Humic acid-mediated transport of a typical soil passivation remediation product (chloropyromorphite) in saturated porous media

Conversion of labile Pb species into chloropyromorphite (CPY) using phosphorus-bearing amendments was considered to be an ideal strategy in soil passivation remediation. However, the fate and transport of CPY in the soil are poorly understood. This study aims to fill the knowledge gap by evaluating the fate and transport of CPY under environmentally relevant conditions of humic acid (HA), pH, electrolyte concentration, and species through the saturated sandy medium. Results showed that bare CPY colloids are basically immobile in sandy porous media while the co-existence of HA made the transport of CPY improved by 30%-93.5%. Facilitated transport of CPY was attributed to the increased stability of CPY and the repulsive interaction between CPY particles and sands due to HA adsorption. The mobility of CPY was also increased with increasing pH from 5.0 to 9.0. When the pH was 9 with a 10 mmol/L NaCl background solution, the stronger energy barrier between CPY and sand led to enhanced transport behavior. The divalent Ca2+ had a more dramatic effect than monovalent Na+ on the aggregation and sedimentation of CPY colloids due to its effectivescreening of the surface charge of CPY and bridging interaction with CPY particles. Derjaguin-Landau-Verwey-Overbeek theory and attachment efficiency calculation indicated that high energy barriers were responsible for the high mobility of CPY colloids, while the retention of CPY in sands was mainly caused by secondary energy minimum and physically straining. The findings of this work can help to evaluate the fate of soil passivation remediation products in natural water and soil.

Linking the humification of organic amendments with size aggregate distribution: Insights into molecular composition using FT-ICR-MS

Soil organic matter (SOM) plays a pivotal role in enhancing physical and biological characteristics of soil. Humic substances constitute a substantial proportion of SOM and their increase can improve crop yields and promote agricultural sustainability. While previous research has primarily assessed the influence that humic acids (HAs) derived from natural water have on soil structure, our study focuses on the impact of HAs on soil aggregation under different fertilizer regimes. During the summer cropping season, maize was cultivated under organic and synthetic fertilizer treatments. The organic fertilizer treatment utilized barley (Hordeum vulgare L.) and hairy vetch (Vicia villosa R.) as an organic amendment five days prior to maize planting. The synthetic treatment included a synthetic fertilizer (NPK) applied at South Korea's recommended rates. The organic treatment resulted in significant improvements in the soil aggregates and stability (mean weight diameter, MWD; p < 0.05) compared to the synthetic fertilizer application. These improvements could be primarily attributed to the increased quantity and quality of HAs in the soil derived from the organic amendment. The amount of extracted HAs in the organic treatment was nearly twice that of the synthetic treatment. Additionally, the organic treatment had a 140 % larger MWD and a 40 % increase in total phenolic content compared to the synthetic treatment. The organic treatment also had an increased macronutrient uptake (p < 0.001), an 11 % increase in aboveground maize biomass, and a 21 % increase in grain yield relative to the synthetic treatment. Thus, the enhancement of HA properties through the incorporation of fresh organic manure can both directly and indirectly increase crop productivity.

Characteristics of DOM and bacterial community in rural black and odorous water bodies under different dimensions

Analysis of dissolved organic matter (DOM) composition and microbial characteristics is crucial for tracing the sources of rural black and odorous water bodies (BOWB). The aim of this study was to explore the DOM and microbial diversity and identify the primary environmental factors in BOWB from various pollution sources during different periods using EEMs-PARAFAC and Illumina sequencing. It was found that the physicochemical properties vary widely across different pollution types of BOWB, with higher overall content during the high-water period compared to the normal-water period. The types of dissolved organic matter in BOWB are Tyrosine proteins, Fulvic acid, Dissolved microbial metabolites, and Humic acid. During the normal-water period, DOM originates primarily from terrestrial sources in various water bodies. However, DOM affected by livestock and poultry waste and industrial effluents is influenced by both internal and external sources during periods of high water levels. In industrial waste-type BOWB, the biological sources of water are weak. Proteobacteria, Actinobacteria, Chloroflexi, Firmicutes were the dominant bacterial phyla. According to the redundancy analysis, pH (p = 0.047), Total nitrogen (TN) (p = 0.045), Organic carbon (OC) (p = 0.044), and Nickel (Ni) (p = 0.047) are the primary environmental factors influencing the composition of bacterial communities.

Characterizing the regional distribution, interaction with microorganisms, and sources of dissolved organic matter for summer rainfall: Insights from spectroscopy, community structure, and back-trajectory analyses

Dissolved organic matter (DOM) in rainfall participates in many biogeochemical cycles in aquatic environments and affects biological activities in water bodies. Revealing the characteristics of rainfall DOM could broaden our understanding of the carbon cycle. Therefore, the distribution characteristics and response mechanisms of DOM to microorganisms were investigated in different regions of Hebei. The results indicated that the water quality of the northern region was worse than that of the middle and southern regions. The two protein like components (C1, C2) and one humic like component (C3) were obtained; at high molecular weight (MW), the fluorescence intensity is high in the northern region (0.03 ± 0.02 R.U.), while at low MW, the fluorescence intensity is highest in the southern region (0.50 ± 0.18 R.U.). Furthermore, C2 is significantly positively correlated with C1 (P < 0.01), while C2 is significantly negatively correlated with C3 (P < 0.05) was observed. The spectral index results indicated that rainfall DOM exhibited low humification and highly autochthonous characteristics. The southern region obtained higher richness and diversity of microbial species than northern region (P < 0.05). The community exhibits significant spatiotemporal differences, and the Acinetobacter, Enterobacter, and Massilia, were dominant genus. Redundancy and network analyses showed that the effects of C1, C2, and nitrate on microorganisms increased with decreasing MW, while low MW exhibited a more complex network between DOM and microorganisms than high MW. Meanwhile, C1, C2 had a large total effect on β-diversity and function through structural equation modeling. The backward trajectory model indicates that the sources of air masses are from the northwest, local area, and sea in the northern, middle, and southern regions, respectively. This study broadened the understanding of the composition of summer rainfall DOM and its interactions with microorganisms during rainfall.

The effects of different electrode materials on the electric field-assisted co-composting system for the soil remediation of heavy metal pollution

The electric field-assisted composting system (EACS) is an emerging technology that can enhance composting efficiency, but little attention has been given to electrode materials. Herein, an EACS was established to investigate the effects of electrode materials on humic substance formation and heavy metal speciation. Excitation-emission matrix analysis showed that carbon-felt and stainless-steel electrodes increased humic acid (HA) by 48.57 % and 47.53 %, respectively. In the EACS with the carbon-felt electrode, the bioavailability factors (BF) of Cu and Cr decreased by 18.00 % and 7.61 %, respectively. Despite that the stainless-steel electrodes decreased the BF of As by 11.26 %, the leaching of Cr, Ni, Cu, and Fe from the electrode itself is an inevitable concern. Microbial community analyses indicated that the electric field increased the abundance of Actinobacteria and stimulated the multiplication of heavy metal-tolerant bacteria. Redundancy analysis indicates that OM, pH, and current significantly affect the evolution of heavy metal speciation in the EACS. This study first evaluated the metal leaching risk of stainless-steel electrode, and confirmed that carbon-felt electrode is environment-friendly material with high performance and low risk in future research with EACS.

Fulvic acid more facilitated the soil electron transfer than humic acid

Humus substances (HSs) participate in extracellular electron transfer (EET), which is unclear in heterogeneous soil. Here, a microbial electrochemical system (MES) was constructed to determine the effect of HSs, including humic acid, humin and fulvic acid, on soil electron transfer. The results showed that fulvic acid led to the optimal electron transfer efficiency in soil, as evidenced by the highest accumulated charges and removal of total petroleum hydrocarbons after 140 days, with increases of 161% and 30%, respectively, compared with those of the control. However, the performance of MES with the addition of humic acid and humin was comparable to that of the control. Fulvic acid amendment enhanced the carboxyl content and oxidative state of dissolved organic matter, endowing a better electron transfer capacity. Additionally, the presence of fulvic acid induced an increase in the abundance of electroactive bacteria and organic degraders, extracellular polymeric substances and functional enzymes such as cytochrome c and NADH synthesis, and the expression of m tr C gene, which is responsible for EET enhancement in soil. Overall, this study reveals the mechanism by which HSs stimulate soil electron transfer at the physicochemical and biological levels and provides basic support for the application of bioelectrochemical technology in soil.

Understanding microplastic aging driven by photosensitization of algal extracellular polymeric substances

The aging of microplastics (MPs) is extremely influenced by photochemically-produced reactive intermediates (PPRIs), which are mediated by natural photosensitive substances. Algal extracellular polymeric substances (EPS) can produce PPRIs when exposed to sunlight. Nonetheless, the specific role of EPS in the aging process of MPs remains unclear. This work systematically explored the aging process of polystyrene (PS) MPs in the EPS secreted by Chlorella vulgaris under simulated sunlight irradiation. The results revealed that the existence of EPS accelerated the degradation of PS MPs into particles with sizes less than 1 µm, while also facilitating the formation of hydroxy groups on the surface. The release rate of dissolved organic matter (DOM) from PS MPs was elevated from 0.120 mg·L-1·day-1 to 0.577 mg·L-1·day-1. The primary factor contributing to the elevated levels of DOM was humic acid-like compounds generated through the breakdown of PS. EPS accelerated the aging process of PS MPs by primarily mediating the formation of triplet excited states (3EPS*), singlet oxygen (1O2), and superoxide radicals (O2∙-), resulting in indirect degradation. 3EPS* was found to have the most substantial impact. This study makes a significant contribution to advance understanding of the environmental fate of MPs in aquatic environments impacted by algal blooms.

The positive effect of the enzyme inducer (MnSO4) on the formation of humic substance in rice straw composting by stimulating key microorganisms

This study investigated the impact of adding enzyme inducer (MnSO4) on humic substance (HS) formation during straw composting. The results demonstrated that both enzyme inducer treatment group (Mn) and functional microorganism treatment group (F) led to an increase in the content of HS compared to the treatment group without enzyme inducer and functional microorganism (CK). Interestingly, the enzyme inducer exhibited a higher promoting effect on HS (57.80 % ~ 58.58 %) than functional microbial (46.54 %). This was because enzyme inducer stimulated the growth of key microorganisms and changed the interaction relationship between microorganisms. The structural equation model suggested that the enzyme inducer promoted the utilization of amino acids by the fungus and facilitated the conversion of precursors to humic substance components. These findings provided a direction for improving the quality of composting products from agricultural straw waste. It also provided theoretical support for adding MnSO4 to compost.

Environmental condition-dependent effects of aquatic humic substances on the distribution of phenanthrene in microplastic-contaminated aquatic systems

Numerous studies have focused on the interaction between microplastics (MPs) and phenanthrene (PHE) in aquatic environments. However, the intricate roles of aquatic humic substances (HS), which vary with environmental conditions, in influencing PHE-MP interactions are not yet fully understood. This study investigates the variable and environmentally sensitive roles of HS in modifying the interactions between PHE and polyethylene (PE) MPs under laboratory-simulated aquatic conditions with varying solution chemistry, including pH, HS types, HS concentrations, and ionic strength. Our findings show that the presence of HS significantly reduces the adsorption of PHE onto both pristine and aged PE MPs, with a more pronounced reduction observed in aged PEs. This effect is highlighted by a notable decrease in the partitioning coefficient (Kd) of PHE, which falls from 2.60 × 104 to 1.30 × 104 L/kg on MPs in the presence of HS. The study also demonstrates that alterations in the net charge of HS solutions are crucial in modifying PHE distribution onto PEs. An initial decrease in Kd values at higher pH levels is reversed when HS is introduced. Furthermore, an increase in HS concentrations is associated with lower Kd values. In conditions of higher ionic strength, the retention of PHE by HS is intensified, likely due to an enhanced salting-out effect. This research highlights the significant role of aquatic HS in modulating the distribution of PHE in MP-polluted waters, which is highly influenced by various solution chemistry factors. The findings are vital for understanding the fate of PHE in MP-contaminated aquatic environments and can contribute to refining predictive models that consider diverse solution chemistry scenarios.

Mechanical energy triggered piezo-catalyzation of Bi2WO6 nanoplates on ferrate (Fe(VI)) oxidation in alkaline media: Performance and mechanism

Piezo-electricity, as a unique physical phenomenon, demonstrates high effectiveness in capturing the environmental mechanical energy into polarization charges, offering the possibility to activate the advanced oxidation processes via the electron pathway. However, information regarding the intensification of Fe(VI) through piezo-catalysis is limited. Therefore, our study is the first to apply Bi2WO6 nanoplates for piezo-catalyzation of Fe(VI) to enhance bisphenol A (BPA) degradation. Compared to Fe(VI) alone, the Fe(VI)/piezo/Bi2WO6 system exhibited excellent BPA removal ability, with the degradation rate increased by 32.6% at pH 9.0. Based on the experimental and theoretical results, Fe(VI), Fe(V), Fe(IV) and •OH were confirmed as reaction active species in the reaction, and the increased BPA removal mainly resulted from the enhanced formation of Fe(IV)/Fe(V) species. Additionally, effects of coexisting anions (e.g., Cl-, NO3-, SO42- and HCO3-), humic acid and different water matrixes (e.g., deionized water, tap water and lake water) on BPA degradation were studied. Results showed the Fe(VI)/piezo/Bi2WO6 system still maintained satisfactory BPA degradation efficiencies under these conditions, guaranteeing future practical applications in surface water treatment. Furthermore, the results of intermediates identification, ECOSAR calculation and cytotoxicity demonstrated that BPA degradation by Fe(VI)/piezo/Bi2WO6 posed a diminishing ecological risk. Overall, these findings provide a novel mechanical energy-driven piezo-catalytic approach for Fe(VI) activation, enabling highly efficient pollutant removal under alkaline condition.

Gaining insight into the effect of laccase expression on humic substance formation during lignocellulosic biomass composting

The aim is to enhance lignin humification by promoting laccase activities which can promote lignin depolymerization and reaggregation during composting. 1-Hydroxybenzotriazole (HBT) is employed to conduct laccase mediator system (LMS), application of oxidized graphene (GO) in combination to strengthen LMS. Compared with control, the addition of GO, HBT, and GH (GO coupled with HBT) significantly improved laccase expression and activities (P < 0.05), with lignin humification efficiency also increased by 68.6 %, 36.7 %, and 107.8 %. GH treatment induces microbial expression of laccase by increasing the abundance and synergy of core microbes. The unsupervised learning model, vector autoregressive model and Mantel test function were combined to elucidate the mechanism of action of exogenous materials. The results showed that GO stabilized the composting environment on the one hand, and acted as a support vector to stabilize the LMS and promote the function of laccase on the other. In GH treatment, degradation of macromolecules and humification of small molecules were promoted simultaneously by activating the dual function of laccase. Additionally, it also reveals the GH enhances the humification of lignocellulosic compost by converting phenolic pollutants into aggregates. These findings provide a new way to enhance the dual function of laccase and promote lignin humification during composting. It could effectively achieve the resource utilization of organic solid waste and reduce composting pollution.

Photo-induced leaching behaviors and biodegradability of dissolved organic matter from microplastics and terrestrial-sourced particles

Recent studies have increasingly focused on the occurrence of plastic leachate and its impacts on aquatic ecosystems. Nonetheless, the environmental fate of this leachate in the presence of abundant natural organic matter (NOM)-a typical scenario in environments contaminated with plastics-remains underexplored. This study investigates the photo-induced leaching behaviors of dissolved organic matter (DOM) from terrestrial-sourced particles (forest soil and leaf litter) and microplastics (MPs), specifically polystyrene (PS) and polyvinyl chloride (PVC), over a two-week period. We also examined the biodegradability and spectroscopic characteristics of the leached DOM from both sources. Our results reveal that DOM from microplastics (MP-DOM) demonstrates more persistent leaching behavior compared to terrestrial-derived DOM, even with lesser quantities per unit of organic carbon. UV irradiation was found to enhance DOM leaching across all particle types. However, the photo-induced leaching behaviors of fluorescent components varied with the particle type. The MP group exhibited a broader range and higher biodegradability (ranging from 19.7% to 61.6%) compared to the terrestrial-sourced particles (ranging from 3.7% to 16.5%). DOM leached under UV irradiation consistently showed higher biodegradability than that under dark conditions. Furthermore, several fluorescence characteristics of DOM, such as the protein/phenol-like component (%C2), terrestrial humic-like component (%C3), and humification index (HIX)-traditionally used to indicate the biodegradability of natural organic matter-were also effective in assessing MP-DOM (with correlation coefficients R2 = 0.6055 (p = 0.003), R2 = 0.5389 (p = 0.007), and R2 = 0.4640 (p = 0.015), respectively). This study provides new insights into the potential differences in environmental fate between MP-DOM and NOM in aquatic environments heavily contaminated with MPs.

Co-influence of biochar-supported effective microorganisms and seasonal changes on dissolved organic matter and microbial activity in eutrophic lake

DOM (dissolved organic matter) play a crucial role in lakes' geochemical and carbon cycles. Eutrophication evolution would influence nutrient status of waters and investigating the DOM variation helps a better understanding of bioremediation on environmental behavior of DOM in eutrophic lakes. In our study, the contents, compositions and characteristics of systematic DOM&SOM (sediment organic matter) were greatly influenced by seasonal changes. But the effective bioremediations obviously reduced the DOM concentration and thus mitigated the eutrophication outbreak risks in water bodies due to the increased MBC (microbial biomass carbon), microbial activity and metabolism. In early summer, the overall DOM in each treatment were readily low levels and derived from both autochthonous and exogenous origins, dominated by fulvic acid-like. In midsummer, the DOM contents and characteristics in each treatment increased significantly as phytoplankton activity improved, and the majority of DOM were humic acid-like and mainly of biological origin. The greatest differences of enzymes, MBC, microbial metabolism and DOM&SOM removal among different treatments were observed in summer months. In autumn, the systematic DOM&SOM slightly reduced due to the deceased microbial activity, in which the microbial humic acids were main component and derived from endogenous sources. Additionally, the gradually decreased SOM with cultivated time in each treatment was a result of microbiological conversion of SOM into DOM. For various treatments, BE, BE.A, BE.C and BE.E increased the MBC, enzymatic and microbial activities due to the application of biochar-supported EMs. Among these, BE and BE.A, especially BE.A with oxygen supplement, achieved the most desirable effect on reducing systematic DOM&SOM levels and increasing enzymatic and microbial activities. The group of EM also reduced the levels of DOM&SOM as improved degradation of EMs for DOM. However, BC, BE.C and BE.E finally did not achieved the desirable effect on reducing DOM&SOM due to the suppression of microbial activities, respectively, from high dose of biochar, weakening of dominant species and additional introduction of EMs in low liveness.

Leaching behaviors of dissolved organic matter from face masks revealed by fluorescence EEM combined with FRI and PARAFAC

Despite numerous studies investigating the occurrence and fate of microplastics, no effort has been devoted toward exploring the characteristics of dissolved organic matter (DOM) leached from face masks mainly made of plastics and additives used in large quantities during the COVID-19 pandemic. By using FTIR, UV-vis, fluorescence EEM coupling with FRI and PARAFAC, and kinetic models of leaching experiments, we explored the leaching behaviors of face mask-derived DOM (FM-DOM) from commonly used face masks including N95, KN95, medical surgical masks, etc. The concentration of FM-DOM increased quickly at early 0-48 h and reached equilibrium at about 48 h measured in terms of dissolved organic carbon and fluorescence intensity. The protein-like materials ranged from 80.32 % to 89.40 % of percentage fluorescence response (Pi,n) were dominant in four types of FM-DOM analyzed by fluorescence EEM-FRI during the leaching experiments from 1 to 360 h. Four fluorescent components were identified, which included tryptophan-like components, tyrosine-like components, microbial protein-like components, and fulvic-like components with fluorescence EEM-PARAFAC models. The multi-order kinetic model (Radj2 0.975-0.999) fitted better than the zero-order and first-order kinetic model (Radj2 0.936-0.982) for all PARAFAC components of FM-DOM based on equations derived by pseudo kinetic models. The leaching rate constants (kn) ranged from 0.058 to 30.938 and the half-life times (T1/2) ranged from 2.73 to 24.87 h for four FM-DOM samples, following the solubility order of fulvic-like components (C4) > microbial protein-like components (C3) > tryptophan-like components (C1) > tyrosine-like components (C2) for FM-DOM from four types of face masks during the leaching experiment from 0 to 360 h. These novel findings will contribute to the understanding of the underappreciated environment impact of face masks in aquatic ecosystems.

Effect of pyrolysis temperature and molecular weight on characterization of biochar derived dissolved organic matter from invasive plant and binding behavior with the selected pharmaceuticals

A comprehensive understanding of the characteristics of biochar released-dissolved organic matter (BDOM) derived from an invasive plant and its impact on the binding behavior of pharmaceuticals is essential for the application of biochar, yet has received less attention. In this study, the binding behavior of BDOM pyrolyzed at 300-700 °C with sulfathiazole, acetaminophen, chloramphenicol (CAP), and carbamazepine (CMZ) was investigated based on a multi-analytical approach. Generally, the pyrolysis temperature exhibited a more significant impact on the spectral properties of BDOM and pharmaceutical binding behavior than those of the molecular weight. With increased pyrolysis temperature, the dissolved organic carbon decreased while the proportion of the protein-like substance increased. The highest binding capacity towards the drugs was observed for the BDOM pyrolyzed at 500 °C with the molecular weight larger than 0.3 kDa. Moreover, the protein-like substance exhibited higher susceptive and released preferentially during the dialysis process and also showed more sensitivity and bound precedingly with the pharmaceuticals. The active binding points were the aliphatic C-OH, amide II N-H, carboxyl CO, and phenolic-OH on the tryptophan-like substance. Furthermore, the binding affinity of the BDOM pyrolyzed at 500 °C was relatively high with the stability constant (logKM) of 4.51 ± 0.52.

Biological and chemical characterization in relation to the yield of radish (Raphanus sativus L.) nourished with humus from plant residues

The increase in prices of fertilizers, energy and other materials necessary for the industry triggered a global economic crisis. Reason that was investigated on the biological and chemical characteristics in relation to the yield of radish nourished with humus from plant residue. The objective was to determine the appropriate dose of humus to obtain greater yield and its relationship with the chemical and biological characteristics of the radish. It is based on applied methodology with an experimental approach; Therefore, the Completely Random Block Design model was used, which consisted of 3 blocks and 5 treatments that were T1 with 0, T2 with 4, T3 with 6, T4 with 8 and T5 with 10 t/ha of humus and They applied 15 days after sowing. The physical characteristics of the radish were evaluated and processed using analysis of variance and Duncan. Concentration of elements in leaves and stomatal density were also analyzed. It was determined that T5 stood out in total plant length with 28.95 cm, plant weight with 76.87 g, equatorial diameter with 4,404 cm and commercial yield with 20,296 t/ha. Nitrogen consumption in relation to yield with 247.44 kg/ha. Stomatal density 459 stomata/mm2 and profitability with 150% and nutrient concentration in leaves highlighted T4 with N, K, Ca, Mg, Mo and Zn. It concludes that T5 stood out with 20,296 t/ha, which differed by 26.04% in relation to the control (T1) with 15,011 t/ha. Therefore, this dose added nutrients to the soil that improved the availability for plant absorption and this influenced the concentration of nutrients in leaves such as N, P and Fe and stomatal density with 459 stomata/mm2, which had a response in good development, strengthening against environmental stress and therefore greater performance.

Phage lysate can regulate the humification process of composting

Phages play a crucial role in orchestrating top-down control within microbial communities, influencing the dynamics of the composting process. Despite this, the impact of phage-induced thermophilic bacterial lysis on humification remains ambiguous. This study investigates the effects of phage lysate, derived explicitly from Geobacillus subterraneus, on simulated composting, employing ultrahigh-resolution mass spectrometry and 16S rRNA sequencing techniques. The results show the significant role of phage lysate in expediting humus formation over 40 days. Notably, the rapid transformation of protein-like precursors released from phage-induced lysis of the host bacterium resulted in a 14.8 % increase in the proportion of lignins/CRAM-like molecules. Furthermore, the phage lysate orchestrated a succession in bacterial communities, leading to the enrichment of core microbes, exemplified by the prevalence of Geobacillus. Through network analysis, it was revealed that these enriched microbes exhibit a capacity to convert protein and lignin into essential building blocks such as amino acids and phenols. Subsequently, these components were polymerized into humus, aligning with the phenol-protein theory. These findings enhance our understanding of the intricate microbial interactions during composting and provide a scientific foundation for developing engineering-ready composting humification regulation technologies.

Inhibiting effects of humic acid on iron flocculation hindered As removal by electro-flocculation on air cathode iron anode

Activated carbon air cathode combined with iron anode oxidation-flocculation synergistic Arsenic (As) removal was a new groundwater purification technology with low energy consumption and high efficiency for groundwater with high As concentration. The presence of organic matter such as humic acid (HA) had ambiguous effects on formation of organic colloids in the system. The effects of the particle size distribution characteristics of these colloids on the formation characteristics of flocs and the efficiency of As purification was not clear. In this work, we used five different pore size alumina filter membranes to separate mixed phase solutions and studied the corresponding changes in iron and arsenic concentrations in the presence and absence of humic acid conditions. In the presence of HA, the arsenic concentration of < 0.05 µm particle size components was 1.01, 1.28, 3.07, 7.69, 2.85 and 1.24 times of that in the absence of HA. At the same time, the arsenic content in 0.05-0.1 µm and 0.1-0.45 µm particle size components was also higher than that in the system without HA, which revealed that the presence of HA hindered the flocculation behavior of As distribution to higher particle sizes in the early stage of the reaction. The presence of HA affected the flocculation rate of iron flocs from small to large particle size fractions and it had limited effect on the behavior of large-size flocs in adsorption of As. These results provide a theoretical basis for targeted, rapid, and low consumption synergistic removal of arsenic and organic compounds in high arsenic groundwater.

Adsorption of humic acid from different organic solid waste compost to phenanthrene, is fluorescence excitation or quenching?

Humic acid (HA) from different organic solid waste (OSW) compost has been shown good adsorption properties for phenanthrene. However, the raw material of HA can affect its structure, resulting in differences in adsorption capacity. Therefore, this study focused on the adsorption characteristics of phenanthrene by HA from different OSW compost. In this work, chicken manure (CM), rice straw (RS) and lawn waste (LW) were selected as sources of composted HA. The adsorption mechanism of HA from different OSW compost were revealed through analytical techniques including three-dimensional fluorescence spectroscopy (EEM), two-dimensional correlation spectroscopy (2DCOS), and Fourier-transform infrared spectroscopy (FTIR). The results suggested that HA from LW compost had a better adsorption affinity for phenanthrene because of its more complex fluorescent component, where C1 as a simple component determined the adsorption process specifically. Furthermore, after HA from LW compost adsorbed phenanthrene, the increase in aromatic -COOH and -NH was the main reason for fluorescence quenching. These results indicated that HA from LW compost had better adsorption effect for phenanthrene. The results of this study were expected to provide a selection scheme for the control of phenanthrene pollution and environmental remediation.

Spectroscopic studies of the role of dissolved organic matter in acenaphthene photodegradation in liquid water and ice

The effect of concentration and origin of dissolved organic matter (DOM) on acenaphthene (Ace) photodegradation in liquid water and ice was investigated, and the components in DOM which were involved in Ace photodegradation were identified. The DOM samples included Suwannee River fulvic acid (SRFA), Elliott soil humic acid (ESHA), and an effluent organic matter (EfOM) sample. Due to the production of hydroxyl radical (•OH) and triplet excited-state DOM (3DOM*) which react with Ace, DOM had promotion effects on Ace photodegradation. However, the promotion effects of DOM were prevailed over by their suppressing effect of DOM including screening light effect, intermediates reducing effect and RS quenching effect, and thus, the photodegradation rates of Ace decreased in the presence of the three DOM with concentrations of 0.5-7.5 mg C/L in liquid water and ice. ESHA had higher light absorption and thus had higher screening light effect on Ace photodegradation in liquid water than SRFA and EfOM. At each DOM concentration, ESHA exhibited higher promotion effect on Ace photodegradation than SRFA and EfOM, in liquid water and ice. The binding of Ace with DOM was indicated by decreases in fluorescence intensity of Ace when coexisted with DOM. However, the binding of Ace to DOM played an unimportant role in suppressing Ace photodegradation. The photodegradation behavior of fluorophores in Ace with DOM present in ice was not similar to that in liquid water. C-O, C═O, carboxyl groups O-H and aliphatic C-H functional groups in DOM were involved in the interaction of DOM with Ace. The presence of Ace seemed to have no influence on the photodegradation behavior of functional groups in DOM.

Spectral characterization of the impact of modifiers and different prepare temperatures on snow lotus medicinal residue-biochar and dissolved organic matter

This study involved the production of 20 biochar samples derived from secondary medicinal residues of Snow Lotus Oral Liquid, processed within the temperature range of 200-600 °C. Additionally, four medicinal residues, including dissolved organic matter (DOM), from 24 samples obtained using the shaking method, served as the primary source material. The investigation focused on two key factors: the modifier and preparation temperature. These factors were examined to elucidate the spectral characteristics and chemical properties of the pharmaceutical residues, biochar, and DOM. To analyze the alterations in the spectral attributes of biochar and medicinal residues, we employed near-infrared spectroscopy (NIR) in conjunction with Fourier-infrared one-dimensional and two-dimensional correlation spectroscopy. These findings revealed that modifiers enhanced the aromaticity of biochar, and the influence of preparation temperature on biochar was diminished. This observation indicates the stability of the aromatic functional group structure. Comparative analysis indicated that Na2CO3 had a more pronounced structural effect on biochar, which is consistent with its adsorption properties. Furthermore, we utilized the fluorescence indices from UV-visible spectroscopy and excitation-emission-matrix spectra with the PARAFAC model to elucidate the characteristics of the fluorescence components in the DOM released from the samples. The results demonstrated that the DOM released from biochar primarily originated externally. Aromaticity reduction and increased decay will enhance the ability of the biochar to bind pollutants. Those results confirmed the link between the substantial increase in the adsorption performance of the high-temperature modified charcoal in the previous study and the structural changes in the biochar. We investigated the structural changes of biochar and derivative DOM in the presence of two perturbing factors, modifier and preparation temperature. Suitable modifiers were selected. Preparation for the study of adsorption properties of snow lotus medicinal residues.

Antioxidant capacity sources of soils under different land uses

Antioxidants (AOX) in soils originate mainly from secondary plant metabolites and are pivotal in many redox processes in environment, maintaining soil quality. Still, little is known about the influence of land uses on their accumulation in soil. The aim of the paper was to determine the content of these redox-active compounds in the extracts of A horizons of abandoned fallows, arable and woodland soils. Total antioxidant capacity (TAC) of soils under various uses and vegetation was evaluated in different soil extracts using Folin-Ciocâlteu method. The contribution of humic acids to TAC was determined and antioxidant profiles estimated using the chromatographic GC-MS method. Forest soils exhibited the highest TAC (15.5 mg g-1) and AOX contents (4.34 mg g-1), which were positively correlated with soil organic carbon content. It was estimated that humic acids contribute to over 50% of TAC in soils. The main phenolics in woodland A horizons were isovanillic and p-hydroxybenzoic acid (p-HA), while esculetin and p-HA predominated in the abandoned fallows due to the prevalence of herbaceous vegetation. Cultivated soils were the most abundant in p-HA (56.42%). In the studied topsoils, there were considerable amounts of aliphatic organic matter, which role in redox processes should be further evaluated.

Photochemical behaviors of sludge extracellular polymeric substances from bio-treated effluents towards antibiotic degradation: Distinguish the main photosensitive active component and its environmental implication

Activated sludge extracellular polymeric substances (ASEPSs) comprise most dissolved organic matters (DOMs) in the tail water. However, the understanding of the link between the photolysis of antibiotic and the photo-reactivity/photo-persistence of ASEPS components is limited. This study first investigated the photochemical behaviors of ASEPS's components (humic acids (HA), hydrophobic substances (HOS) and hydrophilic substances (HIS)) separated from municipal sludge's EPS (M-EPS) and nitrification sludge's EPS (N-EPS) in the photolysis of sulfadiazine (SDZ). The results showed that 60% of SDZ was removed by the M-EPS, but the effect in the separated components was weakened, and only 24% - 39% was degraded. However, 58% of SDZ was cleaned by HOS in N-EPS, which was 23% higher than full N-EPS. M-EPS components had lower steady-state concentrations of triplet intermediates (3EPS*), hydroxyl radicals (·OH) and singlet oxygen (1O2) than M-EPS, but N-EPS components had the highest concentrations (5.96 ×10-15, 8.44 ×10-18, 4.56 ×10-13 M, respectively). The changes of CO, C-O and O-CO groups in HA and HOS potentially correspond to reactive specie's generation. These groups change little in HIS, which may make it have radiation resistance. HCO-3 and NO-3 decreased the indirect photolysis of SDZ, and its by-product N-(2-Pyrimidinyl)1,4-benzenediamine presents high environmental risk.

Identifying the Stripping of Oxide Debris from Graphene Oxide: Evidence from Experimental Analysis and Molecular Simulation

In this study, characteristics of oxidation debris (OD) and its stripping mechanism from graphene oxide (GO) were explored. The results demonstrated that OD contains three components, namely, protein-, fulvic acid-, and humic acid-like substances; among these, protein-like substances with lower molecular weight and higher hydrophilicity were most liable to be stripped from GO and were the primary components stripped from GO at pH < 10, whereas humic acid- and fulvic acid-like substances were stripped from GO at pH > 10. During the stripping of OD, hydrogen bonds from carboxyl and carbonyl were the first to break, followed by hydrogen bonds from epoxy. Subsequently, π-π interactions were broken, and hydrogen bond interactions induced by hydroxyl groups were the hardest to break. After the stripping of OD, the recombination of OD on GO was observed, and regions containing relatively fewer oxygen-containing functional groups were favorable binding sites for the readsorbed OD. The stripping and recombination of OD on GO resulted in an uneven GO surface, which should be considered during the development of GO-based environmental materials and the evaluation of their environmental behavior.

Kitchen compost-derived humic acid application promotes ryegrass growth and enhances the accumulation of Cd: An analysis of the soil microenvironment and rhizosphere functional microbes

Phytoremediation is an environmentally friendly and safe approach for remediating environments contaminated with heavy metals. Humic acid (HA) has high biological activity and can effectively complex with heavy metals. However, whether HA affects available Cd storage and the Cd accumulation ability of plants by altering the soil microenvironment and the distribution of special functional microorganisms remains unclear. Here, we investigated the effects of applying kitchen compost-derived HA on the growth and Cd enrichment capacity of ryegrass (Lolium perenne L.). Additionally, the key role of HA in regulating the structure of rhizosphere soil bacterial communities was identified. HA promoted the growth of perennial ryegrass and biomass accumulation and enhanced the Cd enrichment capacity of ryegrass. The positive effect of HA on the soil microenvironment and rhizosphere bacterial community was the main factor promoting the growth of ryegrass, and this was confirmed by the significant positive correlation between the ryegrass growth index and the content of SOM, AP, AK, and AN, as well as the abundance of rhizosphere growth-promoting bacteria such as Pseudomonas, Steroidobacter, Phenylobacterium, and Caulobacter. HA passivated Cd and inhibited the translocation capacity of ryegrass. The auxiliary effect of resistant bacteria on plants drove the absorption of Cd by ryegrass. In addition, HA enhanced the remediation of Cd-contaminated soil by ryegrass under different Cd levels, which indicated that kitchen compost-derived HA could be widely used for the phytoremediation of Cd-contaminated soil. Generally, our findings will aid the development of improved approaches for the use of kitchen compost-derived HA for the remediation of Cd-contaminated soil.

The promotion of the atrazine degradation mechanism by humic acid in a soil microbial electrochemical system

The enhancing effects of anodes on the degradation of the organochlorine pesticide atrazine (ATR) in soil within microbial electrochemical systems (MES) have been extensively researched. However, the impact and underlying mechanisms of soil microbial electrochemical systems (MES) on ATR degradation, particularly under conditions involving the addition of humic acids (HAs), remain elusive. In this investigation, a soil MES supplemented with humic acids (HAs) was established to assess the promotional effects and mechanisms of HAs on ATR degradation, utilizing EEM-PARAFAC and SEM analyses. Results revealed that the maximum power density of the MES in soil increased by 150%, and the degradation efficiency of ATR improved by over 50% following the addition of HAs. Furthermore, HAs were found to facilitate efficient ATR degradation in the far-anode region by mediating extracellular electron transfer. The components identified as critical in promoting ATR degradation were Like-Protein and Like-Humic acid substances. Analysis of the microbial community structure indicated that the addition of HAs favored the evolution of the soil MES microbial community and the enrichment of electroactive microorganisms. In the ATR degradation process, the swift accumulation of Hydrocarbyl ATR (HYA) was identified as the primary cause for the rapid degradation of ATR in electron-rich conditions. Essentially, HA facilitates the reduction of ATR to HYA through mediated bonded electron transfer, thereby markedly enhancing the efficiency of ATR degradation.

Detection of nanoplastics released from consumer plastic food containers by electromagnetic heating pyrolysis mass spectrometry

Nanoplastics released from consumer plastic food containers are emerging environmental pollutants and directly ingested as part of the diet. However, quantification methods for nanoplastics are still lacking. Herein, a rapid identification and mass quantification approach was developed for nanoplastics analysis by combining electromagnetic heating with pyrolysis mass spectrometry (Eh-Py-MS). The pyrolysis products directly entered into the MS, which omits the gas phase separation process and shortens the detection time. A compact pyrolysis chamber was used and this increased the sample transfer efficiency and lowered power requirement. The operational parameters were systematically examined. The influence of nanoplastic size, additive, humic acid, and aging on detection was investigated, and it was concluded that environmental factors (humic acid, aging) and plastic properties (size, additives) did not influence the detection. The developed chamber showed that the limit of detection of polystyrene (PS) nanoplastics was 15.72 ng. Several typical food packages were demonstrated with satisfactory recovery rates (87.5-110%) and precision (RSD ≤11.36%). These results suggested that the consumer plastic food containers are a significant source of direct exposure to nanoplastics in humans from the environment.

Using CuMgFe layered double oxide to replace laccase as a catalyst for abiotic humification

Humification offers a promising avenue for sequestering dissolved organic carbon while facilitating environmental cleanup. In this study, CuMgFe layered double oxides (LDO) were applied as a catalyst to replace conventional enzymes, such as laccase, thereby enhancing the in vitro polyphenol-Maillard humification reaction. CuMgFe LDO was synthesized through calcination of CuMgFe layered double hydroxides (LDH) at 500 °C for 5 h. A suite of characterization methods confirmed the successful formation into mixed oxides (Cu2O, CuO, MgO, FeO, and Fe2O3) after thermal treatment. A rapid humification reaction was observed with CuMgFe LDO, occurring within a two-week span, likely due to a distinct synergy between copper and iron elements. Subsequent analyses identified that MgO in CuMgFe LDO also played a pivotal role in humification by stabilizing the pH of the reaction. In the absence of magnesium, LDO's humification activity was more pronounced in the early stages of the reaction, but it rapidly diminished as the reaction progressed. The efficiency of CuMgFe LDO was heightened at elevated temperatures (35 °C), while light conditions manifested a discernible effect, with a modest decrease in humification efficacy under indoor light exposure. CuMgFe LDO surpassed both laccase and MgFe LDH in performance, boasting a superior humification efficiency relative to its precursor, CuMgFe LDH. The catalysts' humification activity was modulated by their crystallinity and valence dynamics. Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) results suggested that introducing the amino acid, glycine, expedited the CuMgFe LDO-fueled humification, enhancing the formation of C-N and C-C bonds in the resultant products. The humic-like substances derived from the catalyst-enhanced reaction displayed an elevated presence of aromatic configurations and a richer array of oxygen functional groups in comparison to a typical commercial humic material.

Contrasting fate and binding behavior of Mn and Cu with dissolved organic matter during in situ remediation using multicomponent capping in malodorous black water

The common use of peroxides in the remediation of malodorous black water may lead to the activation of heavy metals in sediment when eliminating black and odorous substances. The mechanisms of heavy metal interactions with dissolved organic matter (DOM) in response to in situ capping have not been elucidated, but this information could guide the optimization of capping materials. We developed a capping material consisting of hydrothermally carbonized sediment (HCS), hydrated magnesium carbonate (HMC) and sodium percarbonate (SPC) and used microcosm experiments to investigate the dynamics of Mn and Cu at the sediment-water interface in malodorous black water. The results showed that HCS, HMC and SPC contributed multiple functions of mechanical protection, chemical isolation and oxygen provision to the new caps. HMC promoted the conversion of Mn/Cu into carbonate minerals. The optimal mass proportions were 25 % HCS, 60 % HMC and 15 % SPC based on the mixture design. In situ capping altered the fate and transformation of metals in the sediment-overlying water profile in the short term through Mn immobilization and Cu activation. The complexation of Cu(II) ions was significantly stronger than that of Mn(II) ions. In situ capping had a significant effect on the order of complexation of different fluorescent DOM molecules with Mn(II)/Cu(II) ions: microbial byproducts and fulvic acid-like components were preferentially complexed with Cu(II) ions after capping, while phenolic and humic acid-like components preferentially interacted with Mn(II) ions. Humic-like components bound to Cu were affected the most by capping treatment, whereas protein-like components were relatively weakly affected. Our study provides valuable knowledge on the impact of in situ capping on DOM-metal complexes.

Effect of pyrolysis temperature on the binding characteristics of DOM derived from livestock manure biochar with Cu(II)

Biochar-derived dissolved organic matter (BDOM) has the potential to influence the environmental application of biochar and the behavior of heavy metals. In this study, the binding properties of BDOM derived from livestock manure biochar at different pyrolysis temperatures with Cu(II) were investigated based on a multi-analytical approach. The results showed that the DOC concentration, aromatics, and humification degree of BDOM were higher in the process of low pyrolysis of biochar. The pyrolysis temperature changed the composition of BDOM functional groups, which affected the binding mechanism of BDOM-Cu(II). Briefly, humic-like and protein-like substances dominated BDOM-Cu(II) binding at low and high pyrolysis temperatures, respectively. The higher binding capacity for Cu(II) was exhibited by BDOM derived from the lower pyrolysis temperature, due to the carboxyl as the main binding site in humic acid had high content and binding ability at low-temperature. The amide in proteins only participated in the BDOM-Cu(II) binding at high pyrolysis temperature, and polysaccharides also played an important role in the binding process. Moreover, the biochar underwent the secondary reaction at certain high temperatures, which led to condensation reaction of the aromatic structure and the conversion of large molecules into small molecules, affecting the BDOM-Cu(II) binding sites.

Effect of Maillard reaction based on catechol polymerization on the conversion of food waste to humus

The pollution and harm of food waste (FW) are increasingly concerned, which has the dual attributes of pollutants and resources. This study aimed to improve the synthesis efficiency of FW humic substances (HS), and investigating the effect of catechol on the formation mechanism and structure of humic acid (HA) and fulvic acid (FA). Results indicated that catechol incorporation could enable to exhibit higher HS yield and more complex structure, especially the maximum particle size of FA reached 4800 nm. This was due to the combination of catechol with multiple nitrogenous compounds, which accelerated molecular condensation. Spectroscopic scans analysis revealed that Maillard reaction occurs first. Subsequently, Maillard reaction products and amino acids were combined with different sites of catechol, which leads to the difference of molecular structure of HS. The structure of FA is characterized by an abundance of carboxyl and hydroxyl groups, whereas HA is rich in benzene and heterocyclic structures. The structural difference was responsible for the disparity in the functional properties of FA and HA. Specifically, the presence of amino, hydroxyl, pyridine, and carboxyl groups in FA contributes significantly to its chelating activity. This research provides an efficient and sustainable unique solution for the high-value of FW conversion, and provides evidence for understanding the structural evolution of HA and FA.

The biotic effects of lignite on humic acid components conversion during chicken manure composting

Targeted regulation of composting to convert organic matter into humic acid (HA) holds significant importance in compost quality. Owing to its low carbon content, chicken manure compost often requires carbon supplements to promote the humification progress. The addition of lignite can increase HA content through biotic pathways, however, its structure was not explored. The Parallel factor analysis revealed that lignite can significantly increase the complexity of highly humified components. The lignite addition improved phenol oxidase activity, particularly laccase, during the thermophilic and cooling phases. The abundance and transformation functions of core bacteria also indicated that lignite addition can influence the activity of microbial transformation of HA components. The structural equation model further confirmed that lignite addition had a direct and indirect impact on enhancing the complexity of HA components through core bacteria and phenol oxidase. Therefore, lignite addition can improve HA structure complexity during composting through biotic pathways.

Influences of dissolved organic matters on the adsorption and bioavailability of sulfadiazine: Molecular weight- and type-dependent heterogeneities

The bioavailability of contaminants in aquatic environments was highly related with the existing forms (soluble or adsorbed) and properties of dissolved organic matters (DOMs). In this study, the molecular weight (MWs)-dependent effects of DOMs on the adsorption and bioavailability of sulfadiazine were explored. Colloid ZnO and Al2O3 were employed as the representative colloidal particles, and algae-derived organic matter (AOM) and humic acid (HA) were selected as typical autochthonous and allochthonous DOMs. The ultrafiltration procedure was applied to divide the bulk DOMs into high MW (HMW-, 1 kDã0.45 μm) and low MW (LMW-, <1 kDa) fractions. Results showed that HMW-DOM contained more aromatic and protein-like substances as compared to the LMW counterparts. In addition, presence of AOM promoted sulfadiazine adsorption capabilities by 1.19-4.54 folds and mitigated the inhibition ratio by 0.56-0.78 folds, whereas those of HA inhibited sulfadiazine adsorption by 0.27-0.84 folds and enhanced the biotoxicity by 1.21-1.45 folds. Regardless of different DOM types, HMW-fraction exhibited highest effects on sulfadiazine adsorption and bioavailability, followed by the bulk- and LMW-fractions. Two-dimensional correlation spectroscopy showed that sulfadiazine was adsorbed on colloidal surfaces prior to AOM, and the subsequent adsorption of AOM can provide additional sites for sulfadiazine adsorption, which decreased the concentrations of aqueous sulfadiazine as well as the biotoxicity to Microcystis aeruginosa (M. aeruginosa). The HA, however, was preferentially adsorbed on colloidal surfaces, which hindered the subsequent sulfadiazine adsorption and resulted in a high sulfadiazine abundance in aqueous solution as well as the enhanced biotoxicity to M. aeruginosa. This study highlighted the importance of the types and MWs of DOMs in influencing the behaviors and ecological effects of aquatic contaminants.

Depth-dependent variations of physicochemical properties of sedimentary dissolved organic matter and the influence on the elimination of typical pharmaceuticals

Sedimentary dissolved organic matter (DOM) could exert a significant influence on the transformation of trace organic contaminants. However, the variations of sedimentary DOM properties with depth and their impact on trace organic contaminants biodegradation remain unclear. In this study, the qualitative changes in DOM properties with depth were assessed using spectral techniques. Specifically, within the sediment range of 0-30 cm, humic acid and fulvic acid fractions exhibited higher degrees of humification and aromatization at 10-20 cm, while hydrophilic fractions showed higher degrees of humification and aromatization at 20-30 cm. Furthermore, electrochemical methods were employed to quantitatively assess the electron transfer capacity of sedimentary DOM at different depths, which displayed consistent variation trend with humification and aromatization degree. The high degree of humification and aromatization, along with strong electron-accepting capability of DOM, significantly enhanced the biodegradation rates of tetracycline and ritonavir. To gain deeper insights into the influence of molecular composition of DOM on its properties, two-dimensional gas chromatography-quadrupole mass spectrometry analysis revealed that quinones and phenolic hydroxyl compounds govern the redox reactivity of DOM. Simulated experiment of DOM-mediated biodegradation of typical pharmaceuticals confirmed the role of quinones and phenolic hydroxyl groups in the redox reactivity of DOM.

Applications of humic and fulvic acid under saline soil conditions to improve growth and yield in barley

BACKGROUND

Enriching the soil with organic matter such as humic and fulvic acid to increase its content available nutrients, improves the chemical properties of the soil and increases plant growth as well as grain yield. In this study, we conducted a field experiment using humic acid (HA), fulvic acid (FA) and recommended dose (RDP) of phosphorus fertilizer to treat Hordeum vulgare seedling, in which four concentrations from HA, FA and RDP (0.0 %, 50 %, 75 % and 100%) under saline soil conditions . Moreover, some agronomic traits (e.g. grain yield, straw yield, spikes weight, plant height, spike length and spike weight) in barley seedling after treated with different concentrations from HA, FA and RDP were determined. As such the beneficial effects of these combinations to improve plant growth, N, P, and K uptake, grain yield, and its components under salinity stress were assessed.

RESULTS

The findings showed that the treatments HA + 100% RDP (T1), HA + 75% RDP (T2), FA + 100% RDP (T5), HA + 50% RDP (T3), and FA + 75% RDP (T6), improved number of spikes/plant, 1000-grain weight, grain yield/ha, harvest index, the amount of uptake of nitrogen (N), phosphorous (P) and potassium (K) in straw and grain. The increase for grain yield over the control was 64.69, 56.77, 49.83, 49.17, and 44.22% in the first season, and 64.08, 56.63, 49.19, 48.87, and 43.69% in the second season,. Meanwhile, the increase for grain yield when compared to the recommended dose was 22.30, 16.42, 11.27, 10.78, and 7.11% in the first season, and 22.17, 16.63, 11.08, 10.84, and 6.99% in the second season. Therefore, under salinity conditions the best results were obtained when, in addition to phosphate fertilizer, the soil was treated with humic acid or foliar application the plants with fulvic acid under one of the following treatments: HA + 100% RDP (T1), HA + 75% RDP (T2), FA + 100% RDP (T5), HA + 50% RDP (T3), and FA + 75% RDP (T6).

CONCLUSIONS

The result of the use of organic amendments was an increase in the tolerance of barley plant to salinity stress, which was evident from the improvement in the different traits that occurred after the treatment using treatments that included organic amendments (humic acid or fulvic acid).

Insights into priming effects of dissolved organic matter degradation in urban lakes with different trophic states

Priming effect (PE) is recognized as an important potential mechanism for dissolved organic matter (DOM) degradation in aquatic ecosystems. However, the priming effects (PEs) of various priming substances on the degradation of DOM pools in urban lakes along diverse trophic states remain unknown. To address this knowledge gap, the PEs and drivers of glucose and plant leachate of lake water with three trophic states were investigated. We reveal differences in the bioavailability of DOM in lake water, glucose, and plant leachate. The PE of the same priming substance was significantly higher in highly-eutrophic lake water than in mesotrophic lake. The priming intensity induced by glucose was significantly higher when compared to plant leachate. Regarding the addition of glucose, humic-like components (C1 and C3) showed slight PE, while the tyrosine-like component C2 showed negative PE. However, the positive PEs were observed on three components after adding plant leachate. The driver of PE by glucose shifted from nutrients to DOM components with increasing trophic levels. The PEs induced by plant leachate were affected by nutrients, chlorophyll-a (Chl-a), water chemistry, and DOM components in lightly/moderately-eutrophic lake water. This study revealed the intensities, directions, and drivers of PEs, providing essential insights into uncovering the DOM biogeochemical process in urban lakes.

Root exudates enhanced 6:2 FTOH defluorination, altered metabolite profiles and shifted soil microbiome dynamics

6:2 Fluorotelomer alcohol (FTOH), one of per- and polyfluoroalkyl substances (PFAS), is widely used as a raw material in synthesizing surfactants and fluorinated polymers. However, little is known about the role of root exudates on 6:2 FTOH biodegradation in the rhizosphere. This study examined the effects of root exudates produced from dicot (Arabidopsis thaliana) and monocot (Brachypodium distachyon) grown under different nutrient conditions (nutrient-rich, sulfur-free, and potassium-free) on 6:2 FTOH biotransformation with or without bioaugmentating agent Rhodococcus jostii RHA1. All the exudates enhanced defluorination of 6:2 FTOH by glucose-grown RHA1. Amendment of dicot or monocot root exudates, regardless of the plant growth conditions, also enhanced 6:2 FTOH biotransformation in soil microcosms. Interestingly, high levels of humic-like substances in the root exudates are linked to high extents of 6:2 FTOH defluorination. Bioaugmenting strain RHA1 along with root exudates facilitated 6:2 FTOH transformation with a production of more diverse metabolites. Microbial community analysis revealed that Rhodococcus was predominant in all strain RHA1 spiked treatments. Different root exudates changed the soil microbiome dynamics. This study provided new insight into 6:2 FTOH biotransformation with different root exudates, suggesting that root exudates amendment and bioaugmentation are promising approaches to promote rhizoremediation for PFAS-contaminated soil.

Simultaneous removal of NOM and sulfate in a bioelectrochemical integrated biofilter treating reclaimed water

Biofiltration is an environmentally 'green' technology that is compatible with the recently proposed sustainable development goals, and which has an increasingly important future in the field of water treatment. Here, we explored the impacts of bioelectrochemical integration on a bench-scale slow rate biofiltration system regarding its performance in reclaimed water treatment. Results showed that the short-term (<3 months) integration improved the removal of natural organic matter (NOM) (approximately 8.8%). After long-term (5 months and thereafter) integration, the cathodic charge transfer resistance was found to have a significant reduction from 2662 to 1350 Ω. Meanwhile, bioelectrochemical autotrophic sulfate (SO42-) reduction (over 27.6% reduction) through the syntrophic metabolism between hydrogen oxidation strains (genus Hydrogenophaga) and sulfate-reducing microbes (genera Dethiobacter, Desulfovibrio, and Desulfomicrobium) at the cathodic region was observed. More significantly, the microbial-derived chromophoric humic substances were found to act as electron shuttles at the cathodic region, which might facilitate the process of bioelectrochemical SO42- reduction. Overall, this study provided valuable insights into the potential application of bioelectrochemical-integrated biofilter for simultaneous reduction of NOM and SO42- treating reclaimed water.

Inhibitory effect of microplastics derived organic matters on humification reaction of organics in sewage sludge under alkali-hydrothermal treatment

Alkali-hydrothermal treatment (AHT) of sewage sludge is often used to recover value-added dissolved organic matters (DOM) enriched with artificial humic acids (HA). Microplastics (MPs), as emerging contaminants in sewage sludge, can leach organic compounds (MP-DOM) during AHT, which potentially impact the characteristics of thermally treated sludge's DOM. This study employed spectroscopy and Fourier transform-ion cyclotron resonance mass spectrometry (FT-ICR-MS) to explore the impacts of MPs on DOM composition and transformation during AHT. The biological effects of DOM were also investigated by hydroponic experiments. The results showed that the leaching of MP-DOM led to a substantial increase in DOC content of DOM of thermally treated sludge. Conversely, the HA content significantly decreased in the presence of MPs, resulting in a decline of plant growth facilitation degree. FT-ICR-MS analysis revealed that the reduction in HA content was characterized by a notable decline in the abundance of O6-7 and N1-3O6-7 molecules. Reactomics results indicated that the leaching of MP-DOM inhibited the Maillard reaction but bolstered oxidation reactions. The inhibition of Maillard reaction, resulting in a decrease in crucial precursors (dicarbonyl compounds, ketoses, and deoxyglucosone), was responsible for the decrease of HA content. The primary mechanism responsible for inhibiting the Maillard reaction was the consumption of reactive amino reactants through two pathways. Firstly, the leaching of organic acids in MP-DOM caused decrease of sludge pH, leading to the protonation of amino groups. Secondly, the lipid-like compounds in MP-DOM underwent oxidation (-2H+O), producing fatty aldehydes that consumed the reactive amino reactants. These discoveries offer enhanced insights into the specific contribution of MPs to the composition, transformation, bioactivity of DOM during AHT process.

Composition characteristics and metal binding behavior of macrophyte-derived DOM (MDOM) under microbial combined photodegradation: A state closer to actual macrophytic lakes

In actual lakes, the "unstable components" of macrophyte-derived DOM (MDOM) are always degraded and cannot exist abidingly, but the environmental impact brought by it is ignored. In this study, MDOM from Potamogeton crispus was extracted to carry out microbial combined photodegradation (M-Photodegradation) and fluorescence titration experiments. Then the traits and metal binding reaction of MDOM under M-Photodegradation were analysed and compared with the features of lake-derived DOM (LDOM) from point monitoring of Dongping Lake through EEM-PARAFAC, 2D-SF-COS, and 2D-FTIR-COS. The results showed that the features of MDOM after M-Photodegradation were closer to those of LDOM. The degradation amplitudes were 93.53% ± 0.53% for C4 in microbial degradation and 78.31% ± 0.74% for C3 in photodegradation. Correspondingly, both were hardly detected in LDOM. Protein-like substances and aliphatic C-OH were preferentially selected by Cu2+, while humic-like matter and phenolic hydroxyl O-H responded faster to Pb2+. Although the binding sequences remained unchanged after M-Photodegradation, the LogKCu and LogKPb of components decreased overall, indicating increased environmental risks. This study proves that the refractory MDOM retained after degradation was more consistent with the actual state of macrophytic lakes and provides more information for the treatment of heavy metal pollution in lakes.

Dissolved organic matter promoted hydroxyl radical formation and phenanthrene attenuation during oxygenation of iron-pillared montmorillonites

The oxygenation of Fe(II)-bearing minerals for hydroxyl radicals (HO•) formation and contaminant attenuation receives increasing attentions. However, information on dissolved organic matter (DOM) with different types, concentrations, and molecular weights (MWs) in manipulating HO• formation and contaminant attenuation during mineral oxygenation remain unclear. In this study, four iron-pillared montmorillonites (IPMs) and two DOM samples [e.g., humic acids (HA) and fulvic acids (FA)] were prepared to explore the HO• formation and phenanthrene attenuation during the oxygenation of IPMs in the presence or absence of DOMs. Results showed that iron-pillared and high-temperature calcination procedures extended the interlayer domain of IPMs, which provided favorable conditions for a high HO• production from 1293 to 14537 μmol kg-1. The surface-absorbed/low crystalline Fe(Ⅱ) was the predominant Fe(Ⅱ) fractionations for HO• production, and presence of DOMs significantly enhanced the HO• production and phenanthrene attenuation. Moreover, regardless of the types and concentrations, the low MW (LMW, <1 kDa) fraction within DOM pool contributed highest to HO• production and phenanthrene attenuation, followed by the bulk and high MW (HMW-, 1 kDa∼0.45 μm) fractions, and FA exhibited more efficient effects in promoting HO• production and phenanthrene attenuation than HA. The fluorescent spectral analysis further revealed that phenolic-like fluorophores in LMW-fraction were the main substances responsible for the enhanced HO• production and phenanthrene attenuation. The results deepen our understandings toward the behaviors and fate of aquatic HO• and contaminants, and also provide technical guidance for the remediation of contaminated environments.

Investigation on humic substance and tetracycline interaction mechanism: biophysical and theoretical studies and assessing their effect on biological activity

Tetracycline (TC) is a widely used antibiotic, and evaluating its interaction with humic substances (HS) that act as a complexing agent in the environment is essential to understanding the availability of this contaminant in the environment. This study evaluated the interaction between HS and TC using different spectroscopic techniques, theoretical studies, and biological assays simulating environmental conditions. TC interacts with HS, preferably by electrostatic forces, with a binding constant of 9.2 × 103 M-1 (30 °C). This process induces conformational changes in the superstructure, preferably in the HS, like protein fraction. Besides, studies using the 8-anilino-1-naphthalene sulfonate (ANS) probe indicated that the antibiotic alters the hydrophobicity degree on HS's surface. Synchronized fluorescence shows that the TC interaction occurs preferentially with the protein-like fraction of soil organic matter (KSV = 26.28 ± 1.03 M-1). The TC epitope was evaluated by 1H NMR and varied according to the pH (4.8 and 9.0) of the medium, as well as the main forces responsible for the stabilization of the HS-TC complex. The molecular docking studies showed that the formation of the HS-TC complex is carried out spontaneously (ΔG = -7.1 kcal mol-1) and is stabilized by hydrogen bonds and electrostatic interactions, as observed in the experimental spectroscopic results. Finally, biological assays indicated that HS influenced the antimicrobial activity of TC. Thus, this study contributed to understanding the dynamics and distribution of TC in the environment and HS's potential in the remediation of antibiotics of this class in natural systems, as these can have adverse effects on ecosystems and human health.

Pore size distribution and Al oxide content significantly regulated the effects of humic acid on perfluorooctanoic acid transport in natural soils

The ubiquity of dissolved organic matter (DOM) makes it encounter the released perfluorooctanoic acid (PFOA) in subsurface environment. However, the effect of DOM (e.g., humic acid, HA) on PFOA transport in soils and the critical influencing factors and mechanisms remain obscure. Column experiments were conducted to explore PFOA transport with the presence of different concentrations of HA in three types of soils and two types of Al oxide coated sand. Results revealed soil properties significantly regulate the effects of HA on PFOA transport, for which pore size distribution, minerals content (e.g., Al oxide) and pH were critical influencing soil-properties. For soil with large mesopore volume, pore blockage caused by HA controlled the effect of HA on PFOA transport. Large mesopore volume significantly alleviated pore blockage of HA, and led to insignificant effects of HA on PFOA transport. For soil exhibited minimum mesopore volume, Al oxide content and pH dominated the effect of HA on PFOA transport. Results from Al oxide coated sand (low mesopore volume) columns further proved that higher Al oxide content and lower pH caused more significant facilitating effect of HA on PFOA transport via site competition. Results highlighted the importance of considering pore size distribution and Al oxide content when assessing PFOA mobility capacity with co-transport with DOM in soils.

Coagulation performance and mechanism analysis of humic acid by using covalently bonded coagulants: effect of pH and matching mechanism of humic acid functional groups

Conventional inorganic coagulants (Al, Fe) and Al/Fe-based covalently bonded flocculants (CAFMs) had different hydrolysis species at different pHs, which subsequently led to differences in their binding sites and complexation ability with humic acid (HA). Studying the binding sites and interactions between CAFMs, AlCl3 (Al), and FeCl3 (Fe) hydrolysates and HA molecules is critical to understanding the coagulation mechanism. The results found that CAFM 0.6, Al, and AlCl3 combined FeCl3 (Al/Fe) removed more than 90% of HA at pH 6, and CAFMs showed higher HA removal rate than that of Al, Fe, and Al/Fe under the same reaction conditions. The flocs of CAFMs contained abundant -NH2/OH as well as the large particle size, compact structure, and excellent settling performance. The hydrolyzed species of Al and Fe were predominantly Alb and Feb at pH 6, but the hydrolyzed species of CAFMs were primarily (Al + Fe)c. Moreover, the hydrolyzed species of Al and Al/Fe were found to complex with HA functional groups such as -COOH, C = O, C-H/C-C, C = C, and C-OH to form ligand bonds, while the hydrolyzed species (Al + Fe)c of CAFMs could deeply interact with HA functional groups including C-O, -COOH, C = O, C-H/C-C, C = C, and C-OH by the adsorption and sweeping.

Synergistic effects of Fe-based nanomaterial catalyst on humic substances formation and microplastics mitigation during sewage sludge composting

In this study, a novel Fe-based nanomaterial catalyst (Fe0/FeS) was synthesized via a self-heating process and employed to explore its impact on the formation of humic substances and the mitigation of microplastics. The results reveal that Fe0/FeS exhibited a significant increase in humic acid content (71.01 mg kg-1). Similarly, the formation of humic substances resulted in a higher humification index (4.91). Moreover, the addition of Fe0/FeS accelerated the degradation of microplastics (MPs), resulting in a lower concentration of MPs (9487 particles/kg) compared to the control experiments (22792 particles/kg). Fe0/FeS significantly increased the abundance of medium-sized MPs (50-200 μm) and reduced the abundance of small-sized (10-50 μm) and large-sized MPs (>1000 μm). These results can be attributed to the Fe0/FeS regulating the ▪OH production and specific microorganisms to promote humic substance formation and the degradation of MPs. This study proposes a feasible strategy to improve composting characteristics and reduce contaminants.

New insights into the effect of pyrolysis temperature on the spectroscopy properties of dissolved organic matter in manure-based biochar

Dissolved organic matter (DOM) derived from biochar takes a crucial role in transport and bioavailability toward contaminants; hence, it is undeniable that a thorough analysis of its properties is important. So far, the effect of pyrolysis temperature on the functional groups, components, and evolutionary sequence of manure-based biochar DOM has not been adequately investigated. Here, DOM was released from two typical livestock manures (cow and pig) at five pyrolysis temperatures (300 ~ 700°C), and it was explored in depth with the aid of moving window 2D correlation spectroscopy (MW-2D-COS) and heterogeneous 2D correlation spectroscopy (hetero-2D-COS). The results demonstrated that the concentration, aromaticity, and hydrophobicity of DOM were greater at high temperatures, and more DOM was liberated from cow manure-based biochar at identical temperature. Protein-like compounds dominated at high temperatures. The pyrolysis temperatures of final configuration transformation points of the fulvic acid-like component and the aromatic ring C=C in DOM were 400°C and 500°C, respectively. Moreover, Fourier transform infrared spectroscopy combined with two-dimensional correlation analysis indicated that the functional group evolution of DOM depends on the pyrolysis temperature and feedstock type. The study provides a new perspective on manure management and environmental applications of biochar.

Preparation of ionic liquid modified graphene composites and their adsorption mechanism of arsenic (V) in aqueous solution

Graphene (GR) is a new type of carbon-based material that combines many excellent properties. In order to give full play to the excellent properties of graphene and expand its application scope, this study used ionic liquid SbF6 to modify it and successfully prepared ionic liquid modified graphene composites (H/GR), and studied its adsorption mechanism of arsenic in aqueous solution. By investigating the effects of reaction temperature, reaction time, pH, adsorbent (H/GR) dosage, and humic acid concentration on the removal rate of arsenic in aqueous solution, the experimental results showed that when the reaction temperature was 30 °C, reaction time was 1 h, pH was 6, H/GR dosage was 0.1g·L-1, and humic acid (HA) concentration was 10 mg·L-1, the best arsenic removal effect was achieved with a maximum. The removal rate was 99.4%. The equilibrium adsorption capacity was well modeled by the Langmuir, Freundlich, and Tenkin models at 30 °C. The Langmuir adsorption isotherm was the most consistent, with a calculated maximum value of 137.95 mg·g-1, which is higher than most adsorbents in the field. In addition, it was determined that the graphene surface was indeed immobilized with the ionic liquid [Hmim]SbF6 by SEM mapping and EDS energy spectroscopy observation, and the adsorption isotherms and pore size distribution maps of graphene before and after the loading of the ionic liquid were analyzed by BET, which further confirmed a significant increase in the microporosity and porosity of the modified H/GR, and furthermore, it was demonstrated that the arsenic ions are chemically bonded with and indeed adsorbed on the surface of the H/GR by FT-IR and XPS characterization analyses. The results of all experimental data studies indicate that the main mechanism of As(V) removal from water by H/GR is due to electrostatic adsorption, ion exchange, and complexation between the modified graphene itself and the ionic liquid [Hmim]SbF6 itself.

The role of magnesium ion in the interactions between humic acid and tetracycline in solution

Coexisting tetracycline (TC), dissolved organic matter (DOM), and metal cations in aqueous environments might form complexes and consequently affect the environmental fate of TC. In this study, the interactions among coexisting humic acid (HA), TC, and Mg(II) in solutions were investigated by equilibrium dialysis batch experiments and nuclear magnetic resonance hydrogen spectroscopy (1H NMR) characterization. In the binary systems, the dimethylamine (4Me2NH+) functional group on the A-ring of TC bound to the oxygen-containing functional groups of HA via hydrogen bond. The solution pH affected the agglomeration morphology and dissociation of the oxygen-containing functional groups of HA as well as protonation and spatial conformation of TC, which in turn affected the HA-TC interactions. The complexation sites and ratio of Mg(II) on TC affect the binding mode in the ternary system. When the TC-Mg(II) complexation ratio is 1:1, the B, C, and D rings of TC preferentially complex with Mg(II), resulting in the change of TC from an extended to a twisted conformation. At this time, Mg(II) had a weaker inhibitory effect on binding affinity between HA and TC. When the complexation ratio was 1:2, the second Mg(II) complexation deactivated the 4Me2NH + on the A ring and further stabilized TC twisted conformation, resulting in a stronger inhibitory effect on the binding of TC to HA. Under acidic conditions, the solution pH mainly caused the difficulty in forming TC-Mg(II) complexes. The inhibitory effect of Mg(II) on the binding between HA and TC is weaker than that under alkaline conditions.

Spectroscopic insights into the binding characteristics of heavy metals to dissolved organic matter in landfill leachate

Landfill leachate is produced in the process of sanitary landfilling, which contains significant amounts of dissolved organic matter (DOM) and heavy metal contaminants. Insights into the interactions between heavy metals and DOM in landfill leachate are beneficial for the understanding of heavy metal fates and optimization of landfill leachate treatment. In this work, the coherent structural changes of landfill leachate DOM during binding with various heavy metals were explored through the integration of molecular spectroscopic methods with chemometrics and statistic correlation analyses. The results indicate that protein substances, phenolic and discrete carboxyl groups in landfill leachate DOM were involved in the complexation with heavy metals, resulting in the formation of conjugated macromolecules/aggregates with high aromaticity and molecular weight/size. The fluorescent protein-like, fulvic acid-like, and humic-like fractions in DOM were engaged in the interaction, which were closely related to phenolic-like and carboxylic-like structure. Compared to membrane concentrates DOM, raw leachate DOM exhibited a higher binding affinity to heavy metals (especially for Cu2+, whilst the weakest was Cd2+). The integrated approach provides useful information in elucidating the binding processes of metals with landfill leachate DOM, including site heterogeneity, binding strength and functional group sequences.

Spatial heterogeneity and compositional profiles of dissolved organic matter in farmland soils across mainland China

Dissolved organic matter (DOM) plays an essential role in many geochemical processes, however its complexity, chemical diversity, and molecular composition are poorly understood. Soil samples were collected from 500 vegetable fields in administrative regions of mainland China, of which 122 were selected for further investigation. DOM properties were characterized by three-dimensional excitation-emission matrix (3D-EEM) fluorescence spectroscopy and Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) (field intensity is 15 Tesla). Our results indicated that the main constituents were UVA humic-like substances, humic-like substances, fulvic acid-like substances, and tyrosine-like substances. A total of 10,989 molecular formulae with a mass range of 100.04 to 799.59 Da were detected, covering the mass spectrometric information of the soil samples from 27 different regions. CHO and CHON molecules were dominant in DOM, whereas lignin, tannins, and aromatic substances served as the main components. The results of cluster analysis revealed that the soil properties in Jiangxi Province were considerably different from those in other regions. The key backgrounds of the DOM molecular characteristics in the vegetable-field soil samples across mainland China were provided at the molecular level, with large abundance and great variability.