Sustained delivery and expression of DNA encapsulated in polymeric nanoparticles

Functional polymer colloids with ordered interior

Polymer colloids with internal ordering were synthesized using hydrolytic condensation of octadecyl-dimethyl(3-trimethoxysilylpropyl)ammonium chloride (ODMACl) and a mixture of ODMACl and the trisodium salt of the triacetic acid N-(trimethoxysilylpropyl)ethylenediamine (TANED). The structure and morphology of these colloids were studied with small-angle X-ray scattering, transmission electron microscopy, nuclear magnetic resonance, sedimentation in ultracentrifuge; and other methods. When polymer colloids are obtained from a single precursor (ODMACl), their local structure, molecular weight characteristics, and morphology strongly depend on the reaction conditions, while lamellar ordering remains nearly unaffected. Use of a mixture of cationic and anionic silanes (ODMACl and TANED) as precursors in hydrolytic condensation results in novel zwitterionic copolymer colloids with two-dimensional hexagonal packing. Interaction of the ODMACl quaternary ammonium groups with the three carboxy groups of TANED leads to replacement of sodium and chloride ions and formation of gegenions, resulting in a molar ratio ODMACl:TANED = 3:1 (each TANED molecule contains three carboxy groups). Due to their ordered interior, polyODMACl (PODMACl) and PODMACl-TANED colloids can be used as templates for controlled positioning of nanoparticles within these colloids. For example, lamellar ordering controls Pt nanoparticle formation within PODMACl colloids providing Pt nanoparticle alignment within the lamellar structure. Loading of PODMACl-TANED colloids with iron salts followed by pH increase results in the formation of iron oxide nanoparticles located within PODMACl-TANED cylinders.

Fabrication and in vitro testing of polymeric delivery system for condensed DNA

Polyethylenimine (PEI) was combined with plasmid DNA and freeze dried following the addition of sucrose as a lyoprotectant and pore-forming agent. Freeze-dried PEI DNA condensates were dry mixed with granular polylactideglycolic acid (PLGA) then compression molded and sponged to encapsulated PEI DNA. A measurement of the elastic modulus indicated that 91 wt% sucrose substituted for 95 wt% sodium chloride as a porogen, resulting in PLGA sponges with a mechanical modulus of 100 kPa. The PEI DNA was retained (80%) within PLGA sponges prepared with sucrose during the leaching and subsequent 2-week release studies, whereas sodium chloride PLGA sponges caused the premature release (100%) of PEI DNA within 2 days. In vitro gene transfer studies with PEI DNA PLGA sponges established that adherent and infiltrating fibroblasts expressed reporter gene for 15 days compared with the short, 3-day expression mediated by direct gene of PEI DNA on cells in culture. The results demonstrate an approach to encapsulate condensed DNA in a PLGA sponge for the purpose of retaining DNA within the matrices and creating efficient gene transfer during tissue engineering.

Effect of side-chain structures on gene transfer efficiency of biodegradable cationic polyphosphoesters

Cationic polyphosphoesters (PPEs) with different side-chain charge groups were designed and synthesized as biodegradable gene carriers. Poly(N-methyl-2-aminoethyl propylene phosphate) (PPE-MEA), with a secondary amino group (-CH(2)CH(2)NHCH3) side chain released DNA in several hours at N/P (amino group of polymer to phosphate group of DNA) ratios from 0.5 to 5; whereas PPE-HA, bearing -CH(2)(CH2)(4)CH(2)NH(2) groups in the side chain, did not release DNA at the same ratio range for 30 days. Hydrolytic degradation and DNA binding results suggested that side chain cleavage, besides the polymer degradation, was the predominant factor affected the DNA release and transfection efficiencies. The side chain of PPE-MEA was cleaved faster than that of PPE-HA, resulting poor cellular uptake and no transgene expression for PPE-MEA/DNA complexes in COS-7 cells at charge ratios from 4 to 12. In contrast, PPE-HA/DNA complexes were stable enough to be internalized by cells and effected gene transfection (3400 folds higher than background at a charge ratio of 12). Interestingly, gene expression levels mediated by PPE-MEA and PPE-HA in mouse muscle following intramuscular injection of complexes showed a reversed order: PPE-MEA/DNA complexes mediated a 1.5-2-fold higher luciferase expression in mouse muscle as compared with naked DNA injection, while PPE-HA/DNA complexes induced delayed and lowered luciferase expression than naked DNA. These results suggested that the side chain structure is a crucial factor determining the mechanism and kinetics of hydrolytic degradation of PPE carriers, which in turn influenced the kinetics of DNA release from PPE/DNA complexes and their transfection abilities in vitro and in vivo.

Small-scale systems for in vivo drug delivery

Recent developments in the application of micro- and nanosystems for drug administration include a diverse range of new materials and methods. New approaches include the on-demand activation of molecular interactions, novel diffusion-controlled delivery devices, nanostructured 'smart' surfaces and materials, and prospects for coupling drug delivery to sensors and implants. Micro- and nanotechnologies are enabling the design of novel methods such as radio-frequency addressing of individual molecules or the suppression of immune response to a release device. Current challenges include the need to balance the small scale of the devices with the quantities of drugs that are clinically necessary, the requirement for more stable sensor platforms, and the development of methods to evaluate these new materials and devices for safety and efficacy.

Human serum albumin–polyethylenimine nanoparticles for gene delivery

Nanoparticles consisting of DNA, human serum albumin (HSA) and polyethylenimine (PEI) were formed and tested for transfection efficiency in vitro with the aim of generating a nonviral gene delivery vehicle. HSA-PEI-DNA nanoparticles containing the pGL3 vector coding for luciferase as reporter gene were formed by charge neutralization. The particles were characterized by gel retardation assay, dynamic light scattering (size) and electrophoretic mobility measurements (charge). Stability was determined by spectrophotometric analysis and transfection efficiency was evaluated in cell culture using human embryonic epithelial kidney 293 cells. HSA-PEI-DNA nanoparticles were prepared by co-encapsulation of PEI as a lysosomotropic agent at varying nitrogen to phosphate (N/P) ratios. An optimum transfection efficiency was achieved when the particles were prepared at N/P ratios between 4.8 and 8.4. Furthermore, they displayed a low cytotoxicity when tested in cell culture. Our results show that HSA-PEI-DNA nanoparticles are a versatile carrier for DNA that may be suitable for i.v. administration.

IONP-PLL: a novel non-viral vector for efficient gene delivery

BACKGROUND

Non-viral methods of gene delivery have been an attractive alternative to virus-based gene therapy. However, the vectors that are currently available have drawbacks limiting their therapeutic application.

METHODS

We have developed a self-assembled non-viral gene carrier, poly-L-lysine modified iron oxide nanoparticles (IONP-PLL), which is formed by modifying poly-L-lysine to the surface of iron oxide nanoparticles. The ability of IONP-PLL to bind DNA was determined by ratio-dependent retardation of DNA in the agarose gel and co-sedimentation assay. In vitro cytotoxic effects were quantified by MTT assay. The transfection efficiency in vitro was evaluated by delivering exogenous DNA to different cell lines using IONP-PLL. Intravenous injection of IONP-PLL/DNA complexes into mice was evaluated as a gene delivery system for gene therapy. The PGL2-control gene encoding firefly luciferase and the EGFP-C2 gene encoding green fluorescent protein were used as marker genes.

RESULTS

IONP-PLL could bind and protect DNA. In contrast to PLL and cationic liposomes, IONP-PLL described here was less cytotoxic in a broad range of concentrations. In the current study, we have demonstrated that IONP-PLL can deliver exogenous gene to cells in vitro and in vivo. After intravenous injection, IONP-PLL transferred reporter gene EGFP-C2 to lung, brain, spleen and kidney. Furthermore, we have demonstrated that IONP-PLL transferred exogenous DNA across the blood-brain barrier to the glial cells and neuron of brain.

CONCLUSIONS

IONP-PLL, a low-toxicity vector, appears to have potential for fundamental research and genetic therapy in vitro and in vivo, especially for gene therapy of CNS disease.

Poly (D, L-lactide-co-glycolide)/DNA microspheres to facilitate prolonged transgene expression in airway epithelium in vitro, ex vivo and in vivo

Repeat administration of gene therapy for cystic fibrosis is likely to be essential for long-term clinical efficacy. This may be minimized by the use of slow-release gene transfer preparations with more prolonged expression and longer dosing intervals for the patient. Poly(D-L-lactide-co-glycolide) (PLG) is a biodegradable and biocompatible polymer that has been used to encapsulate plasmid DNA. PLG-DNA microspheres were generated and characterized with respect to morphology, size (80% of particles <5.2 microm), and encapsulation efficiency (50.7+/-2.3%, n=6). Gel electrophoresis of DNA re-extracted from the microspheres confirmed that despite a decrease in the proportion of supercoiled conformation, it had not been degraded by the preparation process. Gene transfer efficiency was tested using microspheres encapsulating the reporter gene beta-galactosidase in vitro on Cos 7 cells and a CF airway epithelial line (CFTEo approximately ) and ex vivo in a sheep tracheal (s.t.) model. In both cases, transgene expression was significantly (P<0.01) lower at the first time point tested (24 h in vitro, 48 h ex vivo) compared to lipid-#67-mediated gene transfer. However, PLG-mediated expression in vitro was sustained at 48 h, while lipid #67-mediated expression levels had dropped significantly (P<0.05) to 50.3+/-13.7 and 38.2+/-2.7% (Cos 7 and CFTEo approximately cells, respectively) of the 24-h level. This pattern was also seen in the s.t. model where at 72 h, PLG-mediated expression was 125.4+/-7.2% of the 48-h level demonstrating significantly (P<0.05) better retention of transfection efficiency than lipid #67, where levels had fallen to approximately half the 48 h level. By 96 h, expression was still retained in the PLG-transfected group (87.3+/-12.5% of 48 h expression) but was undetectable in the lipid -#67-transfected s.t. Finally, PLG microspheres, encapsulating the reporter gene chloramphenicol transferase (CAT, 80 microg) were instilled intranasally into Balb/C mice. Compared to lipid-#67-mediated delivery, where whole lung CAT expression was highest at 48 h (13.7 x 10(3)+/-0.05 CAT U/microg protein, n=6) and then not detectable at further time points, CAT expression was not detectable in PLG-transfected mice at 48 h, but was detectable at 7, 14 and 21 days after transfection. These data demonstrate that PLG-mediated gene transfer can produce prolonged gene expression in airway epithelia. However, gene transfer efficiency still requires significant improvement.

Sustained release of plasmid DNA using lipid microtubules and agarose hydrogel

Non-viral gene therapy typically results in low transfection efficiencies and transient gene expression. To address these limitations, two sustained delivery systems capable of releasing functional, compacted DNA for over 50 days were designed. A luciferase plasmid was compacted with a polylysine-polyethylene glycol conjugate and released from agarose hydrogel and lipid microtubule-hydrogel delivery systems for over 50 days. The released DNA was characterized structurally using sedimentation, electron microscopy, and serum stability, and functionally using in vitro transfections. The released DNA retained its physical compaction and nuclease resistance and was converted from supercoiled to nicked and linear forms. Released compacted DNA produced significant gene expression in vitro, although at lower levels than freshly compacted DNA. Thus, hydrogels and lipid microtubules successfully provided the slow release of bioactive, compacted DNA.

Biodegradable nanoparticles for drug and gene delivery to cells and tissue

Biodegradable nanoparticles formulated from poly (D,L-lactide-co-glycolide) (PLGA) have been extensively investigated for sustained and targeted/localized delivery of different agents including plasmid DNA, proteins and peptides and low molecular weight compounds. Research about the mechanism of intracellular uptake of nanoparticles, their trafficking and sorting into different intracellular compartments, and the mechanism of enhanced therapeutic efficacy of nanoparticle-encapsulated agent at cellular level is more recent and is the primary focus of the review. Recent studies in our laboratory demonstrated rapid escape of PLGA nanoparticles from the endo-lysosomal compartment into cytosol following their uptake. Based on the above mechanism, various potential applications of nanoparticles for delivery of therapeutic agents to the cells and tissue are discussed.

Controllable delivery of non-viral DNA from porous scaffolds

The inductive approach to tissue engineering combines three-dimensional porous scaffolds with drug delivery to direct the action of progenitor cells into a functional tissue. We present an approach to fabricate scaffolds capable of controlled, sustained delivery by the assembly and subsequent fusion of drug-loaded microspheres using a gas foaming/particulate leaching process. DNA-loaded microspheres were fabricated from the copolymers of lactide and glycolide (PLG) using a cryogenic double emulsion process. Microspheres were fabricated in four populations with mean diameters ranging from 12.3 microm to 92.5 microm. Scaffolds fabricated by fusion of these microspheres had an interconnected open pore structure, maintained DNA integrity, and exhibited sustained release for 21 days. Control over the release was obtained through manipulating the properties of the polymer, microspheres, and the foaming process. Decreasing the microsphere diameter or the molecular weight of the polymer used for microsphere fabrication led to increased rates of release from the porous scaffold. Additionally, increasing the pressure of CO(2) increased the DNA release rate. The ability to create porous polymer scaffolds capable of controlled release rates may provide a means to enhance and regulate gene transfer within a developing tissue, which will increase their utility in tissue engineering.

Modified microplex vector enhances transfection of cells in culture while maintaining tumour-selective gene delivery in-vivo

A non-commercial liposome (dimethyl dioctadecyl ammonium bromide:dioleoyl phosphatidylethanolamine) was compared with a commercial variety (Lipofectamine) for transfection of cultured rat adenocarcinoma cells and in an in-vivo kidney tumour model. Transfection of the cells in culture and in tumours in-vivo was variable with both types of liposomes. A high-dose microplex (lipoplex-microsphere) vector enhanced liposome-mediated transfection of cells in culture. When these high-dose microplexes were tested in-vivo, they were better than both microspherical and liposomal delivery modes in terms of transgene expression levels and the tumour-to-normal tissue ratio of gene delivery. Microplexes have been demonstrated to be capable of not only selective delivery of plasmids to solid tumours, but also of increasing transfection in cell culture, a finding that may be used in ex-vivo transfection studies. It is hypothesized that microspheres anchored the combination vector closer to the cultured cells, allowing attached liposomes to gain easier access into cells. In-vivo, microspheres permitted the microplexes to selectively deliver their genetic payload within the tumour tissue, from where the action of cationic liposomes on cellular membranes facilitated increased access of plasmids into the cytosol of target cells.

Novel PDGFbetaR antisense encapsulated in polymeric nanospheres for the treatment of restenosis

Nanospheres composed of the biocompatible and biodegradable polymer, poly-DL-lactide/glycolide and containing platelet-derived growth factor beta-receptor antisense (PDGFbetaR-AS) have been formulated and examined in vitro and in vivo in balloon-injured rat restenosis model. The nanospheres (approximately 300 nm) of homogenous size distribution exhibited high encapsulation efficiency (81%), and a sustained release of PDGFbetaR-AS (phosphorothioated). Cell internalization was visualized, and the inhibitory effect on SMC was observed. Partially phosphorothioated antisense sequences were found to be more specific than the fully phosphorothioated analogs. A significant antirestenotic effect of the naked AS sequence and the AS-NP (nanoparticles) was observed in the rat carotid in vivo model. The extent of mean neointimal formation 14 days after injection of AS-NP, measured as a percentage of luminal stenosis, was 32.21 +/- 4.75% in comparison to 54.89 +/- 8.84 and 53.84 +/- 5.58% in the blank-NP and SC-NP groups, respectively. It is concluded that PLGA nanospheres containing phosphorothioated oligodeoxynucleotide antisense could serve as an effective gene delivery systems for the treatment of restenosis.

New lipid nanocapsules exhibit sustained release properties for amiodarone

Amiodarone is widely used in heart diseases but also provokes severe adverse effects due to its accumulation in other tissues than the heart. In order to circumvent side effects colloidal drug carriers have been designed to deliver the drug specifically to the site of action. Many preparation methods have been described and most have been reported to involve a high initial drug loss when introduced in an aqueous environment. Lipid nanocapsules (LNC) were prepared by a new phase inversion procedure and characterized in terms of size, surface potential, encapsulation efficiency, and drug release pattern. The encapsulation rate was varying between 92 and 94%. LNC did not display a distinct initial burst effect while the drug release of amiodarone can be prolonged over a significant period. Acceptor phase interfaces such as liposomes or blank LNC were applied to the release medium to enable a drug release to larger extents. The release was triggered by the pH of the release medium showing a faster release for lower pH; t(50%) values vary from 25.6 h (pH 2) to 236.3 h (pH 7.4). Moreover, LNC were prepared of different sizes (24.7+/-2.0 to 102.5+/-0.9 nm) showing only slight influences on their drug release profiles. It was concluded that the LNC surface is able to retain amphiphilic drugs. Such properties could allow drug delivery to the site of action without high initial drug loss.

Size-dependency of nanoparticle-mediated gene transfection: studies with fractionated nanoparticles

Nanoparticles formulated from biodegradable polymers such as poly (lactic acid) and poly (D,L-lactide-co-glycolide) (PLGA) are being extensively investigated as non-viral gene delivery systems due to their sustained release characteristics and biocompatibility. PLGA nanoparticles for DNA delivery are mainly formulated using an emulsion-solvent evaporation technique. However, this formulation procedure results in the formation of particles with heterogeneous size distribution. The objective of the present study was to determine the relative transfectivity of the smaller- and the larger-sized fractions of nanoparticles in cell culture. PLGA nanoparticles containing a plasmid DNA encoding luciferase protein as a marker were formulated by a multiple emulsion-solvent evaporation method (mean particle diameter = 97 +/- 3 nm) and were fractionated using a membrane (pore size: 100 nm) filtration technique. The particles that passed through the membrane were designated as the smaller-sized nanoparticles (mean diameter = 70 +/- 2 nm) and the fraction that was retained on the membrane as the larger-sized nanoparticles (mean diameter = 202 +/- 9 nm). The smaller-sized nanoparticles showed a 27-fold higher transfection than the larger-sized nanoparticles in COS-7 cell line and a 4-fold higher transfection in HEK-293 cell line. The surface charge (zeta potential), cellular uptake, and the DNA release were almost similar for the two fractions of nanoparticles, suggesting that some other yet unknown factor(s) is responsible for the observed differences in the transfection levels. The results suggest that the particle size is an important factor, and that the smaller-sized fraction of the nanoparticle formulation predominantly contributes towards their transfection.

Enhanced gene expression in mouse muscle by sustained release of plasmid DNA using PPE-EA as a carrier

Delivery of plasmid DNA by nanoparticles improves the DNA bioavailability, for instance in intramuscular administration, by localizing the DNA in the muscle tissue. Extracellular sustained release of the DNA may lead to more prolonged transgene expression. The present study describes a novel controlled gene delivery system based on a water soluble and biodegradable polyphosphoester, poly(2-aminoethyl propylene phosphate) (PPE-EA). The polymer degraded in PBS at 37 degrees C through the cleavage of the backbone phosphate bonds, and it was synthesized with a relative high molecular weight to ensure a suitable hydrolytic stability as a gene carrier. The tissue response and cytotoxicity study demonstrated a better tissue compatibility of PPE-EA in mouse muscle compared with commonly used polyethylenimine and poly-L-lysine. PPE-EA condensed DNA efficiently and protected DNA from nuclease and serum degradation. Sustained release of plasmid was achieved from PPE-EA/DNA complexes as a result of PPE-EA degradation. The DNA release profiles appear to be predominantly controlled by carrier degradation and the release rate of plasmid could be adjusted by varying the charge ratio of PPE-EA to DNA. At an N/P (amino to phosphate groups) ratio of 1, a 46% burst was observed for the first day, followed by about 4% release per day (24 microg DNA/day/mg of complex) for 12 days. Higher charge ratios reduced both the DNA release rate and the burst effect. The released DNA retained its structural and functional integrity. Intramuscular injection of PPE-EA-p43-LacZ complexes at N/P ratios of 0.5 and 1 resulted in enhanced beta-galactosidase expression in anterior tibialis muscle in Balb/c mice, as compared with naked DNA injections. Similarly, PPE-EA/IFN(alpha)2b DNA complexes generated an increased systemic level of interferon-alpha2b in mouse serum following intramuscular injection, as compared with naked DNA injection.

Rapid endo-lysosomal escape of poly(DL-lactide-co-glycolide) nanoparticles: implications for drug and gene delivery

The endo-lysosomal escape of drug carriers is crucial to enhancing the efficacy of their macromolecular payload, especially the payloads that are susceptible to lysosomal degradation. Current vectors that enable the endo-lysosomal escape of macromolecules such as DNA are limited by their toxicity and by their ability to carry only limited classes of therapeutic agents. In this paper, we report the rapid (<10 min) endo-lysosomal escape of biodegradable nanoparticles (NPs) formulated from the copolymers of poly(DL-lactide-co-glycolide) (PLGA). The mechanism of rapid escape is by selective reversal of the surface charge of NPs (from anionic to cationic) in the acidic endo-lysosomal compartment, which causes the NPs to interact with the endo-lysosomal membrane and escape into the cytosol. PLGA NPs are able to deliver a variety of therapeutic agents, including macromolecules such as DNA and low molecular weight drugs such as dexamethasone, intracellularly at a slow rate, which results in a sustained therapeutic effect. PLGA has a number of advantages over other polymers used in drug and gene delivery including biodegradability, biocompatibility, and approval for human use granted by the U.S. Food and Drug Administration. Hence PLGA is well suited for sustained intracellular delivery of macromolecules.

Delivery of plasmid DNA to articular chondrocytes via novel collagen-glycosaminoglycan matrices

Our primary objective was to fabricate a porous gene-supplemented collagen-glycosaminoglycan (GSCG) matrix for sustained delivery (over a period of several weeks) of plasmid DNA to articular chondrocytes when implanted into cartilage lesions. The specific aims of this in vitro study were to determine the release kinetics profiles of plasmid DNA from the GSCG matrices, and to determine the ability of the released plasmid DNA to transfect adult canine articular chondrocytes. In particular, we evaluated the effects of two variables, cross-linking treatment and the pH at which the DNA was incorporated into the matrices, on the amount of the plasmid DNA that remained bound to the GSCG matrices after passive (nonenzymatic) leaching and on the expression of a reporter gene in articular chondrocytes grown in the GSCG matrices. Collagen-glycosaminoglycan matrices were synthesized without cross-linking, and by three cross-linking treatments: dehydrothermal (DHT) treatment, 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDC) treatment, and exposure to ultraviolet (UV) radiation. The plasmid DNA was incorporated into the collagen-glycosaminoglycan matrices in solutions at pH 2.5 or 7.5. Transmission electron microscopy studies revealed plasmid DNA bound to the walls of the porous GSCG matrices. In general, the GSCG matrices fabricated at pH 2.5 retained a larger fraction of the initial DNA load after 28 days of incubation in Tris-EDTA buffer. The passive, solvent-mediated release of the plasmid DNA from the GSCG matrices showed a biphasic pattern consisting of a faster, early release rate over the initial 8 hr of leaching followed by a slower, late release rate that was relatively constant over the subsequent 28 days of leaching. Electrophoretic analyses revealed that the plasmid DNA released from the GSCG matrices fabricated at pH 2.5 had been linearized and/or degraded; whereas the plasmid DNA leached from the GSCG matrices prepared with a DNA solution at pH 7.5 was primarily supercoiled and linear. Plasmid DNA released from all GSCG matrix formulations was able to generate luciferase reporter gene expression in monolayer-cultured chondrocytes transfected with the aid of a commercial lipid reagent, and in chondrocytes cultured in the GSCG matrices without the aid of a supplemental transfection reagent. Luciferase expression in chondrocyte-seeded GSCG constructs was evident throughout the culture period (28 days), with the EDC and UV cross-linked matrices prepared at pH 7.5 providing the highest transgene expression levels. We conclude that released plasmid DNA continually transfected canine articular chondrocytes seeded into GSCG matrices in vitro for a 4-week period as evidenced by luciferase reporter gene expression. Thus, GSCG matrices can be fabricated to provide sustained release of plasmid DNA carrying a potential therapeutic gene.

Moving smaller in drug discovery and delivery

Advances in new micro- and nanotechnologies are accelerating the identification and evaluation of drug candidates, and the development of new delivery technologies that are required to transform biological potential into medical reality. This article will highlight the emerging micro- and nanotechnology tools, techniques and devices that are being applied to advance the fields of drug discovery and drug delivery. Many of the promising applications of micro- and nanotechnology are likely to occur at the interfaces between microtechnology, nanotechnology and biochemistry.

Vehicles for oligonucleotide delivery to tumours

The vasculature of a tumour provides the most effective route by which neoplastic cells may be reached and eradicated by drugs. The fact that a tumour's vasculature is relatively more permeable than healthy host tissue should enable selective delivery of drugs to tumour tissue. Such delivery is relevant to carrier-mediated delivery of genetic medicine to tumours. This review discusses the potential of delivering therapeutic oligonucleotides (ONs) to tumours using cationic liposomes and cyclodextrins (CyDs), and the major hindrances posed by the tumour itself on such delivery. Cationic liposomes are generally 100-200 nm in diameter, whereas CyDs typically span 1.5 nm across. Cationic liposomes have been used for the introduction of nucleic acids into mammalian cells for more than a decade. CyD molecules are routinely used as agents that engender cholesterol efflux from lipid-laden cells, thus having an efficacious potential in the management of atherosclerosis. A recent trend is to employ these oligosaccharide molecules for delivering nucleic acids in cells both in-vitro and in-vivo. Comparisons are made with other ON delivery agents, such as porphyrin derivatives (< 1 nm), branched chain dendrimers (approximately 10 nm), polyethylenimine polymers (approximately 10 nm), nanoparticles (20-1,000 nm) and microspheres (> 1 microm), in the context of delivery to solid tumours. A discourse on how the chemical and physical properties of these carriers may affect the uptake of ONs into cells, particularly in-vivo, forms a major basis of this review.

Gene delivery with synthetic (non viral) carriers

Non-viral gene delivery involving the use of cationic polymer and cationic lipid based carriers still continues to enjoy a high profile due to the safety advantages offered by these systems when compared with viruses. However, there are still problems associated with the use of these agents, notably their comparatively low efficiency and the inability to target gene expression to the area of pathology. On intravenous administration gene expression is found predominantly in the first capillary bed encountered-the lung endothelium. The clinical use of non-viral gene delivery systems in cystic fibrosis or cancer has involved their direct application to the site of pathology due to the targeting difficulties experienced. For gene expression to occur genes must be transported to the interior of the cell nucleus and a number of biological barriers to effective gene delivery have been identified. These may be divided into extracellular such as the targeting barrier mentioned above and intracellular such as the need for endosomal escape after endocytosis and the inefficient trafficking of genes to the nucleus. Targeting ligands have been used with moderate success to overcome the targeting barrier while endosomal escape and nuclear targeting peptides are some of the strategies, which have been employed to overcome the problems of endosomal escape and nuclear trafficking. It is hoped that the next generation of carriers will incorporate mechanisms to overcome these barriers thus improving the efficacy of such materials.