic residues from the commercially available monomer N,N-dimethylaminoethyl methacrylate (DMAEMA). In addition, the dependence of stability of both unirradiated and irradiated films on pH provides experimental evidence for the necessity of disrupting both ion-pairing and hydrophobic interactions between polyelectrolytes to realize film dissolution. This work therefore provides both new fundamental insight regarding photolabile LbL films and expands their applied capabilities to nonlinear photochemical processes.

Mesenchymal Stem Cells Engineering: Microcapsules-Assisted Gene Transfection and Magnetic Cell Separation

Stem cell engineering-the manipulation and functionalization of stem cells involving genetic modification-can significantly expand their applicability for cell therapy in humans. Toward this aim, reliable, standardized, and cost-effective methods for cell manipulation are required. Here we explore the potential of magnetic multilayer capsules to serve as a universal platform for nonviral gene transfer, stem cell magnetization, and magnetic cell separation to improve gene transfer efficiency. In particular, the following experiments were performed: (i) a study of the process of internalization of magnetic capsules into stem cells, including capsule co-localization with established markers of endo-lysosomal pathway; (ii) characterization and quantification of capsule uptake with confocal microscopy, electron microscopy, and flow cytometry; (iii) intracellular delivery of messenger RNA and separation of gene-modified cells by magnetic cell sorting (MACS); and (iv) analysis of the influence of capsules on cell proliferation potential. Importantly, based on the internalization of magnetic capsules, transfected cells became susceptible to external magnetic fields, which made it easy to enrich gene-modified cells using MACS (purity ∼95%), and also to influence their migration behavior. In summary, our results underline the high potential of magnetic capsules in stem cell functionalization, namely (i) to increase gene-transfer efficiency and (ii) to facilitate enrichment and targeting of transfected cells. Finally, we did not observe a negative impact of the capsules used on the proliferative capacity of stem cells, proving their high biocompatibility.

Polymeric and Lipid Membranes-From Spheres to Flat Membranes and vice versa

Membranes are important components in a number of systems, where separation and control of the flow of molecules is desirable. Controllable membranes represent an even more coveted and desirable entity and their development is considered to be the next step of development. Typically, membranes are considered on flat surfaces, but spherical capsules possess a perfect "infinite" or fully suspended membranes. Similarities and transitions between spherical and flat membranes are discussed, while applications of membranes are also emphasized.

Highly efficient delivery of potent anticancer iminoquinone derivative by multilayer hydrogel cubes

We report a novel delivery platform for a highly potent anticancer drug, 7-(benzylamino)-3,4-dihydro-pyrrolo[4,3,2-de]quinolin-8(1H)-one (BA-TPQ), using pH- and redox-sensitive poly(methacrylic acid) (PMAA) hydrogel cubes of micrometer size as the encapsulating matrix. The hydrogels are obtained upon cross-linking PMAA with cystamine in PMAA/poly(N-vinylpyrrolidone) multilayers assembled within mesoporous sacrificial templates. The BA-TPQ-loaded hydrogels maintain their cubical shape and pH-sensitivity after lyophilization, which is advantageous for long-term storage. Conversely, the particles degrade in vitro in the presence of glutathione (5mM) providing 80% drug release within 24h. Encapsulating BA-TPQ into hydrogels significantly increases its transport via Caco-2 cell monolayers used as a model for oral delivery where the apparent permeability of BA-TPQ-hydrogel cubes was∼2-fold higher than that of BA-TPQ. BA-TPQ-hydrogel cubes exhibit better anticancer activity against HepG2 (IC50=0.52µg/mL) and Huh7 (IC50=0.29µg/mL) hepatoma cells with a 40% decrease in the IC50 compared to the non-encapsulated drug. Remarkably, non-malignant liver cells have a lower sensitivity to BA-TPQ-hydrogel cubes with 2-fold increased IC50 values compared to those of cancer cells. In addition, encapsulating BA-TPQ in the hydrogels amplifies the potency of the drug via down-regulation of MDM2 oncogenic protein and upregulation of p53 (a tumor suppressor) and p21 (cell proliferation suppressor) expression in HepG2 liver cancer cells. Moreover, enhanced inhibition of MDM2 protein expression by BA-TPQ-hydrogel cubes is independent of p53 status in Huh7 cells. This drug delivery platform of non-spherical shape provides a facile method for encapsulation of hydrophobic drugs and can facilitate the enhanced efficacy of BA-TPQ for liver cancer therapy.

STATEMENT OF SIGNIFICANCE

Many potent anticancer drugs are hydrophobic and lack tumor selectivity, which limits their application in cancer therapy. Although cubical hydrogels of poly(methacrylic acid) exhibit excellent biocompatibility and versatility, they have not been investigated for hydrophobic drug delivery due to poor mechanical stability and incompatibility between hydrophobic drugs and a hydrophilic hydrogel network. In this study, we provide a facile method to prepare a multilayer hydrogel-based platform with controlled nanostructure, cubical shape and redox-responsiveness for delivery of highly potent anticancer therapeutics, hydrophobic BA-TPQ. The BA-TPQ-hydrogel cubes have exceptional structural stability upon lyophilization which is advantageous for a long-term storage. The greatly enhanced trans-epithelial permeability and amplified anti-tumor activity of BA-TPQ are achieved by encapsulation in these hydrogel cubes. Furthermore, the anticancer BA-TPQ-hydrogel platform retains the selective activity of BA-TPQ to hepatocellular carcinoma cells. Overall, the produced BA-TPQ-hydrogel cubes demonstrate a high potential for clinical liver cancer therapy.

Temperature-responsive nanogel multilayers of poly(N-vinylcaprolactam) for topical drug delivery

We report nanothin temperature-responsive hydrogel films of poly(N-vinylcaprolactam) nanoparticles (νPVCL) with remarkably high loading capacity for topical drug delivery. Highly swollen (νPVCL)_n multilayer hydrogels, where n denotes the number of nanoparticle layers, are produced by layer-by-layer hydrogen-bonded assembly of core-shell PVCL-co-acrylic acid nanoparticles with linear PVPON followed by cross-linking of the acrylic acid shell with either ethylene diamine (EDA) or adipic acid dihydrazide (AAD). We demonstrate that a (νPVCL)₅ film undergoes dramatic and reversible swelling up to 9 times its dry thickness at pH = 7.5, indicating 89v/v % of water inside the network. These hydrogels exhibit highly reversible ∼3-fold thickness changes with temperature variations from 25 to 50°C at pH = 5, the average pH of human skin. We also show that a (νPVCL)₃₀ hydrogel loaded with ∼120µgcm^-2 sodium diclofenac, a non-steroidal anti-inflammatory drug used for osteoarthritis pain management, provides sustained permeation of this drug through an artificial skin membrane for up to 24h at 32°C (the average human skin surface temperature). The cumulative amount of diclofenac transported at 32°C from the (νPVCL)₃₀ hydrogel after 24h is 12 times higher than that from the (νPVCL)₃₀ hydrogel at 22°C. Finally, we demonstrate that the (νPVCL) hydrogels can be used for multiple drug delivery by inclusion of Nile red, fluorescein and DAPI dyes within the νPVCL nanoparticles prior to hydrogel assembly. Using confocal microscopy we observed the presence of separate dye-loaded νPVCL compartments within the hydrogel matrix with all three dyes confined to the nanogel particles without intermixing between the dyes. Our study provides opportunity for development of temperature-responsive multilayer hydrogel coatings made via the assembly of core-shell nanogel particles which can be used for skin-sensitive materials for topical drug delivery.

The acidic tumor microenvironment: a target for smart cancer nano-theranostics

The acidic tumor microenvironment (TME), which mainly results from the high glycolytic rate of tumor cells, has been characterized as a hallmark of solid tumors and found to be a pivotal factor participating in tumor progression. Recently, due to the increasing understanding of the acidic TME, it has been shown that the acidic TME could be utilized as a multifaceted target during the design of various pH-responsive nanoscale theranostic platforms for the precise diagnosis and effective treatment of cancers. In this article, we will give a focused overview on the latest progress in utilizing this characteristic acidic TME as the target of nano-theranostics to enable cancer-specific imaging and therapy. The future perspectives in the development of acidic TME-targeting nanomedicine strategies will be discussed afterwards.

Versatile quarto stimuli nanostructure based on Trojan Horse approach for cancer therapy: Synthesis, characterization, in vitro and in vivo studies

Nanostructured delivery and diagnostic systems that induces specific targeting properties by exploiting the local physicochemical tumour characteristics will be evaluated is the present work. It is well known that cancer cells have specific physicochemical characteristics, which can be taken into consideration for the design of a broad spectrum of drug delivery systems (DDS). Some of those characteristics including the different temperature environment their susceptibility when temperature ranges between 40 and 43°C where cell apoptosis is induced, the intra- and extra-cellular pH which varies from 6.0 to 6.8, for cancer cells, and 6.5 to 7.4 for normal cells respectively, (lysosomes acidic pH ranges 4-5). Additional significant factors are the overexpressed receptors on the tumour surface. Loading and release studies were carried out by using the anthracycline drug Doxorubicin and their cytotoxicity was evaluated by using the MTT assay in healthy and diseased cell lines. The highlight of this work is the in vitro and in vivo studies which were performed in order to evaluate different nanostructures as for their biodistribution, pharmacokinetic and toxicity per se.

Protein A Functionalized Polyelectrolyte Microcapsules as a Universal Platform for Enhanced Targeting of Cell Surface Receptors

Targeted delivery systems recognizing specific receptors are a key element in personalized medicine. Such systems allow the delivery of therapeutics to desired sites of the body, increasing their local concentration and thus reducing the side effects. In this study, we fabricate chemically cross-linked (PAH/PAA)₂ microcapsules coated with specific cell-targeting antibodies in random (via direct covalent coupling to the surface) or optimized (via supporting layer of protein A) orientation. We use these antibody-functionalized capsules to target major histocompatibility complex (MHC) class I receptors in living cells and quantify the efficiency of targeting by flow cytometry. We show for the first time the selective binding of polyelectrolyte microcapsules to MHC class I receptors, and confirm that targeting is allotype-specific. Remarkably, protein A assisted immobilization of antibodies enhances targeting efficiency by 40-50% over capsules with randomly attached antibodies. Moreover, biofunctionalized capsules reveal low levels of cytotoxicity and nonspecific binding, excluding the need of additional modification with poly(ethylene glycol). Thus, protein A coated (PAH/PAA)₂ microcapsules represent a unique example of universal targeting tools providing high potential for selective binding to a broad range of cell surface receptors.

Localized and Controlled Delivery of Nitric Oxide to the Conventional Outflow Pathway via Enzyme Biocatalysis: Toward Therapy for Glaucoma

Nitric oxide (NO) is able to lower intraocular pressure (IOP); however, its therapeutic effects on outflow physiology are location- and dose-dependent. A NO delivery platform that directly targets the resistance-generating region of the conventional outflow pathway and locally liberates a controlled dose of NO is reported. An increase in outflow facility (decrease in IOP) is demonstrated in a mouse model.

Diverse Applications of Nanomedicine

The design and use of materials in the nanoscale size range for addressing medical and health-related issues continues to receive increasing interest. Research in nanomedicine spans a multitude of areas, including drug delivery, vaccine development, antibacterial, diagnosis and imaging tools, wearable devices, implants, high-throughput screening platforms, etc. using biological, nonbiological, biomimetic, or hybrid materials. Many of these developments are starting to be translated into viable clinical products. Here, we provide an overview of recent developments in nanomedicine and highlight the current challenges and upcoming opportunities for the field and translation to the clinic.

Theranostic Multilayer Capsules for Ultrasound Imaging and Guided Drug Delivery

Despite the accessibility of ultrasound, the clinical potential of ultrasound-active theranostic agents has not been fully realized because it requires combining sufficient imaging contrast, high encapsulation efficiency, and ultrasound-triggered release in one entity. We report on theranostic polymer microcapsules composed of hydrogen-bonded multilayers of tannic acid and poly(N-vinylpyrrolidone) that produce high imaging contrast and deliver the anticancer drug doxorubicin upon low-power diagnostic or high-power therapeutic ultrasound irradiation. These capsules exhibit excellent imaging contrast in both brightness and harmonic modes and show prolonged contrast over six months, unlike commercially available microbubbles. We also demonstrate low-dose gradual and high-dose fast release of doxorubicin from the capsules by diagnostic (∼100 mW/cm2) and therapeutic (>10 W/cm2) ultrasound irradiation, respectively. We show that the imaging contrast of the capsules can be controlled by varying the number of layers, polymer type (relatively rigid tannic acid versus more flexible poly(methacrylic acid)), and polymer molecular weight. In vitro studies demonstrate that 50% doxorubicin release from ultrasound-treated capsules induces 97% cytotoxicity to MCF-7 human cancer cells, while no cytotoxicity is found without the treatment. Considering the strong ultrasound imaging contrast, high encapsulation efficiency, biocompatibility, and tunable drug release, these microcapsules can be used as theranostic agents for ultrasound-guided chemotherapy.

Formulation for Oral Delivery of Lactoferrin Based on Bovine Serum Albumin and Tannic Acid Multilayer Microcapsules

Lactoferrin (Lf) has considerable potential as a functional ingredient in food, cosmetic and pharmaceutical applications. However, the bioavailability of Lf is limited as it is susceptible to digestive enzymes in gastrointestinal tract. The shells comprising alternate layers of bovine serum albumin (BSA) and tannic acid (TA) were tested as Lf encapsulation system for oral administration. Lf absorption by freshly prepared porous 3 μm CaCO₃ particles followed by Layer-by-Layer assembly of the BSA-TA shells and dissolution of the CaCO₃ cores was suggested as the most efficient and harmless Lf loading method. The microcapsules showed high stability in gastric conditions and effectively protected encapsulated proteins from digestion. Protective efficiency was found to be 76 ± 6% and 85 ± 2%, for (BSA-TA)₄ and (BSA-TA)₈ shells, respectively. The transit of Lf along the gastrointestinal tract (GIT) of mice was followed in vivo and ex vivo using NIR luminescence. We have demonstrated that microcapsules released Lf in small intestine allowing 6.5 times higher concentration than in control group dosed with the same amount of free Lf. Significant amounts of Lf released from microcapsules were then absorbed into bloodstream and accumulated in liver. Suggested encapsulation system has a great potential for functional foods providing lactoferrin.

In Vitro and in Vivo Visualization and Trapping of Fluorescent Magnetic Microcapsules in a Bloodstream

Remote navigation and targeted delivery of biologically active compounds is one of the current challenges in the development of drug delivery systems. Modern methods of micro- and nanofabrication give us new opportunities to produce particles and capsules bearing cargo to deploy and possess magnetic properties to be externally navigated. In this work we explore multilayer composite magnetic microcapsules as targeted delivery systems in vitro and in vivo studies under natural conditions of living organism. Herein, we demonstrate magnetic addressing of fluorescent composite microcapsules with embedded magnetite nanoparticles in blood flow environment. First, the visualization and capture of the capsules at the defined blood flow by the magnetic field are shown in vitro in an artificial glass capillary employing a wide-field fluorescence microscope. Afterward, the capsules are visualized and successfully trapped in vivo into externally exposed rat mesentery microvessels. Histological analysis shows that capsules infiltrate small mesenteric vessels whereas large vessels preserve the blood microcirculation. The effect of the magnetic field on capsule preferential localization in bifurcation areas of vasculature, including capsule retention at the site once external magnet is switched off is discussed. The research outcome demonstrates that microcapsules can be effectively addressed in a blood flow, which makes them a promising delivery system with remote navigation by the magnetic field.

Engineering and Design of Polymeric Shells: Inwards Interweaving Polymers as Multilayer Nanofilm, Immobilization Matrix, or Chromatography Resins

Hydrogels with complex internal structures are required for advanced drug delivery systems and tissue engineering or used as inks for 3D printing. However, hydrogels lack the tunability and diversity of polymeric shells and require complicated postsynthesis steps to alter its structure or properties. We report on the first integrated approach to assemble and design polymeric shells to take on various complex structures and functions such as multilayer nanofilms, multidensity immobilization matrix, or multiadhesive chromatography resins via the tuning of four assembly parameters: (a) poly(allylamine) (PA) concentration, (b) number of poly(allylamine)/poly(styrenesulfonic acid) (PA/PSSA) incubations, (c) poly(allylamine) (PA) to poly(ethylene glycol) (PEG) grafting ratio, and (d) % H₂O present during assembly. Our approach combines the complex 3D structures of hydrogels with the versatility of self-assembled polymeric layers. Polymeric shells produced from our method have a highly uniform material distribution and well-defined shell boundaries. Shell thickness, density, and adhesive properties are easily tunable. By virtue of such unique material features, we demonstrate that polymeric shells can be designed to expand beyond its conventional function as thin films and serve as immobilization matrix, chromatography resins, or even reaction compartments. This technique could also uncover interesting perspectives in the development of novel multimaterials for 3D printing to synthesize scaffolds at a higher order of complexity.

Spongelike Porous Silica Nanosheets: From "Soft" Molecular Trapping to DNA Delivery

Spongelike porous silica nanosheets, with nanometer thicknesses and pores whose diameters are on the hundreds-of-nanometers scale, have been used as a novel carrier for molecular immobilization of different guests. Enhanced properties of encapsulation were shown for drug molecules of different dimensions due to "softness" caused by the specific nanometric features of the porous structure. The encapsulating effect of the structure results in sustained and stimuli-responsive release behavior of immobilized guest molecules. By studying the adsorption process of DNA molecules on spongelike porous nanosheets or on solid nanoparticles by use of a quartz crystal microbalance, we show that better elasticity of surfaces of the porous nanosheets over that of solid nanoparticles can improve the immobilization of guest molecules. The coating of porous silica nanosheets onto various substrates was also found to effectively mediate DNA delivery to mammalian cells.

Polymer Conformations in Ionic Microgels in the Presence of Salt: Theoretical and Mesoscale Simulation Results

We investigate the conformational properties of polymers in ionic microgels in the presence of salt ions by molecular dynamics simulations and analytical theory. A microgel particle consists of coarse-grained linear polymers, which are tetra-functionally crosslinked. Counterions and salt ions are taken into account explicitly, and charge-charge interactions are described by the Coulomb potential. By varying the charge interaction strength and salt concentration, we characterize the swelling of the polyelectrolytes and the charge distribution. In particular, we determine the amount of trapped mobile charges inside the microgel and the Debye screening length. Moreover, we analyze the polymer extension theoretically in terms of the tension blob model taking into account counterions and salt ions implicitly by the Debye–Hückel model. Our studies reveal a strong dependence of the amount of ions absorbed in the interior of the microgel on the electrostatic interaction strength, which is related to the degree of the gel swelling. This implies a dependence of the inverse Debye screening length κ on the ion concentration; we find a power-law increase of κ with the Coulomb interaction strength with the exponent 3/5 for a salt-free microgel and an exponent 1/2 for moderate salt concentrations. Additionally, the radial dependence of polymer conformations and ion distributions is addressed.

Biopolymer microencapsulations of Bacillus thuringiensis crystal preparations for increased stability and resistance to environmental stress

Parasporal crystals synthesized by Bacillus thuringiensis (Bt) have been widely used as microbial pesticides because of their toxicity to the larval stages of specific insects. However, parasporal crystals can be damaged by environmental stresses, such as high temperature, ultraviolet radiation, and desiccation. To reduce environmental susceptibility of parasporal crystals and extend the duration of their activity, we developed a new type of protection by making microcapsules of crystals (MCs). The microcapsules were self-assembled by alternate deposition (layer by layer) of low-cost chitosan and sodium alginate (or sodium carboxymethyl cellulose) on the crystal surface. Crystal toxins (Cry1Ac) were released from microcapsules at pH values above 9.0. Bioassay results demonstrated that microencapsulated preparations had larvicidal toxicity equivalent to the non-encapsulated form. Microencapsuled crystals were protected from environmental stresses such as high temperature and desiccation. The results indicate that microcapsule protection can enhance the efficacy of Bt in pest control, especially to Lepidoptera larvae that have a alkaline midgut.

Shaped stimuli-responsive hydrogel particles: syntheses, properties and biological responses

This review summarizes a pool of current experimental approaches and discusses perspectives in the development of the synergistic combination of shape and stimuli-response in particulate hydrogels.

Light-Responsive Polymer Micro- and Nano-Capsules

A significant amount of academic and industrial research efforts are devoted to the encapsulation of active substances within micro- or nanocarriers. The ultimate goal of core–shell systems is the protection of the encapsulated substance from the environment, and its controlled and targeted release. This can be accomplished by employing “stimuli-responsive” materials as constituents of the capsule shell. Among a wide range of factors that induce the release of the core material, we focus herein on the light stimulus. In polymers, this feature can be achieved introducing a photo-sensitive segment, whose activation leads to either rupture or modification of the diffusive properties of the capsule shell, allowing the delivery of the encapsulated material. Micro- and nano-encapsulation techniques are constantly spreading towards wider application fields, and many different active molecules have been encapsulated, such as additives for food-packaging, pesticides, dyes, pharmaceutics, fragrances and flavors or cosmetics. Herein, a review on the latest and most challenging polymer-based micro- and nano-sized hollow carriers exhibiting a light-responsive release behavior is presented. A special focus is put on systems activated by wavelengths less harmful for living organisms (mainly in the ultraviolet, visible and infrared range), as well as on different preparation techniques, namely liposomes, self-assembly, layer-by-layer, and interfacial polymerization.

Mesenchymal Stem Cell Magnetization: Magnetic Multilayer Microcapsule Uptake, Toxicity, Impact on Functional Properties, and Perspectives for Magnetic Delivery

Mesenchymal stem cells (MSCs) are widely used in cell therapy due to their convenience, multiline differentiation potential, reproducible protocols, and biological properties. The potential of MSCs to impregnate magnetic microcapsules and their possible influence on cell function and ability to response to magnetic field have been explored. Interestingly, the cells suspended in media show much higher ability in internalization of microcapsules, then MSCs adhere into the surface. There is no significant effect of microcapsules on cell toxicity compared with other cell line-capsule internalization reported in literature. Due to internalization of magnetic capsules by the cells, such cell engineering platform is responsive to external magnetic field, which allows to manipulate MSC migration. Magnetically sorted MSCs are capable to differentiation as confirmed by their conversion to adipogenic and osteogenic cells using standard protocols. There is a minor effect of capsule internalization on cell adhesion, though MSCs are still able to form spheroid made by dozen of thousand MSCs. This work demonstrates the potential of use of microcapsule impregnated MSCs to carry internalized micron-sized vesicles and being navigated with external magnetic signaling.

Nanoshell Assembly for Magnet-Responsive Oil-Degrading Bacteria

The modified polyelectrolyte-magnetite nanocoating was applied to functionalize the cell walls of oil decomposing bacteria Alcanivorax borkumensis. Cationic coacervate of poly(allylamine) and 20 nm iron oxide nanoparticles allowed for a rapid single-step encapsulation process exploiting electrostatic interaction with bacteria surfaces. The bacteria were covered with rough 70-100-nm-thick shells of magnetite loosely bound to the surface through polycations. This encapsulation allowed for external manipulations of A. borkumensis with magnetic field, as demonstrated by magnetically facilitated cell displacement on the agar substrate. Magnetic coating was naturally removed after multiple cell proliferations providing next generations of the cell in the native nonmagnetic form. The discharged biosurfactant vesicles indicating the bacterial functionality (150 ± 50 nm lipid micelles) were visualized with atomic force microscopy in the bacterial biofilms.

Innovation in Layer-by-Layer Assembly

Methods for depositing thin films are important in generating functional materials for diverse applications in a wide variety of fields. Over the last half-century, the layer-by-layer assembly of nanoscale films has received intense and growing interest. This has been fueled by innovation in the available materials and assembly technologies, as well as the film-characterization techniques. In this Review, we explore, discuss, and detail innovation in layer-by-layer assembly in terms of past and present developments, and we highlight how these might guide future advances. A particular focus is on conventional and early developments that have only recently regained interest in the layer-by-layer assembly field. We then review unconventional assemblies and approaches that have been gaining popularity, which include inorganic/organic hybrid materials, cells and tissues, and the use of stereocomplexation, patterning, and dip-pen lithography, to name a few. A relatively recent development is the use of layer-by-layer assembly materials and techniques to assemble films in a single continuous step. We name this "quasi"-layer-by-layer assembly and discuss the impacts and innovations surrounding this approach. Finally, the application of characterization methods to monitor and evaluate layer-by-layer assembly is discussed, as innovation in this area is often overlooked but is essential for development of the field. While we intend for this Review to be easily accessible and act as a guide to researchers new to layer-by-layer assembly, we also believe it will provide insight to current researchers in the field and help guide future developments and innovation.

Multitriggered Tumor-Responsive Drug Delivery Vehicles Based on Protein and Polypeptide Coassembly for Enhanced Photodynamic Tumor Ablation

Tumor-responsive nanocarriers are highly valuable and demanded for smart drug delivery particularly in the field of photodynamic therapy (PDT), where a quick release of photosensitizers in tumors is preferred. Herein, it is demonstrated that protein-based nanospheres, prepared by the electrostatic assembly of proteins and polypeptides with intermolecular disulfide cross-linking and surface polyethylene glycol coupling, can be used as versatile tumor-responsive drug delivery vehicles for effective PDT. These nanospheres are capable of encapsulation of various photosensitizers including Chlorin e6 (Ce6), protoporphyrin IX, and verteporfin. The Chlorin e6-encapsulated nanospheres (Ce6-Ns) are responsive to changes in pH, redox potential, and proteinase concentration, resulting in multitriggered rapid release of Ce6 in an environment mimicking tumor tissues. In vivo fluorescence imaging results indicate that Ce6-Ns selectively accumulate near tumors and the quick release of Ce6 from Ce6-Ns can be triggered by tumors. In tumors the fluorescence of released Ce6 from Ce6-Ns is observed at 0.5 h postinjection, while in normal tissues the fluorescence appeared at 12 h postinjection. Tumor ablation is demonstrated by in vivo PDT using Ce6-Ns and the biocompatibility of Ce6-Ns is evident from the histopathology imaging, confirming the enhanced in vivo PDT efficacy and the biocompatibility of the assembled drug delivery vehicles.

A block copolymer-templated construction approach for the creation of nano-patterned polyelectrolyte multilayers and nanoscale objects

A block copolymer-based assembly approach for the creation of nano-patterned polyelectrolyte multilayers over cm²-scale areas is presented. Up to 5 bi-layers were selectively assembled on top of specific nano-domains featuring different morphologies. The successful isolation of nanoscale objects corresponding in shape to the template features is also demonstrated. This methodology is applicable to different types of polyelectrolytes, and opens up a new dimension for layer-by-layer construction.

Probing the Molecular Ordering and Thermal Stability of Azopolymer Layer-by-Layer Films by Second-Harmonic Generation

Polyelectrolyte layer-by-layer (LbL) films have many applications, but several parameters and procedures during film fabrication determine their morphology and molecular arrangement, with important practical consequences. Here we have used optical second-harmonic generation (SHG) to investigate the molecular ordering of LbL films containing the anionic azopolymer PS-119 and the cationic polyelectrolyte PAH. We show that spontaneous drying leads to laterally homogeneous and isotropic films, while the opposite occurs for nitrogen-flow drying. The effect of film thickness and pH of the assembling/rinsing solutions on the molecular ordering was also investigated. The optical nonlinearity tends to significantly decrease for thicker films (∼10 bilayers), and a slight alternation of SHG intensity for films with odd or even number of layers (complete vs incomplete bilayers) was also observed, which results from the reorientation of azopolymer groups in the last layer after adsorption of an additional PAH layer. We propose a qualitative electrostatic model to explain the pH dependence of film growth and azopolymer orientation, which is based on changes of the charge density of the substrate and PAH and on different ionic screening of electrostatic interactions at various pH values. We also found that the nonlinear response presents a gradual and significant reduction upon heating, which is inconsistent with a glass transition temperature for these ultrathin LbL films. The thermal stability is improved with a combination of low ionic strength and higher charge density of the polyelectrolytes and substrate, which promotes better interlayer complexation. The SHG signal is recovered upon cooling, although for some conditions the molecular arrangement became anisotropic after a heating/cooling cycle. Such detailed information about the structural order of thin nonlinear optical azopolymer LbL films demonstrates that SHG is a powerful technique to probe the film structure at the molecular level, with important consequences for their applications in optical devices.