Alternative antimicrobial approach: nano-antimicrobial materials

Enhanced antibacterial activity of hemocyanin purified from Portunus pelagicus hemolymph combined with silver nanoparticles - Intracellular uptake and mode of action

Recently, biogenic nanoparticles have been considered promising candidates for manufacturing antibacterial nanodrugs. Here, we synthesized AgNPs using the crab-borne antibacterial agent hemocyanin and assessed the antibacterial action against several pathogenic bacteria. In this study, the crustacean immune protein hemocyanin (Pp-Hc, 78 kDa) purified from Portunus pelagicus hemolymph was used to fabricate silver nanoparticles. Characterization of hemocyanin-fabricated AgNPs (Pp-Hc AgNPs) were achieved using ultraviolet-visible spectrophotometer, X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), high-resolution-transmission electron microscopy (HR-TEM), and energy-dispersive X-ray spectroscopy. The antibacterial efficacy of AgNO_3,Pp-Hc and Pp-Hc AgNPs was compared by growth inhibition, antibiofilm and live and dead analyses. Based on the results, Pp-Hc AgNPs was more efficient than Pp-Hc and AgNO₃ against pathogenic bacteria. Mechanistic analysis revealed membrane damage and reactive oxygen species (ROS) generation, suggesting that Pp-Hc and Pp-Hc AgNPs rely to similar modes of action. Intracellular protein molecules and nucleic acid leakage confirmed that Pp-Hc AgNPs increase membrane permeability, leading to cell death. Based on our results, capping of the exterior surface of nanoparticles with antimicrobial crab-borne peptides, such as Pp-Hc, improves their functions as potential agents against bacterial diseases, which may be useful in clinical applications.

The Antibacterial Activities of NiO Nanoparticles Against Some Gram-Positive and Gram-Negative Bacterial Strains

Introduction: Given the increasing rate of antibiotic resistance among bacterial strains, many researchers have been working to produce new and efficient and inexpensive antibacterial agents. It has been reported that some nanoparticles may be used as novel antimicrobial agents.Here, we evaluated antibacterial properties of nickel oxide (NiO) nanoparticles. Methods: NiO nanoparticles were synthesized using microwave method. In order to control the quality and morphology of nanoparticles, XRD (X-ray diffraction) and SEM (scanning electronmicroscope) were utilized. The antibacterial properties of the nanoparticles were assessed against eight common bacterial strains using agar well diffusion assay. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) were measured. Antibiotic resistance pattern of the bacteria to nine antibiotics was obtained by Kirby-Bauer disk diffusion method. Results: The crystalline size and diameter (Dc) of NiO nanoparticles were obtained 40-60 nm. The nanoparticles were found to inhibit the growth of both gram-positive and gram-negative bacteria with higher activity against gram-positive organisms. Among bacterial strains, maximum sensitivity was observed in Staphylococcus epidermidis with MIC and MBC of 0.39 and 0.78 mg/mL, respectively. The bacteria had high resistance to cefazolin, erythromycin, rifampicin,ampicillin, penicillin and streptomycin.Conclusion: NiO nanoparticles exhibited remarkable antibacterial properties against gram positive and gram-negative bacteria and can be a new treatment for human pathogenic and antibiotic-resistant bacteria.

The Role of Nanomaterials in the Treatment of Diseases and Their Effects on the Immune System

Nanotechnology has been widely exploited in recent years in various applications. Different sectors of medicine and treatment have also focused on the use of nanoproducts. One of the areas of interest in the treatment measures is the interaction between nanomaterials and immune system components. Engineered nanomaterials can stimulate the inhibition or enhancement of immune responses and prevent the detection ability of the immune system. Changes in immune function, in addition to the benefits, may also lead to some damage. Therefore, adequate assessment of the novel nanomaterials seems to be necessary before practical use in treatment. However, there is little information on the toxicological and biological effects of nanomaterials, especially on the potential ways of contacting and handling nanomaterials in the body and the body response to these materials. Extensive variation and different properties of nanomaterials have made it much more difficult to access their toxicological effects to the present. The present study aims to raise knowledge about the potential benefits and risks of using the nanomaterials on the immune system to design and safely employ these compounds in therapeutic purposes.

Mesoporous Silica-Based Materials with Bactericidal Properties

Bacterial infections are the main cause of chronic infections and even mortality. In fact, due to extensive use of antibiotics and, then, emergence of antibiotic resistance, treatment of such infections by conventional antibiotics has become a major concern worldwide. One of the promising strategies to treat infection diseases is the use of nanomaterials. Among them, mesoporous silica materials (MSMs) have attracted burgeoning attention due to high surface area, tunable pore/particle size, and easy surface functionalization. This review discusses how one can exploit capacities of MSMs to design and fabricate multifunctional/controllable drug delivery systems (DDSs) to combat bacterial infections. At first, the emergency of bacterial and biofilm resistance toward conventional antimicrobials is described and then how nanoparticles exert their toxic effects upon pathogenic cells is discussed. Next, the main aspects of MSMs (e.g., physicochemical properties, multifunctionality, and biosafety) which one should consider in the design of MSM-based DDSs against bacterial infections are introduced. Finally, a comprehensive analysis of all the papers published dealing with the use of MSMs for delivery of antibacterial chemicals (antimicrobial agents functionalized/adsorbed on mesoporous silica (MS), MS-loaded with antimicrobial agents, gated MS-loaded with antimicrobial agents, MS with metal-based nanoparticles, and MS-loaded with metal ions) is provided.

Emerging Strategies to Combat ESKAPE Pathogens in the Era of Antimicrobial Resistance: A Review

The acronym ESKAPE includes six nosocomial pathogens that exhibit multidrug resistance and virulence: Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter spp. Persistent use of antibiotics has provoked the emergence of multidrug resistant (MDR) and extensively drug resistant (XDR) bacteria, which render even the most effective drugs ineffective. Extended spectrum β-lactamase (ESBL) and carbapenemase producing Gram negative bacteria have emerged as an important therapeutic challenge. Development of novel therapeutics to treat drug resistant infections, especially those caused by ESKAPE pathogens is the need of the hour. Alternative therapies such as use of antibiotics in combination or with adjuvants, bacteriophages, antimicrobial peptides, nanoparticles, and photodynamic light therapy are widely reported. Many reviews published till date describe these therapies with respect to the various agents used, their dosage details and mechanism of action against MDR pathogens but very few have focused specifically on ESKAPE. The objective of this review is to describe the alternative therapies reported to treat ESKAPE infections, their advantages and limitations, potential application in vivo, and status in clinical trials. The review further highlights the importance of a combinatorial approach, wherein two or more therapies are used in combination in order to overcome their individual limitations, additional studies on which are warranted, before translating them into clinical practice. These advances could possibly give an alternate solution or extend the lifetime of current antimicrobials.

Poly-ε-Caprolactone/Gelatin Hybrid Electrospun Composite Nanofibrous Mats Containing Ultrasound Assisted Herbal Extract: Antimicrobial and Cell Proliferation Study

Electrospun fibers have emerged as promising materials in the field of biomedicine, due to their superior physical and cell supportive properties. In particular, electrospun mats are being developed for advanced wound dressing applications. Such applications require the firers to possess excellent antimicrobial properties in order to inhibit potential microbial colonization from resident and non-resident bacteria. In this study, we have developed Poly-ε-Caprolactone /gelatin hybrid composite mats loaded with natural herbal extract (Gymnema sylvestre) to prevent bacterial colonization. As-spun scaffolds exhibited good wettability and desirable mechanical properties retaining their fibrous structure after immersing them in phosphate buffered saline (pH 7.2) for up to 30 days. The initial burst release of Gymnema sylvestre prevented the colonization of bacteria as confirmed by the radial disc diffusion assay. Furthermore, the electrospun mats promoted cellular attachment, spreading and proliferation of human primary dermal fibroblasts and cultured keratinocytes, which are crucial parenchymal cell-types involved in the skin recovery process. Overall these results demonstrated the utility of Gymnema sylvestre impregnated electrospun PCL/Gelatin nanofibrous mats as an effective antimicrobial wound dressing.

A perspective on biogenic synthesis of platinum nanoparticles and their biomedical applications

In recent era, the interest on inorganic nanoparticles is augmenting due to their engrossing and uncanny properties. Among them, platinum nanoparticles (PtNPs) are highly remarkable owing to their intrinsic physicochemical and biological properties making them an effective candidate towards catalytic and biomedical applications. Nevertheless, conventional physical and chemical methodologies of PtNPs synthesis are among the most prevalent protocols to synthesize PtNPs of desired shape and size. However, the above methods create notable concern to health and environment due to the use of harsh and toxic chemicals as well as violent reaction conditions. Hence, an economic, eco-friendly, non-toxic and sustainable route for the synthesis of PtNPs is the need of the hour to circumvent the shortcomings associated with conventional methodologies. In this aspect, the approach of green synthesis has lightened up the way for the environmentally benign synthesis of PtNPs. Interestingly, this review focuses chiefly on the green synthesis of PtNPs from various biological entities such as microorganisms, plants, seaweeds and other innovative miscellaneous protocols. Furthermore, it also summarizes the potential biomedical applications of PtNPs especially as an antibacterial agent and their role as nanomedicine. Overall, the emerging biogenic synthesis of PtNPs makes it feasible to foresee more promising biomedical outcomes in the upcoming future.

Cosmetic reconstruction in breast cancer patients: Opportunities for nanocomposite materials

The most common malignancy in women, breast cancer remains a major medical challenge that affects the life of thousands of patients every year. With recognized benefits to body image and self-esteem, the use of synthetic mammary implants for elective cosmetic augmentation and post-mastectomy reconstruction continues to increase. Higher breast implant use leads to an increased occurrence of implant-related complications associated with implant leakage and rupture, capsular contracture, necrosis and infections, which include delayed healing, pain, poor aesthetic outcomes and the need for revision surgeries. Along with the health status of the implant recipient and the skill of the surgeon, the properties of the implant determine the likelihood of implant-related complications and, in doing so, specific patient outcomes. This paper will review the challenges associated with the use of silicone, saline and "gummy bear" implants in view of their application in patients recovering from breast cancer-related mastectomy, and investigate the opportunities presented by advanced functional nanomaterials in meeting these challenges and potentially opening new dimensions for breast reconstruction. STATEMENT OF SIGNIFICANCE: Breast cancer is a significant cause of morbidity and mortality in women worldwide, which is difficult to prevent or predict, and its treatment carries long-term physiological and psychological consequences. Post-mastectomy breast reconstruction addresses the cosmetic aspect of cancer treatment. Yet, drawbacks of current implants contribute to the development of implant-associated complications, which may lead to prolonged patient care, pain and loss of function. Nanomaterials can help resolve the intrinsic biomechanical mismatch between implant and tissues, enhance mechanical properties of soft implantable materials, and provide an alternative avenue for controlled drug delivery. Here, we explore advances in the use of functionalized nanomaterials to enhance the properties of breast implants, with representative examples that highlight the utility of nanomaterials in addressing key challenges associated with breast reconstruction.

Material-specific properties applied to an environmental risk assessment of engineered nanomaterials - implications on grouping and read-across concepts

Engineered nanomaterials (ENMs) are intentionally designed in different nano-forms of the same parent material in order to meet application requirements. Different grouping and read-across concepts are proposed to streamline risk assessments by pooling nano-forms in one category. Environmental grouping concepts still are in their infancy and mainly focus on grouping by hazard categories. Complete risk assessments require data on environmental release and exposure not only for ENMs but also for their nano-forms. The key requirement is to identify and to distinguish the production volumes of the ENMs regarding nano-form-specific applications. The aim of our work was to evaluate whether such a grouping is possible with the available data and which influence it has on the environmental risk assessment of ENMs. A functionality-driven approach was applied to match the material-specific property (i.e. crystal form/morphology) with the functions employed in the applications. We demonstrate that for nano-TiO₂, carbon nanotubes (CNTs), and nano-Al₂O₃ the total production volume can be allocated to specific nano-forms based on their functionalities. The differentiated assessments result in a variation of the predicted environmental concentrations for anatase vs. rutile nano-TiO₂, single-wall vs. multi-wall CNTs and α- vs. γ-nano-Al₂O₃ by a factor of 2 to 13. Additionally, the nano-form-specific predicted no-effect concentrations for these ENMs were derived. The risk quotients for all nano-forms indicated no immediate risk in freshwaters. Our results suggest that grouping and read-across concepts should include both a nano-form release potential for estimating the environmental exposure and separately consider the nano-forms in environmental risk assessments.

A Precautionary Approach to Guide the Use of Transition Metal-Based Nanotechnology to Prevent Orthopedic Infections

The increase of multidrug-resistant bacteria remains a global concern. Among the proposed strategies, the use of nanoparticles (NPs) alone or associated with orthopedic implants represents a promising solution. NPs are well-known for their antimicrobial effects, induced by their size, shape, charge, concentration and reactive oxygen species (ROS) generation. However, this non-specific cytotoxic potential is a powerful weapon effective against almost all microorganisms, but also against eukaryotic cells, raising concerns related to their safe use. Among the analyzed transition metals, silver is the most investigated element due to its antimicrobial properties per se or as NPs; however, its toxicity raises questions about its biosafety. Even though it has milder antimicrobial and cytotoxic activity, TiO₂ needs to be exposed to UV light to be activated, thus limiting its use conjugated to orthopedic devices. By contrast, gold has a good balance between antimicrobial activity as an NP and cytocompatibility because of its inability to generate ROS. Nevertheless, although the toxicity and persistence of NPs within filter organs are not well verified, nowadays, several basic research on NP development and potential uses as antimicrobial weapons is reported, overemphasizing NPs potentialities, but without any existing potential of translation in clinics. This analysis cautions readers with respect to regulation in advancing the development and use of NPs. Hopefully, future works in vivo and clinical trials will support and regulate the use of nano-coatings to guarantee safer use of this promising approach against antibiotic-resistant microorganisms.

Outsmarting superbugs: bactericidal activity of nanostructured titanium surfaces against methicillin- and gentamicin-resistantStaphylococcus aureusATCC 33592

The colonisation of biomaterial surfaces by pathogenic bacteria is a significant issue of concern, particularly in light of the rapid rise of antibiotic resistance.

Cationic Silver Nanoclusters as Potent Antimicrobials against Multidrug-Resistant Bacteria

Bacterial multidrug resistance (MDR) is a serious healthcare issue caused by the long-term subtherapeutic clinical treatment of infectious diseases. Nanoscale engineering of metal nanoparticles has great potential to address this issue by tuning the nano-bio interface to target bacteria. Herein, we report the use of branched polyethylenimine-functionalized silver nanoclusters (bPEI-Ag NCs) to selectively kill MDR pathogenic bacteria by combining the antimicrobial activity of silver with the selective toxicity of bPEI toward bacteria. The minimum inhibitory concentration of bPEI-Ag NCs was determined against 12 uropathogenic MDR strains and found to be 10- to 15-fold lower than that of PEI and 2- to 3-fold lower than that of AgNO₃ alone. Cell viability and hemolysis assays demonstrated the biocompatibility of bPEI-Ag NCs with human fibroblasts and red blood cells, with selective toxicity against MDR bacteria.

Antimicrobial Imidazolium Ionic Liquids for the Development of Minimal Invasive Calcium Phosphate-Based Bionanocomposites

Biofilm formation is one of the main obstacles that occur during in vivo implantation, which compromises the implant functionality and patients' health. This is the inspiration for the development of novel implant materials that contain broad-spectrum antimicrobial activity, including antibacterial and antifungal, and enable the local release of antimicrobial agents. Here, multifunctional calcium phosphate-ionic liquid (IL) materials, possessing antimicrobial and repair/regeneration features plus injectability, are proposed as implants in minimally invasive surgery. This approach was based on the loading of 1-alkyl-3-alkylimidazolium chloride ionic liquids (ILs) (C _nMImCl ( n = 4, 10, 16) and (C₁₀)₂MImCl) during the in situ sol-gel synthesis of calcium phosphates (CaP) and study of their effects on CaP crystallization and biological properties. Physical, morphological, and biological investigations were performed to evaluate the bionanocomposites' properties. The IL N-alkyl chain length influenced the crystallization of CaP and, consequently, the biological properties, which afforded bionanocomposites (when loaded with C₁₆MImCl or (C₁₀)₂MImCl) that, (i) inhibit both in vitro bacterial and fungal growth; (ii) reduce the in vitro inflammatory response; (iii) induce osteogenic differentiation in the basal medium of human mesenchymal stem cells; and (iv) are injectable. This will enable the design of multifunctional injectable implants with antimicrobial, anti-inflammatory, and regenerative properties to be used in minimally invasive surgery of bone and maxillofacial defects.

Biosynthesis and Potential Applications of Silver and Gold Nanoparticles and Their Chitosan-Based Nanocomposites in Nanomedicine

Biosynthesized or biogenic metallic nanoparticles, particularly silver and gold nanoparticles (AgNPs and AuNPs, respectively), have been increasingly used because of their advantages, including high stability and loading capacity; moreover, these nanoparticles are synthesized using a green and cost-effective method. Previous studies have investigated reducing and/or stabilizing agents from various biological sources, including plants, microorganisms, and marine-derived products, using either a one-pot or a multistep process at different conditions. In addition, extensive studies have been performed to determine the biological or pharmacological effects of these nanoparticles, such as antimicrobial, antitumor, anti-inflammatory, and antioxidant effects. In the recent years, chitosan, a natural cationic polysaccharide, has been increasingly investigated as a reducing and/or stabilizing agent in the synthesis of biogenic metallic nanoparticles with potential applications in nanomedicine. Here, we have reviewed the mechanism of biosynthesis and potential applications of AgNPs and AuNPs and their chitosan-mediated nanocomposites in nanomedicine.

Microwave assisted κ-carrageenan capped silver nanocomposites for eradication of bacterial biofilms

Maturation of bacterial biofilms and their resistance to recurrent antimicrobial agents results in convoluted infectious diseases. In the current study, kappa-Carrageenan (κ-Carrageenan/CRG), was used to formulate CRG-silver nanocomposites through a facile microwave green synthesis approach. CRG-Ag nanoparticles of size 50 ± 10 nm were obtained by using CRG as a reducing and stabilizing agent. CRG-Ag nanoparticles were highly effective against both S. aureus and P. aeruginosa mediated biofilms and acted as a broad spectrum antibacterial agent even after six months. CRG-Ag nanoparticles encapsulated in KCl cross-linked hydrogel also exhibited excellent thermal stability, and antimicrobial potency. All these results depict that CRG-Ag nanocomposites appear as a promising approach to eradicate bacterial biofilms in food packaging and biomedical applications.

Fabrication of MgO nanostructures and its efficient photocatalytic, antibacterial and anticancer performance

Magnesium oxide (MgO) nanostructures were prepared using microwave-assisted (M 1) and hydrothermal (M 2) methods and characterized by XRD, SEM and FT-IR. It exhibits cubic structure with an average crystallite size of 20 nm (M 1) and 14 nm (M 2) and the lattice strain (WH plot) is 0.0017 (M 1), 0.0037 (M 2). It's spherical and rods like structures are confirmed through SEM and TEM. The vibrational stretching mode of MgO is 439 (M 1) and 449 cm^-1 (M 2). The optical bandgap is estimated as 5.93 eV (M 1) and 5.85 eV (M 2) through UV-Vis spectra. The fluorescence spectrum shows emission peaks at 414 and 437 (M 1) and 367 and 385 nm (M 2). The photodegradation studies of MgO nanostructures were assessed by monitoring the decolorization of methylene blue and Congo red dyes in aqueous solution under sunlight irradiation. The antibacterial activities of M 1 and M 2 are investigated against the gram-negative (Escherichia coli, Shigella flexneri, Salmonella typhi, Proteus mirabilis, Aeromonas hydrophila and Vibrio cholera) and gram-positive (Bacillus subtilis and Rhodococcus rhodochrous) bacteria. The zone of inhibition of 24 (M 1) and 25 mm (M 2) indicates high antibacterial activity towards the gram negative bacterium A. hydrophila. Confocal laser scanning microscopic (CLSM) analysis was utilized for understanding the variation in antibacterial activity between different orientations of MgO nanostructures. The cytotoxicity assay confirmed that the prepared nanostructures are non - toxic to normal healthy RBC's. In-vitro anticancer efficiency (IC₅₀) of MgO nanostructures against human lung cancer cell line (A549) was investigated.

Biogenic selenium nanoparticles synthesized by Stenotrophomonas maltophilia SeITE02 loose antibacterial and antibiofilm efficacy as a result of the progressive alteration of their organic coating layer

Increasing emergence of drug-resistant microorganisms poses a great concern to clinicians; thus, new active products are urgently required to treat a number of infectious disease cases. Different metallic and metalloid nanoparticles have so far been reported as possessing antimicrobial properties and proposed as a possible alternative therapy against resistant pathogenic microorganisms. In this study, selenium nanoparticles (SeNPs) synthesized by the environmental bacterial isolate Stenotrophomonas maltophilia SeITE02 were shown to exert a clear antimicrobial and antibiofilm activity against different pathogenic bacteria, either reference strains or clinical isolates. Antimicrobial and antibiofilm capacity seems to be strictly linked to the organic cap surrounding biogenic nanoparticles, although the actual role played by this coating layer in the biocidal action remains still undefined. Nevertheless, evidence has been gained that the progressive loss in protein and carbohydrate content of the organic cap determines a decrease in nanoparticle stability. This leads to an alteration of size and electrical properties of SeNPs along with a gradual attenuation of their antibacterial efficacy. Denaturation of the coating layer was proved even to have a negative effect on the antibiofilm activity of these nanoparticles. The pronounced antimicrobial efficacy of biogenic SeNPs compared to the denatured ones can - in first instance - be associated with their smaller dimensions. This study showed that the native organic coating layer of biogenic SeNPs functions in avoiding aggregation and maintaining electrostatic stability of the nanoparticles, thus allowing them to maintain efficient antimicrobial and antibiofilm capabilities.

In vitro antibacterial effects of zinc oxide nanoparticles on multiple drug-resistant strains of Staphylococcus aureus and Escherichia coli: An alternative approach for antibacterial therapy of mastitis in sheep

AIM

The aim of the study was to evaluate the antibacterial effects of zinc oxide nanoparticles (ZnO-NPs) and its possible alternative use for the treatment for mastitis in sheep and to determine the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of ZnO-NPs against multidrug-resistant Staphylococcus aureus and Escherichia coli strains isolated from subclinical mastitis cases in sheep.

MATERIALS AND METHODS

A total of 50 pooled milk samples were collected from ewes with subclinical mastitis. Milk samples were cultured using standard laboratory techniques, and multidrug-resistant bacterial strains were determined using the Kirby-Bauer disk diffusion method. The MIC and MBC of ZnO-NPs were determined against isolated multidrug-resistant S. aureus and E. coli strains using microwell dilution method.

RESULTS

A total of 43 different bacterial isolates were recovered from milk samples of ewes affected with subclinical mastitis. Isolated strains of S. aureus and E. coli were found resistant to three or more common antibacterial agents and were used to determine the MIC and MBC of ZnO-NPs. The MIC and MBC values of ZnO-NPs were significantly lower for S. aureus than that for E. coli. The MIC and MBC of ZnO-NPs against S. aureus were 3.9 µg/ml and 7.81 µg/ml, respectively, while for E. coli, the MIC and MBC of ZnO-NPs were 31.25 µg/ml and 62.5 µg/ml, respectively.

CONCLUSION

Results of this study indicate the potential antibacterial effects of ZnO-NPs against multidrug-resistant S. aureus and E. coli isolated from ovine subclinical mastitis at concentrations of 3.9 µg/ml and 31.25 µg/ml, respectively.

Polyethylene glycol-coated zinc oxide nanoparticle: an efficient nanoweapon to fight against herpes simplex virus type 1

AIM

We aimed to determine the possible inhibitory effects of zinc oxide nanoparticles (ZnO-NPs) and polyethylene glycol (PEG)-coated ZnO-NPs (ZnO-PEG-NPs) on herpes simplex virus type 1 (HSV-1).

MATERIALS & METHODS

PEGylated ZnO-NPs were synthesized by the mechanical method. Antiviral activity was assessed by 50% tissue culture infectious dose (TCID₅₀) and real-time PCR assays. To confirm the antiviral activity of ZnO-NPs on expression of HSV-1 antigens, indirect immunofluorescence assay was also conducted.

RESULTS

200 μg/ml ZnO-PEG-NPs could result in 2.5 log₁₀ TCID₅₀ reduction in virus titer, with inhibition rate of approximately 92% in copy number of HSV-1 genomic DNA.

CONCLUSION

ZnO-PEG-NPs could be proposed as a new agent for efficient HSV-1 inhibition. Our results indicated that PEGylation is effective in reducing cytotoxicity and increasing antiviral activity of nanoparticles.

Effect of Morphology and Concentration on Crossover between Antioxidant and Pro-oxidant Activity of MgO Nanostructures

The toxicity of nanomaterials can sometimes be attributed to photogenerated reactive oxygen species (ROS), but these ROS can also be scavenged by nanomaterials, yielding opportunities for crossover between the properties. The morphology of nanomaterials also influences such features due to defect-induced properties. Here we report morphology-induced crossover between pro-oxidant activity (ROS generation) and antioxidant activity (ROS scavenging) of MgO. To study this process in detail, we prepared three different nanostructures of MgO (nanoparticles, nanoplates, and nanorods) and characterized them by HRTEM. These three nanostructures effectively generate superoxide anions (O₂^•-) and hydroxyl radicals (^•OH) at higher concentrations (>500 μg/mL) but scavenge O₂^•- at lower concentrations (40 μg/mL) with successful crossover at 200 μg/mL. Nanorods of MgO generate the highest levels of O₂^•-, whereas nanoparticles scavenge O₂^•- to the highest extent (60%). Photoluminescence studies reveal that such crossover is based on the suppression of F²⁺ and the evolution of F⁺, F₂⁺, and F₂³⁺ defect centers. The evolution of these defect centers reflects the antibacterial activity of MgO nanostructures which is initiated at 200 μg/mL against Gram-positive S. aureus ATCC 29737 and among different bacterial strains including Gram-positive B. subtilis ATCC 6633 and M. luteus ATCC 10240 and Gram-negative E. coli ATCC K88 and K. pneumoniae ATCC 10031. Nanoparticles exhibited the highest antibacterial (92%) and antibiofilm activity (17%) against B. subtilis ATCC 6633 in the dark. Interestingly, the nitrogen-centered free radical DPPH is scavenged (100%) by nanoplates due to its large surface area (342.2 m²/g) and the presence of the F₂⁺ defect state. The concentration-dependent interaction with an antioxidant defense system (ascorbic acid (AA)) highlights nanoparticles as potent scavengers of O₂^•- in the dark. Thus, our findings establish guidelines for the selection of MgO nanostructures for diverse therapeutic applications.

Synergistic effect of cellulose nanofibres and bio- extracts for fabricating high strength sodium alginate based composite bio-sponges with antibacterial properties

This study investigates the synergistic potential of natural bio-extracts for preparing "all-natural" composite bio-sponges of sodium alginate (SA) with the reinforcement of a natural bio-nanomaterial i.e., cellulose nanofibres (CNFs). Aqueous suspensions of SA and CNFs in various combinations of bio-extracts (Rice water (Rw) and Giloy extract (Ge)) were freeze-dried to obtain the composite bio-sponges. Composites prepared using Rw resulted in structurally more stable samples with porosity above 75% that showed a compact honeycomb-like microstructure with interlocked CNFs network structures. A significant improvement in mechanical performance (400% increment in compressive strength and 800% increment in modulus) and thermal stability (decomposition temperature reaching up to 240 °C from 200 °C) for SA based composite bio-sponges was achieved due to the synergistic effect of Rw and CNFs as compared to conventionally prepared sponges in water. Additionally, the use of Ge has resulted in developing antimicrobial surfaces with up to 98% and 90% growth inhibition efficiency for gram-negative and gram-positive bacteria, respectively. Hence, CNFs and bio-extracts together played a competent role in effective tailoring of structural, thermo-mechanical and antibacterial properties of composite bio-sponges.

Antibiotics, Resistome and Resistance Mechanisms: A Bacterial Perspective

History of mankind is regarded as struggle against infectious diseases. Rather than observing the withering away of bacterial diseases, antibiotic resistance has emerged as a serious global health concern. Medium of antibiotic resistance in bacteria varies greatly and comprises of target protection, target substitution, antibiotic detoxification and block of intracellular antibiotic accumulation. Further aggravation to prevailing situation arose on observing bacteria gradually becoming resistant to different classes of antibiotics through acquisition of resistance genes from same and different genera of bacteria. Attributing bacteria with feature of better adaptability, dispersal of antibiotic resistance genes to minimize effects of antibiotics by various means including horizontal gene transfer (conjugation, transformation, and transduction), Mobile genetic elements (plasmids, transposons, insertion sequences, integrons, and integrative-conjugative elements) and bacterial toxin-antitoxin system led to speedy bloom of antibiotic resistance amongst bacteria. Proficiency of bacteria to obtain resistance genes generated an unpleasant situation; a grave, but a lot unacknowledged, feature of resistance gene transfer.

Electrospun Nanomaterials Implementing Antibacterial Inorganic Nanophases

Electrospinning is a versatile, simple, and low cost process for the controlled production of fibers. In recent years, its application to the development of multifunctional materials has encountered increasing success. In this paper, we briefly overview the general aspects of electrospinning and then we focus on the implementation of inorganic nanoantimicrobials, e.g., nanosized antimicrobial agents in electrospun fibers. The most relevant characteristics sought in nanoantimicrobials supported on (or dispersed into) polymeric materials are concisely discussed as well. The interesting literature issued in the last decade in the field of antimicrobial electrospun nanomaterials is critically described. A classification of the most relevant studies as a function of the different approaches chosen for incorporating nanoantimicrobials in the final material is also provided.

Fabrication and Characterization of an Electrospun PHA/Graphene Silver Nanocomposite Scaffold for Antibacterial Applications

Many wounds are unresponsive to currently available treatment techniques and therefore there is an immense need to explore suitable materials, including biomaterials, which could be considered as the crucial factor to accelerate the healing cascade. In this study, we fabricated polyhydroxyalkanoate-based antibacterial mats via an electrospinning technique. One-pot green synthesized graphene-decorated silver nanoparticles (GAg) were incorporated into the fibres of poly-3 hydroxybutarate-co-12 mol.% hydroxyhexanoate (P3HB-co-12 mol.% HHx), a co-polymer of the polyhydroxyalkanoate (PHA) family which is highly biocompatible, biodegradable, and flexible in nature. The synthesized PHA/GAg biomaterial has been characterized by field emission scanning electron microscopy (FESEM), elemental mapping, thermogravimetric analysis (TGA), UV-visible spectroscopy (UV-vis), and Fourier transform infrared spectroscopy (FTIR). An in vitro antibacterial analysis was performed to investigate the efficacy of PHA/GAg against gram-positive Staphylococcus aureus (S. aureus) strain 12,600 ATCC and gram-negative Escherichia coli (E. coli) strain 8739 ATCC. The results indicated that the PHA/GAg demonstrated significant reduction of S. aureus and E. coli as compared to bare PHA or PHA- reduced graphene oxide (rGO) in 2 h of time. The p value (p < 0.05) was obtained by using a two-sample t-test distribution.

Potential applications of engineered nanoparticles in medicine and biology: an update

Nanotechnology advancements have led to the development of its allied fields, such as nanoparticle synthesis and their applications in the field of biomedicine. Nanotechnology driven innovations have given a hope to the patients as well as physicians in solving the complex medical problems. Nanoparticles with a size ranging from 0.2 to 100 nm are associated with an increased surface to volume ratio. Moreover, the physico-chemical and biological properties of nanoparticles can be modified depending on the applications. Different nanoparticles have been documented with a wide range of applications in various fields of medicine and biology including cancer therapy, drug delivery, tissue engineering, regenerative medicine, biomolecules detection, and also as antimicrobial agents. However, the development of stable and effective nanoparticles requires a profound knowledge on both physico-chemical features of nanomaterials and their intended applications. Further, the health risks associated with the use of engineered nanoparticles needs a serious attention.

Nano-Strategies to Fight Multidrug Resistant Bacteria-"A Battle of the Titans"

Infectious diseases remain one of the leading causes of morbidity and mortality worldwide. The WHO and CDC have expressed serious concern regarding the continued increase in the development of multidrug resistance among bacteria. Therefore, the antibiotic resistance crisis is one of the most pressing issues in global public health. Associated with the rise in antibiotic resistance is the lack of new antimicrobials. This has triggered initiatives worldwide to develop novel and more effective antimicrobial compounds as well as to develop novel delivery and targeting strategies. Bacteria have developed many ways by which they become resistant to antimicrobials. Among those are enzyme inactivation, decreased cell permeability, target protection, target overproduction, altered target site/enzyme, increased efflux due to over-expression of efflux pumps, among others. Other more complex phenotypes, such as biofilm formation and quorum sensing do not appear as a result of the exposure of bacteria to antibiotics although, it is known that biofilm formation can be induced by antibiotics. These phenotypes are related to tolerance to antibiotics in bacteria. Different strategies, such as the use of nanostructured materials, are being developed to overcome these and other types of resistance. Nanostructured materials can be used to convey antimicrobials, to assist in the delivery of novel drugs or ultimately, possess antimicrobial activity by themselves. Additionally, nanoparticles (e.g., metallic, organic, carbon nanotubes, etc.) may circumvent drug resistance mechanisms in bacteria and, associated with their antimicrobial potential, inhibit biofilm formation or other important processes. Other strategies, including the combined use of plant-based antimicrobials and nanoparticles to overcome toxicity issues, are also being investigated. Coupling nanoparticles and natural-based antimicrobials (or other repurposed compounds) to inhibit the activity of bacterial efflux pumps; formation of biofilms; interference of quorum sensing; and possibly plasmid curing, are just some of the strategies to combat multidrug resistant bacteria. However, the use of nanoparticles still presents a challenge to therapy and much more research is needed in order to overcome this. In this review, we will summarize the current research on nanoparticles and other nanomaterials and how these are or can be applied in the future to fight multidrug resistant bacteria.

Recent Advances in the Development of Antimicrobial Nanoparticles for Combating Resistant Pathogens

The rapid growth of harmful pathogens and their multidrug-resistance poses a severe challenge for health professionals and for the development of new healthcare products. Various strategies are exploited for the development of effective antimicrobial agents, and nanoparticles are a particularly promising class of materials in this respect. This review summarizes recent advances in antimicrobial metallic, polymeric, and lipid-based nanoparticles such as liposomes, solid lipid nanoparticles, and nanostructured lipid carriers. The latter materials in particular are engineered for antimicrobial agent delivery and act by encapsulation, receptor-based binding, and disruption of microbial adherence to cellular substrates. Potential strategies for the design of multifunctional antimicrobial nanocarriers, combining material chemistry and biological interface science, are also discussed.

Effects of hexagonal boron nitride nanoparticles on antimicrobial and antibiofilm activities, cell viability

The objective of this work was to investigate the antimicrobial and antibiofilm activities of hBN nanoparticles against Streptococcus mutans 3.3, Staphylococcus pasteuri M3, Candida sp. M25 and S. mutans ATTC 25175. Minimum Inhibitory Concentration (MIC) of hBN nanoparticles were determined against Streptococcus mutans 3.3, Staphylococcus pasteuri M3, Candida sp. M25 growth. In addition, we aimed to evaluate the cytotoxic effects of hBN nanoparticles on human normal skin fibroblast (CCD-1094Sk, ATCC® CRL 2120 ™) and Madin Darby Canine Kidney (MDCK) cells by using various toxicological endpoints. Cell viability was assessed by MTT, SRB and PicoGreen assays. After experimental analyses, it was revealed that hBN nanoparticles show better MIC results. The MIC values were higher for Streptococcus mutans ATTC 25175 and Staphylococcus pasteuri M3 and lower against Streptococcus mutans 3.3, Candida sp. M25. Surprisingly, hBN nanoparticles showed a high antibiofilm activity on preformed biofilm, which inhibited biofilm growth of S. mutans 3.3, S. mutans ATTC 25175 and Candida sp.M25. These results show that hBN nanoparticles may be an option to control oral biofilms. In cell viability tests, the cells were exposed to 0.025-0.4 mg/mL concentrations of hBN nano particle suspension. The exposure time to the hBN nanoparticle suspensions were 24 h and 48 h. The results indicate that there is no cytotoxic effect on CRL 2120 and MDCK cells at the concentration range of 0.025-0.1 mg/mL. However, on both first and second day, hBN caused mild cytotoxicity on CRL-2120 cells at high hBN concentration (0.2-0.4 mg/mL). Considering all the results of this study, in appropriate concentration (0.1 mg/mL) hBN nanoparticles can be considered a potential safe oral care product.

Biofilms in the Food Industry: Health Aspects and Control Methods

Diverse microorganisms are able to grow on food matrixes and along food industry infrastructures. This growth may give rise to biofilms. This review summarizes, on the one hand, the current knowledge regarding the main bacterial species responsible for initial colonization, maturation and dispersal of food industry biofilms, as well as their associated health issues in dairy products, ready-to-eat foods and other food matrixes. These human pathogens include Bacillus cereus (which secretes toxins that can cause diarrhea and vomiting symptoms), Escherichia coli (which may include enterotoxigenic and even enterohemorrhagic strains), Listeria monocytogenes (a ubiquitous species in soil and water that can lead to abortion in pregnant women and other serious complications in children and the elderly), Salmonella enterica (which, when contaminating a food pipeline biofilm, may induce massive outbreaks and even death in children and elderly), and Staphylococcus aureus (known for its numerous enteric toxins). On the other hand, this review describes the currently available biofilm prevention and disruption methods in food factories, including steel surface modifications (such as nanoparticles with different metal oxides, nanocomposites, antimicrobial polymers, hydrogels or liposomes), cell-signaling inhibition strategies (such as lactic and citric acids), chemical treatments (such as ozone, quaternary ammonium compounds, NaOCl and other sanitizers), enzymatic disruption strategies (such as cellulases, proteases, glycosidases and DNAses), non-thermal plasma treatments, the use of bacteriophages (such as P100), bacteriocins (such us nisin), biosurfactants (such as lichenysin or surfactin) and plant essential oils (such as citral- or carvacrol-containing oils).

Nanocoatings for Chronic Wound Repair-Modulation of Microbial Colonization and Biofilm Formation

Wound healing involves a complex interaction between immunity and other natural host processes, and to succeed it requires a well-defined cascade of events. Chronic wound infections can be mono- or polymicrobial but their major characteristic is their ability to develop a biofilm. A biofilm reduces the effectiveness of treatment and increases resistance. A biofilm is an ecosystem on its own, enabling the bacteria and the host to establish different social interactions, such as competition or cooperation. With an increasing incidence of chronic wounds and, implicitly, of chronic biofilm infections, there is a need for alternative therapeutic agents. Nanotechnology shows promising openings, either by the intrinsic antimicrobial properties of nanoparticles or their function as drug carriers. Nanoparticles and nanostructured coatings can be active at low concentrations toward a large variety of infectious agents; thus, they are unlikely to elicit emergence of resistance. Nanoparticles might contribute to the modulation of microbial colonization and biofilm formation in wounds. This comprehensive review comprises the pathogenesis of chronic wounds, the role of chronic wound colonization and infection in the healing process, the conventional and alternative topical therapeutic approaches designed to combat infection and stimulate healing, as well as revolutionizing therapies such as nanotechnology-based wound healing approaches.

Prospects of Nanostructure Materials and Their Composites as Antimicrobial Agents

Nanostructured materials (NSMs) have increasingly been used as a substitute for antibiotics and additives in various products to impart microbicidal effect. In particular, use of silver nanoparticles (AgNPs) has garnered huge researchers' attention as potent bactericidal agent due to the inherent antimicrobial property of the silver metal. Moreover, other nanomaterials (carbon nanotubes, fullerenes, graphene, chitosan, etc.) have also been studied for their antimicrobial effects in order ensure their application in widespread domains. The present review exclusively emphasizes on materials that possess antimicrobial activity in nanoscale range and describes their various modes of antimicrobial action. It also entails broad classification of NSMs along with their application in various fields. For instance, use of AgNPs in consumer products, gold nanoparticles (AuNPs) in drug delivery. Likewise, use of zinc oxide nanoparticles (ZnO-NPs) and titanium dioxide nanoparticles (TiO₂-NPs) as additives in consumer merchandises and nanoscale chitosan (NCH) in medical products and wastewater treatment. Furthermore, this review briefly discusses the current scenario of antimicrobial nanostructured materials (aNSMs), limitations of current research and their future prospects. To put various perceptive insights on the recent advancements of such antimicrobials, an extended table is incorporated, which describes effect of NSMs of different dimensions on test microorganisms along with their potential widespread applications.