Multicenter Metal-Organic Framework-Based Ratiometric Fluorescent Sensors

Two Metal-Organic Frameworks Based on Hexanuclear Cobalt-Hydroxyl Clusters or a Manganese-Hydroxyl Chain from Triangular [MII3(μ3-OH)] (M = Co and Mn) Units: Antiferromagnetic and Spin-Canting Antiferromagnetic Ordering with Soft-Magnetic Behavior

Three-dimensional highly connected isonicotinic acid-base metal-organic frameworks (MOFs), [Co^II₆(μ₃-OH)₂(in)₇(HCOO)₃H₂O]·4DMF (1) and [Mn^II₃(μ₃-OH)(in)₃(CH₃COO)₂] (2) (Hin = isonicotinic acid), have been successfully prepared. Compounds 1 and 2 were constructed from planar Co₆ cluster SBUs or rare 1D manganese-hydroxyl chain SBUs, respectively. Both SBUs contain triangular M^II₃(OH) (M = Co and Mn) central units, which are connected by rare syn,anti,syn,anti- and syn,syn,anti-coordinated formic acid or acetic acid. Both compounds 1 and 2 have good thermal stability, while compound 2 also exhibits an extraordinarily high moisture stability. Magnetic studies demonstrate that 1 shows antiferromagnetic behavior, and 2 exhibits spin-canting antiferromagnetic ordering with soft-magnetic behavior.

Carbon dots based ratiometric fluorescent sensing platform for food safety

Food safety has become a major global concern and the rapid detection of food nutritional ingredients and contaminants has aroused much more attention. Nanomaterials-based fluorescent sensing holds great potential in designing highly sensitive and selective detection strategies for food safety analysis. Carbon dots (CDs) possess tremendous prospects in fluorescent sensing food ingredients and contaminants due to their superior properties of chemical and photostability, highly fluorescence with tunability, and no/low-toxicity. Numerous endeavors are demanded to contribute to overcoming the challenge of lower sensitivity and selectivity of the sensors interfered by various components in intricate food matrices to ensure food safety and human health. Nanohybrid CDs based ratiometric fluorescent sensing with self-calibration is regarded as an efficient strategy for the CDs based sensors for the specific recognition of target analyte in the food matrices. This work is devoted to reviewing the development of nanohybrid CDs based ratiometric fluorescent sensing platform and the perspectives of the platform for food safety. The applications of nanohybrid CDs in sensing are summarized and the sensing mechanisms are briefly discussed.

A nanoprobe for ratiometric imaging of glutathione in living cells based on the use of a nanocomposite prepared from dual-emission carbon dots and manganese dioxide nanosheets

A ratiometric fluorescence assay for glutathione (GSH) was developed. The novel assay is based on a nanoprobe composed of manganese dioxide nanosheets (MnO₂ NS) and dual-emission carbon dots (de-CDs) with intrinsic GSH-response property. After construction of the nanoprobe, two emission peaks of de-CDs were suppressed to varying degrees by MnO₂ NS. The suppression was relieved and the two emission peaks recovered proportionally when MnO₂ NS was decomposed by GSH, thus realizing the ratiometric assay for micromolar GSH. The intrinsic responsiveness of de-CDs to millimolar GSH broadens the analytical range of the nanoprobe. An appropriate precursor, calcon-carboxylic acid, was screened out to synthesize de-CDs via one-step hydrothermal treatment. The de-CD@MnO₂ NS nanoprobe can measure GSH concentrations through the fluorescence intensity ratio between 435 and 516 nm excited at 365 nm. The range of response was from 1 μM to 10 mM and the detection limit reached 0.6 μM (3σ criterion). Benefiting from its good biocompatibility, the proposed nanoprobe has excellent applicability for intracellular GSH imaging.Graphical abstract Schematic representation of glutathione (GSH) ratiometric detection. The nanoprobe is prepared from dual-emission carbon dots (de-CDs) and manganese dioxide nanosheets (MnO₂ NS). GSH removes quenching effect by decomposing MnO₂ NS and induces intrinsic response of de-CDs, which realizes ratiometric detection.

A Green-Emission Metal-Organic Framework-Based Nanoprobe for Imaging Dual Tumor Biomarkers in Living Cells

The modular nature of metal-organic frameworks (MOFs) permits their tunable structure and function for target application, such as in biomedicine. Herein, a green-emission Zr(IV)-MOF (BUT-88) was constructed from a customized luminescent carbazolyl ligand. BUT-88 represents the first bcu-type MOF with both organic linker and metal node in eight connections and shows medium-sized pores, rich accessible linking sites, and good water stability and biocompatibility. In virtue of these merits, BUT-88 was then fabricated into a MOF-based fluorescent nanoprobe, drDNA-BUT-88. Using it, the live-cell imaging of dual tumor biomarkers was achieved for the first time upon a MOF-based probe, offering enhanced detection precision in early cancer diagnosis. Particularly, the probe showed efficient ratiometric fluorescent sensing toward the cytoplasmic biomarker microRNA-21, further improving the detection accuracy at the cellular level. In this work, the elaborate combination of MOF engineering and the fluorescent detection technique has contributed a facile biosensing platform, unlocking more possibilities of MOF chemistry.

Microorganism@UiO-66-NH2 Composites for the Detection of Multiple Colorectal Cancer-Related microRNAs with Flow Cytometry

High-throughput analyses of multitarget markers can facilitate rapid and accurate clinical diagnosis. Suspension array assays, a flow cytometry-based analysis technology, are among some of the most promising multicomponent analysis methods for clinical diagnostics and research purposes. These assays are appropriate for examining low-volume, complex samples having trace amounts of analytes due to superior elimination of background. Physical shape is an important and promising code system, which uses a set of visually distinct patterns to identify different assay particles. Here, we presented a morphology recognizable suspension arrays based on the microorganisms with different morphologies. In this study, UiO-66-NH₂ (UiO stands for University of Oslo) metal-organic frameworks (MOFs), was wrapped on the microorganism surface to form an innovative class of microorganism@UiO-66-NH₂ composites for suspension array assays. The use of microorganisms endowed composites barcoding ability with their different morphology and size. Meanwhile, the UiO-66-NH₂ provided a stable rigid shell, large specific surface area, and metal(IV) ions with multiple binding sites, which could simplify the protein immobilization procedure and enhance detection sensitivity. With this method, simultaneous detection of three colorectal cancer-related microRNA (miRNA), including miRNA-21, miRNA-17, and miRNA-182, could be easily achieved with femtomolar sensitivity by using a commercial flow cytometer. The synergy between microorganisms and MOFs make the composites a prospective barcoding candidate with excellent characteristics for multicomponent analysis, offering great potential for the development of high throughput and accurate diagnostics.

Luminescent lanthanide metal-organic framework nanoprobes: from fundamentals to bioapplications

Metal-organic frameworks (MOFs), a unique type of porous material characterized by high porosity, large internal surface area and remarkable structural tunability, have emerged as very attractive functional materials for a variety of applications. As a promising subclass of MOFs, lanthanide metal-organic frameworks (Ln-MOFs) integrate the unique advantages of MOFs and the intrinsic features of lanthanide ions, such as sharp emission bands, long luminescent lifetimes, large Stokes shifts, high color purity and high resistance to photobleaching. In this minireview, we provide a brief overview of the most recent advances in luminescent Ln-MOF nanoprobes, which covers from their chemical and physical fundamentals to bioapplications, including their synthetic strategies, optical properties and promising bioapplications in biodetection, bioimaging and therapy. Finally, some of the most important emerging trends and future efforts toward this rapidly evolving field are also envisioned.

Ligand engineering to achieve enhanced ratiometric oxygen sensing in a silver cluster-based metal-organic framework

Ratiometric luminescent oxygen sensing based on dual fluorescence and phosphorescence emission in a single matrix is highly desirable, yet the designed synthesis remains challenging. Silver-chalcogenolate-cluster-based metal-organic frameworks that combine the advantages of silver clusters and metal-organic frameworks have displayed unique luminescent properties. Herein, we rationally introduce -NH₂ groups on the linkers of a silver-chalcogenolate-cluster-based metal-organic framework (Ag₁₂bpy-NH₂) to tune the intersystem crossing, achieving a dual fluorescence-phosphorescence emission from the same linker chromophore. The blue fluorescence component has a 100-nm gap in wavelength and 8,500,000-fold difference in lifetime relative to a yellow phosphorescence component. Ag₁₂bpy-NH₂ quantifies oxygen during hypoxia with the limit of detection of as low as 0.1 ppm and 0.3 s response time, which is visualized by the naked eye. Our work shows that metal cluster-based MOFs have great potential in luminescent sensing, and the longer-lived charge-separated states could find more photofunctional applications in solar energy transformation and photocatalysis.

A dual emission metal-organic framework for rapid ratiometric fluorescence detection of CO3 2- in seawater

A dual emission metal-organic framework (IRMOF-10-Eu) was prepared and used as a ratiometric fluorescent sensor for CO₃ ^2- detection. IRMOF-10-Eu had good stability and excellent luminescence in aqueous solution. IRMOF-10-Eu showed dual fluorescence emission from the ligand and Eu³⁺ with single excitation. Upon treatment with CO₃ ^2-, the fluorescence ratio (I ₆₂₄/I ₃₅₈) of the probe displayed significant change. The relative fluorescence intensity ratio (I ₆₂₄/I ₃₅₈) and CO₃ ^2- concentration had a linear relationship in 50-300 μM range with a low detection limit of 9.58 μM. And the luminescence probe of CO₃ ^2- showed a fast detection time. The possible mechanism was investigated. CO₃ ^2- changed the structure of IRMOF-10-Eu and interrupted the energy transfer process. Thus, the fluorescence emission intensity of the ligand was increased and Eu³⁺ was decreased with the addition of CO₃ ^2-. IRMOF-10-Eu was used to detect CO₃ ^2- in seawater, which showed good prospect in practical application. Subsequently, a highly selective and sensitive probe, IRMOF-10-Eu, may pave an efficient way for CO₃ ^2- detection in seawater.

Water Stable Zn(II) Metal-Organic Framework as a Selective and Sensitive Luminescent Probe for Fe(III) and Chromate Ions

Sensing and monitoring toxic contaminants like Fe³⁺, CrO₄^2-, and Cr₂O₇^2- ions in water is very important due to their harmful effects on biological and environmental systems. Enhanced hydrolytic stability, sensitivity, and selectivity, in addition to their excellent luminescence properties, are important attributes of metal-organic framework (MOF)-based sensors for sensing applications. In this work, the water stable Zn-MOF [Zn₂(tpeb)(bpdc)₂] (where tpeb = 1,3,5-tri-4-pyridyl-1,2-ethenylbenzene and bpdc = biphenyl-4,4'-dicarboxylic acid) was synthesized and characterized. The framework retains its crystallinity and structural integrity in harsh acidic and basic conditions (pH 4-11). Most interestingly, the Zn-MOF demonstrates a strong blue luminescence in water that can be quenched selectively only by contaminants like Fe³⁺, CrO₄^2-, and Cr₂O₇^2- ions. Higher K_sv values and low detection limits in selective luminescence quenching confirm the superior sensing performance, which is comparable to those of contemporary materials. Furthermore, in all cases, quenching efficiency remains unaltered in the presence of interfering ions, even after the compound is used in multiple cycles, which makes this MOF an attractive, reliable, and recyclable luminescent sensor material. The luminescence quenching mechanism is based on the competitive absorption and weak interactions. It is worth noting that most of the reported MOF-based sensors used for the separate sensing of Fe(III) and chromate ions are used in organic media due to their poor hydrolytic stabilities. Reports on the dual sensing of Fe(III) and chromate ions, which are also in aqueous media, are rare. Based on these results, Zn-MOF can be considered as a suitable candidate for advanced practical applications for the efficient sensing of Fe(III) and chromate ions in water.

Highly Stable Lanthanide Metal-Organic Framework as an Internal Calibrated Luminescent Sensor for Glutamic Acid, a Neuropathy Biomarker

Glutamic acid (Glu) is the most abundant excitatory neurotransmitter in the central nervous system, and an elevated level of Glu may indicate some neuropathological diseases. Herein, three isomorphic microporous lanthanide metal-organic frameworks (MOFs) [(CH₃)₂NH₂]₂[Ln₆(μ₃-OH)₈(BDC-OH)₆(H₂O)₆]·(solv)_x (ZJU-168; ZJU = Zhejiang University, H₂BDC-OH = 2-hydroxyterephthalic acid, Ln = Eu, Tb, Gd) were designed for the detection of Glu. ZJU-168(Eu) and ZJU-168(Tb) suspensions simultaneously produce the characteristic emission bands of both lanthanide ions and ligands. When ZJU-168(Eu) and ZJU-168(Tb) suspensions exposed to Glu, the fluorescence intensity of ligands increases while the emission of lanthanide ions is almost unchanged. By utilizing the emission of ligands as the detected signal and the emission of lanthanide ions as the internal reference, an internal calibrated fluorescence sensor for Glu was obtained. There is a good linear relationship between fluorescence intensity ratio and Glu concentration in a wide range with the detection limit of 3.6 μM for ZJU-168(Tb) and 4.3 μM for ZJU-168(Eu). Major compounds present in blood plasma have no interference for the detection of Glu. Furthermore, a convenient analytical device based on a one-to-two logic gate was constructed for monitoring Glu. These establish ZJU-168(Tb) as a potential turn-on, ratiometric, and colorimetric fluorescent sensor for practical detection of Glu.

Micron-Sized Ultrathin Metal-Organic Framework Sheet

The two-dimensional thin metal-organic frameworks (MOF) sheet has emerged as a promising hybrid material for applications in catalysis and optoelectronic devices. However, the small size and large thickness of an MOF sheet still pose barriers toward its potential applications. Herein, a micron-sized ultrathin MOF sheet is synthesized with the assistance of benzoic acid. Benzoic acid promoted the coordination of the porphyrin center with copper ions, reduced H-stacking and J-aggregation between the layers, and induced anisotropic growth of the MOF sheet. The results reveal the growth mechanism and provide a viable method for the synthesis of ultrathin MOF sheet. The as-prepared micron-sized ultrathin MOF sheet has good dispersion and high stability, which can ensure the long-term application properties of this material. The ultrathin thickness in combination with its micron size can make MOF as useful as graphene in practical applications. The synthesis of a micron-sized ultrathin MOF sheet similar to the thickness of graphene can pave the way for effective applications of two-dimensional MOF materials.

Structure Engineering of a Lanthanide-Based Metal-Organic Framework for the Regulation of Dynamic Ranges and Sensitivities for Pheochromocytoma Diagnosis

Exploring innovative technologies to precisely quantify biomolecules is crucial but remains a great challenge for disease diagnosis. Unfortunately, the humoral concentrations of most biotargets generally vary within rather limited scopes between normal and pathological states, while most literature-reported biosensors can detect large spans of targets concentrations, but are less sensitive to small concentration changes, which consequently make them mostly unsatisfactory or even unreliable in distinguishing positives from negatives. Herein, a novel strategy of precisely quantifying the small concentration changes of a certain biotarget by editing the dynamic ranges and sensitivities of a lanthanide-based metal-organic framework (Eu-ZnMOF) biosensor is reported. By elaborately tailoring the biosensor's structure and surface areas, the tunable Eu-ZnMOF is developed with remarkably enhanced response slope within the "optimized useful detection window," enabling it to serve as a powerful signal amplifier (87.2-fold increase) for discriminating the small concentration variation of urinary vanillylmandelic acid (an early pathological signature of pheochromocytoma) within only three times between healthy and diseased subjects. This study provides a facile approach to edit the biosensors' performances through structure engineering, and exhibits promising perspectives for future clinical application in the non-invasive and accurate diagnosis of severe diseases.

Bimetallic metal-organic frameworks and their derivatives

Bimetallic metal-organic frameworks (MOFs) have two different metal ions in the inorganic nodes. According to the metal distribution, the architecture of bimetallic MOFs can be classified into two main categories namely solid solution and core-shell structures. Various strategies have been developed to prepare bimetallic MOFs with controlled compositions and structures. Bimetallic MOFs show a synergistic effect and enhanced properties compared to their monometallic counterparts and have found many applications in the fields of gas adsorption, catalysis, energy storage and conversion, and luminescence sensing. Moreover, bimetallic MOFs can serve as excellent precursors/templates for the synthesis of functional nanomaterials with controlled sizes, compositions, and structures. Bimetallic MOF derivatives show exposed active sites, good stability and conductivity, enabling them to extend their applications to the catalysis of more challenging reactions and electrochemical energy storage and conversion. This review provides an overview of the significant advances in the development of bimetallic MOFs and their derivatives with special emphases on their preparation and applications.

In Vivo Spectral Distortions of Infrared Luminescent Nanothermometers Compromise Their Reliability

Luminescence nanothermometry has emerged over the past decade as an exciting field of research due to its potential applications where conventional methods have demonstrated to be ineffective. Preclinical research has been one of the areas that have benefited the most from the innovations proposed in the field. Nevertheless, certain questions concerning the reliability of the technique under in vivo conditions have been continuously overlooked by most of the scientific community. In this proof-of-concept, hyperspectral in vivo imaging is used to explain how unverified assumptions about the thermal dependence of the optical transmittance of biological tissues in the so-called biological windows can lead to erroneous measurements of temperature. Furthermore, the natural steps that should be taken in the future for a reliable in vivo luminescence nanothermometry are discussed together with a perspective view of the field after the findings here reported.

Discrimination of Various Amine Vapors by a Triemissive Metal-Organic Framework Composite via the Combination of a Three-Dimensional Ratiometric Approach and a Confinement-Induced Enhancement Effect

Multiemissive sensors are being actively pursued, because of their ratiometric luminescent detection capabilities, which demonstrates better sensitivity and selectivity than conventional single-emission sensors. Herein, we present a trichromatic white-light-emitting metal-organic framework (MOF) composite (Z3) by simultaneously incorporating red/green-emitting Pt/Ru complex cations into porous blue-emitting bio-MOF-1 through post-synthetic modification. With the help of a three-dimensional (3-D) dual-ratiometric luminescence recognition method, and unique turn-on responses of the red emission toward amine compounds (ACs), including NH₃ and aliphatic amines, via confinement-induced luminescence enhancement effect, Z3 can work as a dual-ratiometric luminescent sensor for discrimination of 7 out of 11 AC vapors. This work not only provides a new AC sensing mechanism (confinement effect) that can induce a "turn-on" response but also proves that the accuracy and selectivity of composite sensor can be greatly improved through the combination of 3-D recognition method and the confinement effect. Thus, it open up fresh opportunities to develop composite sensors with excellent sensing and differentiating ability.

Metal-Organic Frameworks with Multiple Luminescence Emissions: Designs and Applications

Emissive species are powerful for luminescent detection with high sensitivity and simple procedure and for light-emitting diode (LED) lighting because of their high efficiency, long lifetime, and low energy consumption. Here we propose the concept of multiple luminescence emissions from a single matrix or species under single-wavelength excitation. Multiemission not only realizes the high sensitivity of luminescence sensing but also possesses the capacity of self-reference for environment-free interferences. The color change is also convenient for visible detection. In multiemission species, every emissive center responds to a specific analyte to improve the efficiency for multiple-target detection. Multiemission also extends the applications to anticounterfeiting, colorful LEDs, and information storage. To date, it is still challenging to combine more than one type of emissive center in a single matrix or species. Obtaining multiemission under single-wavelength excitation also needs exquisite design. Metal-organic frameworks (MOFs) are porous hybrid assemblies prepared with metal ions and organic ligands. Metal nodes and ligands with large π-conjugated systems have the potential for the construction of luminescent MOFs. Abundant and diverse precursors provide the possibility to prepare MOFs with multiple luminescence emissions. The pores or channels of MOFs also act as hosts to encapsulate luminescent guest species as additional emissive sites. In this Account, we propose the concept of multiple-luminescence MOFs (ML-MOFs) and summarize the recent research progress on their designs, constructions, and applications reported by our group and others. ML-MOFs are MOFs that possess more than one emissive center under single-wavelength excitation. Six different kinds of construction strategies of ML-MOFs are introduced: (1) multiemission from both metal nodes and ligands in single MOFs; (2) use of mixed-metal nodes as multiemission centers in single MOFs; (3) combination of different emissive MOFs as a whole to achieve multiemission application; (4) host-guest emissions from emissive MOFs after encapsulation of luminescent guest species; (5) organization of different emissive ligands in a single MOF for multiemission; and (6) use of single ligands exhibiting dual emission to prepare ML-MOFs. We also discuss the mechanisms that realize multiple emissions from MOFs under single-wavelength excitation, such as the antenna effect and excited-state intramolecular proton transfer. The applications of ratiometric sensing, LED lighting, anticounterfeiting, and information storage are summarized. With this Account, we hope to spark new ideas and to inspire new endeavors in the design and construction of ML-MOFs, especially with postsynthetic techniques such as postsynthetic modification, postsynthetic exchange, and postsynthetic deprotection, to promote the applications of MOFs in sensing, lighting, information storage, and others.

Linker-Eliminated Nano Metal-Organic Framework Fluorescent Probe for Highly Selective and Sensitive Phosphate Ratiometric Detection in Water and Body Fluids

Phosphate is an important anion in both the aquatic environment and biological systems. The search for a selective and sensitive phosphate ratiometric fluorescent probe to quantify the phosphate level in water samples and body fluids is of great significance for the protection of the ecological environment and human health. Here, a porphyrin-based nano metal-organic framework (NMOF), PCN-224, was successfully exploited as a simple but highly sensitive and selective single-component ratiometric fluorescent probe with accurate composition and measurable structure for the quantitative determination of phosphate, based on the interesting double-emission fluorescence of the porphyrin ligand itself. Compared with other zirconium-based NMOF probes for phosphate, the reduced number of connections for ZrO clusters with the ligand in PCN-224 obtained by a linker-elimination strategy simultaneously provides more active recognition sites for phosphate, which effectively improves the sensitivity of the zirconium-based NMOF probes. The detection limit of the probe is only 54 nM. Additionally, the accuracy of the ratiometric detection based on this probe was further proved by the detection of phosphate in human serum and drinking water.

A water-stable terbium metal–organic framework with functionalized ligands for the detection of Fe3+ and Cr2O72− ions in water and picric acid in seawater

A novel Tb-MOF-A was fabricated by functionalized ligands and Tb³⁺, which displays high fluorescence, water stability up to 21 days and rapid, cyclic, simultaneous detection of Fe³⁺, Cr₂O₇²⁻ ions in water and picric acid in seawater.

First Ln-MOF as a trifunctional luminescent probe for the efficient sensing of aspartic acid, Fe3+ and DMSO

The first Ln-MOF (Tb-MOF) as a trifunctional luminescent probe for the efficient sensing of aspartic acid, Fe³⁺ and DMSO was demonstrated.

A highly stable 8-hydroxyquinolinate-based metal–organic framework as a selective fluorescence sensor for Fe3+, Cr2O72− and nitroaromatic explosives

A novel 8-hydroxyquinolinate-based metal–organic framework exhibits excellent sensing performance toward Fe³⁺, Cr₂O₇²⁻ and nitroaromatic explosives.

Functional metal–organic frameworks as effective sensors of gases and volatile compounds

This review summarizes the recent advances of metal organic framework (MOF) based sensing of gases and volatile compounds.

Dual-emissive dye@MOF composite for ratiometric detection and discrimination of two isomers of tetrachlorobenzenediol

A dye@MOF composite was screened out for the ratiometric fluorescent detection and discrimination of the two isomers of tetrachlorobenzenediol.

A stable nanoscaled Zr-MOF for the detection of toxic mycotoxin through a pH-modulated ratiometric luminescent switch

A stable nanoscaled single-excitation ratiometric luminescent pH sensor (MPDB-PCN) for highly sensitive real-time detection of toxic mycotoxin (3-NPA) in complicated environments.

Lanthanide metal–organic frameworks with nitrogen functional sites for the highly selective and sensitive detection of NADPH

A series of isostructural fluorescent Ln-MOF [Ln(BPDC-xN)] (Ln = Eu/Tb, x = 0, 1, 2] probes was prepared using a nitrogen modification strategy to achieve the improved selective detection of NADPH.

A water-stable terbium metal–organic framework as a highly sensitive fluorescent sensor for nitrite

A terbium metal–organic framework was synthesized for highly sensitive nitrite detection. The mechanism of the quenching process was also studied in detail.

Design and properties of multiple-emitter luminescent metal–organic frameworks

This feature article reviews the design strategies by which multiple different emission sources could be combined for creating multi-emitter luminescent metal–organic frameworks (LMOFs).

From IR to x-rays: gaining molecular level insights on metal-organic frameworks through spectroscopy

This topical review focuses on the application of several types of spectroscopy methods to a class of solid state materials called metal organic frameworks (MOFs). MOFs are self-assembled, porous crystalline materials composed of metal cluster nodes linked through coordination bonds with organic or organometallic molecular constituents. Their unique host-guest properties make them attractive for many adsorption-based applications such as gas storage and separation, catalysis, sensing and others. While much research focuses on the development and application of these materials, fundamental studies of MOF properties and molecular level host-guest interactions behind their functionality have become a significant research direction on its own. Spectroscopy methods are now ubiquitous tools in this pursuit. This review focuses on the application of three classes of spectroscopy methods to MOF materials: vibrational, optical electronic and x-ray spectroscopies. Following brief introductions to each method that include pertinent theory and experimental considerations, we present a broad overview of the types of MOF systems that have been studied, with specific examples and important new molecular level insights highlighted along the way. The current status of spectroscopic studies of MOFs is presented at the end along with some perspectives on the future directions in this area of research.

Engineering of Nanoscale Coordination Polymers with Biomolecules for Advanced Applications

Nanoscale coordination polymers (NCPs) have shown extraordinary advantages in various research areas due to their structural diversity and multifunctionality. Recently, integration of biomolecules with NCPs received extensive attention and the formed hybrid materials exhibit superior properties over the individual NCPs or biomolecules. In this review, the state-of-the-art of approaches to engineer NCPs with different types of guest biomolecules, such as amino acids, nucleic acids, enzymes and lipids are systematically introduced. Additionally, advanced applications of these biomolecule-NCP composites in the areas of sensing, catalysis, molecular imaging and therapy are thoroughly summarized. Finally, current challenges and prospects are also discussed.

Cation-induced chirality in a bifunctional metal-organic framework for quantitative enantioselective recognition

The integration of luminescence and chirality in easy-scalable metal-organic frameworks gives rise to the development of advanced luminescent sensors. To date, the synthesis of chiral metal-organic frameworks is poorly predictable and their chirality primarily originates from components that constitute the frameworks. By contrast, the introduction of chirality into the pores of metal-organic frameworks has not been explored to the best of our knowledge. Here, we demonstrate that chirality can be introduced into an anionic Zn-based metal-organic framework via simple cation exchange, yielding dual luminescent centers comprised of the ligand and Tb³⁺ ions, accompanied by a chiral center in the pores. This bifunctional material shows enantioselectivity luminescent sensing for a mixture of stereoisomers, demonstrated for Cinchonine and Cinchonidine epimers and amino alcohol enantiomers, from which the quantitative determination of the stereoisomeric excess has been obtained. This study paves a pathway for the design of multifunctional metal-organic framework systems as a useful method for rapid sensing of chiral molecules.

A Zn(ii) metal-organic framework based on bimetallic paddle wheels as a luminescence indicator for carcinogenic organic pollutants: phthalate esters

Based on the multifunctional ligand 3-(1H-1,2,4-triazol-1-yl)isophthalic acid (H2TIA), a three-dimensional coordination polymer, namely {[Zn(TIA)]·DMA} n (Zn-1) was synthesized solvothermally. Single-crystal X-ray diffraction analyses confirmed that Zn-1 is a 3D framework composed of binuclear Zn2 paddle wheels with one-dimensional channels long the a direction. Further topological analyses revealed that MOF Zn-1 existed as a (3,6)-connected rtl binodal net {4·62}2{42·610·83}. Furthermore, the luminescence explorations indicate that complex Zn-1 is the first MOF for luminescent probing of phthalate esters (carcinogenic organic pollutants) with a high quenching-efficiency constant and low fluorescence-detection limit.

Fluorescent "Turn-on" Sensing Based on Metal-Organic Frameworks (MOFs)

Metal-organic frameworks (MOFs) have evolved as an exciting class of materials in the domain of porous materials. The unique features of these materials arise from the combined properties of metal ions/clusters and organic struts which form the building blocks of these fascinating architectures. Among other multifarious applications, MOFs have shown tremendous applications as sensory materials for a wide variety of species. The signal transduction induced mechanism in these confined nanospaces generate optical output in response to a particular analyte which can be detected by wide variety of detection techniques. Fluorometric methods of sensing is one of widely studied method over past few decades. MOF-based fluorometric detection is a key research theme developed over the past few years. In this review, we give a brief overview of the recent developments of MOFs as "turn-on" sensors for a wide range of analytes (viz. cations, anions, volatile organic compounds (VOCs), etc.).

A Bifunctional Luminescent Metal-Organic Framework for the Sensing of Paraquat and Fe3+ Ions in Water

The hydrothermal reaction of Zn²⁺ ions with a mixture of two ligands, Hcptpy and H₃ btc (Hcptpy=4-(4-carboxyphenyl)-2,2':4',4''-terpyridine; H₃ btc=1,3,5-benzenetricarboxylic acid), led to the formation of a 3D metal-organic framework (MOF) with 1D channels, [Zn₂ (cptpy)(btc)(H₂ O)]_n (1), which was structurally characterized by using single-crystal X-ray diffraction (SXRD). In MOF 1, two independent Zn²⁺ ions were interconnected by btc^3- ligands to form a 1D chain, whilst adjacent Zn²⁺ ions were alternately bridged by cptpy^- ligands to generate a 2D sheet, which was further linked by 1D chains to form a 3D framework with a new (3,3,4,4)-connected topology. Furthermore, compound 1 also exhibited excellent stability towards air and water and, more importantly, luminescence experiments indicated that it could serve as a probe for the sensitive detection of paraquat (PAQ) and Fe³⁺ ions in aqueous solution.

Near-infrared emissive Er(iii) and Yb(iii) molecular nanomagnets in metal–organic chains functionalized by octacyanidometallates(iv)

Photoluminescent single-molecule magnets are formed in lanthanide(pyrazine N,N′-dioxide) chains with octacyanidometallate(iv) coordination branches playing a crucial role in sensitized NIR emission.

[2 + 2] cycloaddition reaction and luminescent sensing of Fe3+ and Cr2O72− ions by a cadmium-based coordination polymer

A cadmium-based coordination polymer can produce the corresponding photoproduct via [2 + 2] cycloaddition reaction, and can detect both Fe³⁺ and Cr₂O₇²⁻ ions.

Near sunlight continuous broadband white-light emission by single-phase Zn(ii)-1,3,5-benzenetricarboxylate MOFs

A white light MOF was constructed from low-cost 1,3,5-benzenetricarboxylate and nontoxic Zinc(ii) ions, which exhibited near sunlight continuous white-light emission under a wide radiation range of 300 to 390 nm and was used for white-light emitting diodes.