Craniofacial tissue engineering by stem cells

Dental implants placed into alveolar clefts reconstructed with tongue flaps and bone grafts

OBJECTIVE

The aim of this study was to describe a case series using surgical and prosthodontic modifications of tongue flaps necessary to adapt them for use in the reconstruction of large cleft deformities refractory to customary measures using dental implants and to study their outcomes in patients with complex cleft lip and palate deformities.

STUDY DESIGN

Five patients were treated with iliac crest bone grafts and covered by anteriorly based tongue flaps divided at either 3 or 4 weeks after surgery. The patients were followed clinically and radiographically for 3-12 years after placement of their dental implants to monitor implant survival and success.

RESULTS

One of the 5 patients suffered a partial tongue flap detachment, graft dehiscence, and recurrence of an oronasal fistula, which was successfully treated by shifting the tongue flap tissue from its new location in the palate. A total of 18 dental implants were placed into bone-grafted tissue covered by the tongue flaps. There was 1 implant failure. There were no cases of periimplantitis or bone loss in the 17 surviving implants.

CONCLUSIONS

Tongue flaps are rarely used clinical entities with a very narrow range of indications. Tongue flaps are useful in the preprosthetic reconstruction of select cases with large residual oronasal fistulae with soft tissue deficits due to scarring from previously failed surgery. Tongue flaps are extremely stressful procedures for patients to endure. Patient selection is of the utmost importance.

Human umbilical cord stem cell encapsulation in calcium phosphate scaffolds for bone engineering

Human bone marrow mesenchymal stem cells (hBMSCs) require an invasive procedure to harvest, and have lower self-renewal potential with aging. Umbilical cord mesenchymal stem cells (hUCMSCs) are a relatively new stem cell source; this study reveals a self-setting and load-bearing calcium phosphate construct that encapsulates these stem cells. The flexural strength (mean+/-sd; n=5) of the hUCMSC-encapsulating calcium phosphate cement (CPC) increased from (3.5+/-1.1) MPa without polyglactin fibers, to (11.7+/-2.1) MPa with 20% of polyglactin fibers (p<0.05). hUCMSCs attached to the bone mineral-mimicking scaffold in the osteogenic media and differentiated down the osteogenic lineage, yielding elevated alkaline phosphatase (ALP) and osteocalcin (OC) gene expressions. ALP and OC on the CPC-fiber scaffold was 2-fold those on CPC control without fibers. hUCMSCs encapsulated inside the scaffolds retained excellent viability and cell density. The encapsulated hUCMSCs inside four different constructs successfully differentiated down the osteogenic lineage and synthesized bone minerals, as confirmed by mineral staining, SEM, and XRD. The percentage of mineral area synthesized by the encapsulated hUCMSCs increased from about 3% at day-7, to 12% at day-21 (p<0.05). In conclusion, this study demonstrated that hUCMSCs encapsulated in the bioengineered scaffolds osteo-differentiated and synthesized bone minerals. The self-setting CPC-chitosan-fiber scaffold supported the viability and osteogenic differentiation of the encapsulated hUCMSCs, and had mechanical strength matching that of cancellous bone.

Efficacy of membranous cultured periosteum for the treatment of patients with severe periodontitis: a proof-of-concept study

Osteogenic cells have been found within periosteal tissue. Periosteal cells will also form a membranous structure under the appropriate culture conditions. We have characterized the osteogenic potential of this membranous cultured periosteum (CP) and have demonstrated that CP can successfully regenerate alveolar bone defects in a canine periodontitis model. The aim of this study is to demonstrate periodontal tissue regeneration by using CP for patients with severe periodontitis. CP was applied in treatments for severe alveolar bone defects for a total of seven teeth among four periodontitis patients. Bone formation was evaluated by dental radiography 4 months after grafting, with a follow-up period of 12 to 15 months. CP was successfully generated and formed a membrane (approximately 4 cm in diameter) about 4 weeks after attachment to the dish. Vertical bone gain (3 to 8 mm) was observed in all grafted areas at 4 months post-surgery. The probing depth was also reduced to its normal depth and remained so beyond one year. Results from the present cases suggest that periodontitis patients with bone defects can benefit from CP treatment. Post-operative evaluation indicates periodontal tissue regeneration after CP treatment, suggesting a broad application for patients with periodontal disease.

Formation of the tooth-bone interface

Not only are teeth essential for mastication, but also missing teeth are considered a social handicap due to speech and aesthetic problems, with a resulting high impact on emotional well-being. Several treatment procedures are currently available for tooth replacement with mostly inert prosthetic materials and implants. Natural tooth substitution based on copying the developmental process of tooth formation is particularly challenging and creates a rapidly developing area of molecular dentistry. In any approach, functional interactions among the tooth, the surrounding bone, and the periodontium must be established. Therefore, recent research in craniofacial genetics searches for mechanisms responsible for correct cell and tissue interactions, not only within a specific structure, but also in the context of supporting structures. A tooth crown that is not functionally anchored to roots and bone is useless. This review aims to summarize the developmental and tissue homeostatic aspects of the tooth-bone interface, from the initial patterning toward tooth eruption and lifelong interactions between the tooth and its surrounding alveolar bone.

Apc inhibition of Wnt signaling regulates supernumerary tooth formation during embryogenesis and throughout adulthood

The ablation of Apc function or the constitutive activation of beta-catenin in embryonic mouse oral epithelium results in supernumerary tooth formation, but the underlying mechanisms and whether adult tissues retain this potential are unknown. Here we show that supernumerary teeth can form from multiple regions of the jaw and that they are properly mineralized, vascularized, innervated and can start to form roots. Even adult dental tissues can form new teeth in response to either epithelial Apc loss-of-function or beta-catenin activation, and the effect of Apc deficiency is mediated by beta-catenin. The formation of supernumerary teeth via Apc loss-of-function is non-cell-autonomous. A small number of Apc-deficient cells is sufficient to induce surrounding wild-type epithelial and mesenchymal cells to participate in the formation of new teeth. Strikingly, Msx1, which is necessary for endogenous tooth development, is dispensable for supernumerary tooth formation. In addition, we identify Fgf8, a known tooth initiation marker, as a direct target of Wnt/beta-catenin signaling. These studies identify key mechanistic features responsible for supernumerary tooth formation.

Engineering craniofacial structures: facing the challenge

The human innate regenerative ability is known to be limited by the intensity of the insult together with the availability of progenitor cells, which may cause certain irreparable damage. It is only recently that the paradigm of tissue engineering found its way to the treatment of irreversibly affected body structures with the challenge of reconstructing the lost part. In the current review, we underline recent trials that target engineering of human craniofacial structures, mainly bone, cartilage, and teeth. We analyze the applied engineering strategies relative to the selection of cell types to lay down a specific targeted tissue, together with their association with an escorting scaffold for a particular engineered site, and discuss their necessity to be sustained by growth factors. Challenges and expectations for facial skeletal engineering are discussed in the context of future treatment.

Fatigue and human umbilical cord stem cell seeding characteristics of calcium phosphate-chitosan-biodegradable fiber scaffolds

Calcium phosphate cement (CPC) has in situ-setting ability and bioactivity, but the brittleness and low strength limit CPC to only non-load-bearing bone repairs. Human umbilical cord mesenchymal stem cells (hUCMSCs) can be harvested without an invasive procedure required for the commonly studied bone marrow MSCs. However, little has been reported on hUCMSC delivery via bioactive scaffolds for bone tissue engineering. The objectives of this study were to develop CPC scaffolds with improved resistance to fatigue and fracture, and to investigate hUCMSC delivery for bone tissue engineering. In fast fracture, CPC with 15% chitosan and 20% polyglactin fibers (CPC-chitosan-fiber scaffold) had flexural strength of 26mPa, higher than 10mPa for CPC control (p<0.05). In cyclic loading, CPC-chitosan-fiber specimens that survived 2x10(6) cycles had the maximum stress of 10MPa, compared to 5MPa of CPC control. CPC-chitosan-fiber specimens that failed after multiple cycles had a mean stress-to-failure of 9MPa, compared to 5.8MPa for CPC control (p<0.05). hUCMSCs showed excellent viability when seeded on CPC and CPC-chitosan-fiber scaffolds. The percentage of live cells reached 96-99%. Cell density was about 300cells/mm(2) at day 1; it proliferated to 700cells/mm(2) at day 4. Wst-1 assay showed that the stronger CPC-chitosan-fiber scaffold had hUCMSC viability that matched the CPC control (p>0.1). In summary, this study showed that chitosan and polyglactin fibers substantially increased the fatigue resistance of CPC, and that hUCMSCs had excellent proliferation and viability on the scaffolds.

Engineering anatomically shaped human bone grafts

The ability to engineer anatomically correct pieces of viable and functional human bone would have tremendous potential for bone reconstructions after congenital defects, cancer resections, and trauma. We report that clinically sized, anatomically shaped, viable human bone grafts can be engineered by using human mesenchymal stem cells (hMSCs) and a "biomimetic" scaffold-bioreactor system. We selected the temporomandibular joint (TMJ) condylar bone as our tissue model, because of its clinical importance and the challenges associated with its complex shape. Anatomically shaped scaffolds were generated from fully decellularized trabecular bone by using digitized clinical images, seeded with hMSCs, and cultured with interstitial flow of culture medium. A bioreactor with a chamber in the exact shape of a human TMJ was designed for controllable perfusion throughout the engineered construct. By 5 weeks of cultivation, tissue growth was evidenced by the formation of confluent layers of lamellar bone (by scanning electron microscopy), markedly increased volume of mineralized matrix (by quantitative microcomputer tomography), and the formation of osteoids (histologically). Within bone grafts of this size and complexity cells were fully viable at a physiologic density, likely an important factor of graft function. Moreover, the density and architecture of bone matrix correlated with the intensity and pattern of the interstitial flow, as determined in experimental and modeling studies. This approach has potential to overcome a critical hurdle-in vitro cultivation of viable bone grafts of complex geometries-to provide patient-specific bone grafts for craniofacial and orthopedic reconstructions.

Injectable biomaterials for regenerating complex craniofacial tissues

Engineering complex tissues requires a precisely formulated combination of cells, spatiotemporally released bioactive factors, and a specialized scaffold support system. Injectable materials, particularly those delivered in aqueous solution, are considered ideal delivery vehicles for cells and bioactive factors and can also be delivered through minimally invasive methods and fill complex 3D shapes. In this review, we examine injectable materials that form scaffolds or networks capable of both replacing tissue function early after delivery and supporting tissue regeneration over a time period of weeks to months. The use of these materials for tissue engineering within the craniofacial complex is challenging but ideal as many highly specialized and functional tissues reside within a small volume in the craniofacial structures and the need for minimally invasive interventions is desirable due to aesthetic considerations. Current biomaterials and strategies used to treat craniofacial defects are examined, followed by a review of craniofacial tissue engineering, and finally an examination of current technologies used for injectable scaffold development and drug and cell delivery using these materials.

Recombinant adeno-associated virus serotype 2 (rAAV2)-An efficient vector for gene delivery in condylar cartilage, glenoid fossa and TMJ disc in an experimental study in vivo

OBJECTIVE

To elaborate whether rAAV2 can be used for future TMJ gene therapy, we examined the infection efficiencies of rAAV2 in vitro, and the transgene expression pattern mediated by rAAV2 in glenoid fossa, TMJ disc and condylar cartilage in vivo.

MATERIALS AND METHODS

Different dosages of rAAV2-eGFP (MOI: 5 x 10(4), 1 x 10(4), 5 x 10(3)) were applied to primary cultured condylar chondrocytes of rats. Infection efficiencies were analysed by FACSCalitur at different time points. Vastatin, a molecule not naturally expressed in TMJ, was used as a reporter for detection of rAAV2 mediated transgene expression in vivo. Thirty SD rats were injected with either rAAV2-sec-Vastatin (experimental group) or rAAV2-eGFP (control group) into both sides of TMJ. They were sacrificed at the indicated time (7, 14, 21, 30 and 60 days of injection) and the TMJ samples were collected for RT-PCR and immunostaining analysis.

RESULTS

High dosage (MOI 5 x 10(4)) of rAAV2-eGFP can achieve desirable transduction efficiencies in vitro after 5 days. Transgene expression of rAAV-sec-Vastatin persisted for about 21 days in glenoid fossa, around 7 days in TMJ disc and at least 60 days in condylar cartilage in vivo. In condylar cartilage, transgene expression was found in the proliferative layer and chondroblast layer (day 7), chondrocyte layer (day 14), pre-hypertrophic and hypertrophic layer (day 21), hypertrophic layer and deep hypertrophic layer (day 30 and 60).

CONCLUSION

Recombinant AAV2 could be considered as a promising vector for gene therapy in TMJ which can mediate therapeutic gene expression in glenoid fossa, articular disc and condylar cartilage in vivo.

Human dental pulp stem cells: from biology to clinical applications

Dental pulp stem cells (DPSCs) can be found within the "cell rich zone" of dental pulp. Their embryonic origin, from neural crests, explains their multipotency. Up to now, two groups have studied these cells extensively, albeit with different results. One group claims that these cells produce a "dentin-like tissue", whereas the other research group has demonstrated that these cells are capable of producing bone, both in vitro and in vivo. In addition, it has been reported that these cells can be easily cryopreserved and stored for long periods of time and still retain their multipotency and bone-producing capacity. Moreover, recent attention has been focused on tissue engineering and on the properties of these cells: several scaffolds have been used to promote 3-D tissue formation and studies have demonstrated that DPSCs show good adherence and bone tissue formation on microconcavity surface textures. In addition, adult bone tissue with good vascularization has been obtained in grafts. These results enforce the notion that DPSCs can be used successfully for tissue engineering.

Crown formation during tooth development and tissue engineering

Considering tooth crown engineering, three main parameters have to be taken into account: (1) the relationship between crown morphology and tooth functionality, (2) the growth of the organ, which is hardly compatible with the use of preformed scaffolds, and (3) the need for easily available nondental competent cell sources. In vitro reassociation experiments using either dental tissues or bone marrow-derived cells (BMDC) have been designed to get information about the mechanisms to be preserved in order to allow crown engineering. As the primary enamel knot (PEK) is involved in signaling crown morphogenesis, the formation and fate of this structure was investigated (1) in heterotopic reassociations between embryonic day 14 (ED14) incisor and molar enamel organs and mesenchymes, and (2) in reassociations between ED14 molar enamel organs and BMDC. A PEK formed in cultured heterotopic dental tissue reassociations. The mesenchyme controls the fate of the EK cells, incisor or molar-specific using apoptosis as criterion, and functionality to drive single/multiple cusps tooth development. Although previous investigations showed that they might differentiate as odontoblast- or ameloblast-like cells, BMDC reassociated to an enamel organ could not support the development of multicusp teeth. These cells apparently could neither maintain nor stimulate the formation of a PEK.

Stem cells from deciduous tooth repair mandibular defect in swine

Stem cells from human exfoliated deciduous teeth have been identified as a new post-natal stem cell population with multipotential differentiation capabilities, including regeneration of mineralized tissues in vivo. To examine the efficacy of utilizing these stem cells in regenerating orofacial bone defects, we isolated stem cells from miniature pig deciduous teeth and engrafted the critical-size bone defects generated in swine mandible models. Our results indicated that stem cells from miniature pig deciduous teeth, an autologous and easily accessible stem cell source, were able to engraft and regenerate bone to repair critical-size mandibular defects at 6 months post-surgical reconstruction. This pre-clinical study in a large-animal model, specifically swine, allows for testing of a stem cells/scaffold construct in the restoration of orofacial skeletal defects and provides rapid translation of stem-cell-based therapy in orofacial reconstruction in human clinical trials.

Tissue engineering: state of the art in oral rehabilitation

More than 85% of the global population requires repair or replacement of a craniofacial structure. These defects range from simple tooth decay to radical oncologic craniofacial resection. Regeneration of oral and craniofacial tissues presents a formidable challenge that requires synthesis of basic science, clinical science and engineering technology. Identification of appropriate scaffolds, cell sources and spatial and temporal signals (the tissue engineering triad) is necessary to optimize development of a single tissue, hybrid organ or interface. Furthermore, combining the understanding of the interactions between molecules of the extracellular matrix and attached cells with an understanding of the gene expression needed to induce differentiation and tissue growth will provide the design basis for translating basic science into rationally developed components of this tissue engineering triad. Dental tissue engineers are interested in regeneration of teeth, oral mucosa, salivary glands, bone and periodontium. Many of these oral structures are hybrid tissues. For example, engineering the periodontium requires growth of alveolar bone, cementum and the periodontal ligament. Recapitulation of biological development of hybrid tissues and interfaces presents a challenge that exceeds that of engineering just a single tissue. Advances made in dental interface engineering will allow these tissues to serve as model systems for engineering other tissues or organs of the body. This review will begin by covering basic tissue engineering principles and strategic design of functional biomaterials. We will then explore the impact of biomaterials design on the status of craniofacial tissue engineering and current challenges and opportunities in dental tissue engineering.

Isolation of osteogenic progenitors from human amniotic fluid using a single step culture protocol

BACKGROUND

Stem cells isolated from amniotic fluid are known to be able to differentiate into different cells types, being thus considered as a potential tool for cellular therapy of different human diseases. In the present study, we report a novel single step protocol for the osteoblastic differentiation of human amniotic fluid cells.

RESULTS

The described protocol is able to provide osteoblastic cells producing nodules of calcium mineralization within 18 days from withdrawal of amniotic fluid samples. These cells display a complete expression of osteogenic markers (COL1, ONC, OPN, OCN, OPG, BSP, Runx2) within 30 days from withdrawal. In order to test the ability of these cells to proliferate on surfaces commonly used in oral osteointegrated implantology, we carried out cultures onto different test disks, namely smooth copper, machined titanium and Sandblasted and Acid Etching titanium (SLA titanium). Electron microscopy analysis evidenced the best cell growth on this latter surface.

CONCLUSION

The described protocol provides an efficient and time-saving tool for the production of osteogenic cells from amniotic fluid that in the future could be used in oral osteointegrated implantology.

Mesenchymal stem cell proliferation and differentiation on an injectable calcium phosphate-chitosan composite scaffold

Calcium phosphate cement (CPC) can be molded or injected to form a scaffold in situ, has excellent osteoconductivity, and can be resorbed and replaced by new bone. However, its low strength limits CPC to non-stress-bearing repairs. Chitosan could be used to reinforce CPC, but mesenchymal stem cell (MSC) interactions with CPC-chitosan scaffold have not been examined. The objective of this study was to investigate MSC proliferation and osteogenic differentiation on high-strength CPC-chitosan scaffold. MSCs were harvested from rat bone marrow. At CPC powder/liquid (P/L) mass ratio of 2, flexural strength (mean+/-sd; n=5) was (10.0+/-1.1) MPa for CPC-chitosan, higher than (3.7+/-0.6) MPa for CPC (p<0.05). At P/L of 3, strength was (15.7+/-1.7)MPa for CPC-chitosan, higher than (10.2+/-1.8)MPa for CPC (p<0.05). Percentage of live MSCs attaching to scaffolds increased from 85% at 1 day to 99% at 14 days. There were (180+/-37) cells/mm(2) on scaffold at 1 day; cells proliferated to (1808+/-317) cells/mm(2) at 14 days. SEM showed MSCs with healthy spreading and anchored on nano-apatite crystals via cytoplasmic processes. Alkaline phosphatase activity (ALP) was (557+/-171) (pNPP mM/min)/(microg DNA) for MSCs on CPC-chitosan, higher than (159+/-47) on CPC (p<0.05). Both were higher than (35+/-32) of baseline ALP for undifferentiated MSCs on tissue-culture plastic (p<0.05). In summary, CPC-chitosan scaffold had higher strength than CPC. MSC proliferation on CPC-chitosan matched that of the FDA-approved CPC control. MSCs on the scaffolds differentiated down the osteogenic lineage and expressed high levels of bone marker ALP. Hence, the stronger CPC-chitosan scaffold may be useful for stem cell-based bone regeneration in moderate load-bearing maxillofacial and orthopedic applications.

Evaluation criteria for musculoskeletal and craniofacial tissue engineering constructs: a conference report

Over the past 20 years, tissue engineering (TE) has evolved into a thriving research and commercial development field. However, applying TE strategies to musculoskeletal (MSK) and craniofacial tissues has been particularly challenging since these tissues must also transmit loads during activities of daily living. To address this need, organizers invited a small group of bioengineers, surgeons, biologists, and material scientists from academia, industry, and government to participate in a two and half-day conference to develop general and tissue-specific criteria for evaluating new concepts and tissue-engineered constructs, including threshold values of success. Participants were assigned to four breakout groups representing commonly injured tissues, including tendon and ligament, articular cartilage, meniscus and temporomandibular joint, and bone and intervertebral disc. Working in multidisciplinary teams, participants first carefully defined one or two important unmet clinical needs for each tissue type, including current standards of care and the potential impact of TE solutions. The groups then sought to identify important parameters for evaluating repair outcomes in preclinical studies and to specify minimally acceptable values for these parameters. The importance of in vitro TE studies was then discussed in the context of these preclinical studies. Where data were not currently available from clinical, preclinical, or culture studies, the groups sought to identify important areas of preclinical research needed to speed the development process. This report summarizes the findings of the conference.

Dental pulp stem cells: a promising tool for bone regeneration

Human tissues are different in term of regenerative properties. Stem cells are a promising tool for tissue regeneration, thanks to their particular characteristics of proliferation, differentiation and plasticity. Several "loci" or "niches" within the adult human body are colonized by a significant number of stem cells. However, access to these potential collection sites often is a limiting point. The interaction with biomaterials is a further point that needs to be considered for the therapeutic use of stem cells. Dental pulp stem cells (DPSCs) have been demonstrated to answer all of these issues: access to the collection site of these cells is easy and produces very low morbidity; extraction of stem cells from pulp tissue is highly efficiency; they have an extensive differentiation ability; and the demonstrated interactivity with biomaterials makes them ideal for tissue reconstruction. SBP-DPSCs are a multipotent stem cell subpopulation of DPSCs which are able to differentiate into osteoblasts, synthesizing 3D woven bone tissue chips in vitro and that are capable to synergically differentiate into osteoblasts and endotheliocytes. Several studied have been performed on DPSCs and they mainly found that these cells are multipotent stromal cells that can be safety cryopreserved, used with several scaffolds, that can extensively proliferate, have a long lifespan and build in vivo an adult bone with Havers channels and an appropriate vascularization. A definitive proof of their ability to produce dentin has not been yet done. Interestingly, they seem to possess immunoprivileges as they can be grafted into allogenic tissues and seem to exert anti-inflammatory abilities, like many other mesenchymal stem cells. The easy management of dental pulp stem cells make them feasible for use in clinical trials on human patients.

Tooth agenesis: from molecular genetics to molecular dentistry

Tooth agenesis may originate from either genetic or environmental factors. Genetically determined hypodontic disorders appear as isolated features or as part of a syndrome. Msx1, Pax9, and Axin2 are involved in non-syndromic hypodontia, while genes such as Shh, Pitx2, Irf6, and p63 are considered to participate in syndromic genetic disorders, which include tooth agenesis. In dentistry, artificial tooth implants represent a common solution to tooth loss problems; however, molecular dentistry offers promising solutions for the future. In this paper, the genetic and molecular bases of non-syndromic and syndromic hypodontia are reviewed, and the advantages and disadvantages of tissue engineering in the clinical treatment of tooth agenesis are discussed.

TMJ disorders: future innovations in diagnostics and therapeutics

Because their etiologies and pathogenesis are poorly understood, temporomandibular joint (TMJ) diseases are difficult to diagnose and manage. All current approaches to treatments of TMJ diseases are largely palliative. Definitive and rational diagnoses or treatments can only be achieved through a comprehensive understanding of the etiologies, predisposing factors, and pathogenesis of TMJ diseases. While much work remains to be done in this field, novel findings in biomedicine and developments in imaging and computer technologies are beginning to provide us with a vision of future innovations in the diagnostics and therapeutics of TMJ disorders. These advances include the identification and use of local or systemic biomarkers to diagnose disease or monitor improvements in therapy; the use of imaging technologies for earlier and more sensitive diagnostics; and the use of biomedicine, biomimetics, and imaging to design and manufacture bioengineered joints. Such advances are likely to help to customize and enhance the quality of care we provide to patients with TMJ disorders.

Mesenchymal stem cells and platelet-rich plasma enhance bone formation in sinus grafting: a histomorphometric study in minipigs

OBJECTIVES

Autologous, allogenic, and alloplastic materials for sinus augmentation have specific drawbacks, which has stimulated an ongoing search for new materials and tissue-engineering constructs. We investigated whether mesenchymal stem cells (MSCs) and platelet-rich plasma (PRP) seeded on a fluorohydroxyapatite (FH) scaffold can improve bone formation and bone-to-implant contact (BIC) in maxillary sinus grafting.

MATERIAL AND METHODS

Bilateral sinus augmentation procedures were performed in eight minipigs. MSCs, PRP, and FH scaffold (test site) or FH alone (control site) were grafted in each maxillary sinus. Distal to the osteotomy, one dental implant per sinus was placed in the grafting material through the facial sinus wall. The animals were killed 3 months after grafting, and block sections of the implant sites were harvested and prepared for histomorphometric analysis.

RESULTS

After 12 weeks, a significant increase in bone formation occurred in the test sites compared with the control sites (42.51%versus 18.98%; p=0.001). In addition, BIC was significantly greater in the test sites compared with the control sites in the regenerated area (23.71%versus 6.63%; p=0.028).

CONCLUSIONS

These findings show that sinus augmentation with MSCs-PRP, combined with FH may enhance bone formation and osseointegration of dental implants compared with FH alone in minipigs.

Engineering custom-designed osteochondral tissue grafts

Tissue engineering is expected to help us outlive the failure of our organs by enabling the creation of tissue substitutes capable of fully restoring the original tissue function. Degenerative joint disease, which affects one-fifth of the US population and is the country's leading cause of disability, drives current research of actively growing, functional tissue grafts for joint repair. Toward this goal, living cells are used in conjunction with biomaterial scaffolds (serving as instructive templates for tissue development) and bioreactors (providing environmental control and molecular and physical regulatory signals). In this review, we discuss the requirements for engineering customized, anatomically-shaped, stratified grafts for joint repair and the challenges of designing these grafts to provide immediate functionality (load bearing, structural support) and long-term regeneration (maturation, integration, remodeling).

Systemically transplanted bone marrow stromal cells contributing to bone tissue regeneration

Bone marrow stromal cells (BMSCs) are a rich source of osteogenic progenitor cells. A fundamental question is whether systemically transplanted BMSCs participate in bone regeneration. Luciferase and GFP double-labeled BMSCs were transplanted into irradiated mice. Five weeks after transplantation, artificial bone wounds were created in the mandibles and calvaria of the recipients. Animals were sacrificed at weeks 2, 4, and 6 after surgery and the expressions of luciferase and GFP were determined using Xenogen IVIS Imaging System, immunohistochemical staining and RT-PCR. The results demonstrated that transplanted BMSCs can be detected in wound sites as early as 2 weeks and lasted the whole experimental period. Luciferase expression peaked at 2 weeks after surgery and decreased thereafter, exhibiting a similar expression pattern as that of BSP, while GFP expression was relatively stable during the experimental period. In conclusion, BMSCs can migrate to bone wound sites and participate in bone regeneration in orocraniofacial region.

Autologous stem cell regeneration in craniosynostosis

Craniosynostosis occurs in one of 2500 live human births and may manifest as craniofacial disfiguration, seizure, and blindness. Craniotomy is performed to reshape skull bones and resect synostosed cranial sutures. We demonstrate for the first time that autologous mesenchymal stem cells (MSCs) and controlled-released TGFbeta3 reduced surgical trauma to localized osteotomy and minimized osteogenesis in a rat craniosynostosis model. Approximately 0.5 mL tibial marrow content was aspirated to isolate mononucleated and adherent cells that were characterized as MSCs. Upon resecting the synostosed suture, autologous MSCs in collagen carriers with microencapsulated TGFbeta3 (1 ng/mL) generated cranial suture analogs characterized as bone-soft tissue-bone interface by quantitative histomorphometric and microCT analyses. Thus, surgical trauma in craniosynostosis can be minimized by a biologically viable implant. We speculate that proportionally larger amounts of human marrow aspirates participate in the healing of craniosynostosis defects in patients. The engineered soft tissue-bone interface may have implications in the repair of tendons, ligaments, periosteum and periodontal ligament.

Characterisation of human dental stem cells and buccal mucosa fibroblasts

Human craniofacial stem cells are recently discovered sources of putative mesenchymal stem cells that hold great promise for autogenic or allogenic cell therapy and tissue engineering. Prior to employing these cells in clinical applications, they must be thoroughly investigated and characterized. In this study, the surface marker expression was investigated on dental pulp stem cells (DPSCs), dental follicle cells (DFCs), periodontal ligament stem cells (PDLSCs), and buccal mucosa fibroblasts (BMFs) utilising surface markers for flow cytometry. The osteogenic potential was also examined by bone-associated markers alkaline phosphatase, Runx2, collagen type I, osteocalcin, and osteopontin. The results from our study demonstrate that the dental cell sources exhibit comparable surface marker and bone-associated marker profiles parallel to those of other mesenchymal stem cell sources, yet distinct from the buccal mucosa fibroblasts. Our data support evidence towards clinical applicability of dental stem cells in hard tissue regeneration.

Vascularized adipose tissue grafts from human mesenchymal stem cells with bioactive cues and microchannel conduits

Vascularization is critical to the survival of engineered tissues. This study combined biophysical and bioactive approaches to induce neovascularization in vivo. Further, we tested the effects of engineered vascularization on adipose tissue grafts. Hydrogel cylinders were fabricated from poly(ethylene glycol) diacrylate (PEG) in four configurations: PEG alone, PEG with basic fibroblast growth factor (bFGF), microchanneled PEG, or both bFGF-adsorbed and microchanneled PEG. In vivo implantation revealed no neovascularization in PEG, but substantial angiogenesis in bFGF-adsorbed and/or microchanneled PEG. The infiltrating host tissue consisted of erythrocyte-filled blood vessels lined by endothelial cells, and immunolocalized to vascular endothelial growth factor (VEGF). Human mesenchymal stem cells were differentiated into adipogenic cells, and encapsulated in PEG with both microchanneled and adsorbed bFGF. Upon in vivo implantation subcutaneously in immunodeficient mice, oil red O positive adipose tissue was present and interspersed with interstitial fibrous (IF) capsules. VEGF was immunolocalized in the IF capsules surrounding the engineered adipose tissue. These findings suggest that bioactive cues and/or microchannels promote the genesis of vascularized tissue phenotypes such as the tested adipose tissue grafts. Especially, engineered microchannels may provide a generic approach for modifying existing biomaterials by providing conduits for vascularization and/or diffusion.

Lubrication of the temporomandibular joint

Although tissue engineering of the temporomandibular joint (TMJ) structures is in its infancy, tissue engineering provides the revolutionary possibility for treatment of temporomandibular disorders (TMDs). Recently, several reviews have provided a summary of knowledge of TMJ structure and function at the biochemical, cellular, or mechanical level for tissue engineering of mandibular cartilage, bone and the TMJ disc. As the TMJ enables large relative movements, joint lubrication can be considered of great importance for an understanding of the dynamics of the TMJ. The tribological characteristics of the TMJ are essential for reconstruction and tissue engineering of the joint. The purpose of this review is to provide a summary of advances relevant to the tribological characteristics of the TMJ and to serve as a reference for future research in this field. This review consists of four parts. Part 1 is a brief review of the anatomy and function of the TMJ articular components. In Part 2, the biomechanical and biochemical factors associated with joint lubrication are described: the articular surface topology with microscopic surface roughness and the biomechanical loading during jaw movements. Part 3 includes lubrication theories and possible mechanisms for breakdown of joint lubrication. Finally, in Part 4, the requirement and possibility of tissue engineering for treatment of TMDs with degenerative changes as a future treatment regimen will be discussed in a tribological context.

Matrices and scaffolds for drug delivery in dental, oral and craniofacial tissue engineering

Current treatments for diseases and trauma of dental, oral and craniofacial (DOC) structures rely on durable materials such as amalgam and synthetic materials, or autologous tissue grafts. A paradigm shift has taken place to utilize tissue engineering and drug delivery approaches towards the regeneration of these structures. Several prototypes of DOC structures have been regenerated such as temporomandibular joint (TMJ) condyle, cranial sutures, tooth structures and periodontium components. However, many challenges remain when taking in consideration the high demand for esthetics of DOC structures, the complex environment and yet minimal scar formation in the oral cavity, and the need for accommodating multiple tissue phenotypes. This review highlights recent advances in the regeneration of DOC structures, including the tooth, periodontium, TMJ, cranial sutures and implant dentistry, with specific emphasis on controlled release of signaling cues for stem cells, biomaterial matrices and scaffolds, and integrated tissue engineering approaches.

Mesenchymal stem cells and tissue engineering

Mesenchymal stem cells (MSCs) have become one of the most studied stem cells, especially toward the healing of diseased and damaged tissues and organs. MSCs can be readily isolated from a number of adult tissues by means of minimally invasive approaches. MSCs are capable of self-replication to many passages and, therefore, can potentially be expanded to sufficient numbers for tissue and organ regeneration. MSCs are able to differentiate into multiple cell lineages that resemble osteoblasts, chondrocytes, myoblasts, adipocytes, and fibroblasts and express some of the key markers typical of endothelial cells, neuron-like cells, and cardiomyocytes. MSCs have been used alone for cell delivery or seeded in biomaterial scaffolds toward the healing of tissue and organ defects. After an increasing number of the "proof of concept" studies, the remaining tasks are many, such as to determine MSC interactions with host cells and signaling molecules, to investigate the interplay between MSCs and biological scaffold materials, and to apply MSC-based therapies toward clinically relevant defect models. The ultimate goal of MSC-based therapies has valid biological rationale in that clusters of MSCs differentiate to form virtually all connective tissue during development. MSC-based therapies can only be realized our improved understanding of not only their fundamental properties such as population doubling and differentiation pathways but also translational studies that use MSCs in the de novo formation and/or regeneration of diseased or damaged tissues and organs.