Field-flow fractionation: analysis of macromolecular, colloidal, and particulate materials

A microscale thermophoretic turbine driven by external diffusive heat flux

We propose a theoretical prototype of a micro-scale turbine externally driven by diffusive heat flux without the need for macroscopic particle flux, which is in sharp contrast to conventional turbines. The prototypes are described analytically and validated by computer simulations. Our results indicate that a micro-scale turbine composed of anisotropic blades can rotate unidirectionally in an external temperature gradient due to the anisotropic thermophoresis effect. The rotational direction and speed depend on the temperature gradient, the geometry and the thermophoretic properties of the turbine. The proposed thermophoretic turbines can be experimentally realized and implemented on micro-devices such as computer-chips to recover waste heat or to facilitate cooling.

Characterization and quantification of silver nanoparticles in nutraceuticals and beverages by asymmetric flow field flow fractionation coupled with inductively coupled plasma mass spectrometry

This study evaluated the feasibility of asymmetric flow field flow fractionation coupled with inductively coupled plasma mass spectrometry (AF4-ICP-MS) for separation, characterization and quantification of silver nanoparticles (AgNPs) in complex nutraceutical and beverage samples. For improved determination, different analysis conditions were proposed depending on the NP size, i.e. below 20 nm and in the 20-60 nm range. After optimization of the different experimental parameters affecting the AF4 separation process and the analyte detection, the proposed methods showed a wide dynamic linear range (i.e., in the 10-1000 μg L(-1)) and limits of detection below 28 ng L(-1). A previous probe ultrasonication for 90 s (corresponding to 45 pulses of 2 s) of the tested samples resulted in complete AgNPs disaggregation. As a result, a fast accurate determination was achieved (complete analysis was done in ca. 37 min). The practicality of the proposed methodology for the intended determination was demonstrated by successful determination of the AgNPs present in a variety of nutraceuticals and a beverage at concentration levels in the 0.7-29.5×10(3) μg L(-1) range. A good agreement was observed among these concentration data and those determined by more conventional sample preparation techniques, such as ultracentrifugation and acid digestion. Also, the estimated NP sizes using AF4 compared satisfactorily with those determined by image techniques, i.e. transmission electron microscopy (TEM). All together demonstrated the utility of this novel analytical methodology for the analysis of AgNPs of different size in complex matrices.

The surface properties of nanoparticles determine the agglomeration state and the size of the particles under physiological conditions

Due to the recent widespread application of nanomaterials to biological systems, a careful consideration of their physiological impact is required. This demands an understanding of the complex processes at the bio-nano interface. Therefore, a comprehensive and accurate characterization of the material under physiological conditions is crucial to correlate the observed biological impact with defined colloidal properties. As promising candidates for biomedical applications, two SiO2-based nanomaterial systems were chosen for extensive size characterization to investigate the agglomeration behavior under physiological conditions. To combine the benefits of different characterization techniques and to compensate for their respective drawbacks, transmission electron microscopy, dynamic light scattering and asymmetric flow field-flow fractionation were applied. The investigated particle systems were (i) negatively charged silica particles and (ii) poly(organosiloxane) particles offering variable surface modification opportunities (positively charged, polymer coated). It is shown that the surface properties primarily determine the agglomeration state of the particles and therefore their effective size, especially under physiological conditions. Thus, the biological identity of a nanomaterial is clearly influenced by differentiating surface properties.

Polymersome magneto-valves for reversible capture and release of nanoparticles

Stomatocytes are polymersomes with an infolded bowl-shaped architecture. This internal cavity is connected to the outside environment via a small 'mouth' region. Stomatocytes are assembled from diamagnetic amphiphilic block-copolymers with a highly anisotropic magnetic susceptibility, which permits to magnetically align and deform the polymeric self-assemblies. Here we show the reversible opening and closing of the mouth region of stomatocytes in homogeneous magnetic fields. The control over the size of the opening yields magneto-responsive supramolecular valves that are able to reversibly capture and release cargo. Furthermore, the increase in the size of the opening is gradual and starts at fields below 10 T, which opens the possibility of using these structures for delivery and nanoreactor applications.

Migration of nanoparticles from plastic packaging materials containing carbon black into foodstuffs

Carbon black was investigated to assess and quantify the possibility that nanoparticles might migrate out of plastic materials used in the food packaging industry. Two types of carbon black were incorporated in low-density polyethylene (LDPE) and polystyrene (PS) at 2.5% and 5.0% loading (w/w), and then subjected to migration studies. The samples were exposed to different food simulants according to European Union Plastics Regulation 10/2011, simulating long-term storage with aqueous and fatty foodstuffs. Asymmetric flow field-flow fractionation (AF4) coupled to a multi-angle laser light-scattering (MALLS) detector was used to separate, characterise and quantify the potential release of nanoparticles. The AF4 method was successful in differentiating carbon black from other matrix components, such as extracted polymer chains, in the migration solution. At a detection limit of 12 µg kg⁻¹, carbon black did not migrate from the packaging material into food simulants. The experimental findings are in agreement with theoretical considerations based on migration modelling. From both the experimental findings and theoretical considerations, it can be concluded that carbon black does not migrate into food once it is incorporated into a plastics food contact material.

Detection and characterization of silver nanoparticles and dissolved species of silver in culture medium and cells by AsFlFFF-UV-Vis-ICPMS: application to nanotoxicity tests

A methodology based on Asymmetric Flow Field-Flow Fractionation (AsFlFFF) coupled with UV-Vis absorption spectrometry and ICP mass spectrometry (ICPMS) has been developed and applied to the study of silver nanoparticles (AgNPs) and dissolved species of silver in culture media and cells used in cytotoxicity tests. The effect of a nano-silver based product (protein stabilized silver nanoparticles ca. 15 nm average diameter) on human hepatoma (HepG2) cell viability has been studied. UV-Vis absorption spectrometry provided information about the nature (organic vs. nanoparticle) of the eluted species, whereas the silver was monitored by ICPMS. A shift towards larger hydrodynamic diameters was observed in the AgNPs after a 24 hour incubation period in the culture medium, which suggests a "protein corona" effect. Silver(I) associated with proteins present in the culture medium has also been detected, as a consequence of the oxidation process experimented by the AgNPs. However, the Ag(I) released into the culture medium did not justify the toxicity levels observed. AgNPs associated with the cultured HepG2 cells were also identified by AsFlFFF, after applying a solubilisation process based on the use of tetramethylammonium hydroxide (TMAH) and Triton X-100. These results have been confirmed by transmission electronic microscopy (TEM) analysis of the fractions collected from the AsFlFFF. The effect of AgNPs on HepG2 cells has been compared to that caused by silver(I) as AgNO3 under the same conditions. The determination of the total content of silver in the cells confirms that a much larger mass of silver as AgNPs with respect to AgNO3 (16 to 1) is needed to observe a similar toxicity.

In situ microfluidic dialysis for biological small-angle X-ray scattering

Owing to the demand for low sample consumption and automated sample changing capabilities at synchrotron small-angle X-ray (solution) scattering (SAXS) beamlines, X-ray microfluidics is receiving continuously increasing attention. Here, a remote-controlled microfluidic device is presented for simultaneous SAXS and ultraviolet absorption measurements during protein dialysis, integrated directly on a SAXS beamline. Microfluidic dialysis can be used for monitoring structural changes in response to buffer exchange or, as demonstrated, protein concentration. By collecting X-ray data during the concentration procedure, the risk of inducing protein aggregation due to excessive concentration and storage is eliminated, resulting in reduced sample consumption and improved data quality. The proof of concept demonstrates the effect of halted or continuous flow in the microfluidic device. No sample aggregation was induced by the concentration process at the levels achieved in these experiments. Simulations of fluid dynamics and transport properties within the device strongly suggest that aggregates, and possibly even higher-order oligomers, are preferentially retained by the device, resulting in incidental sample purification. Hence, this versatile microfluidic device enables investigation of experimentally induced structural changes under dynamically controllable sample conditions.

Sedimentation field flow fractionation monitoring of in vitro enrichment in cancer stem cells by specific serum-free culture medium

The development of methods to enrich cell populations for cancer stem cells (CSC) is urgently needed to help understand tumor progression, therapeutic escape and to evaluate new drugs, in particular for colorectal cancer (CRC). In this work, we describe the in vitro use of OncoMiD for colon, a CRC-specific primary cell culture medium, to enrich CRC cell lines in CSC. Sedimentation field flow fractionation (SdFFF) was used to monitor the evolution of subpopulations composition. In these models, medium induced a loss of adherence properties associated with a balance between proliferation and apoptosis rates and, more important, an increased expression of relevant CSC markers, leading to specific SdFFF elution profile changes.

Asymmetric flow field-flow fractionation in the field of nanomedicine

Asymmetric flow field-flow fractionation (AF4) is a widely used and versatile technique in the family of field-flow fractionations, indicated by a rapidly increasing number of publications. It represents a gentle separation and characterization method, where nonspecific interactions are reduced to a minimum, allows a broad separation range from several nano- up to micrometers and enables a superior characterization of homo- and heterogenic systems. In particular, coupling to multiangle light scattering provides detailed access to sample properties. Information about molar mass, polydispersity, size, shape/conformation, or density can be obtained nearly independent of the used material. In this Perspective, the application and progress of AF4 for (bio)macromolecules and colloids, relevant for "nano" medical and pharmaceutical issues, will be presented. The characterization of different nanosized drug or gene delivery systems, e.g., polymers, nanoparticles, micelles, dendrimers, liposomes, polyplexes, and virus-like-particles (VLP), as well as therapeutic relevant proteins, antibodies, and nanoparticles for diagnostic usage will be discussed. Thereby, the variety of obtained information, the advantages and pitfalls of this emerging technique will be highlighted. Additionally, the influence of different fractionation parameters in the separation process is discussed in detail. Moreover, a comprehensive overview is given, concerning the investigated samples, fractionation parameters as membrane types and buffers used as well as the chosen detectors and the corresponding references. The perspective ends up with an outlook to the future.

Density-gradient-free microfluidic centrifugation for analytical and preparative separation of nanoparticles

Sedimentation and centrifugation techniques are widely applied for the separation of biomolecules and colloids but require the presence of controlled density gradients for stable operation. Here we present an approach for separating nanoparticles in free solution without gradients. We use microfluidics to generate a convective flow perpendicular to the sedimentation direction. We show that the hydrodynamic Rayleigh-Taylor-like instability, which, in traditional methods, requires the presence of a density gradient, can be suppressed by the Poiseuille flow in the microchannel. We illustrate the power of this approach by demonstrating the separation of mixtures of particles on the nanometer scale, orders of magnitude smaller than the micrometer-sized objects separated by conventional inertial microfluidic approaches. This technique exhibits a series of favorable features including short analysis time, small sample volume, limited dilution of the analyte, limited interactions with surfaces as well as the possibility to tune easily the separation range by adjusting the geometry of the system. These features highlight the potential of gradient-free microfluidic centrifugation as an attractive route toward a broad range of nanoscale applications.

Hyperthin nanochains composed of self-polymerizing protein shackles

Protein fibrils are expected to have applications as functional nanomaterials because of their sophisticated structures; however, nanoscale ordering of the functional units of protein fibrils remains challenging. Here we design a series of self-polymerizing protein monomers, referred to as protein shackles, derived from modified recombinant subunits of pili from Streptococcus pyogenes. The monomers polymerize into nanochains through spontaneous irreversible covalent bond formation. We design the protein shackles so that their reactions can be controlled by altering redox conditions, which affect disulphide bond formation between engineered cysteine residues. The interaction between the monomers improves their polymerization reactivity and determines morphologies of the polymers. In addition, green fluorescent protein-tagged protein shackles can polymerize, indicating proteins can be stably attached to the nanochains with its functionality preserved. Furthermore we demonstrate that a molecular-recognizable nanochain binds to its partner with an enhanced binding ability in solution. These characteristics are expected to be applied for novel protein nanomaterials.

Physicochemical characterization of nanoparticles and their behavior in the biological environment

Whilst the physical and chemical properties of nanoparticles in the gas or idealized solvent phase can nowadays be characterized with sufficient accuracy, this is no longer the case for particles in the presence of a complex biological environment.

Microfluidic electrical sorting of particles based on shape in a spiral microchannel

Shape is an intrinsic marker of cell cycle, an important factor for identifying a bioparticle, and also a useful indicator of cell state for disease diagnostics. Therefore, shape can be a specific marker in label-free particle and cell separation for various chemical and biological applications. We demonstrate in this work a continuous-flow electrical sorting of spherical and peanut-shaped particles of similar volumes in an asymmetric double-spiral microchannel. It exploits curvature-induced dielectrophoresis to focus particles to a tight stream in the first spiral without any sheath flow and subsequently displace them to shape-dependent flow paths in the second spiral without any external force. We also develop a numerical model to simulate and understand this shape-based particle sorting in spiral microchannels. The predicted particle trajectories agree qualitatively with the experimental observation.

Electrokinetic desalination using honeycomb carbon nanotubes (HC-CNTs): a conceptual study by molecular simulation

Electrokinetic desalination using honeycomb carbon nanotubes (CNTs) with high efficiency.

Kinetics of chemically mediated neurodegeneration/neuroregeneration of mouse olfactory epithelium: monitoring by hyperlayer sedimentation field flow fractionation

The increase in the incidence of neurodegenerative diseases linked to aging or injury needs to be addressed in research into neuroprotective or neuroregenerative therapies, and requires the development of specific biological models. To achieve this goal we propose (1) the use of the mouse olfactory epithelium as a biological support which specifically exhibits a regenerative or a self-renewing capacity and during the lifetime necessitates the presence of neural stem cells, and (2) the use of an intraperitoneal injection of 2,6-dichlorobenzonitrile (diclobenil) as a chemical inducer of neurodegeneration in olfactory epithelium by selectively killing mature cells. We developed a biological model to follow the processes of neurodegeneration (chemically induced) and neuroregeneration (self-renewal of olfactory epithelium). The purpose of this study was to develop a method to monitor quickly neurodegeneration/neuroregeneration processes in order to further screen protective and regenerative therapies. For this purpose, we used the sedimentation field flow fractionation elution of olfactory epithelium. We obtained specific elution profiles and retention parameters allowing the monitoring of the induction and kinetics of biological processes. The use of insulin-like growth factor 1α as a neuroprotective agent in an innovative nebulization protocol showed sedimentation field flow fractionation to be a simple, fast and low-cost method to monitor such a biological event on the scale of an entire organism.

An electrorotation technique for measuring the dielectric properties of cells with simultaneous use of negative quadrupolar dielectrophoresis and electrorotation

This paper presents an effective electrorotation technique for measuring the dielectric properties of cells using a superposed electrical signal, which can simultaneously generate negative quadrupolar dielectrophoretic (nQDEP) force and electrorotational (ROT) torque. The proposed technique involves a three-dimensional (3D) octode, which includes four electrodes arranged in a crisscross pattern on the top and bottom of a microchannel, respectively. A single cell was trapped in the center of the 3D octode by the nQDEP force and simultaneously rotated by the ROT torque. Using the proposed electrorotation technique, ROT spectra of human leukocyte subpopulations (T and B lymphocytes, granulocytes, and monocytes) and metastatic human breast (SkBr3) and lung (A549) cancer cell lines were accurately measured without any disturbance. Torque on the cells generated by the ROT signal was analyzed theoretically based on the single-shell dielectric model for the cells. Furthermore, the dielectric properties of the cells, such as area-specific membrane capacitance and cytoplasm conductivity, were extracted using the measured ROT spectra and the analyzed torque.

Multiplex particle focusing via hydrodynamic force in viscoelastic fluids

We introduce a multiplex particle focusing phenomenon that arises from the hydrodynamic interaction between the viscoelastic force and the Dean drag force in a microfluidic device. In a confined microchannel, the first normal stress difference of viscoelastic fluids results in a lateral migration of suspended particles. Such a viscoelastic force was harnessed to focus different sized particles in the middle of a microchannel, and spiral channel geometry was also considered in order to take advantage of the counteracting force, Dean drag force that induces particle migration in the outward direction. For theoretical understanding, we performed a numerical analysis of viscoelastic fluids in the spiral microfluidic channel. From these results, a concept of the ‘Dean-coupled Elasto-inertial Focusing band (DEF)' was proposed. This study provides in-depth physical insight into the multiplex focusing of particles that can open a new venue for microfluidic particle dynamics for a concrete high throughput platform at microscale.

Single polymer gating of channels under a solvent gradient

We study the effect of a gradient of solvent quality on the coil-globule transition for a polymer in a narrow pore. A simple self-attracting, self-avoiding walk model of a polymer in solution shows that the variation in the strength of the interaction across the pore leads the system to go from one regime (good solvent) to the other (poor solvent) across the channel. This may be thought to be analogous to thermophoresis, where the polymer goes from the hot region to the cold region under the temperature gradient. The behavior of short chains is studied using exact enumeration while the behavior of long chains is studied using transfer matrix techniques. The distribution of the monomer density across the layer suggests that a gatelike effect can be created, with potential applications as a sensor.

Distinguishing dissolved organic matter at its origin: size and optical properties of leaf-litter leachates

Dissolved organic matter (DOM) was leached from eight distinct samples of leaves taken from six distinct trees (red maple, bur oak at three times of the year, two sugar maple and two white spruce trees from disparate soil types). Multiple samples were taken over 72-96h of leaching. The size and optical properties of leachates were assessed using asymmetrical flow field-flow fractionation (AF4) coupled to diode-array ultraviolet/visible absorbance and excitation-emission matrix fluorescence detectors (EEM). The fluorescence of unfractionated samples was also analyzed. EEMs were analyzed using parallel factor analysis (PARAFAC) and principal component analysis (PCA) of proportional component loadings. Both the unfractionated and AF4-fractionated leachates had distinct size and optical properties. The 95% confidence ranges for molecular weight distributions were determined as: 210-440Da for spruce, 540-920Da for sugar maple, 630-800Da for spring oak leaves, 930-950Da for senescent oak, 1490-1670 for senescent red maple, and 3430-4270Da for oak leaves that were collected from the ground after spring thaw. In most cases the fluorescence properties of leachates were different for individuals from different soil types and across seasons; however, PCA of PARAFAC loadings revealed that the observed distinctiveness was chiefly species-based. Strong correlations were found between the molecular weight distribution of both unfractionated and fractionated leachates and their principal component loadings (R(2)=0.85 and 0.95, respectively). It is concluded that results support a species-based origin for differences in optical properties.

Dissociation-based screening of nanoparticle-protein interaction via flow field-flow fractionation

A protein corona will be formed on nanoparticles (NPs) entering a biological matrix, which can influence particles' subsequent behaviors inside the biological systems. For proteins bound stably to the NPs, they can exhibit different association/dissociation rates. The binding kinetics could affect interaction of the NPs with cell surface receptors and possibly contribute to the outcomes of NPs uptake. In the present study, a method to differentiate the corona proteins based on their relative dissociation rates from the NPs was developed, employing flow field-flow fraction (F4) in combination with centrifugation. The proteins bound to the superparamagnetic iron oxide NPs (SPION) present in an IgG/albumin depleted serum were isolated via collection of the SPIONs by either F4 or centrifugation. They were subsequently analyzed by LC-MS/MS and identified. Because the SPION-protein complexes injected to F4 dissociated continuously under the nonequilibrium separation condition, only the proteins with slow enough dissociation rates would be collected with the NPs in the eluent of F4. However, in centrifugation, proteins with good affinity to the SPIONs were collected regardless of the dissociation rates of the complexes. In both cases, the nonbinding ones were washed off. Capillary electrophoresis and circular dichroism were employed to verify the binding situations of a few SPION-protein interactions, confirming the effectiveness of our method. Our results support that our method can screen for proteins binding to NPs with fast on-and-off rates, which should be the ones quickly exchanging with the free matrix proteins when the NPs are exposed to a new biological media. Thus, our method will be useful for investigation of the temporal profile of protein corona and its evolution in biological matrices as well as for high-throughput analysis of the dynamic feature of protein corona related to particle properties.

Quantitation of influenza virus using field flow fractionation and multi-angle light scattering for quantifying influenza A particles

Recent advances in instrumentation and data analysis in field flow fractionation and multi-angle light scattering (FFF-MALS) have enabled greater use of this technique to characterize and quantitate viruses. In this study, the FFF-MALS technique was applied to the characterization and quantitation of type A influenza virus particles to assess its usefulness for vaccine preparation. The use of FFF-MALS for quantitation and measurement of control particles provided data accurate to within 5% of known values, reproducible with a coefficient of variation of 1.9%. The methods, sensitivity and limit of detection were established by analyzing different volumes of purified virus, which produced a linear regression with fitting value R2 of 0.99. FFF-MALS was further applied to detect and quantitate influenza virus in the supernatant of infected MDCK cells and allantoic fluids of infected eggs. FFF fractograms of the virus present in these different fluids revealed similar distribution of monomeric and oligomeric virions. However, the monomer fraction of cell grown virus had greater size variety. Notably, β-propialactone (BPL) inactivation of influenza viruses did not influence any of the FFF-MALS measurements. Quantitation analysis by FFF-MALS was compared to infectivity assays and real-time RT-PCR (qRT-PCR) and the limitations of each assay were discussed.

Brownian motion in inhomogeneous suspensions

The Langevin description of Brownian motion in inhomogeneous suspensions is here revisited. Inhomogeneous suspensions are characterized by a position-dependent friction coefficient, which can significantly influence the dynamics of the suspended particles. Outstanding examples are suspensions in confinement or in the presence of a temperature gradient. The Langevin approach in inhomogeneous systems encounters a fundamental difficulty related to the interpretation of the multiplicative noise induced by the position-dependent friction. We show that the so-called Ito-Stratonovich dilemma is originated by the violation of the macroscopic force balance condition in the traditional procedure of eliminating the fast variables. Repairing this deficit, we rederive the extended overdamped Langevin equation directly from the infradamped Langevin equation. This is without invoking the Fokker-Planck formalism, such that the self-completeness of the Langevin framework is restored. Furthermore, we derive the generalized forms of the drift-force relation and the Smoluchowski equation for inhomogeneous suspensions in a straightforward manner.