A validated 1H NMR method for the determination of the degree of deacetylation of chitosan

Pharmacological performance of novel poly-(ionic liquid)-grafted chitosan-N-salicylidene Schiff bases and their complexes

In our endeavor to develop a new class of pharmacological candidates with antimicrobial and anticancer efficacy, a series of biopolymeric chitosan Schiff bases bearing salicylidene ionic liquid (IL-Sal) brushes (ILCSB1-3, poly-(GlcNHAc-GlcNH2-(GlcN-Sal-IL)) was successfully synthesized by adopting efficient synthetic routes. Unfortunately, metalation trials of these biopolymeric Schiff bases afford the corresponding Ag(I)/M(II) complexes (where M=Co, Pd). These designed architectures were structurally characterized and pharmacologically evaluated for their in vitro antimicrobial, against common bacterial and fungal pathogens, and anticancer activities against human colon carcinoma (HCT-116) cell line. In conclusion functionalization of chitosan with IL-Sal brushes coupled with metalation of formed ILCSBs were synergistically enhanced its antimicrobial and antitumor properties to a great extent. Noteworthy, Ag-ILCSB2 (IC50=9.13μg/mL) was ca. 5-fold more cytotoxic against HCT-116 cell line than ILCSB2 (IC50=43.30μg/mL).

Rapid fluorescence detection of hypoxic microenvironments by nitro-benzyl conjugated chitosan nanoparticles encapsulating hydrophobic fluorophores

Hypoxia-responsive chitosan nanoparticles synthesized by the conjugation of nitro-benzyl derivatives into chitosan polymers and the subsequent self-assembly of them with hydrophobic fluorophores, were successfully applied for the rapid determination of the hypoxic status of lung carcinoma cells (A549) within 30 min.

Experimental design for determining quantitative structure activity relationship for antibacterial chitosan derivatives

Experimental design was utilized for synthesis and optimization of antimicrobial chitosan derivatives and for the development of their structure–activity relationship.

Bio-inspired adhesive catechol-conjugated chitosan for biomedical applications: A mini review

The development of adhesive materials, such as cyanoacrylate derivatives, fibrin glues, and gelatin-based adhesives, has been an emerging topic in biomaterial science because of the many uses of these materials, including in wound healing patches, tissue sealants, and hemostatic materials. However, most bio-adhesives exhibit poor adhesion to tissue and related surfaces due to the presence of body fluid. For a decade, studies have aimed at addressing this issue by developing wet-resistant adhesives. Mussels demonstrate robust wet-resistant adhesion despite the ceaseless waves at seashores, and mussel adhesive proteins play a key role in this adhesion. Adhesive proteins located at the distal end (i.e., those that directly contact surfaces) are composed of nearly 60% of amino acids called 3,4-dihydroxy-l-phenylalanine (DOPA), lysine, and histidine, which contain side chains of catechol, primary amines, and secondary amines, respectively. Inspired by the abundant catecholamine in mussel adhesive proteins, researchers have developed various types of polymeric mimics, such as polyethylenimine-catechol, chitosan-catechol, and other related catecholic polymers. Among them, chitosan-catechol is a promising adhesive polymer for biomedical applications. The conjugation of catechol onto chitosan dramatically increases its solubility from zero to nearly 60mg/mL (i.e., 6% w/v) in pH 7 aqueous solutions. The enhanced solubility maximizes the ability of catecholamine to behave similar to mussel adhesive proteins. Chitosan-catechol is biocompatible and exhibits excellent hemostatic ability and tissue adhesion, and thus, chitosan-catechol will be widely used in a variety of medical settings in the future. This review focuses on the various aspects of chitosan-catechol, including its (1) preparation methods, (2) physicochemical properties, and (3) current applications.

A novel photocrosslinkable and cytocompatible chitosan coating for Ti6Al4V surfaces

BACKGROUND

In this work, chitosan (CH) was used to produce a novel coating for Ti6Al4V, the most widely used alloy in orthopedic implants, so as to improve the biological tissue response at the metallic surface.

METHODS

The Ti6Al4V surface was sandblasted with alumina particles. CH was chemically modified, via carbodiimide chemistry, using lactobionic and 4-azidebenzoic acid to make it soluble at physiological pH and photocrosslinkable, respectively. The reaction was verified by FTIR, NMR and UV/vis spectroscopy. Ti6Al4V surfaces were coated with solutions of the modified CH and exposed to UV light, causing polymer crosslinking and formation of a hydrogel on the surface. The crosslinking reaction was monitored by FTIR at different exposure times. Coating morphology was observed by SEM. The coating's cytocompatibility was determined in vitro through the culture of rat bone marrow mesenchymal stem cells, using an MTT assay, with their morphology assessed by SEM.

RESULTS

The developed coating behaved as a hydrogel on the Ti6Al4V and was stable on the surface. FTIR and NMR confirmed the crosslinking mechanism, based on an arile ring expansion, and subsequent reaction with the CH amine groups. Furthermore, the coating was able to support cell proliferation and osteogenic differentiation.

CONCLUSIONS

UV crosslinking of CH is easy to apply and has potential for future metallic implant surface modifications. Due to its nature as a hydrogel, the coating could be used for further studies in the encapsulation of bioactive molecules to improve osteogenic potential at the tissue-implant interface.

Physicochemical and biological characterization of chitosan-microRNA nanocomplexes for gene delivery to MCF-7 breast cancer cells

Cancer gene therapy requires the design of non-viral vectors that carry genetic material and selectively deliver it with minimal toxicity. Non-viral vectors based on cationic natural polymers can form electrostatic complexes with negatively-charged polynucleotides such as microRNAs (miRNAs). Here we investigated the physicochemical/biophysical properties of chitosan-hsa-miRNA-145 (CS-miRNA) nanocomplexes and the biological responses of MCF-7 breast cancer cells cultured in vitro. Self-assembled CS-miRNA nanocomplexes were produced with a range of (+/-) charge ratios (from 0.6 to 8) using chitosans with various degrees of acetylation and molecular weight. The Z-average particle diameter of the complexes was <200 nm. The surface charge increased with increasing amount of chitosan. We observed that chitosan induces the base-stacking of miRNA in a concentration dependent manner. Surface plasmon resonance spectroscopy shows that complexes formed by low degree of acetylation chitosans are highly stable, regardless of the molecular weight. We found no evidence that these complexes were cytotoxic towards MCF-7 cells. Furthermore, CS-miRNA nanocomplexes with degree of acetylation 12% and 29% were biologically active, showing successful downregulation of target mRNA expression in MCF-7 cells. Our data, therefore, shows that CS-miRNA complexes offer a promising non-viral platform for breast cancer gene therapy.

Chitosan as a Biomaterial: Influence of Degree of Deacetylation on Its Physiochemical, Material and Biological Properties

Chitosan is a biomaterial with a range of current and potential biomedical applications. Manipulation of chitosan degree of deacetylation (DDA) to achieve specific properties appears feasible, but studies investigating its influence on properties are often contradictory. With a view to the potential of chitosan in the regeneration of nerve tissue, the influence of DDA on the growth and health of olfactory ensheathing cells (OECs) was investigated. There was a linear increase in OEC proliferation as the DDA increased from 72 to 85%. This correlated with linear increases in average surface roughness (0.62 to 0.78 μm) and crystallinity (4.3 to 10.1%) of the chitosan films. Mitochondrial activity and membrane integrity of OECs was significantly different for OECs cultivated on chitosan with DDAs below 75%, while those on films with DDAs up to 85% were similar to cells in asynchronous growth. Apoptotic indices and cell cycle analysis also suggested that chitosan films with DDAs below 75% were cytocompatible but induced cellular stress, while OECs grown on films fabricated from chitosan with DDAs above 75% showed no significant differences compared to those in asynchronous growth. Tensile strength and elongation to break varied with DDA from 32.3 to 45.3 MPa and 3.6 to 7.1% respectively. DDA had no significant influence on abiotic and biotic degradation profiles of the chitosan films which showed approximately 8 and 20% weight loss respectively. Finally, perceived patterns in property changes are subject to change based on potential variations in DDA analysis. NMR examination of the chitosan samples here revealed significant differences depending upon which peaks were selected for integration; 6 to 13% in DDA values within individual samples. Furthermore, differences between DDA values determined here and those reported by the commercial suppliers were significant and this may also be a source of concern when selecting commercial chitosans for biomaterial research.

Degree of deacetylation of chitosan by infrared spectroscopy and partial least squares

The determination of the degree of deacetylation of highly deacetylated chitosan by infrared (IR) spectroscopy was significantly improved with the use of partial least squares (PLS). The IR spectral region from 1500 to 1800 cm(-1) was taken as the dataset. Different PLS models resulting from various data pre-treatments were evaluated and compared. The PLS model that gave excellent internal and external validation performance came from the data that were corrected for the baseline and that was normalized relative to the maximum corrected absorbance. Analysis of the PLS loadings plot showed that the important variables in the spectral region came from the absorption maxima related to the amide bands at 1660 and 1550 cm(-1) and amine band at 1600 cm(-1). IR-PLS results were comparable to the results obtained by potentiometric titration. IR-PLS results were found to be more precise and rugged compared to the usual IR absorbance ratio method. This is consistent with the fact that IR spectral resolution is not really high and that the absorption at a single wavelength is influenced by other factors like hydrogen bonding and the presence of water.

Regioselective thioacetylation of chitosan end-groups for nanoparticle gene delivery systems

Chitosan (CS) end-group chemistry is a conjugation strategy that has been minimally exploited in the literature to date. Although the open-chain form of the CS reducing extremity bears a reactive aldehyde moiety, the most common method to generate a reactive end-group on CS is nitrous acid depolymerization, which produces a 2,5-anhydro-d-mannose unit (M-Unit) bearing also an aldehyde moiety. However, the availability of the latter might be low, since previous literature suggests that its hydrated and non-reactive form, namely the gem-diol form, is predominant in acidic aqueous conditions. Oxime-click chemistry has been used to react on such aldehydes with various degrees of success, but the use of a co-solvent and additional chemical reagents remain necessary to obtain the desired and stable covalent linkage. In this study, we have assessed the availability of the aldehyde reactive form on chitosan treated with nitrous acid. We have also assessed its reactivity towards thiol-bearing molecules in acidic conditions where CS amino groups are fully protonated and thus unreactive towards aldehyde. LC-MS and NMR spectroscopy methods (1H and DOSY, respectively) confirmed the regioselective thioacetylation of the reactive aldehyde with conversion rates between 55 and 70% depending on the thiol molecule engaged. The stabilization of the hemithioacetal intermediates into the corresponding thioacetals was also found to be facilitated upon freeze-drying of the reaction medium. The PEGylation of the CS M-Unit aldehyde by thioacetylation was also performed as a direct application of the proposed conjugation approach. CS-b-PEG2 block copolymers were successfully synthesized and were used to prepare block ionomer complexes with plasmid DNA, as revealed by their spherical morphology vs. the rod-like/globular/toroidal morphology observed for polyplexes prepared using native unmodified chitosan. This novel aqueous thiol-based conjugation strategy constitutes an alternative to the oxime-click pathway; it could be applicable to other polymers.

Distinction of fungal polysaccharides by N/C ratio and mid infrared spectroscopy

A set of fungal polysaccharide samples was characterised by elemental analysis and FTIR spectroscopy and compared with reference chitins, chitosans and β-D-glucans. The nitrogen to carbon (N/C) values and FTIR spectra were used to compare the samples based on their composition. It was found that the N/C ratio correlates well with deacetylation degree (DD) of chitosans and chitin/glucan ratio R(chit) of fungal chitin – β-D-glucan complexes with the exception of some samples having significant nitrogen and/or carbon admixtures. FTIR spectroscopy was indicative for the N-acetylation of chitins (chitosans) as well as for the chitin (chitosan) contribution to fungal polysaccharide preparations. Multivariate analyses of the FTIR data (HCA, PCA) discriminated samples and reference materials into several clusters depending on their similarity. Chitosan lactates, chitosan – β-D-glucans and chitin – β-D-glucans of high and low amounts of chitin were successfully discriminated from the reference polysaccharides and from each other. The proposed procedures based on the N/C ratio and multivariate analyses of FTIR spectra may be used in screening fungal polysaccharide preparations.

Chitin and chitosan from Brazilian Atlantic Coast: Isolation, characterization and antibacterial activity

Chitin and chitosan were obtained by chemical treatments of shrimp shells. Different particle sizes (50-1000 μm) of the raw material were used to study their effect on size distribution, demineralization, deproteinization and deacetylation of chitin and chitosan isolation process. The particle size in the range of 800-1000 μm was selected to isolate chitin, which was achieved by measuring nitrogen, protein, ash, and yield %. Hydrochloric acid (5%, v/v) was optimized in demineralization step to remove the minerals from the starting material. Aqueous solution of sodium hydroxide (5%, w/v) at 90 °C for (20 h) was used in deproteinization step to remove the protein. Pure chitin was consequently impregnated into high concentration of sodium hydroxide (50%) for 3.5 h at 90 °C to remove the acetyl groups in order to form high pure chitosan. The degree of deacetylation (DDA) of chitosan was controlled and evaluated by different analytical tools. The chemical structure of chitin and chitosan was confirmed by elemental analysis, ATR-FTIR, H/C NMR, XRD, SEM, UV-Vis spectroscopy, TGA, and acid-base titration. The isolated chitin and chitosan from shrimp shell showed excellent antibacterial activity against Gram (-ve) bacteria (Escherichia coli) comparing with commercial biopolymers.

Biodegradable chitosan microparticles induce delayed STAT-1 activation and lead to distinct cytokine responses in differentially polarized human macrophages in vitro

Current data suggest that chitosan activates wound macrophages to release endogenous factors that guide mesenchymal stem cell (MSC) to bone fractures. We tested the hypothesis that chitosan, a polymer containing glucosamine and N-acetyl glucosamine, stimulates macrophages in different polarization states to release functional MSC chemokines and mainly anabolic factors. Low-serum conditioned medium was collected from M0, M1 and M2a U937 macrophages previously differentiated with phorbol myristate acetate (PMA) and exposed or not for 24h to chitosan microparticles (80% degree of deacetylation, DDA, 130kDa). Chitosan particles were highly phagocytosed. Chitosan enhanced anabolic factor release from M0 and M2a macrophages (MCP-1, IP-10, MIP-1beta, IL-1ra, IL-10, PDGF), and IL-1beta release, with 25- to 400-fold excess IL-1ra over IL-1beta. In M1 macrophages, chitosan enhanced IL-1beta without enhancing or suppressing inflammatory factor release (IL-6, IP-10, IL-8). M0 and M2a macrophages, with or without chitosan stimulation, produced conditioned medium that promoted 2-fold more MSC chemotaxis than low-serum control medium, while M1-conditioned medium failed to induce MSC chemotaxis. Acetylated chitosan induced U937 macrophages to release IL-1ra without STAT-6 activation, and also induced a delayed STAT-1 activation/IP-10 release response that was not observed using non-biodegradable chitosan (98% DDA, 130kDa). In primary human macrophages, acetylated chitosan enhanced IL-1ra release without inducing IL-1beta, and required PMA priming to elicit STAT-1 activation and IP-10 release. We conclude that biodegradable chitosan particles enhance M0 and M2a macrophage anabolic responses independent of the IL4/STAT-6 axis, by inducing excess IL-1ra over IL-1beta and more chemokine release, without altering their inherent capacity to attract MSCs.

Binding of a quaternary ammonium polymer-grafted-chitosan onto a chemically modified wool fabric surface: assessment of mechanical, antibacterial and antifungal properties

It is quite challenging to bind any chemical compound or polymer onto a wool fibre surface because of the lack of any functional groups available on its surface.

Does the use of chitosan contribute to oxalate kidney stone formation?

Chitosan is widely used in the biomedical field due its chemical and pharmacological properties. However, intake of chitosan results in renal tissue accumulation of chitosan and promotes an increase in calcium excretion. On the other hand, the effect of chitosan on the formation of calcium oxalate crystals (CaOx) has not been described. In this work, we evaluated the antioxidant capacity of chitosan and its interference in the formation of CaOx crystals in vitro. Here, the chitosan obtained commercially had its identity confirmed by nuclear magnetic resonance and infrared spectroscopy. In several tests, this chitosan showed low or no antioxidant activity. However, it also showed excellent copper-chelating activity. In vitro, chitosan acted as an inducer mainly of monohydrate CaOx crystal formation, which is more prevalent in patients with urolithiasis. We also observed that chitosan modifies the morphology and size of these crystals, as well as changes the surface charge of the crystals, making them even more positive, which can facilitate the interaction of these crystals with renal cells. Chitosan greatly influences the formation of crystals in vitro, and in vivo analyses should be conducted to assess the risk of using chitosan.

Thermal gelation of chitosan in an aqueous alkali-urea solution

Chitosan can readily dissolve in a precooled aqueous alkali-urea solution, a solvent that has previously been developed to dissolve cellulose. Upon heating, the resulting solutions quickly become a gel. The thermal gelling of the chitosan solutions was studied by rheology. Initially, a temperature ramp test was used to determine the gelation temperatures (Tgel). It was found that Tgel does not significantly change with chitosan concentration. The in situ formed gels liquefy on cooling, but the liquefication temperature (Tliq) is considerably lower than Tgel, indicating a large hysteresis in the cooling process. In addition, Tliq decreases with increasing polymer concentration. The kinetics of thermal gelation was then studied by isothermal curing. The solution gels were cured not only at temperatures above the Tgel, which was determined in the temperature ramp test, but also at temperatures far below the Tgel, provided that the solution is cured at the temperature for a long enough time. The solutions become gel faster when cured at higher temperatures. When cured at the same temperature, higher concentration solutions become gel faster. The apparent activation energy for the thermal gelation of the chitosan solutions was determined to be ∼200 kJ mol(-1). Physical gels of pure chitosan were obtained by repeated soaking the in situ formed gels in water. Preliminary test shows that new gels are highly biocompatible.

Synthesis and anticervical cancer activity of novel pH responsive micelles for oral curcumin delivery

Curcumin (CM) has demonstrated safety and efficacy as a drug, but its pharmaceutical role is restricted as a result of extremely low aqueous solubility, rapid systemic elimination, inadequate tissue absorption and degradation at alkaline pH; properties that severely curtail its bioavailability. To address this issue, CM was encapsulated within pH responsive amphiphilic chitosan, resulting in the formation of 100 nm spontaneously self-assembled polymeric micelles in water. The amphiphilic chitosan, namely N-benzyl-N,O-succinyl chitosan (BSCS), was prepared by reductive N-benzylation and N,O-succinylation. The stability of micelles after being re-dispersed in water was investigated using glycine as a cryoprotectant, and the average sizes were shown to be maintained at a level lower than 200 nm for up to 4 months, at temperatures of 4°C and 25°C. In vitro drug release results showed that CM was slowly released from the micelles without any burst effect in the intestine (pH 5.5-7.4), with limited release in the stomach (pH 1.2). Cytotoxicity assays indicated that CM loaded micelles showed half maximal inhibitory concentrations (IC50) 4.7-, 3.6-, and 12.2-fold lower than that of free CM in HeLa, SiHa and C33a cervical cell lines, respectively. Cellular uptake of micelles was confirmed by confocal laser scanning microscopy and flow cytometry, with a 6-fold significant increase in the amount of CM loaded micelles compared to free CM in all cervical cancer cells. Notably, CM loaded micelles promoted an increase (30-55%) in the percentage of early apoptosis of HeLa, SiHa and C33a cells, compared to free CM. These results suggest that BSCS micelles may be a promising carrier for effective oral delivery of CM.

Synthesis and fluorescence properties of N-substituted 1-cyanobenz[f]isoindole chitosan polymers and nanoparticles for live cell imaging

Highly fluorescent N-substituted 1-cyanobenz[f]isoindole chitosans (CBI-CSs) with various degrees of N-substitution (DS) were synthesized by reacting chitosan (CS) with naphthalene-2,3-dicarboxaldehyde (NDA) in the presence of cyanide under mild acidic conditions. Introduction of 1-cyanobenz[f]isoindole moieties into the CS backbone resulted in lowering of polymer thermal stability and crystallinity. The fluorescence quantum yield (Φf) of CBI-CS was found to be DS- and molecular-weight-dependent, with Φf decreasing as DS and molecular weight were increased. At similar DS values, CBI-CS exhibited 26 times higher Φf in comparison with fluorescein isothiocyanate-substituted chitosan (FITC-CS). CBI-CS/TPP nanoparticles were fabricated using an ionotropic gelation method in which pentasodium triphosphate (TPP) acted as a cross-linking agent. CS and CBI-CS exhibited low cytotoxicity to normal skin fibroblast cells over a concentration range of 0.1-1000 μg/mL, while an increased cytotoxicity level was evident in CBI-CS/TPP nanoparticles at concentrations greater than 100 μg/mL. In contrast with CBI-CS polymers, the CBI-CS/TPP nanoparticles exhibited lower fluorescence; however, confocal microscopy results showed that living normal skin fibroblast cells became fluorescent on nanoparticle uptake. These results suggest that CBI-CS and fabricated nanoparticles thereof may be promising fluorescence probes for live cell imaging.

Combined analysis of polycation/ODN polyplexes by analytical ultracentrifugation and dynamic light scattering reveals their size, refractive index increment, stoichiometry, porosity, and molecular weight

Analytical ultracentrifugation (AUC) and dynamic light scattering (DLS) were combined to characterize polyplexes formed with 10 kDa chitosan or 10 kDa PEI and oligodeoxynucleotides (ODN). Combined analysis revealed that both polyplexes were highly porous (over 80%) and that their weight average hydrodynamic diameters were of 46 and 55 nm for chitosan/ODN and PEI/ODN complexes, respectively. Transformation of the sedimentation coefficient distribution to a size and molecular weight distribution gave an average molecular weight of 19 and 29 MDa for chitosan and PEI polyplexes, respectively. Data from AUC also allowed for the calculation of the actual dn/dc and N/P ratios of each polyplex. Additional data from scanning electron microscopy and static light scattering confirmed the conclusions that were initially derived from AUC and DLS, thus validating that the combination of AUC and DLS is a powerful approach to characterize polyplexes in terms of refractive index increment, size, and molecular weight distributions, as well as porosity.

Synthesis, characterization, and antimicrobial activity of kojic acid grafted chitosan oligosaccharide

A novel water-soluble chitosan oligosaccharide (COS) derivative, chitosan oligosaccharide/kojic acid grafts assigned as COS/KA, was prepared by using the selective partial alkylation of N-benzylidene COS and chlorokojic acid in the presence of dimethyl sulfoxide (DMSO) and pyridine (Py). The derivative was characterized by UV-vis spectroscopy, FTIR, (1)H NMR, TGA, SEM, and XRD techniques, which showed that the alkylation reaction took place at the C-6 and C-3 positions of COS. The results showed that the degree of substitution (DS) for COS/KA was from 0.38 to 1.21, and the product exhibited an excellent solubility in organic solvents and distilled water. The antibacterial results indicated that the antibacterial activity of COS/KA was strengthened relative to COS with the increase of DS for Staphylococcus aureus , Escherichia coli , Aspergillus niger and Saccharomyces cerevisiae . These findings provide important supports for developing new antibacterial agents and expand the scope of application of COS in the food industry.

Photoluminescence from Chitosan for Bio-Imaging

Photoluminescent behaviours of chitosan were investigated. Photoluminescence can be observed from aqueous solution of chitosan, and CO2 treatment can improve the intensity of photoluminescence. The maximum emission is obtained with an excitation at ~336 nm, and the emission wavelength is dependent on the excitation wavelength with a longer excitation wavelength leading to a longer emission wavelength. The chemistry of chitosan before and after CO2 treatment was characterised; and the results reflect that carbamato anion is formed via the reaction between the amines and CO2, and is the fluorophore of the photoluminescence observed. Furthermore, chitosan was applied as an imaging agent for imaging MCF-7 cells using confocal microscopy. Blue and bright green imaging of the cells can be obtained via tuning the excitation and emission wavelength. Together with a low cytotoxicity reflected by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide evaluation, fluorescent chitosan is promising for bio-imaging.