Biomedical Applications of Silver Nanoparticles: An Up-to-Date Overview

Silver-doped active carbon spheres and their application for microbial decontamination of water

Highly efficient and durable, silver nanoparticles doped Active Carbon Spheres ACS(Ag) were synthesized by carbonization and activation of silver exchanged resins. The silver exchanged resins were prepared by exchanging H⁺ ions of polystyrene sulphonate resin with Ag⁺ ions of silver nitrate (AgNO₃). The quantity of Ag⁺ in the spheres was controlled by varying the concentration of AgNO₃, from 0.0125 to 0.1 M. With increasing molar concentration of AgNO_3, the effective intake of Ag⁺ by the sphere increases from 1.1 to 8.1 weight percent (wt %). For activation, the spheres were incubated in the CO₂ atmosphere for 6 h at fixed soaking temperature i.e. 1123 K. The characterization of synthesized silver doped ACS was performed by using different sophisticated instrumental techniques. The antimicrobial activity of silver doped ACS was studied against different bacterial strains like, E. coli, B. subtilis and Staphylococcus aureus. The study demonstrated that the zone of inhibition for E. coli was 16.9 ± 0.7 mm while for B. subtilis it was 17.1 ± 0.3 mm at a concentration of 8 mg of synthesized material. In addition, satisfactory results were obtained in shake flask and filtration test experiments also, even at a low concentration of 2 mg, showing growth inhibition of 94% for E. coli and 93% for B. subtilis. When the concentration of silver doped ACS was increased to 8 mg, complete removal of both the bacteria was observed after 24 h (100 % reduction for E. coli and B. subtilis). Furthermore, when silver doped ACS was tested against Staphylococcus aureus according to ASTM:E 2149-01 method, biocidal activity of up to 73% was observed. Therefore, the silver doped ACS can be considered as a potential biocidal material for the studied bacterial strains and hence find suitable application for decontamination of water.

•

Novel low-density silver doped active carbon spheres (ACS) were synthesized successfully.

•

Characterization and antibacterial activity was examined for water decontamination application.

•

Results revealed that the material effectively reduced microbial load by 99.9 %.

Targeting Multidrug Resistance With Antimicrobial Peptide-Decorated Nanoparticles and Polymers

As a category of small peptides frequently found in nature, antimicrobial peptides (AMPs) constitute a major part of the innate immune system of various organisms. Antimicrobial peptides feature various inhibitory effects against fungi, bacteria, viruses, and parasites. Due to the increasing concerns of antibiotic resistance among microorganisms, development of antimicrobial peptides is an emerging tool as a favorable applicability prospect in food, medicine, aquaculture, animal husbandry, and agriculture. This review presents the latest research progress made in the field of antimicrobial peptides, such as their mechanism of action, classification, application status, design techniques, and a review on decoration of nanoparticles and polymers with AMPs that are used in treating multidrug resistance. Lastly, we will highlight recent progress in antiviral peptides to treat emerging viral diseases (e.g., anti-coronavirus peptides) and discuss the outlook of AMP applications.

Inorganic Nanoparticles in Bone Healing Applications

Modern biomedicine aims to develop integrated solutions that use medical, biotechnological, materials science, and engineering concepts to create functional alternatives for the specific, selective, and accurate management of medical conditions. In the particular case of tissue engineering, designing a model that simulates all tissue qualities and fulfills all tissue requirements is a continuous challenge in the field of bone regeneration. The therapeutic protocols used for bone healing applications are limited by the hierarchical nature and extensive vascularization of osseous tissue, especially in large bone lesions. In this regard, nanotechnology paves the way for a new era in bone treatment, repair and regeneration, by enabling the fabrication of complex nanostructures that are similar to those found in the natural bone and which exhibit multifunctional bioactivity. This review aims to lay out the tremendous outcomes of using inorganic nanoparticles in bone healing applications, including bone repair and regeneration, and modern therapeutic strategies for bone-related pathologies.

Recent Advances and Mechanistic Insights into Antibacterial Activity, Antibiofilm Activity, and Cytotoxicity of Silver Nanoparticles

The substantial increase in multidrug-resistant (MDR) pathogenic bacteria is a major threat to global health. Recently, the Centers for Disease Control and Prevention reported possibilities of greater deaths due to bacterial infections than cancer. Nanomaterials, especially small-sized (size ≤10 nm) silver nanoparticles (AgNPs), can be employed to combat these deadly bacterial diseases. However, high reactivity, instability, susceptibility to fast oxidation, and cytotoxicity remain crucial shortcomings for their uptake and clinical application. In this review, we discuss various AgNPs-based approaches to eradicate bacterial infections and provide comprehensive mechanistic insights and recent advances in antibacterial activity, antibiofilm activity, and cytotoxicity (both in vitro and in vivo) of AgNPs. The mechanistic of antimicrobial activity involves four steps: (i) adhesion of AgNPs to cell wall/membrane and its disruption; (ii) intracellular penetration and damage; (iii) oxidative stress; and (iv) modulation of signal transduction pathways. Numerous factors affecting the bactericidal activity of AgNPs such as shape, size, crystallinity, pH, and surface coating/charge have also been described in detail. The review also sheds light on antimicrobial photodynamic therapy and the role of AgNPs versus Ag⁺ ions release in bactericidal activities. In addition, different methods of synthesis of AgNPs have been discussed in brief.

Does Nanosilver Have a Pronounced Toxic Effect on Humans?

Due to the development of high-tech industries, the modern world is characterized by the increased production and consumption of nanoparticles (NPs) and nanomaterials. Among produced metal nanoparticles, silver nanoparticles are widely used in everyday life products, cosmetics, and medicine. It has already been established that, in nanoscale form, many even inert materials become toxic. Therefore, the study of the toxicity of various substances in nanoscale form is an urgent scientific task. There is now a body of experience on the toxic effect of AgNPs. In the present review, the most well-known results obtained over the 2009–2021 period, including the own performance on the toxicity of silver NPs, are collected and analyzed. Along with the data reporting a certain level of toxicity of silver NPs, experiments that did not reveal any obvious toxicity of nanosized forms of silver are discussed. According to the performed studies, the toxicity of silver NPs is often caused not by NPs themselves but by silver ions, compounds used for nanoparticle stabilization, and other reasons. Based on the analysis of the collected data, it can be concluded that at actual levels of silver NPs used in everyday life, workplace, and medicine, they will not have strong toxic effects on a healthy adult body.

Nanomaterials-based drug delivery approaches for wound healing

Abstract:

Wound healing is a complex and dynamic process that requires intricate synchronization between multiple cell types within appropriate extracellular microenvironment. Wound healing process involves four overlapping phases in a precisely regulated manner, consisting of hemostasis, inflammation, proliferation, and maturation. For an effective wound healing all four phases must follow in a sequential pattern within a time frame. Several factors might interfere with one or more of these phases in healing process, thus causing improper or impaired wound healing resulting in non-healing chronic wounds. The complications associated with chronic non-healing wounds, along with the limitations of existing wound therapies, have led to the development and emergence of novel and innovative therapeutic interventions. Nanotechnology presents unique and alternative approaches to accelerate the healing of chronic wounds by the interaction of nanomaterials during different phases of wound healing. This review focuses on recent innovative nanotechnology-based strategies for wound healing and tissue regeneration based on nanomaterials, including nanoparticles, nanocomposites and scaffolds. The efficacy of the intrinsic therapeutic potential of nanomaterials (including silver, gold, zinc oxide, copper, cerium oxide, etc.) and the ability of nanomaterials as carriers (liposomes, hydrogels, polymeric nanomaterials, nanofibers) as therapeutic agents associated with wound-healing applications have also been addressed. The significance of these nanomaterial-based therapeutic interventions for wound healing needs to be highlighted to engage researchers and clinicians towards this new and exciting area of bio-nanoscience. We believe that these recent developments will offer researchers an updated source on the use of nanomaterials as an advanced approach to improve wound healing.

Recent Advances in the Gastrointestinal Fate of Organic and Inorganic Nanoparticles in Foods

Inorganic or organic nanoparticles are often incorporated into foods to enhance their quality, stability, nutrition, or safety. When they pass through the gastrointestinal environment, the properties of these nanoparticles are altered, which impacts their biological effects and potential toxicity. Consequently, there is a need to understand how different kinds of nanoparticles behave within the gastrointestinal tract. In this article, the current understanding of the gastrointestinal fate of nanoparticles in foods is reviewed. Initially, the fundamental physicochemical and structural properties of nanoparticles are discussed, including their compositions, sizes, shapes, and surface chemistries. Then, the impact of food matrix effects and gastrointestinal environments on the fate of ingested nanoparticles is discussed. In particular, the influence of nanoparticle properties on food digestion and nutraceutical bioavailability is highlighted. Finally, future research directions are highlighted that will enable the successful utilization of nanotechnology in foods while also ensuring they are safe.

Synergistic Effects Between Metal Nanoparticles and Commercial Antimicrobial Agents: A Review

Nanotechnology has expanded into a broad range of clinical applications. In particular, metal nanoparticles (MNPs) display unique antimicrobial properties, a fundamental function of novel medical devices. The combination of MNPs with commercial antimicrobial drugs (e.g., antibiotics, antifungals, and antivirals) may offer several opportunities to overcome some disadvantages of their individual use and enhance effectiveness. MNP conjugates display multiple advantages. As drug delivery systems, the conjugates can extend the circulation of the drugs in the body, facilitate intercellular targeting, improve drug stabilization, and possess superior delivery. Concomitantly, they reduce the required drug dose, minimize toxicity, and broaden the antimicrobial spectrum. In this work, the common strategies to combine MNPs with clinically used antimicrobial agents are underscored. Furthermore, a comprehensive survey about synergistic antimicrobial effects, the mechanism of action, and cytotoxicity is depicted.

Bell Shape Curves of Hemolysis Induced by Silver Nanoparticles: Review and Experimental Assay

The hemolytic activity assay is a versatile tool for fast primary toxicity studies. This work presents a systematic study of the hemolytic properties of ArgovitTM silver nanoparticles (AgNPs) extensively studied for biomedical applications. The results revealed an unusual and unexpected bell-shaped hemolysis curve for human healthy and diabetic donor erythrocytes. With the decrease of pH from 7.4 and 6.8 to 5.6, the hemolysis profiles for AgNPs and AgNO3 changed dramatically. For AgNPs, the bell shape changed to a step shape with a subsequent sharp increase, and for AgNO3 it changed to a gradual increase. Explanations of these changes based on the aggregation of AgNPs due to the increase of proton concentration were suggested. Hemolysis of diabetic donor erythrocytes was slightly higher than that of healthy donor erythrocytes. The meta-analysis revealed that for only one AgNPs formulation (out of 48), a bell-shaped hemolysis profile was reported, but not discussed. This scarcity of data was explained by the dominant goal of studies consisting in achieving clinically significant hemolysis of 5-10%. Considering that hemolysis profiles may be bell-shaped, it is recommended to avoid extrapolations and to perform measurements in a wide concentration interval in hemolysis assays.

Antiviral Properties of Silver Nanoparticles against SARS-CoV-2: Effects of Surface Coating and Particle Size

Coronavirus disease 2019 (COVID-19) has spread rapidly and led to over 5 million deaths to date globally. Due to the successively emerging mutant strains, therapeutics and prevention against the causative virus, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), are urgently needed. Prevention of SARS-CoV-2 infection in public and hospital areas is essential to reduce the frequency of infections. Silver nanoparticles (AgNPs) with virucidal effects have been reported. Therefore, we investigated the virucidal activity and safety of ten types of AgNPs with different surface modifications and particle sizes, in cells exposed to SARS-CoV-2 in vitro. The AgNPs could effectively inhibit the activity of SARS-CoV-2, and different surface modifications and particle sizes conferred different virucidal effects, of which 50-nm BPEI showed the strongest antiviral effect. We concluded that the efficacy of each type of AgNP type was positively correlated with the corresponding potential difference (R² = 0.82). These in vitro experimental data provide scientific support for the development of therapeutics against COVID-19, as well as a research basis for the development of broad-spectrum virucides. Given the increasing acquired resistance of pathogens against conventional chemical and antibody-based drugs, AgNPs may well be a possible solution for cutting off the route of transmission, either as an external material or a potential medicine.

Benefit of Silver and Gold Nanoparticles in Wound Healing Process after Endometrial Cancer Protocol

It is intractable to manage the vast majority of wounds in a classical surgical manner, however if silver, likewise gold and its representative nanoparticles, can lead to the amelioration of the wound healing process after extensive procedures, they should be employed in the current gynecological practice as promptly as possible. Most likely due to its antimicrobial properties, silver is usually applied as an additional component in the wound healing process. In wound management, we obtained various aspects that can lead to impaired wound healing; the crucial aspect for the wound milieu is to prevent the offending agents from occurring. The greatest barrier to healing is represented by the bacterial biofilm, which can occur naturally or in other ways. Biofilm bacteria can produce extracellular polymers, which can then resist concentrated anti-bacterial treatment. The published literature on the use of silver nanoparticles’ utilization in wound healing becomes slightly heterogenous and requires us in difficult moments to set up proper treatment guidelines.

Plant-Mediated Green Synthesis of Ag NPs and Their Possible Applications: A Critical Review

The potential applications of Ag NPs are exciting and beneficial in a variety of fields; however, there is less awareness of the new risks posed by inappropriate disposal of Ag NPs. The Ag NPs have medicinal, plasmonic, and catalytic properties. The Ag NPs can be prepared via physical, chemical, or biological routes, and the selection of any specific route depends largely on the end-use. The downside of a physical and chemical approach is that it requires a wide space, high temperature, high temperature for a longer time to preserve the thermal stability of synthesized Ag NPs, and the use of toxic chemicals. Although these methods produce nanoparticles with high purity and well-defined morphology, it is critical to develop cost-effective, energy-efficient, and facile route, such as green synthesis; it suggests the desirable use of renewable resources by avoiding the use of additional solvents and toxic reagents in order to achieve the ultimate goal. However, each method has its pros and cons. The synthesized Ag NPs obtained using the green approach have larger biocompatibility and are less toxic towards the biotic systems. However, identifying the phytoconstituents that are responsible for nanoparticle synthesis is difficult and has been reported as a suitable candidate for biological application. The concentration of the effective bioreducing phytoconstituents plays a crucial role in deciding the morphology of the nanoparticle. Besides these reaction times, temperature, pH, and concentration of silver salt are some of the key factors that determine the morphology. Hence, careful optimization in the methodology is required as different morphologies have different properties and usage. It is due to which the development of methods to prepare nanoparticles effectively using various plant extracts is gaining rapid momentum in recent days. To make sense of what involves in the bioreduction of silver salt and to isolate the secondary metabolites from plants are yet challenging. This review focuses on the contribution of plant-mediated Ag NPs in different applications and their toxicity in the aquatic system.

Strong Antimicrobial Activity of Silver Nanoparticles Obtained by the Green Synthesis in Viridibacillus sp. Extracts

Recently, green silver nanoparticles (G-AgNPs) have gained much attention in medical science due to their extraordinary effects against multidrug-resistant microorganisms. The strong antimicrobial nature of G-AgNPs corresponds to their unique physicochemical properties such as size, shape, surface charge, and active surface groups available to interact with the pathogens. The current study demonstrates a simple, environmentally friendly, and economical method to produce G-AgNPs from an environmental isolate of Viridibacillus sp. The produced G-AgNPs were characterized by various analytical methods, including UV-Vis spectroscopy, single-particle inductively coupled plasma-mass spectrometry (sp-ICP-MS), scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDX), elemental mapping, transmission electron microscopy (TEM), dynamic light scattering (DLS), Fourier-transform infrared spectroscopy (FTIR), and Thermogravimetric analysis (TGA). The reduction of Ag⁺ to Ag° was observed by UV-Vis spectroscopy, which demonstrated the formation of stable G-AgNPs with a Surface Plasmon Resonance (SPR) band at the maximum of 430 nm. TEM analysis demonstrated that the G-AgNPs were spherical with a 5–30 nm size range. The produced G-AgNPs were stable for more than 1 year in an aqueous solution at 4°C. Importantly, G-AgNPs showed remarkable antimicrobial activity against Gram-negative pathogens- E. coli and P. aeruginosa with MIC values of 0.1 and 4 μg/mL and MBC values of 1 and 8 μg/mL, respectively. This level of antimicrobial activity is superior to other AgNPs reported in the literature.

Recent Progress in Materials Chemistry to Advance Flexible Bioelectronics in Medicine

Designing bioelectronic devices that seamlessly integrate with the human body is a technological pursuit of great importance. Bioelectronic medical devices that reliably and chronically interface with the body can advance neuroscience, health monitoring, diagnostics, and therapeutics. Recent major efforts focus on investigating strategies to fabricate flexible, stretchable, and soft electronic devices, and advances in materials chemistry have emerged as fundamental to the creation of the next generation of bioelectronics. This review summarizes contemporary advances and forthcoming technical challenges related to three principal components of bioelectronic devices: i) substrates and structural materials, ii) barrier and encapsulation materials, and iii) conductive materials. Through notable illustrations from the literature, integration and device fabrication strategies and associated challenges for each material class are highlighted.

Multitherapeutic Efficacy of Curly Kale Extract Fabricated Biogenic Silver Nanoparticles

Purpose

Due to the biomedical applications universally, the Ag nanoparticles are one of the most commonly investigated nanoparticles (NPs). Curly kale (BroL) leaves contain numerous beneficial nutrients and phytochemicals. The aim of the current study is the fabrication of the Ag nanoparticles using the extracts of curly kale and to investigate their biological potentials.

Methods

The characterization of the generated BroLAgNPs was done through UV-Vis spectro study, Fourier-transform infrared spectro study, scanning electron microscope analysis, energy-dispersive X-ray study, distribution of size and zeta potential investigation, and X-ray powder diffraction study, and their biological effects were evaluated by antidiabetic, antioxidant, antibacterial and cytotoxicity effect.

Results

BroL-Ag nanoparticle displayed surface plasmon resonance at 432 nm. The Zeta potential of BroL (−26.6) AgNPs displayed a highly negative charge. In antidiabetic assay, BroL-AgNPs was highly effective with IC₅₀ value 2.29 µg/mL at 1.0 µg/mL concentration. In cytotoxicity assay, BroL-AgNPs displayed strong activity at 10.0 µg/mL concentration. It showed inhibitory action against three food-borne pathogenic bacteria (9.29–11.44 mm inhibition zone) and displayed moderate antioxidant potential.

Conclusion

This study as a whole report an eco-friendly green synthesis of AgNPs using leafy vegetable aqueous extract and its multi-biological effects which could serve as a promising candidate in pharmacological and related industries.

One-pot biofabrication and characterization of Tara gum/Riceberry phenolics-silver nanogel: A cytocompatible and green nanoplatform with multifaceted biological applications

This work proposed a one-pot green route for the development of a biocompatible Tara gum-Riceberry phenolics‑silver nanosphere hybrid nanocomposite (TG/RiPE-SNG) with manifold biological potentialities. The reaction system comprised of AgNO₃ as nanosilver precursor, Riceberry phenolic extract as the green in situ reductant, and Tara gum as stabilizing and anchoring agent. TG/RiPE-SNG was extensively characterized using UV-vis spectroscopy, FTIR, RAMAN, TEM, FESEM, EDX, DLS/zeta potential, XRD, and TGA analyses. Small, stable, spherical, well-dispersed SNP with an average particle size of 13.01 nm and λ_max of 421 nm were synthesized in situ, and uniformly distributed within the gel-like TG/RiPE composite. The prepared nanocomposite demonstrated superior antibacterial properties (MIC of 12.5 μg/mL) against S. aureus and S. epidermidis compared to the gum or extract. Additionally, TG/RiPE-SNG exhibited strong light barrier, tyrosinase inhibitory and antioxidant functionalities. TG/RiPE-SNG also exhibited high stability at different pH and was more thermally stable relative to the plain TG/RiPE composite. Furthermore, TG/RiPE-SNG showed good biocompatibility towards mouse L929 fibroblasts and rat erythrocytes. The obtained findings revealed a simple, benign, and inexpensive approach using only natural ingredients for the preparation of gum-based biopolymer-nanosilver hybrid nanocomposite and underscored the strong attributes of TG/RiPE-SNP as a nanomaterial with desirable biomedical potentials.

Comparison of antimicrobial and wound-healing effects of silver nanoparticle and chlorhexidine mouthwashes: an in vivo study in rabbits

The objective is to formulate a silver nanoparticle mouthwash and then evaluate its antimicrobial and wound-healing effects in rabbit animal models. Microbial samples were collected from the oral cavity of 60 rabbits. Thereafter, standardized wounds were created in the lateral border of the tongue on the right side for all rabbits. After surgery, digital photographs were obtained from the wounds with standardized settings. To characterize the silver nanoparticles used in the synthetic mouthwash, transmission electron microscopy (TEM) and digital light scattering analysis were used. The animal models were then randomly divided into 4 groups: group 1 received 9.80 wt% silver nanoparticle mouthwash; group 2 received all the ingredients of the formulated mouthwash except for silver nanoparticles; group 3 received chlorhexidine 2.0% mouthwash; and the negative control group did not receive any postoperative mouthwash. Microbial samples were collected from oral cavity of the rabbits each day for four postoperative days. Colony-forming unit (CFU) counts were compared post-operatively with the pre-operative counts. In addition, standardized digital photographs were taken each day from the wounds and the area of the wounds was compared in postoperative and pre-operative images. Data were statistically analyzed using one-way ANOVA and repeated measures variance analysis (α = 0.05). TEM revealed spherical morphology of silver nanoparticles and digital light scattering showed an average size of 5 nm and optimal distribution of the nanoparticles. CFU count significantly decreased in groups 1 and 3 (P < 0.001), while it significantly increased in groups 2 and 4 (P < 0.001). Moreover, a significant difference was observed between the experimental groups (P < 0.001). In addition, wound area decreased significantly in all groups (P < 0.001). However, the difference between wound areas in the groups was not significant, except for the 4th postoperative day (P < 0.001). However, the antibacterial effects and the wound-healing characteristics of the synthetic silver nanoparticle and chlorhexidine mouthwashes were not significantly different (P > 0.05). Silver nanoparticle mouthwash possesses favorable antibacterial and wound-healing effects. The formulated 9.80 wt% silver nanoparticle mouthwash with a particle size of 5 nm can be a promising alternative for application after oral surgical procedures.

Nanomaterials for application in wound Healing: current state-of-the-art and future perspectives

Nanoparticles are the gateway to the new era in drug delivery of biocompatible agents. Several products have emerged from nanomaterials in quest of developing practical wound healing dressings that are nonantigenic, antishear stress, and gas-exchange permeable. Numerous studies have isolated and characterised various wound healing nanomaterials and nanoproducts. The electrospinning of natural and synthetic materials produces fine products that can be mixed with other wound healing medications and herbs. Various produced nanomaterials are highly influential in wound healing experimental models and can be used commercially as well. This article reviewed the current state-of-the-art and briefly specified the future concerns regarding the different systems of nanomaterials in wound healing (i.e., inorganic nanomaterials, organic and hybrid nanomaterials, and nanofibers). This review may be a comprehensive guidance to help health care professionals identify the proper wound healing materials to avoid the usual wound complications.

Recent Developments in Metallic Nanomaterials for Cancer Therapy, Diagnosing and Imaging Applications

Cancer continues to represent a global health concern, imposing an ongoing need to research for better treatment alternatives. In this context, nanomedicine seems to be the solution to existing problems, bringing unprecedented results in various biomedical applications, including cancer therapy, diagnosing, and imaging. As numerous studies have uncovered the advantageous properties of various nanoscale metals, this review aims to present metal-based nanoparticles that are most frequently employed for cancer applications. This paper follows the description of relevant nanoparticles made of metals, metal derivatives, hybrids, and alloys, further discussing in more detail their potential applications in cancer management, ranging from the delivery of chemotherapeutics, vaccines, and genes to ablative hyperthermia therapies and theranostic platforms.

Green Synthesis and Potential Antibacterial Applications of Bioactive Silver Nanoparticles: A Review

Green synthesis of silver nanoparticles (AgNPs) using biological resources is the most facile, economical, rapid, and environmentally friendly method that mitigates the drawbacks of chemical and physical methods. Various biological resources such as plants and their different parts, bacteria, fungi, algae, etc. could be utilized for the green synthesis of bioactive AgNPs. In recent years, several green approaches for non-toxic, rapid, and facile synthesis of AgNPs using biological resources have been reported. Plant extract contains various biomolecules, including flavonoids, terpenoids, alkaloids, phenolic compounds, and vitamins that act as reducing and capping agents during the biosynthesis process. Similarly, microorganisms produce different primary and secondary metabolites that play a crucial role as reducing and capping agents during synthesis. Biosynthesized AgNPs have gained significant attention from the researchers because of their potential applications in different fields of biomedical science. The widest application of AgNPs is their bactericidal activity. Due to the emergence of multidrug-resistant microorganisms, researchers are exploring the therapeutic abilities of AgNPs as potential antibacterial agents. Already, various reports have suggested that biosynthesized AgNPs have exhibited significant antibacterial action against numerous human pathogens. Because of their small size and large surface area, AgNPs have the ability to easily penetrate bacterial cell walls, damage cell membranes, produce reactive oxygen species, and interfere with DNA replication as well as protein synthesis, and result in cell death. This paper provides an overview of the green, facile, and rapid synthesis of AgNPs using biological resources and antibacterial use of biosynthesized AgNPs, highlighting their antibacterial mechanisms.

Plant Extract-Synthesized Silver Nanoparticles for Application in Dental Therapy

Oral diseases are the most common non-communicable diseases in the world, with dental caries and periodontitis causing major health and social problems. These diseases can progress to systematic diseases and cause disfigurement when left untreated. However, treatment of oral diseases is among the most expensive treatments and often focus on restoration of form and function. Caries prevention has traditionally relied on oral hygiene and diet control, among other preventive measures. In this paper, these measures are not disqualified but are brought into a new context through the use of nanotechnology-based materials to improve these conventional therapeutic and preventive measures. Among inorganic nanomaterials, silver nanoparticles (AgNPs) have shown promising outcomes in dental therapy, due to their unique physicochemical properties and enhanced anti-bacterial activities. As such, AgNPs may provide newer strategies for treatment and prevention of dental infections. However, numerous concerns around the chemical synthesis of nanomaterials, which are not limited to cost and use of toxic reducing agents, have been raised. This has inspired the green synthesis route, which uses natural products as reducing agents. The biogenic AgNPs were reported to be biocompatible and environmentally friendly when compared to the chemically-synthesized AgNPs. As such, plant-synthesized AgNPs can be used as antimicrobial, antifouling, and remineralizing agents for management and treatment of dental infections and diseases.

Exploring electroactive microenvironments in polymer-based nanocomposites to sensitize bacterial cells to low-dose embedded silver nanoparticles

The search for alternative antimicrobial strategies capable of avoiding resistance mechanisms in bacteria are highly needed due to the alarming emergence of antimicrobial resistance. The application of physical stimuli as a mean of sensitizing bacteria for the action of antimicrobials on otherwise resistant bacteria or by allowing the action of low quantity of antimicrobials may be seen as a breakthrough for such purpose. This work proposes the development of antibacterial nanocomposites using the synergy between the electrically active microenvironments, created by a piezoelectric polymer (poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE)), with green-synthesized silver nanoparticles (AgNPs). The electrical microenvironment is generated via mechanical stimulation of piezoelectric PVDF-TrFE/AgNPs films using a lab-made mechanical bioreactor. The generated material's electrical response further translates to bacterial cells, namely Escherichia coli and Staphylococcus epidermidis which in combination with AgNPs and the specific morphological features of the material induce important antibacterial and antibiofilm activity. Both porous and non-porous PVDF composites have shown antibacterial characteristics when stimulated at a mechanical frequency of 4 Hz being the effect boosted when AgNPs were incorporated in the nanocomposite, reducing in more than 80% the S. epidermidis bacterial growth in planktonic and biofilm form. The electroactive environments sensitize the bacteria allowing the action of a low dose of AgNPs (1.69% (w/w)). Importantly, the material did not compromise the viability of mammalian cells, thus being considered biocompatible. The piezoelectric stimulation of PVDF-based polymeric films may represent a breakthrough in the development of antibacterial coatings for devices used at hospital setting, taking advantage on the use of mechanical stimuli (pressure/touch) to exert antibacterial and antibiofilm activity. STATEMENT OF SIGNIFICANCE: The application of physical methods in alternative to the common chemical ones is seen as a breakthrough for avoiding the emergence of antimicrobial resistance. Antimicrobial strategies that take advantage on the capability of bacteria to sense physical stimuli such as mechanical and electrical cues are scarce. Electroactive nanocomposites comprised of poly(vinylidene fluoride-co-trifluoroethylene (PVDF-TrFE) and green-synthesized silver nanoparticles (AgNPs) were developed to obtain material able to inhibit the colonization of microorganisms. By applying a mechanical stimuli to the nanocomposite, which ultimately mimics movements such as walking or touching, an antimicrobial effect is obtained, resulting from the synergy between the electroactive microenvironments created on the surface of the material and the AgNPs. Such environments sensitize the bacteria to low doses of antimicrobials.

Role of Biogenic Capping Agents in the Synthesis of Metallic Nanoparticles and Evaluation of Their Therapeutic Potential

The biomedical properties of nanoparticles have been the area of focus for contemporary science; however, there are issues concerning their long-term toxicities. Recent trends in nanoparticle fabrication and surface manipulation, the use of distinctive biogenic capping agents, have allowed the preparation of nontoxic, surface-functionalized, and monodispersed nanoparticles for medical applications. These capping agents act as stabilizers or binding molecules that prevent agglomeration and steric hindrance, alter the biological activity and surface chemistry, and stabilize the interaction of nanoparticles within the preparation medium. Explicit features of nanoparticles are majorly ascribed to the capping present on their surface. The present review article is an attempt to compile distinctive biological capping agents deployed in the synthesis of metal nanoparticles along with the medical applications of these capped nanoparticles. First, this innovative review highlights the various biogenic capping agents, including biomolecules and biological extracts of plants and microorganisms. Next, the therapeutic applications of capped nanoparticles and the effect of biomolecules on the efficiency of the nanoparticles have been expounded. Finally, challenges and future directions on the use of biological capping agents have been concluded. The goal of the present review article is to provide a comprehensive report to researchers who are looking for alternative biological capping agents for the green synthesis of important metallic nanoparticles.

An efficient and green one-pot synthesis of tetrahydrobenzo[a]xanthenes, 1,8-dioxo-octahydroxanthenes and dibenzo[a,j]xanthenes by Fe3O4@Agar-Ag as nanocatalyst

Agar-coated Fe₃O₄ nanoparticles (Fe₃O₄@agar) were prepared simply through in situ co-precipitation of Fe²⁺ and Fe³⁺ ions via NH₄OH in an aqueous solution of Agar. Coating of Ag⁺ ions on the surface of the latter followed by mild reduction of Ag⁺ with NaBH₄ gives Fe₃O₄@Agar-Ag NPs. The magnetic Fe₃O₄@Agar-Ag nanocatalyst was characterized thoroughly by FT-IR, XRD, SEM, TEM, VSM, EDX, TGA, and ICP analyses. Its catalytic activity was assessed in the synthesis of 12-aryl-8,9,10,12-tetrahydrobenzo[a]xanthene-11-one, 14-aryl-14H-dibenzo[a,j]xanthenes, and 1,8-dioxo-octahydroxanthene derivatives through a one-pot condensation of dimedone, 2-naphthol, and aryl aldehydes in EtOH. This novel method represents lots of advantages compared to the previous researches, such as avoiding the toxic catalysts, easy method for isolation of the products, satisfying yields, totally clean conditions, and simplicity of the methodology. This catalytic system is attributed to an eco-friendly process, high catalytic activity, and facility of recovery using an external magnet. A novel and magnetically recyclable catalyst known as Fe3O4@Agar-Ag NPs as a heterogeneous catalyst were synthesized by a simple method. Using this facile, efficient, and eco-friendly Nanocomposite, for the different models of xanthene reaction was represented.

Valorizing the Unexplored Filtration Waste of Brewing Industry for Green Silver Nanocomposite Synthesis

The brewing industry generates a substantial amount of by-products rich in polyphenols, carbohydrates, sugars, sulfates, nitrogen compounds, organic carbon, and several elements, including chlorine, magnesium, and phosphorus. Although limited quantities of these by-products are used in fertilizers and composts, a large amount is discarded as waste. Therefore, it is crucial to identify different ways of valorizing the by-products. Research regarding the valorization of the brewery by-products is still in its nascent stage; therefore, it still has high potential. Herein, we report the valorization of the brewery by-product from the filtration stage of the brewing process (BW9) to synthesize silver nanocomposites as this waste has remained largely unexplored. The BW9 nanocomposites have been compared to those obtained from the brewery product B. The chemical composition analysis of BW9 and B revealed several organic moieties capable of reducing metal salts and capping the formed nanoparticles. Therefore, the brewery waste from stage 9 was valorized as a precursor and added to silver-based precursor at various temperatures (25, 50, and 80 °C) and for various time periods (10, 30, and 120 min) to synthesize silver nanocomposites. The nanocomposites obtained using BW9 were compared to those obtained using the main product of the brewing industry, beer (B). Synthesized nanocomposites composed of AgCl as a major phase and silver metal (Ag_met) was incorporated in minor quantities. In addition, Ag₃PO₄ was also found in B nanocomposites in minor quantities (up to 34 wt.%). The surface morphology depicted globular nanoparticles with layered structures. Small ball-like aggregates on the layer representative of Ag₃PO₄ were observed in B nanocomposites. The surface of nanocomposites was capped with organic content and functional groups present in the brewery products. The nanocomposites demonstrated high antibacterial activity against Escherichia coli (E. coli), with BW9 nanocomposites exhibiting a higher activity than B nanocomposites.

Comparative study of biogenically synthesized silver and gold nanoparticles of Acacia auriculiformis leaves and their efficacy against Alzheimer's and Parkinson's disease

The present article reports the biogenic synthesis of silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) from the extract of Acacia auriculiformis (AA) leaves using biogenic approach. Several spectral and morphological studies namely UV-vis, Fourier transform infrared (FT-IR), tunneling electron microscopy along with selected area electron diffraction (TEM/SAED), scanning electron microscopy along with energy dispersive X-ray (SEM-EDX) and X-ray diffraction (XRD) were carried out which ascertains the successful formation of silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) starting from Silver nitrate and Chloroauric acid respectively. On the basis of TEM/SAED and SEM-EDX, AgNPs were found to be more regular with smaller particle size and hence they were selected for biological studies. Thermal techniques like thermo gravimetric analysis (TGA) and differential thermal analysis (DTA) were also performed to study the comparative thermal stability of AgNPs and AuNPs where AgNPs were found to be thermally more stable. Several biophysical techniques including Thioflavin T assay, ANS assay, Rayleigh scattering method and turbidity assay were also performed. These assays confirm that AgNPs possess better inhibitory property. Moreover, antioxidant activity of AgNPs was also carried out using 2,2-diphenyl-1-picrylhydrazyl (DPPH) and AgNPs were found to be good antioxidant.

Advances in Copper-Based Biomaterials With Antibacterial and Osteogenic Properties for Bone Tissue Engineering

Treating bone defects coupled with pathogen infections poses a formidable challenge to clinical medicine. Thus, there is an urgent need to develop orthopedic implants that provide excellent antibacterial and osteogenic properties. Of the various types, copper-based biomaterials capable of both regenerating bone and fighting infections are an effective therapeutic strategy for bone tissue engineering and therefore have attracted significant research interest. This review examines the advantages of copper-based biomaterials for biological functions and introduces these materials’ antibacterial mechanisms. We summarize current knowledge about the application of copper-based biomaterials with antimicrobial and osteogenic properties in the prevention and treatment of bone infection and discuss their potential uses in the field of orthopedics. By examining both broad and in-depth research, this review functions as a practical guide to developing copper-based biomaterials and offers directions for possible future work.

Silver Nanoparticle Production by the Cyanobacterium Cyanothece sp.: De Novo Manipulation of Nano-Biosynthesis by Phytohormones

Background: Numerous cyanobacteria have the potential to reduce metallic ions to form pure metal nanoparticles in a green biosynthesis process. Aim: To investigate the production capacity of silver nanoparticles by the cyanobacterium Cyanothece sp. and to examine the effect of five different phytohormones, indole acetic acid, kinetin; gibberellic acid; abscisic acid; and methyl jasmonate, on this capacity. Methods: The cyanobacterial strain was grown for 60 days and the harvested cyanobacterium biomass was incubated with 0.1 mM of AgNO₃. Percentage conversion of Ag⁺ to Ag⁰ was calculated to indicate the AgNPs’ production capacity. Different concentrations of the five phytohormones were added to cultures and the AgNP production was monitored throughout different time intervals. Results: Cyanothece sp. biosynthesized spherical AgNPs (diameter range 70 to 140 nm, average diameter 84.37 nm). The addition of indole acetic acid and kinetin provoked the maximum conversion (87.29% and 55.16%, respectively) of Ag⁺ to Ag⁰, exceeding or slightly below that of the control (56%). Gibberellic and abscisic acids failed to elevate the Ag⁺ to Ag⁰ conversion rate (45.23% and 47.95%, respectively) above that of the control. Methyl jasmonate increased the Ag⁺ to Ag⁰ conversion rate to 90.29%, although nearly all the cyanobacterial cultures died at the end. Conclusion: Phytohormones could be used to induce or inhibit the green production of AgNPs with the cyanobacterium Cyanothece sp. This novel manipulation technique may have several applications in agriculture or biomedicine.

In Vivo Effects of Silver Nanoparticles on Development, Behavior, and Mitochondrial Function are Altered by Genetic Defects in Mitochondrial Dynamics

Silver nanoparticles (AgNPs) are extensively used in consumer products and biomedical applications, thus guaranteeing both environmental and human exposures. Despite extensive research addressing AgNP safety, there are still major knowledge gaps regarding AgNP toxicity mechanisms, particularly in whole organisms. Mitochondrial dysfunction is frequently described as an important cytotoxicity mechanism for AgNPs; however, it is still unclear if mitochondria are the direct targets of AgNPs. To test this, we exposed the nematodeCaenorhabditis elegans to sublethal concentrations of AgNPs and assessed specific mitochondrial parameters as well as organismal-level endpoints that are highly reliant on mitochondrial function, such as development and chemotaxis behavior. All AgNPs tested significantly delayed nematode development, disrupted mitochondrial bioenergetics, and blocked chemotaxis. However, silver was not preferentially accumulated in mitochondria, indicating that these effects are likely not due to direct mitochondria-AgNP interactions. Mutant nematodes with deficiencies in mitochondrial dynamics displayed both greater and decreased susceptibility to AgNPs compared to wild-type nematodes, which was dependent on the assay and AgNP type. Our study suggests that AgNPs indirectly promote mitochondrial dysfunction, leading to adverse outcomes at the organismal level, and reveals a role of gene-environment interactions in the susceptibility to AgNPs. Finally, we propose a novel hypothetical adverse outcome pathway for AgNP effects to guide future research.

Simultaneous Influence of Gradients in Natural Organic Matter and Abiotic Parameters on the Behavior of Silver Nanoparticles in the Transition Zone from Freshwater to Saltwater Environments

As nanoparticles have been found to cause a range of harmful impacts in biota, understanding processes and transformations which may stabilize and increase their persistence time in the environment are of great importance. As nanoparticles carried in riverine or wastewaters will eventually reach estuaries, understanding their behavior and transport potential in this transition zone from fresh to marine waters is essential, particularly as estuaries are sensitive ecological zones, oftentimes encompassing ornithologically important areas. In this direction, we report on the influence of combined gradients of riverine and marine natural organic matter (NOM) on the temporal stability of biocorona-encapsulated silver nanoparticles in terms of ion release kinetics. In parallel, salinity, pH and oxygen saturation were simultaneously varied to create a model to mimic the complex estuarine environment. While humic acid (HA) and alginate (Alg) disrupted the stabilizing ability of the nanoparticle protein corona to a greater and lesser degree, respectively, they slowed the rate of ion release in freshwater at pH 6.6 and in saltwater at pH 8, respectively, while oxygen saturation was also found to be an important factor. Thus, as the type of NOM changes with pH along a salinity gradient in an estuary, conditions required to increase the persistence time of nanoparticles are serendipitously met, with greater colloidal stability achieved in cases where there is more rapid replacement of HA with Alg. Despite the strong gradients in ionic strength, pH and oxygen saturation, the protein corona was not sufficiently disrupted at the nanoparticle surface to be substituted by NOM indicating the greater adsorption energy of the protein's hydrophobic domains. Ultimately, it is the specific NOM profile of individual estuaries that may provide the best indicator for predicting the stability and persistence of silver nanoparticles as they transition from fresh to salt water environments.

Exacerbation of Thrombotic Responses to Silver Nanoparticles in Hypertensive Mouse Model

With advent of nanotechnology, silver nanoparticles, AgNPs owing majorly to their antibacterial properties, are used widely in food industry and biomedical applications implying human exposure by various routes including inhalation. Several reports have suggested AgNPs induced pathophysiological effects in a cardiovascular system. However, cardiovascular diseases such as hypertension may interfere with AgNPs-induced response, yet majority of them are understudied. The aim of this work was to evaluate the thrombotic complications in response to polyethylene glycol- (PEG-) coated AgNPs using an experimental hypertensive (HT) mouse model. Saline (control) or PEG-AgNPs (0.5 mg/kg) were intratracheally (i.t.) instilled four times, i.e., on days 7, 14, 21, and 28 post-angiotensin II-induced HT, or vehicle (saline) infusion. On day 29, various parameters were assessed including thrombosis in pial arterioles and venules, platelet aggregation in whole blood in vitro, plasma markers of coagulation, and fibrinolysis and systemic oxidative stress. Pulmonary exposure to PEG-AgNPs in HT mice induced an aggravation of in vivo thrombosis in pial arterioles and venules compared to normotensive (NT) mice exposed to PEG-AgNPs or HT mice given saline. The prothrombin time, activated partial thromboplastin time, and platelet aggregation in vitro were exacerbated after exposure to PEG-AgNPs in HT mice compared with either NT mice exposed to nanoparticles or HT mice exposed to saline. Elevated concentrations of fibrinogen, plasminogen activator inhibitor-1, and von Willebrand factor were seen after the exposure to PEG-AgNPs in HT mice compared with either PEG-AgNPs exposed NT mice or HT mice given with saline. Likewise, the plasma levels of superoxide dismutase and nitric oxide were augmented by PEG-AgNPs in HT mice compared with either NT mice exposed to nanoparticles or HT mice exposed to saline. Collectively, these results demonstrate that PEG-AgNPs can potentially exacerbate the in vivo and in vitro procoagulatory and oxidative stress effect in HT mice and suggest that population with hypertension are at higher risk of the toxicity of PEG-AgNPs.

Cancer Therapy by Silver Nanoparticles: Fiction or Reality?

As an emerging new class, metal nanoparticles and especially silver nanoparticles hold great potential in the field of cancer biology. Due to cancer-specific targeting, the consequently attenuated side-effects and the massive anti-cancer features render nanoparticle therapeutics desirable platforms for clinically relevant drug development. In this review, we highlight those characteristics of silver nanoparticle-based therapeutic concepts that are unique, exploitable, and achievable, as well as those that represent the critical hurdle in their advancement to clinical utilization. The collection of findings presented here will describe the features that distinguish silver nanoparticles from other anti-cancer agents and display the realistic opportunities and implications in oncotherapeutic innovations to find out whether cancer therapy by silver nanoparticles is fiction or reality.

Assessment of the Therapeutic Efficacy of Silver Nanoparticles against Secondary Cystic Echinococcosis in BALB/c Mice

Background: Cystic echinococcosis (CE) is a highly prevalent parasitic disease resulting from the hydatid cyst of Echinococcus granulosus. It is also described as a zoonotic disease and considered a neglected tropical infection. Aim: This study assessed the antiparasitic activity of silver nanoparticles (AgNPs), against E. granulosus infection in BALB/c mice. Methods: The green synthesis of AgNPs was accomplished using Zizyphus spina-christi leaves. AgNPs were orally administered to BALB/c mice for acute short-term toxicity evaluation, in doses of 50 mg, 100 mg, 200 mg, and 300 mg/kg, and observations for toxic signs were carried out at 24, 48 h, and 14 days, continuously. Moreover, a total of 20 mice divided into two groups were intraperitoneally administered with 1500 viable protoscoleces for secondary hydatidosis infection. Results: The results showed that AgNPs did not induce any adverse effects or signs and no death, in either group of mice. The histopathological findings in the liver, kidneys, and intestine of the mice administered with AgNPs revealed mild histological effects compared with the control ones. The treated-infected mice showed a change in the appearance of the liver hydatid cysts from hyaline to milky cloudy compared with the untreated infected mice. Conclusion: Biosynthesized AgNPs showed anti-hydatic effects and are suggested as anti-echinococcal cyst treatment.

Evaluation of silver nanoparticles in cosmeceutical and potential biosafety complications

Silver nanoparticles are well received in the cosmeceutical industry due to their broad spectrum of pharmacology applications. Research on the therapeutic properties exhibited by silver nanoparticles revealed that the antimicrobial and anti-inflammatory properties are the main attraction in the establishment of nanocosmeceutical products whereby their mechanisms of action are reviewed in this paper. In addition, studies on other uses of silver nanoparticles acknowledged that the particles act as antifungal agents in nail polishes and pigments in coloured beauty products such as lipsticks and eye shadows. Despite the extensive use of silver nanoparticles in the cosmetic line, there are still limited resources on the mechanism of actions and the effect of the particles on the bio-functionality of the body. The safety of silver nanoparticles could be comprehended from their skin penetration ability and toxicity to the human body in which it could be justified that both features are mainly influenced by the morphology of the particles and the method of application. This article summarizes exclusively on the synthesis of silver nanoparticles, the biomedical mechanisms and applications as well the limitations with respect to skin penetration ability and toxicity effects which will contribute significantly to the vast research on the association of nanotechnology and cosmetics.

Synthesis approach-dependent antiviral properties of silver nanoparticles and nanocomposites

Numerous viral infections are common among humans, and some can lead to death. Even though conventional antiviral agents are beneficial in eliminating viral infections, they may lead to side effects or physiological toxicity. Silver nanoparticles and nanocomposites have been demonstrated to possess inhibitory properties against several pathogenic microbes, including archaea, bacteria, fungi, algae, and viruses. Its pronounced antimicrobial activity against various microbe-mediated diseases potentiates its use in combating viral infections. Notably, the appropriated selection of the synthesis method to fabricate silver nanoparticles is a major factor for consideration as it directly impacts antiviral efficacy, level of toxicity, scalability, and environmental sustainability. Thus, this article presents and discusses various synthesis approaches to produce silver nanoparticles and nanocomposites, providing technological insights into selecting approaches to generate antiviral silver-based nanoparticles. The antiviral mechanism of various formulations of silver nanoparticles and the evaluation of its propensity to combat specific viral infections as a potential antiviral agent are also discussed.

Mucoadhesive silver nanoparticle-based local drug delivery system for peri-implantitis management in COVID-19 era. Part 1: antimicrobial and safety in-vitro analysis

BACKGROUND

Pseudomonas aeruginosa, a major respiratory pathogen, has been isolated from peri-implant sites and is associated with dental implant failure. This in-vitro study (part 1) aimed to fabricate a novel mucoadhesive silver nanoparticle-based local drug delivery chip, evaluate its antimicrobial efficacy against P. aeruginosa, and its safety for the treatment of peri-implantitis.

MATERIALS AND METHODS

Silver nanoparticles were synthesized and characterized using a transmission electron microscope (TEM). The local drug delivery chip was fabricated using gelatin, glycerol, silver nanoparticle solution (2.5 μg/ml, 5 μg/ml, 7.5 μg/ml, and 10 μg/ml), glutaraldehyde, and sodium alginate solution. These chips were evaluated for physical parameters, effect on viability of murine macrophage cell line J774A.1, and antimicrobial activity (using Kirby-Bauer disc diffusion method with 18 h incubation period) against P. aeruginosa ATCC 27853.

RESULTS

Silver nanoparticle antimicrobial chip exhibited dimensions of 4 mm × 5 mm x 0.4 mm, 5.8 mg weight, pH 5-6, folding endurance 1.04, and one-year stability. P. aeruginosa was susceptible to ≥ 7.5 μg/ml concentration of silver nanoparticles (spherical shape with particle size ranging from 10 to 100 nm). Murine macrophage cells exhibited 93% viability after 24 h incubation with silver nanoparticle chips.

CONCLUSION

The novel silver nanoparticle chip showed dimensional stability, minimal effect on murine macrophage cell viability, and significant antimicrobial activity against P. aeruginosa. With the further establishment of its effective dosage and safety, this chip could be used as an adjunct to mechanical debridement (as a non-aerosol generating procedure) in treating peri-implantitis, especially during the ongoing coronavirus disease 2019 (COVID-19) pandemic.

Green synthesis of silver nanoparticles and evaluation of their anti-bacterial activities: use of Aloe barbadensis miller and Ocimum tenuiflorum leaf extracts

The presence of various phytochemicals makes the leaf extract-based green synthesis advantageous to other conventional methods, as it facilitates the production of non-toxic by-product. In the present study, leaf extracts from two different plants: Aloe barbadensis miller and Ocimum tenuiflorum, were used to synthesise Ag nanoparticles. The absorbance at 419-432 nm from UV-visible spectroscopy indicates the formation of Ag in the synthesised samples. The effect of precursors’ concentration on the stability, size and shape of the synthesised samples has also been investigated at constant heating temperature, stirring time, and the pH of the solution. The TEM results showed that all the synthesised samples of nanoparticles demonstrated stability with a size range of 7-70 and 9-48 nm with Aloe barbadensis miller and Ocimum tenuiflorum leaf extracts, respectively. The formation of smaller Ag nanoparticles due to utilisation of different precursor concentration and leaf extracts was also explained. The synthesised samples’ anti-bacterial activity was examined against the pathogens, Bacillus subtilis, Staphylococcus aureus, and Escherichia coli. In general, the green synthesis approach established a prospective for developing highly stable Ag nanoparticles with rigid particle shape/size distribution from different leaf extracts for the development of better anti-bacterial agents.

Combining antibiotics with silver nanoparticles: A potential treatment strategy against antimicrobial resistance

Growing resistance to currently approved antibiotics is posing serious concern worldwide. The multidrug-resistant organisms are a major cause of mortality and morbidity around the globe. The limited options to treat infections caused by resistant organism requires alternative strategies to increase the effectiveness of antibiotic for better clinical outcomes. Recent advances in nanotechnology have enabled the drugs to be used in nanoscale to increase the effectiveness of antibiotics. The use of nanoparticles to treat infectious diseases has a long history in the pharmaceutical market, and the versatility of these particles to incorporate various materials as carriers make it an attractive option to combat the current crisis of emerging antibacterial resistance. Silver, a metal with many medical applications, has inherent antimicrobial properties. Therefore, silver NPs are appearing as one of the best options to be used in combination with antibiotics to increase effectiveness against resistant bacteria. Here, we discuss the applications and mechanisms of silver NPs to treat microbial resistance in light of recent research.

Antibacterial and cytotoxic activity of metronidazole and levofloxacin composites with silver nanoparticle

The aim of the work is to to ascertain their antibacterial activity, as well as the toxic effects toward human cells of composites of silver nanoparticles immobilized by electron-beam technology onto crystals of antimicrobial agents metronidazole and levofloxacin

The assessment of antibacterial activity and cytotoxic action of silver naonparticled metronidazole and levofloxacin composites was carried out using the MTT-test. Objects of study of antibacterial activity were three strains of microorganisms: Staphylococcus aureus ATCC25923, Escherichia coli dH5α, Pseudomonas aeruginosa ATCC9027. For the investigation of cytotoxic action, cells of HEK 293 line obtained from human kidney embryos were used. Nanocomposites of metronidazole and levofloxacin were tested at concentrations known as the minimum toxic dose of antibiotics and at concentrations reduced/increased in 2 times.

Immobilization of silver nanoparticles on the surface of metronidazole and levofloxacin by electron-beam technology gives a different effect on their antibacterial and cytotoxic activity. Nanocomposites of metronidazole exhibit a weaker antibacterial effect on E. coli than metronidazole alone, while levofloxacin nanocomposites have higher antibacterial activity compared to levofloxacin alone. Nanocomposites of the levofloxacin, compared to free levofloxacin, are characterized by a higher antibacterial effect towards gram-negative bacteria (E. coli), but practically do not differ in activity toward P. aeruginosa and S. aureus. Immobilization of silver nanoparticles on metronidazole crystals does not affect on its cytotoxicity relative to pseudonormal human cells line HEK 293, while the nanocomposites of levofloxacin with silver are more toxic to these cells than levofloxacin alone.