Antibacterial activities of zinc oxide nanoparticles against Escherichia coli O157:H7

Properties of Zinc Oxide Nanoparticles and Their Activity Against Microbes

Zinc oxide is an essential ingredient of many enzymes, sun screens, and ointments for pain and itch relief. Its microcrystals are very efficient light absorbers in the UVA and UVB region of spectra due to wide bandgap. Impact of zinc oxide on biological functions depends on its morphology, particle size, exposure time, concentration, pH, and biocompatibility. They are more effective against microorganisms such as Bacillus subtilis, Bacillus megaterium, Staphylococcus aureus, Sarcina lutea, Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumonia, Pseudomonas vulgaris, Candida albicans, and Aspergillus niger. Mechanism of action has been ascribed to the activation of zinc oxide nanoparticles by light, which penetrate the bacterial cell wall via diffusion. It has been confirmed from SEM and TEM images of the bacterial cells that zinc oxide nanoparticles disintegrate the cell membrane and accumulate in the cytoplasm where they interact with biomolecules causing cell apoptosis leading to cell death.

Antagonistic effect of nano-ZnO and cetyltrimethyl ammonium chloride on the growth of Chlorella vulgaris: Dissolution and accumulation of nano-ZnO

The interaction of nanoparticles with coexisting chemicals affects the fate and transport of nanoparticles, as well as their combined effects on aquatic organisms. Here, we evaluated the joint effect of ZnO nanoparticle (nano-ZnO) and cetyltrimethyl ammonium chloride (CTAC) on the growth of Chlorella vulgaris and explored the possible mechanism. Results showed that an antagonistic effect of nano-ZnO and CTAC (0.1, 0.2 and 0.3 mg L^-1) was found because CTAC stop nano-ZnO being broken down into solution zinc ions (Zn²⁺). In the presence of CTAC, the zinc (including nano-ZnO and released Zn²⁺) showed a higher adsorption on bound extracellular polymeric substances (B-EPS) but lower accumulation in the algal cells. Moreover, we directly demonstrated that nano-ZnO was adsorbed on the algal B-EPS and entered into the algal cells by transmission electron microscope coupled with energy dispersive X-ray (TEM-EDX). Hence, these results suggested that the combined system of nano-ZnO and CTAC exhibited an antagonistic effect due to the inhibition of CTAC on dissolution of nano-ZnO and accumulation of the zinc in the algal cells.

Enhanced antibacterial activity of silver-decorated sandwich-like mesoporous silica/reduced graphene oxide nanosheets through photothermal effect

Drug resistance of bacteria has become a global health problem, as it makes conventional antibiotics less efficient. It is urgently needed to explore novel antibacterial materials and develop effective treatment strategies to overcome the drug resistance of antibiotics. Herein, we successfully synthesized silver decorated sandwich-like mesoporous silica/reduced graphene oxide nanosheets (rGO/MSN/Ag) as a novel antibacterial material through facile method. The rGO and Ag nanoparticles can be reduced in the reaction system without adding any other reductants. In addition, the rGO/MSN/Ag showed higher photothermal conversion capacity due to the modification of silver nanoparticles and exhibited excellent antibacterial activities against Pseudomonas putida, Escherichia coli and Rhodococcus at relatively low dosages, which was confirmed by the minimum inhibitory concentration (MIC) test. Meanwhile, the E. coli with a high concentration was selected for exposure using an 808 nm laser, and the antibacterial effect was obviously enhanced by the near-infrared irradiation induced photothermal effect. Moreover, the hepatocyte LO2 were used for the cytotoxicity evaluation, and the rGO/MSN/Ag showed low toxicity and were without detectable cytotoxicity at the antimicrobial dose. As the prepared rGO/MSN/Ag nanosheets have the advantages of low-cost and high antibacterial activity, they might be of promising and useful antibacterial agents for different applications.

Combined Effect of Ultrasound Stimulations and Autoclaving on the Enhancement of Antibacterial Activity of ZnO and SiO₂/ZnO Nanoparticles

This study investigates the antibacterial activity (ABA) of suspensions of pure ZnO nanoparticles (ZnO-NPs) and mesoporous silica doped with ZnO (ZnO-UVM7), as well as electrospun nanofibers containing those nanoparticles. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of these two materials were also determined under the same conditions. The results showed a concentration-dependent effect of antibacterial nanoparticles on the viability of Escherichia coli (E. coli). Moreover, the combination of the stimulations and sterilization considerably enhanced the antimicrobial activity (AMA) of the ZnO suspensions. Poly (lactic acid) (PLA) solutions in 2,2,2-trifluoroethanol (TFE) were mixed with different contents of nanoparticles and spun into nonwoven mats by the electrospinning process. The morphology of the mats was analyzed by scanning electron microscopy (SEM). The amount of nanoparticles contained in the mats was determined by thermogravimetric analysis (TGA). The obtained PLA-based mats showed a fibrous morphology, with an average diameter ranging from 350 to 450 nm, a porosity above 85%, but with the nanoparticles agglomeration on their surface. TGA analysis showed that the loss of ZnO-NPs increased with the increase of ZnO-NPs content in the PLA solutions and reached 79% for 1 wt % of ZnO-NPs, which was mainly due to the aggregation of nanoparticles in solution. The ABA of the obtained PLA mats was evaluated by the dynamic method according to the ASTM standard E2149. The results showed that, above an optimal concentration, the nanoparticle agglomeration reduced the antimicrobial efficiency of PLA mats. These mats have potential features for use as antimicrobial food packaging material.

Blue light irradiation triggers the antimicrobial potential of ZnO nanoparticles on drug-resistant Acinetobacter baumannii

Photodynamic inactivation (PDI) is a non-invasive and safe therapeutic method for microbial infections. Bacterial antibiotic resistance is caused by antibiotics abuse. Drug-resistant Acinetobacter spp. is a serious problem in hospitals around the world. These pathogens from nosocomial infections have high mortality rates in frailer people, and Acinetobacter spp. is commonly found in immunocompromised patients. Visible light is safer than ultraviolet light (UV) for PDI of nosocomial pathogens with mammalian cells. Zinc oxide nanoparticles (ZnO-NPs) were used in this study as an antimicrobial agent and a photosensitizer. ZnO is recognized as safe and has extensive usage in food additives, medical and cosmetic products. In this study, we used 0.125 mg/ml ZnO-NPs combined with 10.8 J/cm² blue light (BL) on Acinetobacter baumannii (A. baumannii) that could significantly reduce microbial survival. However, individual exposure to ZnO-NPs does not affect the viability of A. baumannii. BL irradiation could trigger the antimicrobial ability of ZnO nanoparticles on A. baumannii. The mechanism of photocatalytic ZnO-NPs treatment for sterilization occurs through bacterial membrane disruptions. Otherwise, the photocatalytic ZnO-NPs treatment showed high microbial eradication in nosocomial pathogens, including colistin-resistant and imipenem-resistant A. baumannii and Klebsiella pneumoniae. Based on our results, the photocatalytic ZnO-NPs treatment could support hygiene control and clinical therapies without antibiotics to nosocomial bacterial infections.

Efficient coverage of ZnO nanoparticles on cotton fibres for antibacterial finishing using a rapid and low cost in situ synthesis

Antibacterial fabric using a simple, reproducible and low cost technique to synthesize high-quality ZnONPs was prepared and characterized.

Antibacterial activity of trimetal (CuZnFe) oxide nanoparticles

Background

The increasing resistance of pathogenic bacteria to antibiotics is a challenging worldwide health problem that has led to the search for new and more efficient antibacterial agents. Nanotechnology has proven to be an effective tool for the fight against bacteria.

Methods

In this paper, we present the synthesis and traits of trimetal (CuZnFe) oxide nanoparticles (NPs) using X-ray diffraction, high-resolution transmission electron microscopy, and energy dispersive x-ray spectroscopy. We evaluated the antibacterial activity of these NPs against gram-negative Escherichia coli and gram-positive Enterococcus faecalis and then compared it to that of their pure single-metal oxide components CuO and ZnO.

Results

Our study showed that the antibacterial activity of the trimetal oxide NPs was greater against E. coli than against E. faecalis. Overall, the antimicrobial effect of trimetal NPs is between those of pure ZnO and CuO nanoparticles, which may mean that their cytotoxicity is also between that of pure ZnO and CuO NPs, making them potential antibiotics. However, the cytotoxicity of trimetal NPs to mammalian cells needs to be verified.

Conclusion

The combination of three metal oxide NPs (ZnO, CuO, and Fe₂O₃) in one multimetal (CuZnFe) oxide NPs will enhance the therapeutic strategy against a wide range of microbial infections. Bacteria are unlikely to develop resistance against this new NP because bacteria must go through a series of mutations to become resistant to the trimetal oxide NP. Therefore, this NP can combat existing and emerging bacterial infections.

Effects of humic acid on the interactions between zinc oxide nanoparticles and bacterial biofilms

The effects of humic acid (HA) on interactions between ZnO nanoparticles (ZnO NPs) and Pseudomonas putida KT2440 biofilms at different maturity stages were investigated. Three stages of biofilm development were identified according to bacterial adenosine triphosphate (ATP) activity associated with biofilm development process. In the initial biofilm stage 1, the ATP content of bacteria was reduced by more than 90% when biofilms were exposed to ZnO NPs. However, in the mature biofilm stages 2 and 3, the ATP content was only slightly decreased. Biofilms at stage 3 exhibited less susceptibility to ZnO NPs than biofilms at stage 2. These results suggest that more mature biofilms have a significantly higher tolerance to ZnO NPs compared to young biofilms. In addition, biofilms with intact extracellular polymeric substances (EPS) showed higher tolerance to ZnO NPs than those without EPS, indicating that EPS play a key role in alleviating the toxic effects of ZnO NPs. In both pure ZnO NPs and ZnO-HA mixtures, dissolved Zn²⁺ originating from the NPs significantly contributed to the overall toxicity. The presence of HA dramatically decreased the toxicity of ZnO NPs due to the binding of Zn²⁺ on HA. The combined results from this work suggest that the biofilm maturity stages and environmental constituents (such as humic acid) are important factors to consider when evaluating potential risks of NPs to ecological systems.

Nanoscale wide-band semiconductors for photocatalytic remediation of aquatic pollution

Water pollution is a serious challenge to the public health. Among different forms of aquatic pollutants, chemical and biological agents create paramount threat to water quality when the safety standards are surpassed. There are many conventional remediatory strategies that are practiced such as resin-based exchanger and activated charcoal/carbon andreverse osmosis. Newer technologies using plants, microorganisms, genetic engineering, and enzyme-based approaches are also proposed for aquatic pollution management. However, the conventional technologies have shown impending inadequacies. On the other hand, new bio-based techniques have failed to exhibit reproducibility, wide specificity, and fidelity in field conditions. Hence, to solve these shortcomings, nanotechnology ushered a ray of hope by applying nanoscale zinc oxide (ZnO), titanium dioxide (TiO₂), and tungsten oxide (WO₃) particles for the remediation of water pollution. These nanophotocatalysts are active, cost-effective, quicker in action, and can be implemented at a larger scale. These nanoparticles are climate-independent, assist in complete mineralization of pollutants, and can act non-specifically against chemically and biologically based aquatic pollutants. Photocatalysis for environmental remediation depends on the availability of solar light. The mechanism of photocatalysis involves the formation of electron-hole pairs upon light irradiations at intensities higher than their band gap energies. In the present review, different methods of synthesis of nanoscale ZnO, TiO₂, and WO₃ as well as their structural characterizations have been discussed. Photodegradation of organic pollutants through mentioned nanoparticles has been reviewed with recent advancements. Enhancing the efficacy of photocatalysis through doping of TiO₂ and ZnO nanoparticles with non-metals, metals, and metal ions has also been documented in this report.

Emerging nanotechnology based strategies for diagnosis and therapeutics of urinary tract infections: A review

At present, various diagnostic and therapeutic approaches are available for urinary tract infections. But, still the quest for development of more rapid, accurate and reliable approach is an unending process. The pathogens, especially uropathogens are adapting to new environments and antibiotics day by day rapidly. Therefore, urinary tract infections are evolving as hectic and difficult to eradicate, increasing the economic burden to the society. The technological advances should be able to compete the adaptability characteristics of microorganisms to combat their growth in new environments and thereby preventing their infections. Nanotechnology is at present an extensively developing area of immense scientific interest since it has diverse potential applications in biomedical field. Nanotechnology may be combined with cellular therapy approaches to overcome the limitations caused by conventional therapeutics. Nanoantibiotics and drug delivery using nanotechnology are currently growing areas of research in biomedical field. Recently, various categories of antibacterial nanoparticles and nanocarriers for drug delivery have shown their potential in the treatment of infectious diseases. Nanoparticles, compared to conventional antibiotics, are more beneficial in terms of decreasing toxicity, prevailing over resistance and lessening costs. Nanoparticles present long term therapeutic effects since they are retained in body for relatively longer periods. This review focuses on recent advances in the field of nanotechnology, principally emphasizing diagnostics and therapeutics of urinary tract infections.

Strong Near-Infrared Absorbing and Biocompatible CuS Nanoparticles for Rapid and Efficient Photothermal Ablation of Gram-Positive and -Negative Bacteria

Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) are the most common infectious bacteria in our daily life, and seriously affect human's health. Because of the frequent and extensive use of antibiotics, the microbial strains forming drug resistance have become more and more difficult to deal with. Herein, we utilized bovine serum albumin (BSA) as the template to synthesize uniform copper sulfide (CuS) nanoparticles via a biomineralization method. The as-prepared BSA-CuS nanocomposites showed good biocompatibility and strong near-infrared absorbance performance and can be used as an efficient photothermal conversion agent for pathogenic bacteria ablation with a 980 nm laser at a low power density of 1.59 W/cm². The cytotoxicity of BSA-CuS nanocomposite was investigated using skin fibroblast cells and displayed good biocompatibility. Furthermore, the antibacterial tests indicated that BSA-CuS nanocomposite showed no antibacterial activity without NIR irradiation. In contrast, they demonstrated satisfying killing bacterial ability in the presence of NIR irradiation. Interestingly, S. aureus and E. coli showed various antibacterial mechanisms, possibly because of the different architectures of bacterial walls. Considering the low cost, easy preparation, excellent biocompatibility and strong photothermal convention efficiency (24.68%), the BSA-CuS nanocomposites combined with NIR irradiation will shed bright light on the treatment of antibiotic-resistant pathogenic bacteria.

Efficient antibacterial nanosponges based on ZnO nanoparticles and doxycycline

Bacterial soft rot is responsible for the loss of about 25% of worldwide production in vegetables and fruits. Efforts have been made to develop an effective nanosponge with the capacity to load and release antibacterial drugs to protect plants. Based on the potential of the ZnO nanoparticles (ZnO-NPs) to achieve this goal, this study synthesized NP via the sol-gel and hydrothermal methods by controlling native defects, such as oxygen vacancies, using thermal treatments and reduced atmospheres. To characterize the ZnO NPs, X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), optical spectroscopy, electron paramagnetic resonance (EPR), Zeta Potential measurements and surface area with the Brunauer-Emmett-Teller (BET) method were used. The photophysical and photochemical properties via spin trapping method aligned with EPR using UVA light showed a greater formation of electron-hole pairs and hydroxyl radicals for the reduced ZnO NPs when compared with the oxidized ones. Additionally, we found that reduced ZnO-NPs have high effectively against Escherichia coli, Erwinia carotovora and Pantoea sp. bacteria using the photocatalytic effect in the UV range. Moreover, ZnO-NPs loaded with DOX release profile enables the release of DOX within 46days, where 25% was released during the first 10h followed by a second delivery phase with an interesting short-term efficacy (<1day) against E. carotovora and Pantoea sp. Bacteria. For the first time, it was demonstrated that ZnO-NPs and ZnO-NPs loaded with DOX have efficient UV photocatalytic activities against bacterial soft rot infections.

Macromolecular agents with antimicrobial potentialities: A drive to combat antimicrobial resistance

In recent years, the antimicrobial resistance (AMR) or multidrug resistance (MDR) has become a serious health concern and major challenging issue, worldwide. After decades of negligence, the AMR has now captured global attention. The increasing number of antibiotic-resistant strains has threatened the achievements of science and medicine since it inactivates conventional antimicrobial therapeutics. Scientists are trying to respond to AMR/MDR threat by exploring innovative platforms and new therapeutic strategies to tackle infections from these resistant strains and bypass treatment limitations related to these pathologies. The present review focuses on the utilization of bio-inspired novel constructs and their potential applications as novel antimicrobial agents. The first part of the review describes plant-based biological macromolecules containing an immense variety of secondary metabolites, which could be potentially used as alternative strategies to combat antimicrobial resistance. The second part discusses the potential of metal-based macromolecules as effective antimicrobial platforms for preventing infections from resistant strains. The third part comprehensively elucidates how nanoparticles, in particular, metal-integrated nanoparticles can overcome this AMR or MDR issue. Towards the end, information is given with critical concluding remarks, gaps, and finally envisioned with future considerations.

The use of unirradiated and γ-irradiated zinc oxide nanoparticles as a preservative in cosmetic preparations

Purpose

Microbial contamination of different cosmetic preparations, as a result of preservative failure, presents a major public health threat. Also, most of the known preservatives have serious consumer side effects. The antimicrobial activity of zinc oxide nanoparticles (ZnO NP) is well documented. Therefore, we aimed to determine the possible use of unirradiated and γ-irradiated ZnO NP as a cosmetic preservative.

Methods

The possible use of ZnO NP as a preservative was tested and compared to commonly used preservatives using a challenge test. Their activity was tested in six different types of preparations. The effect of γ radiation on the antimicrobial activity of ZnO NP was tested through determination of the obtained zone diameters against different microorganisms and the total aerobic microbial count in tested preparations. The antimicrobial activity, of unirradiated and γ-irradiated ZnO NP during storage was also determined.

Results

ZnO NP were superior to other commonly used preservatives in all tested cosmetic preparations. They pass the challenge test in all types of tested preparations. γ irradiation enhanced their antimicrobial activity in all tested preparations. The irradiation causes a reduction in NP sizes that is directly proportional to the applied radiation dose. Upon storage, ZnO NP were effective in maintaining the microbial count of the product within the acceptable range. Their activity in stored products was enhanced by γ irradiation.

Conclusion

Unirradiated and γ-irradiated ZnO NP can be used as effective preservatives. They are compatible with the components of all tested products. γ irradiation enhanced the antimicrobial activity of ZnO NP.

Metal-Based Nanoparticles for the Treatment of Infectious Diseases

Infectious diseases can be transmitted and they cause a significant burden on public health globally. They are the greatest world killers and it is estimated that they are responsible for the demise of over 17 million people annually. The impact of these diseases is greater in the developing countries. People with compromised immune systems and children are the most affected. Infectious diseases may be caused by bacteria, viruses, and protozoa. The treatment of infectious diseases is hampered by simultaneous resistance to multiple drugs, indicating that there is a serious and pressing need to develop new therapeutics that can overcome drug resistance. This review will focus on the recent reports of metal-based nanoparticles that are potential therapeutics for the treatment of infectious diseases and their biological efficacy (in vitro and in vivo).

Sageretia thea (Osbeck.) mediated synthesis of zinc oxide nanoparticles and its biological applications

Aim: To investigate the physical and biological properties of bioinspired zinc oxide (ZnO) nanoparticles via aqueous leaf extracts of Sageretia thea. Experimental: Nanoparticles of size approximately 12.4 nm were extensively characterized. In vitro antimicrobial, cytotoxic, biocompatible and enzyme inhibition assays were performed. Results: Significant antimicrobial activities with and without UV illumination are reported. Bioinspired ZnO nanoparticles were found effective against fungal strains. MTT assay was performed to check the leishmanicidal activity against promastigotes (IC50: 6.2 μg/ml) and amastigotes (IC50: 10.87 μg/ml) of Leishmania tropica. Brine shrimp lethality was also indicated by bioinspired ZnO nanoparticles (IC50: 21.29 μg/ml). Conclusion: Hemocompatible nature of bioinspired nanoparticles was revealed. Furthermore, the antioxidant activities were performed. In addition, significant protein kinase while insignificant alpha amylase inhibition were recorded.

Zinc oxide nanoparticles as a substitute for zinc oxide or colistin sulfate: Effects on growth, serum enzymes, zinc deposition, intestinal morphology and epithelial barrier in weaned piglets

The objective of this study was to evaluate effects of zinc oxide nanoparticles (nano-ZnOs) as a substitute for colistin sulfate (CS) and/or zinc oxide (ZnO) on growth performance, serum enzymes, zinc deposition, intestinal morphology and epithelial barrier in weaned piglets. A total of 216 crossbred Duroc×(Landrace×Yorkshire) piglets weaned at 23 days were randomly assigned into 3 groups, which were fed with basal diets supplemented with 20 mg/kg CS (CS group), 20mg/kg CS+3000 mg/kg ZnO (CS+ZnO group), and 1200 mg/kg nano-ZnOs (nano-ZnO group) for 14 days. Results indicated that compared to CS group, supplementation of 1200 mg/kg nano-ZnOs (about 30 nm) significantly increased final body weight and average daily gain, and 3000 mg/kg ZnO plus colistin sulfate significantly increased average daily gain and decreased diarrhea rate in weaned piglets. There was no significant difference in growth performance and diarrhea rate between nano-ZnO and CS+ZnO groups. Supplementation of nano-ZnOs did not affect serum enzymes (glutamic oxalacetic transaminase, glutamic-pyruvic transaminase, and lactate dehydrogenase), but significantly increased plasma and tissue zinc concentrations (liver, tibia), improved intestinal morphology (increased duodenal and ileal villus length, crypt depth, and villus surface), enhanced mRNA expression of ZO-1 in ileal mucosa, and significantly decreased diamine oxidase activity in plasma, total aerobic bacterial population in MLN as compared to CS group. Effects of nano-ZnOs on serum enzymes, intestinal morphology, and mRNA expressions of tight junction were similar to those of high dietary ZnO plus colistin sulfate, while nano-ZnOs significantly reduced zinc concentrations of liver, tibia, and feces, and decreased total aerobic bacterial population in MLN as compared to CS+ZnO group. These results suggested that nano-ZnOs (1200 mg/kg) might be used as a substitute for colistin sulfate and high dietary ZnO in weaned piglets.

Rubber elastomeric nanocomposites with antimicrobial properties

In this paper we show an elastomeric nanocomposite that exhibits antibacterial and antifungal activity. It comprises a rubber blend matrix and a nanofiller, which is a modified bentonite clay (Nanobent® ZR2). We have developed innovative technology for the nanofiller incorporation into the rubber matrix. This new approach was successfully implemented in pilot production at the Polish chemical manufacturer Spoiwo (Spoldzielnia Pracy Chemiczno-Wytworczej 'Spoiwo', Radom, Poland). Here we reveal that addition of the functionalised bentonite affects the mechanical and thermal behaviour of elastomers. For example, by adding 1-3% of bentonite nanoparticles we strongly enhanced elongation and tensile stress at break, whereas stiffness remained unchanged. We observed improvement of the thermal properties of the nanocomposites yielded and extension of the temperature usage range (from -29 to 311°C). As a proof of concept we present the antimicrobial effect of elastomeric nanocomposites verified on a wide range of both pathogenic and opportunistic reference bacteria strains, as well as reference strains of yeasts. The proposed method of hydrophilic nanofiller introduction into the rubber elastomer is economically viable and enables fabrication of elastomeric elements with high added value. Their significant antibacterial and antifungal activity makes them desirable in medicine, biomedical engineering, and the food industry.

Nanotechnology in Sustainable Agriculture: Recent Developments, Challenges, and Perspectives

Nanotechnology monitors a leading agricultural controlling process, especially by its miniature dimension. Additionally, many potential benefits such as enhancement of food quality and safety, reduction of agricultural inputs, enrichment of absorbing nanoscale nutrients from the soil, etc. allow the application of nanotechnology to be resonant encumbrance. Agriculture, food, and natural resources are a part of those challenges like sustainability, susceptibility, human health, and healthy life. The ambition of nanomaterials in agriculture is to reduce the amount of spread chemicals, minimize nutrient losses in fertilization and increased yield through pest and nutrient management. Nanotechnology has the prospective to improve the agriculture and food industry with novel nanotools for the controlling of rapid disease diagnostic, enhancing the capacity of plants to absorb nutrients among others. The significant interests of using nanotechnology in agriculture includes specific applications like nanofertilizers and nanopesticides to trail products and nutrients levels to increase the productivity without decontamination of soils, waters, and protection against several insect pest and microbial diseases. Nanotechnology may act as sensors for monitoring soil quality of agricultural field and thus it maintain the health of agricultural plants. This review covers the current challenges of sustainability, food security and climate change that are exploring by the researchers in the area of nanotechnology in the improvement of agriculture.

Zinc Oxide Nanoparticles Influence Microflora in Ileal Digesta and Correlate Well with Blood Metabolites

Zinc oxide nanoparticles (ZnO NPs) are used widely in consumer and industrial products, however, their influence on gut microbiota and metabolism and their mutual interactions are not fully understood. In this study, the effects of ZnO NPs on ileal bacterial communities, plasma metabolites, and correlations between them were investigated. Hens were fed with different concentrations of ZnO NPs [based on Zn; 0 mg/kg (control), 25 mg/kg, 50 mg/kg, and 100 mg/kg] for 9 weeks. Subsequently, ileal digesta and blood plasma were collected for analysis of microflora and metabolites, respectively. The V3-V4 region of the 16S rRNA gene of ileal digesta microbiota was sequenced using the Illumina HiSeq 2500 platform. The predominant bacterial community in the ileum belongs to the phylum Firmicutes. The richness of the bacterial community was negatively correlated with increasing amounts of ZnO NPs (r = -0.636, P < 0.01); when ZnO NP levels were at 100 mg/kg, microbiota diversity was significantly decreased (P < 0.05). The community structure determined by LEfSe analysis indicated that Bacilli, Fusobacteria, and Proteobacteria were changed, and Lactobacillus was reduced by ZnO NPs. Moreover, metabolism as analyzed by nuclear magnetic resonance (NMR) indicated that glucose, some amino acids, and other metabolites were changed by ZnO NPs. Choline, lactate, and methionine were positively correlated with bacterial richness. In summary, ZnO NPs could influence the levels of microflora in ileal digesta, particularly Lactobacillus. Furthermore, the richness of the microbiota was related to changes in choline, lactate, and methionine metabolism.

Multifunctional Hydrogels Prepared by Dual Ion Cross-Linking for Chronic Wound Healing

The creation of a moist environment and promotion of blood vessel formation are critical for wound healing. Sodium alginate (SA) hydrogel, which has good biocompatibility and is able to provide a moist environment, has been widely used as a wound dressing. However, it lacks antibacterial ability and bioactivities, which would facilitate chronic wound healing. On the basis of the gelation characteristics of SA and the bioactive hardystonite (HS) bioceramic, we designed a unique, bioactive, injectable composite hydrogel through double ion cross-linking, in which divalent ions, such as Ca²⁺ and Zn²⁺ function as cross-linkers; Zn²⁺ also functions as an antibacterial component and as nutrition for wound healing, and Si ions play a key role in determining the bioactivity of the hydrogel. With the controlled release of divalent ions, such as Ca²⁺ and Zn²⁺ from HS, the gelation process of the composite hydrogel could be efficiently controlled. In addition, in vitro results reveal that the composite hydrogel stimulated proliferation and migration of both human dermal fibroblasts and human umbilical vein endothelial cells, and the in vivo results show that the wound-healing process is obviously enhanced, and the formation of epithelium and blood vessels are evidently advanced. This study indicates the potential of the SA/HS hydrogel as a multifunctional injectable wound dressing with the ability to inhibit bacterial growth and stimulate angiogenesis and wound healing.

Metal homeostasis in bacteria: the role of ArsR-SmtB family of transcriptional repressors in combating varying metal concentrations in the environment

Bacterial infections cause severe medical problems worldwide, resulting in considerable death and loss of capital. With the ever-increasing rise of antibiotic-resistant bacteria and the lack of development of new antibiotics, research on metal-based antimicrobial therapy has now gained pace. Metal ions are essential for survival, but can be highly toxic to organisms if their concentrations are not strictly controlled. Through evolution, bacteria have acquired complex metal-management systems that allow them to acquire metals that they need for survival in different challenging environments while evading metal toxicity. Metalloproteins that controls these elaborate systems in the cell, and linked to key virulence factors, are promising targets for the anti-bacterial drug development. Among several metal-sensory transcriptional regulators, the ArsR-SmtB family displays greatest diversity with several distinct metal-binding and nonmetal-binding motifs that have been characterized. These prokaryotic metolloregulatory transcriptional repressors represses the expression of operons linked to stress-inducing concentrations of metal ions by directly binding to the regulatory regions of DNA, while derepression results from direct binding of metal ions by these homodimeric proteins. Many bacteria, e.g., Mycobacterium tuberculosis, Bacillus anthracis, etc., have evolved to acquire multiple metal-sensory motifs which clearly demonstrate the importance of regulating concentrations of multiple metal ions. Here, we discussed the mechanisms of how ArsR-SmtB family regulates the intracellular bioavailability of metal ions both inside and outside of the host. Knowledge of the metal-challenges faced by bacterial pathogens and their survival strategies will enable us to develop the next generation drugs.

Comparative cytotoxicity of nanoparticles and ions to Escherichia coli in binary mixtures

The objective of this study was to understand toxicity of mixture of nanoparticles (NPs) (ZnO and TiO₂) and their ions to Escherichia coli. Results indicated the decrease in percentage growth of E. coli with the increase in concentration of NPs both in single and mixture setups. Even a small concentration of 1mg/L was observed to be significantly toxic to E. coli in binary mixture setup (exposure concentration: 1mg/L ZnO and 1mg/L TiO₂; 21.15% decrease in plate count concentration with respect to control). Exposure of E. coli to mixture of NPs at 1000mg/L (i.e., 1000mg/L ZnO and 1000mg/L TiO₂) resulted in 99.63% decrease in plate count concentration with respect to control. Toxic effects of ions to E. coli were found to be lesser than their corresponding NPs. The percentage growth reduction was found to be 36% for binary mixture of zinc and titanium ions at the highest concentration (i.e., 803.0mg/L Zn and 593.3mg/L Ti where ion concentrations are equal to the Zn ions present in 1000mg/L ZnO NP solution and Ti⁺⁴ ions present in 1000mg/L TiO₂ NP solution). Nature of mixture toxicity of the two NPs to E. coli was found to be antagonistic. The alkaline phosphatase (Alp) assay indicated that the maximum damage was observed when E. coli was exposed to 1000mg/L of mixture of NPs. This study tries to fill the knowledge gap on information of toxicity of mixture of NPs to bacteria which has not been reported earlier.

Patient-specific 3D scanned and 3D printed antimicrobial polycaprolactone wound dressings

The increasing prevalence of wound infections caused by antibiotic resistant bacteria is an urgent challenge facing modern medicine. To address this issue the expedient use of antimicrobial metals such as zinc, copper and silver were incorporated into an FDA-approved polymer (polycaprolactone - PCL) to produce filaments for 3D printing. These metals have broad-spectrum antimicrobial properties, and moreover, copper and zinc can enhance the wound healing process. 3D scanning was used to construct 3D models of a nose and ear to provide the opportunity to customize shape and size of a wound dressing to an individual patient. Hot melt extrusion was used to extrude pellets obtained by vacuum-drying of solutions of PCL and the different metals in order to manufacture metal-homogeneously-loaded filaments. Wound dressings with different shapes were produced with the filaments containing different concentrations of metals. Release of the metals from the dressings was determined by inductively coupled plasma atomic emission spectroscopy. All the different metal dressings show fast release (up to 24h) followed by slow release (up to 72h). The antibacterial efficacy of the wound dressings was tested using a thermal activity monitor system, revealing that silver and copper wound dressings had the most potent bactericidal properties. This study shows that 3D scanning and 3D printing, which are becoming simpler and more affordable, have the potential to offer solutions to produce personalised wound dressings.

Engineered Nanoparticles as Potential Food Contaminants and Their Toxicity to Caco-2 Cells

Engineered nanoparticles (ENPs), such as metallic or metallic oxide nanoparticles (NPs), have gained much attention in recent years. Increasing use of ENPs in various areas may lead to the release of ENPs into the environment and cause the contamination of agricultural and food products by ENPs. In this study, we selected two important ENPs (zinc oxide [ZnO] and silver [Ag] NPs) as potential food contaminants and investigated their toxicity via an in vitro model using Caco-2 cells. The physical properties of ENPs and their effects on Caco-2 cells were characterized by electron microscopy and energy dispersive X-ray spectroscopic (EDS) techniques. Results demonstrate that a significant inhibition of cell viability was observed after a 24-h of exposure of Caco-2 cells to 3-, 6-, and 12-mM ZnO NPs or 0.5-, 1.5-, and 3-mM Ag NPs. The noticeable changes of cells include the alteration in cell shape, abnormal nuclear structure, membrane blebbing, and cytoplasmic deterioration. The toxicity of ZnO NPs, but not that of Ag NPs after exposure to simulated gastric fluid, significantly decreased. Scanning transmission electron microscopy shows that ZnO and Ag NPs penetrated the membrane of Caco-2 cells. EDS results also confirm the presence of NPs in the cytoplasm of the cells. This study demonstrates that ZnO and Ag NPs have cytotoxic effects and can inhibit the growth of Caco-2 cells.

Synthesis and performance of antifouling and self-cleaning polyethersulfone/graphene oxide composite membrane functionalized with photoactive semiconductor catalyst

This study was performed to synthesize membranes of polyethersulfone (PES) blended with graphene oxide (GO) and PES blended with GO functionalized with photoactive semiconductor catalyst (TiO₂ and ZnO). The antifouling and self-cleaning properties of composite membranes were also investigated. The GO was prepared from natural graphite powder by oxidation method at low temperature. TiO₂ and ZnO nanopowders were synthesized by anhydrous sol-gel method. The surface of TiO₂ and ZnO nanopowders was modified by a surfactant (myristic acid) to obtain a homogeneously dispersed mixture in a solvent, and then GO was functionalized by loading with these metal oxide nanopowders. The PES membranes blended with GO and functionalized GO into the casting solution were prepared via phase inversion method and tested for their antifouling as well as self-cleaning properties. The composite membranes were synthesized as 14%wt. of PES polymer with three different concentrations (0.5, 1.0, and 2.0%wt.) of GO, GO-TiO₂, and GO-ZnO. The functionalization of membranes improved hydrophilicity property of membranes as compared to neat PES membrane. However, the lowest flux was obtained by functionalized membranes with GO-TiO₂. The results showed that functionalized membranes demonstrated better self-cleaning property than neat PES membrane. Moreover, the flux recovery rate of functionalized membranes over five cycles was higher than that of neat membrane.

Advances in Nanotechnology as They Pertain to Food and Agriculture: Benefits and Risks

Nanotechnology is an emerging and rapidly developing toolbox that has novel and unique applications to food science and agriculture. Fast and impressive developments in nanotechnology for food and agriculture have led to new experimental prototype technologies and products. Developing various types of nanodelivery systems, detection tools, nanoscale modifications of bulk or surface properties, fabrication of wide-range bionanosensors, and biodegradable nanoplatforms can potentially improve consumer health and safety, product shelf life and stability, bioavailability, environmental sustainability, efficiency of processing and packaging, and real-time monitoring. Some recently developed nanotechnology techniques and potential product applications of nanotechnology are summarized in this review. Exposure to nanomaterials may be harmful to the consumer and the environment and might increase the potential of risk. For this reason, evaluation of the potential risks resulting from the interaction of nanomaterials with biological systems, humans, and the environment is also reviewed.

Metal oxide nanoparticles as antimicrobial agents: a promise for the future

Microbial infectious diseases are a global threat to human health. Excess and improper use of antibiotics has created antimicrobial-resistant microbes that can defy clinical treatment. The hunt for safe and alternate antimicrobial agents is on in order to overcome such resistant micro-organisms, and the birth of nanotechnology offers promise to combat infectious organisms. Over the past two decades, metal oxide nanoparticles (MeO-NPs) have become an attractive alternative source to combat microbes that are highly resistant to various classes of antibiotics. Their vast array of physicochemical properties enables MeO-NPs to act as antimicrobial agents through various mechanisms. Apart from exhibiting antimicrobial properties, MeO-NPs also serve as carriers of drugs, thus barely providing a chance for micro-organisms to develop resistance. These immense multiple properties exhibited by MeO-NPs will have an impact on the treatment of deadly infectious diseases. This review discusses the mechanisms of action of MeO-NPs against micro-organisms, safety concerns, challenges and future perspectives.

Synthesis and antibacterial effects of cobalt–cellulose magnetic nanocomposites

Green synthesis is employed to prepare cobalt/cellulose nanocomposites with antibacterial and magnetic properties. The cellulose-stabilised, cubic (α-cobalt) cobalt nanoclusters are distributed evenly over the surface of the cellulose fibres.

Functionalization of nanostructures for antibiotic improvement: an interdisciplinary approach

The resistance of infectious bacteria to current antibiotics is a worldwide problem caused, partially, by the overuse of antimicrobials. The use of nanotechnology as an innovative tool against bacterial infections provides a range of methodologies to redesign old antibiotics for novel and remarkable new strategies. Thus, functionalized antibiotics present structures with improved bioavailability, low toxicity and specificity to bacterial membrane. In this context, this review will describe the use of nanotechnology as an innovative tool to functionalize antibiotics. In addition, the importance of the interdisciplinary context to understand, develop and apply these systems as an innovative tool for drug development and improvement is discussed.

Nanoparticles and nanofibers for topical drug delivery

This review provides the first comprehensive overview of the use of both nanoparticles and nanofibers for topical drug delivery. Researchers have explored the use of nanotechnology, specifically nanoparticles and nanofibers, as drug delivery systems for topical and transdermal applications. This approach employs increased drug concentration in the carrier, in order to increase drug flux into and through the skin. Both nanoparticles and nanofibers can be used to deliver hydrophobic and hydrophilic drugs and are capable of controlled release for a prolonged period of time. The examples presented provide significant evidence that this area of research has - and will continue to have - a profound impact on both clinical outcomes and the development of new products.

Toxicity mechanism of titanium dioxide and zinc oxide nanoparticles against food pathogens

Food preservation is an important field of research. It extends the shelf life of major food products. Our current study is based on food preservation through TiO₂ and ZnO nanoparticles. TiO₂ and ZnO are biocompatible nanomaterial. The biocompatibility of the materials were established through toxicity studies on cell lines. Titanium dioxide and Zinc Oxide nanoparticle were synthesized by wet chemical process. They are characterized by X-Ray diffraction and TEM. The antibacterial activities of both the materials were analysed to ensure their effectiveness as food preservative against Salmonella typhi, Klebsiella pneumoniae and Shigella flexneri. The results indicates that TiO₂ and ZnO nanoparticle inhibits Salmonella, Klebsiella and Shigella. The mode of action is by the generation of ROS in cases of Salmonella, Klebsiella. Mode of action in Shigella is still unclear. It was also proved that TiO₂ and ZnO nanoparticle are biocompatible materials.

Role of physical and chemical interactions in the antibacterial behavior of ZnO nanoparticles against E. coli

Zinc oxide (ZnO) nanoparticles (NPs) exhibit antibacterial activity against both Gram-positive and Gram-negative bacteria. However, the antimicrobial mechanism of ZnO NPs remains unclear. In this study, we investigated the interactions among ZnO NPs, released chemicals (Zn(2+) and Reactive Oxygen Species, ROS) and Escherichia coli (E. coli) cells. ZnO NPs without contacting with bacterial cells showed strong antibacterial effect. The results of the leakage of intracellular K(+) and integrity of carboxyfluoresce in-filled liposomes showed that ZnO NPs have antimicrobial activity against E. coli by non-specifically disrupting E. coli membranes. Traces of zinc ions (1.25mg/L) and hydrogen peroxide (from 1.25 to 4.5μM/L) were detected in ZnO NPs suspensions, but was insufficient to cause the antibacterial effect. However, the addition of radical scavengers suppressed the bactericidal effect of ZnO coated films against E. coli, potentially implicating ROS generation, especially hydroxyl radicals, in the antibacterial ability of ZnO NPs.

Calixarene Assisted Rapid Synthesis of Silver-Graphene Nanocomposites with Enhanced Antibacterial Activity

Demonstrated herein is a single rapid approach employed for synthesis of Ag-graphene nanocomposites, with excellent antibacterial properties and low cytotoxicity, by utilizing a continuous hydrothermal flow synthesis (CHFS) process in combination with p-hexasulfonic acid calix[6]arene (SCX6) as an effective particle stabilizer. The nanocomposites showed high activity against E. coli (Gram-negative) and S. aureus (Gram-positive) bacteria. The materials were characterized using a range of techniques including transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, UV-vis spectrophotometry, FT-IR, and X-ray powder diffraction (XRD). This rapid, single step synthetic approach not only provides a facile means of enabling and controlling graphene reduction (under alkaline conditions) but also offers an optimal route for homogeneously producing and depositing highly crystalline Ag nanostructures into reduced graphene oxide substrate.