Engineered protein scaffolds as next-generation antibody therapeutics

Site-specific PEGylation at histidine tags

The efficacy of protein-based medicines can be compromised by their rapid clearance from the blood circulatory system. Achieving optimal pharmacokinetics is a key requirement for the successful development of safe protein-based medicines. Protein PEGylation is a clinically proven strategy to increase the circulation half-life of protein-based medicines. One limitation of PEGylation is that there are few strategies that achieve site-specific conjugation of PEG to the protein. Here, we describe the covalent conjugation of PEG site-specifically to a polyhistidine tag (His-tag) on a protein. His-tag site-specific PEGylation was achieved with a domain antibody (dAb) that had a 6-histidine His-tag on the C-terminus (dAb-His(6)) and interferon α-2a (IFN) that had an 8-histidine His-tag on the N-terminus (His(8)-IFN). The site of PEGylation at the His-tag for both dAb-His(6)-PEG and PEG-His(8)-IFN was confirmed by digestion, chromatographic, and mass-spectral studies. A methionine was also inserted directly after the N-terminal His-tag in IFN to give His(8)Met-IFN. Cyanogen bromide digestion studies of PEG-His(8)Met-IFN were also consistent with PEGylation at the His-tag. By using increased stoichiometries of the PEGylation reagent, it was possible to conjugate two separate PEG molecules to the His-tag of both the dAb and IFN proteins. Stability studies followed by in vitro evaluation confirmed that these PEGylated proteins retained their biological activity. In vivo PK studies showed that all of the His-tag PEGylated samples displayed extended circulation half-lives. Together, our results indicate that site-specific, covalent PEG conjugation at a His-tag can be achieved and biological activity maintained with therapeutically relevant proteins.

Towards structure-based protein drug design

Structure-based drug design for chemical molecules has been widely used in drug discovery in the last 30 years. Many successful applications have been reported, especially in the field of virtual screening based on molecular docking. Recently, there has been much progress in fragment-based as well as de novo drug discovery. As many protein-protein interactions can be used as key targets for drug design, one of the solutions is to design protein drugs based directly on the protein complexes or the target structure. Compared with protein-ligand interactions, protein-protein interactions are more complicated and present more challenges for design. Over the last decade, both sampling efficiency and scoring accuracy of protein-protein docking have increased significantly. We have developed several strategies for structure-based protein drug design. A grafting strategy for key interaction residues has been developed and successfully applied in designing erythropoietin receptor-binding proteins. Similarly to small-molecule design, we also tested de novo protein-binder design and a virtual screen of protein binders using protein-protein docking calculations. In comparison with the development of structure-based small-molecule drug design, we believe that structure-based protein drug design has come of age.

Half-life extension of a single-chain diabody by fusion to domain B of staphylococcal protein A

Binding of a therapeutic protein to a long-circulating plasma protein can result in a strongly extended half-life. Among these plasma proteins, albumin and immunoglobulins are of special interest because of their exceptionally long half-life, which is to a great extent determined by recycling through the neonatal Fc receptor (FcRn). Many strategies have been established employing reversible binding to albumin, e.g. using an albumin-binding domain from streptococcal protein G. We show here that the half-life of a recombinant antibody molecule can also be prolonged by fusion to a single immunoglobulin-binding domain (IgBD) from staphylococcal protein A. This domain (domain B, SpA(B)) is composed of 56 amino acid residues and was fused to the C-terminus of a bispecific single-chain diabody (scDb). The scDb-SpA(B) fusion protein was produced in HEK293 cells and retained its antigen-binding activity as shown by enzyme-linked immunosorbent assay and flow cytometry. Furthermore, the fusion protein was capable of binding to human and mouse IgG in a pH-dependent manner. In mice, the terminal half-life of the fusion protein was improved from ∼1-2 h of the unmodified scDb to 11.8 h. Although the fusion protein did not reach the long half-life seen for IgG, our results established the applicability of a single bacterial IgBD for half-life extension purposes.

Biochemical and biosynthetic preparation of natural product-like cyclic peptide libraries

Natural product gene clusters are increasingly being used to compliment biochemical methods for production of cyclic peptide libraries.

Modulating antibody pharmacokinetics using hydrophilic polymers

INTRODUCTION

The use of hydrophilic polymers as a substitute for the Fc-domain in immuno- or non-immuno-based binding proteins is accelerating. Chemical PEGylation has led the way and is still the most advanced and clinically-approved approach. Hydrophilic polymers act by maintaining a flexible conformation and hydrogen bonding to a network of water molecules to acquire a larger hydrodynamic volume and apparent mass than their actual molecular mass suggest. The benefits are increased blood half-life and bioavailability, stability and reduced immunogenicity. In the case of PEG, there is also evidence of enhanced targeting and reduced side effects, but drawbacks include the fact that PEG is non-biodegradable.

AREAS COVERED

This report reviews the state of the art for antibody PEGylation in terms of approaches and effects. Additionally, non-biological (such as N-(2-hydroxypropyl)methacrylamide) and potentially superior biological alternatives (such as polysialylation) are described, ending with recombinant approaches (such as hydrophilic peptides and glyco-engineering), which promise to circumvent the need for chemical modification altogether.

EXPERT OPINION

The emergence of many small, antibody fragment-like mimics will drive the need for such technologies, and PEGylation is still the choice polymer due to its established use and track record. However, there will be a place for many alternative technologies if they can match the pharmacokinetics of PEG-conjugates and bring addition beneficial features such as easier production.

Isolation of monobodies that bind specifically to the SH3 domain of the Fyn tyrosine protein kinase

Fyn is a nonreceptor protein tyrosine kinase that belongs to a highly conserved kinase family, Src family kinases. Fyn plays an important role in inflammatory processes and neuronal functions. To generate a synthetic affinity reagent that can be used to probe Fyn, a phage-display library of fibronectin type III monobodies was affinity selected with the Src Homology 3 (SH3) domain of Fyn and three binders were isolated. One of the three binders, G9, is specific in binding to the SH3 domain of Fyn, but not to the other members of the Src family (i.e. Blk, Fgr, Hck, Lck, Lyn, Src and Yes), even though they share 51-81% amino acid identity. The other two bind principally to the Fyn SH3 domain, with some cross-reactivity to the Yes SH3 domain. The G9 binder has a dissociation constant of 166±6nM, as measured by isothermal titration calorimetry, and binds only to the Fyn SH3 domain out of 150 human SH3 domains examined in an array. Interestingly, although the G9 monobody lacks proline in its randomized BC and FG loops, it binds at the same site on the SH3 domain as proline-rich ligands, as revealed by competition assays. The G9 monobody, identified in this study, may be used as a highly selective probe for detecting and purifying cellular Fyn kinase.

Ribosome display selection of a murine IgG₁ Fab binding affibody molecule allowing species selective recovery of monoclonal antibodies

Affinity reagents recognizing constant parts of antibody molecules are invaluable tools in immunotechnology applications, including purification, immobilization, and detection of immunoglobulins. In this article, murine IgG₁, the primary isotype of monoclonal antibodies (mAbs) was used as target for selection of novel binders from a combinatorial ribosome display (RD) library of 10¹¹ affibody molecules. Four rounds of selection using three different mouse IgG₁ mAbs as alternating targets resulted in the identification of binders with broad mIgG₁ recognition and dissociation constants (K_D) in the low nanomolar to low micromolar range. For one of the binders, denoted Z_mab25, competition in binding to full length mIgG₁ by a streptococcal protein G (SPG) fragment and selective affinity capture of mouse IgG₁ Fab fragments after papain cleavage of a full mAb suggest that an epitope functionally overlapping with the SPG-binding site in the CH₁ domain of mouse IgG₁ had been addressed. Interestingly, biosensor-based binding experiments showed that neither human IgG₁ nor bovine Ig, the latter present in fetal bovine serum (FBS) was recognized by Z_mab25. This selective binding profile towards murine IgG₁ was successfully exploited in species selective recovery of two different mouse mAbs from complex samples containing FBS, resembling a hybridoma culture supernatant.

The gain in brain: novel imaging techniques and multiplexed proteomic imaging of brain tissue ultrastructure

The rapid accumulation of neuroproteomics data in recent years has prompted the emergence of novel antibody-based imaging methods that aim to understand the anatomical and functional context of the multitude of identified proteins. The pioneering field of ultrastructural multiplexed proteomic imaging now includes a number of high resolution methods, such as array tomography, stimulated emission depletion microscopy, stochastic optical reconstruction microscopy and automated transmission electron microscopy, which allow a detailed molecular characterization of individual synapses and subsynaptic structures within brain tissues for the first time. While all of these methods still face considerable limitations, a combined complementary approach building on the respective strengths of each method is possible and will enable fascinating research into the proteomic diversity of the nervous system.

Bridging the gap: facilities and technologies for development of early stage therapeutic mAb candidates

Therapeutic monoclonal antibodies (mAbs) currently dominate the biologics marketplace. Development of a new therapeutic mAb candidate is a complex, multistep process and early stages of development typically begin in an academic research environment. Recently, a number of facilities and initiatives have been launched to aid researchers along this difficult path and facilitate progression of the next mAb blockbuster. Complementing this, there has been a renewed interest from the pharmaceutical industry to reconnect with academia in order to boost dwindling pipelines and encourage innovation. In this review, we examine the steps required to take a therapeutic mAb from discovery through early stage preclinical development and toward becoming a feasible clinical candidate. Discussion of the technologies used for mAb discovery, production in mammalian cells and innovations in single-use bioprocessing is included. We also examine regulatory requirements for product quality and characterization that should be considered at the earliest stages of mAb development. We provide details on the facilities available to help researchers and small-biotech build value into early stage product development, and include examples from within our own facility of how technologies are utilized and an analysis of our client base.

Anti-tumor effect of CT-322 as an adnectin inhibitor of vascular endothelial growth factor receptor-2

CT-322 is a new anti-angiogenic therapeutic agent based on an engineered variant of the tenth type III domain of human fibronectin, i.e., an Adnectin™, designed to inhibit vascular endothelial growth factor receptor (VEGFR)-2. This PE Gylated Adnectin was developed using an mRNA display technology. CT-322 bound human VEGFR-2 with high affinity (K(D), 11 nM), but did not bind VEGFR-1 or VEGFR-3 at concentrations up to 100 nM, as determined by surface plasmon resonance studies. Western blot analysis showed that CT-322 blocked VEGF-induced phosphorylation of VEGFR-2 and mitogen-activated protein kinase in human umbilical vascular endothelial cells. CT-322 significantly inhibited the growth of human tumor xenograft models of colon carcinoma and glioblastoma at doses of 15-60 mg/kg administered 3 times/week. Anti-tumor effects of CT-322 were comparable to those of sorafenib or sunitinib, which inhibit multiple kinases, in a colon carcinoma xenograft model, although CT-322 caused less overt adverse effects than the kinase inhibitors. CT-322 also enhanced the anti-tumor activity of the chemotherapeutic agent temsirolimus in the colon carcinoma model. The high affinity and specificity of CT-322 binding to VEGFR-2 and its anti-tumor activities establish CT-322 as a promising anti-angiogenic therapeutic agent. Our results further suggest that Adnectins are an important new class of targeted biologics that can be developed as potential treatments for a wide variety of diseases.

SNAP dendrimers: multivalent protein display on dendrimer-like DNA for directed evolution

Display systems connect a protein with the DNA encoding it. Such systems (e.g., phage or ribosome display) have found widespread application in the directed evolution of protein binders and constitute a key element of the biotechnological toolkit. In this proof-of-concept study we describe the construction of a system that allows the display of multiple copies of a protein of interest in order to take advantage of avidity effects during affinity panning. To this end, dendrimer-like DNA is used as a scaffold with docking points that can join the coding DNA with multiple protein copies. Each DNA construct is compartmentalised in water-in-oil emulsion droplets. The corresponding protein is expressed, in vitro, inside the droplets as a SNAP-tag fusion. The covalent bond between DNA and the SNAP-tag is created by reaction with dendrimer-bound benzylguanine (BG). The ability to form dendrimer-like DNA straightforwardly from oligonucleotides bearing BG allowed the comparison of a series of templates differing in size, valency and position of BG. In model selections the most efficient constructs show recoveries of up to 0.86 % and up to 400-fold enrichments. The comparison of mono- and multivalent constructs suggests that the avidity effect enhances enrichment by up to fivefold and recovery by up to 25-fold. Our data establish a multivalent format for SNAP-display based on dendrimer-like DNA as the first in vitro display system with defined tailor-made valencies and explore a new application for DNA nanostructures. These data suggest that multivalent SNAP dendrimers have the potential to facilitate the selection of protein binders especially during early rounds of directed evolution, allowing a larger diversity of candidate binders to be recovered.

Biotechnological applications of recombinant single-domain antibody fragments

BACKGROUND

Single-domain antibody fragments possess structural features, such as a small dimension, an elevated stability, and the singularity of recognizing epitopes non-accessible for conventional antibodies that make them interesting for several research and biotechnological applications.

RESULTS

The discovery of the single-domain antibody's potentials has stimulated their use in an increasing variety of fields. The rapid accumulation of articles describing new applications and further developments of established approaches has made it, therefore, necessary to update the previous reviews with a new and more complete summary of the topic.

CONCLUSIONS

Beside the necessary task of updating, this work analyses in detail some applicative aspects of the single-domain antibodies that have been overseen in the past, such as their efficacy in affinity chromatography, as co-crystallization chaperones, protein aggregation controllers, enzyme activity tuners, and the specificities of the unconventional single-domain fragments.

Modification of the loops in the ligand-binding site turns avidin into a steroid-binding protein

Background

Engineered proteins, with non-immunoglobulin scaffolds, have become an important alternative to antibodies in many biotechnical and therapeutic applications. When compared to antibodies, tailored proteins may provide advantageous properties such as a smaller size or a more stable structure.

Results

Avidin is a widely used protein in biomedicine and biotechnology. To tailor the binding properties of avidin, we have designed a sequence-randomized avidin library with mutagenesis focused at the loop area of the binding site. Selection from the generated library led to the isolation of a steroid-binding avidin mutant (sbAvd-1) showing micromolar affinity towards testosterone (K_d ~ 9 μM). Furthermore, a gene library based on the sbAvd-1 gene was created by randomizing the loop area between β-strands 3 and 4. Phage display selection from this library led to the isolation of a steroid-binding protein with significantly decreased biotin binding affinity compared to sbAvd-1. Importantly, differential scanning calorimetry and analytical gel-filtration revealed that the high stability and the tetrameric structure were preserved in these engineered avidins.

Conclusions

The high stability and structural properties of avidin make it an attractive molecule for the engineering of novel receptors. This methodology may allow the use of avidin as a universal scaffold in the development of novel receptors for small molecules.

Structure-function studies of an engineered scaffold protein derived from Stefin A. II: Development and applications of the SQT variant

Constrained binding peptides (peptide aptamers) may serve as tools to explore protein conformations and disrupt protein-protein interactions. The quality of the protein scaffold, by which the binding peptide is constrained and presented, is of crucial importance. SQT (Stefin A Quadruple Mutant-Tracy) is our most recent development in the Stefin A-derived scaffold series. Stefin A naturally uses three surfaces to interact with its targets. SQT tolerates peptide insertions at all three positions. Peptide aptamers in the SQT scaffold can be expressed in bacterial, yeast and human cells, and displayed as a fusion to truncated pIII on phage. Peptides that bind to CDK2 can show improved binding in protein microarrays when presented by the SQT scaffold. Yeast two-hybrid libraries have been screened for binders to the POZ domain of BCL-6 and to a peptide derived from PBP2', specific to methicillin-resistant Staphylococcus aureus. Presentation of the Noxa BH3 helix by SQT allows specific interaction with Mcl-1 in human cells. Together, our results show that Stefin A-derived scaffolds, including SQT, can be used for a variety of applications in cellular and molecular biology. We will henceforth refer to Stefin A-derived engineered proteins as Scannins.

Clinical significance of interleukin (IL)-6 in cancer metastasis to bone: potential of anti-IL-6 therapies

Metastatic events to the bone occur frequently in numerous cancer types such as breast, prostate, lung, and renal carcinomas, melanoma, neuroblastoma, and multiple myeloma. Accumulating evidence suggests that the inflammatory cytokine interleukin (IL)-6 is frequently upregulated and is implicated in the ability of cancer cells to metastasize to bone. IL-6 is able to activate various cell signaling cascades that include the STAT (signal transducer and activator of transcription) pathway, the PI3K (phosphatidylinositol-3 kinase) pathway, and the MAPK (mitogen-activated protein kinase) pathway. Activation of these pathways may explain the ability of IL-6 to mediate various aspects of normal and pathogenic bone remodeling, inflammation, cell survival, proliferation, and pro-tumorigenic effects. This review article will discuss the role of IL-6: 1) in bone metabolism, 2) in cancer metastasis to bone, 3) in cancer prognosis, and 4) as potential therapies for metastatic bone cancer.

Development and characterization of a potent immunoconjugate targeting the Fn14 receptor on solid tumor cells

TNF-like weak inducer of apoptosis (TWEAK) and fibroblast growth factor (FGF)-inducible 14 (Fn14) are a TNF superfamily ligand-receptor pair involved in many cellular processes including proliferation, migration, differentiation, inflammation, and angiogenesis. The Fn14 receptor is expressed at relatively low levels in normal tissues, but it is known to be dramatically elevated in a number of tumor types, including brain and breast tumors. Thus, it seems to be an excellent candidate for therapeutic intervention. We first analyzed Fn14 expression in human tumor cell lines. Fn14 was expressed in a variety of lines including breast, brain, bladder, skin, lung, ovarian, pancreatic, colon, prostate, and cervical cancer cell lines. We then developed an immunoconjugate containing a high-affinity anti-Fn14 monoclonal antibody (ITEM-4) conjugated to recombinant gelonin (rGel), a highly cytotoxic ribosome-inactivating N-glycosidase. Both ITEM-4 and the conjugate were found to bind to cells to an equivalent extent. Confocal microscopic analysis showed that ITEM4-rGel specifically and rapidly (within 2 hours) internalized into Fn14-positive T-24 bladder cancer cells but not into Fn14-deficient mouse embryonic fibroblasts. Cytotoxicity studies against 22 different tumor cell lines showed that ITEM4-rGel was highly cytotoxic to Fn14-expressing cells and was 8- to 8 × 10(4)-fold more potent than free rGel. ITEM4-rGel was found to kill cells by inducing apoptosis with high-mobility group box 1 protein release. Finally, ITEM4-rGel immunoconjugate administration promoted long-term tumor growth suppression in nude mice bearing T-24 human bladder cancer cell xenografts. Our data support the use of an antibody-drug conjugate approach to selectively target and inhibit the growth of Fn14-expressing tumors.

Intellectual property protection: strategies for antibody inventions

In the last decade, therapeutic antibodies have become one of the commercially most successful classes of biopharmaceutical drugs. Major drug manufacturers who have successfully managed to occupy this new market, as well as biotechnology firms, some of which have experienced a quick growth and are now on par with the former, owe part of their success to suitable intellectual property strategies. This article provides an overview of the current thinking on antibody-related patents, and discusses strategies for protecting the antibody products of the future.

Highly stable binding proteins derived from the hyperthermophilic Sso7d scaffold

We have shown that highly stable binding proteins for a wide spectrum of targets can be generated through mutagenesis of the Sso7d protein from the hyperthermophilic archaeon Sulfolobus solfataricus. Sso7d is a small (~7 kDa, 63 amino acids) DNA-binding protein that lacks cysteine residues and has a melting temperature of nearly 100 °C. We generated a library of 10(8) Sso7d mutants by randomizing 10 amino acid residues on the DNA-binding surface of Sso7d, using yeast surface display. Binding proteins for a diverse set of model targets could be isolated from this library; our chosen targets included a small organic molecule (fluorescein), a 12 amino acid peptide fragment from the C-terminus of β-catenin, the model proteins hen egg lysozyme and streptavidin, and immunoglobulins from chicken and mouse. Without the application of any affinity maturation strategy, the binding proteins isolated had equilibrium dissociation constants in the nanomolar to micromolar range. Further, Sso7d-derived binding proteins could discriminate between closely related immunoglobulins. Mutant proteins based on Sso7d were expressed at high yields in the Escherichia coli cytoplasm. Despite extensive mutagenesis, Sso7d mutants have high thermal stability; five of six mutants analyzed have melting temperatures >89 °C. They are also resistant to chemical denaturation by guanidine hydrochloride and retain their secondary structure after extended incubation at extreme pH values. Because of their favorable properties, such as ease of recombinant expression, and high thermal, chemical and pH stability, Sso7d-derived binding proteins will have wide applicability in several areas of biotechnology and medicine.

Single-chain Fv fragment antibodies selected from an intrabody library as effective mono- or bivalent reagents for in vitro protein detection

In spite of their many potential applications, recombinant antibody molecules selected by phage display are rarely available commercially, one reason being the absence of robust bacterial expression systems that yield sufficient quantities of reagents for routine applications. We previously described the construction and validation of an intrabody library that allows the selection of single-chain Fv (scFv) fragments solubly expressed in the cytoplasm. Here, we show that it is possible to obtain monomeric scFvs binding specifically to human papillomavirus type 16 E6 and cellular gankyrin oncoproteins in quantities higher than 0.5 g/L of shake-flask culture in E. coli cytoplasm after auto-induction. In addition, stable bivalent scFvs of increased avidity were produced by tagging the scFvs with the dimeric glutathione-S-transferase enzyme (GST). These minibody-like molecules were further engineered by fusion with green fluorescent protein (GFPuv), leading to high yield of functional bivalent fluorescent antibody fragments. Our results demonstrate that scFvs selected from an intrabody library can be engineered into cost-effective bivalent reagents suitable for many biomedical and industrial applications.

Peptide aptamer microarrays: bridging the bio-detector interface

In the near future, personalised medicine and phase-0 trials will require that clinical practitioners move from the "one biomarker per disease" paradigm to the use of molecular signatures of disease for diagnosis and the prediction of a patient's response to treatment. These signatures will be composed of biomarkers specific to the disease, and will include over-expression of normal protein from a gene that does not carry a mutation; loss of expression of an essential protein; expression of a protein from a mutant gene; and metabolites whose levels are altered in disease. Surrogates for protein expression, such as alterations in the messenger RNA that encode for them, have already proved their value. The next challenge, then, in clinical biosensing is to enable the multiplexed detection of protein biomarkers, and perhaps the multiplexed detection of mixed biomarkers (metabolites, RNA and proteins) all in a single test. Given the plethora of available antibodies specific for biomarkers, why is this not already happening? We believe that the limitation lies in the nature of the antibody molecule itself, and especially the fact that antibodies have evolved to function in solution, while most diagnostic tests take place at a surface. We have accordingly turned to the design of alternative antibodies, and have identified a protein that appears to be unusually stable on surfaces. The new, non-antibody, scaffold protein is derived from human Stefin A, a natural inhibitor of the cathepsin family of proteases. We have engineered this protein so that it lacks natural binding partners, and introduced a series of new binding surfaces through randomisation or directed replacement of the surfaces used by Stefin A to bind to cathepsins. Our new probes show exquisite specificity and binding affinities comparable to antibodies, and can be used to probe biology in intact cells. More importantly, together and in collaboration with other groups in Chemistry or Engineering Departments, we have shown that these designer proteins can be used in optical detection of labelled target proteins from whole cell lysates in a highly multiplexed microarray format, as well as in label-free detection of unlabelled proteins using surface plasmon resonance, QCM, microcantilevers and using electrochemical assays on gold electrodes. We believe that the combination of optimised surface chemistry, robust and combinatorial designer biological probes and novel, robust and sensitive detection technologies will enable, in the near future, the introduction of multiplexed biomarker detection in the clinical setting, most likely in cancer where multiple biomarkers are known, but probes are still lacking.

It's all in the crystals…

Macromolecular crystallography relies on the availability and quality of single crystals; these are typically obtained through extensive screening, which has a very low intrinsic success rate. Crystallization is not a completely stochastic process and many proteins do not succumb to crystallization because of specific microscopic features of their molecular surfaces. It follows that rational surface engineering through site-directed mutagenesis should allow a systematic and significant improvement in crystallization success rates. Here, one such established strategy, surface-entropy reduction (SER), is discussed, including its successes, limitations and possible future developments.

Introduction to current and future protein therapeutics: a protein engineering perspective

Protein therapeutics and its enabling sister discipline, protein engineering, have emerged since the early 1980s. The first protein therapeutics were recombinant versions of natural proteins. Proteins purposefully modified to increase their clinical potential soon followed with enhancements derived from protein or glycoengineering, Fc fusion or conjugation to polyethylene glycol. Antibody-based drugs subsequently arose as the largest and fastest growing class of protein therapeutics. The rationale for developing better protein therapeutics with enhanced efficacy, greater safety, reduced immunogenicity or improved delivery comes from the convergence of clinical, scientific, technological and commercial drivers that have identified unmet needs and provided strategies to address them. Future protein drugs seem likely to be more extensively engineered to improve their performance, e.g., antibodies and Fc fusion proteins with enhanced effector functions or extended half-life. Two old concepts for improving antibodies, namely antibody-drug conjugates and bispecific antibodies, have advanced to the cusp of clinical success. As for newer protein therapeutic platform technologies, several engineered protein scaffolds are in early clinical development and offer differences and some potential advantages over antibodies.

The structure of a truncated phosphoribosylanthranilate isomerase suggests a unified model for evolution of the (βα)8 barrel fold

The (βα)(8) barrel is one of the most common protein folds, and enzymes with this architecture display a remarkable range of catalytic activities. Many of these functions are associated with ancient metabolic pathways, and phylogenetic reconstructions suggest that the (βα)(8) barrel was one of the very first protein folds to emerge. Consequently, there is considerable interest in understanding the evolutionary processes that gave rise to this fold. In particular, much attention has been focused on the plausibility of (βα)(8) barrel evolution from homodimers of half barrels. However, we previously isolated a three-quarter-barrel-sized fragment of a (βα)(8) barrel, termed truncated phosphoribosylanthranilate isomerase (trPRAI), that is soluble and almost as thermostable as full-length N-(5'-phosphoribosyl)anthranilate isomerase (PRAI). Here, we report the NMR-derived structure of trPRAI. The subdomain is monomeric, is well ordered and adopts a native-like structure in solution. Side chains from strands β(1) (Glu3 and Lys5), β(2) (Tyr25) and β(6) (Lys122) of trPRAI repack to shield the hydrophobic core from the solvent. This result demonstrates that three-quarter barrels were viable intermediates in the evolution of the (βα)(8) barrel fold. We propose a unified model for (βα)(8) barrel evolution that combines our data, previously published work and plausible scenarios for the emergence of (initially error-prone) genetic systems. In this model, the earliest proto-cells contained diverse pools of part-barrel subdomains. Combinatorial assembly of these subdomains gave rise to many distinct lineages of (βα)(8) barrel proteins, that is, our model excludes the possibility that there was a single (βα)(8) barrel from which all present examples are descended.

Spatially addressable chemoselective C-terminal ligation of an intein fusion protein from a complex mixture to a hydrazine-terminated surface

Protein immobilization on surfaces is useful in many areas of research, including biological characterization, antibody purification, and clinical diagnostics. A critical limitation in the development of protein microarrays and heterogeneous protein-based assays is the enormous amount of work and associated costs in the purification of proteins prior to their immobilization onto a surface. Methods to address this problem would simplify the development of interfacial diagnostics that use a protein as the recognition element. Herein, we describe an approach for the facile, site-specific immobilization of proteins on a surface without any preprocessing or sample purification steps that ligates an intein fusion protein at its C-terminus by reaction with a hydrazine group presented by a surface. Furthermore, we demonstrate that this methodology can directly immobilize a protein directly from cell lysate onto a protein-resistant surface. This methodology is also compatible with soft lithography and inkjet printing so that one or more proteins can be patterned on a surface without the need for purification.

Computational design of peptide ligands

Peptides possess several attractive features when compared to small molecule and protein therapeutics, such as high structural compatibility with target proteins, the ability to disrupt protein-protein interfaces, and small size. Efficient design of high-affinity peptide ligands via rational methods has been a major obstacle to the development of this potential drug class. However, structural insights into the architecture of protein-peptide interfaces have recently culminated in several computational approaches for the rational design of peptides that target proteins. These methods provide a valuable alternative to experimental high-resolution structures of target protein-peptide complexes, bringing closer the dream of in silico designed peptides for therapeutic applications.

Computational design of protein-ligand interfaces: potential in therapeutic development

Computational design of protein-ligand interfaces finds optimal amino acid sequences within a small-molecule binding site of a protein for tight binding of a specific small molecule. It requires a search algorithm that can rapidly sample the vast sequence and conformational space, and a scoring function that can identify low energy designs. This review focuses on recent advances in computational design methods and their application to protein-small molecule binding sites. Strategies for increasing affinity, altering specificity, creating broad-spectrum binding, and building novel enzymes from scratch are described. Future prospects for applications in drug development are discussed, including limitations that will need to be overcome to achieve computational design of protein therapeutics with novel modes of action.

Adnectins: engineered target-binding protein therapeutics

Adnectins™ are a new family of therapeutic proteins based on the 10th fibronectin type III domain, and designed to bind with high affinity and specificity to therapeutically relevant targets. Adnectins share with antibody variable domains a beta-sheet sandwich fold with diversified loops, but differ from antibodies in primary sequence and have a simpler, single-domain structure without disulfide bonds. As a consequence, Adnectins bind targets with affinity and specificity as high as those of antibodies, but are easier to manipulate genetically and compatible with bacterial expression systems. Adnectins that bind macromolecular targets with nanomolar and picomolar affinity have been selected using in vitro evolution methods, including mRNA display, phage display and yeast display. CT-322, a PEGylated, anti-angiogenic Adnectin that binds vascular endothelial growth factor (VEGF) receptor 2 and blocks its interaction with VEGF A, C and D, is being evaluated in Phase II clinical trials for efficacy in several oncology indications.

Combining phage and staphylococcal surface display for generation of ErbB3-specific Affibody molecules

Emerging evidence suggests that the catalytically inactive ErbB3 (HER3) protein plays a fundamental role in normal tyrosine kinase receptor signaling as well as in aberrant functioning of these signaling pathways, resulting in several forms of human cancers. ErbB3 has recently also been implicated in resistance to ErbB2-targeting therapies. Here we report the generation of high-affinity ErbB3-specific Affibody molecules intended for future molecular imaging and biotherapeutic applications. Using a high-complexity phage-displayed Affibody library, a number of ErbB3 binders were isolated and specific cell-binding activity was demonstrated in immunofluorescence microscopic studies. Subsequently, a second-generation library was constructed based on sequences of the candidates from the phage display selection. By exploiting the sensitive affinity discrimination capacity of a novel bacterial surface display technology, the affinity of candidate Affibody molecules was further increased down to subnanomolar affinity. In summary, the demonstrated specific targeting of native ErbB3 receptor on human cancer cell lines as well as competition with the heregulin/ErbB3 interaction indicates that these novel biological agents may become useful tools for diagnostic and therapeutic targeting of ErbB3-expressing cancers. Our studies also highlight the powerful approach of combining the advantages of different display technologies for generation of functional high-affinity protein-based binders. Potential future applications, such as radionuclide-based diagnosis and treatment of human cancers are discussed.

B-cell display-based one-step method to generate chimeric human IgG monoclonal antibodies

The recent development of screening strategies based on the generation and display of large libraries of antibody fragments has allowed considerable advances for the in vitro isolation of monoclonal antibodies (mAbs). We previously developed a technology referred to as the ‘ADLib (Autonomously Diversifying Library) system’, which allows the rapid screening and isolation in vitro of antigen-specific monoclonal antibodies (mAbs) from libraries of immunoglobulin M (IgM) displayed by the chicken B-cell line DT40. Here, we report a novel application of the ADLib system to the production of chimeric human mAbs. We have designed gene knock-in constructs to generate DT40 strains that coexpress chimeric human IgG and chicken IgM via B-cell-specific RNA alternative splicing. We demonstrate that the application of the ADLib system to these strains allows the one-step selection of antigen-specific human chimeric IgG. In addition, the production of chimeric IgG can be selectively increased when we modulate RNA processing by overexpressing the polyadenylation factor CstF-64. This method provides a new way to efficiently design mAbs suitable for a wide range of purposes including antibody therapy.

Improved cancer therapy and molecular imaging with multivalent, multispecific antibodies

Antibodies are highly versatile proteins with the ability to be used to target diverse compounds, such as radionuclides for imaging and therapy, or drugs and toxins for therapy, but also can be used unconjugated to elicit therapeutically beneficial responses, usually with minimal toxicity. This update describes a new procedure for forming multivalent and/or multispecific proteins, known as the dock-and-lock (DNL) technique. Developed as a procedure for preparing bispecific antibodies capable of binding divalently to a tumor antigen and monovalently to a radiolabeled hapten-peptide for pretargeted imaging and therapy, this methodology has the flexibility to create a number of other biologic agents of therapeutic interest. A variety of constructs, based on anti-CD20 and CD22 antibodies, have been made, with results showing that multispecific antibodies have very different properties from the respective parental monospecific antibodies. The technique is not restricted to antibody combination, but other biologics, such as interferon-alpha2b, have been prepared. These types of constructs not only allow small biologics to be sustained in the blood longer, but also to be selectively targeted. Thus, DNL technology is a highly flexible platform that can be used to prepare many different types of agents that could further improve cancer detection and therapy.

By-passing in vitro screening--next generation sequencing technologies applied to antibody display and in silico candidate selection

In recent years, unprecedented DNA sequencing capacity provided by next generation sequencing (NGS) has revolutionized genomic research. Combining the Illumina sequencing platform and a scFv library designed to confine diversity to both CDR3, >1.9 × 10(7) sequences have been generated. This approach allowed for in depth analysis of the library's diversity, provided sequence information on virtually all scFv during selection for binding to two targets and a global view of these enrichment processes. Using the most frequent heavy chain CDR3 sequences, primers were designed to rescue scFv from the third selection round. Identification, based on sequence frequency, retrieved the most potent scFv and valuable candidates that were missed using classical in vitro screening. Thus, by combining NGS with display technologies, laborious and time consuming upfront screening can be by-passed or complemented and valuable insights into the selection process can be obtained to improve library design and understanding of antibody repertoires.

Antibody vectors for imaging

Noninvasive molecular imaging approaches include nuclear, optical, magnetic resonance imaging, computed tomography, ultrasound, and photoacoustic imaging, which require accumulation of a signal delivered by a probe at the target site. Monoclonal antibodies are high affinity molecules that can be used for specific, high signal delivery to cell surface molecules. However, their long circulation time in blood makes them unsuitable as imaging probes. Efforts to improve antibodies pharmacokinetics without compromising affinity and specificity have been made through protein engineering. Antibody variants that differ in antigen binding sites and size have been generated and evaluated as imaging probes to target tissues of interest. Fast clearing fragments, such as single-chain variable fragment (scFv; 25 kDa), with 1 antigen-binding site (monovalent) demonstrated low accumulation in tumors because of the low exposure time to the target. Using scFv as building block to produce larger, bivalent fragments, such as scFv dimers (diabodies, 50 kDa) and scFv-fusion proteins (80 kDa minibodies and 105 kDa scFv-Fc), resulted in higher tumor accumulation because of their longer residence time in blood. Imaging studies with these fragments after radiolabeling have demonstrated excellent, high-contrast images in gamma cameras and positron emission tomography scanners. Several studies have also investigated antibody fragments conjugated to fluorescence (near infrared dyes), bioluminescence (luciferases), and quantum dots for optical imaging and iron oxides nanoparticles for magnetic resonance imaging. However, these studies indicate that there are several factors that influence successful targeting and imaging. These include stability of the antibody fragment, the labeling chemistry (direct or indirect), whether critical residues are modified, the number of antigen expressed on the cell, and whether the target has a rapid recycling rate or internalizes upon binding. The preclinical data presented are compelling, and it is evident that antibody-based molecular imaging tracers will play an important future role in the diagnosis and management of cancer and other diseases.

Designed proteins to modulate cellular networks

A major challenge of protein design is to create useful new proteins that interact specifically with biological targets in living cells. Such binding modules have many potential applications, including the targeted perturbation of protein networks. As a general approach to create such modules, we designed a library with approximately 10(9) different binding specificities based on a small 3-tetratricopeptide repeat (TPR) motif framework. We employed a novel strategy, based on split GFP reassembly, to screen the library for modules with the desired binding specificity. Using this approach, we identified modules that bind tightly and specifically to Dss1, a small human protein that interacts with the tumor suppressor protein BRCA2. We showed that these modules also bind the yeast homologue of Dss1, Sem1. Furthermore, we demonstrated that these modules inhibit Sem1 activity in yeast. This strategy will be generally applicable to make novel genetically encoded tools for systems/synthetic biology applications.

Monoclonal antibodies: versatile platforms for cancer immunotherapy

Antibodies are important therapeutic agents for cancer. Recently, it has become clear that antibodies possess several clinically relevant mechanisms of action. Many clinically useful antibodies can manipulate tumour-related signalling. In addition, antibodies exhibit various immunomodulatory properties and, by directly activating or inhibiting molecules of the immune system, antibodies can promote the induction of antitumour immune responses. These immunomodulatory properties can form the basis for new cancer treatment strategies.

Strategies and challenges for the next generation of therapeutic antibodies

Antibodies and related products are the fastest growing class of therapeutic agents. By analysing the regulatory approvals of IgG-based biotherapeutic agents in the past 10 years, we can gain insights into the successful strategies used by pharmaceutical companies so far to bring innovative drugs to the market. Many challenges will have to be faced in the next decade to bring more efficient and affordable antibody-based drugs to the clinic. Here, we discuss strategies to select the best therapeutic antigen targets, to optimize the structure of IgG antibodies and to design related or new structures with additional functions.

Molecular bases of cyclodextrin adapter interactions with engineered protein nanopores

Engineered protein pores have several potential applications in biotechnology: as sensor elements in stochastic detection and ultrarapid DNA sequencing, as nanoreactors to observe single-molecule chemistry, and in the construction of nano- and micro-devices. One important class of pores contains molecular adapters, which provide internal binding sites for small molecules. Mutants of the alpha-hemolysin (alphaHL) pore that bind the adapter beta-cyclodextrin (betaCD) approximately 10(4) times more tightly than the wild type have been obtained. We now use single-channel electrical recording, protein engineering including unnatural amino acid mutagenesis, and high-resolution x-ray crystallography to provide definitive structural information on these engineered protein nanopores in unparalleled detail.