Electronic design criteria for O-O bond formation via metal-oxo complexes

Slow magnetic relaxation in a family of trigonal pyramidal iron(II) pyrrolide complexes

We present a family of trigonal pyramidal iron(II) complexes supported by tris(pyrrolyl-α-methyl)amine ligands of the general formula [M(solv)(n)][(tpa(R))Fe] (M = Na, R = tert-butyl (1), phenyl (4); M = K, R = mesityl (2), 2,4,6-triisopropylphenyl (3), 2,6-difluorophenyl (5)) and their characterization by X-ray crystallography, Mössbauer spectroscopy, and high-field EPR spectroscopy. Expanding on the discovery of slow magnetic relaxation in the recently reported mesityl derivative 2, this homologous series of high-spin iron(II) complexes enables an initial probe of how the ligand field influences the static and dynamic magnetic behavior. Magnetization experiments reveal large, uniaxial zero-field splitting parameters of D = -48, -44, -30, -26, and -6.2 cm(-1) for 1-5, respectively, demonstrating that the strength of axial magnetic anisotropy scales with increasing ligand field strength at the iron(II) center. In the case of 2,6-difluorophenyl substituted 5, high-field EPR experiments provide an independent determination of the zero-field splitting parameter (D = -4.397(9) cm(-1)) that is in reasonable agreement with that obtained from fits to magnetization data. Ac magnetic susceptibility measurements indicate field-dependent, thermally activated spin reversal barriers in complexes 1, 2, and 4 of U(eff) = 65, 42, and 25 cm(-1), respectively, with the barrier of 1 constituting the highest relaxation barrier yet observed for a mononuclear transition metal complex. In addition, in the case of 1, the large range of temperatures in which slow relaxation is observed has enabled us to fit the entire Arrhenius curve simultaneously to three distinct relaxation processes. Finally, zero-field Mössbauer spectra collected for 1 and 4 also reveal the presence of slow magnetic relaxation, with two independent relaxation barriers in 4 corresponding to the barrier obtained from ac susceptibility data and to the 3D energy gap between the M(S) = ±2 and ±1 levels, respectively.

Pseudotetrahedral d(0), d(1), and d(2) metal-oxo cores within a tris(alkoxide) platform

Low-coordinate first-row metal complexes of d(0) [vanadium(V)], d(1) [chromium(V)], and d(2) [chromium(IV)] assume the unusual ligand field of a pseudotetrahedron when supported by a tripodal tBu(2)(Me)CO(-) alkoxide framework. Structural, spectroscopic, and reactivity studies, supported by density functional theory calculations, indicate that the d electrons in the chromium(V) and -(IV) oxo complexes reside in metal-oxygen antibonding orbitals, engendering disparate reactivity of the metal-oxo, depending on the number of d electrons present.

EPR evidence for Co(IV) species produced during water oxidation at neutral pH

Thin-film water oxidation catalysts (Co-Pi) prepared by electrodeposition from phosphate electrolyte and Co(NO(3))(2) have been characterized by electron paramagnetic resonance (EPR) spectroscopy. Co-Pi catalyst films exhibit EPR signals corresponding to populations of both Co(II) and Co(IV). As the deposition voltage is increased into the region where water oxidation prevails, the population of Co(IV) rises and the population of Co(II) decreases. The changes in the redox speciation of the film can also be induced, in part, by prolonged water oxidation catalysis in the absence of additional catalyst deposition. These results provide spectroscopic evidence for the formation of Co(IV) species during water oxidation catalysis at neutral pH.

Access to well-defined ruthenium(I) and osmium(I) metalloradicals

The first examples of well-defined mononuclear Ru(I) and Os(I) complexes have been prepared and crystallographically characterized. EPR spectroscopy and DFT calculations indicate metalloradical character. The Ru(I) and Os(I) metalloradicals exhibits both 1-electron and 2-electron redox reactivity. The latter process affords unusual imido/nitrene complexes with substantial radical character on the “ArN” moiety.

Binding and activation of N2O at transition-metal centers: recent mechanistic insights

No laughing matter, nitrous oxide's role in stratospheric ozone depletion and as a greenhouse gas has stimulated great interest in developing and understanding its decomposition, particularly through the use of transition-metal promoters. Recent advances in our understanding of the reaction pathways for N(2)O reduction by metal ions in the gas phase and in heterogeneous, homogeneous, and biological catalytic systems have provided provocative ideas about the structure and properties of metal N(2)O adducts and derived intermediates. These ideas are likely to inform efforts to design more effective catalysts for N(2)O remediation.

How active-site protonation state influences the reactivity and ligation of the heme in chlorite dismutase

Chlorite dismutase catalyzes O(2) release from chlorite with exquisite efficiency and specificity. The spectroscopic properties, ligand binding affinities, and steady-state kinetics of chlorite dismutase from Dechloromonas aromatica were examined over pH 3-11.5 to gain insight into how the protonation state of the heme environment influences dioxygen formation. An acid-base transition was observed by UV/visible and resonance Raman (rR) spectroscopy with a pK(a) of 8.7, 2-3 pH units below analogous transitions observed in typical His-ligated peroxidases. This transition marks the conversion of a five-coordinate high-spin Fe(III) to a mixed high/low-spin ferric hydroxide, as confirmed by rR spectroscopy. The two Fe-OH stretching frequencies are quite low, consistent with a weak Fe-OH bond, despite the nearly neutral imidazole side chain of the proximal histidine ligand. The hydroxide is proposed to interact strongly with a distal H-bond donor, thereby weakening the Fe-OH bond. The rR spectra of Cld-CO as a function of pH reveal two forms of the complex, one in which there is minimal interaction of distal residues with the carbonyl oxygen and another, acidic form in which the oxygen is under the influence of positive charge. Recent crystallographic data reveal arginine 183 as the lone H-bond-donating residue in the distal pocket. It is likely that this Arg is the strong, positively charged H-bond donor implicated by vibrational data to interact with exogenous axial heme ligands. The same Arg in its neutral (pK(a) approximately 6.5) form also appears to act as the active-site base in binding reactions of protonated ligands, such as HCN, to ferric Cld. The steady-state profile for the rate of chlorite decomposition is characterized by these same pK(a) values. The five-coordinate high-spin acidic Cld is more active than the alkaline hydroxide-bound form. The acid form decomposes chlorite most efficiently when the distal Arg is protonated/cationic (maximum k(cat) = 2.0(+/-0.6) x 10(5) s(-1), k(cat)/K(M) = 3.2(+/-0.4) x 10(7) M(-1) s(-1), pH 5.2, 4 degrees C) and to a somewhat lesser extent when it acts as a H-bond donor to the axial hydroxide ligand under alkaline conditions.

Isolated seven-coordinate Ru(IV) dimer complex with [HOHOH](-) bridging ligand as an intermediate for catalytic water oxidation

With the inspiration from an oxygen evolving complex (OEC) in Photosystem II (PSII), a mononuclear Ru(II) complex with a tetradentate ligand containing two carboxylate groups has been synthesized and structurally characterized. This Ru(II) complex showed efficient catalytic properties toward water oxidation by the chemical oxidant cerium(IV) ammonium nitrate. During the process of catalytic water oxidation, Ru(III) and Ru(IV) species have been successfully isolated as intermediates. To our surprise, X-ray crystallography together with HR-MS revealed that the Ru(IV) species is a seven-coordinate Ru(IV) dimer complex containing a [HOHOH](-) bridging ligand. This bridging ligand has a short O...O distance and is hydrogen bonded to two water molecules. The discovery of this very uncommon seven-coordinate Ru(IV) dimer together with a hydrogen bonding network may contribute to a deeper understanding of the mechanism for catalytic water oxidation. It will also provide new possibilities for the design of more efficient catalysts for water oxidation, which is the key step for solar energy conversion into hydrogen by light-driven water splitting, the ultimate challenge in artificial photosynthesis.

Chemistry of personalized solar energy

Personalized energy (PE) is a transformative idea that provides a new modality for the planet's energy future. By providing solar energy to the individual, an energy supply becomes secure and available to people of both legacy and nonlegacy worlds and minimally contributes to an increase in the anthropogenic level of carbon dioxide. Because PE will be possible only if solar energy is available 24 h a day, 7 days a week, the key enabler for solar PE is an inexpensive storage mechanism. HY (Y = halide or OH(-)) splitting is a fuel-forming reaction of sufficient energy density for large-scale solar storage, but the reaction relies on chemical transformations that are not understood at the most basic science level. Critical among these are multielectron transfers that are proton-coupled and involve the activation of bonds in energy-poor substrates. The chemistry of these three italicized areas is developed, and from this platform, discovery paths leading to new hydrohalic acid- and water-splitting catalysts are delineated. The latter water-splitting catalyst captures many of the functional elements of photosynthesis. In doing so, a highly manufacturable and inexpensive method for solar PE storage has been discovered.

Density functional theory for transition metals and transition metal chemistry

We introduce density functional theory and review recent progress in its application to transition metal chemistry. Topics covered include local, meta, hybrid, hybrid meta, and range-separated functionals, band theory, software, validation tests, and applications to spin states, magnetic exchange coupling, spectra, structure, reactivity, and catalysis, including molecules, clusters, nanoparticles, surfaces, and solids.

Personalized energy: the home as a solar power station and solar gas station

Point-of-use solar energy would generate the exact amount of energy any one individual needs, at the location where it is needed. Such a means of energy supply would create a revolution in society's approach to energy use, and allow a more level playing field for all. This Viewpoint considers some of the key enablers for this technology.

Mechanism of and exquisite selectivity for O-O bond formation by the heme-dependent chlorite dismutase

Chlorite dismutase (Cld) is a heme b-dependent, O-O bond forming enzyme that transforms toxic chlorite (ClO(2)(-)) into innocuous chloride and molecular oxygen. The mechanism and specificity of the reaction with chlorite and alternate oxidants were investigated. Chlorite is the sole source of dioxygen as determined by oxygen-18 labeling studies. Based on ion chromatography and mass spectrometry results, Cld is highly specific for the dismutation of chlorite to chloride and dioxygen with no other side products. Cld does not use chlorite as an oxidant for oxygen atom transfer and halogenation reactions (using cosubstrates guaiacol, thioanisole, and monochlorodimedone, respectively). When peracetic acid or H(2)O(2) was used as an alternative oxidant, oxidation and oxygen atom transfer but not halogenation reactions occurred. Monitoring the reaction of Cld with peracetic acid by rapid-mixing UV-visible spectroscopy, the formation of the high valent compound I intermediate, [(Por(*+))Fe(IV) = O], was observed [k(1) = (1.28 +/- 0.04) x 10(6) M(-1) s(-1)]. Compound I readily decayed to form compound II in a manner that is independent of peracetic acid concentration (k(2) = 170 +/- 20 s(-1)). Both compound I and a compound II-associated tryptophanyl radical that resembles cytochrome c peroxidase (Ccp) compound I were observed by EPR under freeze-quench conditions. The data collectively suggest an O-O bond-forming mechanism involving generation of a compound I intermediate via oxygen atom transfer from chlorite, and subsequent recombination of the resulting hypochlorite and compound I.

Photosystem II: The machinery of photosynthetic water splitting

This review summarizes our current state of knowledge on the structural organization and functional pattern of photosynthetic water splitting in the multimeric Photosystem II (PS II) complex, which acts as a light-driven water: plastoquinone-oxidoreductase. The overall process comprises three types of reaction sequences: (1) photon absorption and excited singlet state trapping by charge separation leading to the ion radical pair [Formula: see text] formation, (2) oxidative water splitting into four protons and molecular dioxygen at the water oxidizing complex (WOC) with P680+* as driving force and tyrosine Y(Z) as intermediary redox carrier, and (3) reduction of plastoquinone to plastoquinol at the special Q(B) binding site with Q(A)-* acting as reductant. Based on recent progress in structure analysis and using new theoretical approaches the mechanism of reaction sequence (1) is discussed with special emphasis on the excited energy transfer pathways and the sequence of charge transfer steps: [Formula: see text] where (1)(RC-PC)* denotes the excited singlet state (1)P680* of the reaction centre pigment complex. The structure of the catalytic Mn(4)O(X)Ca cluster of the WOC and the four step reaction sequence leading to oxidative water splitting are described and problems arising for the electronic configuration, in particular for the nature of redox state S(3), are discussed. The unravelling of the mode of O-O bond formation is of key relevance for understanding the mechanism of the process. This problem is not yet solved. A multistate model is proposed for S(3) and the functional role of proton shifts and hydrogen bond network(s) is emphasized. Analogously, the structure of the Q(B) site for PQ reduction to PQH(2) and the energetic and kinetics of the two step redox reaction sequence are described. Furthermore, the relevance of the protein dynamics and the role of water molecules for its flexibility are briefly outlined. We end this review by presenting future perspectives on the water oxidation process.

In situ formation of an oxygen-evolving catalyst in neutral water containing phosphate and Co2+

The utilization of solar energy on a large scale requires its storage. In natural photosynthesis, energy from sunlight is used to rearrange the bonds of water to oxygen and hydrogen equivalents. The realization of artificial systems that perform "water splitting" requires catalysts that produce oxygen from water without the need for excessive driving potentials. Here we report such a catalyst that forms upon the oxidative polarization of an inert indium tin oxide electrode in phosphate-buffered water containing cobalt (II) ions. A variety of analytical techniques indicates the presence of phosphate in an approximate 1:2 ratio with cobalt in this material. The pH dependence of the catalytic activity also implicates the hydrogen phosphate ion as the proton acceptor in the oxygen-producing reaction. This catalyst not only forms in situ from earth-abundant materials but also operates in neutral water under ambient conditions.

A ligand field chemistry of oxygen generation by the oxygen-evolving complex and synthetic active sites

Oxygen-oxygen bond formation and O2 generation occur from the S4 state of the oxygen-evolving complex (OEC). Several mechanistic possibilities have been proposed for water oxidation, depending on the formal oxidation state of the Mn atoms. All fall under two general classifications: the AB mechanism in which nucleophilic oxygen (base, B) attacks electrophilic oxygen (acid, A) of the Mn4Ca cluster or the RC mechanism in which radical-like oxygen species couple within OEC. The critical intermediate in either mechanism involves a metal oxo, though the nature of this oxo for AB and RC mechanisms is disparate. In the case of the AB mechanism, assembly of an even-electron count, high-valent metal-oxo proximate to a hydroxide is needed whereas, in an RC mechanism, two odd-electron count, high-valent metal oxos are required. Thus the two mechanisms give rise to very different design criteria for functional models of the OEC active site. This discussion presents the electron counts and ligand geometries that support metal oxos for AB and RC O-O bond-forming reactions. The construction of architectures that bring two oxygen functionalities together under the purview of the AB and RC scenarios are described.

Hangman salen platforms containing dibenzofuran scaffolds

The synthesis of salen ligands bearing two rigid dibenzofuran spacers functionalized with carboxylic acid and benzoic acid groups completes a series of "Hangman" ligands with the acid functionalities differentially extended across the molecular cleft. Stopped-flow studies show that a high-valent metal oxo intermediate is produced at Hangman platforms when H(2)O(2) is employed as a primary oxidant. The activity of this oxo species in promoting the disproportionation of hydrogen peroxide and olefin epoxidations is discussed in the context of the distance between the acid group and the metal center. The chemistry of the Hangman oxo complexes described here provides a roadmap for water-splitting chemistry.