Thermodynamic basis of the enhanced specificity of structured DNA probes

Design, synthesis, and characterization of nucleic-acid-functionalized gold surfaces for biomarker detection

Nucleic-acid-functionalized gold surfaces have been used extensively for the development of biological sensors. The development of an effective biomarker detection assay requires careful design, synthesis, and characterization of probe components. In this Feature Article, we describe fundamental probe development constraints and provide a critical appraisal of the current methodologies and applications in the field. We discuss critical issues and obstacles that impede the sensitivity and reliability of the sensors to underscore the challenges that must be met to advance the field of biomarker detection.

In vitro quantification of specific microRNA using molecular beacons

MicroRNAs (miRNAs), a class of non-coding RNAs, have become a major focus of molecular biology research because of their diverse genomic origin and ability to regulate an array of cellular processes. Although the biological functions of miRNA are yet to be fully understood, tissue levels of specific miRNAs have been shown to correlate with pathological development of disease. Here, we demonstrate that molecular beacons can readily distinguish mature- and pre-miRNAs, and reliably quantify miRNA expression. We found that molecular beacons with DNA, RNA and combined locked nucleic acid (LNA)–DNA backbones can all detect miRNAs of low (<1 nM) concentrations in vitro, with RNA beacons having the highest detection sensitivity. Furthermore, we found that molecular beacons have the potential to distinguish miRNAs that have slight variations in their nucleotide sequence. These results suggest that the molecular beacon-based approach to assess miRNA expression and distinguish mature and precursor miRNA species is quite robust, and has the promise for assessing miRNA levels in biological samples.

Fumarate reductase activity maintains an energized membrane in anaerobic Mycobacterium tuberculosis

Oxygen depletion of Mycobacterium tuberculosis engages the DosR regulon that coordinates an overall down-regulation of metabolism while up-regulating specific genes involved in respiration and central metabolism. We have developed a chemostat model of M. tuberculosis where growth rate was a function of dissolved oxygen concentration to analyze metabolic adaptation to hypoxia. A drop in dissolved oxygen concentration from 50 mmHg to 0.42 mmHg led to a 2.3 fold decrease in intracellular ATP levels with an almost 70-fold increase in the ratio of NADH/NAD(+). This suggests that re-oxidation of this co-factor becomes limiting in the absence of a terminal electron acceptor. Upon oxygen limitation genes involved in the reverse TCA cycle were upregulated and this upregulation was associated with a significant accumulation of succinate in the extracellular milieu. We confirmed that this succinate was produced by a reversal of the TCA cycle towards the non-oxidative direction with net CO(2) incorporation by analysis of the isotopomers of secreted succinate after feeding stable isotope ((13)C) labeled precursors. This showed that the resulting succinate retained both carbons lost during oxidative operation of the TCA cycle. Metabolomic analyses of all glycolytic and TCA cycle intermediates from (13)C-glucose fed cells under aerobic and anaerobic conditions showed a clear reversal of isotope labeling patterns accompanying the switch from normoxic to anoxic conditions. M. tuberculosis encodes three potential succinate-producing enzymes including a canonical fumarate reductase which was highly upregulated under hypoxia. Knockout of frd, however, failed to reduce succinate accumulation and gene expression studies revealed a compensatory upregulation of two homologous enzymes. These major realignments of central metabolism are consistent with a model of oxygen-induced stasis in which an energized membrane is maintained by coupling the reductive branch of the TCA cycle to succinate secretion. This fermentative process may offer unique targets for the treatment of latent tuberculosis.

Conformational changes of non-B DNA

In contrast to B-DNA that has a right-handed double helical structure with Watson-Crick base pairing under the ordinary physiological conditions, repetitive DNA sequences under certain conditions have the potential to fold into non-B DNA structures such as hairpin, triplex, cruciform, left-handed Z-form, tetraplex, A-motif, etc. Since the non-B DNA-forming sequences induce the genetic instability and consequently can cause human diseases, the molecular mechanism for their genetic instability has been extensively investigated. On the contrary, non-B DNA can be widely used for application in biotechnology because many DNA breakage hotspots are mapped in or near the sequences that have the potential to adopt non-B DNA structures. In addition, they are regarded as a fascinating material for the nanotechnology using non-B DNAs because they do not produce any toxic byproducts and are robust enough for the repetitive working cycle. This being the case, an understanding on the mechanism and dynamics of their structural changes is important. In this critical review, we describe the latest studies on the conformational dynamics of non-B DNAs, with a focus on G-quadruplex, i-motif, Z-DNA, A-motif, hairpin and triplex (189 references).

Influence of a hairpin loop on the thermodynamic stability of a DNA oligomer

DSC was used to evaluate the mechanism of the thermally induced unfolding of the single-stranded hairpin HP = 5′-CGGAATTCCGTCTCCGGAATTCCG-3′ and its core duplex D (5′-CGGAATTCCG-3′)₂. The DSC melting experiments performed at several salt concentrations were successfully described for HP and D in terms of a three-state transition model HP↔I (intermediate state) ↔ S (unfolded single-stranded state) and two state transition model D↔2S, respectively. Comparison of the model-based thermodynamic parameters obtained for each HP and D transition shows that in unfolding of HP only the HP↔I transition is affected by the TCTC loop. This observation suggests that in the intermediate state its TCTC loop part exhibits significantly more flexible structure than in the folded state while its duplex part remains pretty much unchanged.

Molecular beacons: powerful tools for imaging RNA in living cells

Recent advances in RNA functional studies highlights the pivotal role of these molecules in cell physiology. Diverse methods have been implemented to measure the expression levels of various RNA species, using either purified RNA or fixed cells. Despite the fact that fixed cells offer the possibility to observe the spatial distribution of RNA, assays with capability to real-time monitoring RNA transport into living cells are needed to further understand the role of RNA dynamics in cellular functions. Molecular beacons (MBs) are stem-loop hairpin-structured oligonucleotides equipped with a fluorescence quencher at one end and a fluorescent dye (also called reporter or fluorophore) at the opposite end. This structure permits that MB in the absence of their target complementary sequence do not fluoresce. Upon binding to targets, MBs emit fluorescence, due to the spatial separation of the quencher and the reporter. Molecular beacons are promising probes for the development of RNA imaging techniques; nevertheless much work remains to be done in order to obtain a robust technology for imaging various RNA molecules together in real time and in living cells. The present work concentrates on the different requirements needed to use successfully MB for cellular studies, summarizing recent advances in this area.

Measuring thermodynamic details of DNA hybridization using fluorescence

Modern real-time PCR systems make it easy to monitor fluorescence while temperature is varied for hundreds of samples in parallel, permitting high-throughput studies. We employed such system to investigate melting transitions of ordered nucleic acid structures into disordered random coils. Fluorescent dye and quencher were attached to oligonucleotides in such a way that changes of fluorescence intensity with temperature indicated progression of denaturation. When fluorescence melting data were compared with traditional ultraviolet optical experiments, commonly used dye/quencher combinations, like fluorescein and tetramethylrhodamine, showed substantial discrepancies. We have therefore screened 22 commercially available fluorophores and quenchers for their ability to reliably report annealing and melting transitions. Dependence of fluorescence on temperature and pH was also investigated. The optimal performance was observed using Texas Red or ROX dyes with Iowa Black RQ or Black Hole quenchers. These labels did not alter two-state nature of duplex melting process and provided accurate melting temperatures, free energies, enthalpies, and entropies. We also suggest a new strategy for determination of DNA duplex thermodynamics where concentration of a dye-labeled strand is kept constant and its complementary strand modified with a quencher is added at increasing excess. These methodological improvements will help build predictive models of nucleic acid hybridization.

Rapid detection of urinary tract infections using isotachophoresis and molecular beacons

We present a novel assay for rapid detection and identification of bacterial urinary tract infections using isotachophoresis (ITP) and molecular beacons. We applied on-chip ITP to extract and focus 16S rRNA directly from bacterial lysate and used molecular beacons to achieve detection of bacteria specific sequences. We demonstrated detection of E. coli in bacteria cultures as well as in patient urine samples in the clinically relevant range 1E6-1E8 cfu/mL. For bacterial cultures we further demonstrate quantification in this range. The assay requires minimal sample preparation (a single centrifugation and dilution), and can be completed, from beginning of lysing to detection, in under 15 min. We believe that the principles presented here can be used for design of other rapid diagnostics or detection methods for pathogenic diseases.

Rare allele enrichment and detection by allele-specific PCR, competitive probe blocking, and melting analysis

Differential amplification of variant and wild-type alleles by PCR is often used for rare allele enrichment. We have combined allele-specific PCR, competitive probe blocking, asymmetric PCR, and melting analysis to enhance rare allele detection in a homogeneous system. Unlabeled, dual hybridization or molecular beacon probes were used for competitive blocking of the wild-type allele at a concentration 10 times that of the allele-specific primer. In each case, rare alleles were detected by probe melting analysis at a sensitivity of >0.001% (1 variant copy within 100,000 wild-type copies), providing single copy detection in typical PCRs. Ninety-one thyroid biopsies were tested for the BRAF mutation p.V600E (c.1799 T > A) by both dual hybridization probes without enrichment and an allele-specific, competitive blocking melting analysis with unlabeled probes. Eighty-seven samples were concordant between methods (43 positive, 44 negative), while 4 samples that were negative by direct analysis became positive after enrichment. Probes that both block wild-type amplification and detect rare variants by melting analysis improve the detection sensitivity of allele-specific PCR for rare alleles. In particular, melting analysis using unlabeled probes and amplification by rapid-cycle PCR provides cost-effective and fast enrichment and detection of rare alleles.

"Off-on" electrochemical hairpin-DNA-based genosensor for cancer diagnostics

A simple and robust "off-on" signaling genosensor platform with improved selectivity for single-nucleotide polymorphism (SNP) detection based on the electronic DNA hairpin molecular beacons has been developed. The DNA beacons were immobilized onto gold electrodes in their folded states through the alkanethiol linker at the 3'-end, while the 5'-end was labeled with a methylene blue (MB) redox probe. A typical "on-off" change of the electrochemical signal was observed upon hybridization of the 27-33 nucleotide (nt) long hairpin DNA to the target DNA, in agreement with all the hitherto published data. Truncation of the DNA hairpin beacons down to 20 nts provided improved genosensor selectivity for SNP and allowed switching of the electrochemical genosensor response from the on-off to the off-on mode. Switching was consistent with the variation in the mechanism of the electron transfer reaction between the electrode and the MB redox label, for the folded beacon being characteristic of the electrochemistry of adsorbed species, while for the "open" duplex structure being formally controlled by the diffusion of the redox label within the adsorbate layer. The relative current intensities of both processes were governed by the length of the formed DNA duplex, potential scan rate, and apparent diffusion coefficient of the redox species. The off-on genosensor design used for detection of a cancer biomarker TP53 gene sequence favored discrimination between the healthy and SNP-containing DNA sequences, which was particularly pronounced at short hybridization times.

Rapid detection of the epidermal growth factor receptor mutation in non-small-cell lung cancer for analysis of acquired resistance using molecular beacons

A secondary mutation (T790M) in epidermal growth factor receptor (EGFR) is a hallmark of acquired resistance to EGFR inhibitors used to treat non-small-cell lung cancer (NSCLC). Therefore, identifying the T790M mutation is crucial to guide treatment decisions. Given that DNA sequencing methods are time-consuming and insensitive, we developed and investigated the feasibility of using molecular beacons for the detection of the T790M mutation in EGFR. A molecular beacon complementary to the region of the secondary EGFR mutation (T790M) was designed and used in NSCLC samples bearing drug-sensitive and -resistant EGFR mutations. For a rapid and simple assay, we attempted to use the molecular beacon with real-time PCR and in situ fluorescence imaging. The ability of the designed molecular beacon to specifically detect the T790M mutation of EGFR was tested for samples from two patients with drug resistance and compared with conventional DNA sequencing methods. The molecular beacon successfully detected the T790M mutation in patient samples with drug resistance. The sensitivity of the molecular beacon, which detected as little as 2% of genomic DNA from the drug-resistant cells (H1975), was much higher than direct sequencing. Furthermore, in situ fluorescence imaging with the molecular beacon gave rise to a distinguishable signal for the T790M mutation in drug-resistant cells. The molecular beacon-based approach enabled rapid and sensitive detection of the EGFR mutation (T790M) in NSCLC with in situ fluorescence imaging, which can be directed to determine various treatment options in patients with cancer.

Combination of DNA ligase reaction and gold nanoparticle-quenched fluorescent oligonucleotides: a simple and efficient approach for fluorescent assaying of single-nucleotide polymorphisms

A new fluorescent sensing approach for detection of single-nucleotide polymorphisms (SNPs) is proposed based on the ligase reaction and gold nanoparticle (AuNPs)-quenched fluorescent oligonucleotides. The design exploits the strong fluorescence quenching of AuNPs for organic dyes and the difference in noncovalent interactions of the nanoparticles with single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA), where ssDNA can be adsorbed onto the surface of AuNPs while dsDNA cannot be. In the assay, two half primer DNA probes, one being labeled with a dye and the other being phosphorylated, were first incubated with a target DNA template. In the presence of DNA ligase, the two captured ssDNAs are linked for the perfectly matched DNA target to form a stable duplex, but the duplex could not be formed by the single-base mismatched DNA template. After addition of AuNPs, the fluorescence of dye-tagged DNA probe will be efficiently quenched unless the perfectly matched DNA target is present. To demonstrate the feasibility of this design, the performance of SNP detection using two different DNA ligases, T4 DNA ligase and Escherichia coli DNA ligase, were investigated. In the case of T4 DNA ligase, the signal enhancement of the dye-tagged DNA for perfectly matched DNA target is 4.6-fold higher than that for the single-base mismatched DNA. While in the presence of E. coli DNA ligase, the value raises to be 30.2, suggesting excellent capability for SNP discrimination.

DNAzyme molecular beacon probes for target-induced signal-amplifying colorimetric detection of nucleic acids

A novel DNAzyme molecular beacon (DNAzymeMB) strategy was developed for target-induced signal-amplifying colorimetric detection of target nucleic acids. The DNAzymeMB, which exhibits peroxidase activity in its free hairpin structure, was engineered to form a catalytically inactive hybrid through hybridization with a blocker DNA. The presence of target DNA leads to dissociation of the DNAzymeMB from the inactive hybrid through hybridization with the blocker DNA. This process results in recovery of the catalytically active DNAzymeMB, which can catalyze a colorimetric reaction that signals the presence of the target DNA. In addition, a primer was rationally designed to anneal to the blocker DNA of the blocker/target DNA duplex and displace the bound target DNA during the extension reaction. The released target DNA triggers the next cycle involving hybridization with blocker DNA, DNAzymeMB dissociation, primer extension, and target displacement. This unique amplifying strategy leads to the generation of multiple numbers of active DNAzymeMB molecules from a single target molecule and gives a detection limit down to 1 pM, a value that is nearly 3 or 5 orders of magnitude lower than those of previously reported DNAzyme molecular beacon-based DNA detection methods.

A single molecular beacon probe is sufficient for the analysis of multiple nucleic acid sequences

Molecular beacon (MB) probes are dual-labeled hairpin-shaped oligodeoxyribonucleotides that are extensively used for real-time detection of specific RNA/DNA analytes. In the MB probe, the loop fragment is complementary to the analyte: therefore, a unique probe is required for the analysis of each new analyte sequence. The conjugation of an oligonucleotide with two dyes and subsequent purification procedures add to the cost of MB probes, thus reducing their application in multiplex formats. Here we demonstrate how one MB probe can be used for the analysis of an arbitrary nucleic acid. The approach takes advantage of two oligonucleotide adaptor strands, each of which contains a fragment complementary to the analyte and a fragment complementary to an MB probe. The presence of the analyte leads to association of MB probe and the two DNA strands in quadripartite complex. The MB probe fluorescently reports the formation of this complex. In this design, the MB does not bind the analyte directly; therefore, the MB sequence is independent of the analyte. In this study one universal MB probe was used to genotype three human polymorphic sites. This approach promises to reduce the cost of multiplex real-time assays and improve the accuracy of single-nucleotide polymorphism genotyping.

A DNA--silver nanocluster probe that fluoresces upon hybridization

DNA-templated silver nanoclusters (DNA/Ag NCs) are an emerging set of fluorophores that are smaller than semiconductor quantum dots and can have better photostability and brightness than commonly used organic dyes. Here we find the red fluorescence of DNA/Ag NCs can be enhanced 500-fold when placed in proximity to guanine-rich DNA sequences. On the basis of this new phenomenon, we have designed a DNA detection probe (NanoCluster Beacon, NCB) that "lights up" upon target binding. Since NCBs do not rely on Forster energy transfer for quenching, they can easily reach high (>100) signal-to-background ratios (S/B ratios) upon target binding. Here, in a separation-free assay, we demonstrate NCB detection of an influenza target with a S/B ratio of 175, a factor of 5 better than a conventional molecular beacon probe. Since the observed fluorescence enhancement is caused by intrinsic nucleobases, our detection technique is simple, inexpensive, and compatible with commercial DNA synthesizers.

Increasing the sensitivity and single-base mismatch selectivity of the molecular beacon using graphene oxide as the "nanoquencher"

Here, we report a novel, highly sensitive, selective and economical molecular beacon using graphene oxide as the "nanoquencher". This novel molecular beacon system contains a hairpin-structured fluorophore-labeled oligonucleotide and a graphene oxide sheet. The strong interaction between hairpin-structured oligonucleotide and graphene oxide keep them in close proximity, facilitating the fluorescence quenching of the fluorophore by graphene oxide. In the presence of a complementary target DNA, the binding between hairpin-structured oligonucleotide and target DNA will disturb the interaction between hairpin-structured oligonucleotide and graphene oxide, and release the oligonucleotide from graphene oxide, resulting in restoration of fluorophore fluorescence. In the present study, we show that this novel graphene oxide quenched molecular beacon can be used to detect target DNA with higher sensitivity and single-base mismatch selectivity compared to the conventional molecular beacon.

A dumbbell probe-mediated rolling circle amplification strategy for highly sensitive microRNA detection

We herein report the design of a dumbbell-shaped DNA probe that integrates target-binding, amplification and signaling within one multifunctional design. The dumbbell probe can initiate rolling circle amplification (D-RCA) in the presence of specific microRNA (miRNA) targets. This D-RCA-based miRNA strategy allows quantification of miRNA with very low quantity of RNA samples. The femtomolar sensitivity of D-RCA compares favorably with other existing technologies. More significantly, the dynamic range of D-RCA is extremely large, covering eight orders of magnitude. We also demonstrate miRNA quantification with this highly sensitive and inexpensive D-RCA strategy in clinical samples.

A graphene-enhanced molecular beacon for homogeneous DNA detection

In this work, we report the design of a novel graphene-based molecular beacon (MB) that could sensitively and selectively detect specific DNA sequences. The ability of water-soluble graphene oxide (GO) to differentiated hairpin and dsDNA offered a new approach to detect DNA. We found that the background fluorescence of MB was significantly suppressed in the presence of GO, which increased the signal-to-background ratio, hence the sensitivity. Moreover, the single-mismatch differentiation ability of hairpin DNA was maintained, leading to high selectivity of this new method.

Protein analysis based on molecular beacon probes and biofunctionalized nanoparticles

With the completion of the human genome-sequencing project, there has been a resulting change in the focus of studies from genomics to proteomics. By utilizing the inherent advantages of molecular beacon probes and biofunctionalized nanoparticles, a series of novel principles, methods and techniques have been exploited for bioanalytical and biomedical studies. This review mainly discusses the applications of molecular beacon probes and biofunctionalized nanoparticles-based technologies for real-time, in-situ, highly sensitive and highly selective protein analysis, including the nonspecific or specific protein detection and separation, protein/DNA interaction studies, cell surface protein recognition, and antigen-antibody binding process-based bacteria assays. The introduction of molecular beacon probes and biofunctionalized nanoparticles into the protein analysis area would necessarily advance the proteomics research.

The effect of tryptophan on UV-induced DNA photodamage

Trp-DNA adducts resulting from UV irradiation of pyrimidine bases and nucleotides in the presence of tryptophan (Trp) have been the subject of previous research. However, the relative yield of the adducts compared with the UV screening effect of Trp has not been previously considered. To determine whether Trp-DNA adduct formation or absorption "screening" by Trp is the predominant process when DNA solutions are irradiated with UV light in the presence of Trp, we irradiated Trp-containing DNA oligonucleotide solutions with UVC light and incubated aliquots of those solutions with molecular beacons (MBs) to detect the damage. We observed a rapid decay of fluorescence of the MBs for pure DNA solutions, thereby indicating damage. However, in the presence of Trp, the fluorescence decay is prolonged, with time constants that increase exponentially with Trp concentration. The results are discussed in terms of a beneficial in vivo cellular protection rather than harmful adduct formation and suggest a net sacrificial absorption of UV light by Trp which actually protects the DNA from UV damage.

Miniaturization of molecular biological techniques for gene assay

The rapid diagnosis of various diseases is a critical advantage of many emerging biomedical tools. Due to advances in preventive medicine, tools for the accurate analysis of genetic mutation and associated hereditary diseases have attracted significant interests in recent years. The entire diagnostic process usually involves two critical steps, namely, sample pre-treatment and genetic analysis. The sample pre-treatment processes such as extraction and purification of the target nucleic acids prior to genetic analysis are essential in molecular diagnostics. The genetic analysis process may require specialized apparatus for nucleic acid amplification, sequencing and detection. Traditionally, pre-treatment of clinical biological samples (e.g. the extraction of deoxyribonucleic acid (DNA) or ribonucleic acid (RNA)) and the analysis of genetic polymorphisms associated with genetic diseases are typically a lengthy and costly process. These labor-intensive and time-consuming processes usually result in a high-cost per diagnosis and hinder their practical applications. Besides, the accuracy of the diagnosis may be affected owing to potential contamination from manual processing. Alternatively, due to significant advances in micro-electro-mechanical-systems (MEMS) and microfluidic technology, there are numerous miniature systems employed in biomedical applications, especially for the rapid diagnosis of genetic diseases. A number of advantages including automation, compactness, disposability, portability, lower cost, shorter diagnosis time, lower sample and reagent consumption, and lower power consumption can be realized by using these microfluidic-based platforms. As a result, microfluidic-based systems are becoming promising platforms for genetic analysis, molecular biology and for the rapid detection of genetic diseases. In this review paper, microfluidic-based platforms capable of identifying genetic sequences and diagnosis of genetic mutations are surveyed and reviewed. Some critical issues with the use of microfluidic-based systems for diagnosis of genetic diseases are also highlighted.

RNA-cleaving deoxyribozyme sensor for nucleic acid analysis: the limit of detection

Along with biocompatibility, chemical stability, and simplicity of structural prediction and modification, deoxyribozyme-based molecular sensors have the potential of an improved detection limit due to their ability to catalytically amplify signal. This study contributes to the understanding of the factors responsible for the limit of detection (LOD) of RNA-cleaving deoxyribozyme sensors. A new sensor that detects specific DNA/RNA sequences was designed from deoxyribozyme OA-II [Chiuman, W.; Li, Y. (2006) J. Mol. Biol. 357, 748-754]. The sensor architecture allows for a unique combination of high selectivity, low LOD and the convenience of fluorescent signal monitoring in homogeneous solution. The LOD of the sensor was found to be approximately 1.6 x 10(-10) M after 3 h of incubation. An equation that allows estimation of the lowest theoretical LOD using characteristics of parent deoxyribozymes and their fluorogenic substrates was derived and experimentally verified. According to the equation, "catalytically perfect" enzymes can serve as scaffolds for the design of sensors with the LOD not lower than approximately 2 x 10(-15) M after 3 h of incubation. A new value termed the detection efficiency (DE) is suggested as a time-independent characteristic of a sensor's sensitivity. The expressions for the theoretical LOD and DE can be used to evaluate nucleic acid and protein enzymes for their application as biosensing platforms.

Surpassing specificity limits of nucleic acid probes via cooperativity

The failure to correctly identify single nucleotide polymorphisms (SNPs) significantly contributes to the misdiagnosis of infectious disease. Contrary to the strategy of creating shorter probes to improve SNP differentiation, we created larger probes that appeared to increase selectivity. Specifically, probes with enhanced melting temperature differentials (>13x improvement) to SNPs were generated by linking two probes that consist of both a capture sequence and a detection sequence; these probes act cooperatively to improve selectivity over a wider range of reaction conditions. These cooperative probe constructs (Tentacle probes) were then compared by modeling thermodynamic and hybridization characteristics to both Molecular Beacons (stem loop DNA probes) and Taqman probes (a linear oligonucleotide). The biophysical models reveal that cooperative probes compared with either Molecular beacons or Taqman probes have enhanced specificity. This was a result of increased melting temperature differentials and the concentration-independent hybridization revealed between wild-type and variant sequences. We believe these findings of order of magnitude enhanced melting temperature differentials with probes possessing concentration independence and more favorable binding kinetics have the potential to significantly improve molecular diagnostic assay functionality.

NANOSTRUCTURED PROBES FOR IN VIVO GENE DETECTION

The ability to visualize in real-time the expression dynamics and localization of specific RNAs in vivo offers tremendous opportunities for biological and disease studies including cancer detection. However, quantitative methods such as real-time PCR and DNA microarrays rely on the use of cell lysates thus not able to obtain important spatial and temporal information. Fluorescence proteins and other reporter systems cannot image endogenous RNA in living cells. Fluorescence in situ hybridization (FISH) assays require washing to achieve specificity, therefore can only be used with fixed cells. Here we review the recent development of nanostructured probes for living cell RNA detection, and discuss the biological and engineering issues and challenges of quantifying gene expression in vivo. In particular, we describe methods that use oligonucleotide probes, combined with novel delivery strategies, to image the relative level, localization and dynamics of RNA in live cells. Examples of detecting endogenous mRNAs, as well as imaging their subcellular localization are given to illustrate the biological applications, and issues in probe design, delivery and target accessibility are discussed. The nanostructured probes promise to open new and exciting opportunities in sensitive gene detection for a wide range of biological and medical applications.

Equilibrium conformational dynamics in an RNA tetraloop from massively parallel molecular dynamics

Conformational equilibrium within the ubiquitous GNRA tetraloop motif was simulated at the ensemble level, including 10 000 independent all-atom molecular dynamics trajectories totaling over 110 µs of simulation time. This robust sampling reveals a highly dynamic structure comprised of 15 conformational microstates. We assemble a Markov model that includes transitions ranging from the nanosecond to microsecond timescales and is dominated by six key loop conformations that contribute to fluctuations around the native state. Mining of the Protein Data Bank provides an abundance of structures in which GNRA tetraloops participate in tertiary contact formation. Most predominantly observed in the experimental data are interactions of the native loop structure within the minor groove of adjacent helical regions. Additionally, a second trend is observed in which the tetraloop assumes non-native conformations while participating in multiple tertiary contacts, in some cases involving multiple possible loop conformations. This tetraloop flexibility can act to counterbalance the energetic penalty associated with assuming non-native loop structures in forming tertiary contacts. The GNRA motif has thus evolved not only to readily participate in simple tertiary interactions involving native loop structure, but also to easily adapt tetraloop secondary conformation in order to participate in larger, more complex tertiary interactions.

An electrochemical sensor for single nucleotide polymorphism detection in serum based on a triple-stem DNA probe

We report here an electrochemical approach that offers, for the first time, single-step, room-temperature single nucleotide polymorphism (SNP) detection directly in complex samples (such as blood serum) without the need for target modification, postwashing, or the addition of exogenous reagents. This sensor, which is sensitive, stable, and reusable, is comprised of a single, self-complementary, methylene blue-labeled DNA probe possessing a triple-stem structure. This probe takes advantage of the large thermodynamic changes in enthalpy and entropy that result from major conformational rearrangements that occur upon binding a perfectly matched target, resulting in a large-scale change in the faradaic current. As a result, the discrimination capabilities of this sensor greatly exceed those of earlier single- and double-stem electrochemical sensors and support rapid (minutes), single-step, reagentless, room-temperature detection of single nucleotide substitutions. To elucidate the theoretical basis of the sensor's selectivity, we present a comparative thermodynamic analysis among single-, double-, and triple-stem probes.