Synthesis and Reactivity of Propargylamines in Organic Chemistry

Palladium-Catalyzed Carbo-Oxygenation of Propargylic Amines using in Situ Tether Formation

1,2-Amino alcohols and α-aminocarbonyls are frequently found in natural products, drugs, chiral auxiliaries, and catalysts. This work reports a new method for the palladium-catalyzed oxyalkynylation and oxyarylation of propargylic amines. The reaction is perfectly regioselective based on the in situ introduction of a hemiacetal tether derived from trifluoroacetaldehyde. cis-Selective carbo-oxygenation was achieved for terminal alkynes, whereas internal alkynes gave trans-carbo-oxygenation products. The obtained enol ethers could be easily transformed into 1,2-amino alcohols or α-amino ketones using hydrogenation or hydrolysis, respectively.

A comparative study on atomically precise Au nanoclusters as catalysts for the aldehyde–alkyne–amine (A3) coupling reaction: ligand effects on the nature of the catalysis and efficiency

Atomically precise Au₁₃ nanoclusters stabilized by stibines catalyze the aldehyde–alkyne–amine coupling reaction more efficiently than those stabilized by thiols or phosphines. The nature of the catalytic activity is also different, and may be attributed to the weaker coordinating ability of the stibine ligands.

A stibine-stabilised gold nanocluster which acts as a homogeneous catalyst in the A³ coupling reaction.

A simple, tandem approach to the construction of pyridine derivatives under metal-free conditions: a one-step synthesis of the monoterpene natural product, (−)-actinidine

(−)-Actinidine, along with various diversely substituted pyridines were synthesized from simple starting materials, including natural products, using a mild and metal-free method.

Metal-free synthesis of 1,N6-ethenoadenines from N6-propargyl-adenines via NIS mediated radical cascade reaction

In the present paper, an efficient approach for the construction of 1,N⁶-ethenoadenines from conveniently prepared N⁶-propargyl-adenines is developed. This reaction merges N-iodosuccinimide radical initiation and aerobic aminooxygenation in dioxane. This mild, 5-exo-dig, and metal-free cascade reaction could be applied to a wide substrate scope to provide 1,N⁶-ethenoadenines in moderate to good yields. The reaction mechanism was proposed and tested using radical inhibitor (butylated hydroxytoluene) and isotopic labelling (¹⁸O₂) experiments.

An efficient approach for the construction of 1,N⁶-ethenoadenines is developed through the metal-free mediated radical cascade cyclization of conveniently prepared N⁶-propargyl-adenines.

Synthesis of 4-styrylcoumarins via FeCl3-promoted cascade reactions of propargylamines with β-keto esters

A versatile and highly regioselective FeCl₃-promoted tandem cyclization reaction of in situ generated alkynyl o-quinone methides (o-AQMs) with β-keto esters has been developed.

Three-component difluoroalkylamination of alkenes mediated by photoredox and iron cooperative catalysis

A new three-component difluoroalkylamination of alkenes mediated by photoredox and iron cooperative catalysis has been developed with a broad substrate scope.

Solvent-free incorporation of CO2 into 2-oxazolidinones: a review

This review is an attempt to give an overview on the recent advances and developments in the synthesis of 2-oxazolidinone frameworks through carbon dioxide (CO₂) fixation reactions under solvent-free conditions. The cycloaddition of CO₂ to aziridine derivatives is discussed first. This is followed by carboxylative cyclization of N-propargylamines with CO₂ and three-component coupling of epoxides, amines, and CO₂. Finally, cycloaddition of CO₂ to propargylic alcohols and amines will be covered at the end of the review. The literature has been surveyed up until the end of 2018.

This review is an overview on the recent advances in the synthesis of 2-oxazolidinones through CO₂ fixation reactions under solvent-free conditions.

Novel ferrocene-labeled propargyl amines via CuI multicomponent amination/alkynylation

An efficient synthesis of ferrocene-tagged propargyl amine derivatives via one-pot three-component domino amination/alkynylation in water is reported.

Regiospecific formal [3 + 2] annulation of tert-propargyl alcohols with acyclic 1,3-diketones via the cycloisomerization of homoallenyl ketones

A one-pot, regiospecific synthesis of dihydrofurans bearing a quaternary centre is developed from the formal [3 + 2] annulation of tert-propargyl alcohols and 1,3-diketones through the S_N2^I mechanism to form homoallenyl ketone and a subsequent cycloisomerization reaction.

A visible-light-induced oxidative cyclization of N-propargylanilines with sulfinic acids to 3-sulfonated quinoline derivatives without external photocatalysts

A visible-light-induced oxidative cyclization of N-propargyl anilines with sulfinic acids to 3-sulfonated quinoline derivatives was developed under external photocatalyst-free conditions.

A metal-catalyzed new approach for α-alkynylation of cyclic amines

The first catalytic α-alkynylation of cyclic amines with the help of the N-propargylic group with an exclusive high E-stereoselectivity has been realized.

The first catalytic α-alkynylation of cyclic amines with the help of the N-propargylic group to afford 2-(1-alkynyl) N-allylic cyclic amines with an exclusive E-stereoselectivity for the in situ formed C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> C bond has been realized. Based on mechanistic studies, it is proven that the reaction proceeds through metal-mediated anti-1,5-hydride transfer forming an iminonium intermediate, which accepts the addition of the in situ generated 1-alkynyl metal species. The synthetic application has also been demonstrated.

Immobilized Gold Nanoparticles Prepared from Gold(III)-Containing Ionic Liquids on Silica: Application to the Sustainable Synthesis of Propargylamines

A cycloaurated phosphinothioic amide gold(III) complex was supported on amorphous silica with the aid of an imidazolium ionic liquid (IL) physisorbed in the SiO₂ pores (SiO₂⁻IL) and covalently bonded to the SiO₂ (SiO₂@IL). Gold(0) nanoparticles (AuNPs) were formed in situ and subsequently immobilized on the SiO₂⁻IL/SiO₂@IL phase. The resulting catalytic systems Au⁻SiO₂⁻IL and Au⁻SiO₂@IL promoted the solvent-free A³ coupling reaction of alkynes, aldehydes, and amines in high yields under solvent-free conditions with very low catalyst loading and without the use of additives. The Au⁻SiO₂@IL catalyst showed good recyclability and could be reused at least five times with yields of propargylamines of ≥80%. This synthetic method provides a green and low cost way to effectively prepare propargylamines. Additionally, 31P high resolution magic angle spinning (HRMAS) NMR spectroscopy is introduced as a simple technique to establish the Au loading of the catalyst.

Efficient Gold(I) Acyclic Diaminocarbenes for the Synthesis of Propargylamines and Indolizines

Mononuclear gold(I) acyclic diaminocarbenes (ADCs) were prepared by the reaction of 1,2-cyclohexanediamine with the corresponding isocyanide complexes [AuCl(CNR)] (R = Cy, t Bu). The three-component coupling of aldehydes, amines, and alkynes was investigated by using these gold(I) ADC complexes. The new gold(I) metal complexes are highly efficient catalysts for the synthesis of propargylamines and indolizines in the absence of solvent and in mild conditions. This method affords the corresponding final products with excellent yields in short reaction times. Additionally, chiral gold(I) complexes with ADCs have been prepared and tried in the enantioselective synthesis of propargylamines.

Rise of Conjugated Poly-ynes and Poly(Metalla-ynes): From Design Through Synthesis to Structure-Property Relationships and Applications

Conjugated poly-ynes and poly(metalla-ynes) constitute an important class of new materials with potential application in various domains of science. The key factors responsible for the diverse usage of these materials is their intriguing and tunable chemical and photophysical properties. This review highlights fascinating advances made in the field of conjugated organic poly-ynes and poly(metalla-ynes) incorporating group 4-11 metals. This includes several important aspects of conjugated poly-ynes viz. synthetic protocols, bonding, electronic structure, nature of luminescence, structure-property relationships, diverse applications, and concluding remarks. Furthermore, we delineated the future directions and challenges in this particular area of research.

Syntheses and Structures of d10 Coinage Metal Complexes of Electron-Accepting Phosphine Ligands Featuring a 3,3,4,4,5,5-Hexafluorocyclopentene Framework

Cu(I), Ag(I), and Au(I) complexes of monophosphine or bisphosphine ligands based on the 3,3,4,4,5,5-hexafluorocyclopentene skeleton were synthesized and structurally characterized by X-ray crystallographic analysis. The electron-withdrawing nature of these polyfluorinated phosphines was experimentally revealed via UV/vis absorption studies and crystal structure analysis. Successful catalytic application of the Au(I) complex for alkyne hydration reactions was investigated.

Csp3-H bond functionalization of amines via tunable iminium ions: divergent synthesis of trifluoromethylated arylamines

A series of tunable iminium ions, generated in situ by the condensation of 4-trifluoromethyl-p-quinols with cyclic amines, can lead to the divergent synthesis of trifluoromethylated arylamines in a single step via redox-neutral isomerization. The direct α- and β-functionalization of saturated amines can be achieved regioselectively under mild conditions.

Petasis three-component reactions for the synthesis of diverse heterocyclic scaffolds

The Petasis three-component reaction (PR) of hydroxy aldehydes, amines and boronic acids is an important multi-component reaction for the synthesis of structurally diverse scaffolds and biologically interesting small molecules. The reaction has been significantly explored in the past decade, and many new variants have emerged, such as asymmetric, traceless and four-component approaches. The excellent stereoselectivity, high yield and broad functional group tolerance altogether make this reaction ideal for fragment and compound collection synthesis, since orthogonal chemical handles can be incorporated for subsequent scaffold formation and appendage modification. Herein we present a selection of recent variations on the PR theme for the synthesis of scaffolds of relevance to medicinal chemistry.

Copper(i)/succinic acid cooperatively catalyzed one-pot synthesis of organoselenium-propargylamines via A3-coupling

Selenium propargylamines were synthesized via an A³-coupling approach using piperidine, p-methoxybenzaldehyde, and trimethylsilyl selenium–acetylene, catalyzed by copper(i) chloride and succinic acid as an additive, in good to excellent yields.

Cu3L2 metal–organic cages for A3-coupling reactions: reversible coordination interaction triggered homogeneous catalysis and heterogeneous recovery

A novel Cu₃L₂ metal–organic cage, which features coordination interaction triggered solubility, can be a highly active and reusable catalyst to homogeneously catalyse the one-pot aldehyde–alkyne–amine A³-coupling reaction.

Synthesis of highly functionalized 1,6-dihydropyridines via the Zn(OTf)2-catalyzed three-component cascade reaction of aldimines and two alkynes (IA2-coupling)

One pot Zn(ii)-catalyzed imine–alkyne–alkyne coupling.