Nanowire-bacteria hybrids for unassisted solar carbon dioxide fixation to value-added chemicals

Electrolytic CO2 Reduction in Tandem with Oxidative Organic Chemistry

Electrochemical reduction of CO2 into carbon-based products using excess clean electricity is a compelling method for producing sustainable fuels while lowering CO2 emissions. Previous electrolytic CO2 reduction studies all involve dioxygen production at the anode, yet this anodic reaction requires a large overpotential and yields a product bearing no economic value. We report here that the cathodic reduction of CO2 to CO can occur in tandem with the anodic oxidation of organic substrates that bear higher economic value than dioxygen. This claim is demonstrated by 3 h of sustained electrolytic conversion of CO2 into CO at a copper-indium cathode with a current density of 3.7 mA cm-2 and Faradaic efficiency of >70%, and the concomitant oxidation of an alcohol at a platinum anode with >75% yield. These results were tested for four alcohols representing different classes of alcohols and demonstrate electrolytic reduction and oxidative chemistry that form higher-valued carbon-based products at both electrodes.

Performance of different Sporomusa species for the microbial electrosynthesis of acetate from carbon dioxide

Sporomusa ovata DSM-2662 produces high rate of acetate during microbial electrosynthesis (MES) by reducing CO₂ with electrons coming from a cathode. Here, we investigated other Sporomusa for MES with cathode potential set at -690mVvsSHE to establish if this capacity is conserved among this genus and to identify more performant strains. S. ovata DSM-2663 produced acetate 1.8-fold faster than S. ovata DSM-2662. On the contrary, S. ovata DSM-3300 was 2.7-fold slower whereas Sporomusa aerivorans had no MES activity. These results indicate that MES performance varies among Sporomusa. During MES, electron transfer from cathode to microbes often occurs via H₂. To establish if efficient coupling between H₂ oxidation and CO₂ reduction may explain why specific acetogens are more productive MES catalysts, the metabolisms of the investigated Sporomusa were characterized under H₂:CO₂. Results suggest that other phenotypic traits besides the capacity to oxidize H₂ efficiently are involved.

Building a bio-based industry in the Middle East through harnessing the potential of the Red Sea biodiversity

The incentive for developing microbial cell factories for production of fuels and chemicals comes from the ability of microbes to deliver these valuable compounds at a reduced cost and with a smaller environmental impact compared to the analogous chemical synthesis. Another crucial advantage of microbes is their great biological diversity, which offers a much larger "catalog" of molecules than the one obtainable by chemical synthesis. Adaptation to different environments is one of the important drives behind microbial diversity. We argue that the Red Sea, which is a rather unique marine niche, represents a remarkable source of biodiversity that can be geared towards economical and sustainable bioproduction processes in the local area and can be competitive in the international bio-based economy. Recent bioprospecting studies, conducted by the King Abdullah University of Science and Technology, have established important leads on the Red Sea biological potential, with newly isolated strains of Bacilli and Cyanobacteria. We argue that these two groups of local organisms are currently most promising in terms of developing cell factories, due to their ability to operate in saline conditions, thus reducing the cost of desalination and sterilization. The ability of Cyanobacteria to perform photosynthesis can be fully exploited in this particular environment with one of the highest levels of irradiation on the planet. We highlight the importance of new experimental and in silico methodologies needed to overcome the hurdles of developing efficient cell factories from the Red Sea isolates.

Solar Fuels and Solar Chemicals Industry

Two decades of solar energy research, since the "Holy Grails" Account on Artificial Photosynthesis, has delivered astounding discovery that sets the stage for a paradigm shift from a fuels and chemicals industry powered by fossil fuels to one powered by the sun.

Cyborgian Material Design for Solar Fuel Production: The Emerging Photosynthetic Biohybrid Systems

Photosynthetic biohybrid systems (PBSs) combine the strengths of inorganic materials and biological catalysts by exploiting semiconductor broadband light absorption to capture solar energy and subsequently transform it into valuable CO₂-derived chemicals by taking advantage of the metabolic pathways in living organisms. In this work, we first traverse through a brief history of recent PBSs, demonstrating the modularity and diversity of possible architectures to rival and, in many cases, surpass the performance of chemistry or biology alone before envisioning the future of these hybrid systems, opportunities for improvement, and its role in sustainable living here on earth and beyond.

Photoelectrochemical Reduction of Carbon Dioxide to Methanol through a Highly Efficient Enzyme Cascade

Natural photosynthesis is an effective route for the clean and sustainable conversion of CO₂ into high-energy chemicals. Inspired by the natural process, a tandem photoelectrochemical (PEC) cell with an integrated enzyme-cascade (TPIEC) system was designed, which transfers photogenerated electrons to a multienzyme cascade for the biocatalyzed reduction of CO₂ to methanol. A hematite photoanode and a bismuth ferrite photocathode were applied to fabricate the iron oxide based tandem PEC cell for visible-light-assisted regeneration of the nicotinamide cofactor (NADH). The cell utilized water as an electron donor and spontaneously regenerated NADH. To complete the TPIEC system, a superior three-dehydrogenase cascade system was employed in the cathodic part of the PEC cell. Under applied bias, the TPIEC system achieved a high methanol conversion output of 220 μm h^-1 , 1280 μmol g^-1  h^-1 using readily available solar energy and water.

Synthetic photosynthetic consortia define interactions leading to robustness and photoproduction

BACKGROUND

Microbial consortia composed of autotrophic and heterotrophic species abound in nature, yet examples of synthetic communities with mixed metabolism are limited in the laboratory. We previously engineered a model cyanobacterium, Synechococcus elongatus PCC 7942, to secrete the bulk of the carbon it fixes as sucrose, a carbohydrate that can be utilized by many other microbes. Here, we tested the capability of sucrose-secreting cyanobacteria to act as a flexible platform for the construction of synthetic, light-driven consortia by pairing them with three disparate heterotrophs: Bacillus subtilis, Escherichia coli, or Saccharomyces cerevisiae. The comparison of these different co-culture dyads reveals general design principles for the construction of robust autotroph/heterotroph consortia.

RESULTS

We observed heterotrophic growth dependent upon cyanobacterial photosynthate in each co-culture pair. Furthermore, these synthetic consortia could be stabilized over the long-term (weeks to months) and both species could persist when challenged with specific perturbations. Stability and productivity of autotroph/heterotroph co-cultures was dependent on heterotroph sucrose utilization, as well as other species-independent interactions that we observed across all dyads. One destabilizing interaction we observed was that non-sucrose byproducts of oxygenic photosynthesis negatively impacted heterotroph growth. Conversely, inoculation of each heterotrophic species enhanced cyanobacterial growth in comparison to axenic cultures. Finally, these consortia can be flexibly programmed for photoproduction of target compounds and proteins; by changing the heterotroph in co-culture to specialized strains of B. subtilis or E. coli we demonstrate production of alpha-amylase and polyhydroxybutyrate, respectively.

CONCLUSIONS

Enabled by the unprecedented flexibility of this consortia design, we uncover species-independent design principles that influence cyanobacteria/heterotroph consortia robustness. The modular nature of these communities and their unusual robustness exhibits promise as a platform for highly-versatile photoproduction strategies that capitalize on multi-species interactions and could be utilized as a tool for the study of nascent symbioses. Further consortia improvements via engineered interventions beyond those we show here (i.e., increased efficiency growing on sucrose) could improve these communities as production platforms.

Solar-to-chemical and solar-to-fuel production from CO2 by metabolically engineered microorganisms

Recent development of carbon capture utilization (CCU) for reduction of greenhouse gas emission are reviewed. In the case of CO₂ utilization, I describe development of solar-to-chemical and solar-to-fuel technology that refers to the use of solar energy to convert CO₂ to desired chemicals and fuels. Photoautotrophic cyanobacterial platforms have been extensively developed on this principle, producing a diverse range of alcohols, organic acids, and isoprenoids directly from CO₂. Recent breakthroughs in the metabolic engineering of cyanobacteria were reviewed. In addition, adoption of the light harvesting mechanisms from nature, photovoltaics-derived water splitting technologies have recently been integrated with microbial biotechnology to produce desired chemicals. Studies on the integration of electrode material with next-generation microbes are showcased for alternative solar-to-chemical and solar-to-fuel platforms.

Spatial separation of the hydrogen evolution center from semiconductors using a freestanding silica-sphere-supported Pt composite

A heterogeneous material based on silica-sphere-supported Pt nanoparticles was designed and used as an efficient freestanding hydrogen evolution cocatalyst for semiconductor photocatalysts.

Hybrid photosynthesis-powering biocatalysts with solar energy captured by inorganic devices

The biological reduction of CO₂ driven by sunlight via photosynthesis is a crucial process for life on earth. However, the conversion efficiency of solar energy to biomass by natural photosynthesis is low. This translates in bioproduction processes relying on natural photosynthesis that are inefficient energetically. Recently, hybrid photosynthetic technologies with the potential of significantly increasing the efficiency of solar energy conversion to products have been developed. In these systems, the reduction of CO₂ into biofuels or other chemicals of interest by biocatalysts is driven by solar energy captured with inorganic devices such as photovoltaic cells or photoelectrodes. Here, we explore hybrid photosynthesis and examine the strategies being deployed to improve this biotechnology.

Iodide-Photocatalyzed Reduction of Carbon Dioxide to Formic Acid with Thiols and Hydrogen Sulfide

The photolysis of iodide anions promotes the reaction of carbon dioxide with hydrogen sulfide or thiols to quantitatively yield formic acid and sulfur or disulfides. The reaction proceeds in acetonitrile and aqueous solutions, at atmospheric pressure and room temperature by irradiation using a low-pressure mercury lamp. This transition-metal-free photocatalytic process for CO₂ capture coupled with H₂ S removal may have been relevant as a prebiotic carbon dioxide fixation.

The bioelectrosynthesis of acetate

Risks associated with climate change are driving the search for new technologies to produce fuels and chemicals. The microbial electrosynthesis of chemical compounds, using electricity and CO₂ as feedstock and microbes to deliver the catalysts, has the potential to be one of those technologies. Central to the production of multicarbon compounds by this process is the bioelectrosynthesis of acetate (electroacetogenesis), and significant improvements in productivity and insightful discoveries concerning the extracellular transfer of electrons to the acetogenic microorganisms have been made recently. This review examines these advances and how they are influencing the development of microbial electrosynthesis into a new biotechnology for the sustainable production of fuels and chemicals.

Spectroscopic elucidation of energy transfer in hybrid inorganic-biological organisms for solar-to-chemical production

The rise of inorganic-biological hybrid organisms for solar-to-chemical production has spurred mechanistic investigations into the dynamics of the biotic-abiotic interface to drive the development of next-generation systems. The model system, Moorella thermoacetica-cadmium sulfide (CdS), combines an inorganic semiconductor nanoparticle light harvester with an acetogenic bacterium to drive the photosynthetic reduction of CO₂ to acetic acid with high efficiency. In this work, we report insights into this unique electrotrophic behavior and propose a charge-transfer mechanism from CdS to M. thermoacetica Transient absorption (TA) spectroscopy revealed that photoexcited electron transfer rates increase with increasing hydrogenase (H₂ase) enzyme activity. On the same time scale as the TA spectroscopy, time-resolved infrared (TRIR) spectroscopy showed spectral changes in the 1,700-1,900-cm^-1 spectral region. The quantum efficiency of this system for photosynthetic acetic acid generation also increased with increasing H₂ase activity and shorter carrier lifetimes when averaged over the first 24 h of photosynthesis. However, within the initial 3 h of photosynthesis, the rate followed an opposite trend: The bacteria with the lowest H₂ase activity photosynthesized acetic acid the fastest. These results suggest a two-pathway mechanism: a high quantum efficiency charge-transfer pathway to H₂ase generating H₂ as a molecular intermediate that dominates at long time scales (24 h), and a direct energy-transducing enzymatic pathway responsible for acetic acid production at short time scales (3 h). This work represents a promising platform to utilize conventional spectroscopic methodology to extract insights from more complex biotic-abiotic hybrid systems.

Hybridization of photoanode and bioanode to enhance the current production of bioelectrochemical systems

Bacterial extracellular electron transfer is one of the main bottlenecks in determining the efficiency of bioelectrochemical systems. Here, we report a photobioanode that combines carbon material with a photocatalyst (α-Fe2O3), utilizing visible light to accelerate biofilm formation and extracellular electron transfer in bioelectrochemical systems. Cyclic voltammetric studies of this photobioanode revealed active electron transfer at the anode/biofilm interface. The charge-transfer resistance of the anode/biofilm was ca. 46.6 Ω, which is half that of the unmodified anode. In addition, the results of confocal laser scanning microscopy and bacterial community analysis indicate that the photobioanode and light can accelerate biofilm formation and enrich exoelectrogens. When equipped in photo-bioelectrochemical systems, the start-up time was shortened from about 2.5 days to 1.1 days. The maximum current density of photo-bioelectrochemical systems was almost twice that of a control bioelectrochemical system. In addition, the current density of the photo-bio-electrochemical cell (PBEC) showed almost no decrease after being subjected to 40 d of illumination. This photobioanode is therefore a cost-effective, energy-clean, environment-friendly anode with high electrocatalytic activity and long-term stability, which has broad prospects in various processes, including wastewater treatment, bioelectricity generation, bioelectricity synthesis, and hydrogen production.

Directed Assembly of Nanoparticle Catalysts on Nanowire Photoelectrodes for Photoelectrochemical CO2 Reduction

Reducing carbon dioxide with a multicomponent artificial photosynthetic system, closely mimicking nature, represents a promising approach for energy storage. Previous works have focused on exploiting light-harvesting semiconductor nanowires (NW) for photoelectrochemical water splitting. With the newly developed CO2 reduction nanoparticle (NP) catalysts, direct interfacing of these nanocatalysts with NW light absorbers for photoelectrochemical reduction of CO2 becomes feasible. Here, we demonstrate a directed assembly of NP catalysts on vertical NW substrates for CO2-to-CO conversion under illumination. Guided by the one-dimensional geometry, well-dispersed assembly of Au3Cu NPs on the surface of Si NW arrays was achieved with facile coverage tunability. Such Au3Cu NP decorated Si NW arrays can readily serve as effective CO2 reduction photoelectrodes, exhibiting high CO2-to-CO selectivity close to 80% at -0.20 V vs RHE with suppressed hydrogen evolution. A reduction of 120 mV overpotential compared to the planar (PL) counterpart was observed resulting from the optimized spatial arrangement of NP catalysts on the high surface area NW arrays. In addition, this system showed consistent photoelectrochemical CO2 reduction capability up to 18 h. This simple photoelectrode assembly process will lead to further progress in artificial photosynthesis, by allowing the combination of developments in each subfield to create an efficient light-driven system generating carbon-based fuels.

Cysteine-Cystine Photoregeneration for Oxygenic Photosynthesis of Acetic Acid from CO2 by a Tandem Inorganic-Biological Hybrid System

Tandem "Z-scheme" approaches to solar-to-chemical production afford the ability to independently develop and optimize reductive photocatalysts for CO2 reduction to multicarbon compounds and oxidative photocatalysts for O2 evolution. To connect the two redox processes, molecular redox shuttles, reminiscent of biological electron transfer, offer an additional level of facile chemical tunability that eliminates the need for solid-state semiconductor junction engineering. In this work, we report a tandem inorganic-biological hybrid system capable of oxygenic photosynthesis of acetic acid from CO2. The photoreductive catalyst consists of the bacterium Moorella thermoacetica self-photosensitized with CdS nanoparticles at the expense of the thiol amino acid cysteine (Cys) oxidation to the disulfide form cystine (CySS). To regenerate the CySS/Cys redox shuttle, the photooxidative catalyst, TiO2 loaded with cocatalyst Mn(II) phthalocyanine (MnPc), couples water oxidation to CySS reduction. The combined system M. thermoacetica-CdS + TiO2-MnPc demonstrates a potential biomimetic approach to complete oxygenic solar-to-chemical production.

Photon management for augmented photosynthesis

Microalgae and cyanobacteria are some of nature's finest examples of solar energy conversion systems, effortlessly transforming inorganic carbon into complex molecules through photosynthesis. The efficiency of energy-dense hydrocarbon production by photosynthetic organisms is determined in part by the light collected by the microorganisms. Therefore, optical engineering has the potential to increase the productivity of algae cultivation systems used for industrial-scale biofuel synthesis. Herein, we explore and report emerging and promising material science and engineering innovations for augmenting microalgal photosynthesis.

Photosynthetic microalgae could provide an ecologically sustainable route to produce solar biofuels and high-value chemicals. Here, the authors review various optical management strategies used to manipulate the incident light in order to increase the efficiency of microalgae biofuel production.

A Molecular Surface Functionalization Approach to Tuning Nanoparticle Electrocatalysts for Carbon Dioxide Reduction

Conversion of the greenhouse gas carbon dioxide (CO2) to value-added products is an important challenge for sustainable energy research, and nanomaterials offer a broad class of heterogeneous catalysts for such transformations. Here we report a molecular surface functionalization approach to tuning gold nanoparticle (Au NP) electrocatalysts for reduction of CO2 to CO. The N-heterocyclic (NHC) carbene-functionalized Au NP catalyst exhibits improved faradaic efficiency (FE = 83%) for reduction of CO2 to CO in water at neutral pH at an overpotential of 0.46 V with a 7.6-fold increase in current density compared to that of the parent Au NP (FE = 53%). Tafel plots of the NHC carbene-functionalized Au NP (72 mV/decade) vs parent Au NP (138 mV/decade) systems further show that the molecular ligand influences mechanistic pathways for CO2 reduction. The results establish molecular surface functionalization as a complementary approach to size, shape, composition, and defect control for nanoparticle catalyst design.

Water splitting-biosynthetic system with CO₂ reduction efficiencies exceeding photosynthesis

Artificial photosynthetic systems can store solar energy and chemically reduce CO2 We developed a hybrid water splitting-biosynthetic system based on a biocompatible Earth-abundant inorganic catalyst system to split water into molecular hydrogen and oxygen (H2 and O2) at low driving voltages. When grown in contact with these catalysts, Ralstonia eutropha consumed the produced H2 to synthesize biomass and fuels or chemical products from low CO2 concentration in the presence of O2 This scalable system has a CO2 reduction energy efficiency of ~50% when producing bacterial biomass and liquid fusel alcohols, scrubbing 180 grams of CO2 per kilowatt-hour of electricity. Coupling this hybrid device to existing photovoltaic systems would yield a CO2 reduction energy efficiency of ~10%, exceeding that of natural photosynthetic systems.

Bacterial viability on chemically modified silicon nanowire arrays

The global threat of antimicrobial resistance is driving an urgent need for novel antimicrobial strategies. Functional surfaces are essential to prevent spreading of infection and reduce surface contamination. In this study we have fabricated and characterized multiscale-functional nanotopographies with three levels of functionalization: (1) nanostructure topography in the form of silicon nanowires, (2) covalent chemical modification with (3-aminopropyl)triethoxysilane, and (3) incorporation of chlorhexidine digluconate. Cell viability assays were carried out on two model microorganisms E. coli and S. aureus over these nanotopographic surfaces. Using SEM we have identified two growth modes producing distinctive multicellular structures, i.e. in plane growth for E. coli and out of plane growth for S. aureus. We have also shown that these chemically modified SiNWs arrays are effective in reducing the number of planktonic and surface-attached microorganisms.

Wide Range pH-Tolerable Silicon@Pyrite Cobalt Dichalcogenide Microwire Array Photoelectrodes for Solar Hydrogen Evolution

This study employed silicon@cobalt dichalcogenide microwires (MWs) as wide range pH-tolerable photocathode material for solar water splitting. Silicon microwire arrays were fabricated through lithography and dry etching technologies. Si@Co(OH)2 MWs were utilized as precursors to synthesize Si@CoX2 (X = S or Se) photocathodes. Si@CoS2 and Si@CoSe2 MWs were subsequently prepared by thermal sulfidation and hydrothermal selenization reaction of Si@Co(OH)2, respectively. The CoX2 outer shell served as cocatalyst to accelerate the kinetics of photogenerated electrons from the underlying Si MWs and reduce the recombination. Moreover, the CoX2 layer completely deposited on the Si surface functioned as a passivation layer by decreasing the oxide formation on Si MWs during solar hydrogen evolution. Si@CoS2 photocathode showed a photocurrent density of -3.22 mA cm(-2) at 0 V (vs RHE) in 0.5 M sulfuric acid electrolyte, and Si@CoSe2 MWs revealed moderate photocurrent density of -2.55 mA cm(-2). However, Si@CoSe2 presented high charge transfer efficiency in neutral and alkaline electrolytes. Continuous chronoamperometry in acid, neutral, and alkaline solutions was conducted at 0 V (vs RHE) to evaluate the photoelectrochemical durability of Si@CoX2 MWs. Si@CoS2 electrode showed no photoresponse after the chronoamperometry test because it was etched through the electrolyte. By contrast, the photocurrent density of Si@CoSe2 MWs gradually increased to -5 mA cm(-2) after chronoamperometry characterization owing to the amorphous structure generation.

Solar photothermochemical alkane reverse combustion

A one-step, gas-phase photothermocatalytic process for the synthesis of hydrocarbons, including liquid alkanes, aromatics, and oxygenates, with carbon numbers (Cn) up to C13, from CO2 and water is demonstrated in a flow photoreactor operating at elevated temperatures (180-200 °C) and pressures (1-6 bar) using a 5% cobalt on TiO2 catalyst and under UV irradiation. A parametric study of temperature, pressure, and partial pressure ratio revealed that temperatures in excess of 160 °C are needed to obtain the higher Cn products in quantity and that the product distribution shifts toward higher Cn products with increasing pressure. In the best run so far, over 13% by mass of the products were C5+ hydrocarbons and some of these, i.e., octane, are drop-in replacements for existing liquid hydrocarbons fuels. Dioxygen was detected in yields ranging between 64% and 150%. In principle, this tandem photochemical-thermochemical process, fitted with a photocatalyst better matched to the solar spectrum, could provide a cheap and direct method to produce liquid hydrocarbons from CO2 and water via a solar process which uses concentrated sunlight for both photochemical excitation to generate high-energy intermediates and heat to drive important thermochemical carbon-chain-forming reactions.

Bringing High-Rate, CO2-Based Microbial Electrosynthesis Closer to Practical Implementation through Improved Electrode Design and Operating Conditions

The enhancement of microbial electrosynthesis (MES) of acetate from CO2 to performance levels that could potentially support practical implementations of the technology must go through the optimization of key design and operating conditions. We report that higher proton availability drastically increases the acetate production rate, with pH 5.2 found to be optimal, which will likely suppress methanogenic activity without inhibitor addition. Applied cathode potential as low as -1.1 V versus SHE still achieved 99% of electron recovery in the form of acetate at a current density of around -200 A m(-2). These current densities are leading to an exceptional acetate production rate of up to 1330 g m(-2) day(-1) at pH 6.7. Using highly open macroporous reticulated vitreous carbon electrodes with macropore sizes of about 0.6 mm in diameter was found to be optimal for achieving a good balance between total surface area available for biofilm formation and effective mass transfer between the bulk liquid and the electrode and biofilm surface. Furthermore, we also successfully demonstrated the use of a synthetic biogas mixture as carbon dioxide source, yielding similarly high MES performance as pure CO2. This would allow this process to be used effectively for both biogas quality improvement and conversion of the available CO2 to acetate.

Self-photosensitization of nonphotosynthetic bacteria for solar-to-chemical production

Improving natural photosynthesis can enable the sustainable production of chemicals. However, neither purely artificial nor purely biological approaches seem poised to realize the potential of solar-to-chemical synthesis. We developed a hybrid approach, whereby we combined the highly efficient light harvesting of inorganic semiconductors with the high specificity, low cost, and self-replication and -repair of biocatalysts. We induced the self-photosensitization of a nonphotosynthetic bacterium, Moorella thermoacetica, with cadmium sulfide nanoparticles, enabling the photosynthesis of acetic acid from carbon dioxide. Biologically precipitated cadmium sulfide nanoparticles served as the light harvester to sustain cellular metabolism. This self-augmented biological system selectively produced acetic acid continuously over several days of light-dark cycles at relatively high quantum yields, demonstrating a self-replicating route toward solar-to-chemical carbon dioxide reduction.

Morphology–activity correlation in hydrogen evolution catalyzed by cobalt sulfides

CoS electrocatalysts with various morphologies such as hollow nanoprism, broken nanoprism, and 3D nanoparticle could be obtained by a facile and rapid two-step microwave-assisted synthetic route. The correlation between catalyst morphology and electrocatalytic H₂evolution performance was systematically studied.

A Z-scheme photocatalyst constructed with an yttrium–tantalum oxynitride and a binuclear Ru(ii) complex for visible-light CO2 reduction

A hybrid photocatalyst composed of an yttrium–tantalum oxynitride (with a 2.1 eV band gap) and a binuclear Ru(ii) complex containing both photosensitizing and catalytic units was capable of reducing CO₂ to HCOOH with very high selectivity (>99%) under visible light (>400 nm) irradiation.

Metal-organic frameworks for electrocatalytic reduction of carbon dioxide

A key challenge in the field of electrochemical carbon dioxide reduction is the design of catalytic materials featuring high product selectivity, stability, and a composition of earth-abundant elements. In this work, we introduce thin films of nanosized metal-organic frameworks (MOFs) as atomically defined and nanoscopic materials that function as catalysts for the efficient and selective reduction of carbon dioxide to carbon monoxide in aqueous electrolytes. Detailed examination of a cobalt-porphyrin MOF, Al2(OH)2TCPP-Co (TCPP-H2 = 4,4',4″,4‴-(porphyrin-5,10,15,20-tetrayl)tetrabenzoate) revealed a selectivity for CO production in excess of 76% and stability over 7 h with a per-site turnover number (TON) of 1400. In situ spectroelectrochemical measurements provided insights into the cobalt oxidation state during the course of reaction and showed that the majority of catalytic centers in this MOF are redox-accessible where Co(II) is reduced to Co(I) during catalysis.

Hybrid bioinorganic approach to solar-to-chemical conversion

Natural photosynthesis harnesses solar energy to convert CO2 and water to value-added chemical products for sustaining life. We present a hybrid bioinorganic approach to solar-to-chemical conversion in which sustainable electrical and/or solar input drives production of hydrogen from water splitting using biocompatible inorganic catalysts. The hydrogen is then used by living cells as a source of reducing equivalents for conversion of CO2 to the value-added chemical product methane. Using platinum or an earth-abundant substitute, α-NiS, as biocompatible hydrogen evolution reaction (HER) electrocatalysts and Methanosarcina barkeri as a biocatalyst for CO2 fixation, we demonstrate robust and efficient electrochemical CO2 to CH4 conversion at up to 86% overall Faradaic efficiency for ≥ 7 d. Introduction of indium phosphide photocathodes and titanium dioxide photoanodes affords a fully solar-driven system for methane generation from water and CO2, establishing that compatible inorganic and biological components can synergistically couple light-harvesting and catalytic functions for solar-to-chemical conversion.

State of the art of nanoforest structures and their applications

Forest-like nanostructures, their syntheses, properties, and applications are reviewed.