201
|
Sim TS, Kwon K, Park JC, Lee JG, Jung HI. Multistage-multiorifice flow fractionation (MS-MOFF): continuous size-based separation of microspheres using multiple series of contraction/expansion microchannels. LAB ON A CHIP 2011; 11:93-9. [PMID: 20957273 DOI: 10.1039/c0lc00109k] [Citation(s) in RCA: 36] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/11/2023]
Abstract
Previously we introduced a novel hydrodynamic method using a multi-orifice microchannel for size-based particle separation, which is called a multi-orifice flow fractionation (MOFF). The MOFF has several advantages such as continuous, non-intrusive, and minimal power consumption. However, it has a limitation that the recovery yield is relatively low. Although the recovery may be increased by adjusting parameters such as the Reynolds number and central collecting region, poor purity inevitably followed. We newly designed and fabricated a microfluidic channel for multi-stage multi-orifice flow fractionation (MS-MOFF), which is made by combining three multi-orifice segments, and consists of 3 inlets, 3 filters, 3 multi-orifice segments and 5 outlets. The structure and dimensions of the MS-MOFF were determined by the hydrodynamic principles to have constant Reynolds numbers at each multi-orifice segment. Polystyrene microspheres of two different sizes (7 μm and 15 μm) were tested. With this device, we made an attempt to improve recovery and minimize loss of purity by collecting and re-separating non-selected particles of the first separation. The final recovery successfully increased from 73.2% to 88.7% while the final purity slightly decreased from 91.4% to 89.1% (for 15 μm). These values were never achievable with the single-stage MOFF (SS-MOFF) having only one multi-orifice segment in our previous work. The MS-MOFF channel will be useful for clinical applications, such as separation of circulating tumor cells (CTC) or rare cells from human blood samples.
Collapse
Affiliation(s)
- Tae Seok Sim
- Bio Lab, Emerging Tech. R&D Center, Samsung Advanced Institute of Technology, San 14, Nongseo-dong, Giheung-gun, Younin-si, Gyeonggi-do 446-712, Republic of Korea
| | | | | | | | | |
Collapse
|
202
|
Jo MC, Guldiken R. A label-free cell separation using surface acoustic waves. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2011; 2011:7691-7694. [PMID: 22256120 DOI: 10.1109/iembs.2011.6091895] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/31/2023]
Abstract
We present two-stage microfluidic platform for a continuous label-free cell separation using surface acoustic waves. In the proposed platform, cells are first lined up at the center of the channel by using standing surface acoustic waves without introducing any external sheath flow. After focused at the center of the channel, the cells are then entered to the actual cell separation stage where the larger cell are exposed to more lateral displacement in the channel towards the pressure node due to the acoustic force differences. Consequently, different size cells are separated into multiple collection outlets. The focusing and separation of the cells can be accomplished simultaneously in the present two-stage microfluidic device. The device doesn't require the use of the sheath flow for positioning or aligning of cells. In this study, we demonstrated the separation of two different size particle streams (3 μm and 10 μm) with this microfluidic platform without introducing any external sheath flow.
Collapse
Affiliation(s)
- Myeong Chan Jo
- Department of Mechanical Engineering, University of South Florida, Tampa, FL 33620, USA.
| | | |
Collapse
|
203
|
Xu C, Wang M, Yin X. Three-dimensional (3D) hydrodynamic focusing for continuous sampling and analysis of adherent cells. Analyst 2011; 136:3877-83. [DOI: 10.1039/c1an15019g] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
204
|
Abstract
Recent advances in the fabrication of microflow devices using micro-electromechanical systems (MEMS) technology are described. Passive and active liquid flow control and particle-handling methods in micrometer-scale channels are reviewed. These methods are useful in micro total analysis systems (μTAS) and laboratory-on-a-chip systems. Multiple flow control systems (i.e., arrayed microvalves) for advanced high-throughput microflow systems are introduced. Examples of microflow devices and systems for chemical and biochemical applications are also described.
Collapse
|
205
|
Yun H, Bang H, Min J, Chung C, Chang JK, Han DC. Simultaneous counting of two subsets of leukocytes using fluorescent silica nanoparticles in a sheathless microchip flow cytometer. LAB ON A CHIP 2010; 10:3243-54. [PMID: 20941407 DOI: 10.1039/c0lc00041h] [Citation(s) in RCA: 20] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/21/2023]
Abstract
A portable flow cytometer has been recognized as an important tool for many clinical applications such as HIV/AIDS screening in developing countries and regions with limited medical facilities and resources. Conventional flow cytometers typically require multiple detectors for simultaneous identification of multiple subsets of immune cell. To minimize the number of detectors toward portable flow cytometry or to analyze multi-parametric cellular information with minimum number of detectors in conventional flow cytometers, we propose a versatile multiplexed cell-counting method using functional silica nanoparticles (SiNPs). FITC-doped SiNPs, which are 100 times brighter than the FITC molecules itself, were used as new intensity-based fluorescent dye complexes to simultaneously measure two subsets of leukocytes using a single detector. CD45(+)CD4(+) cells tagged with these FITC-doped SiNPs were 50 times brighter than CD45(+)CD4(-) cells tagged only with FITC. To make the overall system compact, a disposable microchip flow cytometer that does not require sheath flow was developed. Combining these dye-doped SiNPs based detection schemes and the sheathless microchip flow cytometer scheme, we successfully identified and counted two subsets of leukocytes simultaneously (R(2) = 0.876). These approaches can be the building blocks for a truly portable and disposable flow cytometer for various clinical cytometry applications.
Collapse
Affiliation(s)
- Hoyoung Yun
- Institute of Advanced Machinery and Design, Seoul National University, San 56-1 Shinlim-dong, Kwanak-gu, Seoul 151-742, Republic of Korea
| | | | | | | | | | | |
Collapse
|
206
|
Didar TF, Tabrizian M. Adhesion based detection, sorting and enrichment of cells in microfluidic Lab-on-Chip devices. LAB ON A CHIP 2010; 10:3043-53. [PMID: 20877893 DOI: 10.1039/c0lc00130a] [Citation(s) in RCA: 111] [Impact Index Per Article: 7.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2023]
Abstract
The detection, isolation and sorting of cells are important tools in both clinical diagnostics and fundamental research. Advances in microfluidic cell sorting devices have enabled scientists to attain improved separation with comparative ease and considerable time savings. Despite the great potential of Lab-on-Chip cell sorting devices for targeting cells with desired specificity and selectivity, this field of research remains unexploited. The challenge resides in the detection techniques which has to be specific, fast, cost-effective, and implementable within the fabrication limitations of microchips. Adhesion-based microfluidic devices seem to be a reliable solution compared to the sophisticated detection techniques used in other microfluidic cell sorting systems. It provides the specificity in detection, label-free separation without requirement for a preprocessing step, and the possibility of targeting rare cell types. This review elaborates on recent advances in adhesion-based microfluidic devices for sorting, detection and enrichment of different cell lines, with a particular focus on selective adhesion of desired cells on surfaces modified with ligands specific to target cells. The effect of shear stress on cell adhesion in flow conditions is also discussed. Recently published applications of specific adhesive ligands and surface functionalization methods have been presented to further elucidate the advances in cell adhesive microfluidic devices.
Collapse
Affiliation(s)
- Tohid Fatanat Didar
- Biomedical Engineering Department, McGill University, Montreal, QC H3A 2B4, Canada
| | | |
Collapse
|
207
|
Sugino H, Arakawa T, Nara Y, Shirasaki Y, Ozaki K, Shoji S, Funatsu T. Integration in a multilayer microfluidic chip of 8 parallel cell sorters with flow control by sol-gel transition of thermoreversible gelation polymer. LAB ON A CHIP 2010; 10:2559-2565. [PMID: 20689871 DOI: 10.1039/c004192k] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/29/2023]
Abstract
Microfluidic systems have significant implications in the field of cell separation since they could provide platforms with inexpensive, disposable and sterile structures. Here, we present a novel strategy to integrate microfluidic sorters into a single chip for high throughput sorting. Our parallel sorter consists of a microfluidic chip with a three-dimensional channel network that utilizes flow switching by a heat-induced sol-gel transition of thermoreversible gelation polymer. The 8 parallel sheathed sample flows were realized by injecting sample and buffer solutions into only 2 inlets. The sheathed flows enabled disposal of unwanted sample waste without laser irradiation, and collection of wanted sample upon irradiation. As an application of the sorter, two kinds of fluorescent microspheres were separated with recovery ratio and purity of 70% or 90% at throughputs of about 100 or 20 particles per second, respectively. Next, Escherichia coli cells expressing green fluorescent protein were separated from those expressing DsRed with recovery ratio and purity of 90% at a throughput of about 20 cells per second.
Collapse
Affiliation(s)
- Hirokazu Sugino
- Laboratory of Bio-analytical Chemistry, Graduate School of Pharmaceutical Sciences, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-0033, Japan
| | | | | | | | | | | | | |
Collapse
|
208
|
Cheung KC, Di Berardino M, Schade-Kampmann G, Hebeisen M, Pierzchalski A, Bocsi J, Mittag A, Tárnok A. Microfluidic impedance-based flow cytometry. Cytometry A 2010; 77:648-66. [PMID: 20583276 DOI: 10.1002/cyto.a.20910] [Citation(s) in RCA: 165] [Impact Index Per Article: 11.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
Abstract
Microfabricated flow cytometers can detect, count, and analyze cells or particles using microfluidics and electronics to give impedance-based characterization. Such systems are being developed to provide simple, low-cost, label-free, and portable solutions for cell analysis. Recent work using microfabricated systems has demonstrated the capability to analyze micro-organisms, erythrocytes, leukocytes, and animal and human cell lines. Multifrequency impedance measurements can give multiparametric, high-content data that can be used to distinguish cell types. New combinations of microfluidic sample handling design and microscale flow phenomena have been used to focus and position cells within the channel for improved sensitivity. Robust designs will enable focusing at high flowrates while reducing requirements for control over multiple sample and sheath flows. Although microfluidic impedance-based flow cytometers have not yet or may never reach the extremely high throughput of conventional flow cytometers, the advantages of portability, simplicity, and ability to analyze single cells in small populations are, nevertheless, where chip-based cytometry can make a large impact.
Collapse
Affiliation(s)
- Karen C Cheung
- Department of Electrical and Computer Engineering, University of British Columbia, Vancouver, Canada.
| | | | | | | | | | | | | | | |
Collapse
|
209
|
Hartman RL, Naber JR, Zaborenko N, Buchwald SL, Jensen KF. Overcoming the Challenges of Solid Bridging and Constriction during Pd-Catalyzed C−N Bond Formation in Microreactors. Org Process Res Dev 2010. [DOI: 10.1021/op100154d] [Citation(s) in RCA: 196] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Ryan L. Hartman
- Department of Chemical Engineering, and Department of Chemistry, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts, U.S.A
| | - John R. Naber
- Department of Chemical Engineering, and Department of Chemistry, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts, U.S.A
| | - Nikolay Zaborenko
- Department of Chemical Engineering, and Department of Chemistry, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts, U.S.A
| | - Stephen L. Buchwald
- Department of Chemical Engineering, and Department of Chemistry, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts, U.S.A
| | - Klavs F. Jensen
- Department of Chemical Engineering, and Department of Chemistry, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts, U.S.A
| |
Collapse
|
210
|
Op de Beeck J, De Malsche W, Vangelooven J, Gardeniers H, Desmet G. Hydrodynamic chromatography of polystyrene microparticles in micropillar array columns. J Chromatogr A 2010; 1217:6077-84. [DOI: 10.1016/j.chroma.2010.07.031] [Citation(s) in RCA: 13] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/29/2010] [Revised: 07/01/2010] [Accepted: 07/14/2010] [Indexed: 10/19/2022]
|
211
|
Lee S, Park HJ, Yoon JS, Kang KH. Optoelectrofluidic field separation based on light-intensity gradients. BIOMICROFLUIDICS 2010; 4:034102. [PMID: 20697461 PMCID: PMC2917786 DOI: 10.1063/1.3463716] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/12/2010] [Accepted: 06/18/2010] [Indexed: 05/28/2023]
Abstract
Optoelectrofluidic field separation (OEFS) of particles under light -intensity gradient (LIG) is reported, where the LIG illumination on the photoconductive layer converts the short-ranged dielectrophoresis (DEP) force to the long-ranged one. The long-ranged DEP force can compete with the hydrodynamic force by alternating current electro-osmosis (ACEO) over the entire illumination area for realizing effective field separation of particles. In the OEFS system, the codirectional illumination and observation induce the levitation effect, compensating the attenuation of the DEP force under LIG illumination by slightly floating particles from the surface. Results of the field separation and concentration of diverse particle pairs (0.82-16 mum) are well demonstrated, and conditions determining the critical radius and effective particle manipulation are discussed. The OEFS with codirectional LIG strategy could be a promising particle manipulation method in many applications where a rapid manipulation of biological cells and particles over the entire working area are of interest.
Collapse
Affiliation(s)
- Sanghyun Lee
- Department of Mechanical Engineering, Pohang University of Science and Technology, San 31, Hyoja-dong, Pohang 790-784, South Korea
| | | | | | | |
Collapse
|
212
|
Lenshof A, Ahmad-Tajudin A, Järås K, Swärd-Nilsson AM, Aberg L, Marko-Varga G, Malm J, Lilja H, Laurell T. Acoustic whole blood plasmapheresis chip for prostate specific antigen microarray diagnostics. Anal Chem 2010; 81:6030-7. [PMID: 19594154 DOI: 10.1021/ac9013572] [Citation(s) in RCA: 125] [Impact Index Per Article: 8.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
The generation of high quality plasma from whole blood is of major interest for many biomedical analyses and clinical diagnostic methods. However, it has proven to be a major challenge to make use of microfluidic separation devices to process fluids with high cell content, such as whole blood. Here, we report on an acoustophoresis based separation chip that prepares diagnostic plasma from whole blood linked to a clinical application. This acoustic separator has the capacity to sequentially remove enriched blood cells in multiple steps to yield high quality plasma of low cellular content. The generated plasma fulfills the standard requirements (<6.0 x 10(9) erythrocytes/L) recommended by the Council of Europe. Further, we successfully linked the plasmapheresis microchip to our previously developed porous silicon sandwich antibody microarray chip for prostate specific antigen (PSA) detection. PSA was detected by good linearity (R(2) > 0.99) in the generated plasma via fluorescence readout without any signal amplification at clinically relevant levels (0.19-21.8 ng/mL).
Collapse
Affiliation(s)
- Andreas Lenshof
- Department of Electrical Measurements, Lund University, Box 118, 221 00 Lund, Sweden.
| | | | | | | | | | | | | | | | | |
Collapse
|
213
|
Jellema LJC, Markesteijn AP, Westerweel J, Verpoorte E. Tunable Hydrodynamic Chromatography of Microparticles Localized in Short Microchannels. Anal Chem 2010; 82:4027-35. [DOI: 10.1021/ac902872d] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Affiliation(s)
- Laurens-Jan C. Jellema
- Pharmaceutical Analysis, Department of Pharmacy, University of Groningen, A. Deusinglaan 1, P.O. Box 196, 9700 AD Groningen, The Netherlands, and Laboratory for Aero- and Hydrodynamics, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands
| | - Anton P. Markesteijn
- Pharmaceutical Analysis, Department of Pharmacy, University of Groningen, A. Deusinglaan 1, P.O. Box 196, 9700 AD Groningen, The Netherlands, and Laboratory for Aero- and Hydrodynamics, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands
| | - Jerry Westerweel
- Pharmaceutical Analysis, Department of Pharmacy, University of Groningen, A. Deusinglaan 1, P.O. Box 196, 9700 AD Groningen, The Netherlands, and Laboratory for Aero- and Hydrodynamics, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands
| | - Elisabeth Verpoorte
- Pharmaceutical Analysis, Department of Pharmacy, University of Groningen, A. Deusinglaan 1, P.O. Box 196, 9700 AD Groningen, The Netherlands, and Laboratory for Aero- and Hydrodynamics, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands
| |
Collapse
|
214
|
Gossett DR, Weaver WM, Mach AJ, Hur SC, Tse HTK, Lee W, Amini H, Di Carlo D. Label-free cell separation and sorting in microfluidic systems. Anal Bioanal Chem 2010; 397:3249-67. [PMID: 20419490 PMCID: PMC2911537 DOI: 10.1007/s00216-010-3721-9] [Citation(s) in RCA: 513] [Impact Index Per Article: 36.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/30/2010] [Revised: 04/02/2010] [Accepted: 04/03/2010] [Indexed: 01/09/2023]
Abstract
Cell separation and sorting are essential steps in cell biology research and in many diagnostic and therapeutic methods. Recently, there has been interest in methods which avoid the use of biochemical labels; numerous intrinsic biomarkers have been explored to identify cells including size, electrical polarizability, and hydrodynamic properties. This review highlights microfluidic techniques used for label-free discrimination and fractionation of cell populations. Microfluidic systems have been adopted to precisely handle single cells and interface with other tools for biochemical analysis. We analyzed many of these techniques, detailing their mode of separation, while concentrating on recent developments and evaluating their prospects for application. Furthermore, this was done from a perspective where inertial effects are considered important and general performance metrics were proposed which would ease comparison of reported technologies. Lastly, we assess the current state of these technologies and suggest directions which may make them more accessible. A wide range of microfluidic technologies have been developed to separate and sort cells by taking advantage of differences in their intrinsic biophysical properties ![]()
Collapse
Affiliation(s)
- Daniel R. Gossett
- Department of Bioengineering, University of California Los Angeles, 420 Westwood Plaza, 5121 Engineering V, Box 951600, Los Angeles, CA 90095-1600 USA
- California NanoSystems Institute, Los Angeles, CA 90095 USA
| | - Westbrook M. Weaver
- Department of Bioengineering, University of California Los Angeles, 420 Westwood Plaza, 5121 Engineering V, Box 951600, Los Angeles, CA 90095-1600 USA
- California NanoSystems Institute, Los Angeles, CA 90095 USA
| | - Albert J. Mach
- Department of Bioengineering, University of California Los Angeles, 420 Westwood Plaza, 5121 Engineering V, Box 951600, Los Angeles, CA 90095-1600 USA
- California NanoSystems Institute, Los Angeles, CA 90095 USA
| | - Soojung Claire Hur
- California NanoSystems Institute, Los Angeles, CA 90095 USA
- Mechanical and Aerospace Engineering Department, University of California Los Angeles, Los Angeles, CA 90095 USA
| | - Henry Tat Kwong Tse
- Department of Bioengineering, University of California Los Angeles, 420 Westwood Plaza, 5121 Engineering V, Box 951600, Los Angeles, CA 90095-1600 USA
- California NanoSystems Institute, Los Angeles, CA 90095 USA
| | - Wonhee Lee
- Department of Bioengineering, University of California Los Angeles, 420 Westwood Plaza, 5121 Engineering V, Box 951600, Los Angeles, CA 90095-1600 USA
- California NanoSystems Institute, Los Angeles, CA 90095 USA
| | - Hamed Amini
- Department of Bioengineering, University of California Los Angeles, 420 Westwood Plaza, 5121 Engineering V, Box 951600, Los Angeles, CA 90095-1600 USA
- California NanoSystems Institute, Los Angeles, CA 90095 USA
| | - Dino Di Carlo
- Department of Bioengineering, University of California Los Angeles, 420 Westwood Plaza, 5121 Engineering V, Box 951600, Los Angeles, CA 90095-1600 USA
- California NanoSystems Institute, Los Angeles, CA 90095 USA
| |
Collapse
|
215
|
Bhagat AAS, Bow H, Hou HW, Tan SJ, Han J, Lim CT. Microfluidics for cell separation. Med Biol Eng Comput 2010; 48:999-1014. [DOI: 10.1007/s11517-010-0611-4] [Citation(s) in RCA: 440] [Impact Index Per Article: 31.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/24/2009] [Accepted: 04/01/2010] [Indexed: 12/19/2022]
|
216
|
Sollier E, Cubizolles M, Fouillet Y, Achard JL. Fast and continuous plasma extraction from whole human blood based on expanding cell-free layer devices. Biomed Microdevices 2010; 12:485-97. [DOI: 10.1007/s10544-010-9405-6] [Citation(s) in RCA: 62] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
|
217
|
Lenshof A, Laurell T. Continuous separation of cells and particles in microfluidic systems. Chem Soc Rev 2010; 39:1203-17. [PMID: 20179832 DOI: 10.1039/b915999c] [Citation(s) in RCA: 271] [Impact Index Per Article: 19.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022]
Abstract
The progress in microfabrication and lab-on-a-chip technologies has been a major area of development for new approaches to bioanalytics and integrated concepts for cell biology. Fundamental advances in the development of elastomer based microfluidics have been driving factors for making microfluidic technology available to a larger scientific community in the past years. In line with this, microfluidic separation of cells and particles is currently developing rapidly where key areas of interest are found in designing lab-on-a-chip systems that offer controlled microenvironments for studies of fundamental cell biology. More recently industrial interests are seen in the development of micro chip based flow cytometry technology both for preclinical research and clinical diagnostics. This critical review outlines the most recent developments in microfluidic technology for cell and particle separation in continuous flow based systems. (130 references).
Collapse
Affiliation(s)
- Andreas Lenshof
- Dept. Measurement Technology and Industrial Electrical Engineering, Div. Nanobiotechnology, Lund University, 22100 Lund, Sweden.
| | | |
Collapse
|
218
|
Separation of model mixtures of epsilon-globin positive fetal nucleated red blood cells and anucleate erythrocytes using a microfluidic device. J Chromatogr A 2010; 1217:1862-6. [PMID: 20144459 DOI: 10.1016/j.chroma.2010.01.065] [Citation(s) in RCA: 37] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/02/2009] [Revised: 01/19/2010] [Accepted: 01/20/2010] [Indexed: 11/20/2022]
Abstract
Microfluidic devices are capable of separating microparticles and cells. We developed and tested the efficiency of silicon cross-flow microfilters for the separation of primitive fetal nucleated red blood cells (FNRBCs) and adult anucleate red blood cell (AARBCs) from model mixtures. Stepwise improvements over three generations of device design resulted in an increasing trend in the recovery of FNRBCs. We obtained a recovery of FNRBCs (74.0+/-6.3%, p<0.05, n=5) using the third generation device, with a depletion of 46.5+/-3.2% AARBCs from the cell mixture. The purity of FNRBCs in the enriched fraction was enhanced by a factor of 1.7-fold.
Collapse
|
219
|
Mark D, Haeberle S, Roth G, Von Stetten F, Zengerle R. Microfluidic Lab-on-a-Chip Platforms: Requirements, Characteristics and Applications. MICROFLUIDICS BASED MICROSYSTEMS 2010. [DOI: 10.1007/978-90-481-9029-4_17] [Citation(s) in RCA: 61] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
|
220
|
Mark D, Haeberle S, Roth G, von Stetten F, Zengerle R. Microfluidic lab-on-a-chip platforms: requirements, characteristics and applications. Chem Soc Rev 2010; 39:1153-82. [PMID: 20179830 DOI: 10.1039/b820557b] [Citation(s) in RCA: 765] [Impact Index Per Article: 54.6] [Reference Citation Analysis] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
Affiliation(s)
- Daniel Mark
- HSG-IMIT-Institut für Mikro- und Informationstechnik, Wilhelm-Schickard-Strasse 10, 78052 Villingen-Schwenningen, Germany
| | | | | | | | | |
Collapse
|
221
|
|
222
|
Park JS, Jung HI. Multiorifice Flow Fractionation: Continuous Size-Based Separation of Microspheres Using a Series of Contraction/Expansion Microchannels. Anal Chem 2009; 81:8280-8. [DOI: 10.1021/ac9005765] [Citation(s) in RCA: 111] [Impact Index Per Article: 7.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Jae-Sung Park
- School of Mechanical Engineering, Yonsei University, 262 Seongsan-no Seodaemun-gu, Seoul 120-749, Republic of Korea
| | - Hyo-Il Jung
- School of Mechanical Engineering, Yonsei University, 262 Seongsan-no Seodaemun-gu, Seoul 120-749, Republic of Korea
| |
Collapse
|
223
|
A microfluidic device for separation of amniotic fluid mesenchymal stem cells utilizing louver-array structures. Biomed Microdevices 2009; 11:1297-307. [DOI: 10.1007/s10544-009-9349-x] [Citation(s) in RCA: 20] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
224
|
|
225
|
Zhu J, Xuan X. Dielectrophoretic focusing of particles in a microchannel constriction using DC-biased AC flectric fields. Electrophoresis 2009; 30:2668-75. [DOI: 10.1002/elps.200900017] [Citation(s) in RCA: 101] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
|
226
|
Choi S, Park JK. Tuneable hydrophoretic separation using elastic deformation of poly(dimethylsiloxane). LAB ON A CHIP 2009; 9:1962-5. [PMID: 19532973 DOI: 10.1039/b820364d] [Citation(s) in RCA: 20] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/23/2023]
Abstract
This paper demonstrates a method for tuning elastomeric microchannels for hydrophoretic separation made in poly(dimethylsiloxane) (PDMS). Uniform compressive strain is imposed on the elastomeric microchannel between two acrylic substrates by fastening the bolts. The elastomeric microchannel can change its cross-section during compression, simultaneously tuning the criterion for hydrophoretic ordering. The change of the channel cross-section under compression is studied using a confocal microscope and finite element method (FEM). By pressing the channel for hydrophoretic separation, we achieved tuning of the separation criterion from 7 to 2.5 microm in particle diameter.
Collapse
Affiliation(s)
- Sungyoung Choi
- Department of Bio and Brain Engineering, College of Life Science and Bioengineering, KAIST, 335 Gwahangno, Yuseong-gu, Daejeon, 305-701, Republic of Korea
| | | |
Collapse
|
227
|
Jellema LC, Mey T, Koster S, Verpoorte E. Charge-based particle separation in microfluidic devices using combined hydrodynamic and electrokinetic effects. LAB ON A CHIP 2009; 9:1914-1925. [PMID: 19532967 DOI: 10.1039/b819054b] [Citation(s) in RCA: 22] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
A new microfluidic approach for charge-based particle separation using combined hydrodynamic and electrokinetic effects is presented. A recirculating flow pattern is employed, generated through application of bi-directional flow in a narrow glass microchannel incorporating diverging or converging segments at both ends. The bi-directional flow in turn is a result of opposing pressure-driven flow and electro-osmotic flow in the device. Trapping and preconcentration of charged particles is observed in the recirculating flow, under conditions where the average net velocity of the particles themselves approaches zero. This phenomenon is termed flow-induced electrokinetic trapping (FIET). Importantly, the electrophoretic mobility (zeta potential) of the particles determines the flow conditions required for trapping. In this paper, we exploit FIET for the first time to perform particle separations. Using a non-uniform channel, one type of particle can be trapped according to its zeta-potential, while particles with higher or lower zeta-potentials are flushed away with the pressure-driven or electro-osmotic components, respectively, of the flow. This was demonstrated using simple mixtures of two polystyrene bead types having approximately the same size (3 microm) but different zeta potentials (differences were in the order of 25 to 40 mV). To gain more insight into the separation mechanism, particle separations in straight, 3 cm-long microchannels with uniform cross-section were also studied under conditions of bi-directional flow without trapping. A thorough theoretical analysis confirmed that trapping occurs when electrokinetic and pressure-driven particle velocities are equal and opposite throughout the diverging segment. This makes it possible to predict the pressure and electric field conditions required to separate particles having defined zeta potentials.
Collapse
Affiliation(s)
- L C Jellema
- Pharmaceutical Analysis, Department of Pharmacy, University of Groningen, A. Deusinglaan 1, P.O. Box 196, 9700 AD, Groningen, The Netherlands
| | | | | | | |
Collapse
|
228
|
Kim C, Lee KS, Kim YE, Lee KJ, Lee SH, Kim TS, Kang JY. Rapid exchange of oil-phase in microencapsulation chip to enhance cell viability. LAB ON A CHIP 2009; 9:1294-7. [PMID: 19370252 DOI: 10.1039/b819044e] [Citation(s) in RCA: 32] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/11/2023]
Abstract
This paper describes a microfluidic device for the microencapsulation of cells in alginate beads to enhance cell viability. The alginate droplet including cells was gelified with calcified oleic acid, using two-phase microfluidics. The on-chip gelation had generated monodisperse spherical alginate beads, which could not be readily obtained via conventional external gelation in a calcium chloride bath. However, the prolonged exposure of encapsulated cells to the toxic oil phase caused serious damage to the cells. Therefore, we proposed the formulation of a rapid oil-exchange chip which transforms the toxic oleic acid to harmless mineral oil. The flushing out of oleic acid after the gelation of alginate beads effected a dramatic increase in the viability of P19 embryonic carcinoma cells, up to 90%. The experimental results demonstrated that the cell viability was proportional to the flow rate of squeezing mineral oil.
Collapse
Affiliation(s)
- Choong Kim
- Nano-Bio Research Center, Korea Institute of Science and Technology, 136-791, Seoul, Korea
| | | | | | | | | | | | | |
Collapse
|
229
|
Tarn MD, Hirota N, Iles A, Pamme N. On-chip diamagnetic repulsion in continuous flow. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS 2009; 10:014611. [PMID: 27877262 PMCID: PMC5109609 DOI: 10.1088/1468-6996/10/1/014611] [Citation(s) in RCA: 23] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/08/2008] [Revised: 05/22/2009] [Accepted: 01/13/2009] [Indexed: 05/20/2023]
Abstract
We explore the potential of a microfluidic continuous flow particle separation system based on the repulsion of diamagnetic materials from a high magnetic field. Diamagnetic polystyrene particles in paramagnetic manganese (II) chloride solution were pumped into a microfluidic chamber and their deflection behaviour in a high magnetic field applied by a superconducting magnet was investigated. Two particle sizes (5 and 10 μm) were examined in two concentrations of MnCl2 (6 and 10%). The larger particles were repelled to a greater extent than the smaller ones, and the effect was greatly enhanced when the particles were suspended in a higher concentration of MnCl2. These findings indicate that the system could be viable for the separation of materials of differing size and/or diamagnetic susceptibility, and as such could be suitable for the separation and sorting of small biological species for subsequent studies.
Collapse
Affiliation(s)
- Mark D Tarn
- Department of Chemistry, The University of Hull, Cottingham Road, Hull HU6 7RX, UK
| | - Noriyuki Hirota
- Nano Ceramics Center, National Institute for Materials Science, Tsukuba 305-0047, Japan
| | - Alexander Iles
- Department of Chemistry, The University of Hull, Cottingham Road, Hull HU6 7RX, UK
| | - Nicole Pamme
- Department of Chemistry, The University of Hull, Cottingham Road, Hull HU6 7RX, UK
| |
Collapse
|
230
|
Hwang H, Park JK. Rapid and selective concentration of microparticles in an optoelectrofluidic platform. LAB ON A CHIP 2009; 9:199-206. [PMID: 19107274 DOI: 10.1039/b811740c] [Citation(s) in RCA: 25] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2023]
Abstract
We demonstrate rapid manipulation and selective concentration of microparticles using AC electrokinetics such as dielectrophoresis (DEP) and AC electro-osmosis (ACEO) in an optoelectrofluidic platform based on a liquid crystal display (LCD). When 10 V bias at 10 kHz was applied to the optoelectrofluidic device, only the 1 microm-diameter polystyrene particles were concentrated into the projected LCD image patterns and closely packed, forming the crystalline structure by ACEO flow, while the 6 microm-diameter particles were repelled by negative DEP forces. We have characterized this frequency-dependency of the optoelectrofluidic particle behavior according to the particle diameter. On the basis of these results, we can rapidly concentrate the 1 microm-diameter particles and separate them from the 6 microm particles, by applying an AC signal of 10 kHz frequency. This novel technique can be applied to rapidly concentrate, separate and pattern micro-/nanoparticles in many biological and chemical applications.
Collapse
Affiliation(s)
- Hyundoo Hwang
- Department of Bio and Brain Engineering, KAIST, 335 Gwahangno, Yuseong-gu, Daejeon 305-701, Korea
| | | |
Collapse
|
231
|
Lateral-flow particle filtration and separation with multilayer microfluidic channels. ACTA ACUST UNITED AC 2009. [DOI: 10.1116/1.3258155] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
|
232
|
Kulrattanarak T, van der Sman RGM, Schroën CGPH, Boom RM. Classification and evaluation of microfluidic devices for continuous suspension fractionation. Adv Colloid Interface Sci 2008; 142:53-66. [PMID: 18572146 DOI: 10.1016/j.cis.2008.05.001] [Citation(s) in RCA: 57] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/05/2007] [Revised: 05/07/2008] [Accepted: 05/12/2008] [Indexed: 11/28/2022]
Abstract
Membrane processes are well-known for separating and fractionating suspensions in many industries, but suffer from particle accumulation on the membrane surface. Currently, there are new developments using microfluidic devices for cell/DNA sorting and fractionation. We anticipate these devices are also applicable to fractionation of polydisperse and concentrated suspensions (e.g. foods), and may potentially have fewer problems with particle accumulation compared to membranes. This review article presents an overview of relevant microfluidic devices. We focus on their performance with respect to concentrated suspensions, as one finds in food industry. We give quantitative estimates on their yield, selectivity, and the potential for large-scale application. From this evaluation follows that deterministic ratchets seem most promising.
Collapse
Affiliation(s)
- T Kulrattanarak
- Food and Bioprocess Engineering Group, Wageningen University, P.O. Box 8129, 6700 EV, Wageningen, The Netherlands.
| | | | | | | |
Collapse
|
233
|
Kim SM, Lee SH, Suh KY. Cell research with physically modified microfluidic channels: a review. LAB ON A CHIP 2008; 8:1015-23. [PMID: 18584072 DOI: 10.1039/b800835c] [Citation(s) in RCA: 76] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/18/2023]
Abstract
An overview of the use of physically modified microfluidic channels towards cell research is presented. The physical modification can be realized either by combining embedded physical micro/nanostructures or a topographically patterned substrate at the micro- or nanoscale inside a channel. After a brief description of the background and the importance of the physically modified microfluidic system, various fabrication methods are described based on the materials and geometries of physical structures and channels. Of many operational principles for microfluidics (electrical, magnetic, optical, mechanical, and so on), this review primarily focuses on mechanical operation principles aided by structural modification of the channels. The mechanical forces are classified into (i) hydrodynamic, (ii) gravitational, (iii) capillary, (iv) wetting, and (v) adhesion forces. Throughout this review, we will specify examples where necessary and provide trends and future directions in the field.
Collapse
Affiliation(s)
- Sun Min Kim
- Department of Mechanical Engineering, Inha University, 253 Young Hyun-dong, Nam-gu, Incheon 402-751, Republic of Korea
| | | | | |
Collapse
|
234
|
Qi LY, Yin XF, Zhang L, Wang M. Rapid and variable-volume sample loading in sieving electrophoresis microchips using negative pressure combined with electrokinetic force. LAB ON A CHIP 2008; 8:1137-1144. [PMID: 18584090 DOI: 10.1039/b800085a] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/26/2023]
Abstract
A rapid and variable-volume sample loading scheme for chip-based sieving electrophoresis was developed by negative pressure combined with electrokinetic force. This was achieved by using a low-cost microvacuum pump and a single potential supply at a constant voltage. Both 12% linear polyacrylamide (LPA) with a high viscosity of 15000 cP and 2% hydroxyethylcellulose (HEC) with a low viscosity of 102 cP were chosen as the sieving materials to study the behavior and the versatility of the proposed method. To reduce the hydrodynamic resistance in the sampling channel, sieving material was only filled in the separation channel between the buffer waste reservoir (BW) to the edge of the crossed intersection. By applying a subambient pressure to the headspace of sample waste reservoir (SW), sample and buffer solution were drawn immediately from sample reservoir (S) and buffer reservoir (B) across the intersection to SW. At the same time, the charged sample in the sample flow was driven across the interface between the sample flow and the sieving matrix into the sieving material filled separation channel by the applied electric field. The injected sample plug length is in proportion with the loading time. Once the vacuum in SW reservoir was released to activate electrophoretic separation, flows from S and B to SW were immediately terminated by the back flow induced by the difference of the liquid levels in the reservoirs to prevent sample leakage during the separation stage. The sample consumption was about 1.7 x 10(2) nL at a loading time of 1 s for each cycle. Only 0.024 s was required to transport bias-free analyte to the injection point. It is easy to freely choose the sample plug volume in this method by simply changing the loading time and to inject high quality sample plug with non-distorted shape into the separation channel. The system has been proved to possess an exciting potential for improving throughput, repeatability, sensitivity and separation performance of chip-based sieving electrophoresis.
Collapse
Affiliation(s)
- Li-Ya Qi
- Institute of Microanalytical Systems, Department of Chemistry, Zhejiang University, Hangzhou, China
| | | | | | | |
Collapse
|
235
|
Evander M, Lenshof A, Laurell T, Nilsson J. Acoustophoresis in wet-etched glass chips. Anal Chem 2008; 80:5178-85. [PMID: 18489126 DOI: 10.1021/ac800572n] [Citation(s) in RCA: 53] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Acoustophoresis in microfluidic structures has primarily been reported in silicon microfabricated devices. This paper demonstrates, for the first time, acoustophoresis performed in isotropically etched glass chips providing a performance that matches that of the corresponding silicon microdevices. The resonance mode characteristics of the glass chip were equal to those of the silicon chip at its fundamental resonance. At higher order resonance modes the glass chip displays resonances at lower frequencies than the silicon chip. The cross-sectional profiles of acoustically focused particle streams are also reported for the first time, displaying particles confined in a vertical band in the channel center for both glass and silicon chips. A particle extraction efficiency of 98% at flow rates up to 200 microL/min (2% particle concentration) is reported for the glass chip at the fundamental resonance. The glass and silicon chips displayed equal particle extraction performance when tested for increasing particle concentrations of 2-15%, at a flow velocity of 12.9 cm/s for the glass chip and 14.8 cm/s for the silicon chip.
Collapse
Affiliation(s)
- Mikael Evander
- The Department of Electrical Measurements, Lund University, P.O. Box 118, 211 00 Lund, Sweden.
| | | | | | | |
Collapse
|
236
|
Yamada M, Kobayashi J, Yamato M, Seki M, Okano T. Millisecond treatment of cells using microfluidic devices via two-step carrier-medium exchange. LAB ON A CHIP 2008; 8:772-778. [PMID: 18432348 DOI: 10.1039/b718281c] [Citation(s) in RCA: 31] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/26/2023]
Abstract
We present herein a simple but versatile microfluidic system for the treatment of cells with millisecond chemical stimulus, by rapidly exchanging the carrier-medium of cells twice in a microchannel. A technique we refer to as 'hydrodynamic filtration' has been employed for the exchange of medium, in which the virtual width of flow in the microchannel determines the size of filtered cells/particles. The treatment time of cells could be rigidly adjusted by controlling the inlet flow rates and by changing the volume of the stimulating area in the microchannel. In the experiment, two types of microdevices were designed and fabricated, and at first, the ability for carrier-medium exchange was confirmed. As an application of the presented system, we examined the influence of the treatment time of HeLa cells with Triton X-100, a non-ionic surfactant used to solubilize the cellular membrane, on cell viability, varying the average treatment time from 17 to 210 ms. Both quantitative and qualitative analyses were performed to estimate the damage on cell membrane, demonstrating that the cell viability dramatically decreased when the treatment time was longer than approximately 40 ms. The obtained results demonstrated the ability of the presented system to conduct the rapid stimulation of cells, which would be useful for the analysis of biochemical reactions at the cell surface.
Collapse
Affiliation(s)
- Masumi Yamada
- Institute of Advanced Biomedical Engineering and Science, Tokyo Women's Medical University, 8-1 Kawada-cho, Shinjuku-ku, Tokyo, 162-8666, Japan
| | | | | | | | | |
Collapse
|
237
|
Choi S, Song S, Choi C, Park JK. Sheathless focusing of microbeads and blood cells based on hydrophoresis. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2008; 4:634-41. [PMID: 18383190 DOI: 10.1002/smll.200700308] [Citation(s) in RCA: 54] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/08/2023]
Abstract
This paper presents a microfluidic device for sheathless focusing of microbeads and blood cells based on a hydrophoretic platform comprising a V-shaped obstacle array (VOA). The VOA generates lateral pressure gradients that induce helical recirculations. Following the focusing flow particles passing through the VOA are focused in the center of the channel. In the device, the focusing pattern can be modulated by varying the gap height of the VOA. To achieve complete focusing within 4.4% coefficient of variation, the relative size differences between the gap and the particle were 3 and 4 microm for 10 and 15 microm beads, respectively. Red blood cells were used to study the hydrophoretic focusing pattern of biconcave, disk-shaped particles.
Collapse
Affiliation(s)
- Sungyoung Choi
- Department of Bio and Brain Engineering Korea Advanced Institute of Science and Technology (KAIST) 335 Gwahangno, Yuseong-gu, Daejeon, Korea
| | | | | | | |
Collapse
|
238
|
Kawamata T, Yamada M, Yasuda M, Seki M. Continuous and precise particle separation by electroosmotic flow control in microfluidic devices. Electrophoresis 2008; 29:1423-30. [DOI: 10.1002/elps.200700658] [Citation(s) in RCA: 36] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
|
239
|
Choi S, Park JK. Sheathless Hydrophoretic Particle Focusing in a Microchannel with Exponentially Increasing Obstacle Arrays. Anal Chem 2008; 80:3035-9. [DOI: 10.1021/ac8001319] [Citation(s) in RCA: 51] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Sungyoung Choi
- Department of Bio and Brain Engineering, KAIST, 335 Gwahangno, Yuseong-gu, Daejeon 305-701, Republic of Korea
| | - Je-Kyun Park
- Department of Bio and Brain Engineering, KAIST, 335 Gwahangno, Yuseong-gu, Daejeon 305-701, Republic of Korea
| |
Collapse
|
240
|
Kim C, Lee K, Kim JH, Shin KS, Lee KJ, Kim TS, Kang JY. A serial dilution microfluidic device using a ladder network generating logarithmic or linear concentrations. LAB ON A CHIP 2008; 8:473-9. [PMID: 18305867 DOI: 10.1039/b714536e] [Citation(s) in RCA: 47] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/15/2023]
Abstract
In this paper, we propose a serial dilution microfluidic chip which is able to generate logarithmic or linear step-wise concentrations. These concentrations were generated via adjustments in the flow rate of two converging fluids at the channel junctions of the ladder network. The desired dilution ratios are almost independent of the flow rate or diffusion length of molecules, as the dilution device is influenced only by the ratio of volumetric flow rates. Given a set of necessary dilution ratios, whether linear or logarithmic, a serial dilution chip can be constructed via the modification of a microfluidic resistance network. The design principle was suggested and both the logarithmic and linear dilution chips were fabricated in order to verify their performance in accordance with the fluorescence intensity. The diluted concentrations of a fluorescein solution in the microfluidic device evidenced relatively high linearity, and the cytotoxicity test of MCF-7 breast cancer cells via the logarithmic dilution chip was generally consistent with the results generated with manual dilution.
Collapse
Affiliation(s)
- Choong Kim
- Nano-Bioresearch center, Korea Institute of Science and Technology, Songbuk Gu, 136-791, Seoul, Korea
| | | | | | | | | | | | | |
Collapse
|
241
|
Matsuda M, Yamada M, Seki M. Blood Cell Classification Utilizing Hydrodynamic Filtration. ACTA ACUST UNITED AC 2008. [DOI: 10.1541/ieejsmas.128.396] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Affiliation(s)
- Miyuki Matsuda
- Dept. Chem. Eng., Grad. Sch. of Eng., Osaka Prefecture University
| | - Masumi Yamada
- Inst. Biomed. Eng. & Sci, Tokyo Women's Medical University
| | - Minoru Seki
- Dept. Appl. Chem. & Biotechnol., Grad. Sch. of Eng., Chiba University
| |
Collapse
|
242
|
Kersaudy-Kerhoas M, Dhariwal R, Desmulliez MPY. Recent advances in microparticle continuous separation. IET Nanobiotechnol 2008; 2:1-13. [PMID: 18298195 DOI: 10.1049/iet-nbt:20070025] [Citation(s) in RCA: 86] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022] Open
Affiliation(s)
- M Kersaudy-Kerhoas
- Heriot-Watt University, MIcroSystems Engineering Centre, School of Engineering and Physical Sciences, Edinburgh, UK.
| | | | | |
Collapse
|
243
|
Sugiura S, Edahiro JI, Kikuchi K, Sumaru K, Kanamori T. Pressure-driven perfusion culture microchamber array for a parallel drug cytotoxicity assay. Biotechnol Bioeng 2008; 100:1156-65. [DOI: 10.1002/bit.21836] [Citation(s) in RCA: 69] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
|
244
|
Abstract
Biochemical sample mixtures are commonly separated in batch processes, such as filtration, centrifugation, chromatography or electrophoresis. In recent years, however, many research groups have demonstrated continuous flow separation methods in microfluidic devices. Such separation methods are characterised by continuous injection, real-time monitoring, as well as continuous collection, which makes them ideal for combination with upstream and downstream applications. Importantly, in continuous flow separation the sample components are deflected from the main direction of flow, either by means of a force field (electric, magnetic, acoustic, optical etc.), or by intelligent positioning of obstacles in combination with laminar flow profiles. Sample components susceptible to deflection can be spatially separated. A large variety of methods has been reported, some of these are miniaturised versions of larger scale methods, others are only possible in microfluidic regimes. Researchers now have a diverse toolbox to choose from and it is likely that continuous flow methods will play an important role in future point-of-care or in-the-field analysis devices.
Collapse
Affiliation(s)
- Nicole Pamme
- The University of Hull, Department of Chemistry, Cottingham Road, Hull, UK HU6 7RX.
| |
Collapse
|
245
|
Continuous inertial focusing, ordering, and separation of particles in microchannels. Proc Natl Acad Sci U S A 2007; 104:18892-7. [PMID: 18025477 DOI: 10.1073/pnas.0704958104] [Citation(s) in RCA: 896] [Impact Index Per Article: 52.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022] Open
Abstract
Under laminar flow conditions, when no external forces are applied, particles are generally thought to follow fluid streamlines. Contrary to this perspective, we observe that flowing particles migrate across streamlines in a continuous, predictable, and accurate manner in microchannels experiencing laminar flows. The migration is attributed to lift forces on particles that are observed when inertial aspects of the flow become significant. We identified symmetric and asymmetric channel geometries that provide additional inertial forces that bias particular equilibrium positions to create continuous streams of ordered particles precisely positioned in three spatial dimensions. We were able to order particles laterally, within the transverse plane of the channel, with >80-nm accuracy, and longitudinally, in regular chains along the direction of flow. A fourth dimension of rotational alignment was observed for discoidal red blood cells. Unexpectedly, ordering appears to be independent of particle buoyant direction, suggesting only minor centrifugal contributions. Theoretical analysis indicates the physical principles are operational over a range of channel and particle length scales. The ability to differentially order particles of different sizes, continuously, at high rates, and without external forces in microchannels is expected to have a broad range of applications in continuous bioparticle separation, high-throughput cytometry, and large-scale filtration systems.
Collapse
|
246
|
Choi S, Song S, Choi C, Park JK. Continuous blood cell separation by hydrophoretic filtration. LAB ON A CHIP 2007; 7:1532-8. [PMID: 17960282 DOI: 10.1039/b705203k] [Citation(s) in RCA: 83] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/10/2023]
Abstract
We propose a new hydrophoretic method for continuous blood cell separation using a microfluidic device composed of slanted obstacles and filtration obstacles. The slanted obstacles have a larger height and gap than the particles in order to focus them to a sidewall by hydrophoresis. In the successive structure, the height and gap of the filtration obstacles with a filtration pore are set between the diameters of small and large particles, which defines the critical separation diameter. Accordingly, the particles smaller than the criterion freely pass through the gap and keep their focused position. In contrast, the particles larger than the criterion collide against the filtration obstacle and move into the filtration pore. The microfluidic device was characterized with polystyrene beads with a minimum diameter difference of 7.3%. We completely separated polystyrene microbeads of 9 and 12 microm diameter with a separation resolution of approximately 6.2. This resolution is increased by 6.4-fold compared with our previous separation method based on hydrophoresis (S. Choi and J.-K. Park, Lab Chip, 2007, 7, 890, ref. 1). In the isolation of white blood cells (WBCs) from red blood cells (RBCs), the microfluidic device isolated WBCs with 210-fold enrichment within a short filtration time of approximately 0.3 s. These results show that the device can be useful for the binary separation of a wide range of biological particles by size. The hydrophoretic filtration as a sample preparation unit offers potential for a power-free cell sorter to be integrated into disposable lab-on-a-chip devices.
Collapse
Affiliation(s)
- Sungyoung Choi
- Department of Bio and Brain Engineering, Korea Advanced Institute of Science and Technology (KAIST), 335 Gwahangno, Yuseong-gu, Daejeon, 305-701, Republic of Korea
| | | | | | | |
Collapse
|
247
|
Yun JY, Mun SJ, Lee SS, Nam HG. Electric field isolator (EFI) for isolated and electrophoretic manipulation of charged biomolecules. LAB ON A CHIP 2007; 7:916-9. [PMID: 17594012 DOI: 10.1039/b618099j] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/16/2023]
Abstract
This paper describes a novel technology-an electric field isolator (EFI)-that can be used for achieving isolated and electrophoretic manipulation of charged biomolecules inside a selected microscopic location. The EFI is a ground ring-shaped electrode (RE) surrounding a centre electrode (CE), which is comprised of a functional unit. When the CE is powered, the ground RE can inhibit the electric field from spreading to the neighbouring functional units. Therefore, the electrophoretic movement of the charged molecules in an electric field, which is based on the principle similar to that of electrophoresis, can be isolated inside a selected location. The ground RE causing this phenomenon is referred to as the EFI. In this paper, we clearly show the functionality of the EFI with mathematical and experimental studies.
Collapse
Affiliation(s)
- Jae Young Yun
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Daejeon 305-701, South Korea.
| | | | | | | |
Collapse
|
248
|
Choi S, Park JK. Continuous hydrophoretic separation and sizing of microparticles using slanted obstacles in a microchannel. LAB ON A CHIP 2007; 7:890-7. [PMID: 17594009 DOI: 10.1039/b701227f] [Citation(s) in RCA: 94] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2023]
Abstract
We report a microfluidic separation and sizing method of microparticles with hydrophoresis--the movement of suspended particles under the influence of a microstructure-induced pressure field. By exploiting slanted obstacles in a microchannel, we can generate a lateral pressure gradient so that microparticles can be deflected and arranged along the lateral flows induced by the gradient. Using such movements of particles, we completely separated polystyrene microbeads with 9 and 12 microm diameters. Also, we discriminated polystyrene microbeads with diameter differences of approximately 7.3%. Additionally, we measured the diameter of 10.4 microm beads with high coefficient of variation and compared the result with a conventional laser diffraction method. The slanted obstacle as a microfluidic control element in a microchannel is analogous to the electric, magnetic, optical, or acoustic counterparts in that their function is to generate a field gradient. Since our method is based on intrinsic pressure fields, we could eliminate the need for external potential fields to induce the movement of particles. Therefore, our hydrophoretic method will offer a new opportunity for power-free and biocompatible particle control within integrated microfluidic devices.
Collapse
Affiliation(s)
- Sungyoung Choi
- Department of BioSystems, Korea Advanced Institute of Science and Technology (KAIST), 373-1 Guseong-dong, Yuseong-gu, Daejeon 305-701, Republic of Korea
| | | |
Collapse
|
249
|
Yamada M, Kano K, Tsuda Y, Kobayashi J, Yamato M, Seki M, Okano T. Microfluidic devices for size-dependent separation of liver cells. Biomed Microdevices 2007; 9:637-45. [PMID: 17530413 DOI: 10.1007/s10544-007-9055-5] [Citation(s) in RCA: 63] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
Abstract
Liver is composed of various kinds of cells, including hepatic parenchymal cells (hepatocytes) and nonparenchymal cells, and separation of these cells is essential for cellular therapies and pharmacological and metabolic studies. Here, we present microfluidic devices for purely hydrodynamic and size-dependent separation of liver cells, which utilize hydrodynamic filtration. By continuously introducing cell suspension into a microchannel with multiple side-branch channels, cells smaller than a specific size are removed from the mainstream, while large cells are focused onto a sidewall in the microchannel and then separated into two or three groups. Two types of PDMS-glass hybrid microdevices were fabricated, and rat liver cells were successfully separated. Also, cell size, morphology, viability and several cell functions were analyzed, and the separation performances of the microfluidic devices were compared to that of a conventional centrifugal technique. The results showed that the presented microfluidic devices are low-cost and suitable for clinical use, and capable of highly functional separation with relatively high-speed processing.
Collapse
Affiliation(s)
- Masumi Yamada
- Institute of Advanced Biomedical Engineering and Science, Tokyo Women's Medical University, 8-1 Kawada-cho, Shinjuku-ku, Tokyo, 162-8666, Japan
| | | | | | | | | | | | | |
Collapse
|
250
|
Yamada M, Seki M. Microfluidic particle sorter employing flow splitting and recombining. Anal Chem 2007; 78:1357-62. [PMID: 16478134 DOI: 10.1021/ac0520083] [Citation(s) in RCA: 147] [Impact Index Per Article: 8.6] [Reference Citation Analysis] [Abstract] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
This paper describes an improved microfluidic device that enables hydrodynamic particle concentration and size-dependent separation to be carried out in a continuous manner. In our previous study, a method for hydrodynamic filtration and sorting of particles was proposed using a microchannel having multiple branch points and side channels, and it was applied for continuous concentration and separation of polymer particles and cells. In the current study, the efficiency of particle sorting was dramatically improved by geometrically splitting fluid flow from a main stream and recombining. With these operations, particles with diameters larger than a specific value move toward one sidewall in the mainstream. This control of particle positions is followed by the perfect particle alignment onto the sidewall, which increases the selectivity and recovery rates without using a liquid that does not contain particles. In this study, a microchannel having one inlet and five outlets was designed and fabricated. By simply introducing particle suspension into the device, concentrations of 2.1-3.0-microm particles were increased 60-80-fold, and they were collected independently from each outlet. In addition, it was demonstrated that the measured flow rates distributed into each side channel corresponded well to the theoretical values when regarding the microchannel network as a resistive circuit.
Collapse
Affiliation(s)
- Masumi Yamada
- Department of Chemistry and Biotechnology, School of Engineering, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan
| | | |
Collapse
|