Microextraction of drugs

A new method for determination of myricetin and quercetin using solid phase microextraction-high performance liquid chromatography-ultra violet/visible system in grapes, vegetables and red wine samples

A new approach for the extraction and determination of myricetin and quercetin by using SPME-HPLC-UV system has been developed. The method involves adsorption of flavonoids on CAR/TPR fiber followed by desorption in the desorption chamber of SPME-HPLC interface using citrate buffer (0.001 M):acetonitrile (70:30) as mobile phase and UV detection at 372 nm. The detection limits for myricetin and quercetin are 48.3 and 24.7 pgmL(-1), respectively. The proposed method was validated by determining myricetin and quercetin in tomato, onion, grapes and red wine samples.

Liquid-phase microextraction combined with high-performance liquid chromatography for the enantioselective analysis of mefloquine in plasma samples

A simple and rapid method, which involves liquid-phase microextraction (LPME) followed by HPLC analysis using Chiralpak AD column and UV detection, was developed for the enantioselective determination of mefloquine in plasma samples. Several factors that influence the efficiency of three-phase LPME were investigated and optimized. Under the optimal extraction conditions, the mean recoveries were 33.2 and 35.0% for (-)-(SR-)-mefloquine and (+)-(RS)-mefloquine, respectively. The method was linear over 50-1500 ng/ml range. Within-day and between-day assay precision and accuracy were below 15% for both enantiomers at concentrations of 150, 600 and 1200 ng/ml. Furthermore, no racemization or degradation were seen with the method described.

Determination of organochlorine pesticides in water using solvent cooling assisted dynamic hollow-fiber-supported headspace liquid-phase microextraction

The organic solvent film formed within a hollow fiber was used as an extraction interface in the headspace liquid-phase microextraction (HS-LPME) of organochlorine pesticides. Some common organic solvents with different vapor pressures (9.33-12,918.9 Pa) were studied as extractants. The results indicated that even the solvent with the highest vapor pressure (cyclohexane) can be used to carry out the extraction successfully. However, those compounds (analytes) with low vapor pressures could not be extracted successfully. In general, the large surface area of the hollow fiber can hasten the extraction speed, but it can increase the risk of solvent loss. Lowering the temperature of the extraction solvent could not only reduce solvent loss (by lowering its vapor pressure) but also extend the feasible extraction time to improve extraction efficiency. In this work, a solvent cooling assisted dynamic hollow-fiber-supported headspace liquid-phase microextraction (SC-DHF-HS-LPME) approach was developed. By lowering the temperature of the solvent, the evaporation can be decreased, the extraction time can be lengthened, and, on the contrary, the equilibrium constant between headspace phase and extraction solvent can be increased. In dynamic LPME, the extracting solvent is held within a hollow fiber, affixed to a syringe needle and placed in the headspace of the sample container. The extracting solvent within the fiber is moved to-and-fro by using a programmable syringe pump. The movement facilitates mass transfer of analyte(s) from the sample to the solvent. Analysis of the extract was carried out by gas chromatography-mass spectrometry (GC-MS). The effects of identity of extraction solvent, extraction temperature, sample agitation, extraction time, and salt concentration on extraction performance were also investigated. Good enrichments were achieved (65-211-fold) with this method. Good repeatabilities of extraction were obtained, with RSD values below 15.2%. Detection limits were 0.209 microg/l or lower.

Analysis of tricyclic antidepressant drugs in plasma by means of solid-phase microextraction-liquid chromatography-mass spectrometry

Solid-phase microextraction coupled to liquid chromatography and mass spectrometry (SPME-LC-MS) was used to analyze tricyclic antidepressant drugs desipramine, imipramine, nortriptyline, amitriptyline, and clomipramine (internal standard) in plasma samples. SPME was performed by direct extraction on a PDMS/DVB (60 microm) coated fiber, employing a stirring rate of 1200 rpm for 30 min, pH 11.0, and temperature of 30 degrees C. Drug desorption was carried out by exposing the fiber to the liquid chromatography mobile phase for 20 min, using a labmade SPME-LC interface at 50 degrees C. The main variables experimentally influencing LC-MS response were evaluated and mathematically modeled. A rational optimization with fewer experiments was achieved using a factorial design approach. The constructed empirical models were adjusted with 96-98% of explained deviation allowing an adequate data set comprehension. The chromatographic separation was realized using an RP-18 column (150 mm x 2.1 mm, 5 microm particles) and ammonium acetate buffer (0.01 mol/l, pH 5.50) : acetonitrile (50 : 50 v/v) as mobile phase. Low detection levels were achieved with electrospray interface (0.1 ng/ml). The developed method showed specificity, linearity, precision, and limit of quantification adequate to assay tricyclic antidepressant drugs in plasma.

Solid phase microextraction of macrolide, trimethoprim, and sulfonamide antibiotics in wastewaters

In this work, we optimize a solid phase microextraction (SPME) method for the simultaneous collection of antibiotics (sulfonamides, macrolides, and trimethoprim) present in wastewaters. The performance of the SPME method is compared to a solid phase extraction (SPE) method. Analytes in both cases were quantified by high performance liquid chromatography-tandem mass spectrometry (HPLC-MS-MS) with electrospray ionization. The advantages offered by SPME in this application are: decreased sample volume requirements, ease of sample processing and extraction, decreased cost, and most importantly, elimination of electrospray matrix effects. Despite having higher limits of quantification (16-1380 ng/L in influent and 35-260 ng/L in effluent), nearly all of the compounds found to be present in Edmonton Gold Bar wastewater by SPE were measurable by SPME (i.e., sulfamethoxazole, trimethoprim, erythromycin, and clarithromycin), with values similar to those obtained using the former method. Limits of quantification for the SPE method for the measured compounds were 4.7-15 ng/L and 0.86-6.1 ng/L for influent and effluent, respectively.

Theoretical analysis and experimental evaluation of headspace in-drop derivatisation single-drop microextraction using aldehydes as model analytes

In-drop derivatisation single-drop microextraction approach can constitute, to a certain degree, a low-cost reasonable alternative to the well-known on-fibre solid-phase microextraction. The headspace mode integrates extraction, preconcentration and derivatisation into a single step from the headspace of a sample. In this study, two low-molecular-weight aldehydes are derivatised in a hanging drop containing 2,4,6-trichlorophenylhydrazine, in a headspace single-drop microextraction configuration system. The single organic drop, dispersed in gas phase, is well covered in this study as a locale of the main reaction. The measurement of diffusion and kinetic parameters and their relationship were designed to reveal, for the first time, inherent mechanistic aspects in such an analytical system. The two-film theory of mass transfer is used to discuss the mechanism along with the calculation of characteristic times and specific rates of absorption. All these, together with certain experimental data may ascertain whether the overall process is reaction rate dependent or limited by mass transfer in the gas phase, at the air-water and air-organic interface or in the organic phase. The descriptors of mass transfer and chemical reaction in a single drop are critically reviewed and reconsidered and the practical aspects for the analysis of volatile organic compounds are highlighted. Relative standard deviations for both aldehydes were 3.4% (n=5) and 4.9% (n=5) for 1 microM of hexanal and 0.3 microM of formaldehyde, respectively. Detection limits for aqueous samples were 0.1 and 0.03 microM for formaldehyde and hexanal, respectively.

The analysis of estrone and 17β-estradiol by stir bar sorptive extraction–thermal desorption–gas chromatography/mass spectrometry: Application to urine samples after oral administration of conjugated equine estrogens

The development of a sensitive and solvent-free method for the measurement of estrone (E(1)) and 17beta-estradiol (17beta-E(2)) in human urine samples is described. The deconjugated estrogens were derivatized in situ with acetic acid anhydride and the derivatives were extracted directly from the aqueous samples using stir bar sorptive extraction (SBSE). The compounds containing a secondary alcohol function are further derivatized by headspace acylation prior to thermal desorption and gas chromatography/mass spectrometry (GC/MS). A number of experimental parameters, including salt addition, temperature and time, were optimized to increase the recovery of E(1) and 17beta-E(2) by SBSE. The derivatization reactions were also optimized to obtain the highest yields of the acylated estrogens. Detection limits of 0.02 and 0.03 ng mL(-1) were obtained for E(1) and 17beta-E(2), respectively. The method was applied to determine the effect of conjugated equine estrogen intake on the excretion of E(1) and 17beta-E(2) in human urine samples. Increased levels of the endogenous estrogens were detected after administering a standard dose of Premarin to a female volunteer. Routine monitoring of estrogen levels is recommended to avoid a high urinary excretion of E(1) and 17beta-E(2), nowadays enlisted as endocrine disrupting chemicals (EDCs), during hormone replacement therapy.

Oxidized multiwalled carbon nanotubes as a novel solid-phase microextraction fiber for determination of phenols in aqueous samples

A simple and environmentally friendly method for determination of seven phenols using solid-phase microextraction (SPME) coupled to high-performance liquid chromatography (HPLC) has been developed. Several materials were used as stationary phase of SPME fibers and an oxidized multiwalled carbon nanotubes material was found to be effective in carrying out simultaneous extraction of phenols in aqueous samples. Compared with the widely used commercially available SPME fibers, this proposed fiber had much lower cost, longer lifetime (over 150 times), shorter analysis time (30 min of extraction and 3 min of desorption time) and comparable or superior extraction efficiency for the investigated analytes. The extraction and desorption conditions were evaluated and the calibration curves of seven phenols were linear (R(2)> or =0.9908) in the range from 10.2 to 1585 ng mL(-1). The limits of detection at a signal-to-noise (S/N) ratio of 3 were 0.25-3.67 ng mL(-1), and the limits of quantification calculated at S/N=10 were 0.83-12.25 ng mL(-1) for these compounds. The possibility of applying the proposed method to environmental water samples analysis was validated.

Stereoselective determination of hydroxychloro-quine and its major metabolites in human urine by solid-phase microextraction and HPLC

The enantioselective analysis of hydroxychloroquine (HCQ) and its major metabolites was achieved by HPLC and solid-phase microextraction. The chromatographic separation was performed on a Chiralcel OD-H column using hexane/methanol/ethanol (96:2:2, v/v/v) plus 0.2% diethylamine as the mobile phase, at the flow rate of 1.3 mL/min. The main extraction parameters were optimized. The best condition was achieved by the addition of 10% NaCl and 1 mL phosphate buffer 1 mol/L pH 11 to 3 mL human urine. The extraction was conducted for 40 min at 25 degrees C and the desorption time was 3 min using methanol (100%). PDMS-DVB 60 microm fiber was used in this study. The mean recoveries were 9.3, 9.2, and 14.4% for HCQ, desethylhydroxychloroquine (DHCQ), and desethylchloroquine (DCQ), respectively. The method was linear over the range of 50-1000 ng/mL for HCQ enantiomers and over the range of 42-416 ng/mL for DCQ and DHCQ enantiomers. Within-day and between-day precision and accuracy assays for HCQ and its metabolites were lower than 15%. The preliminary 48 h urinary excretion study performed in human urine showed to be stereoselective. The amount of (+)-(S)-enantiomer excreted was higher than its antipode.

Application of Porous Membrane-Protected Micro-Solid-Phase Extraction Combined with HPLC for the Analysis of Acidic Drugs in Wastewater

This report describes the use of a porous membrane-protected micro-solid-phase extraction (micro-SPE) procedure to extract acidic drugs from wastewater that are then determined by high-performance liquid chromatography with ultraviolet detection. The micro-SPE device consists of C18 sorbent held within a membrane envelope made of polypropylene. Ketoprofen and ibuprofen were selected as model compounds, and extraction parameters were optimized. Correlation coefficients of 0.9980 and 0.9953 were obtained for ketoprofen and ibuprofen, respectively, across a concentration range of 1-250 microg/L. Relative extraction recoveries were between 94 and 112%. The relative standard deviation of the analytical method ranged between 2 and 10%, respectively. The method detection limits for these target analytes in wastewater ranged from 0.03 to 0.08 microg/L. When compared to conventional solid-phase extraction (SPE), this new method showed better detection limits with good reproducibility. The results shows that this micro-SPE technique is a feasible alternative to multistep SPE for the extraction of analytes in complex samples.

Recent developments in headspace microextraction techniques for the analysis of environmental contaminants in different matrices

Headspace microextraction procedures such as solid-phase microextraction (SPME) and single drop microextraction (SDME) or liquid-phase microextraction (LPME) are increasingly used for the extraction of environmental organic pollutants from a variety of aqueous, viscous, semisolid and solid environmental and biological matrices. In this article, recent analytical applications of these methodologies when used as an isolation and trace enrichment step prior to the analysis of organic pollutants (pesticides, polycyclic aromatic hydrocarbons, polychlorinated compounds, organotin compounds, phenolic derivatives, aromatic amines, phthalates, etc.) by gas and liquid chromatography are reviewed. The applicability and inherent limitations of headspace microextraction are also discussed. The future direction of research in this field and general trends toward commercial applications are considered.

Novel analytical procedures for screening of drug residues in water, waste water, sediment and sludge

Traces of pharmaceuticals are continuously introduced into the aquatic environment mainly by sewage treatment plant effluents. Final data about their impact on the ecosystem are still partly missing. Progress in instrumental analytical chemistry has resulted in the availability of methods that allow a monitoring of these pollutants at ng L(-1) levels. In this review the state-of-the-art of residue analysis of pharmaceuticals by chromatographic and electrophoretic techniques is summarized. Improvements in detection limits over the past years have mainly been due to sophisticated mass spectrometric detection techniques. Furthermore, robust sample preparation and preconcentration protocols based on solid-phase extraction and related procedures have contributed significantly to the achievements observed so far. This review also covers several immunochemical approaches which may serve as an inexpensive alternative for quick screening of samples.

Sample preparation techniques for the determination of trace residues and contaminants in foods

The determination of trace residues and contaminants in complex matrices, such as food, often requires extensive sample extraction and preparation prior to instrumental analysis. Sample preparation is often the bottleneck in analysis and there is a need to minimise the number of steps to reduce both time and sources of error. There is also a move towards more environmentally friendly techniques, which use less solvent and smaller sample sizes. Smaller sample size becomes important when dealing with real life problems, such as consumer complaints and alleged chemical contamination. Optimal sample preparation can reduce analysis time, sources of error, enhance sensitivity and enable unequivocal identification, confirmation and quantification. This review considers all aspects of sample preparation, covering general extraction techniques, such as Soxhlet and pressurised liquid extraction, microextraction techniques such as liquid phase microextraction (LPME) and more selective techniques, such as solid phase extraction (SPE), solid phase microextraction (SPME) and stir bar sorptive extraction (SBSE). The applicability of each technique in food analysis, particularly for the determination of trace organic contaminants in foods is discussed.

Determination of cortisol in human saliva by automated in-tube solid-phase microextraction coupled with liquid chromatography–mass spectrometry

We developed a simple, rapid, and sensitive method for determination of cortisol levels in human saliva. Cortisol was analyzed by on-line in-tube solid-phase microextraction (SPME) coupled with liquid chromatography-mass spectrometry (LC/MS). Cortisol was separated within 5 min by HPLC using an Eclipse ZDB-C8 column and 1% acetic acid/methanol (50/50, v/v) at a flow rate of 0.2 mL/min. Electrospray ionization conditions in the positive ion mode were optimized for MS detection of cortisol. The optimum in-tube SPME conditions were 20 draw/eject cycles with a sample size of 40 microL using a Supel Q PLOT capillary column as the extraction device. The extracted compounds could be desorbed easily from the capillary by passage of the mobile phase, and no carryover was observed. Using the in-tube SPME LC/MS method, good linearity of the calibration curve (r=0.9977) was obtained in the concentration range 50-2000 pg/mL of cortisol in saliva, and the limit of detection (S/N=3) was 5 pg/mL. The method described here showed 48-fold higher sensitivity than the direct injection method (5 microL injection). The within-run and between-day precisions (relative standard deviations) were below 4.6% and 8.9% (n=5), respectively. This method was applied successfully to the analysis of saliva samples without interference peaks. The recoveries of cortisol spiked into saliva samples were above 95%, and the relative standard deviations were below 6.0%. This method was used to analyze the changes in salivary cortisol level according to stress load.

Electrochemiluminescent detection based on solid-phase extraction at tris(2,2'-bipyridyl)ruthenium(II)-modified ceramic carbon electrode

A sensitive electrochemiluminescent detection scheme by solid-phase extraction at Ru(bpy)3(2+)-modified ceramic carbon electrodes (CCEs) was developed. The as-prepared Ru(bpy)3(2+)-modified CCEs show much better long-term stability than other Nafion-based Ru(bpy)3(2+)-modified electrodes and enjoy the inherent advantages of CCEs. The log-log calibration plot for dioxopromethazine is linear from 1.0 x 10(-9) to 1.0 x 10(-4) mol L(-1) using the new detection scheme. The detection limit is 6.6 x 10(-10) mol L(-1) at a signal-to-noise ratio of 3. The new scheme improves the sensitivity by approximately 3 orders of magnitude, which is the most sensitive Ru(bpy)3(2+) ECL method. The scheme allows the detection of dioxopromethazine in a urine sample within 3 min. Since Ru(bpy)3(2+) ECL is a powerful technique for determination of numerous amine-containing substances, the new detection scheme holds great promise in measurement of free concentrations, investigation of protein-drug interactions and DNA-drug interactions, pharmaceutical analysis, and so on.

Analysis of abietic acid and dehydroabietic acid in food samples by in-tube solid-phase microextraction coupled with liquid chromatography-mass spectrometry

A simple and sensitive method for the determination of abietic acid and dehydroabietic acid in food samples was developed using a fully automated method consisting of in-tube solid-phase microextraction (SPME) coupled with liquid chromatography-mass spectrometry (LC/MS). These compounds were separated within 5min by HPLC using an ODS-3 column and 5mM ammonium formate/acetonitrile (10/90, v/v). Electrospray ionization conditions in the negative ion mode were optimized for MS detection of abietic acid and dehydroabietic acid. The optimum in-tube SPME conditions were 20draw/eject cycles of 40microL of sample using a Supel Q PLOT capillary column as an extraction device. The extracted compounds were easily desorbed from the capillary by passage of the mobile phase, and no carryover was observed. Using the in-tube SPME LC/MS method, good linearity of the calibration curve (r>0.9998) was obtained in the concentration range from 0 to 50ng/mL, and the detection limits (S/N=3) of abietic acid and dehydroabietic acid were 2.9 and 2.1pg/mL, respectively. The in-tube SPME method showed above 75-fold greater sensitivity than the direct injection method (5microL injection). This method was applied successfully to analysis of food samples without interference peaks. The recoveries of abietic acid and dehydroabietic acid spiked into liquid samples were above 79%, and the relative standard deviations were below 6.6%. These compounds were detected at ng/mL or ng/g levels in various liquid or solid food samples contacted with paper.

Fast determination of paeonol in plasma by headspace solid-phase microextraction followed by gas chromatography–mass spectrometry

Paeonol is the active component in the traditional Chinese medicines (TCMs), such as Cynanchum paniculatum, which has been used to treat many diseases, such as eczema. In this work, a simple, rapid and sensitive method was developed for the determination of paeonol in rabbit plasma, which was based on headspace solid-phase microextraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS). The extraction parameters of fiber coating, sample temperature, extraction time, stirring rate and ion strength were systemically optimized; the method linearity, detection limit and precision were also investigated. It was shown that the proposed method provided a good linearity (0.02-20 microg mL(-1), R(2)>0.990), low detection limit (2.0 ng mL(-1)) and good precision (R.S.D. value less than 8%). Finally, GC/MS following HS-SPME was applied to fast determination of paeonol in rabbit plasma at different time point after oral demonstration of Cynanchum paniculatum essential oil. The experimental results suggest that the proposed method provided an alternative and novel approach to the pharmacokinetics study of paeonol in the TCMs.

Determination of phenols in environmental water samples by ionic liquid-based headspace liquid-phase microextraction coupled with high-performance liquid chromatography

Headspace liquid-phase microextraction (HS-LPME) has been applied to efficient enrichment of phenols such as 2-nitrophenol, 4-chlorophenol, 2,4-dichlorophenol, and 2-naphthol from water samples based on 1-butyl-3-methylimidazolium hexafluorophosphate ([C4MIM][PF6]) as an extractant. Some parameters that may influence HS-LPME were investigated. The linear range was in the range of 0.5-100 microg/L, and the enrichment factors and repeatability (RSD, n = 6) of the proposed method were in the range of 17.2-160.7 and 5.4-8.9%, respectively. The detection limit for each analyte ranged from 0.3 to 0.5 microg/L. Complex matrices of environmental water samples had a small effect on the enrichment, and this problem could be resolved by the addition of sodium ethylene diamine tetraacetate (EDTA) into the samples. The spiked recoveries were in the range of 89.4-114.2%. All these facts demonstrated that the proposed method, with merits of low cost, simplicity, and easy operation, would be a competitive alternative procedure for the determination of such compounds at trace level.

Determination of cocaine and cocaethylene in plasma by solid-phase microextraction and gas chromatography-mass spectrometry

The present paper describes a method for the simultaneous determination of cocaine and cocaethylene in plasma. It was based in the extraction of the analytes by solid-phase microextraction (SPME), and gas chromatography-mass spectrometry (GC-MS) was used to identify and quantify the analytes in selected ion monitoring (SIM) mode. The method showed to be very simple, rapid and sensitive. The method was validated for the two compounds, including linearity (range 25-1000 ng/mL) and the main precision parameters. It was applied to ten plasma samples from cocaine and alcohol users, obtaining positive results in all cases.

Micro-extraction techniques in analytical toxicology: short review

This paper discusses new developments in plasma micro-extraction techniques in the context of established micro-extraction and protein precipitation methodology. Simple liquid-liquid solvent extraction (LLE) of plasma with direct GC or HPLC analysis of the resulting extract has been used for many years. Butyl acetate and methyl t-butyl ether (MTBE) give efficient extraction of many drugs and metabolites from small volumes of plasma or whole blood at an appropriate pH, and form the upper layer, thus simplifying extract removal. Butyl acetate does not interfere with NPD, ECD or MS in GC, whilst MTBE has a relatively low UV cutoff (220 nm). Thus, HPLC eluents that use a high proportion of an organic component allow MTBE extracts to be analysed directly. 'Salting-out' and extractive derivatization using acetic anhydride or phenylboronic acid can be used with appropriate analytes. As regards protein precipitation, an important consideration is lowering the pH, although this is not feasible with acid-labile analytes. More recent developments include sold-phase micro-extraction (SPME) and liquid-phase micro-extraction (LPME). This latter technique especially may prove invaluable as analytes that cannot easily be extracted with LLE can be isolated simply at low cost with a minimum of apparatus.

Extraction of hydroxyaromatic compounds in river water by liquid–liquid–liquid microextraction with automated movement of the acceptor and the donor phase

Liquid-liquid-liquid microextraction with automated movement of the acceptor and the donor phase technique is described for the extraction of six hydroxyaromatic compounds in river water using a disposable and ready to use hollow fiber. Separation and quantitative analyses were performed using LC with UV detection at 254 nm. Analytes were extracted from the acidified sample solution (donor phase) into the organic solvent impregnated in the pores of the hollow fiber and then back extracted into the alkaline solution (acceptor phase) inside the lumen of the hollow fiber. The fiber was held by a conventional 10 microL LC syringe. The acceptor phase was sandwitched between the plunger and a small volume of the organic solvent (microcap). The acceptor solution was repeatedly moved in and out of the hollow fiber using a syringe pump. This movement provides a fresh acceptor phase to come in contact with the organic phase and thus enhancing extraction kinetics thereby leading to the improvement in enrichment of the analytes. The microcap separates the acceptor phase and the donor phase in addition to being partially responsible for mass transfer of the analytes from the donor solution to the acceptor solution. Under stirring, a fresh donor phase will enter through the open end of the fiber that will also contribute to the mass transfer. Various parameters affecting the extraction efficiency viz type of organic solvent, extraction time, stirring speed, effect of sodium chloride, and concentration of donor and acceptor phases were studied. RSD (3.9-5.6%), correlation coefficient (0.995-0.997), detection limit (2.0-51.2 ng/mL), enrichment factor (339-630), relative recovery (93.2-97.9%), and absolute recovery (33.9-63.0%) have also been investigated. The developed method was applied for the analysis of river water.