Isolated Single Iron Atoms Anchored on N-Doped Porous Carbon as an Efficient Electrocatalyst for the Oxygen Reduction Reaction

Growing Tungsten Nanophases on Carbon Spheres Doped with Nitrogen. Behaviour as Electro-Catalysts for Oxygen Reduction Reaction

This work shows the preparation of carbon nanospheres with a high superficial nitrogen content (7 wt.%), obtained by a simple hydrothermal method, from pyrocatechol and formaldehyde, around which tungsten nanophases have been formed. One of these nanophases is tungsten carbide, whose electro-catalytic behavior in the ORR has been evaluated together with the presence of nitrogen surface groups. Both current and potential kinetic density values improve considerably with the presence of tungsten, despite the significant nitrogen loss detected during the carbonization treatment. However, the synergetic effect that the WC has with other electro-catalytic metals in this reaction cannot be easily evaluated with the nitrogen in these materials, since both contents vary in opposite ways. Nevertheless, all the prepared materials carried out oxygen electro-reduction by a mixed pathway of two and four electrons, showing remarkable electro-catalytic behavior.

Stabilizing Fe-N-C Catalysts as Model for Oxygen Reduction Reaction

The highly efficient energy conversion of the polymer-electrolyte-membrane fuel cell (PEMFC) is extremely limited by the sluggish oxygen reduction reaction (ORR) kinetics and poor electrochemical stability of catalysts. Hitherto, to replace costly Pt-based catalysts, non-noble-metal ORR catalysts are developed, among which transition metal-heteroatoms-carbon (TM-H-C) materials present great potential for industrial applications due to their outstanding catalytic activity and low expense. However, their poor stability during testing in a two-electrode system and their high complexity have become a big barrier for commercial applications. Thus, herein, to simplify the research, the typical Fe-N-C material with the relatively simple constitution and structure, is selected as a model catalyst for TM-H-C to explore and improve the stability of such a kind of catalysts. Then, different types of active sites (centers) and coordination in Fe-N-C are systematically summarized and discussed, and the possible attenuation mechanism and strategies are analyzed. Finally, some challenges faced by such catalysts and their prospects are proposed to shed some light on the future development trend of TM-H-C materials for advanced ORR catalysis.

Functionalized Iron-Nitrogen-Carbon Electrocatalyst Provides a Reversible Electron Transfer Platform for Efficient Uranium Extraction from Seawater

Uranium extraction from seawater provides an opportunity for sustainable fuel supply to nuclear power plants. Herein, an adsorption-electrocatalysis strategy is demonstrated for efficient uranium extraction from seawater using a functionalized iron-nitrogen-carbon (Fe-N_x -C-R) catalyst, comprising N-doped carbon capsules supporting FeN_x single-atom sites and surface chelating amidoxime groups (R). The amidoxime groups bring hydrophilicity to the adsorbent and offer surface-specific binding sites for UO₂ ²⁺ capture. The site-isolated FeN_x centres reduce adsorbed UO₂ ²⁺ to UO₂ ⁺ . Subsequently, through electrochemical reduction of the FeN_x sites, unstable U(V) ions are reoxidized to U(VI) in the presence of Na⁺ resulting in the generation of solid Na₂ O(UO₃ ·H₂ O)_x , which can easily be collected. Fe-N_x -C-R reduced the uranium concentration in seawater from ≈3.5 ppb to below 0.5 ppb with a calculated capacity of ≈1.2 mg g^-1 within 24 h. To the best of the knowledge, the developed system is the first to use the adsorption of uranyl ions and electrodeposition of solid Na₂ O(UO₃ .H₂ O)_x for the extraction of uranium from seawater. The important discoveries guide technology development for the efficient extraction of uranium from seawater.

Accelerate Synthesis of Metal-Organic Frameworks by a Robotic Platform and Bayesian Optimization

Synthesis of materials with desired structures, e.g., metal-organic frameworks (MOFs), involves optimization of highly complex chemical and reaction spaces due to multiple choices of chemical elements and reaction parameters/routes. Traditionally, realizing such an aim requires rapid screening of these nonlinear spaces by experimental conduction with human intuition, which is quite inefficient and may cause errors or bias. In this work, we report a platform that integrates a synthesis robot with the Bayesian optimization (BO) algorithm to accelerate the synthesis of MOFs. This robotic platform consists of a direct laser writing apparatus, precursor injecting and Joule-heating components. It can automate the MOFs synthesis upon fed reaction parameters that are recommended by the BO algorithm. Without any prior knowledge, this integrated platform continuously improves the crystallinity of ZIF-67, a demo MOF employed in this study, as the number of operation iterations increases. This work represents a methodology enabled by a data-driven synthesis robot, which achieves the goal of material synthesis with targeted structures, thus greatly shortening the reaction time and reducing energy consumption. It can be easily generalized to other material systems, thus paving a new route to the autonomous discovery of a variety of materials in a cost-effective way in the future.

Catalysis in Single Crystalline Materials: From Discrete Molecules to Metal-Organic Frameworks

Catalysis is one of the key techniques for people's modern life. It has created numerous essential chemicals such as biomedicines, agricultural chemicals and unique materials. Heterogeneous catalysis is the new emerging method with reusable catalysts. Among heterogenous catalysis patterns developed so far, single crystalline catalysis has become the promising one owing to its high catalytic density and selectivity resulted by the inherent porosity, orderliness of the lattices and permeability. These crystalline catalysts could be used in various reactions such as photo-dimerization, Diels-Alder reaction, CO₂ transformation and so on. In this review, we highlighted the reported works about the single crystalline catalysts. Both discrete small molecules and metal-organic frameworks (MOFs) have been used to prepare single crystals for catalysis. For discrete molecules based crystalline catalysts, coordinated and covalent molecules have been used. There were more catalytic modes in crystalline MOF catalysts. Three patterns were identified in this review: single crystalline MOFs i) without catalytic sites, ii) with inherent catalytic features and iii) with introducing catalytic units by post synthetic modification. Based on these examples, this review committed to provide the inspirations for the further design and application of single crystalline materials.

A Ferrocene Metal-Organic Framework Solid for Fe-Loaded Carbon Matrices and Nanotubes: High-Yield Synthesis and Oxygen Reduction Electrocatalysis

Using a carbon-rich designer metal-organic framework (MOF), we open a high-yield synthetic strategy for iron-nitrogen-doped carbon (Fe-N-C) nanotube materials that emulate the electrocatalysis performance of commercial Pt/C. The Zr(IV)-based MOF solid boasts multiple key functions: (1) a dense array of alkyne units over the backbone and the side arms, which are primed for extensive graphitization; (2) the open, branched structure helps maintain porosity for absorbing nitrogen dopants; and (3) ferrocene units on the side arms as atomically dispersed precursor catalyst for targeting micropores and for effective iron encapsulation in the carbonized product. As a result, upon pyrolysis, over 89% of the carbon component in the MOF scaffold is successfully converted into carbonized products, thereby contrasting the easily volatilized carbon of most MOFs. Moreover, over 97% of the iron ends up being encased as acid-resistant Fe/Fe₃C nanoparticles in carbon nanotubes/carbon matrices.

Enriching Atomic Cobalt in an Ultrathin Porous Carbon Shell for Enhanced Electrocatalysis

Developing nonprecious electrocatalysts operating in acidic and alkaline media for an oxygen reduction reaction (ORR) is essential for sustainable energy technologies. Increasing the metal active site density is an effective strategy to enhance the activity, but it remains challenging because of metal sintering during pyrolysis. Here, we report a novel strategy of enriching atomically dispersed cobalt species in nitrogen-doped carbon for improving the electrocatalytic performance. A hollow carbon nanosphere with reduced shell thickness was obtained by taking advantage of the carbothermic reaction between carbon and ZnO template, and the resulting cobalt enrichment in the ultrathin carbon shell leads to an increase of the density of Co atoms. Together with advantageous microstructure features such as high surface area and multiscale porosity, the corresponding catalyst demonstrated promising oxygen reduction reaction performance in strong acidic and alkaline electrolytes and has two times higher kinetic current density than the nonenriched one. The present work provides an attractive and facile route to engineer active site in electrocatalysts.

Single-Atom (Iron-Based) Catalysts: Synthesis and Applications

Supported single-metal atom catalysts (SACs) are constituted of isolated active metal centers, which are heterogenized on inert supports such as graphene, porous carbon, and metal oxides. Their thermal stability, electronic properties, and catalytic activities can be controlled via interactions between the single-metal atom center and neighboring heteroatoms such as nitrogen, oxygen, and sulfur. Due to the atomic dispersion of the active catalytic centers, the amount of metal required for catalysis can be decreased, thus offering new possibilities to control the selectivity of a given transformation as well as to improve catalyst turnover frequencies and turnover numbers. This review aims to comprehensively summarize the synthesis of Fe-SACs with a focus on anchoring single atoms (SA) on carbon/graphene supports. The characterization of these advanced materials using various spectroscopic techniques and their applications in diverse research areas are described. When applicable, mechanistic investigations conducted to understand the specific behavior of Fe-SACs-based catalysts are highlighted, including the use of theoretical models.

Recent Advances and Perspective on Electrochemical Ammonia Synthesis under Ambient Conditions

Ammonia is an essential chemical for agriculture and industry. To date, NH₃ is mainly supplied by the traditional Haber-Bosch process, which is operated under high-temperature and high-pressure in a centralized way. To achieve ammonia production in an environmentally benign way, electrochemical NH₃ synthesis under ambient conditions has become the frontier of energy and chemical conversion schemes, as it can be powered by renewable energy and operates in a decentralized way. The recent progress on developing different strategies for NH₃ production, including 1) classic NH₃ synthesis pathways over nanomaterials; 2) the Mars-van Krevelen (MvK) mechanism over metal nitrides (MN_x ); 3) reducing the nitrate into NH₃ over Cu-based nanomaterial; and 4) metal-N₂ battery release of NH₃ from Li_x M. Moreover, the most recent advances in engineering strategies for developing highly active materials and the design of the reaction systems for NH₃ synthesis are covered.

Designed Synthesis and Catalytic Mechanisms of Non-Precious Metal Single-Atom Catalysts for Oxygen Reduction Reaction

Oxygen reduction reaction (ORR) is the important half-reaction for metal-air batteries and fuel cells (FCs), which plays the decisive role for the performance of whole devices. Developing high-efficiency non-precious metal ORR catalysts is urgent and still challenging. Single-atom catalysts (SACs) are considered to be one of the promising substitutes for Pt due to their maximum atom utilization efficiency and mass activity. Despite considerable efforts in preparing various SACs, the reaction mechanism and intrinsic activity modulation during the ORR reaction are still not understood in-depth. In this review, the latest advances in the current synthetic strategies for SACs are summarized. The effect of various coordination environments including central metal atoms, coordination atoms, environmental atoms, and guest groups on the intrinsic ORR activity of SACs are discussed. The electrocatalytic mechanisms are clarified by combining density functional theory calculations with in situ advanced characterization technologies. Then, the applications of SACs in FCs and Zn-air batteries are reviewed. Finally, the prospects and challenges for further development of SACs are highlighted.

Graphene-Based Materials for Flexible Lithium-Sulfur Batteries

The increasing demand for wearable electronic devices necessitates flexible batteries with high stability and desirable energy density. Flexible lithium-sulfur batteries (FLSBs) have been increasingly studied due to their high theoretical energy density through the multielectron chemistry of low-cost sulfur. However, the implementation of FLSBs is challenged by several obstacles, including their low practical energy density, short life, and poor flexibility. Various graphene-based materials have been applied to address these issues. Graphene, with good conductivity and flexibility, exhibits synergistic effects with other active/catalytic/flexible materials to form multifunctional graphene-based materials, which play a pivotal role in FLSBs. This review summarizes the recent progress of graphene-based materials that have been used as various FLSB components, including cathodes, interlayers, and anodes. Particular attention is focused on the precise nanostructures, graphene efficacy, interfacial effects, and battery layout for realizing FLSBs with good flexibility, energy density, and cycling stability.

Multifunctional Electrocatalysis on Single-Site Metal Catalysts: A Computational Perspective

Multifunctional electrocatalysts are vastly sought for their applications in water splitting electrolyzers, metal-air batteries, and regenerative fuel cells because of their ability to catalyze multiple reactions such as hydrogen evolution, oxygen evolution, and oxygen reduction reactions. More specifically, the application of single-atom electrocatalyst in multifunctional catalysis is a promising approach to ensure good atomic efficiency, tunability and additionally benefits simple theoretical treatment. In this review, we provide insights into the variety of single-site metal catalysts and their identification. We also summarize the recent advancements in computational modeling of multifunctional electrocatalysis on single-site catalysts. Furthermore, we explain each modeling step with open-source-based working examples of a standard computational approach.

Engineering Oversaturated Fe-N5 Multifunctional Catalytic Sites for Durable Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are regarded as a promising next-generation system for advanced energy storage owing to a high theoretical energy density of 2600 Wh kg^-1 . However, the practical implementation of Li-S batteries has been thwarted by the detrimental shuttling behavior of polysulfides, and the sluggish kinetics in electrochemical processes. Herein, a novel single atom (SA) catalyst with oversaturated Fe-N₅ coordination structure (Fe-N₅ -C) is precisely synthesized by an absorption-pyrolysis strategy and introduced as an effective sulfur host material. The experimental characterizations and theoretical calculations reveal synergism between atomically dispersed Fe-N₅ active sites and the unique carbon support. The results exhibit that the sulfur composite cathode built on the Fe-N₅ -C can not only adsorb polysulfides via chemical interaction, but also boost the redox reaction kinetics, thus mitigating the shuttle effect. Meanwhile, the robust three-dimensional nitrogen doped carbon nanofiber with large surface area, and high porosity enables strong physical confinement and fast electron/ion transfer process. Attributed to such unique features, Li-S batteries with S/Fe-N₅ -C composite cathode realize outstanding cyclability and rate capability, as well as high areal capacities under raised sulfur loading, which demonstrates great potential in developing advanced Li-S batteries.

Pyrolysis-Free Synthesized Catalyst towards Acidic Oxygen Reduction by Deprotonation

Acidic oxygen reduction is vital for renewable energy devices such as fuel cells. However, many aspects of the catalytic process are still uncertain-especially the large difference in activity in acidic and alkaline media. Thus, the design and synthesis of model catalysts to determine the active centers and the inactivation mechanism are urgently needed. We report a pyrolysis-free synthesis route to fabricate a catalyst (CPF-Fe@NG) for oxygen reduction in acidic conditions. By introducing a deprotonation process, we extended the oxygen reduction reaction (ORR) activity from alkaline to acidic conditions. CPF-Fe@NG demonstrated outstanding performance with a half-wave potential of 853 mV (vs. RHE) and good stability after 10000 cycles in 1 M HClO₄ . The pyrolysis-free route could also be used to assemble fuel cells, with a maximum power density of 126 mW cm^-2 . Our findings offer new insights into the ORR process to optimize catalysts for both mechanistic studies and practical applications.

Atomic-Scale Tailoring and Molecular-Level Tracking of Oxygen-Containing Tungsten Single-Atom Catalysts with Enhanced Singlet Oxygen Generation

The local coordination structure of metal atoms in single-atom catalysts (SACs) greatly influences their catalytic performance. And for most SACs, single metal atoms were anchored on carbon materials with N or C coordination. However, the rational design of oxygen-containing SACs and analyzing its structure-performance relationship remain challenging. Herein, we used amino-rich compounds to tailor the metatungstate and fix the W atoms and finally obtained the oxygen-containing W-SACs. The structural evolution of tungsten and its coordination atoms were tracked by electrospray ionization high-definition mass spectrometry. Furthermore, aberration-corrected transmission electron microscopy, X-ray absorption fine-structure spectroscopy, and first-principles calculation results revealed that different from the traditional SACs, the WO₂N₂ moiety (W coordinated with two O atoms and two N atoms) may be the favored structure for W species. This special structure promoted the energy transfer for enhancing singlet oxygen generation. This work presents an efficient way to prepare more high-efficiency SACs by atomic-scale tailoring and structural evolution tracking at the molecular level.

Rational Design of Single-Atom Site Electrocatalysts: From Theoretical Understandings to Practical Applications

Atomically dispersed metal-based electrocatalysts have attracted increasing attention due to their nearly 100% atomic utilization and excellent catalytic performance. However, current fundamental comprehension and summaries to reveal the underlying relationship between single-atom site electrocatalysts (SACs) and corresponding catalytic application are rarely reported. Herein, the fundamental understandings and intrinsic mechanisms underlying SACs and corresponding electrocatalytic applications are systemically summarized. Different preparation strategies are presented to reveal the synthetic strategies with engineering the well-defined SACs on the basis of theoretical principle (size effect, metal-support interactions, electronic structure effect, and coordination environment effect). Then, an overview of the electrocatalytic applications is presented, including oxygen reduction reaction, hydrogen evolution reaction, oxygen evolution reaction, oxidation of small organic molecules, carbon dioxide reduction reaction, and nitrogen reduction reaction. The underlying structure-performance relationship between SACs and electrocatalytic reactions is also discussed in depth to expound the enhancement mechanisms. Finally, a summary is provided and a perspective supplied to demonstrate the current challenges and opportunities for rational designing, synthesizing, and modulating the advanced SACs toward electrocatalytic reactions.

General Design Concept for Single-Atom Catalysts toward Heterogeneous Catalysis

As a new and popular material, single-atom catalysts (SACs) exhibit excellent activity, selectivity, and stability for numerous important reactions, and show great potential in heterogeneous catalysis due to their high atom utilization efficiency and the controllable characteristics of the active sites. The composition and coordination would determine the geometric and electronic structures of SACs, and thus greatly influence the catalytic performance. Based on atom economy, rational design and controllable synthesis of SACs have become central tasks in the fields of low-cost and green catalysis. Herein, an introduction to the recent progress in the precise synthesis of SACs including the regulation of the coordination structure and the choice of different systems is presented. Thereafter, the potentials of SACs in different applications are comprehensively summarized and discussed. Furthermore, a detailed discussion of the recent developments regarding the large-scale preparation of SACs is provided, including the major issues and prospects for industrialization. Finally, the main challenges and opportunities of rapid large-scale industrialization of SACs are briefly discussed.

CoOx @Co-NC Catalyst with Dual Active Centers for Enhanced Oxygen Evolution: Breaking Trade-Off of Particle Size and Metal Loading

Increasing the metal loading and downsizing the metal particle size are two effective ways to boost the electrochemical performance of catalysts. However, it is difficult to simultaneously increase the metal loading and reduce the particle size since isolated individual atoms are easy to aggregate into nanoparticles when increasing the metal loading. To tackle this contradiction, we report a bottom-up ligand-mediated strategy to facilely prepare ultrafine CoO_x nanoclusters anchored on a Co-N-containing carbon matrix (CoO_x @Co-NC). The co-exist of N and O atoms prevent Co atoms agglomerating into large particles and allowing the formation of ultrafine dispersed Co species with large Co loading (up to 20 wt.%). Since the relationship between ultrasmall size and large metal loading is well balanced, the CoO_x nanoclusters have no inhibitory effect, but facilitate the catalytic performance of Co-N₄ sites during OER process. Consequently, due to the synergistic effect of ultrafine CoO_x nanoclusters and Co-N₄ macrocycles, the as-synthesized CoO_x @Co-NC exhibit promising OER activity (η₁₀ =370 mV, Tafel plot=40 mV/dec), bettering than that of benchmark RuO₂ (η₁₀ =411 mV, Tafel plot=72 mV/dec). This ligand-mediated strategy to synthesize carbonaceous materials containing dual active centers with large metal loading is promising for developing active and stable catalysts for electrocatalytic applications.

An Adjacent Atomic Platinum Site Enables Single-Atom Iron with High Oxygen Reduction Reaction Performance

The modulation effect has been widely investigated to tune the electronic state of single-atomic M-N-C catalysts to enhance the activity of oxygen reduction reaction (ORR). However, the in-depth study of modulation effect is rarely reported for the isolated dual-atomic metal sites. Now, the catalytic activities of Fe-N₄ moiety can be enhanced by the adjacent Pt-N₄ moiety through the modulation effect, in which the Pt-N₄ acts as the modulator to tune the 3d electronic orbitals of Fe-N₄ active site and optimize ORR activity. Inspired by this principle, we design and synthesize the electrocatalyst that comprises isolated Fe-N₄ /Pt-N₄ moieties dispersed in the nitrogen-doped carbon matrix (Fe-N₄ /Pt-N₄ @NC) and exhibits a half-wave potential of 0.93 V vs. RHE and negligible activity degradation (ΔE_1/2 =8 mV) after 10000 cycles in 0.1 M KOH. We also demonstrate that the modulation effect is not effective for optimizing the ORR performances of Co-N₄ /Pt-N₄ and Mn-N₄ /Pt-N₄ systems.

Noble-Metal-Free Multicomponent Nanointegration for Sustainable Energy Conversion

Global energy and environmental crises are among the most pressing challenges facing humankind. To overcome these challenges, recent years have seen an upsurge of interest in the development and production of renewable chemical fuels as alternatives to the nonrenewable and high-polluting fossil fuels. Photocatalysis, photoelectrocatalysis, and electrocatalysis provide promising avenues for sustainable energy conversion. Single- and dual-component catalytic systems based on nanomaterials have been intensively studied for decades, but their intrinsic weaknesses hamper their practical applications. Multicomponent nanomaterial-based systems, consisting of three or more components with at least one component in the nanoscale, have recently emerged. The multiple components are integrated together to create synergistic effects and hence overcome the limitation for outperformance. Such higher-efficiency systems based on nanomaterials will potentially bring an additional benefit in balance-of-system costs if they exclude the use of noble metals, considering the expense and sustainability. It is therefore timely to review the research in this field, providing guidance in the development of noble-metal-free multicomponent nanointegration for sustainable energy conversion. In this work, we first recall the fundamentals of catalysis by nanomaterials, multicomponent nanointegration, and reactor configuration for water splitting, CO₂ reduction, and N₂ reduction. We then systematically review and discuss recent advances in multicomponent-based photocatalytic, photoelectrochemical, and electrochemical systems based on nanomaterials. On the basis of these systems, we further laterally evaluate different multicomponent integration strategies and highlight their impacts on catalytic activity, performance stability, and product selectivity. Finally, we provide conclusions and future prospects for multicomponent nanointegration. This work offers comprehensive insights into the development of cost-competitive multicomponent nanomaterial-based systems for sustainable energy-conversion technologies and assists researchers working toward addressing the global challenges in energy and the environment.

Atom-Anchoring Strategy with Metal-Organic Frameworks for Highly Efficient Solid-State Electrochemiluminescence

A chemical fixation strategy originating from single-atom-anchoring with metal-organic frameworks as a carrying matrix was proposed for solid-state electrochemiluminescence (ECL). Herein, UiO-67(N) with the exposure of 2,2'-bipyridine (bpy) ligands could coordinate with Ru²⁺ to form a local structure of [Ru(bpy)₃]²⁺ (Ru-UiO). The influence of the steric effect induced with different Ru sources was discussed. The as-obtained Ru-UiO exhibits high ECL intensity and outstanding stability in the presence of a coreactant at low concentrations. The proposed synthesis strategy may hold great potential for the synthesis of solid-state ECL materials and their further utilization in ECL analysis.

Single Mn Atom Anchored on Nitrogen-Doped Graphene as a Highly Efficient Electrocatalyst for Oxygen Reduction Reaction

Single Mn atom on nitrogen-doped graphene (MnN₄ -G) has exhibited good structural stability and high activity for the adsorption and dissociation of an O₂ molecule, becoming a promising single-atom catalyst (SAC) candidate for oxygen reduction reaction (ORR). However, the catalytic activity of MnN₄ -G for the ORR and the optimal reaction pathway remain obscure. In this work, density-functional theory calculations were employed to comprehensively investigate all the possible pathways and intermediate reactions of the ORR on MnN₄ -G. The feasible active sites and the most stable adsorption configurations of the intermediates and transition states during the ORR were identified. Screened from all the possibilities, three optimal four-electron O₂ hydrogenation pathways with an ultralow energy barrier of 0.13 eV were discovered that are energetically more favorable than direct O₂ dissociation pathways. Analysis of the free energy diagram further verified the thermodynamical feasibility of the three pathways. Thus, MnN₄ -G possesses superior ORR activity. This study provides a fundamental understanding of the design of highly efficient SACs for the ORR.

Hierarchically porous Fe,N-doped carbon nanorods derived from 1D Fe-doped MOFs as highly efficient oxygen reduction electrocatalysts in both alkaline and acidic media

Rationally designing low-cost yet highly efficient electrocatalysts for the oxygen reduction reaction (ORR) in both alkaline and acidic media remains highly challenging. Herein, we report the facile synthesis of Fe,N-doped carbon nanorods (denoted as Fe-N/C-NR) with abundant hierarchical pores and highly active sites by the pyrolysis of a one-dimensional (1D) Fe-doped zeolitic imidazolate framework (Fe-ZIF-8) as a self-sacrificing template. The unique 1D nanoarchitecture of the resultant Fe-N/C-NR can provide fast electron and electrolyte transport towards exposed active sites, and their hierarchically porous structures with large surface areas can efficiently facilitate mass diffusion and increase the density of exposed active sites. Furthermore, it is demonstrated that the coexistence of highly dispersed Fe-Nx sites and Fe3C/Fe nanoparticles (NPs) in these electrocatalysts can provide a large number of desired catalytic centers with highly intrinsic activity and structural stability. As a result, the optimized 5Fe-N/C-NR exhibits excellent catalytic activity for the ORR, with a high half-wave potential (E1/2) of 0.90 V vs. RHE in alkaline medium, superior to that of commercial Pt/C (0.86 V vs. RHE), and also a high E1/2 of 0.81 V vs. RHE in acidic medium, comparable to that of commercial Pt/C (0.81 V vs. RHE). Moreover, its robust ORR durability can far surpass that of commercial Pt/C in both acidic and alkaline media, further highlighting the merit of this MOF-templated strategy. Our findings might shed light on the rational design of cost-effective and highly efficient ORR electrocatalysts for practical applications.

Recent advances in single-atom catalysts for advanced oxidation processes in water purification

Single-atom catalysts (SACs) have attracted considerable attention from researchers because of their distinct structures and characteristics, especially in maximizing atomic utilization and elevating the intrinsic catalytic activity. More recently, SACs have been becoming a burgeoning area of the environmental field and are extensively applied to remove various refractory organic pollutants. This review summarizes the emerging synthetic and characterization strategies of SACs and analyzes their development tendency. Besides, the application of SACs in advanced oxidation processes (AOPs, e.g., catalysis of H₂O₂, activation of persulfates and photocatalysis) is discussed. The excellent removal of pollutants depends on the fast generation of reactive oxygen species (SO₄^•-, ^•OH, ¹O₂, and O₂^•-). The advantages of SACs in AOPs are summarized, and constructive opinions are put forward for the stability and activity of the catalyst. Finally, the opportunities and challenges faced by SACs and its future development direction in the AOPs catalytic field are proposed.

Unraveling the High-Activity Origin of Single-Atom Iron Catalysts for Organic Pollutant Oxidation via Peroxymonosulfate Activation

Single-atom catalysts (SACs) have emerged as efficient materials in the elimination of aqueous organic contaminants; however, the origin of high activity of SACs still remains elusive. Herein, we identify an 8.1-fold catalytic specific activity (reaction rate constant normalized to catalyst's specific surface area and dosage) enhancement that can be fulfilled with a single-atom iron catalyst (SA-Fe-NC) prepared via a cascade anchoring method compared to the iron nanoparticle-loaded catalyst, resulting in one of the most active currently known catalysts in peroxymonosulfate (PMS) conversion for organic pollutant oxidation. Experimental data and theoretical results unraveled that the high-activity origin of the SA-Fe-NC stems from the Fe-pyridinic N₄ moiety, which dramatically increases active sites by not only creating the electron-rich Fe single atom as the catalytic site but also producing electron-poor carbon atoms neighboring pyridinic N as binding sites for PMS activation including synchronous PMS reduction and oxidation together with dissolved oxygen reduction. Moreover, the SA-Fe-NC exhibits excellent stability and applicability to realistic industrial wastewater remediation. This work offers a novel yet reasonable interpretation for why a small amount of iron in the SA-Fe-NC can deliver extremely superior specific activity in PMS activation and develops a promising catalytic oxidation system toward actual environmental cleanup.

Cooperative Single-Atom Active Centers for Attenuating the Linear Scaling Effect in the Nitrogen Reduction Reaction

Cooperative effects of adjacent active centers are critical for single-atom catalysts (SACs) as active site density matters. Yet, how it affects scaling relationships in many important reactions such as the nitrogen reduction reaction (NRR) is underexplored. Herein we elucidate how the cooperation of two active centers can attenuate the linear scaling effect in the NRR through a first-principle study on 39 SACs comprised of two adjacent (∼4 Å apart) four N-coordinated metal centers (MN₄ duo) embedded in graphene. Bridge-on adsorption of dinitrogen-containing species appreciably tilts the balance of adsorption of N₂H and NH₂ toward N₂H and thus substantially loosens the restraint of scaling relationships in the NRR, achieving low onset potential (V) and direct N≡N cleavage (Mo, Re) at room temperature, respectively. The potential of the MN₄ duo in the NRR provides new insight into circumventing the limitations of scaling relationships in heterogeneous catalysis.