PtCuNi Tetrahedra Catalysts with Tailored Surfaces for Efficient Alcohol Oxidation

Direct methanol/ethanol alkaline fuel cells (DMAFCs/DEAFCs) represent an attractive mobile power generation technology. The methanol/ethanol oxidation reaction (MOR/EOR) often requires high-performance yet expensive Pt-based catalysts that may be easily poisoned. Herein, we report the development of PtCuNi tetrahedra electrocatalysts with optimized specific activity and mass activity for MOR and EOR. Our synthetic and structural characterizations show that these PtCuNi tetrahedra have Cu-rich core and PtNi-rich shell with tunable surface composition. Electrocatalytic studies demonstrate that Pt₅₆Cu₂₈Ni₁₆ exhibits exceptional MOR and EOR specific activities of 14.0 ± 1.0 mA/cm² and 11.2 ± 1.0 mA/cm², respectively and record high mass activity of 7.0 ± 0.5 A/mg_Pt and 5.6 ± 0.6 A/mg_Pt, comparing favorably with the best MOR or EOR Pt alloy-based catalysts reported to date. Furthermore, we show that the unique core-shell tetrahedra configuration can also lead to considerably improved durability.

Continuous Flow Methods of Fabricating Catalytically Active Metal Nanoparticles

One of the obstacles preventing the commercialization of colloidal nanoparticle catalysts is the difficulty in fabricating these materials at scale while maintaining a high level of control over their resulting morphologies, and ultimately, their properties. Translation of batch-scale solution nanoparticle syntheses to continuous flow reactors has been identified as one method to address the scaling issue. The superior heat and mass transport afforded by the high surface-area-to-volume ratios of micro- and millifluidic channels allows for high control over reaction conditions and oftentimes results in decreased reaction times, higher yields, and/or more monodisperse size distributions compared to an analogous batch reaction. Furthermore, continuous flow reactors are automatable and have environmental health and safety benefits, making them practical for commercialization. Herein, a discussion of continuous flow methods, reactor design, and potential challenges is presented. A thorough account of the implementation of these technologies for the fabrication of catalytically active metal nanoparticles is reviewed for hydrogenation, electrocatalysis, and oxidation reactions.

Alloy Nanocatalysts for the Electrochemical Oxygen Reduction (ORR) and the Direct Electrochemical Carbon Dioxide Reduction Reaction (CO2 RR)

In the face of the global energy challenge and progressing global climate change, renewable energy systems and components, such as fuel cells and electrolyzers, which close the energetic oxygen and carbon cycles, have become a technology development priority. The electrochemical oxygen reduction reaction (ORR) and the direct electrochemical carbon dioxide reduction reaction (CO₂ RR) are important electrocatalytic processes that proceed at gas diffusion electrodes of hydrogen fuel cells and CO₂ electrolyzers, respectively. However, their low catalytic activity (voltage efficiency), limited long-term stability, and moderate product selectivity (related to their Faradaic efficiency) have remained challenges. To address these, suitable catalysts are required. This review addresses the current state of research on Pt-based and Cu-based nanoalloy electrocatalysts for ORR and CO₂ RR, respectively, and critically compares and contrasts key performance parameters such as activity, selectivity, and durability. In particular, Pt nanoparticles alloyed with transition metals, post-transition metals and lanthanides, are discussed, as well as the material characterization and their performance for the ORR. Then, bimetallic Cu nanoalloy catalysts are reviewed and organized according to their main reaction product generated by the second metal. This review concludes with a perspective on nanoalloy catalysts for the ORR and the CO₂ RR, and proposes future research directions.

Recommended Practices and Benchmark Activity for Hydrogen and Oxygen Electrocatalysis in Water Splitting and Fuel Cells

Electrochemical energy storage by making H₂ an energy carrier from water splitting relies on four elementary reactions, i.e., the hydrogen evolution reaction (HER), hydrogen oxidation reaction (HOR), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). Herein, the central objective is to recommend systematic protocols for activity measurements of these four reactions and benchmark activities for comparison, which is critical to facilitate the research and development of catalysts with high activity and stability. Details for the electrochemical cell setup, measurements, and data analysis used to quantify the kinetics of the HER, HOR, OER, and ORR in acidic and basic solutions are provided, and examples of state-of-the-art specific and mass activity of catalysts to date are given. First, the experimental setup is discussed to provide common guidelines for these reactions, including the cell design, reference electrode selection, counter electrode concerns, and working electrode preparation. Second, experimental protocols, including data collection and processing such as ohmic- and background-correction and catalyst surface area estimation, and practice for testing and comparing different classes of catalysts are recommended. Lastly, the specific and mass activity activities of some state-of-the-art catalysts are benchmarked to facilitate the comparison of catalyst activity for these four reactions across different laboratories.

Multishell Hollow Metal/Nitrogen/Carbon Dodecahedrons with Precisely Controlled Architectures and Synergistically Enhanced Catalytic Properties

Multishell hollow nanoarchitectures are one of the most important branches in the nanomaterial field due to their enormous potential in many fields, but synthesizing them in a well-controlled manner remains challenging. Herein, we present a general strategy for the construction of multishell hollow metal/nitrogen/carbon dodecahedrons (metal@NC) with well-defined and precisely controlled architectures. This strategy is based on the pyrolysis of multilayer solid ZIFs prepared by a step-by-step crystal growth approach, which enables precise control over the shell number and composition of the resultant hollow metal@NC. Impressively, our strategy can be further extended to the synthesis of yolk@multishell hollow structures or multishell hollow structures that are assembled by carbon nanotubes. The multishell hollow structures can efficiently facilitate the mass diffusion, which together with the high dispersity and increased surface area are responsible for their significantly enhanced catalytic performances for the selective hydrogenation of biomass-derived furfural to cyclopentanol when compared with their solid and single-shell counterparts. We anticipate that our general strategy would shed light on the rational design and accurate construction of other complex multishell hollow materials for various important yet challenging applications.

Multiscale atomistic simulation of metal nanoparticles under working conditions

With the fast development of in situ experimental methodologies, dramatic structure reconstructions of nanomaterials that only occur under reaction conditions have been discovered in recent years, which are critical for their application in catalysis, biomedicine, and biosensors. A big challenge for theoreticians is thus to establish reliable models to reproduce the experimental observations quantitatively, and further to make predictions beyond experimental conditions. Herein, we briefly summarize the recent theoretical advances involving the quantitative predictions of equilibrium shapes of metal nanoparticles under reaction conditions and the real-time simulations of nanocrystal transformations. The comparisons between the theoretical and experimental results are presented. This minireview not only helps researchers understand the in situ observations at the atomic level, but also is beneficial for prescreening and optimizing the NPs for practical use.

Tweaking the Interplay among Galvanic Exchange, Oxidative Etching, and Seed-Mediated Deposition toward Architectural Control of Multimetallic Nanoelectrocatalysts

Nanoscale galvanic exchange confined by metallic nanoparticles is an intriguing structure-remodeling process that transforms geometrically simple solid nanoparticles into multimetallic hollow nanoparticles with increased structural complexity and compositional diversity. Using liquid polyols with intrinsic reducing capabilities as the reaction medium for nanoparticle-templated galvanic exchange represents an interesting paradigm shift, allowing us to interface galvanic exchange with oxidative etching and seed-mediated deposition without introducing any additional oxidizing or reducing agents. By kinetically maneuvering the interplay among galvanic Cu-Pt exchange, oxidative Cu etching, and seed-mediated Pt deposition, we have been able to selectively transform AuCu₃ alloy nanoparticles into two architecturally distinct multimetallic heteronanostructures, namely, Au-Pt alloy skin-covered spongy nanoparticles and Pt nanodendrite-covered hollow nanoparticles, both of which exhibit unique structural features highly desirable for high-performance electrocatalysis. Using the formic acid oxidation and hydrogen evolution reactions in acidic electrolytes as model electrocatalytic reactions, we show that the multimetallic nanoparticles derived from AuCu₃ alloy nanoparticles through polyol-mediated galvanic exchange reactions markedly outperform the commercial Pt/C benchmark catalysts in terms of both activity and durability. This work not only provides important mechanistic insights on how galvanic exchange dynamically interplays with other redox processes to rigorously dictate the versatile structural transformations of multimetallic nanoparticles but also sheds light on the detailed structure-property relationships underpinning the intriguing electrocatalytic behaviors of architecturally complex multimetallic heteronanostructures.

Noble Metal Based Alloy Nanoframes: Syntheses and Applications in Fuel Cells

Noble metal nanostructures are being used broadly as catalysts for energy conversion in fuel cells. To overcome the future energy crises, fuel cells are anticipated as clean energy sources because they can be operated at low temperature, their energy conversion is high and their carbon release is almost zero. However, an active and stable electrocatalyst is essential for the electrochemical reactions in fuel cells. Therefore, properties of the nanostructures greatly depend on the shape of the nanostructures. Individual as well as interaction properties are greatly affected by changes in the surface area of the nanostructures. By shape controlled synthesis, properties of the nanostructures could be further enhanced by increasing the surface area or active sites for electrocatalysts. Therefore, an efficient approach is needed for the fabrication of nanostructures to increase their efficiency, activity, or durability in fuel cells by reducing the usage of noble metals. Different types of hollow nanostructures until now have been prepared including nanoboxes, nanocages, nanoshells, nanoframes (NFs), etc. NFs are the hollow unique three-dimensional structure which have no walls-they only contain corners or edges so they have large surface area. In electrocatalytic reactions, the molecules involved in the reaction can easily reach the inner surface of the nanoframes, thus noble metals' utilization efficiency increases. NFs usually have high surface area, greater morphological and compositional stabilities, allowing them to withstand harsh environmental conditions. By considering the current challenges in fabrication of noble metal based alloy NFs as electrocatalysts, this review paper will highlight recent progress, design, and fabrication of noble metal alloy NFs through different strategies-mainly photocatalytic template, electrodeposition, Kirkendall effect, galvanic replacement, chemical/oxidative etching, combination of both and other methods. Then, electrochemical applications of NFs in fuel cells toward formic acid, methanol, ethanol, oxygen reduction reaction as well as bifunctional catalyst will also be highlighted. Finally, we will summarize different challenges in the fabrication of highly proficient nanocatalysts for the fuel cells with low cost, high efficiency and high durability, which are the major issues for the highly commercial use of fuel cells in the future.

Magnetically Hollow Pt Nanocages with Ultrathin Walls as a Highly Integrated Nanoreactor for Catalytic Transfer Hydrogenation Reaction

Fabricating efficient and stable nanocatalysts for chemoselective hydrogenation of nitroaromatics is highly desirable because the amines hold tremendous promise for the synthesis of nitrogen containing chemicals. Here, a highly reactive and stable porous carbon nitride encapsulated magnetically hollow platinum nanocage is developed with subnanometer thick walls (Fe3O4@snPt@PCN) for this transformation. This well-controlled nanoreactor is prepared via the following procedures: the preparation of core template, the deposition of platinum nanocage with subnanometer thick walls, oxidative etching, and calcination. This highly integrated catalyst demonstrates excellent performance for the catalytic transfer hydrogenation of various nitroaromatics and the reaction can reach >99% conversion and >99% selectivity. With the ultrathin wall structure, the atom utilization of platinum atoms is highly efficient. The X-ray photoelectron spectroscopy results indicate that partial electrons transfer from the iron oxides to Pt nanowalls, and this increases the electron density of snPt nanoparticles, thus promoting the catalytic activity for the transfer hydrogenation of nitroaromatics. For the reduction of 4-nitrophenol, the reaction rate constant K app is 0.23 min-1 and the turnover frequency (TOF) is up to 3062 h-1. Additional reaction results illustrate that this magnetic nanoreactor can be reused more than eight times and it is a promising catalytic nanoplatform in heterogeneous catalysis.

Kinetics, energetics, and size dependence of the transformation from Pt to ordered PtSn intermetallic nanoparticles

The outstanding catalytic activity and chemical selectivity of intermetallic compounds make them excellent candidates for heterogeneous catalysis. However, the kinetics of their formation at the nanoscale is poorly understood or characterized, and precise control of their size, shape and composition during synthesis remains challenging. Here, using well-defined Pt nanoparticles (5 nm and 14 nm) encapsulated in mesoporous silica, we study the transformation kinetics from monometallic Pt to intermetallic PtSn at different temperatures by a series of time-evolution X-ray diffraction studies. Observations indicate an initial transformation stage mediated by Pt surface-controlled intermixing kinetics, followed by a second stage with distinct transformation kinetics corresponding to a Ginstling-Brounstein (G-B) type bulk diffusion mode. Moreover, the activation barrier for both surface intermixing and diffusion stages is obtained through the development of appropriate kinetic models for the analysis of experimental data. Our density-functional-theory (DFT) calculations provide further insights into the atomistic-level processes and associated energetics underlying surface-controlled intermixing.

Conversion of bimetallic PtNi3 nanopolyhedra to ternary PtNiSn nanoframes by galvanic replacement reaction

Hollow multimetallic PtNiSn nanoparticles (NPs) were formed from solid Ni-core/Pt-frame NPs by the galvanic replacement reaction (GRR) of Ni by Sn. The GRR was performed by adding SnCl4·5H2O dissolved in ethylene glycol into the PtNi3 NPs containing suspension. The reaction yielded nanoframes with a hollow interior, having Pt-rich edges covered with a thin, incomplete Sn layer. They were investigated using transmission electron microscopy (TEM), energy dispersion X-ray spectroscopy (EDS) and X-ray diffraction (XRD). EDS analysis showed that the GRR rate could be modified by changing the solvent and the concentration of tin ions. Indeed, compared to water, ethylene glycol was found to facilitate the reduction of tin chloride and to affect nickel dissolution. TEM analysis revealed that the galvanic replacement of nickel and tin involves two different mechanisms. The first one consists of nickel oxidation followed by reduction of tin ions. In the second mechanism, oxidation of nickel and reduction of tin ions occur simultaneously.

Trimetallic PtPdCo mesoporous nanopolyhedra with hollow cavities

The rational design of metallic mesoporous nanoarchitectures with hollow cavities offers an effective way to boost their performance in various catalytic fields. Herein, we report a facile two-step strategy for the fabrication of trimetallic PtPdCo mesoporous nanopolyhedra with hollow cavities (PtPdCo MHNPs), in which Pd@PtPdCo core-shell mesoporous nanopolyhedra (Pd@PtPdCo MNPs) are directly prepared by a simple chemical reduction reaction followed by etching of the Pd cores. The PtPdCo MHNPs show enhanced electrocatalytic activity and durability for the methanol oxidation reaction, enabled by their mesoporous and hollow nanoarchitectures coupled with trimetallic compositions.

Engineering Surface Structure of Pt Nanoshells on Pd Nanocubes to Preferentially Expose Active Surfaces for ORR by Manipulating the Growth Kinetics

Synthesis of Pt nanoshells on substrates can increase the utilization efficiency of Pt atoms and reduce the amount of Pt used in the applications. However, it is still an enormous challenge in tailoring the required crystal facets of Pt nanoshells on a given substrate. In this work, we demonstrate a facile and convenient approach capable for generating Pt octahedral islands with tunable sizes and densities on Pd nanocubes by manipulating the deposition rate. The key to this synthesis is the fine control over the deposition rate of Pt on Pd seeds. Because of the different reactivities at the surface sites, the deposition of Pt can be controlled at a certain site by carefully tuning the deposition rate. With a low concentration of reductant (8.33 mg/mL of glucose), surface diffusion dominates the process, and thus the Pt cubic shells form on Pd cubic seeds. In contrast, when a higher amount of the reductant (16.67 mg/mL of glucose) is added, the deposition starts to dominate the growth of Pt shells. In this case, the deposition would be controlled at the corners, forming eight large Pt octahedra on a cubic Pd seed. Further increasing the deposition rate can induce much higher deposition rates, in which case, the deposition of Pt would likely take place not only at the corners, but also the edge and surface sites of the seeds. Not surprisingly, this growth habit can result in the formation of high-density octahedral islands on Pd cubic seeds. With the same amount of precursor supply, the higher the densities of Pt islands, the smaller the size of the octahedral islands on Pd nanocubes. Unlike other synthetic methods, the size of the octahedral islands on Pd seeds can be even controlled to be smaller than 3 nm by controlling the amount of the Pt precursor. Considering the excellent performance of {111} facets of Pt catalysts toward ORR, the Pt nanocages with small octahedral islands on the surfaces can exhibit a high activity with a mass activity 0.68 A/mg, as high as 5.2 times of that of commercial Pt/C.

Designing Robust Support for Pt Alloy Nanoframes with Durable Oxygen Reduction Reaction Activity

Polymer electrolyte membrane fuel cells are appealing to resolve the environmental and energy issues but are still heavily inhibited by the dilemma of fabricating effective and durable electrocatalysts for oxygen reduction reaction (ORR). In this work, highly open Pt₃Cu nanoframes and one-dimensional, hollow titanium nitride architectures are both successfully explored and implemented as the new system to replace the traditional Pt-carbon motif. The ORR performance of the obtained electrocatalyst shows specific and mass activities of 5.32 mA cm^-2 and 2.43 A mg_Pt^-1, respectively, which are 14.4 and 11.6 times higher than those of the commercial Pt/C. Notably, the novel catalyst also exhibits high stability and a much slower performance degradation than that of the benchmarked Pt₃Cu/C with the same durability testing procedures. The comprehensive data confirm that the new type of catalyst possesses a high charge transfer during the ORR process, and the unique structure and synergistic effects between anchored Pt and the support mainly contributes to the high stability. This work provides a strategic method for designing an effective ORR electrocatalyst with desirable stability.

Tunable intrinsic strain in two-dimensional transition metal electrocatalysts

Tuning surface strain is a powerful strategy for tailoring the reactivity of metal catalysts. Traditionally, surface strain is imposed by external stress from a heterogeneous substrate, but the effect is often obscured by interfacial reconstructions and nanocatalyst geometries. Here, we report on a strategy to resolve these problems by exploiting intrinsic surface stresses in two-dimensional transition metal nanosheets. Density functional theory calculations indicate that attractive interactions between surface atoms lead to tensile surface stresses that exert a pressure on the order of 10⁵ atmospheres on the surface atoms and impart up to 10% compressive strain, with the exact magnitude inversely proportional to the nanosheet thickness. Atomic-level control of thickness thus enables generation and fine-tuning of intrinsic strain to optimize catalytic reactivity, which was confirmed experimentally on Pd(110) nanosheets for the oxygen reduction and hydrogen evolution reactions, with activity enhancements that were more than an order of magnitude greater than those of their nanoparticle counterparts.

Nanoscale Structure Design for High-Performance Pt-Based ORR Catalysts

Proton-exchange-membrane fuel cells (PEMFCs) are of considerable interest for direct chemical-to-electrical energy conversion and may represent an ultimate solution for mobile power supply. However, PEMFCs today are primarily limited by the sluggish kinetics of the cathodic oxygen reduction reaction (ORR), which requires a significant amount of Pt-based catalyst with a substantial contribution to the overall cost. Hence, promoting the activity and stability of the needed catalyst and minimizing the amount of Pt loaded are central to reducing the cost of PEMFCs for commercial deployment. Considerable efforts have been devoted to improving the catalytic performance of Pt-based ORR catalysts, including the development of various Pt nanostructures with tunable sizes and chemical compositions, controlled shapes with selectively displayed crystallographic surfaces, tailored surface strains, surface doping, geometry engineering, and interface engineering. Herein, a brief introduction of some fundamentals of fuel cells and ORR catalysts with performance metrics is provided, followed by a detailed description of a series of strategies for pushing the limit of high-performance Pt-based catalysts. A brief perspective and new insights on the remaining challenges and future directions of Pt-based ORR catalysts for fuel cells are also presented.

Trimetallic PtPdNi-Truncated Octahedral Nanocages with a Well-Defined Mesoporous Surface for Enhanced Oxygen Reduction Electrocatalysis

Engineering the architectures and compositions of noble metal-based nanocrystals is an effective strategy to optimize their catalytic performance. Herein, we report the synthesis of unique trimetallic PtPdNi mesoporous-truncated octahedral nanocages (PtPdNi MTONs), which is simply performed by first constructing Pd@PtPdNi core-shell mesoporous truncated octahedra (Pd@PtPdNi MTOs) and further selective etching of the Pd cores using concentrated nitric acid. The rational combinations of polyhedral shape, mesoporous surface, and hollow structure provide sufficiently exposed active sites and efficient reactant permeability. With these unique properties, the PtPdNi MTONs show improved catalytic activity and stability toward the oxygen reduction reaction.

Ternary Heterostructural Pt/CNx/Ni as a Supercatalyst for Oxygen Reduction

We report here a supercatalyst for oxygen reduction of Pt/CNx/Ni in a unique ternary heterostructure, in which the Pt and the underlying Ni nanoparticles are separated by two to three layers of nitrogen-doped carbon (CNx), which mediates the transfer of electrons from the inner Ni to the outer Pt and protects the Ni against corrosion at the same time. The well-engineered low-Pt catalyst shows ∼780% enhanced specific mass activity or 490% enhanced specific surface activity compared with a commercial Pt/C catalyst toward oxygen reduction. More importantly, the exceptionally strong tune on the Pt by the unique structure makes the catalyst superbly stable, and its mass activity of 0.72 A/mgPt at 0.90 V (well above the US Department of Energy's 2020 target of 0.44 A/mgPt at 0.90 V) after 50,000 cyclic voltammetry cycles under acidic conditions is still better than that of the fresh commercial catalyst.

PtPdRh Mesoporous Nanospheres: An Efficient Catalyst for Methanol Electro-Oxidation

Porous multimetallic alloyed nanostructures possess unique physical and chemical properties to generate promising potential in fuel cells. However, the controllable synthesis of this kind of materials still remains challenging. Herein, we report a facile method for the one-pot, high-yield synthesis of trimetallic PtPdRh mesoporous nanospheres (PtPdRh MNs) under mild conditions. The resultant PtPdRh MNs possess the features of uniform shape, a narrow size distribution, plenty of well-defined mesopores, highly open structure, and multicomponent effects, which impart advantages such as large surface area, favorable mass diffusion, high utilization of electrocatalysts, and synergy among the various metal components. Benefitting from the synergetic effects originating from the multimetallic composition and unique mesoporous structure, the as-prepared PtPdRh MNs exhibit remarkably enhanced electrocatalytic performance for methanol oxidation reaction relative to bimetallic PtPd MNs and commercial Pt/C catalyst.

Topotactic Transformations in an Icosahedral Nanocrystal to Form Efficient Water-Splitting Catalysts

Designing high-performance, precious-metal-based, and economic electrocatalysts remains an important challenge in proton exchange membrane (PEM) electrolyzers. Here, a highly active and durable bifunctional electrocatalyst for PEM electrolyzers based on a rattle-like catalyst comprising a Ni/Ru-doped Pt core and a Pt/Ni-doped RuO₂ frame shell, which is topotactically transformed from an icosahedral Pt/Ni/Ru nanocrystal, is reported. The RuO₂ -based frame shell with its highly reactive surfaces leads to a very high activity for the oxygen evolution reaction (OER) in acidic media, reaching a current density of 10 mA cm^-2 at an overpotential of 239 mV, which surpasses those of previously reported catalysts. The Pt dopant in the RuO₂ shell enables a sustained OER activity even after a 2000 cycles of an accelerated durability test. The Pt-based core catalyzes the hydrogen evolution reaction with an excellent mass activity. A two-electrode cell employing Pt/RuO₂ as the electrode catalyst demonstrates very high activity and durability, outperforming the previously reported cell performances.

Recent advancements in Pt-nanostructure-based electrocatalysts for the oxygen reduction reaction

A comprehensive evaluation of Pt-nanostructure-based electrocatalysts for the oxygen reduction reaction.

Kinetics-assisted discrimination of active sites in Ru catalyzed hydrolytic dehydrogenation of ammonia borane

The kinetics-assisted method is simple yet effective in discriminating Ru edge atoms as the dominant active sites for the reaction.

Preparation of Ni@Pt core@shell conformal nanofibre oxygen reduction electrocatalysts via microwave-assisted galvanic displacement

Ni@Pt core@shell nanofibres with controlled platinum shell thickness and Pt/Ni ratio are synthesised by an extremely fast and reproducible route, allowing their direct use as electrocatalysts.

The dual-defective SnS2 monolayers: promising 2D photocatalysts for overall water splitting

Photocatalytic water splitting on the dual-defective SnS₂ monolayer is a promising way to produce hydrogen fuel from solar energy.

Bimetallic NiCo/CNF encapsulated in a N-doped carbon shell as an electrocatalyst for Zn–air batteries and water splitting

Bimetallic NiCo/CNF encapsulated in a N-doped carbon shell (NiCo/CNF@NC) catalyst for application in a Zn–air battery and water splitting has been reported in this work.

pH-Dependent growth of atomic Pd layers on trisoctahedral gold nanoparticles to realize enhanced performance in electrocatalysis and chemical catalysis

In this work, the controlled epitaxial growth of ultrathin Pd shells of a few atomic layers (denoted as nL) on the surfaces of gold nanoparticle (Au NP) cores of different morphologies (trisoctahedral, cubic, and spherical shapes) in the presence of cetyltrimethylammonium chloride (CTAC) was achieved by regulating the pH value of the aqueous CTAC solution and finely tuning the amount of the Pd precursor. It was found that the critical shell thickness for epitaxial Pd growth at the optimal pH value was 4 atomic layers, taking {331}-faceted trisoctahedral (TOH) Au@Pd_nL NPs as an example, on the basis of the results of atomic-resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) images. Moreover, the resulting TOH Au@Pd_1L NPs (100.9 m² g^-1, 13.2 A mg_Pd^-1 and 13.1 mA cm^-2) exhibited excellent electrocatalytic performance and long-term electrocatalytic activity for ethanol oxidation, around 4.8-fold, 66-fold, and 21.8-fold better than commercial Pd/C catalysts (31 m² g^-1, 0.2 A mg_Pd^-1, and 0.6 mA cm^-2). Furthermore, the resulting TOH Au@Pd_1L NPs not only markedly enhance the chemical catalytic activity for the reduction of 4-nitrophenol (4-NP), but also allow the in situ surface-enhanced Raman spectroscopy (SERS) monitoring of the reaction process of the Pd-catalyzed reduction of 4-NTP. Thus, our work may provide a new way to fabricate core-shell (CS) bimetallic NPs with the merits of both metal outer shells (excellent catalytic performance in electrocatalysis and chemical catalysis) and Au NP cores (reaction process by in situ SERS monitoring).

Solid-to-Hollow Conversion of Silver Nanocrystals by Surface-Protected Etching

Although hollow silver nanocrystals possess unique plasmonic properties, there is a lack of robust strategies to synthesize such nanocrystals with high efficiency and controllability. To solve this problem, a new surface-protected etching strategy to convert solid Ag nanocrystals, which are widely available from conventional syntheses, into their hollow counterparts, producing a family of hollow Ag nanocrystals is reported. Hollow Ag nanospheres and nanotubes were prepared conveniently in this way. The key was the surface modification of Ag nanocrystals by a minor amount of Pt prior to a controllable etching process, which accounts for enhanced stability of the Ag surface and subsequent etching of Ag from the inner part of the nanocrystals while retaining the overall crystal morphology. These hollow Ag nanocrystals showed distinctive optical properties, as demonstrated by the enhanced optical transmittance of flexible electrodes fabricated with Ag nanotubes, compared to nanowires. These hollow Ag nanocrystals hold promise in different plasmonic and electronic applications.

Favorable Core/Shell Interface within Co2P/Pt Nanorods for Oxygen Reduction Electrocatalysis

Nanostructures with nonprecious metal cores and Pt ultrathin shells are recognized as promising catalysts for oxygen reduction reaction (ORR) to enhance Pt efficiency through core/shell interfacial strain and ligand effects. However, core/shell interaction within a real catalyst is complex and due to the presence of various interfaces in all three dimensions is often oversimply interpreted. Using Co₂P/Pt core/shell structure as a model catalyst, we demonstrate, through density functional theory (DFT) calculations that forming Co₂P(001)/Pt(111) interface can greatly improve Pt energetics for ORR, while Co₂P(010)/Pt(111) is highly detrimental to ORR catalysis. We develop a seed-mediated approach to core/shell Co₂P/Pt nanorods (NRs) within which Co₂P(001)/Pt(111) interface is selectively expressed over the side facets and the undesired Co₂P(010)/Pt(111) interface is minimized. The resultant Co₂P/Pt NRs are highly efficient in catalyzing ORR in acid, superior to benchmark CoPt alloy and Pt nanoparticle catalyst. As the first example of one-dimensional (1D) core/shell nanostructure with an ultrathin Pt shell and a nonprecious element core, this strategy could be generalized to develop ultralow-loading precious-metal catalysts with favorable core/shell interactions for ORR and beyond.

Citrate-Coated, Size-Tunable Octahedral Platinum Nanocrystals: A Novel Route for Advanced Electrocatalysts

The development of green and scalable syntheses for the preparation of size- and shape-controlled metal nanocrystals is of high interest in many areas, including catalysis, electrocatalysis, nanomedicine, and electronics. In this work, a new synthetic approach based on the synergistic action of physical parameters and reagents produces size-tunable octahedral Pt nanocrystals, without the use of catalyst-poisoning reagents and/or difficult-to-remove coatings. The synthesis requires sodium citrate, ascorbic acid, and fine control of the reduction rate in aqueous environment. Pt octahedral nanocrystals with particle size as low as 7 nm and highly developed {111} facets have been achieved, as demonstrated by transmission electron microscopy, X-ray diffraction, and electrochemical methods. The absence of sticky molecules together with the high quality of the surface makes these nanocrystals ideal candidates in electrocatalysis. Notably, 7 nm bismuth-decorated octahedral nanocrystals exhibit superior performance for the electrooxidation of formic acid in terms of both specific and mass activities.