Hydrogen bubble dynamic template synthesis of porous gold for nonenzymatic electrochemical detection of glucose

Nonenzymatic electrochemical glucose sensor based on novel Pt-Pd nanoflakes

The sluggish kinetic-controlled glucose oxidation reaction on Pt electrodes is well recognized as the most critical issue that blocks the development and commercialization of enzyme-free glucose sensors, and increasing attention is being focused on improving the analytical performances of these nonenzymatic sensors through exploring new Pt-based catalysts. In the present research, we synthesized novel Pt-Pd nanoflakes (Pt-Pd NFs) with three-dimensional architectures on a homemade screen-printed gold film electrode (SPGFE) substrate using a facile electrochemical deposition without any template, and further investigated the properties of the as-fabricated Pt-Pd NFs/SPGFE for enzymeless glucose detection. The results reveal that the proposed Pt-Pd nanostructure can provide preeminent electrocatalytic activity and excellent selectivity for enzyme-free glucose sensing under simulative physiological conditions, mainly attributing to its attractive structure, large active surface and appropriate applied potential. The resulting Pt-Pd NFs/SPGFE offers linear current responses for glucose with the concentration upper limit to 16 mM. The obtained sensitivity is calculated to be as high as 48.0 μA cm(-2) mM(-1) in the presence of 0.15 M chlorides ions, and practical applications for blood sample analysis are also demonstrated. The proposed Pt-Pd structure is considered as a great potential building block for the fabrication of nonenzymatic electrochemical glucose sensors.

Transparent electrodes fabricated via the self-assembly of silver nanowires using a bubble template

To shore up the demand of transparent electrodes for wide applications such as organic light emitting diodes and solar cells, transparent electrodes are required as an alternative for indium tin oxide electrodes. Herein the self-assembly method with a bubble template paves the way for cost-effective fabrication of transparent electrodes with high conductivity and transparency using self-assembly of silver nanowires (AgNWs) in a bubble template. AgNWs were first dispersed in water that was bubbled with a surfactant and a thickening agent. Furthermore, these AgNWs were assembled by lining along the bubble ridges. When the bubbles containing the AgNWs were sandwiched between two glass substrates, the bubble ridges including the AgNWs formed continuous polygonal structures. Mesh structures were formed on both glass substrates after air-drying. The mesh structures evolved into mesh transparent electrodes following heat-treatment. The AgNW mesh structure exhibited a low sheet resistance of 6.2 Ω/square with a transparency of 84% after heat treatment at 200 °C for 20 min. The performance is higher than that of transparent electrodes with random networks of AgNWs. Furthermore, the conductivity and transparency of the mesh transparent electrodes can be adjusted by changing the amount of the AgNW suspension and the space between the two glass substrates.

A critical review of glucose biosensors based on carbon nanomaterials: carbon nanotubes and graphene

There has been an explosion of research into the physical and chemical properties of carbon-based nanomaterials, since the discovery of carbon nanotubes (CNTs) by Iijima in 1991. Carbon nanomaterials offer unique advantages in several areas, like high surface-volume ratio, high electrical conductivity, chemical stability and strong mechanical strength, and are thus frequently being incorporated into sensing elements. Carbon nanomaterial-based sensors generally have higher sensitivities and a lower detection limit than conventional ones. In this review, a brief history of glucose biosensors is firstly presented. The carbon nanotube and grapheme-based biosensors, are introduced in Sections 3 and 4, respectively, which cover synthesis methods, up-to-date sensing approaches and nonenzymatic hybrid sensors. Finally, we briefly outline the current status and future direction for carbon nanomaterials to be used in the sensing area.

PdM (M = Pt, Au) bimetallic alloy nanowires with enhanced electrocatalytic activity for electro-oxidation of small molecules

A facile and general method has been developed to synthesize well-defined PdPt and PdAu alloy nanowires, which exhibit significantly enhanced activity towards small molecules, such as ethanol, methanol, and glucose electro-oxidation in an alkaline medium. Considering the important role of one-dimensional alloy nanowires in electrocatalytic systems, the present Pd-based alloy nanostructures could offer a promising new class of advanced electrocatalysts for direct alcohol fuel cells and electrochemical sensors.

Nanoporous Pt@Au(x)Cu(100-x) by hydrogen evolution assisted electrodeposition of Au(x)Cu(100-x) and galvanic replacement of Cu with Pt: electrocatalytic properties

Electrodeposition of high-surface-area nanoporous Au-Cu foams under conditions of hydrogen codeposition is studied. The honeycomb-like Au(x)Cu(100-x) foams with 0 ≤ x ≤ 100 are electrodeposited by controlling the amount of corresponding ions in the solution. The amount of metal ions in deposited films follows that in used electrolytes. Compared to monometallic foams, the Au(x)Cu(100-x) structures are characterized by smaller ligament or particle sizes (less than 10 nm) and improved stability. The addition of even a small amount of Cu to the Au matrix is found to dramatically improve the stability of the structure in air environment or an acidic medium. Pt@Au(x)Cu(100-x) structures are formed by the galvanic displacement of Cu from Au(x)Cu(100-x) templates. During the displacement of Cu by Pt, Au serves as a buffer, decreasing mechanical stresses and preventing the detachment of the foam from the substrate. The surface ratio of Pt to Au atoms is controlled by adjusting the amount of Cu in the template. Pt@Au(x)Cu(100-x) electrodes are investigated as novel electrocatalysts for methanol oxidation in alkaline media. The Au-enriched surfaces show higher catalytic activity toward methanol oxidation, while the electrodes with a higher amount of Pt are more stable.

An Improved Sensitivity Non-Enzymatic Glucose Sensor Based on a Nano-Gold Modified Ag Electrode

A non-enzymatic glucose sensor based on nano-gold modified Ag electrode was fabricated by two steps. Gold colloid were firstly prepared according to the literature[11] and then a carefully cleaned Ag electrode was dipped into the gold colloid to obtain the non-enzymatic glucose sensor. The structures and morphologies of nano-gold colloid and nano-Au modified electrode were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV-Vis absorption spectra. The direct electrocatalytic oxidation of glucose in alkaline medium at this modified electrode has been investigated in detail. The result showed that the nano-gold modified electrode had good current response to glucose. The oxidation current was linearly related to the concentration of glucose range frome 0.2 to 175.2μmol/L with a detection limit of 29.5 nmol/L. The nano-gold modified electrode allows highly sensitive, low working potential, fast amperometric sensing of glucose, thus is promising for the future development of non-enzymatic glucose sensors.

Strategies for the fabrication of porous platinum electrodes

Porous platinum is of high technological importance due to its various applications in fuel cells, sensors, stimulation electrodes, mechanical actuators and catalysis in general. Based on a discussion of the general principles behind the reduction of platinum salts and corresponding deposition processes this article discusses techniques available for platinum electrode fabrication. The numerous, different strategies available to fabricate platinum electrodes are reviewed and discussed in the context of their tuning parameters, strengths and weaknesses. These strategies comprise bottom-up approaches as well as top-down approaches. In bottom-up approaches nanoparticles are synthesized in a fi rst step by chemical, photochemical or sonochemical means followed by an electrode formation step by e.g. thin fi lm technology or network formation to create a contiguous and conducting solid electrode structure. In top-down approaches fabrication starts with an already conductive electrode substrate. Corresponding strategies enable the fabrication of substrate-based electrodes by e.g. electrodeposition or the fabrication of self-supporting electrodes by dealloying. As a further top-down strategy, this review describes methods to decorate porous metals other than platinum with a surface layer of platinum. This way, fabrication methods not performable with platinum can be applied to the fabrication of platinum electrodes with the special benefit of low platinum consumption.

A novel non-enzymatic glucose sensor based on Cu nanoparticle modified graphene sheets electrode

A novel, stable and sensitive non-enzymatic glucose sensor was developed by potentiostatically electrodepositing metallic Cu nanoparticles on graphene sheets. The electrochemical performance of the Cu-graphene sheets electrode for detection of glucose was investigated by cyclic voltammetry and chronamperometry. The Cu-graphene sheets electrode displayed a synergistic effect of copper nanoparticles and graphene sheets towards the oxidation of glucose in alkaline solution, showing higher oxidation current and negative shift in peak potential. At detection potential of 500 mV, the Cu-graphene electrode sensor presented a wide linear range up to 4.5mM glucose with a detection limit of 0.5 μM (signal/noise=3). In addition, the sensor responds very quickly (<2s) with addition of glucose. Furthermore, the Cu-graphene sheets electrode exhibits high stability and selectivity to glucose, and the poisoning by chloride ion as well as interference from the oxidation of common interfering species (ascorbic, dopamine, uric acid and carbohydrate) are effectively avoided. The Cu-graphene sheets electrode allows highly selective and sensitive, stable and fast amperometric sensing of glucose, which is promising for the development of non-enzymatic glucose sensor.

Magnetic-field-assisted assembly of layered double hydroxide/metal porphyrin ultrathin films and their application for glucose sensors

The ordered ultrathin films (UTFs) based on CoFe-LDH (layered double hydroxide) nanoplatelets and manganese porphyrin (Mn-TPPS) have been fabricated on ITO substrates via a magnetic-field-assisted (MFA) layer-by-layer (LBL) method and were demonstrated as an electrochemical sensor for glucose. The XRD pattern for the film indicates a long-range stacking order in the normal direction of the substrate. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) images of the MFA LDH/Mn-TPPS UTFs reveal a continuous and uniform surface morphology. Cyclic voltammetry, impedance spectroscopy, and chronoamperometry were used to evaluate the electrochemical performance of the film, and the results show that the MFA-0.5 (0.5 T magnetic field) CoFe-LDH/Mn-TPPS-modified electrode displays the strongest redox current peaks and fastest electron transfer process compared with those of MFA-0 (without magnetic-field) and MFA-0.15 (0.15 T magnetic field). Furthermore, the MFA-0.5 CoFe-LDH/Mn-TPPS exhibits remarkable electrocatalytic activity toward the oxidation of glucose with a linear response range (0.1-15 mM; R(2) = 0.999), low detection limit (0.79 μM) and high sensitivity (66.3 μA mM(-1) cm(-2)). In addition, the glucose sensor prepared by the MFA LBL method also shows good selectivity and reproducibility as well as resistance to poisoning in a chloride ion solution. Therefore, the novel strategy in this work creates new opportunities for the fabrication of nonenzyme sensors with prospective applications in practical detection.

Transforming the fabrication and biofunctionalization of gold nanoelectrode arrays into versatile electrochemical glucose biosensors

High-density arrays of conducting nanoelectrodes (i.e., nanoelectrode arrays [NEAs]) have been developed on the surface of a single electrode for numerous electrochemical sensing paradigms. However, a scalable fabrication technique and robust biofunctionalization protocol are oftentimes lacking and thus many NEA designs have limited efficacy and overall commercial viability in biosensing applications. In this report, we develop a lithography-free nanofabrication protocol to create large arrays of Au nanoelectrodes on a silicon wafer via a porous anodic alumina template. To demonstrate their effectiveness as electrochemical glucose biosensors, alkanethiol self-assembled monolayers (SAMs) are used to covalently attach the enzyme glucose oxidase to the Au NEA surface for subsequent glucose sensing. The sensitivity and linear sensing range of the biosensor is controlled by introducing higher concentrations of long-chain SAMs (11-mercaptoundecanoic acid: MUA) with short-chain SAMs (3-mercaptopropionic acid: MPA) into the enzyme immobilization scheme. This facile NEA fabrication protocol (that is well-suited for integration into electronic devices) and biosensor performance controllability (via the mixed-length enzyme-conjugated SAMs) transforms the Au NEAs into versatile glucose biosensors. Thus these Au NEAs could potentially be used in important real-word applications such as in health-care and bioenergy where biosensors with very distinct sensing capabilities are needed.

Glucose concentration determination based on silica sol-gel encapsulated glucose oxidase optical biosensor arrays

Optical biosensor arrays for rapidly determining the glucose concentrations in a large number of beverage and blood samples were developed by immobilizing glucose oxidase (GOD) on oxygen sensor layer. Glucose oxidase was first encapsulated in silica based gels through sol-gel approach and then immobilized on 96-well microarrays integrated with oxygen sensing film at the bottom. The oxygen sensing film was made of an organically modified silica film (ORMOSIL) doped with tris(4,7-diphenyl-1,10-phenanthroline) ruthenium dichloride (Ru(dpp)(3)Cl(2)). The oxidation reaction of glucose by glucose oxidase could be monitored through fluorescence intensity enhancement due to the oxygen consumption in the reaction. The luminescence changing rate evaluated by the dynamic transient method (DTM) was correlated with the glucose concentration with the wide linear range from 0.1 to 5.0mM (Y=13.28X-0.128, R=0.9968) and low detection limit (0.06 mM). The effects of pH and coexisting ions were systemically studied. The results showed that the optical biosensor arrays worked under a wide range of pH value, and normal interfering species such as Na(+), K(+), Cl(-), PO(4)(3-), and ascorbic acid did not cause apparent interference on the measurement. The activity of glucose oxidase was mostly retained even after 2-month storage, indicating their long-term stability.

Seed-mediated synthesis of Au nanocages and their electrocatalytic activity towards glucose oxidation

We report a modified seed-mediated approach for the synthesis of uniform Au nanocages (AuNCs). HAuCl(4) was reduced in an aqueous mixture of hexamethylenetetramine (HMT), poly(N-vinyl-2-pyrrolidone) (PVP), and AgNO(3). The nanocages were (54.6+/-13.3) nm in outer-edge length and about 12 nm in wall thickness. The structure of the AuNCs was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). Morphological changes associated with the seed-mediated growth of Au nanoparticles (AuNPs) in the absence of HMT or PVP were examined. The results demonstrate that both PVP and HMT play important roles in the formation of the nanocage structure. The function of AgNO(3) was also studied. A possible formation mechanism for the AuNCs was investigated by monitoring TEM images of the Au nanostructures formed at various reaction times. The electrocatalytic activity of the AuNCs towards the oxidation of glucose was explored, and a nonenzymatic glucose sensor with high sensitivity and good stability was further fabricated. To the best of our knowledge, this is the first report of the preparation of AuNCs by a seed-mediated strategy and of the application of AuNCs in the electrocatalytic oxidation of glucose. Our results should facilitate the creation of novel nanomaterials with various morphologies and the exploration of their applications in nanotechnological, optical, catalytic, and materials science fields.

(110)-exposed gold nanocoral electrode as low onset potential selective glucose sensor

A straightforward electrochemical deposition process was developed to grow gold nanostructures, including nanocoral, nanothorn, branched belt, and nanoparticle, on carbon electrodes by reducing HAuCl4 under constant potentials in mixtures containing CTAC and/or NaNO3. Among the nanostructures, the quasi-one-dimensional nanocoral electrode showed the highest surface area. Because of this, it provided excellent electrochemical performances in cyclic voltammetric (CV) studies for kinetic-controlled enzyme-free glucose oxidation reactions. In amperometric studies carried out at 0.200 V in PBS (pH 7.40, 0.100 M), the nanocoral electrode showed the highest anodic current response. It also offered the greatest sensitivity, 22.6 μAmM(-1)cm(-2), an extended linear range, 5.00×10(-2) mM to 3.00×10(1) mM, and a low detection limit, 1.00×10(1) μm among the electrodes investigated in this study. In addition, the glucose oxidation by the nanocoral electrode started at -0.280 V, more negative than the one of using a commercial Au electrode as the working electrode. This is attributed to the presence of exposed Au (110) surfaces on the electrode. The feature was applied to oxidize glucose selectively in the presence of ascorbic acid (AA) and uric acid (UA), common interferences found in physiological analytes. With an applied voltage at -0.100 V, the AA oxidation (started at -0.080 V) can be avoided while the glucose oxidation still provides a significant response.