Designing surface-enhanced Raman scattering (SERS) platforms beyond hotspot engineering: emerging opportunities in analyte manipulations and hybrid materials

Combined negative dielectrophoresis with a flexible SERS platform as a novel strategy for rapid detection and identification of bacteria

Surface-enhanced Raman spectroscopy (SERS) is a vibrational method successfully applied in analytical chemistry, molecular biology and medical diagnostics. In this article, we demonstrate the combination of the negative dielectrophoretic (nDEP) phenomenon and a flexible surface-enhanced Raman platform for quick isolation (3 min), concentration and label-free identification of bacteria. The platform ensures a strong enhancement factor, high stability and reproducibility for the SERS response of analyzed samples. By introducing radial dielectrophoretic forces directed at the SERS platform, we can efficiently execute bacterial cell separation, concentration and deposition onto the SERS-active surface, which simultaneously works as a counter electrode and thus enables such hybrid DEP-SERS device vibration-based detection. Additionally, we show the ability of our DEP-SERS system to perform rapid, cultivation-free, direct detection of bacteria in urine and apple juice samples. The device provides new opportunities for the detection of pathogens.

Plasmonic foam platforms for air quality monitoring

Plasmonic reversible gas sensors are of paramount importance for the monitoring of indoor environments. Herein, we design and engineer a plasmonic foam, with a high surface area, confined inside a capillary glass tube for the live monitoring of carbon monoxide (CO) in closed environments using surface-enhanced resonance Raman scattering. The illumination of the sensor with light during the flow of air allows the live monitoring of the concentration of atmospheric CO through surface-enhanced resonance Raman scattering. The sensor was prepared with a detection range from 10 to 40 ppm, due to health needs. The results show a sensitive, selective, reversible and robust sensor applicable to the monitoring of CO levels but also to other gas species upon appropriate functionalization.

Route to Cost-Effective Fabrication of Wafer-Scale Nanostructure through Self-Priming Nanoimprint

Nanoimprint technology is powerful for fabricating nanostructures in a large area. However, expensive equipment, high cost, and complex process conditions hinder the application of nano-imprinting technology. Therefore, double-layer self-priming nanoimprint technology was proposed to fabricate ordered metal nanostructures uniformly on 4-inch soft and hard substrates without the aid of expensive instruments. Different nanostructure (gratings, nanoholes and nanoparticles) and different materials (metal and MoS2) were patterned, which shows wide application of double-layer self-priming nanoimprint technology. Moreover, by a double-layer system, the width and the height of metal can be adjusted through the photoresist thickness and developing condition, which provide a programmable way to fabricate different nanostructures using a single mold. The double-layer self-priming nanoimprint method can be applied in poor condition without equipment and be programmable in nanostructure parameters using a single mold, which reduces the cost of instruments and molds.

Recent Advances in Metal Organic Frameworks Based Surface Enhanced Raman Scattering Substrates: Synthesis and Applications

Metal-organic frameworks (MOFs) are supramolecular nanomaterials, in which metal ions or clusters are connected by organic ligands to form crystalline lattices with highly ordered periodic porous network structure. MOFs have been widely applied in various fields, such as catalyst, sample preparation, and sensing. In recent years, MOFs based surface enhanced Raman scattering (SERS) substrates have attracted much attention since MOFs can largely improve the performance of metallic SERS substrates toward target enrichment and signal enhancement. MOFs have been exploited in SERS analysis to tackle some challenges that bare metal substrates cannot achieve. Combination of MOFs and SERS improved the sensitivity of traditional SERS analysis and extended the application scope of SERS. With the increasing exploration of MOFs based SERS substrates, there is a great demand to review the advances in these researches. Herein, this review concentrated on summarizing the preparation and applications of MOFs based SERS substrates. Representative researches were discussed to better understand the property of MOFs based SERS substrates. The advantages of MOFs based SERS substrates were highlighted, as well as their limitations. In addition, the challenges, opportunities, and future trends in MOFs based SERS analysis were tentatively discussed.

Designing the Hotspots Distribution by Anisotropic Growth

Changing the morphology of noble metal nanoparticles and polarization dependence of nanoparticles with different morphologies is an important part of further research on surface plasma enhancement. Therefore, we used the method based on Matlab simulation to provide a simple and effective method for preparing the morphologies of Au nanoparticles with different morphologies, and prepared the structure of Au nanoparticles with good uniformity and different morphologies by oblique angle deposition (OAD) technology. The change of the surface morphology of nanoparticles from spherical to square to diamond can be effectively controlled by changing the deposition angle. The finite difference time domain (FDTD) method was used to simulate the electromagnetic fields of Au nanoparticles with different morphologies to explore the polarization dependence of nanoparticles with different shapes, which was in good agreement with Raman spectrum.

Controlling silver morphology on a cramped optical fiber facet via a PVP-assisted silver mirror reaction for SERS fiber probe fabrication

Controlling the morphology of silver nanoparticles on a cramped and curved optical fiber facet is urgently needed to obtain SERS optical fiber probes with high performance.

An overview on molecular imprinted polymers combined with surface-enhanced Raman spectroscopy chemical sensors toward analytical applications

Surface-enhanced Raman spectroscopy (SERS) is a powerful and high-speed detection technology. It provides information on molecular fingerprint recognition with ultrahigh sensitive detection. However, it shows poor anti-interference capacity against complex matrices. Molecularly imprinted polymers (MIPs) can achieve specific recognition of targets from complex matrices. Through introducing the MIP separation system, the MIP-SERS chemical sensor can effectively overcome the limitation of complex matrix interference, and further improve the stability of sensors for detection. Herein, the materials and structures of integrated MIP-SERS sensors are systematically reviewed, and its application as a sensor for chemical detection of hazardous substances in environmental and food samples has been addressed as well. To broaden the prospects of application, we have discussed the current challenges and future perspectives that would accelerate the development of versatile MIP-SERS chemical sensors.

Bacteria Detection: From Powerful SERS to Its Advanced Compatible Techniques

The rapid, highly sensitive, and accurate detection of bacteria is the focus of various fields, especially food safety and public health. Surface-enhanced Raman spectroscopy (SERS), with the advantages of being fast, sensitive, and nondestructive, can be used to directly obtain molecular fingerprint information, as well as for the on-line qualitative analysis of multicomponent samples. It has therefore become an effective technique for bacterial detection. Within this progress report, advances in the detection of bacteria using SERS and other compatible techniques are discussed in order to summarize its development in recent years. First, the enhancement principle and mechanism of SERS technology are briefly overviewed. The second part is devoted to a label-free strategy for the detection of bacterial cells and bacterial metabolites. In this section, important considerations that must be made to improve bacterial SERS signals are discussed. Then, the label-based SERS strategy involves the design strategy of SERS tags, the immunomagnetic separation of SERS tags, and the capture of bacteria from solution and dye-labeled SERS primers. In the third part, several novel SERS compatible technologies and applications in clinical and food safety are introduced. In the final part, the results achieved are summarized and future perspectives are proposed.

Synthesis of Metal Nanostructures Using Supercritical Carbon Dioxide: A Green and Upscalable Process

Metallic nanostructures have numerous applications as industrial catalysts and sensing platforms. Supercritical carbon dioxide (scCO₂ ) is a green medium for the scalable preparation of nanomaterials. Supercritical fluid reactive deposition (SFRD) and other allied techniques can be employed for the mass production of metal nanostructures for various applications. The present article reviews the recent reports on the scCO₂ -assisted preparation of zero-valent metal nanomaterials and their applications. A brief description of the science of pure supercritical fluids, especially CO₂ , and the basics of binary mixtures composed of scCO₂ and a low volatile substance, e.g., an organometallic precursor are presented. The benefits of using scCO₂ for preparing metal nanomaterials, especially as a green solvent, are also being highlighted. The experimental conditions that are useful for the tuning of particle properties are reviewed thoroughly. The range of modifications to the classical SFRD methods and the variety of metallic nanomaterials that can be synthesized are reviewed and presented. Finally, the broad ranges of applications that are reported for the metallic nanomaterials that are synthesized using scCO₂ are reviewed. A brief summary along with perspectives about future research directions is also presented.

Surface Enhanced Raman Scattering Revealed by Interfacial Charge-Transfer Transitions

Surface enhanced Raman scattering (SERS) is a fingerprint spectral technique whose performance is highly dependent on the physicochemical properties of the substrate materials. In addition to the traditional plasmonic metal substrates that feature prominent electromagnetic enhancements, boosted SERS activities have been reported recently for various categories of non-metal materials, including graphene, MXenes, transition-metal chalcogens/oxides, and conjugated organic molecules. Although the structural compositions of these semiconducting substrates vary, chemical enhancements induced by interfacial charge transfer are often the major contributors to the overall SERS behavior, which is distinct from that of the traditional SERS based on plasmonic metals. Regarding charge-transfer-induced SERS enhancements, this short review introduces the basic concepts underlying the SERS enhancements, the most recent semiconducting substrates that use novel manipulation strategies, and the extended applications of these versatile substrates.

Self-Concentrated Surface-Enhanced Raman Scattering-Active Droplet Sensor with Three-Dimensional Hot Spots for Highly Sensitive Molecular Detection in Complex Liquid Environments

In this work, a surface-enhanced Raman scattering (SERS)-active droplet with three-dimensional (3D) hot spots prepared from a superhydrophobic SERS substrate, which is inspired by the nut wizard strategy, was developed for ultrasensitive detection in complex liquid environments. The SERS substrate was composed of silver-capped parylene C-coated carbon nanoparticles (Ag-PC@CNPs). Such a SERS substrate was prepared by candle-soot deposition to provide a porous carbon nanoparticle layer followed by deposition of a parylene C film to protect the CNPs and then sputtering of silver nanoparticles. Similar to a nut wizard, a droplet rolling on the Ag-PC@CNP-coated substrate picked up the Ag-PC@CNPs. In this way, a self-concentrated and extremely sensitive SERS-active droplet sensor with 3D hot spots was formed. The sensor did not require precise laser focusing and showed relatively high repeatability and much higher sensitivity than those of a corresponding SERS substrate with two-dimensional hot spots. The sensor also achieved high sensitivity and specificity in complex liquid environments; in addition, bovine serum albumin with a concentration as low as 1 pM can be achieved. Consequently, an extremely simple, flexible, and highly sensitive SERS detection technique applicable to liquid biopsy analysis is anticipated.

The sensitive detection of methylene blue using silver nanodecahedra prepared through a photochemical route

In this work, we have carried out systematic studies on the critical role of polyvinyl pyrrolidone (PVP) and citrate in the well-known chemical reduction route to synthesize silver nanodecahedra (AgND). Silver nitrate (AgNO₃) was used as silver source, which can be directly converted to metallic silver after being reduced by sodium borohydride (NaBH₄) under blue light-emitting diode (LED) irradiation (λ _max = 465 nm), and polyvinyl pyrrolidone (PVP) as a capping agent to assist the growth of AgND. The obtained products were silver nanodecahedra of excellent uniformity and stability with high efficiency and yield. The results showed that PVP acted as a capping agent to stabilize the silver nanoparticles, prolonging the initiation time required for nanodecahedra nucleation, thus inducing anisotropic growth, allowing the size and morphology of the AgND to be controlled successfully. This improved understanding allows a consistent process for the synthesis of AgND with significantly enhanced reproducibility to be developed and the formation mechanism of these nanostructures to be elucidated. This is a simple, cost-effective and easily reproducible method for creating AgND. The typical absorption maxima in the UV-vis spectroscopy of Ag seeds was λ _max ∼400 nm and that of AgND was λ _max ∼480 nm. The size of the prepared AgND was in the range of 60-80 nm. SEM images confirmed the uniform and high density of AgND when the concentration of PVP was 0.5 mM. The XRD pattern showed that the final product of AgND was highly crystallized. In addition, the prepared AgND can be used to detect methylene blue (MB) in a sensitive manner with good reproducibility and stability using Surface-Enhanced Raman Scattering (SERS) phenomenon. Out of the obtained products, the AgND prepared with 50 min blue LED light irradiation (AgND-50) displayed the strongest SERS signal. Interestingly, MB in diluted solution can be detected with a concentration as low as 10^-7 M (the limit of detection, LOD) and the linear dependence between SERS intensity and the MB concentration occurred in the range from 10^-7 to 10^-6 M. The enhancement factor (EF) of the SERS effect was about 1.602 × 10⁶ with a MB concentration of 10^-7 M using 532 nm laser excitation.

Application of a 2D Molybdenum Telluride in SERS Detection of Biorelevant Molecules

Two-dimensional (2D) transition-metal dichalcogenides have become promising candidates for surface-enhanced Raman spectroscopy (SERS), but currently very few examples of detection of relevant molecules are available. Herein, we show the detection of the lipophilic disease marker β-sitosterol on few-layered MoTe₂ films. The chemical vapor deposition (CVD)-grown films are capable of nanomolar detection, exceeding the performance of alternative noble-metal surfaces. We confirm that the enhancement occurs through the chemical enhancement (CE) mechanism via formation of a surface-analyte complex, which leads to an enhancement factor of ≈10⁴, as confirmed by Fourier transform infrared (FTIR), UV-vis, and cyclic voltammetry (CV) analyses and density functional theory (DFT) calculations. Low values of signal deviation over a seven-layered MoTe₂ film confirms the homogeneity and reproducibility of the results in comparison to noble-metal substrate analogues. Furthermore, β-sitosterol detection within cell culture media, a minimal loss of signal over 50 days, and the opportunity for sensor regeneration suggest that MoTe₂ can become a promising new SERS platform for biosensing.

Metal Nanoparticles-Enhanced Biosensors: Synthesis, Design and Applications in Fluorescence Enhancement and Surface-enhanced Raman Scattering

Metal nanoparticles (NP) that exhibit localized surface plasmon resonance play an important role in metal-enhanced fluorescence (MEF) and surface-enhanced Raman scattering (SERS). Among the optical biosensors, MEF and SERS stand out to be the most sensitive techniques to detect a wide range of analytes from ions, biomolecules to macromolecules and microorganisms. Particularly, anisotropic metal NPs with strongly enhanced electric field at their sharp corners/edges under a wide range of excitation wavelengths are highly suitable for developing the ultrasensitive plasmon-enhanced biosensors. In this review, we first highlight the reliable methods for the synthesis of anisotropic gold NPs and silver NPs in high yield, as well as their alloys and composites with good control of size and shape. It is followed by the discussion of different sensing mechanisms and recent advances in the MEF and SERS biosensor designs. This includes the review of surface functionalization, bioconjugation and (directed/self) assembly methods as well as the selection/screening of specific biorecognition elements such as aptamers or antibodies for the highly selective bio-detection. The right combinations of metal nanoparticles, biorecognition element and assay design will lead to the successful development of MEF and SERS biosensors targeting different analytes both in-vitro and in-vivo. Finally, the prospects and challenges of metal-enhanced biosensors for future nanomedicine in achieving ultrasensitive and fast medical diagnostics, high-throughput drug discovery as well as effective and reliable theranostic treatment are discussed.

Quantitative and Sensitive SERS Platform with Analyte Enrichment and Filtration Function

Surface-enhanced Raman scattering (SERS) technique with naturally born analyte identification capability can achieve ultrahigh sensitivity. However, the sensitivity and quantification capability of SERS are assumed to be mutually exclusive. Here, we prohibit the formation of the ultrasensitive SERS sites to achieve a high quantification capability through separating the gold (Au) nanorods from approaching each other with thick metal organic framework (MOF) shells. The sensitivity decrease caused by the absence of the ultrasensitive SERS sites is compensated by the analyte enrichment function of a slippery surface. The porous MOF shell around the Au nanorod only allows analytes smaller than the pore size to approach the Au nanorods and contribute to the SERS spectrum within the complex sample, greatly enhancing the analyte identification capability. Overall, we have demonstrated an integrated SERS platform with analyte enrichment and analyte filtration function, realizing sensitive, quantitative, and size selective analyte identification in complex environments.

Large-Scale Flexible Surface-Enhanced Raman Scattering (SERS) Sensors with High Stability and Signal Homogeneity

Flexible surface-enhanced Raman scattering (SERS) sensors have attracted great attention as a portable and low-cost device for chemical and bio-detection. However, flexible SERS sensors tend to suffer low signal spatial homogeneity due to the uneven distribution of active plasmonic nanostructures (hot spots) and quick degradation of their sensitivity due to low adhesion of hot spots and flexible substrates during fast sampling. Herein, a large-area (20 × 20 cm²) polyimide (PI)-based SERS sensor is exploited for trace detection with high signal homogeneity and stability. The SERS sensor is constructed from PI through in situ growth of silver and gold core-shell nanoparticles (Ag@Au NPs) based on chemical reduction and galvanic replacement processes. Benefiting from the abundant carboxyl groups on the surface-cleaved PI, densely and uniformly distributed Ag@Au NPs are successfully prepared on the film under ambient conditions. The high Raman enhancement factor (EF) (up to 1.07 × 10⁷) and detection capability with low nanomolar (10^-9 M) detection limits are obtained for this flexible SERS sensor. The uniform Raman signals in the random region show good signal homogeneity with a low variation of 8.7%. Moreover, the flexible SERS sensor exhibited superior efficiency and durability after storage for 30 days even after 500 cycles of mechanical stimuli (bending or torsion). The residue of pesticide thiram (tetramethylthiuram disulfide, TMTD) has been rapidly traced by direct sampling from the apple surface, and a sensitivity of 10 ng/cm² for TMTD was achieved. These findings show that the PI-based SERS sensor is a very strong candidate for broad and simple utilization of flexible SERS for both laboratory and commercial applications in chemical and biomolecule detections.

Selectively accessing the hotspots of optical nanoantennas by self-aligned dry laser ablation

Plasmonic nanostructures serve as optical antennas for concentrating the energy of incoming light in localized hotspots close to their surface. By positioning nanoemitters in the antenna hotspots, energy transfer is enabled, leading to novel hybrid antenna-emitter-systems, where the antenna can be used to manipulate the optical properties of the nano-objects. The challenge remains how to precisely position emitters within the hotspots. We report a self-aligned process based on dry laser ablation of a calixarene that enables the attachment of molecules within the electromagnetic hotspots at the tips of gold nanocones. Within the laser focus, the ablation threshold is exceeded in nanoscale volumes, leading to selective access of the hotspot areas. A first indication of the site-selective functionalization process is given by attaching fluorescently labelled proteins to the nanocones. In a second example, Raman-active molecules are selectively attached only to nanocones that were previously exposed in the laser focus, which is verified by surface enhanced Raman spectroscopy. Enabling selective functionalization is an important prerequisite e.g. for preparing single photon sources for quantum optical technologies, or multiplexed Raman sensing platforms.

A novel nucleic acid amplification system based on nano-gap embedded active disk resonators

Recent advances in nucleic acid based testing using bio-optical sensor approaches have been introduced but most are based on hybridization between the optical sensor and the bio-molecule and not on an amplification mechanism. Direct nucleic acid amplification on an optical sensor has several technical limitations, such as the sensitivity of the temperature sensor, instrument complexity, and high background signal. We here describe a novel nucleic acid amplification method based on a whispering gallery mode active resonator and discuss its potential molecular diagnostic application. By implanting nanoclusters as active compounds, this active resonator operates without tapered fiber coupling and emits a strong photoluminescence signal with low background in the wavelength of low absorption in an aqueous environment that is typical of biosensors. Our method also offers an extremely low detection threshold down to a single copy within 10 min due to the strong light-matter interaction in a nano-gap structure. We envision that this active resonator provides a high refractive index contrast for tight mode confinement with simple alignment as well as the possibility of reducing the device size so that a point-of-care system with low-cost, high-sensitivity and simplicity.

Understanding the Role of Metal-Organic Frameworks in Surface-Enhanced Raman Scattering Application

Metal-organic frameworks (MOFs), built from organic linkers and metal ions/clusters, have emerged as highly promising materials for wide applications. Combining highly porous crystalline MOFs with the surface-enhanced Raman scattering (SERS) technique can achieve unprecedented advantages of high selectivity, high sensitivity, and expedience in analysis and detection. In this critical review, the aim is to present a comprehensive review of recent advances in understanding of the roles of MOFs in MOF-SERS systems, particularly their structure-to-property correlation. Key examples are selected from representative literature to illustrate critical concepts and the MOF-based property-dependent applications are particularly emphasized. Finally, the barriers, future trends, and prospects for further advances in MOF-SERS platforms are also discussed.

Molybdenum Trioxide Nanocubes Aligned on a Graphene Oxide Substrate for the Detection of Norovirus by Surface-Enhanced Raman Scattering

A novel biosensing system based on graphene-mediated surface-enhanced Raman scattering (G-SERS) using plasmonic/magnetic molybdenum trioxide nanocubes (mag-MoO₃ NCs) has been designed to detect norovirus (NoV) via a dual SERS nanotag/substrate platform. A novel magnetic derivative of MoO₃ NCs served as the SERS nanotag and the immunomagnetic separation material of the biosensor. Single-layer graphene oxide (SLGO) was adopted as the 2D SERS substrate/capture platform and acted as the signal reporter, with the ability to accommodate an additional Raman molecule as a coreporter. The developed SERS-based immunoassay achieved a signal amplification of up to ∼10⁹-fold resulting from the combined electromagnetic and chemical mechanisms of the dual SERS nanotag/substrate system. The developed biosensor was employed for the detection of NoV in human fecal samples collected from infected patients by capturing the virus with the aid of NoV-specific antibody-functionalized magnetic MoO₃ NCs. This approach enabled rapid signal amplification for NoV detection with this biosensing technology. The biosensor was tested and optimized using NoV-like particles within a broad linear range from 10 fg/mL to 100 ng/mL and a limit of detection (LOD) of ∼5.2 fg/mL. The practical applicability of the developed biosensor to detect clinical NoV subtypes in human fecal samples was demonstrated by effective detection with an LOD of ∼60 RNA copies/mL, which is ∼10³-fold lower than that of a commercial enzyme-linked immunosorbent assay kit for NoV.

Ratiometric Sensing of Polycyclic Aromatic Hydrocarbons Using Capturing Ligand Functionalized Mesoporous Au Nanoparticles as a Surface-Enhanced Raman Scattering Substrate

The absorption behavior between plasmonic nanostructures and a target molecule plays key roles in effective surface-enhanced Raman scattering (SERS) detection. However, for analytes with low surface affinity to the metallic surface, e.g., polycyclic aromatic hydrocarbons (PAHs), it remains challenging to observe the enhanced Raman signal. In this work, we reported a ratiometric SERS strategy for sensitive PAH detection through the surface functionalization of 3D ordered mesoporous Au nanoparticles (meso-Au NPs). By employing mono-6-thio-β-cyclodextrin (HS-β-CD) as capture ligands, the hydrophobic molecules, e.g., anthracene, could be effectively absorbed on the meso-Au NP surface via a host-guest interaction. Besides, a hydrophobic slippery surface is used as a concentrator to deliver and enrich the Au/analyte droplets into a small area. Consequently, the detection limits of anthracene and naphthalene are down to 1 and 10 ppb. The improved SERS enhancement is mainly ascribed to the host-guest effect of HS-β-CD ligands, large surface area and high-density of sub-10 nm mesopores of Au networks, as well as the enrichment effect of hydrophobic slippery surface. Moreover, the HS-β-CD (480 cm^-1 band) could serve as an internal standard, leading to the ratiometric determination of anthracene ranging from 1 ppm to 1 ppb. The proposed surface modification strategy in combination with the hydrophobic slippery surface shows great potential for active capture and trace detection of persistent organic pollutants in real-world SERS applications.

Boosting the Raman signal on a semiconductor-nanotube membrane for reporting photocatalytic reactions on site

A smooth TiO₂ nanotube-based membrane (S-TiNM) is demonstrated to be effective in reducing the Raman-scattering loss in 3D porous structures. Using the photocatalytic reduction of 4-nitrothiophenol as a model, the S-TiNMs show promising potential as sensitive SERS substrates to investigate photocatalytic reactions on site.

Surface-enhanced Raman scattering (SERS)-based immunosystem for ultrasensitive detection of the 90K biomarker

The research and the individuation of tumour markers in biological fluids are currently one of the main tools to support diagnosis, prognosis, and monitoring of the therapeutic response in oncology. Although the identification of tumour markers in asymptomatic patients is crucial for early diagnosis, its application is still limited by the relatively low sensitivity and the complexity of existing methods (i.e. ELISA, mass spectrometry). We developed an easy, fast, and ultrasensitive surface-enhanced Raman scattering (SERS)-based system, for the detection and quantitation of the LGALS3BP (90K) biomarker that was used as a model, based on the development of antibody-functionalized nanostructured gold surfaces. The detection system was effective for the ultrasensitive detection and characterization of samples of different biochemical compositions. In conclusion, this work could provide the foundation for the development of a medical diagnostic device with the highest predictive power when compared with the methods currently used in cancer diagnostics.

ECO-FRIENDLY hybrid hydrogels for detection of phenolic RESIDUES in water using SERS

Herein is presented a simple and sensible method to determine organic pollutants in water, based on the utilization of silver nanoparticles (AgNPs) loaded in Polyacrylamide (PAAm)/starch hybrid hydrogels combined with surface-enhanced Raman scattering (SERS) spectroscopy. The materials were characterized by swelling degree studies, UV-Visible spectroscopy (UV-Vis), X-ray diffraction (XRD) and scanning electron microscopy (SEM). PAAm/starch hydrogels showed variable swelling capacity, according to the synthetic molar composition. The most promising results were attributed to lower concentrations of starch and crosslink agent (N,N'-methylenebisacrylamide - MBA). Spectroscopic analysis confirmed the formation of AgNPs, by noticing the peak at around 420 nm, due to its surface plasmon resonance (SPR) effect. The results showed that AgNPs were stabilized by hydrogels networks. The average size of the AgNPs was smaller than 100 nm and the size and quantity of nanoparticles were influenced by the molar composition of the hydrogel matrix. The SERS substrate based on the AgNPs-PAAm/starch exhibited reproducibility, stability, and limit of detection (LOD) of phenol in water of 1 × 10^-8 M. The average mass of AgNPs-PAAm/starch hydrogels used for each detection analysis was around 10 mg. The spectra with enhanced intensities were possible due to a large number of hot spots generated on the AgNPs-PAAm/starch hydrogel substrate, which leads to potential use for organic pollutant detection. In addition, there is also the possibility of reusing the hydrogel matrix substrate in other analyzes.

Fabrication and Applications of 3D Nanoarchitectures for Advanced Electrocatalysts and Sensors

For the last few decades, nanoscale materials and structures have been extensively studied and developed, making a huge impact on human sustainability. For example, the introduction of nanostructures has brought substantial development in electrocatalysts and optical sensing applications. However, there are still remaining challenges that need to be resolved to further improve their performance, reliability, and cost-effectiveness. Herein, long-range ordered 3D nanostructures and their design principles are introduced with an emphasis on electrocatalysts for energy conversion and plasmonic nanostructures for optical sensing. Among the various fabrication techniques, sequential solvent-injection-assisted nanotransfer printing is suggested as a practical fabrication platform for tunable long-range ordered 3D nanostructures composed of ultrahigh-resolution building blocks. Furthermore, the importance of understanding and controlling the 3D design parameters is discussed to realize more efficient energy conversion as well as effective surface-enhanced Raman spectroscopy analyses, suggesting new solutions for clean energy and healthcare issues.

ZIF-8-modified Au-Ag/Si nanoporous pillar array for active capture and ultrasensitive SERS-based detection of pentachlorophenol

A novel SERS substrate based on a zeolitic imidazolate framework-8 (ZIF-8) film-modified Au-Ag/Si nanoporous pillar array (ZIF-8/Au-Ag/Si-NPA) was successfully fabricated for pentachlorophenol (PCP) detection. The Au-Ag/Si-NPA was synthesized through immersion plating and replacement reaction on the Si-NPA, which was prepared by the hydrothermal etching. The ZIF-8 film was coated via layer-by-layer growth technique. The ZIF-8 film is nanoporous and its thickness can be controlled by varying the growing number, which can significantly influence the SERS performance of the substrate. The substrate with optimal ZIF-8 thickness exhibited an excellent SERS response to PCP molecules. The SERS enhancement factor reached up to 1.8 × 10⁷ and the detection limit was down to 10^-13 M. Moreover, the substrate showed good uniformity with a relative standard deviation (RSD) of 8.7% and good selectivity. The PCP detection is hardly interfered by the coexisting organic compounds. The high SERS performance may be due to the enrichment effect of the ZIF-8 film. The ZIF-8 film could capture and enrich the trace PCP molecules by electrostatic interaction between the negatively charged PCP^- and the positively charged ZIF-8. This work suggests that the ZIF-8/Au-Ag/Si-NPA substrate has potential application in SERS analysis of the polar organic pollutant detection in environmental media.

Facile synthesis of metal-phenolic-coated gold nanocuboids for surface-enhanced Raman scattering

Metal-phenolic networks (MPNs) have been exploited to be a versatile coating film to fabricate core-shell structure due to their general adherent properties. Herein, gold nanocuboid (GNCB) wrapped by MPNs (GNCB at MPNs) are prepared by a facile encapsulation method for surface-enhanced Raman scattering (SERS) analysis. The MPN coating not only reshapes the electric field distribution around the nanostructures but also allows the substrate to adsorb more analytes, both of which contribute to the superior SERS activity of GNCB at MPNs. The SERS signals induced by plasmonic nanostructures increase four- to sixfold after MPN coating, reaching a maximum Raman enhancement factor calculated to be 9.47×10⁸. Moreover, the core-shell SERS substrate also demonstrates improved biocompatibility (∼fivefold increase) that facilitates the reliable SERS analysis of cancer cells and further diverse biomedical applications.

UV Irradiation-Induced SERS Enhancement in Randomly Distributed Au Nanostructures

Currently used platforms for surface-enhanced Raman scattering (SERS) sensors generally employ metallic nanostructures for enrichment of the plasmonic hotspots in order to provide higher Raman signals, but this procedure is still considered challenging for analyte-surface affinity. This study reports a UV irradiation-induced SERS enhancement that amplifies the interactions between the analytes and metallic surfaces. The UV light can play critical roles in the surface cleaning to improve the SERS signal by removing the impurities from the surfaces and the formation of the negatively charged adsorbed oxygen species on the Au surfaces to enhance the analyte-surface affinity. To evaluate this scenario, we prepared randomly distributed Au nanostructures via thermal annealing with a sputtered Au thin film. The UV light of central wavelength 254 nm was then irradiated on the Au nanostructures for 60 min. The SERS efficiency of the Au nanostructures was subsequently evaluated using rhodamine 6G molecules as the representative Raman probe material. The Raman signal of the Au nanostructures after UV treatment was enhanced by up to approximately 68.7% compared to that of those that did not receive the UV treatment. We expect that the proposed method has the potential to be applied to SERS enhancement with various plasmonic platforms.

Polydopamine/Silver Substrates Stemmed from Chiral Silica for SERS Differentiation of Amino Acid Enantiomers

Polydopamine (PDA) and silver (Ag) nanoparticles were first generated on chiral silica nanofibers and then detached from silica to form PDA/Ag composites. The as-obtained PDA/Ag showed surface-enhanced Raman scattering (SERS) activity but very weak circular dichroism optical activity. Interestingly, the PDA/Ag substrates could make a pair of tyrosine (or phenylalanine) enantiomers show different Raman scattering signal intensities, where the differences could reach 3 times. In contrast, PDA/Ag prepared by using racemic or achiral silica did not exhibit such discrimination performance. Therefore, this research offered a novel SERS-based enantiomeric differentiation method with the assistance of plasmonic metal-containing substrates stemmed from intrinsically chiral inorganic silica.

Optimizing the SERS Performance of 3D Substrates through Tunable 3D Plasmonic Coupling toward Label-Free Liver Cancer Cell Classification

Three-dimensional (3D) plasmonic nanostructures are emerging as excellent surface-enhanced Raman spectroscopy (SERS) substrates for chemical and biomedical applications. However, the correlation of 3D (including both in-plane and out-of-plane) plasmonic coupling with the SERS properties to deepen the understanding of 3D SERS substrates remains a challenge. Here, we perform correlation studies of 3D plasmonic coupling and SERS properties of the 3D hierarchical SERS substrates by tuning the multiscale structural elements. The effects of zero-dimensional (0D; the size of the building blocks), one-dimensional (1D; the thickness of the 3D substrates), and two-dimensional (2D; the composition of individual monolayers) structural elements on 3D plasmonic coupling are studied by performing UV-vis-near-infrared (NIR) spectroscopy and measuring SERS performance. It shows that both the extinction spectra and SERS enhancement are tuned at the 3D structural level. It is demonstrated that the plasmonic resonance wavelength (PRW) stemming from the 3D plasmonic coupling correlates with the SERS averaged surface enhancement factor (ASEF) and is improved by more than tenfold at the optimum 3D nanostructure. The optimized substrate is used to quantitatively analyze two small biological molecules. Moreover, as a proof-of-concept study, the substrate is first applied to differentiate between living liver normal and cancer cells with a high prediction accuracy through the spectral features of the cell membranes and the metabolites secreted outside the cells. We expect that the tuning of plasmonic coupling at the 3D level can open up new routes to design high-performance SERS substrates for wide applications.

Hotspots on the Move: Active Molecular Enrichment by Hierarchically Structured Micromotors for Ultrasensitive SERS Sensing

Surface-enhanced Raman scattering (SERS) is recognized as one of the most sensitive spectroscopic tools for chemical and biological detections. Hotspots engineering has expedited promotion of SERS performance over the past few decades. Recently, molecular enrichment has proven to be another effective approach to improve the SERS performance. In this work, we propose a concept of "motile hotspots" to realize ultrasensitive SERS sensing by combining hotspots engineering and active molecular enrichment. High-density plasmonic nanostructure-supporting hotspots are assembled on the tubular outer wall of micromotors via nanoimprint and rolling origami techniques. The dense hotspots carried on these hierarchically structured micromotors (HSMs) can be magnet-powered to actively enrich molecules in fluid. The active enrichment manner of HSMs is revealed to be effective in accelerating the process of molecular adsorption. Consequently, SERS intensity increases significantly because of more molecules being adjacent to the hotspots after active molecular enrichment. This "motile hotspots" concept provides a synergistical approach in constructing a SERS platform with high performance. Moreover, the newly developed construction method of HSMs manifests the possibility of tailoring tubular length and diameter as well as surface patterns on the outer wall of HSMs, demonstrating good flexibility in constructing customized micromotors for various applications.

The structural transition of bimetallic Ag-Au from core/shell to alloy and SERS application

It is well-known that Ag-Au bimetallic nanoplates have attracted significant research interest due to their unique plasmonic properties and surface-enhanced Raman scattering (SERS). In recent years, there have been many studies on the fabrication of bimetallic nanostructures. However, controlling the shape, size, and structure of bimetallic nanostructures still has many challenges. In this work, we present the results of the synthesis of silver nanoplates (Ag NPls), and Ag-Au bimetallic core/shell and alloy nanostructures, using seed-mediated growth under green LED excitation and a gold salt (HAuCl4) as a precursor of gold. The results show that the optical properties and crystal structure strongly depend on the amount of added gold salt. Interestingly, when the amount of gold(x) in the sample was less than 0.6 μmol (x < 0.6 μmol), the structural nature of Ag-Au was core/shell, in contrast x > 0.6 μmol gave the alloy structure. The morphology of the obtained nanostructures was investigated using the field emission scanning electron microscopy (FESEM) technique. The UV-Vis extinction spectra of Ag-Au nanostructures showed localized surface plasmon resonance (LSPR) bands in the spectral range of 402-627 nm which changed from two peaks to one peak as the amount of gold increased. Ag-Au core/shell and alloy nanostructures were utilized as surface enhanced Raman scattering (SERS) substrates to detect methylene blue (MB) (10-7 M concentration). Our experimental observations indicated that the highest enhancement factor (EF) of about 1.2 × 107 was obtained with Ag-Au alloy. Our detailed investigations revealed that the Ag-Au alloy exhibited significant EF compared to pure metal Ag and Ag-Au core/shell nanostructures. Moreover, the analysis of the data revealed a linear dependence between the logarithm of concentration (log C) and the logarithm of SERS signal intensity (log I) in the range of 10-7-10-4 M with a correlation coefficient (R 2) of 0.994. This research helps us understand better the SERS mechanism and the application of Raman spectroscopy on a bimetallic surface.

Multistimulus-Responsive Supramolecular Hydrogels Derived by in situ Coating of Ag Nanoparticles on 5'-CMP-Capped β-FeOOH Binary Nanohybrids with Multifunctional Features and Applications

The present manuscript reports the synthesis of multistimulus-responsive smart supramolecular hydrogels derived by in situ coating of silver nanoparticles (Ag NPs) on colloidal cytidine-5'-monophosphate-capped β-FeOOH nanohybrids (β-FeOOH@5'-CMP) under physiological conditions forming a polycrystalline building block (Ag-coated β-FeOOH@5'-CMP). The presence of Ag in the binary nanohybrids induces the puckering of ribose sugar, bringing a change in its conformation from C2'-endo to C3'-endo, which enhanced the supramolecular interactions among different moieties of other building blocks to construct a porous network of hydrogels in the self-assembly via the formation of a micellar structure. Such a supramolecular network in hydrogel is also evidenced by the reversible sol⇌gel transformation under multistimulus-responsiveness in a narrow range of pH, temperature, and sonication, as well as by the manifestation of rapid self-healing and injectability features. As-synthesized hydrogels exhibiting shear-thinning behavior under higher strain and converting back into the sol under low strain, suggests their potential for localized drug delivery. The presence of Ag NPs in the hydrogel enhanced its viscoelastic properties, % swelling (580) and loading capabilities (590 mg g^-1) for methylene blue (MB), and its controlled release over days (∼2-30) as a function of pH. It displayed excellent surface-enhanced Raman spectroscopy activity allowing to detect MB-like drug molecules at ≤10^-12 M. Thus, the as-synthesized hydrogels represent a unique superparamagnetic nanosystem consisting of all greener components (5'-CMP/β-FeOOH/Ag) with superior viscoelastic, sensing, and antimicrobial properties, displaying multistimulus-responsiveness (pH/temperature/sonication), thereby suggesting their vast potential for biomedical and environmental applications.

Recent Progress in Surface-Enhanced Raman Scattering for the Detection of Chemical Contaminants in Water

Water is a matter of vital importance for all developed countries due to the strong impact on human health and aquatic, wetlands and terrestrial environments. Therefore, the monitoring of water quality is of tremendous importance. The enormous advantages that Surface-enhanced Raman scattering (SERS) spectroscopy offers, such as fingerprint recognition, multiplex capabilities, high sensitivity, and selectivity or non-destructive testing, make this analytical tool very attractive for this purpose. This minireview aims to provide a summary of current approaches for the implementation of SERS sensors in monitoring organic and inorganic pollutants in water. In addition, we briefly highlight current challenges and provide an outlook for the application of SERS in environmental monitoring.

Ultrathin Hexagonal PbO Nanosheets Induced by Laser Ablation in Water for Chemically Trapping Surface-Enhanced Raman Spectroscopy Chips and Detection of Trace Gaseous H2S

Lead oxide (PbO) nanosheets are of significance in the design of functional devices. However, facile, green, and fast fabrication of ultrathin and homogenous PbO nanosheets with a chemically clean surface is still desirable. Herein, a simple and chemically clean route is developed for fabricating such nanosheets via laser ablation of a lead target in water for a short time and then ambient aging. The obtained PbO nanosheets are (002)-oriented with microsize in planar dimension and ∼15 nm in thickness. They are mostly hexagonal in shape. Experimental observations of the morphological evolution have revealed that the formation of such PbO nanosheets can be attributed to two processes: (i) laser ablation-induced formation of ultrafine Pb and PbO nanoparticles (NPs) and (ii) PbO NP aggregation and their oriented connection growth. Importantly, a composite surface-enhanced Raman spectroscopy (SERS) chip is designed and fabricated by covering a PbO nanosheet monolayer on a Au NP film. Such a composite SERS chip can be used for the fast and trace detection of gaseous H₂S in which the PbO nanosheets can effectively chemically trap H₂S molecules, demonstrating a new application of these PbO nanosheets. The response of this chip to H₂S can be detected within 10 s, and the detection limit is below 1 ppb. Also, this PbO nanosheet-based chip is reusable by heating after use. This study not only deepens the understanding of the NP-based formation mechanism of nanosheets but also provides the renewable SERS chips for the highly efficient detection of trace gaseous H₂S.

Gold Nanoparticle-Coated Starch Magnetic Beads for the Separation, Concentration, and SERS-Based Detection of E. coli O157:H7

Here, we report gold nanoparticle-coated starch magnetic beads (AuNP@SMBs) that were prepared by in situ synthesis of AuNPs on the surface of SMBs. Upon functionalization of the surface with a specific antibody, the immuno-AuNP@SMBs were found to be effective in separating and concentrating the target pathogenic bacteria, Escherichia coli O157:H7, from an aqueous sample as well as providing a hotspot for surface-enhanced Raman scattering (SERS)-based detection. We employed a bifunctional linker protein, 4× gold-binding peptide-tagged Streptococcal protein G (4GS), to immobilize antibodies on AuNP@SMBs and AuNPs in an oriented form. The linker protein also served as a Raman reporter, exhibiting a strong and unique fingerprint signal during the SERS measurement. The amplitude of the SERS signal was shown to have a good correlation with the concentration of target bacteria ranging from 10⁰ to 10⁵ CFU/mL. The detection limit was determined to be as low as a single cell, and the background signals derived from nontarget bacteria were negligible due to the excellent specificity and colloidal stability of the immuno-AuNP@SMBs and SERS tags. The highly sensitive nature of the SERS-based detection system will provide a promising means to detect the pathogenic microorganisms in food or clinical specimen.

Thiol-Poly(Sodium Styrene Sulfonate) (PolyNaSS-SH) Gold Complexes: From a Chemical Design to a One-Step Synthesis of Hybrid Gold Nanoparticles and Their Interaction with Human Proteins

This study highlights recent advances in the synthesis of nanoconjugates based on gold (Au(III)) complex with a bioactive polymer bearing sulfonate groups called thiol-poly(sodium styrene sulfonate) (PolyNaSS-SH) with various molecular weights (5, 10, and 35 kDa). The three nanomaterials differ substantially in shape and structure. In particular, for PolyNaSS-SH of 35 kDa, we obtained a characteristic core-shell flower shape after chelation of the Au(III) ions and successively reduction with sodium borohydride (NaBH₄). The mechanism of formation of the hybrid nanoparticles (PolyNaSS-SH@AuNPs (35 kDa) and their interactions between plasmatic proteins (human serum albumin (HSA), collagen I (Col 1), and fibronectin (Fn)) were deeply studied from a chemical and physical point of view by using several analytical techniques such as Raman spectroscopy, UV-visible, transmission electron microscopy (TEM), ¹H NMR, and X-ray photoelectron spectroscopy (XPS).

Facile In Situ Photochemical Synthesis of Silver Nanoaggregates for Surface-Enhanced Raman Scattering Applications

Recently, photochemical synthesis has attracted wide interest on in situ preparing the surface-enhanced Raman scattering (SERS) substrate with excellent performance, especially in a compact space and microfluidic channel. Herein, a facile, green and cost-effective approach to in situ photochemically synthesize silver nanoaggregates is demonstrated for SERS applications. By adjusting the photo-irradiation conditions, the morphologies and sizes of the silver nanoaggregates can be deliberately tailored. The synthesized silver nanoaggregates-based substrates exhibit a highly sensitive and reproducible SERS activity with a low detection limit of 10^-8 M for 4-Aminothiophenol detection and relative standard deviation of 12.3%, paving an efficient and promising route for in situ SERS-based rapid detection in the environmental monitoring and food quality control.

"Burning Lamp"-like Robust Molecular Enrichment for Ultrasensitive Plasmonic Nanosensors

Enriching and locating target analytes into specific "hot spots" are vital for ultrasensitive molecular identification and detection using plasmonic-based techniques. Inspired by mass transportation in lamp wicks, we develop an effective enrichment strategy for highly diluted analytes in which analytes and Au nanoparticles are transported via a solution microflow under the capillarity driving force of glass fiber papers to a heated region. After evaporation, a large volume of a solution containing analytes and Au nanoparticles is condensed into a very limited area, and thus, analyte molecules are effectively enriched and located into surface-enhanced Raman scattering (SERS) hot spots. Using this enrichment strategy, the sensitivity and detection limits of SERS are remarkably improved. Detection levels of crystal violet and anthracene are down to 10^-16 and 10^-10 M, respectively. This enrichment strategy is very robust and easy to implement, and it can potentially be exploited in various plasmonic-based molecular detection and identification techniques.

Molecular-Imprinting-Based Surface-Enhanced Raman Scattering Sensors

Molecularly imprinted polymers (MIPs) receive extensive interest, owing to their structure predictability, recognition specificity, and application universality as well as robustness, simplicity, and inexpensiveness. Surface-enhanced Raman scattering (SERS) is regarded as an ideal optical detection candidate for its unique features of fingerprint recognition, nondestructive property, high sensitivity, and rapidity. Accordingly, MIP based SERS (MIP-SERS) sensors have attracted significant research interest for versatile applications especially in the field of chemo- and bioanalysis, showing excellent identification and detection performances. Herein, we comprehensively review the recent advances in MIP-SERS sensors construction and applications, including sensing principles and signal enhancement mechanisms, focusing on novel construction strategies and representative applications. First, the basic structure of the MIP-SERS sensors is briefly outlined. Second, novel imprinting strategies are highlighted, mainly including multifunctional monomer imprinting, dummy template imprinting, living/controlled radical polymerization, and stimuli-responsive imprinting. Third, typical application of MIP-SERS sensors in chemo/bioanalysis is summarized from both small and macromolecular aspects. Lastly, the challenges and perspectives of the MIP-SERS sensors are proposed, orienting sensitivity improvement and application expanding.

Sensitive and reliable detection of deoxynivalenol mycotoxin in pig feed by surface enhanced Raman spectroscopy on silver nanocubes@polydopamine substrate

Deoxynivalenol (DON) is one of the trichothecene mycotoxin, a frequent contaminant of pig feed. Surface-enhanced Raman spectroscopy (SERS) is a fast and ultrasensitive analytical tool for point-of-need applications to identify molecular fingerprint structures at low concentrations. However, the use of SERS for analyte detection with flexible and robust structures is still challenging. Herein, we have developed core-shell silver nanocubes coated with polydopamine (Ag NCs@PDA) SERS substrate for the quantitative detection of deoxynivalenol in pig feed. The Ag NCs@PDA substrate with ultrathin (1.6 nm) PDA shell thickness enhances the absorption of DON via hydrogen bonding and π-π stacking interactions, as well as improves the stability of the substrate. The results of the SERS showed a high analytical enhancement factor (AEF) of 1.82 × 10⁷ and a detection limit (LOD) as low as femtomolar range (0.82 fM). The LOD of the Ag NCs@PDA substrate for DON detection is 1.8 times lower than the bare Ag NCs. Furthermore, the Ag NCs@PDA substrate is stable which retains 88.24% of the original Raman intensity after storage for three months. The obtained results demonstrate that the Ag NCs@PDA substrates can realize label-free detection of deoxynivalenol mycotoxin with high sensitivity, reproducibility, and stability. Our work proposes a low-cost method for the designing of the SERS sensing device, and has great potential to be applied in food safety, biomedical sciences, and environmental monitoring.