Attogram sensing of trinitrotoluene with a self-assembled molecular gelator

Sunlight induced unique morphological transformation in graphene based nanohybrids: appearance of a new tetra-nanohybrid and tuning of functional property of these nanohybrids

In this study, sunlight was used for in situ preparation of gel-based various nanohybrid systems. A naturally occurring amino acid, l-phenylalanine derivative formed a hydrogel with graphene oxide (GO)/reduced graphene oxide (rGO) at physiological pH. This hydrogel was then used in the presence of silver ions and diffuse sunlight to form initially a tri-nanohybrid system consisting of six atom silver nanoclusters, nanosheets, and nanofibers. Interestingly, a time-dependent morphological transformation occurs in this nanohybrid system to form one tri-nanohybrid to another tri-nanohybrid with the appearance of a novel, nanoscopic intermediate tetra-nanohybrid system consisting of four distinctly different nanomaterials (nanofibers, nanosheets, nanospheres, and nanoparticles). UV-Vis and fluorescence spectroscopic analyses, transmission electron microscopic, X-ray photo electron spectroscopic and MALDI-TOF mass spectral analyses with time were applied to characterise these morphological transformations in gel based nanohybrids. Time-dependent X-ray photo electron spectroscopic (XPS) analysis was used to uncover the mechanism for the transformation of silver nanoclusters to silver nanoparticles in the hydrogel matrix. Sunlight was used to trigger time-dependent structural transformation in the nanohybrid systems. Interestingly, one of these tri-nanohybrid systems (silver nanoparticles containing rGO based hydrogel) shows a catalytic property of reducing nitroarenes to aminoarenes and the catalytic efficiency can be modulated by changing the size of the silver nanoparticles with time in diffuse sunlight. The mechanism for different catalytic activities for different hybrids with varying size of silver nanoparticles has also been deciphered.

Unusually high fluorescence quantum yield of a homopolyfluorenylazomethine--towards a universal fluorophore

The absolute fluorescence quantum yield (Φfl) of a polyfluorenyl azomethine homopolymer was measured as a function of solvent polarity. The solvent induced and temperature dependent fluorescence of the homopolymer were also investigated and they were compared to the corresponding monomer and copolymer. The Φfl of the homopolymer was consistent (45-70%), regardless of solvent polarity with Stokes shifts up to 7460 cm(-1) in ethanol. In contrast, the Φfl of its corresponding monomer decreased from 60% in ethanol to 1% in toluene, whereas a Φfl < 5% for its analogous copolymer was measured. Moderate fluorescence yields (Φfl ≈ 25%) were also possible in thin film when co-depositing the homopolymer with PMMA. Cryofluorescence was used to probe the excited state deactivation modes. Deactivation by internal conversion was found to compete with fluorescence. The fluorescence deactivation pathways of the homopolymer and its corresponding monomer could be suppressed at 77 K, resulting in fluorescence turn-on. Both fluorophores were found to detect nitroaromatics.

Ultratrace Detection of Nitroaromatics: Picric Acid Responsive Aggregation/Disaggregation of Self-Assembled p-Terphenylbenzimidazolium-Based Molecular Baskets

1-(p-Terphenyl)-benzimidazolium (TRIPOD-TP) molecules undergo self-assembly to form rodlike structures in aqueous medium, as shown by field-emission scanning electron microscopy, transmission electron microscopy, and dynamic light scattering studies. Upon gradual addition of picric acid (PA), these aggregates undergo an aggregation/disaggregation process to complex morphological structures (10(-12)-10(-10) M PA) and spherical aggregates (10(-9)-10(-8) M PA). These spherical aggregates undergo further dissolution to well-dispersed spheres between 10(-7)-10(-6) M PA. During fluorescence studies, these aggregates demonstrate superamplified fluorescence quenching (>97%) in the presence of 10(-5) to 0.2 equiv of the probe concentration, an unprecedented process with PA. The lowest detection limits by solution of TRIPOD-TP are 5 × 10(-13) PA, 50 × 10(-12) M 2,4-dinitrophenol, 200 × 10(-12) M 2,4,6-trinitrotoluene, and 1 nM 1-chloro-2,4-dinitrobenzene. Paper strips dipped in the solution of TRIPOD-TP demonstrate quantitative fluorescence quenching between 10(-17) and 10(-6) M PA using front-surface steady state studies and can measure as low as 2.29 × 10(-20) g/cm(2) PA.

A fluorescent metal-organic framework for highly selective detection of nitro explosives in the aqueous phase

Selective and sensitive nitro explosive detection by a porous luminescent metal-organic framework has been reported. For the first time MOF based selective explosive detection in the presence of other nitro analytes in aqueous media is demonstrated.

A slippery molecular assembly allows water as a self-erasable security marker

Protection of currency and valuable documents from counterfeit continues to be a challenge. While there are many embedded security features available for document safety, they are not immune to forgery. Fluorescence is a sensitive property, which responds to external stimuli such as solvent polarity, temperature or mechanical stress, however practical use in security applications is hampered due to several reasons. Therefore, a simple and specific stimuli responsive security feature that is difficult to duplicate is of great demand. Herein we report the design of a fluorescent molecular assembly on which water behaves as a self-erasable security marker for checking the authenticity of documents at point of care. The underlying principle involves the disciplined self-assembly of a tailor-made fluorescent molecule, which initially form a weak blue fluorescence (λ_em = 425 nm, Φ_f = 0.13) and changes to cyan emission (λ_em = 488 nm,Φ_f = 0.18) in contact with water due to a reversible molecular slipping motion. This simple chemical tool, based on the principles of molecular self-assembly and fluorescence modulation, allows creation of security labels and optically masked barcodes for multiple documents authentication.

Methyl Cinnamate-Derived Fluorescent Rigid Organogels Based on Cooperative π-π Stacking and C═O···π Interactions Instead of H-Bonding and Alkyl Chains

A new class of rigid low-molecular-mass organic gelators (LMOGs) was synthesized by McMurry and Heck reactions, and their gels and photophysical properties were investigated. The LMOGs lacked alkyl chain and H-bonding units and produced good gelation ability in selected mixed organic solvents facilitated by cooperative π-π stacking and C═O···π interactions. Sensitive gel-sol transformation by molecular aggregation and disaggregation was easily achieved upon heating and cooling. H-H 2D NOESY and X-ray diffraction (XRD) patterns showed the π-π stacking and C═O···π interactions between tiny methyl acrylate groups as "tails". Importantly, this soft interaction model offers a useful tool for the future design and construction of supramolecular structures. At present, the LMOGs reported herein offer a sensitive gel-formation ability and aggregation-induced emission (AIE) property and thus have promising application potentials as functional soft matter in amorphous materials, photoelectric materials, and so on.

Self-assembled discrete molecules for sensing nitroaromatics

Efficient sensing of trace amount nitroaromatic (NAC) explosives has become a major research focus in recent time due to concerns over national security as well as their role as environment pollutants. NO2 -containing electron-deficient aromatic compounds, such as picric acid (PA), trinitrotoluene (TNT), and dinitrotoluene (DNT), are the common constituents of many commercially available chemical explosives. In this article, we have summarized our recent developments on the rational design of electron-rich self-assembled discrete molecular sensors and their efficacy in sensing nitroaromatics both in solution as well as in vapor phase. Several π-electron-rich fluorescent metallacycles (squares, rectangles, and tweezers/pincers) and metallacages (trigonal and tetragonal prisms) have been synthesized by means of metal-ligand coordination-bonding interactions, with enough internal space to accommodate electron-deficient nitroaromatics at the molecular level by multiple supramolecular interactions. Such interactions subsequently result in the detectable fluorescence quenching of sensors even in the presence of trace quantities of nitroaromatics. The fascinating sensing characteristics of molecular architectures discussed in this article may enable future development of improved sensors for nitroaromatic explosives.

Metallogels self-assembled from linear rod-like platinum complexes: influence of the linkage

Two linear rod-like platinum complexes, which only differed in the linkage, were prepared. They both self-assemble into metallogels in nonpolar solvents; however, a very big contrast was observed. Unexpectedly, a much weaker gel was acquired upon replacing the ester linkage by an amide group. The intermolecular hydrogen bonding offered by the amide motif leads to a different stacking fashion and mechanism. The results demonstrated herein contribute to the rational design of metallogels as well as other functional supramolecular materials.

Fluorescent porous film modified polymer optical fiber via "click" chemistry: stable dye dispersion and trace explosive detection

In this paper, we report a facile strategy to fabricate fluorescent porous thin film on the surface of U-bent poly(methyl methacrylate) optical fiber (U-bent POF) in situ via "click" polymerization for vapor phase sensing of explosives. Upon irradiation of evanescent UV light transmitting within the fiber under ambient condition, a porous film (POSS-thiol cross-linking film, PTCF) is synthesized on the side surface of the fiber by a thiol-ene "click" reaction of vinyl-functionalized polyhedral oligomeric silsesquioxanes (POSS-V8) and alkane dithiols. When vinyl-functionalized porphyrin, containing four allyl substituents at the periphery, is added into precursors for the polymerization, fluorescence porphyrin can be covalently bonded into the cross-linked network of PTCF. This "fastened" way reduces the aggregation-induced fluorescence self-quenching of porphyrin and enhances the physicochemical stability of the porous film on the surface of U-bent POF. Fluorescent signals of the PTCF/U-bent POF probe made by this method exhibit high fluorescence quenching toward trace TNT and DNT vapor and the highest fluorescence quenching efficiency is observed for 1, 6-hexanedimercaptan-based film. In addition, because of the presence of POSS-V8 with multi cross-linkable groups, PTCF exhibits well-organized pore network and stable dye dispersion, which not only causes fast and sensitive fluorescence quenching against vapors of nitroaromatic compounds, but also provides a repeatability of the probing performance.

Two luminescent Zn(ii) metal–organic frameworks for exceptionally selective detection of picric acid explosives

Two luminescent thiophene-containing Zn–MOFs exhibit very highly sensitive and selective detection of picric acid compared to other nitroaromatic explosives.

A small-molecule chemosensor for the selective detection of 2,4,6-trinitrophenol (TNP)

A pyridine-based receptor (L) was synthesised and characterized, which can serve as a small-molecule sensor for the specific recognition of TNP.

A two-component hydrogelator from citrazinic acid and melamine: synthesis, intriguing role of reaction parameters and iodine adsorption study

Melamine and citrazinic acid, upon solid-state grinding, produced a two-component gelator which selectively gelates water or a mixed-solvent system having water as one of the solvents. The dried hydrogel was porous and shows adsorption and storage of molecular iodine.

p-Aminobenzoic acid (pABA) sensitization of LaF3:Tb3+ nanoparticles and its applications in the detection of explosive materials

“A novel approach for detecting highly explosive aromatic nitro compounds utilizing pABA sensitised terbium (Tb³⁺) doped spherical LaF₃ nanoparticles.”

Ultrasensitive detection of nitroexplosive – picric acid via a conjugated polyelectrolyte in aqueous media and solid support

Cationic polymer PMI detects picric acid at ppt levels via combination of ground state charge transfer, RET and electrostatic interactions. A paper strip test and a contact mode sensing platform using chitosan film confirm the method as simple, portable and cost-effective.

Photocurrent generation of nanofibers constructed using a complex of a gelator and a fullerene derivative

Two-component xerogel film constructed by a carboxylic acid derivative and fullerene derivative could generate large photocurrent under light irradiation.

Luminescent Zn(ii)–terpyridine metal–organic gel for visual recognition of anions

Luminescent metal–organic gels (MOGs), which is comprised of zinc ion and Hcptpy, can widely differentiate anions in two steps, which is visible with the naked eye.

Visible detection of explosive nitroaromatics facilitated by a large stokes shift of luminescence using europium and terbium doped yttrium based MOFs

Two lanthanide doped highly luminescent MOFs have been synthesized and characterized. The MOFs are highly efficient for the detection of trace amount of explosive nitroaromatics by visible colour change.

Bile acid hydrazides: gelation, structural, physical and spectroscopic properties

Novel bile acid hydrazides are synthesized and temperature dependent NMR, IR and rheological experiments are done for understanding the role of intra-molecular hydrogen bonding leading to gelation.

Luminescent coordination polymer–fullerene composite as a highly sensitive and selective optical detector for 2,4,6-trinitrophenol (TNP)

A blue emitting coordination polymer–fullerene composite as a highly sensitive and selective luminescence quenching based optical detector for 2,4,6-trinitrophenol.

Correlation between hierarchical structure of crystal networks and macroscopic performance of mesoscopic soft materials and engineering principles

The performance of soft materials is correlated with the hierarchical crystal network structure by topology, correlation length, symmetry/ordering, and strength.

Towards deep-UV surface-enhanced resonance Raman spectroscopy of explosives: ultrasensitive, real-time and reproducible detection of TNT

We report ultrasensitive and label-free detection of 2,4,6-trinitrotoluene (TNT) deposited by drop coating using deep-ultraviolet surface-enhanced resonance Raman scattering (DUV-SERRS).

Triphenylamine-decorated BODIPY fluorescent probe for trace detection of picric acid

The near-IR photoactive material TBMA demonstrated high selectivity and sensitivity for picric acid detection with low detection limit and high quenching constant.

Ultrafast on-site selective visual detection of TNT at sub-ppt level using fluorescent gold cluster incorporated single nanofiber

Single nanofiber embedded fluorescent gold cluster based sensor for selective detection of TNT at sub-ppt level.

Three independent channel nanohybrids as fluorescent probes

Pyrene-capped CdSe/ZnS nanohybrids permit a simple and rapid quantification of trinitrotoluene in the presence of interferents of the same chemical family.

Emission enhanced two-component gels for the detection of organic amine vapors

A two-component gelator with enhanced emission could be used to quantitatively detect and discriminate between aliphatic and aromatic organic amine vapors.

Protonation and axial ligation intervened fluorescence turn-off sensing of picric acid in freebase and tin(iv) porphyrins

Protonation and axial ligation: selective sensing of picric acid using freebase and tin(iv) meso-tetraarylporphyrins occurs through protonation and axial ligation which is evident from UV-visible, fluorescence, ¹H NMR titrations and X-ray crystallography.

π-Conjugated diimidazolium salts: rigid structure to obtain organized materials

The photophysical properties and aggregation ability of π-conjugated diimidazolium salts were studied in solution and in the solid state. Experimental investigations were supported by DFT calculations.

A neutral branched platinum–acetylide complex possessing a tetraphenylethylene core: preparation of a luminescent organometallic gelator and its unexpected spectroscopic behaviour during sol-to-gel transition

A neutral branched platinum–acetylide complex TPA possessing a tetraphenylethylene core was successfully prepared, which was found to form luminescent organometallic gels in ethyl acetate.

Nanofibers of hydrogen-bonded two-component gel with closely connected p- and n-channels and photoinduced electron transfer

An D-A-D gelator (DTCQ) was designed and synthesized using 2,3-dimethyl-5,8-di(thiophen-2-yl)quinoxaline and N-alkyl 3-aminocarbazole units as acceptor and donor, respectively, which were linked by a single bond. The compound could gelate several solvents, such as benzyl alcohol, aniline, acetophenone, and o-dichlorobenzene, as well as self-assemble into one-dimensional (1D) nanofibers in gel phase. The absorption and infrared spectra of the gels indicated that π-π interactions between aromatic moieties, intermolecular hydrogen bonds between amide units, and van der Waals forces were the driving forces for the formation of 1D self-assemblies and gel. DTCQ gel was red and emits red fluorescence because it has a strong absorption band at 487 nm and an emissive band at 620 nm. Moreover, DTCQ and a fullerene carboxylic acid formed two-component gel, in which the two compounds developed a hydrogen bond complex and self-assembled into 1D nanofibers with closely connected p- and n-channels. The nanofibrous xerogel film can rapidly generate a photocurrent under visible-light radiation through electron transfer from the gelator to fullerene, and then, the excellent exciton separation and charge transfer to two electrodes.

Functionality-oriented molecular gels: synthesis and properties of nitrobenzoxadiazole (NBD)-containing low-molecular mass gelators

Two nitrobenzoxadiazole (NBD)-containing cholesteryl (Chol) derivatives were prepared by introducing d/l-phenylalanine into the linkers between the NBD and Chol units. The compounds were denoted as and , respectively. The gelation behaviors of them were tested in 34 liquids. It was found that the chirality of the linkers shows a great effect on the gelation ability and the gel properties of the two compounds. SEM studies demonstrated that the gelator in the gel of /DMSO aggregated into uniform fibrous structures. FTIR, (1)H NMR and UV-Vis spectroscopy measurements revealed that intermolecular hydrogen bonding and π-π stacking are two main driving forces to promote the gel formation. Interestingly, the /DMSO gel exhibits rapid and reproducible gel-sol phase transition and fluorescence quenching upon introduction of ammonia. Furthermore, both the gel and the fluorescence emission could be fully recovered upon evaporation of the ammonia gas introduced. Spectroscopy and model system studies revealed the association of ammonia with the nitro group of the NBD unit of the compound, which is recognized as the main reason for the chemical responses of the gel system. On the basis of the discovery, an ammonia sensing film had been fabricated and made into a device. Furthermore, a device-based and conceptual "ammonia leaking" monitoring instrument was developed. A preliminary test demonstrated that the performance of the system is exceptionally good, a typical and persuasive example to show the important real-life applications of molecular gels.

Multifunctional Benzothiadiazole-Based Small Molecules Displaying Solvatochromism and Sensing Properties toward Nitroarenes, Anions, and Cations

Aryl or heteroaryl 5-substituted imidazo-benzothiadiazole derivatives were synthesized and shown to display remarkable solvatofluorochromism and selectively sense mercury(II) cations, acetate anions, and nitroaromatic derivatives, with discrimination between p-nitrophenol and picric acid. These novel sensors are of importance these days, as the detection of explosives is a high priority in issues of national security and environmental protection. To determine the ion binding properties of the sensors, their absorption and fluorescence emission spectra upon binding different cations and anions were compared. Significant shifts in the spectra were only observed for mercury(II) and acetate. The binding of these two ions was further studied using (1)H NMR. The binding properties of different nitroaromatic compounds were also determined, and the results showed the importance of the presence of a phenol group in the guest molecule. Specifically, the two sensors were shown to discriminate between p-nitrophenol and picric acid. Finally, the mechanism of fluorescence quenching upon addition of nitrophenols was determined by computational methods.

CH3-π interaction of explosives with cavity of a TPE macrocycle: the key cause for highly selective detection of TNT

The identification of explosives is critical for analyzing the background of terrorism activities and the origin of pollution aroused by the explosives, but it is a challenge to discriminate the explosives with a very similar structure. Herein we report a series of TPE-based macrocycles with an AIE effect for the 0.2-4 ppb level detection of TNT among a number of nitro-aromatic compounds through fluorescence quenching in natural water sources, whereas the contact mode approach using portable paper sensors exhibited a high sensitivity for the detection of TNT at 1.0 × 10(-13) M level. The reliability of the quantitative analysis has been confirmed by HPLC. Our findings demonstrate that the TPE-based macrocycles have great potential as excellent sensors for TNT. Moreover, it was found for the first time that the macrocycles could selectively recognize nitroaromatics explosives bearing methyl group through a CH3-π interactions, and even exhibit a sole selectivity for TNT among the very difficultly differentiating nitroaromatics including trinitrophenol and trinitrobenzene.

Large red-shifted fluorescent emission via intermolecular π-π stacking in 4-ethynyl-1,8-naphthalimide-based supramolecular assemblies

Two low molecular weight gelators containing 4-ethynyl-1,8-naphthalimide groups with large conjugated structure via different length of alkyl chains were synthesized and fully characterized. The gelation properties, structural character, and fluorescence of the gels were investigated via methods of scanning electron microscopy, X-ray diffraction, and spectral studies. The gelators have high fluorescence quantum yields in both solution and solid state. Interestingly, the wavelength of the fluorescent emission in the reversible sol-gel transition process of the gels has a large red-shift of 80 nm in DMF, which is extremely sparse for 1,8-naphthalimide derivatives in the literature. The intermolecular π-π stacking between naphthalimide is suggested to be the main driving force for the gel formation and fluorescent variation by means of temperature-dependent (1)H NMR study and theoretical calculation.