Extracellular matrix as an inductive scaffold for functional tissue reconstruction

Cartilaginous extracellular matrix derived from decellularized chondrocyte sheets for the reconstruction of osteochondral defects in rabbits

Cartilaginous extracellular matrix (ECM) materials derived from decellularized native articular cartilage are widely used in cartilage regeneration. However, it is difficult for endogenous cells to migrate into ECM derived from native cartilage owing to its nonporous structure and dense nature. Moreover, current decellularization approaches frequently lead to architectural breakdown and potential loss of surface composition of ECM. To solve this problem, we aimed to establish a novel biological ECM scaffold from chondrocyte sheets for cartilage regeneration. We cultured chondrocytes harvested from the auricular cartilage of 4-week-old New Zealand rabbits and enabled them to form cell sheets. These sheets were decellularized using sodium dodecyl sulfate (SDS) with three different concentrations, namely, 1%, 5%, and 10%, followed by 1% Triton X-100 and deoxyribonuclease enzyme solution. In vitro microstructural examination and mechanical tests demonstrated that 1% SDS not only removed chondrocytes completely but also maintained the native architecture and composition of ECM, thus avoiding the use of high-concentration SDS. Application of decellularized chondrocyte sheets for osteochondral defects in rabbits resulted in substantial host remodeling and variant regeneration of osteochondral tissues. One percent SDS-treated decellularized chondrocyte sheets contributed to the superior reconstruction of osteochondral defects as compared with 5% and 10% SDS groups, which includes vascularized subchondral bone, articular cartilage with adequate thickness, and integration with host tissues. Furthermore, ECM from 1% SDS significantly increased the migrating potential of bone marrow mesenchymal stem cells (BMSCs) in vitro. RT-PCR and western blot also revealed that ECM increased the expression of SOX-9 in BMSCs, whereas it decreased COL-X expression. In conclusion, our results suggested that the chondrocyte sheets decellularized with 1% SDS preserved the integrity and bioactivity, which favored cell recruitment and enabled osteochondral regeneration in the knee joints of rabbits, thus offering a promising approach for articular cartilage reconstruction without cell transplantation. STATEMENT OF SIGNIFICANCE: Although biological extracellular matrix (ECM) derived from decellularized native cartilage has been widely used in cartilage regeneration, it is difficult for endogenous cells to migrate into ECM owing to its dense nature. Moreover, current decellularization approaches lead to architectural breakdown of ECM. This study established a novel biological ECM from decellularized chondrocyte sheets for cartilage regeneration. Our results suggested that cartilaginous ECM favored cell recruitment and enabled osteochondral regeneration in rabbits, thus offering a promising approach for articular cartilage reconstruction without cell transplantation. SDS 1% adequately decellularized the chondrocytes in cell sheets, whereas it maintained the native architecture and composition of ECM, thereby avoiding the use of high-concentration SDS and providing a new way to acquire cartilaginous ECM.

Biodegradation of ECM hydrogel promotes endogenous brain tissue restoration in a rat model of stroke

The brain is considered to have a limited capacity to repair damaged tissue and no regenerative capacity following injury. Tissue lost after a stroke is therefore not spontaneously replaced. Extracellular matrix (ECM)-based hydrogels implanted into the stroke cavity can attract endogenous cells. These hydrogels can be formulated at different protein concentrations that govern their rheological and inductive properties. We evaluated histologically 0, 3, 4 and 8 mg/mL of porcine-derived urinary bladder matrix (UBM)-ECM hydrogel concentrations implanted in a 14-day old stroke cavity. Less concentrated hydrogels (3 and 4 mg/mL) were efficiently degraded with a 95% decrease in volume by 90 days, whereas only 32% of the more concentrated and stiffer hydrogel (8 mg/mL) was resorbed. Macrophage infiltration and density within the bioscaffold progressively increased in the less concentrated hydrogels and decreased in the 8 mg/mL hydrogels. The less concentrated hydrogels showed a robust invasion of endothelial cells with neovascularization. No neovascularization occurred with the stiffer hydrogel. Invasion of neural cells increased with time in all hydrogel concentrations. Differentiation of neural progenitors into mature neurons with axonal projections was evident, as well as a robust invasion of oligodendrocytes. However, relatively few astrocytes were present in the ECM hydrogel, although some were present in the newly forming tissue between degrading scaffold patches. Implantation of an ECM hydrogel partially induced neural tissue restoration, but a more complete understanding is required to evaluate its potential therapeutic application. STATEMENT OF SIGNIFICANCE: Extracellular matrix hydrogel promotes tissue regeneration in many peripheral soft tissues. However, the brain has generally been considered to lack the potential for tissue regeneration. We here demonstrate that tissue regeneration in the brain can be achieved using implantation of ECM hydrogel into a tissue cavity. A structure-function relationship is key to promote tissue regeneration in the brain. Specifically, weaker hydrogels that were retained in the cavity underwent an efficient biodegradation within 14 days post-implantation to promote a tissue restoration within the lesion cavity. In contrast, stiffer ECM hydrogel only underwent minor biodegradation and did not lead to a tissue restoration. Inductive hydrogels weaker than brain tissue provide the appropriate condition to promote an endogenous regenerative response that restores tissue in a cavity. This approach offers new avenues for the future treatment of chronic tissue damage caused by stroke and other acute brain injuries.

Utility of extracellular matrix powders in tissue engineering

Extracellular matrix (ECM) materials have had remarkable success as scaffolds in tissue engineering (TE) and as therapies for tissue injury whereby the ECM microenvironment promotes constructive remodeling and tissue regeneration. ECM powder and solubilized derivatives thereof have novel applications in TE and RM afforded by the capacity of these constructs to be dynamically modulated. The powder form allows for effective incorporation and penetration of reagents; hence, ECM powder is an efficacious platform for 3D cell culture and vehicle for small molecule delivery. ECM powder offers minimally invasive therapy for tissue injury and successfully treatment for wounds refractory to first-line therapies. Comminution of ECM and fabrication of powder-derived constructs, however, may compromise the biological integrity of the ECM. The current lack of optimized fabrication protocols prevents a more extensive and effective clinical application of ECM powders. Further study on methods of ECM powder fabrication and modification is needed.

Decellularized human fetal intestine as a bioscaffold for regeneration of the rabbit bladder submucosa

PURPOSE

We aim to report a method to create a natural acellular scaffold from human fetal small intestine for augmentation cystoplasty in rabbits.

METHODS

Fetal intestines were decellularized by immersion in a hypotonic solution. The success of this protocol was evaluated by histological analysis, scanning electron microscopy and measurement of collagen and sulfated glycosaminoglycan of the acellular tissues. Eight mature rabbits were selected and acellular scaffolds were implanted on the exposed urothelium. Urodynamic studies and cystography were performed after six months. At 14, 120 and 180days animals were sacrificed and augmented bladders were resected.

RESULTS

Histological analysis revealed formation of muscular layer and blood vessels in implanted scaffolds similar to normal bladder. These findings demonstrate the effective seeding of scaffold by host bladder cells. The tissue architecture of recellularized scaffold was similar to the native bladder.

CONCLUSIONS

Fetal intestine acellular matrix could be an exceptional scaffold for bladder augmentation cystoplasty and may pave the road for future studies in order to be used for clinical application.

How to build a lung: latest advances and emerging themes in lung bioengineering

Chronic respiratory diseases remain a major cause of morbidity and mortality worldwide. The only option at end-stage disease is lung transplantation, but there are not enough donor lungs to meet clinical demand. Alternative options to increase tissue availability for lung transplantation are urgently required to close the gap on this unmet clinical need. A growing number of tissue engineering approaches are exploring the potential to generate lung tissue ex vivo for transplantation. Both biologically derived and manufactured scaffolds seeded with cells and grown ex vivo have been explored in pre-clinical studies, with the eventual goal of generating functional pulmonary tissue for transplantation. Recently, there have been significant efforts to scale-up cell culture methods to generate adequate cell numbers for human-scale bioengineering approaches. Concomitantly, there have been exciting efforts in designing bioreactors that allow for appropriate cell seeding and development of functional lung tissue over time. This review aims to present the current state-of-the-art progress for each of these areas and to discuss promising new ideas within the field of lung bioengineering.

Multi-length scale bioprinting towards simulating microenvironmental cues

It is envisaged that the creation of cellular environments at multiple length scales, that recapitulate in vivo bioactive and structural roles, may hold the key to creating functional, complex tissues in the laboratory. This review considers recent advances in biofabrication and bioprinting techniques across different length scales. Particular focus is placed on 3D printing of hydrogels and fabrication of biomaterial fibres that could extend the feature resolution and material functionality of soft tissue constructs. The outlook from this review discusses how one might create and simulate microenvironmental cues in vitro. A fabrication platform that integrates the competencies of different biofabrication technologies is proposed. Such a multi-process, multiscale fabrication strategy may ultimately translate engineering capability into an accessible life sciences toolkit, fulfilling its potential to deliver in vitro disease models and engineered tissue implants.

Effect of Source Animal Age upon Macrophage Response to Extracellular Matrix Biomaterials

Extracellular matrix biomaterials have been shown to promote constructive remodeling in many preclinical and clinical applications. This response has been associated with the promotion of a timely switch from pro-inflammatory (M1) to anti-inflammatory (M2) macrophages. A previous study has shown that this beneficial response is lost when these biomaterials are derived from aged animals. This study examined the impact of small intestine submucosa (SIS) derived from 12, 26 and 52 week old pigs on the phenotype and function of bone marrow macrophages derived either from 2 or 18 month old mice. Results showed that 52 week old SIS promoted less iNOS in 2 month macrophages and Fizz1 expression in 2 and 18 month compared to 12 week SIS. Pro-inflammatory cytokine exposure to 52 week SIS-treated macrophages resulted in higher iNOS in 18 month macrophages and reduced MHC-II expression in 2 month macrophages, as well as reduced nitric oxide production in comparison to 12 week SIS. These results indicate that ECM derived from aged animals promotes an altered macrophage phenotype compared to young controls. This suggests that sourcing of ECM from young donors is important to preserve constructive remodeling outcomes of ECM biomaterials. Alteration of macrophage phenotype by aged ECM also raises the hypothesis that alterations in aged ECM may play a role in immune dysfunction in aged individuals.

3D bioprinting and decellularized ECM-based biomaterials for in vitro CV tissue engineering

Advanced extrusion-based 3D printing strategies allow the rapid fabrication of complex anatomically relevant architectures. Moreover, they have the potential to fabricate 3D-bioprinted cardiac constructs by depositing cardiac cells with appropriate biomaterials. Heart-derived decellularized extracellular matrices containing a complex mixture of various extracellular molecules provide a comprehensive microenvironmental niche similar to native cardiac tissue. Nonetheless, a major concern persists pertaining to insufficient vascularization and mimicking of the complex 3D architectural features, which can be tackled using 3D printing approaches. In this review, we discuss the advantage and application of decellularized extracellular matrix-based hydrogels for the 3D printing of engineered cardiac tissues. We also briefly talk about the integration of electroactive materials within cardiac patches to improve the myocardium's electrophysiological properties.

Extracellular matrix scaffolds for treatment of large volume muscle injuries: A review

OBJECTIVE

Large muscular or musculotendinous defects present a dilemma because of the inadequacies of current treatment strategies. Extracellular matrices (ECM) are potential clinically applicable regenerative biomaterials. This review summarizes information from the preclinical literature evaluating the use of ECM for muscle regeneration in animal models of volumetric muscle loss (VML).

STUDY DESIGN

Literature review.

SAMPLE POPULATION

Animal models of VML in which surgical repair was performed with an ECM product, with or without added cell populations.

METHODS

PubMed, Google Scholar, CAB abstracts, and Scopus were searched for preclinical studies using ECM in animal models of VML. The search terms "extracellular matrix," "VML," "muscle regeneration," "cell seeded," and "scaffold" identified 40 articles that met inclusion criteria of an animal model of VML in which surgical repair was performed with an ECM product, with or without added cell populations. Key skeletal muscle repair mechanisms and experimental findings on scaffold type, VML location, and experimental animal species were summarized.

CONCLUSIONS

Satellite cells and basal lamina are key endogenous contributors to skeletal muscle regeneration. ECM as a dynamic tissue component may provide structural integrity, signaling molecules, and a 3-dimensional topography conducive to muscle regeneration. Preclinical models of muscle repair most commonly used mice and rats (88%). Most experimental lesions were created in abdominal wall (33%), anterior tibialis (33%), latissimus dorsi (10%), or quadriceps (10%) muscles. Matrices varied markedly in source and preparation. Experimental outcomes of ECM and cell-seeded ECM implantation for muscle regeneration in VML were highly variable and dependent on matrix tissue source, preparation method, and anatomic site of injury. Scar tissue formation likely contributes to load transfer. Nonappendicular lesions had better regenerative results compared with appendicular VML.

CLINICAL SIGNIFICANCE

The preponderance of current evidence supports the use of ECM for muscle defect repair only in specific instances, such as nonappendicular and/or partial-thickness defects. Consequently, clinical use of ECM in veterinary patients requires careful consideration of the specific ECM product, lesion size and location, and loading circumstances.

Acellular Mouse Kidney ECM can be Used as a Three-Dimensional Substrate to Test the Differentiation Potential of Embryonic Stem Cell Derived Renal Progenitors

The development of strategies for tissue regeneration and bio-artificial organ development is based on our understanding of embryogenesis. Differentiation protocols attempt to recapitulate the signaling modalities of gastrulation and organogenesis, coupled with cell selection regimens to isolate the cells of choice. This strategy is impeded by the lack of optimal in vitro culture systems since traditional culture systems do not allow for the three-dimensional interaction between cells and the extracellular matrix. While artificial three-dimensional scaffolds are available, using the natural extracellular matrix scaffold is advantageous because it has a distinct architecture that is difficult to replicate. The adult extracellular matrix is predicted to mediate signaling related to tissue repair not embryogenesis but existing similarities between the two argues that the extracellular matrix will influence the differentiation of stem and progenitor cells. Previous studies using undifferentiated embryonic stem cells grown directly on acellular kidney ECM demonstrated that the acellular kidney supported cell growth but limited differentiation occurred. Using mouse kidney extracellular matrix and mouse embryonic stem cells we report that the extracellular matrix can support the development of kidney structures if the stem cells are first differentiated to kidney progenitor cells before being applied to the acellular organ.

Sphingosine 1-Phosphate Receptor 1 Is Required for MMP-2 Function in Bone Marrow Mesenchymal Stromal Cells: Implications for Cytoskeleton Assembly and Proliferation

Bone marrow-derived mesenchymal stromal cell- (BM-MSC-) based therapy is a promising option for regenerative medicine. An important role in the control of the processes influencing the BM-MSC therapeutic efficacy, namely, extracellular matrix remodelling and proliferation and secretion ability, is played by matrix metalloproteinase- (MMP-) 2. Therefore, the identification of paracrine/autocrine regulators of MMP-2 function may be of great relevance for improving BM-MSC therapeutic potential. We recently reported that BM-MSCs release the bioactive lipid sphingosine 1-phosphate (S1P) and, here, we demonstrated an impairment of MMP-2 expression/release when the S1P receptor subtype S1PR1 is blocked. Notably, active S1PR1/MMP-2 signalling is required for F-actin structure assembly (lamellipodia, microspikes, and stress fibers) and, in turn, cell proliferation. Moreover, in experimental conditions resembling the damaged/regenerating tissue microenvironment (hypoxia), S1P/S1PR1 system is also required for HIF-1α expression and vinculin reduction. Our findings demonstrate for the first time the trophic role of S1P/S1PR1 signalling in maintaining BM-MSCs' ability to modulate MMP-2 function, necessary for cytoskeleton reorganization and cell proliferation in both normoxia and hypoxia. Altogether, these data provide new perspectives for considering S1P/S1PR1 signalling a pharmacological target to preserve BM-MSC properties and to potentiate their beneficial potential in tissue repair.

Blood-brain barrier-supported neurogenesis in healthy and diseased brain

Adult neurogenesis is one of the most important mechanisms contributing to brain development, learning, and memory. Alterations in neurogenesis underlie a wide spectrum of brain diseases. Neurogenesis takes place in highly specialized neurogenic niches. The concept of neurogenic niches is becoming widely accepted due to growing evidence of the important role of the microenvironment established in the close vicinity to stem cells in order to provide adequate control of cell proliferation, differentiation, and apoptosis. Neurogenic niches represent the platform for tight integration of neurogenesis and angiogenesis supported by specific properties of cerebral microvessel endothelial cells contributing to establishment of partially compromised blood-brain barrier (BBB) for the adjustment of local conditions to the current metabolic needs of stem and progenitor cells. Here, we review up-to-date data on microvascular dynamics in activity-dependent neurogenesis, specific properties of BBB in neurogenic niches, endothelial-driven mechanisms of clonogenic activity, and future perspectives for reconstructing the neurogenic niches in vitro.

Extracellular matrix hydrogel therapies: In vivo applications and development

Decellularized extracellular matrix (ECM) has been widely used for tissue engineering applications and is becoming increasingly versatile as it can take many forms, including patches, powders, and hydrogels. Following additional processing, decellularized ECM can form an inducible hydrogel that can be injected, providing for new minimally-invasive procedure opportunities. ECM hydrogels have been derived from numerous tissue sources and applied to treat many disease models, such as ischemic injuries and organ regeneration or replacement. This review will focus on in vivo applications of ECM hydrogels and functional outcomes in disease models, as well as discuss considerations for clinical translation.

STATEMENT OF SIGNIFICANCE

Extracellular matrix (ECM) hydrogel therapies are being developed to treat diseased or damaged tissues and organs throughout the body. Many ECM hydrogels are progressing from in vitro models to in vivo biocompatibility studies and functional models. There is significant potential for clinical translation of these therapies since one ECM hydrogel therapy is already in a Phase 1 clinical trial.

Guided osteoporotic bone regeneration with composite scaffolds of mineralized ECM/heparin membrane loaded with BMP2-related peptide

Introduction

At present, the treatment of osteoporotic defects poses a great challenge to clinicians, owing to the lower regeneration capacity of the osteoporotic bone as compared with the normal bone. The guided bone regeneration (GBR) technology provides a promising strategy to cure osteoporotic defects using bioactive membranes. The decellularized matrix from the small intestinal submucosa (SIS) has gained popularity for its natural microenvironment, which induces cell response.

Materials and methods

In this study, we developed heparinized mineralized SIS loaded with bone morphogenetic protein 2 (BMP2)-related peptide P28 (mSIS/P28) as a novel GBR membrane for guided osteoporotic bone regeneration. These mSIS/P28 membranes were obtained through the mineralization of SIS (mSIS), followed by P28 loading onto heparinized mSIS. The heparinized mSIS membrane was designed to improve the immobilization efficacy and facilitate controlled release of P28. P28 release from mSIS-heparin-P28 and its effects on the proliferation, viability, and osteogenic differentiation of bone marrow stromal stem cells from ovariectomized rats (rBMSCs-OVX) were investigated in vitro. Furthermore, a critical-sized OVX calvarial defect model was used to assess the bone regeneration capability of mSIS-heparin-P28 in vivo.

Results

In vitro results showed that P28 release from mSIS-heparin-P28 occurred in a controlled manner, with a long-term release time of 40 days. Moreover, mSIS-heparin-P28 promoted cell proliferation and viability, alkaline phosphatase activity, and mRNA expression of osteogenesis-related genes in rBMSCs-OVX without the addition of extra osteogenic components. In vivo experiments revealed that mSIS-heparin-P28 dramatically stimulated osteoporotic bone regeneration.

Conclusion

The heparinized mSIS loaded with P28 may serve as a potential GBR membrane for repairing osteoporotic defects.

Nerve-specific, xenogeneic extracellular matrix hydrogel promotes recovery following peripheral nerve injury

Peripheral nerve possesses the inherent ability to regrow and recover following injury. However, nerve regeneration is often slow and incomplete due to limitations associated with the local microenvironment during the repair process. Manipulation of the local microenvironment at the site of nerve repair, therefore, represents a significant opportunity for improvement in downstream outcomes. Macrophages and Schwann cells play a key role in the orchestration of early events after peripheral nerve injury. We describe the production, characterization, and use of an injectable, peripheral nerve-specific extracellular matrix-based hydrogel (PNSECM) for promoting modulation of the local macrophage and Schwann cell responses at the site of nerve repair in a rodent model of sciatic nerve injury. We show that PNSECM hydrogels largely maintain the matrix structure associated with normal native peripheral nerve tissue. PNSECM hydrogels were also found to promote increased macrophage invasion, higher percentages of M2 macrophages and enhanced Schwann cell migration when used as a lumen filler in a rodent model of nerve gap repair using an inert nerve guidance conduit. These results suggest that an injectable PNSECM hydrogel can provide a supportive, bioactive scaffold which promotes repair of peripheral nerve in vivo. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 450-459, 2018.

Current Status of Tissue Engineering in the Management of Severe Hypospadias

Hypospadias, characterized by misplacement of the urinary meatus in the lower side of the penis, is a frequent birth defect in male children. Because of the huge variation in the anatomic presentation of hypospadias, no single urethroplasty procedure is suitable for all situations. Hence, many surgical techniques have emerged to address the shortage of tissues required to bridge the gap in the urethra particularly in the severe forms of hypospadias. However, the rate of postoperative complications of currently available surgical procedures reaches up to one-fourth of the patients having severe hypospadias. Moreover, these urethroplasty techniques are technically demanding and require considerable surgical experience. These limitations have fueled the development of novel tissue engineering techniques that aim to simplify the surgical procedures and to reduce the rate of complications. Several types of biomaterials have been considered for urethral repair, including synthetic and natural polymers, which in some cases have been seeded with cells prior to implantation. These methods have been tested in preclinical and clinical studies, with variable degrees of success. This review describes the different urethral tissue engineering methodologies, with focus on the approaches used for the treatment of hypospadias. At present, despite many significant advances, the search for a suitable tissue engineering approach for use in routine clinical applications continues.

Development of a Cytocompatible Scaffold from Pig Immature Testicular Tissue Allowing Human Sertoli Cell Attachment, Proliferation and Functionality

Cryopreservation of immature testicular tissue before chemo/radiotherapy is the only option to preserve fertility of cancer-affected prepubertal boys. To avoid reintroduction of malignant cells, development of a transplantable scaffold by decellularization of pig immature testicular tissue (ITT) able to support decontaminated testicular cells could be an option for fertility restoration in these patients. We, therefore, compared decellularization protocols to produce a cytocompatible scaffold. Fragments of ITT from 15 piglets were decellularized using three protocols: sodium dodecyl sulfate (SDS)-Triton (ST), Triton-SDS-Triton (TST) and trypsin 0.05%/ethylenediaminetetraacetic acid (EDTA) 0.02%-Triton (TET) with varying detergent concentrations. All protocols were able to lower DNA levels. Collagen retention was demonstrated in all groups except ST 1%, and a significant decrease in glycosaminoglycans was observed in the TST 1% and TET 1% groups. When Sertoli cells (SCs) were cultured with decellularized tissue, no signs of cytotoxicity were detected. A higher SC proliferation rate and greater stem cell factor secretion were observed than with SCs cultured without scaffold. ST 0.01% and TET 3% conditions offered the best compromise in terms of DNA elimination and extracellular matrix (ECM) preservation, while ensuring good attachment, proliferation and functionality of human SCs. This study demonstrates the potential of using decellularized pig ITT for human testicular tissue engineering purposes.

Preparation of Scaffolds from Decellularized Testicular Matrix

Biological scaffolds composed of extracellular matrix (ECM) are typically derived by processes that involve decellularization of tissues or organs. Here we describe a simple and robust methodology for the preparation of decellularized testicular matrix (DTM) scaffolds with minimal damage to the native three-dimensional structure and tissue-specific ECM components. Such DTM scaffolds can help to gain a better insight into the molecular composition and function of testicular ECM and to develop new tissue engineering approaches to treat various types of male fertility disorders.

Development and Assessment of a 3D-Printed Scaffold with rhBMP-2 for an Implant Surgical Guide Stent and Bone Graft Material: A Pilot Animal Study

In this study, a new concept of a 3D-printed scaffold was introduced for the accurate placement of an implant and the application of a recombinant human bone morphogenetic protein-2 (rhBMP-2)-loaded bone graft. This preliminary study was conducted using two adult beagles to evaluate the 3D-printed polycaprolactone (PCL)/β-tricalcium phosphate (β-TCP)/bone decellularized extracellular matrix (bdECM) scaffold conjugated with rhBMP-2 for the simultaneous use as an implant surgical guide stent and bone graft material that promotes new bone growth. Teeth were extracted from the mandible of the beagle model and scanned by computed tomography (CT) to fabricate a customized scaffold that would fit the bone defect. After positioning the implant guide scaffold, the implant was placed and rhBMP-2 was injected into the scaffold of the experimental group. The two beagles were sacrificed after three months. The specimen block was obtained and scanned by micro-CT. Histological analysis showed that the control and experimental groups had similar new bone volume (NBV, %) but the experimental group with BMP exhibited a significantly higher bone-to-implant contact ratio (BIC, %). Within the limitations of this preliminary study, a 3D-printed scaffold conjugated with rhBMP-2 can be used simultaneously as an implant surgical guide and a bone graft in a large bone defect site. Further large-scale studies will be needed to confirm these results.

Laser surface modification of decellularized extracellular cartilage matrix for cartilage tissue engineering

The implantation of autologous cartilage as the gold standard operative procedure for the reconstruction of cartilage defects in the head and neck region unfortunately implicates a variety of negative effects at the donor site. Tissue-engineered cartilage appears to be a promising alternative. However, due to the complex requirements, the optimal material is yet to be determined. As demonstrated previously, decellularized porcine cartilage (DECM) might be a good option to engineer vital cartilage. As the dense structure of DECM limits cellular infiltration, we investigated surface modifications of the scaffolds by carbon dioxide (CO₂) and Er:YAG laser application to facilitate the migration of chondrocytes inside the scaffold. After laser treatment, the scaffolds were seeded with human nasal septal chondrocytes and analyzed with respect to cell migration and formation of new extracellular matrix proteins. Histology, immunohistochemistry, SEM, and TEM examination revealed an increase of the scaffolds' surface area with proliferation of cell numbers on the scaffolds for both laser types. The lack of cytotoxic effects was demonstrated by standard cytotoxicity testing. However, a thermal denaturation area seemed to hinder the migration of the chondrocytes inside the scaffolds, even more so after CO₂ laser treatment. Therefore, the Er:YAG laser seemed to be better suitable. Further modifications of the laser adjustments or the use of alternative laser systems might be advantageous for surface enlargement and to facilitate migration of chondrocytes into the scaffold in one step.

Decellularized Matrices As Cell-Instructive Scaffolds to Guide Tissue-Specific Regeneration

Decellularized scaffolds are promising clinically translational biomaterials that can be applied to direct cell responses and promote tissue regeneration. Bioscaffolds derived from the extracellular matrix (ECM) of decellularized tissues can naturally mimic the complex extracellular microenvironment through the retention of compositional, biomechanical, and structural properties specific to the native ECM. Increasingly, studies have investigated the use of ECM-derived scaffolds as instructive substrates to recapitulate properties of the stem cell niche and guide cell proliferation, paracrine factor production, and differentiation in a tissue-specific manner. Here, we review the application of decellularized tissue scaffolds as instructive matrices for stem or progenitor cells, with a focus on the mechanisms through which ECM-derived scaffolds can mediate cell behavior to promote tissue-specific regeneration. We conclude that although additional preclinical studies are required, ECM-derived scaffolds are a promising platform to guide cell behavior and may have widespread clinical applications in the field of regenerative medicine.

Characterization of a new decellularized bovine pericardial biological mesh: Structural and mechanical properties

Implants made from naturally-derived biomaterials, also called biological meshes or biomeshes, typically derive from decellularized extracellular matrix of either animal or human tissue. Biomeshes have many biomedical applications such as ligament repair, bone and cartilage regeneration and soft tissue replacement. Bovine collagen is one of the most widely used and abundantly available xenogenic materials. In particular, bovine pericardium is widely used as extracellular matrix bioprosthetic tissue. The efficiency of a pericardial mesh to function as scaffold depends on the quality of the decellularization protocol used. Moreover, the biomesh mechanical features are critical for a successful surgical repair process, as they must reproduce the biological properties of the autologous tissue. Different methods of physical, chemical, or enzymatic decellularization exist, but no one has proved to be ideal. Therefore, in the present study, we developed a novel decellularization protocol for a bovine pericardium-derived biomesh. We characterized the biomesh obtained by comparing some ultrastructural, physical and mechanical features to a reference commercial biomesh. Quantification revealed that our novel decellularization process removed about 90% of the native pericardial DNA. Microscopic and ultrastructural analysis documented the maintenance of the physiological structure of the pericardial collagen. Moreover, mechanical tests showed that both the extension and resilience of the new biomesh were statistically higher than the commercial control ones. The results presented in this study demonstrate that our protocol is promising in preparing high quality bovine pericardial biomeshes, encouraging further studies to validate its use in tissue engineering and regenerative medicine protocols.

Vascularisation for cardiac tissue engineering: the extracellular matrix

Cardiovascular diseases present a major socio-economic burden. One major problem underlying most cardiovascular and congenital heart diseases is the irreversible loss of contractile heart muscle cells, the cardiomyocytes. To reverse damage incurred by myocardial infarction or by surgical correction of cardiac malformations, the loss of cardiac tissue with a thickness of a few millimetres needs to be compensated. A promising approach to this issue is cardiac tissue engineering. In this review we focus on the problem of in vitro vascularisation as implantation of cardiac patches consisting of more than three layers of cardiomyocytes (> 100 μm thick) already results in necrosis. We explain the need for vascularisation and elaborate on the importance to include non-myocytes in order to generate functional vascularised cardiac tissue. We discuss the potential of extracellular matrix molecules in promoting vascularisation and introduce nephronectin as an example of a new promising candidate. Finally, we discuss current biomaterial- based approaches including micropatterning, electrospinning, 3D micro-manufacturing technology and porogens. Collectively, the current literature supports the notion that cardiac tissue engineering is a realistic option for future treatment of paediatric and adult patients with cardiac disease.

Decellularization of placentas: establishing a protocol

Biological biomaterials for tissue engineering purposes can be produced through tissue and/or organ decellularization. The remaining extracellular matrix (ECM) must be acellular and preserve its proteins and physical features. Placentas are organs of great interest because they are discarded after birth and present large amounts of ECM. Protocols for decellularization are tissue-specific and have not been established for canine placentas yet. This study aimed at analyzing a favorable method for decellularization of maternal and fetal portions of canine placentas. Canine placentas were subjected to ten preliminary tests to analyze the efficacy of parameters such as the type of detergents, freezing temperatures and perfusion. Two protocols were chosen for further analyses using histology, scanning electron microscopy, immunofluorescence and DNA quantification. Sodium dodecyl sulfate (SDS) was the most effective detergent for cell removal. Freezing placentas before decellularization required longer periods of incubation in different detergents. Both perfusion and immersion methods were capable of removing cells. Placentas decellularized using Protocol I (1% SDS, 5 mM EDTA, 50 mM TRIS, and 0.5% antibiotic) preserved the ECM structure better, but Protocol I was less efficient to remove cells and DNA content from the ECM than Protocol II (1% SDS, 5 mM EDTA, 0.05% trypsin, and 0.5% antibiotic).

Biomimetic matrix fabricated by LMP-1 gene-transduced MC3T3-E1 cells for bone regeneration

Bone healing is regulated by multiple microenvironmental signals provided by the extracellular matrix (ECM). This study aimed to mimic the native osteoinductive microenvironment by developing an ECM using gene-transduced cells. The LIM mineralization protein-1 (LMP-1) gene was transferred to murine pre-osteoblast cells (MC3T3-E1) using lentiviral vectors. Western blotting assay indicated that the MC3T3-E1 cells expressed an increased level of bone morphologic protein-2, -4 and -7 (BMP-2, -4 and -7) after LMP-1 gene transduction. The transduced cells were then seeded into calcined bovine bone scaffolds and cultured for 7, 14, and 21 days to construct ECMs on the scaffolds. The ECM-scaffold composites were then decellularized using the freeze-drying method. Scaffolds without ECM deposition were used as controls. The composites and controls were implanted into critical-sized bone defects created in the distal femurs of New Zealand rabbits. Twelve weeks after the surgery, both microcomputed tomography and histologic results indicated that the 7-day-cell-modified ECM-scaffold composites induced bone regeneration with significantly larger volume, trabecular thickness and connectivity than the controls. However, the 14- and 21-day-cell-modified ECM-scaffold composites triggered sustained inflammation response even at 12 weeks after the surgery and showed less bone ingrowth and integration than their 7-day-cell-modified counterparts. In conclusion, these results highlight the viable gene transfer techniques for manipulating cells in a constructed microenvironment of ECM for bone regeneration. However, the unresolved inflammation relating to the duration of ECM modification needs to be considered.

Long-term retention of ECM hydrogel after implantation into a sub-acute stroke cavity reduces lesion volume

Salvaging or functional replacement of damaged tissue caused by stroke in the brain remains a major therapeutic challenge. In situ gelation and retention of a hydrogel bioscaffold composed of 8mg/mL extracellular matrix (ECM) can induce a robust invasion of cells within 24h and potentially promote a structural remodeling to replace lost tissue. Herein, we demonstrate a long-term retention of ECM hydrogel within the lesion cavity. A decrease of approximately 32% of ECM volume is observed over 12weeks. Lesion volume, as measured by magnetic resonance imaging and histology, was reduced by 28%, but a battery of behavioral tests (bilateral asymmetry test; footfault; rotameter) did not reveal a therapeutic or detrimental effect of the hydrogel. Glial scarring and peri-infarct astrocytosis were equivalent between untreated and treated animals, potentially indicating that permeation into host tissue is required to exert therapeutic effects. These results reveal a marked difference of biodegradation of ECM hydrogel in the stroke-damaged brain compared to peripheral soft tissue repair. Further exploration of these structure-function relationships is required to achieve a structural remodeling of the implanted hydrogel, as seen in peripheral tissues, to replace lost tissue and promote behavioral recovery.

STATEMENT OF SIGNIFICANCE

In situ gelation of ECM is essential for its retention within a tissue cavity. The brain is a unique environment with restricted access that necessitates image-guided delivery through a thin needle to access tissue cavities caused by stroke, as well as other conditions, such as traumatic brain injury or glioma resection. Knowledge about a brain tissue response to implanted hydrogels remains limited, especially in terms of long-term effects and potential impact on behavioral function. We here address the long-term retention of hydrogel within the brain environment, its impact on behavioral function, as well as its ability to reduce further tissue deformation caused by stroke. This study highlights considerable differences in the brain's long-term response to an ECM hydrogel compared to peripheral soft tissue. It underlines the importance of understanding the effect of the structural presence of a hydrogel within a cavity upon host brain tissue and behavioral function. As demonstrated herein, ECM hydrogel can fill a cavity long-term to reduce further progression of the cavity, while potentially serving as a reservoir for local drug or cell delivery.

Self-assembled RGD dehydropeptide hydrogels for drug delivery applications

Peptide-based self-assembled hydrogels have triggered remarkable research interest in recent years owing to their biocompatibility and biomimetic properties and responsiveness, which warrant many technological and biomedical applications. Dehydrodipeptides N-capped with naproxen emerged from our research as effective hydrogelators endowed with resistance to proteolysis. Dehydrodipeptide-based hydrogels are promising nanocarriers for drug delivery applications. In this work, we demonstrate that dehydrodipetide Npx-l-Ala-Z-ΔPhe-OH can be deployed as a minimalist hydrogelator module for synthesizing a gelating construct Npx-l-Ala-Z-ΔPhe-G-R-G-D-G-OH bearing a GRGDG adhesion motif. The self-assembly of the peptide construct and the drug delivery properties of the hydrogel were studied in this work. The peptide construct showed no toxicity towards a fibroblast cell line expressing the α_vβ₃ integrin. Docking studies suggest that the hydrogelator block does not interfere with the recognition of the RGD motif by the integrin receptor. The self-assembly seems to be directed by intermolecular naphthalene π-π stacking interactions, with the peptide backbone assuming a random coil conformation both in solution and in the gel phase. TEM and STEM imaging revealed that the hydrogel is made of entangled bundles of long thin fibres (width circa 23 nm). The hydrogel exhibits viscoelastic properties, thermo-reversibility and recovery after mechanical fluidization. FRET studies showed that curcumin incorporated into the hydrogel interacts non-covalently with the hydrogel fibrils. Delivery of curcumin from the hydrogel into Nile red loaded model membranes (SUVs) was demonstrated by FRET. Naproxen N-capped dehydrodipeptides are efficacious minimalist hydrogelator modules for obtaining hydrogels functionalized with peptide ligands for cell receptors. These hydrogels are potential nanocarriers for drug delivery.

Use of human aortic extracellular matrix as a scaffold for construction of a patient-specific tissue engineered vascular patch

Synthetic or biologic materials are usually used to repair vascular malformation in congenital heart defects; however, non-autologous materials show both mismatch compliance and antigenicity, as well as a lack of recellularization on its surface. Here, we constructed a tissue-engineered vascular patch (TEVP) using decellularized extracellular matrix (ECM) scaffold obtained from excised human aorta during surgery, which was seeded with patient-derived bone marrow CD34-positive (CD34+) progenitor cells. While cellular components were removed, the decellularized ECM scaffold retained native ECM composition, similar mechanical performance to undecellularized aortic tissue, and supported the adhesion, survival and proliferation of CD34+ progenitor cells. Interestingly, after in vitro seeding of decellularized aortic ECM scaffold for 21 d, CD34+ progenitor cells differentiated into mature vascular endothelial cells without addition of any growth factors, as confirmed by the increased levels of endothelial surface markers (CD31, Von Willebrand factor (VWF), VE-cadherin and ICAM-2) and upregulated gene levels (CD31, VWF and eNOS) concurrently with decreased expression of stem cell markers (CD133 and CD34), thus, resulting in surface endothelialization of decellularized ECM scaffold. Consequently, the patient-specific TEVP constructed in this study holds great potential for clinical use in pediatric patients with vascular malformation.

Bioinks for bioprinting functional meniscus and articular cartilage

3D bioprinting can potentially enable the engineering of biological constructs mimicking the complex geometry, composition, architecture and mechanical properties of different tissues and organs. Integral to the successful bioprinting of functional articular cartilage and meniscus is the identification of suitable bioinks and cell sources to support chondrogenesis or fibrochondrogenesis, respectively. Such bioinks must also possess the appropriate rheological properties to be printable and support the generation of complex geometries. This review will outline the parameters required to develop bioinks for such applications and the current recent advances in 3D bioprinting of functional meniscus and articular cartilage. The paper will conclude by discussing key scientific and technical hurdles in this field and by defining future research directions for cartilage and meniscus bioprinting.

Reconstituting Mouse Lungs with Conditionally Reprogrammed Human Bronchial Epithelial Cells

We developed methods for conditionally reprogramming (CR) primary human bronchial epithelial cells (HBECs) to extend their functional lifespan and permit their differentiation into both upper and lower airway lung epithelium. We also developed a bioreactor to support vascular perfusion and rhythmic breathing of decellularized mouse lungs reconstituted with CR HBECs isolated from patients with and without cystic fibrosis (CF). While conditionally reprogrammed cells only differentiate into an upper airway epithelium after 35 days at the air-liquid interface, in reconstituted lungs these cells differentiate into upper airway bronchial epithelium and lower airway alveolar structures after 12 days. Rapid scale-up and the ability to obtain clonal derivatives of primary patient-derived HBECs without the need for genetic manipulation may permit rapid reconstitution of the lung epithelium; facilitating the study of lung disease in tissue-engineered models.

Toward the development of biomimetic injectable and macroporous biohydrogels for regenerative medicine

Repairing or replacing damaged human tissues has been the ambitious goal of regenerative medicine for over 25years. One promising approach is the use of hydrated three-dimensional scaffolds, known as hydrogels, which have had good results repairing tissues in pre-clinical trials. Benefiting from breakthrough advances in the field of biology, and more particularly regarding cell/matrix interactions, these hydrogels are now designed to recapitulate some of the fundamental cues of native environments to drive the local tissue regeneration. We highlight the key parameters that are required for the development of smart and biomimetic hydrogels. We also review the wide variety of polymers, crosslinking methods, and manufacturing processes that have been developed over the years. Of particular interest is the emergence of supramolecular chemistries, allowing for the development of highly functional and reversible biohydrogels. Moreover, advances in computer assisted design and three-dimensional printing have revolutionized the production of macroporous hydrogels and allowed for more complex designs than ever before with the opportunity to develop fully reconstituted organs. Today, the field of biohydrogels for regenerative medicine is a prolific area of research with applications for most bodily tissues. On top of these applications, injectable hydrogels and macroporous hydrogels (foams) were found to be the most successful. While commonly associated with cells or biologics as drug delivery systems to increase therapeutic outcomes, they are steadily being used in the emerging fields of organs-on-chip and hydrogel-assisted cell therapy. To highlight these advances, we review some of the recent developments that have been achieved for the regeneration of tissues, focusing on the articular cartilage, bone, cardiac, and neural tissues. These biohydrogels are associated with improved cartilage and bone defects regeneration, reduced left ventricular dilation upon myocardial infarction and display promising results repairing neural lesions. Combining the benefits from each of these areas reviewed above, we envision that an injectable biohydrogel foam loaded with either stem cells or their secretome is the most promising hydrogel solution to trigger tissue regeneration. A paradigm shift is occurring where the combined efforts of fundamental and applied sciences head toward the development of hydrogels restoring tissue functions, serving as drug screening platforms or recreating complex organs.

tBHQ Suppresses Osteoclastic Resorption in Xenogeneic-Treated Dentin Matrix-Based Scaffolds

Extracellularmatrix (ECM)-based scaffolds are important for their potential therapeutic application. Treated dentin matrix (TDM), a kind of ECM, seeded with allogeneic dental follicle stem cells (TDM/aDFC) provides a suitable inductive microenvironment for tooth root regeneration. Considering the limited sources, xenogeneic TDM (xTDM) is a possible alternative to allogeneic TDM; however, xTDM-based scaffold presents severe osteolysis and resorption lacunae causing regenerated tooth root failure. Immune response-induced excessive osteoclastogenesis plays a critical role in xenogeneic scaffold osteolysis and resorption. The impact of antioxidant, tert-butylhydroquinone (tBHQ), on xTDM/aDFCs-induced osteoclastogenesis and osteoclastic resorption in vivo and in vitro are investigated. tBHQ upregulates heme oxygenase-1 release and downregulates high mobility group box 1 mRNA expression. mRNA expression of other osteoclast-related genes including nuclear factor-kappa Bp65, receptor activator of nuclear factor kappa-B, nuclear factor of activated T-cells cytoplasmic 1, cathepsin K, and integrin β3, also decreases significantly. Furthermore, tBHQ-treated xTDM/aDFCs scaffolds implanted into rhesus macaques show reduced osteolysis and osteoclastic resorption by microcomputed tomography and tartrate-resistant acid phosphatase staining. tBHQ-induced suppression of xTDM/aDFC-induced osteoclastogenesis and osteoclastic resorption presents a new strategy for the regeneration of biological tooth root and could be applied to the regeneration of other complex tissues and organs.

Biologic Scaffolds

Biologic scaffold materials composed of allogeneic or xenogeneic extracellular matrix are commonly used for the repair and functional reconstruction of injured and missing tissues. These naturally occurring bioscaffolds are manufactured by the removal of the cellular content from source tissues while preserving the structural and functional molecular units of the remaining extracellular matrix (ECM). The mechanisms by which these bioscaffolds facilitate constructive remodeling and favorable clinical outcomes include release or creation of effector molecules that recruit endogenous stem/progenitor cells to the site of scaffold placement and modulation of the innate immune response, specifically the activation of an anti-inflammatory macrophage phenotype. The methods by which ECM biologic scaffolds are prepared, the current understanding of in vivo scaffold remodeling, and the associated clinical outcomes are discussed in this article.

The application of decellularized human term fetal membranes in tissue engineering and regenerative medicine (TERM)

Tissue engineering and regenerative medicine (TERM) is a field that applies biology and engineering principles to "restore, maintain or repair a tissue after injury". Besides the potential to treat various diseases, these endeavours increase our understanding of fundamental cell biology. Although TERM has progressed rapidly, engineering a whole organ is still beyond our skills, primarily due to the complexity of tissues. Material science and current manufacturing methods are not capable of mimicking this complexity. Therefore, many researchers explore the use of naturally derived materials that maintain important biochemical, structural and mechanical properties of tissues. Consequently, employing non-cellular components of tissues, particularly the extracellular matrix, has emerged as an alternative to synthetic materials. Because of their complexity, decellularized tissues are not as well defined as synthetic materials but they provide cells with a microenvironment that resembles their natural niche. Decellularized tissues are produced from a variety of sources, among which the fetal membranes are excellent candidates since their supply is virtually unlimited, they are readily accessible with minimum ethical concerns and are often discarded as a biological waste. In this review, we will discuss various applications of decellularized fetal membranes as substrates for the expansion of stem cells, their use as two and three-dimensional scaffolds for tissue regeneration, and their use as cell delivery systems. We conclude that fetal membranes have great potential for use in TERM.

Extracellular matrix remodeling and matrix metalloproteinases (ajMMP-2 like and ajMMP-16 like) characterization during intestine regeneration of sea cucumber Apostichopus japonicus

Remodeling of extracellular matrix (ECM) regulated by matrix metalloproteinases (MMPs) is essential for tissue regeneration. In the present study, we used immunohistochemistry (IHC) techniques against ECM components to reveal changes of ECM during intestine regeneration of Apostichopus japonicus. The expression of collagen I and laminin reduced apparently from the eviscerated intestine, while fibronectin exhibited continuous expression in all regeneration stages observed. Meanwhile, we cloned two MMP genes from A. japonicus by RACE PCR. The full-length cDNA of ajMMP-2 like is 2733bp and contains a predicted open reading frame (ORF) of 1716bp encoding 572 amino acids. The full-length cDNA of ajMMP-16 like is 2705bp and contains an ORF of 1452bp encoding 484 amino acids. The predicted protein sequences of each MMP contain two conserved domains, ZnMc_MMP and HX. Homology and phylogenetic analysis revealed that ajMMP-2 like and ajMMP-16 like share high sequence similarity with MMP-2 and MMP-16 from Strongylocentrotus purpuratus, respectively. Then we investigated spatio-temporal expression of ajMMP-2 like and ajMMP-16 like during different regeneration stages by qRT-PCR and IHC. The expression pattern of them showed a roughly opposite trend from that of ECM components. According to our results, a fibronectin-dominate temporary matrix is created in intestine regeneration, and it might provide structural integrity for matrix and promote cell movement. We also hypothesize that ajMMP-2 like and ajMMP-16 like could accelerate cell migration and regulate interaction between ECM components and growth factors. This work provides new evidence of ECM and MMPs involvement in sea cucumber regeneration.

Biomimetic tendon extracellular matrix composite gradient scaffold enhances ligament-to-bone junction reconstruction

Management of ligament/tendon-to-bone-junction healing remains a formidable challenge in the field of orthopedic medicine to date, due to deficient vascularity and multi-tissue transitional structure of the junction. Numerous strategies have been employed to improve ligament-bone junction healing, including delivery of stem cells, bioactive factors, and synthetic materials, but these methods are often inadequate at recapitulating the complex structure-function relationships at native tissue interfaces. Here, we developed an easily-fabricated and effective biomimetic composite to promote the regeneration of ligament-bone junction by physically modifying the tendon extracellular matrix (ECM) into a Random-Aligned-Random composite using ultrasound treatment. The differentiation potential of rabbit bone marrow stromal cells on the modified ECM were examined in vitro. The results demonstrated that the modified ECM enhanced expression of chondrogenesis and osteogenesis-associated epigenetic genes (Jmjd1c, Kdm6b), transcription factor genes (Sox9, Runx2) and extracellular matrix genes (Col2a1, Ocn), resulting in higher osteoinductivity than the untreated tendon ECM in vitro. In the rabbit anterior cruciate ligament (ACL) reconstruction model in vivo, micro-computed tomography (Micro-CT) and histological analysis showed that the modified Random-Aligned-Random composite scaffold enhanced bone and fibrocartilage formation at the interface, more efficaciously than the unmodified tendon ECM. Therefore, these results demonstrated that the biomimetic Random-Aligned-Random composite could be a promising scaffold for ligament/tendon-bone junction repair.

STATEMENT OF SIGNIFICANCE

The native transitional region consists of several distinct yet contiguous tissue regions, composed of soft tissue, non-calcified fibrocartilage, calcified fibrocartilage, and bone. A stratified graft whose phases are interconnected with each other is essential for supporting the formation of functionally continuous multi-tissue regions. Various techniques have been attempted to improve adherence of the ligament/tendon graft to bone, including utilization of stem cells, growth factors and biomaterials, but these methods are often inadequate at recapitulating the complex structure-function relationships at native tissue interfaces. Here, we developed an easily-fabricated and effective biomimetic composite to promote the regeneration of ligament-bone junction by physically modifying the tendon extracellular matrix (ECM) into a Random-Aligned-Random composite using ultrasound treatment. The modified ECM enhanced expression of chondrogenesis and osteogenesis-associated epigenetic genes expression in vitro. In the rabbit anterior crucial ligament reconstruction model in vivo, results showed that the modified Random-Aligned-Random composite enhances the bone and fibrocartilage formation in the interface, proving to be more efficient than the unmodified tendon ECM. Therefore, these results demonstrated that the biomimetic Random-Aligned-Random composite could be a promising scaffold for ligament/tendon-bone junction repair.

Dedifferentiated Chondrocytes in Composite Microfibers As Tool for Cartilage Repair

Tissue engineering (TE) approaches using biomaterials have gain important roles in the regeneration of cartilage. This paper describes the production by microfluidics of alginate-based microfibers containing both extracellular matrix (ECM)-derived biomaterials and chondrocytes. As ECM components gelatin or decellularized urinary bladder matrix (UBM) were investigated. The effectiveness of the composite microfibers has been tested to modulate the behavior and redifferentiation of dedifferentiated chondrocytes. The complete redifferentiation, at the single-cell level, of the chondrocytes, without cell aggregate formation, was observed after 14 days of cell culture. Specific chondrogenic markers and high cellular secretory activity was observed in embedded cells. Notably, no sign of collagen type 10 deposition was determined. The obtained data suggest that dedifferentiated chondrocytes regain a functional chondrocyte phenotype when embedded in appropriate 3D scaffold based on alginate plus gelatin or UBM. The proposed scaffolds are indeed valuable to form a cellular microenvironment mimicking the in vivo ECM, opening the way to their use in cartilage TE.

Implications of Extracellular Matrix Production by Adipose Tissue-Derived Stem Cells for Development of Wound Healing Therapies

The synthesis and deposition of extracellular matrix (ECM) plays an important role in the healing of acute and chronic wounds. Consequently, the use of ECM as treatment for chronic wounds has been of special interest—both in terms of inducing ECM production by resident cells and applying ex vivo produced ECM. For these purposes, using adipose tissue-derived stem cells (ASCs) could be of use. ASCs are recognized to promote wound healing of otherwise chronic wounds, possibly through the reduction of inflammation, induction of angiogenesis, and promotion of fibroblast and keratinocyte growth. However, little is known regarding the importance of ASC-produced ECM for wound healing. In this review, we describe the importance of ECM for wound healing, and how ECM production by ASCs may be exploited in developing new therapies for the treatment of chronic wounds.

Injectable hydrogels for cartilage and bone tissue engineering

Tissue engineering has become a promising strategy for repairing damaged cartilage and bone tissue. Among the scaffolds for tissue-engineering applications, injectable hydrogels have demonstrated great potential for use as three-dimensional cell culture scaffolds in cartilage and bone tissue engineering, owing to their high water content, similarity to the natural extracellular matrix (ECM), porous framework for cell transplantation and proliferation, minimal invasive properties, and ability to match irregular defects. In this review, we describe the selection of appropriate biomaterials and fabrication methods to prepare novel injectable hydrogels for cartilage and bone tissue engineering. In addition, the biology of cartilage and the bony ECM is also summarized. Finally, future perspectives for injectable hydrogels in cartilage and bone tissue engineering are discussed.

Future Prospects for Human Tissue Engineered Urethra Transplantation: Decellularization and Recellularization-Based Urethra Regeneration

To evaluate the histological characteristics of decellularized human urethra after transplantation into the rat omentum and compare in vivo cell seeding with perfusion-based and cell sheet urethral regeneration. Eight adult human male urethras accompanied with the surrounding corpus spongiosum were obtained. The tissues were decellularized with detergent-based method. The efficacy of decellularization and extracellular matrix preservation was evaluated by several techniques. Decellularized scaffolds were transplanted into the omentum of 12 male rats and located into the scrotum. Biopsies were taken 1, 3, and 6 months postoperatively to assess the natural recellularization. Mesenchymal stem cells obtained from preputial tissue were seeded with perfusion-based and cell sheet techniques as well. Immunohistochemical staining with α-actin, cytokeratin AE1/AE3, synaptophysin, and CD31 antibodies were performed. Removal of nuclear components and preservation of biomechanical properties was confirmed. In-vivo recellularization revealed promising results in progressive angiogenesis and cell seeding of epithelium-like cells in the lining of the urethra as well as smooth muscle cells in the wall structure. In-vitro urethral regeneration revealed that cell sheet engineering was the technique of choice compared to perfusion-based technique. This study may paw the road for clinical application of acellular urethral matrix with the surrounding corpus spongiosum in urological reconstructive surgery.

Effects of age-related shifts in cellular function and local microenvironment upon the innate immune response to implants

The host macrophage response is now well recognized as a predictor of the success or failure of biomaterial implants following placement. More specifically, shifts from an "M1" pro-inflammatory towards a more "M2-like" anti-inflammatory macrophage polarization profile have been shown to result in enhanced material integration and/or tissue regeneration downstream. As a result, a number of biomaterials-based approaches to controlling macrophage polarization have been developed. However, the ability to promote such activity is predicated upon an in-depth, context-dependent understanding of the host response to biomaterials. Recent work has shown the impacts of both tissue location and tissue status (i.e. underlying pathology) upon the host innate immune response to implants, representing a departure from a focus upon implant material composition and form. Thus, the ideas of "biocompatibility," the host macrophage reaction, and ideal material requirements and modification strategies may need to be revisited on a patient, tissue, and disease basis. Immunosenescence, dysregulation of macrophage function, and delayed resolution of immune responses in aged individuals have all been demonstrated, suggesting that the host response to biomaterials in aged individuals should differ from that in younger individuals. However, despite the increasing usage of implantable medical devices in aged patients, few studies examining the effects of aging upon the host response to biomaterials and the implications of this response for long-term integration and function have been performed. The objective of the present manuscript is to review the putative effects of aging upon the host response to implanted materials and to advance the hypothesis that age-related changes in the local microenvrionement, with emphasis on the extracellular matrix, play a previously unrecognized role in determining the host response to implants.